JD eng 5.QXP 3/4/2015 2:50 PM Page 6
Driving your vehicle
ON
Ignition switch position
LOCK
WARNING - Ignition key
The warning lights can be checked
before the engine is started. This is the
normal running position after the engine
is started.
• Never turn the ignition switch to
LOCK or ACC while the vehicle is
moving.This would result in loss of
directional control and braking
function, which could cause an
accident.
The steering wheel locks to protect
against theft. The ignition key can be
removed only in the LOCK position.
When turning the ignition switch to the
LOCK position, push the key inward at
the ACC position and turn the key toward
the LOCK position.
Do not leave the ignition switch ON if the
engine is not running to prevent battery
discharge.
• The anti-theft steering column lock
(if equipped) is not a substitute for
the parking brake. Before leaving
the driver’s seat, always make sure
the shift lever is engaged in 1st gear
for the manual transaxle or P (Park)
for the automatic transaxle, set the
parking brake fully and shut the
engine off. Unexpected and sud-
den vehicle movement may occur if
these precautions are not taken.
START
Turn the ignition key to the START posi-
tion to start the engine. The engine will
crank until you release the key; then it
returns to the ON position. The brake
warning lamp can be checked in this
position.
ACC (Accessory)
The steering wheel is unlocked and elec-
trical accessories are operative.
✽
NOTICE
If difficulty is experienced turning the
ignition switch to the ACC position, turn
the key while turning the steering wheel
right and left to release the tension.
• Never reach for the ignition switch,
or any other controls through the
steering wheel while the vehicle is
in motion. The presence of your
hand or arm in this area could
cause a loss of vehicle control, an
accident and serious bodily injury
or death.
• Do not place any movable objects
around the driver’s seat as they
may move while driving, interfere
with the driver and lead to an acci-
dent.
5 6
English 
