2011-2017 Kia Picanto 4 Door Driving your vehicle -> Starting the engine User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving your vehicle -> Starting the engine for Your Kia Picanto 4 Door Second Generation (2011-2017)

Driving your vehicle  
STARTING THE ENGINE  
WARNING  
• Always wear appropriate shoes  
when operating your vehicle.  
Unsuitable shoes (high heels, ski  
boots,etc.) may interfere with your  
ability to use the brake, accelera-  
tor pedal, and clutch (if equipped).  
Starting the engine with an igni-  
tion key (if equipped)  
CAUTION  
If the engine stalls while the vehicle  
is in motion, do not attempt to move  
the shift lever to the P (Park) posi-  
tion. If traffic and road conditions  
permit, you may put the shift lever in  
the N (Neutral) position while the  
vehicle is still moving and turn the  
ignition switch to the START position  
in an attempt to restart the engine.  
1. Make sure the parking brake is  
applied.  
2. Manual Transaxle - Depress the  
clutch pedal fully and shift the  
transaxle into Neutral. Keep the clutch  
pedal and brake pedal depressed  
while turning the ignition switch to the  
start position.  
• Do not start the vehicle with the  
accelerator pedal depressed. The  
vehicle can move and lead to an  
accident.  
Automatic Transaxle - Place the  
transaxle shift lever in P (Park).  
Depress the brake pedal fully.  
• Wait until the engine rpm is normal.  
The vehicle may suddenly move if  
the brake padel is released when  
the rpm is high.  
CAUTION  
You can also start the engine when  
the shift lever is in the N (Neutral)  
position.  
• Do not engage the starter for  
more than 10 seconds. If the  
engine stalls or fails to start, wait  
5 to 10 seconds before re-engag-  
ing the starter. Improper use of  
the starter may damage it.  
3. Turn the ignition switch to START and  
hold it there until the engine starts (a  
maximum of 10 seconds), then  
release the key.  
• Do not turn the ignition switch to  
the START position with the  
engine running. It may damage  
the starter.  
It should be started without depressing  
the accelerator.  
4. Do not wait for the engine to warm up  
while the vehicle remains stationary.  
Start driving at moderate engine  
speeds. (Steep accelerating and  
decelerating should be avoided.)  
5 9  
Driving your vehicle  
1. Carry the smart key or leave it inside  
the vehicle.  
CAUTION  
If the engine stalls while you are in  
motion, do not attempt to move the  
shift lever to the P (Park) position. If  
traffic and road conditions permit,  
you may put the shift lever in the N  
(Neutral) position while the vehicle  
is still moving and press the  
ENGINE START/STOP button in an  
attempt to restart the engine.  
2. Make sure the parking brake is firmly  
applied.  
3. Manual Transaxle - Depress the  
clutch pedal fully and shift the  
transaxle into Neutral. Keep the clutch  
pedal and brake pedal depressed  
while starting the engine.  
Automatic Transaxle - Place the  
transaxle shift lever in P (Park).  
Depress the brake pedal fully.  
OTA050003  
You can also start the engine when  
the shift lever is in the N (Neutral)  
position.  
• Even if the smart key is in the vehicle,  
if it is far away from you, the engine  
may not start.  
Starting the engine with a smart  
key (if equipped)  
4. Press the ENGINE START/STOP but-  
ton.  
• When the ENGINE START/STOP but-  
ton is in the ACC position or above, if  
any door is opened, the system checks  
for the smart key. If the smart key is not  
WARNING  
It should be started without depressing  
the accelerator.  
Always wear appropriate shoes  
when operating your vehicle.  
Unsuitable shoes (high heels, ski  
boots, etc.) may interfere with your  
ability to use the brake and acceler-  
ator pedal.  
5. Do not wait for the engine to warm up  
while the vehicle remains stationary.  
in the vehicle, the “  
”or “KEY OUT”  
indicator will blink. And if all doors are  
closed, the chime will sound for 5 sec-  
onds. The warning will turn off while  
the vehicle is moving. Always have the  
smart key with you.  
Start driving at moderate engine  
speeds. (Steep accelerating and  
decelerating should be avoided.)  
5 10  
Driving your vehicle  
Type A  
(Continued)  
• When the stop lamp fuse is blown, you  
can't start the engine normally.  
Replace the fuse with a new one. If it  
is not possible, you can start the  
engine by pressing the ENGINE  
START/STOP button for 10 seconds  
while it is in the ACC position. The  
engine can start without depressing  
the brake pedal. But for your safety  
always depress the brake pedal before  
starting the engine.  
WARNING  
The engine will start by pressing the  
ENGINE START/STOP button, only  
when the smart key is in the vehicle.  
Never allow children or any person  
who is unfamiliar with the vehicle to  
touch the ENGINE START/STOP but-  
ton or related parts.  
OTA053004  
Type B  
CAUTION  
Do not press the ENGINE START/  
STOP button for more than 10 sec-  
onds except when the stop lamp  
fuse is blown.  
OTA052004  
NOTICE  
• If the battery is weak or the smart key  
does not work correctly, you can start  
the engine by pressing the engine  
start/stop button with the smart key.  
(Continued)  
5 11  

Related Topics

Popular Owner Manuals