Get Features of your vehicle -> Audio system Guide for Kia Picanto 4 Door Second Generation (2011-2017)

Features of your vehicle

AUDIO SYSTEM

✽

NOTICE

CAUTION

If you install an aftermarket HID head

lamp, your vehicle’s audio and electron-

ic device may malfunction.

• Before entering a place with a low

height clearance or a car wash,

remove surely the antenna by

rotating it counter-clockwise. If

not, the antenna may be dam-

aged.

• When reinstalling your antenna, it

is important that it is fully tight-

ened and adjusted to the upright

position to ensure proper recep-

tion. But it could be removed

when parking the vehicle or when

loading cargo on the roof rack.

OTA040097

Antenna

Roof antenna

• When cargo is loaded on the roof

rack, do not place the cargo near

the antenna pole to ensure proper

reception.

Your car uses a roof antenna to receive

both AM and FM broadcast signals. This

antenna is a removable type. To remove

the antenna, turn it counterclockwise. To

install the antenna, turn it clockwise.

4 109

Features of your vehicle

Steering wheel audio controls

(if equipped)

■ Type A

SEEK/PRESET (

/

) (2)

The SEEK/PRESET lever has different

functions based on the system mode. For

the following functions the lever should

be pressed for 0.8 seconds or more.

The steering wheel may incorporate

audio control buttons.

CAUTION

Do not operate audio remote con-

trol buttons simultaneously.

RADIO mode

It will function as the AUTO SEEK select

button.

■ Type B

CD/USB/iPod mode

It will function as the FF/REW button.

VOLUME ( / ) (1)

• Press the lever upward ( ) to increase

the volume.

If the SEEK/PRESET button is pressed

for less than 0.8 seconds, it will work as

follows in each mode.

• Press the lever downward ( ) to

decrease the volume.

RADIO mode

It will function as the PRESET STATION

buttons.

■ Type C

CD/USB/iPod mode

It will function as TRACK UP/DOWN but-

ton.

OTA040098L/OTA040099L/OTA040100L

4 110

Features of your vehicle

■ Type A

MODE ( ) (3)

Press the button to change audio source.

✽

NOTICE

When using a portable audio device

connected to the power outlet, noise may

occur during playback. If this happens,

use the power source of the portable

audio device.

FM(1~2) ➟ AM ➟ CD ➟ USB AUX(iPod)

➟ FM...

In addition to mode change, Power on/off

can be made by pressing this button

when the ignition switch is on ACC or

ON.

iPod^®is a trademark of Apple Inc.

*

- Power ON : Press the button when the

audio is off

OTA040096

- Power OFF : Press the button for more

than 0.8 seconds when the audio is on.

■ Type B

MUTE ( ) (4, if equipped)

• Press the button to mute the sound.

• Press the button to turn off the micro-

phone during a telephone call.

Detailed information for audio control

buttons are described in the following

pages in this section.

OTA040091

Aux, USB and iPod port

(if equipped)

If your vehicle has an aux and/or

USB(universal serial bus) port or iPod

port, you can use an aux port to connect

audio devices and an USB port to plug in

an USB and also an iPod port to plug in

an iPod.

4 111

Features of your vehicle

FM reception

AM(MW, LW) reception

FM radio station

JBM001

JBM002

JBM003

AM (MW, LW) broadcasts can be

received at greater distances than FM

broadcasts. This is because AM(MW,

LW) radio waves are transmitted at low

frequencies. These long, low frequency

radio waves can follow the curvature of

the earth rather than travelling straight

out into the atmosphere. In addition, they

curve around obstructions so that they

can provide better signal coverage.

FM broadcasts are transmitted at high

frequencies and do not bend to follow the

earth's surface. Because of this, FM

broadcasts generally begin to fade at

short distances from the station. Also,

FM signals are easily affected by build-

ings, mountains, or other obstructions.

These can result in certain listening con-

ditions which might lead you to believe a

problem exists with your radio. The fol-

lowing conditions are normal and do not

indicate radio trouble:

How car audio works

AM (MW, LW) and FM radio signals are

broadcast from transmitter towers locat-

ed around your city. They are intercepted

by the radio antenna on your car. This

signal is then received by the radio and

sent to your car speakers.

When a strong radio signal has reached

your vehicle, the precise engineering of

your audio system ensures the best pos-

sible quality reproduction. However, in

some cases the signal coming to your

vehicle may not be strong and clear. This

can be due to factors such as the dis-

tance from the radio station, closeness of

other strong radio stations or the pres-

ence of buildings, bridges or other large

obstructions in the area.

4 112

Features of your vehicle

Using a cellular phone or a two-way

radio

When a cellular phone is used inside the

vehicle, noise may be produced from the

audio equipment. This does not mean

that something is wrong with the audio

equipment. In such a case, use the cellu-

lar phone at a place as far as possible

from the audio equipment.

CAUTION

When using a communication sys-

tem such a cellular phone or a radio

set inside the vehicle, a separate

external antenna must be fitted.

When a cellular phone or a radio set

is used with an internal antenna

alone, it may interfere with the vehi-

cle's electrical system and adverse-

ly affect safe operation of the vehi-

cle.

JBM004

JBM005

• Fading - As your car moves away from

the radio station, the signal will weaken

and sound will begin to fade. When this

occurs, we suggest that you select

another stronger station.

• Station Swapping - As a FM signal

weakens, another more powerful sig-

nal near the same frequency may

begin to play. This is because your

radio is designed to lock onto the clear-

est signal. If this occurs, select anoth-

er station with a stronger signal.

• Flutter/Static - Weak FM signals or

large obstructions between the trans-

mitter and your radio can disturb the

signal causing static or fluttering nois-

es to occur. Reducing the treble level

may lessen this effect until the distur-

bance clears.

• Multi-Path Cancellation - Radio signals

being received from several directions

can cause distortion or fluttering. This

can be caused by a direct and reflect-

ed signal from the same station, or by

signals from two stations with close

frequencies. If this occurs, select

another station until the condition has

passed.

WARNING

Don't use a cellular phone when

you are driving. You should stop at

a safe place to use a cellular phone.

4 113

Features of your vehicle

• Keep CDs in their cases after use to

protect them from scratches or dirt.

Care of discs

• If the temperature inside the car is too

high, open the car windows for ventila-

tion before using your car audio.

• Depending on the type of CD-R/CD-

RW CDs, certain CDs may not operate

normally depending upon manufactur-

ing companies or processes and

recording methods. In such circum-

stances, if you still continue to use

those CDs, they may cause the mal-

function of your car audio system.

• It is illegal to copy and use MP3/WMA

files without permission. Use CDs that

are created only by lawful means.

• Do not apply volatile agents such as

benzene and thinner, normal cleaners

and magnetic sprays made for ana-

logue disc onto CDs.

✽

NOTICE - Playing an

• To prevent the disc surface from get-

ting damaged. Hold and carry CDs by

the edges or the edges of the center

hole only.

Incompatible Copy

Protected Audio CD

Some copy protected CDs, which do not

comply with the international audio CD

standards (Red Book), may not play on

your car audio. Please note that if you

try to play copy protected CDs and the

CD player does not perform correctly

the CDs maybe defective, not the CD

player.

• Clean the disc surface with a piece of

soft cloth before playback (wipe it from

the center to the outside edge).

• Do not damage the disc surface or

attach pieces of sticky tape or paper

onto it.

• Make sure nothing other than CDs are

inserted into the CD player (Do not

insert more than one CD at a time).

4 114

Features of your vehicle

■

AC9901YGG (GENERAL)

❋There will be no

logo if the Bluetooth^®Wireless Technology feature is not supported.

TA_H800_GEN_AUDIO

4 115

Features of your vehicle

• Press CLOCK Button for 0.8 seconds or

longer to adjust clock setting mode and

Use the TUNE knob to adjust hour &

minute. And then push the TUNE knob

to set the time.

SEEK

3.

Button

SEEK

• When the

button is pressed, it

increases the band frequency to auto-

matically select channel. Stops at the

previous frequency if no channel is

• CLOCK MODE (at AUDIO ON)

found.

• When the

reduces the band frequency to auto-

matically select channel. Stops at the

previous frequency if no channel is

found.

To toggle clock mode on ↔ off repeat-

edly, press CLOCK button for less than

0.8 seconds.

TRACK

button is pressed, it

When clock mode is on and a func-

tion button is pressed, Information

associated with the function is dis-

played on LCD for a moment and then

LCD display comes back to clock

mode automatically.

TA_H800_GEN_AUDIO

Using RADIO, SETUP, VOLUME

and AUDIO CONTROL

FM/AM

1.

Button

❈ When audio is off, Clock mode is

displayed automatically.

Turns to FM/AM mode and toggles FM1

and FM2➟AM➟FM1··· when the button is

pressed each time.

TUNE

AUDIO

Knob

5.

&

Turn this control while listening to a radio

channel to manually adjust frequency.

POWER

VOLUME

Knob

2.

Button &

• Turns the audio system on/off when

the ignition switch is on ACC or ON.

Turn clockwise to increase frequency and

counterclockwise to reduce frequency.

TA_H800_GEN_AUDIO

• If the knob is turned clockwise/counter-

clockwise, the volume will increase

/decrease.

CLOCK

4.

Button

Pressing the button changes the BASS,

MIDDLE, TREBLE, FADER and BAL-

ANCE TUNE mode. The mode selected

is shown on the display. After selecting

each mode, rotate the Audio control knob

clockwise or counterclockwise.

Press CLOCK Button less than 0.8 sec-

onds to display the current clock until the

CLOCK Button push again.

Press CLOCK Button for 0.8 seconds or

longer to adjust clock and use the

TUNE knob to adjust hour & minute.

4 116

Features of your vehicle

• BASS Control

• BALANCE Control

Rotate the knob clockwise to emphasize

To increase the BASS, rotate the knob

clockwise, while to decrease the BASS,

rotate the knob counterclockwise.

right speaker sound(left speaker sound

will be attenuated).

TA_H800_GEN_AUDIO

When the control knob is turned counter

clockwise, left speaker sound will be

emphasized(right speaker sound will be

attenuated).

6. PRESET Buttons

1

• MIDDLE Control

To increase the MIDDLE, rotate the knob

• Press

~

6

buttons less

than 0.8 seconds to play the station

saved in each button.

clockwise, while to decrease the MID-

DLE, rotate the knob counterclockwise.

• Press

1

~

6

buttons more

than 0.8 seconds or longer to save the

current station to the respective button

with a beep.

• TREBLE Control

To increase the TREBLE, rotate the knob

clockwise, while to decrease the TRE-

BLE, rotate the knob counterclockwise.

• FADER Control

Turn the control knob clockwise to

emphasize rear speaker sound(front

speaker sound will be attenuated).

When the control knob is turned counter-

clockwise, front speaker sound will be

emphasized(rear speaker sound will be

attenuated).

4 117

Features of your vehicle

(Continued)

• An encrypted MP3 PLAYER is not

recognizable.

(Continued)

CAUTION IN USING

USB DEVICE

• To use an external USB device,

make sure the device is not con-

nected when starting up the vehi-

cle. Connect the device after

starting up.

• If you disconnect the external USB

device during playback in USB

mode, the external USB device can

be damaged or may malfunction.

Therefore, disconnect the external

USB device when the audio is

turned off or in another mode. (e.g,

Radio or CD)

• Depending on the condition of

the external USB device, the con-

nected external USB device can

be unrecognizable.

• When the formatted byte/sector

setting of External USB device is

not either 512BYTE or 2048BYTE,

then the device will not be recog-

nized.

• If you start the engine when the

USB device is connected, it may

damage the USB device. (USB

flashdrives are very sensitive to

electric shock.)

• Depending on the type and capacity

of the external USB device or the

type of the files stored in the device,

there is a difference in the time

taken for recognition of the device.

• Use only a USB device formatted

to FAT 12/16/32.

• If the engine is started up or

turned off while the external USB

device is connected, the external

USB device may not work.

• Do not use the USB device for pur-

poses other than playing music files.

• USB devices without USB I/F

authentication may not be recog-

nizable.

• Playing videos through the USB is

not supported.

• It may not play inauthentic MP3 or

WMA files.

• Make sure the USB connection

terminal does not come in contact

with the human body or other

objects.

• Use of USB accessories such as

rechargers or heaters using USB

I/F may lower performance or

cause trouble.

1) It can only play MP3 files with

the compression rate between

8Kbps~320Kbps.

• If you repeatedly connect or dis-

connect the USB device in a short

period of time, it may break the

device.

2) It can only play WMA music

files with the compression rate

between 8Kbps~320Kbps.

• If you use devices such as a USB

hub purchased separately, the

vehicle’s audio system may not

recognize the USB device. In that

case, connect the USB device

directly to the multimedia termi-

nal of the vehicle.

• Take precautions for static electrici-

ty when connecting or disconnect-

ing the external USB device.

• You may hear a strange noise

when connecting or disconnect-

ing a USB device.

(Continued)

4 118

Features of your vehicle

(Continued)

• If the USB device is divided by

logical drives, only the music files

on the highest-priority drive are

recognized by car audio.

• The data in the USB memory may

be lost while using this audio.

Always back up important data on

a personal storage device.

• Devices such as MP3 Player/

Cellular phone/Digital camera can

be unrecognizable by standard

USB I/F can be unrecognizable.

• Please avoid using USB memory

products which can be used as

key chains or cellular phone

accessories as they could cause

damage to the USB jack. Please

make certain only to use plug type

connector products as shown

below.

• Charging through the USB may

not be supported in some mobile

devices.

❋ A car exclusive cable (Provided or

sold separately : USB / AUX detach-

able cable only) is required to use

the iPod.

• Some non-standard USB devices

(METAL COVER TYPE USB) can be

unrecognizable.

• Some USB flash memory readers

(such as CF, SD, microSD, etc.) or

external-HDD type devices can be

unrecognizable.

• Music files protected by DRM

(DIGITAL RIGHTS MANAGEMENT)

are not recognizable.

(Continued)

4 119

Features of your vehicle

• Press the button for less than

0.8 seconds to move to the next song.

SEEK

FF

1

Press the

3.

Button (FAST FORWARD)

FF

button for 0.8 seconds

1

or longer to initiate forward direction high

speed sound search of current song.

REW

4

4.

Button (REWIND)

TA_H800_GEN_AUDIO

REW

Press

button for 0.8 seconds or

4

Using USB device

longer to initiate reverse direction high

speed sound search of current song.

SCAN

7.

Button

Plays each song in the USB device for 10

seconds.

AUX

1.

Button (USB or AUX)

RPT

2

Repeats the song currently played.

5.

Button (REPEAT)

If the auxiliary device is connected, it

switches to AUX or USB mode to play the

sound from the auxiliary player.

To cancel SCAN Play, press this button

again.

If there is no auxiliary device, then the

message “No Media” will become dis-

played on the LCD for 3 seconds and

returns to previous mode.

RDM

5

6.

Button (RANDOM)

INFO

8.

Button

Press this button for less than 0.8 sec-

onds to activate ‘RDM’ mode and more

than 0.8 seconds to activate ‘A.RDM’

mode.

Displays the information of the file current-

ly played in the order of FILE NAME,

TITLE, ARTIST, ALBUM, FOLDER, TOTAL

FILE, NORMAL DISPLAY (Displays no

information if the file has no song informa-

tion.)

2. TRACK Button

TRACK

• RDM : Only files in a folder are played

back in a random sequence.

• Press the

button for less than

• A.RDM : All files in a USB memory are

played back in the random sequence.

0.8 seconds to play from the beginning

of the current song.

Press the button for less than 0.8 sec-

onds and press it again within 1 sec-

ond to move to and play the previous

song.

4 120

Features of your vehicle

TUNE

ENTER

Button

10.

Knob &

• Turn this knob clockwise to browse

songs after current song, or counter

clockwise to browse songs before cur-

rent song. To play the displayed song,

press the knob.

• Pressing this knob without turning

enters to AUDIO CONTROL mode.

TA_H800_GEN_AUDIO

FOLDER

9.

Button

FOLDER

• Press

button to move to child

folder of the current folder and display

the first song in the folder.

TUNE ENTER

knob to move

Press

/

to the folder displayed. It will play the

first song in the folder.

• Press

button to move to par-

FOLDER

ent folder display the first song in the

folder.

TUNE ENTER

knob to move

Press

to the folder displayed.

/

4 121

Features of your vehicle

(Continued)

✽

NOTICE FOR USING THE

iPod DEVICE

CAUTION IN USING THE

iPod DEVICE

• When the iPod cable is connected,

the system can be switched to AUX

mode even without iPod device

and may cause noise. Disconnect

the iPod cable when you are not

using the iPod device.

• Some iPod models might not sup-

port the communication protocol

and the files will not be played.

Supported iPod models:

• The Kia iPod Power Cable is

needed in order to operate iPod

with the audio buttons on the

audio system.The USB cable pro-

vided by Apple may cause mal-

function and should not be used

for Kia vehicles.

- iPod Mini

- iPod 4th(Photo) ~ 6th(Classic)

generation

• When not using iPod with car

audio, detach the iPod cable from

iPod. Otherwise, iPod may remain

in accessory mode, and may not

work properly.

- iPod Nano 1st~4th generation

- iPod Touch 1st~2nd generation

• The order of search or playback of

songs in the iPod can be different

from the order searched in the

audio system.

• If the iPod disabled due to its own

malfunction, reset the iPod. (Reset:

Refer to iPod manual)

• An iPod may not operate normally

on low battery.

• Some iPod devices, such as the

iPhone, can be connected through

the Bluetooth^®Wireless Technology

interface. The device must have

❋ The Kia iPod Power Cable may

be purchased through your Kia

Dealership.

• When connecting iPod with the

iPod Power Cable, insert the con-

nector to the multimedia socket

completely. If not inserted com-

pletely, communications between

iPod and audio may be interrupted.

Detachable USB/AUX

All-in-one USB/AUX

• When adjusting the sound effects of

the iPod and the audio system, the

sound effects of both devices will

overlap and might reduce or distort

the quality of the sound.

❋

Provided or sold separately

(USB/ AUX detachable cable only)

• When connecting the iPod, use the

USB/AUX terminals.

audio

Bluetooth^®

Wireless

• Deactivate (turn off) the equalizer

function of an iPod when adjust-

ing the audio system’s volume,

and turn off the equalizer of the

audio system when using the

equalizer of an iPod.

• When disconnecting the iPod, dis-

connect both the USB/AUX terminal.

Technology capability (such as for

stereo headphone Bluetooth^®

Wireless Technology). The device

can play, but it will not be con-

trolled by the audio system.

• The iPod exclusive cable must be

connected to both the USB/AUX

terminals for iPod charging and

operations to be supported.

(Continued)

4 122

Features of your vehicle

RPT

2

Repeats the song currently played.

5.

Button (REPEAT)

2. TRACK Button

TRACK

• Press the

button for less than

0.8 seconds to play from the beginning

of the song currently played.

RDM

5

6.

Button (RANDOM)

• Press this button for less than 0.8 sec-

onds to shuffle order of all songs in

current category. (Song Random)

Press the button for less than 0.8 sec-

onds and press it again within 1 sec-

ond to move to and play the previous

track.

• Press this button for 0.8 seconds or

longer to shuffle order of albums in cur-

rent category. (Album Random)

• Press the button for less than

0.8 seconds to move to the next track.

SEEK

TA_H800_GEN_AUDIO

Using iPod

• To cancel RANDOM Play, press this

button again.

FF

1

Press the

3.

Button (FAST FORWARD)

FF

❋ iPod is a trademark of Apple Inc.

button for 0.8 seconds

1

or longer to initiate forward direction high

speed sound search of current song.

AUX

1.

Button (iPod)

If iPod is connected, it switches to the

iPod mode from the previous mode to

play the song files stored in the iPod.

REW

4

4.

Button (REWIND)

REW

Press

button for 0.8 seconds or

4

If there is no iPod connected, then it dis-

plays the message "No Media" for 3 sec-

onds and returns to the previous mode.

longer to initiate reverse direction high

speed sound search of current song.

4 123

Features of your vehicle

TA_H800_GEN_AUDIO

MENU

3

7.

Button (MENU)

TUNE

ENTER

Button

9.

Knob &

When you rotate the knob clockwise, it

will display the songs (category) ahead

of the song currently played (category in

the same level).

Moves to the upper category from cur-

rently played category of the iPod.

To move to (play) the category (song)

TUNE

displayed, press

knob.

You will be able to search through the

lower category of the selected category.

The order of iPod’s category is Playlist,

Artist, Albums, Genres, Songs, Composers.

Also, when you rotate the knob counter-

clockwise, it will display the songs (cate-

gory) before the song currently played

(category in the same level).

To listen to the song displayed in the

song category, press the button to skip to

and play the selected song.

INFO

6

8.

Button

Displays the information of the file cur-

rently played in the order of TITLE

ARTIST ALBUM NORMAL DISPLAY

,

(Displays no information if the file has no

song information.)

4 124

Features of your vehicle

■ CD Player : AM110TAG (GENERAL)

❋There will be no

logo if the Bluetooth^®Wireless Technology feature is not supported.

TA_GEN_RADIO

4 125

Features of your vehicle

POWER

VOLUME

Knob

3.

Button &

Turns on/off the set when the IGNITION

SWITCH is on ACC or ON. If the button

is turned to the right, it increases the vol-

ume and left,decreases the volume.

5. PRESET Buttons

Push

1

~

6

buttons less than

0.8 seconds to play the channel saved in

each button. Push Preset button for 0.8

seconds or longer to save current chan-

nel to the respective button with a beep.

• Adjusts the volume of the car audio

system. Rotate clockwise to increase

the volume or counterclockwise to

decrease.

SEEK

4.

Button

SEEK

TRACK

TA_GEN_RAIDO

• When the

button is pressed, it

Using RADIO, SETUP, VOLUME

and AUDIO CONTROL

increases the band frequency to auto-

matically select channel. Stops at the

previous frequency if no channel is

found.

FM

1.

Button

SEEK

TRACK

• When the

button is pressed, it

Turns to FM mode and toggles FM1and

FM2 when the button is pressed each

time.

reduces the band frequency to auto-

matically select channel. Stops at the

previous frequency if no channel is

found.

TA_GEN_RADIO

AM

Pressing the

2.

Button

AM

button selects the

SCAN

6.

Button

AM band. AM Mode is displayed on the

LCD.

• When the button is pressed, it auto-

matically scans the radio stations

upwards.

• The SCAN feature steps through each

station, starting from the initial station,

for 5 seconds.

4 126

Features of your vehicle

If no action is taken for 5 seconds after

pressing the button, it will return to the

play mode. (After entering SETUP mode,

move between items using the left, right

SCAN

• Press the

button again to stop

the scan feature and to listen to the

currently selected channel.

TUNE

and PUSH functions of the

knob.)

The setup changes in the order of

AST

7.

Button(AUTO STORE)

When the button is pressed, it automati-

cally selects and saves channels with

high reception rate to PRESET buttons

Scroll ➟ SDVC ➟ Media ➟ Clock ➟

Phone ➟ P.Bass ➟ Scroll...

1

~

6

and plays the channel

saved in PRESET1. If no channel is

saved after AST, it will play the previous

channel.

• Scroll

This function is used to display charac-

ters longer than the LCD text display and

can be turned On/Off through the sound

quality control knob.

TA_GEN_RADIO

DISP

8.

Button

Turn ON/OFF the displayed data and

light on LCD.

When LCD Display is turned OFF, Press

ant button to turn ON display.

SETUP

9.

Button

Press this button to turn to the SETUP

adjustment mode.

• SDVC (Speed Dependent Volume Control)

This function automatically adjusts the

volume level according to the speed of

the vehicle and can be turned On/Off

through the sound quality control knob.

4 127

Features of your vehicle

• Media

• PHONE (if equipped)

Select this item to enter Bluetooth^®

Wireless Technology setup mode. Refer to

“Bluetooth^®Wireless Technology PHONE

OPERATION” section for detailed information.

Select default display of MP3 play infor-

mation. “Folder/File” or “Artist/Title” can

be selected.

TA_GEN_RADIO

AUDIO

ENTER

Button

10.

Knob &

• Clock

Turn this control while listening to a radio

channel to manually adjust frequency.

CLOCK

Select button to enter Colck set-

ting. Adjust the hour and press the

❈ “PHONE” menu is not available if the

audio does not support Bluetooth^®

Wireless Technology features.

Turn clockwise to increase frequency and

counterclockwise to reduce frequency.

ENTER

button to set. Adjust the minute

ENTER

and press the button to complete

and exit from clock adjustment mode.

Pressing the button changes the BASS,

MIDDLE, TREBLE, FADER and BAL-

ANCE TUNE mode. The mode selected

is shown on the display. After selecting

each mode, rotate the Audio control knob

clockwise or counterclockwise.

• P.Bass (Power Bass)

Based on psychoacoustic technology, this

technology overcomes Bass limitations

which may occur due to the limited num-

ber and size of speakers to offer dynamic

BASS sound quality. It is possible to adjust

in 3 levels of LOW/MID/HIGH.

SETUP

Pressing the

button for 0.8 sec-

onds while in power off, screen will allow

the user to make immediately adjust-

ments to the clock.

BASS Control

Off ➟ Low ➟ Mid ➟ High

To increase the BASS, rotate the knob

clockwise, while to decrease the BASS,

rotate the knob counterclockwise.

❈ AM mode is not supported.

4 128

Features of your vehicle

MIDDLE Control

To increase the MIDDLE, rotate the knob

SEEK

TRACK

• Press

button for less than

0.8 seconds to play the next song.

clockwise, while to decrease the MID-

DLE, rotate the knob counterclockwise.

SEEK

TRACK

• Press

button for 0.8 seconds

or longer to initiate forward direction high

speed sound search of current song.

TREBLE Control

To increase the TREBLE, rotate the knob

1

3.

Button (RANDOM)

clockwise, while to decrease the TRE-

BLE, rotate the knob counterclockwise.

Press this button for less than 0.8 sec-

onds to activate ‘RDM’ mode and more

than 0.8 seconds to activate ‘ALL RDM’

mode.

FADER Control

TA_GEN_CD

Turn the control knob clockwise to

emphasize rear speaker sound(front

speaker sound will be attenuated).

• RDM : Only files/tracks in a folder/disc

are played back in a random sequence.

Using CD Player

• ALL RDM (MP3/WMA Only) : All files in

a disc are played back in the random

sequence.

When the control knob is turned counter-

clockwise, front speaker sound will be

emphasized(rear speaker sound will be

attenuated).

CD

If the CD is loaded. turns to CD mode.

1.

Button (CD)

2

4.

Button (REPEAT)

TRACK

2.

Button

Press this button for less than 0.8 sec-

onds to activate 'RPT' mode and more

than 0.8 seconds to activate 'FLD.RPT'

mode.

SEEK

TRACK

BALANCE Control

Rotate the knob clockwise to emphasize

• Press

button for less than

0.8 seconds to play from the beginning

right speaker sound(left speaker sound

will be attenuated).

of current song.

SEEK

• RPT : Only a track (file) is repeatedly

played back.

• Press

button for less than

0.8 seconds and press again within

TRACK

When the control knob is turned counter

clockwise, left speaker sound will be

emphasized(right speaker sound will be

attenuated).

• FLD.RPT (MP3/WMA Only) : Only files

in a folder are repeatedly played back.

1 second to play the previous song.

SEEK

• Press

button for 0.8 seconds

TRACK

or longer to initiate reverse direction

high speed sound search of current

song.

4 129

Features of your vehicle

5. CD Indicator icon

TUNE

ENTER

Button

10.

Knob &

When car ignition switch is ACC or ON

and if the CD is loaded, this indicator

icon is on. If the CD is ejected the icon is

off.

• Turn this knob clockwise to browse

songs after current song, or counter-

clockwise to browse songs before cur-

rent song. To play the displayed song,

press the knob.

• Pressing this knob without turning

enters to AUDIO CONTROL mode.

6.

Button (CD Eject)

FOLDER

11.

Button

Push

button for less than 0.8 sec-

• Press

button to move to child

FOLDER

onds to eject the CD during CD playback.

This button is enabled when ignition switch

is off.

TA_GEN_CD

folder of the current folder and display

the first song in the folder.

SCAN

8.

Button

Play each song in the CD for 10 seconds.To

cancel SCAN Play, press this button again.

Press TUNE knob to move to the fold-

er displayed. It will play the first song in

the folder.

7. CD Slot

Insert a CD label side up and gently push

in while ignition switch is on ACC or ON.

The audio automatically switches to CD

mode and begins to play the CD.

INFO

9.

Button

• Press

button to move to par-

FOLDER

Displays the information of the current

song.

• Audio CD : Disc Title/Artist, Track Title

/Artist, Total Track.

ent folder of the current folder and dis-

play the first song in the folder.

If the audio was turned off, audio power

will automatically turned on as the CD is

inserted.

Press TUNE knob to move to the fold-

er displayed.

• MP3 CD : File Name, Title, Artist,

Album, Folder, Total Files (Not dis-

played if the information is unavailable

on the CD or file.)

• This audio only recognizes 12cm-size, CD-

DA (Audio CD) or ISO data-CD (MP3 CD).

• If UDF data-CD or non-CD (e.g. DVD) is

inserted, "Reading Error" message will

be displayed and the disc will be ejected.

CAUTION

Do not insert a CD if CD indicator is lit.

4 130

Features of your vehicle

2. Folder playing order :

❋ If no song file is contained in the

folder, that folder is not displayed.

NOTE:

Order of playing files (folders) :

1. Song playing order : to sequen-

tially.

4 131

Features of your vehicle

(Continued)

• An encrypted MP3 PLAYER is not

recognizable.

(Continued)

CAUTION IN USING

USB DEVICE

• To use an external USB device,

make sure the device is not con-

nected when starting up the vehi-

cle. Connect the device after

starting up.

• If you disconnect the external USB

device during playback in USB

mode, the external USB device can

be damaged or may malfunction.

Therefore, disconnect the external

USB device when the audio is

turned off or in another mode. (e.g,

Radio or CD)

• Depending on the condition of

the external USB device, the con-

nected external USB device can

be unrecognizable.

• When the formatted byte/sector

setting of External USB device is

not either 512BYTE or 2048BYTE,

then the device will not be recog-

nized.

• If you start the engine when the

USB device is connected, it may

damage the USB device. (USB

flashdrives are very sensitive to

electric shock.)

• Depending on the type and capacity

of the external USB device or the

type of the files stored in the device,

there is a difference in the time

taken for recognition of the device.

• Use only a USB device formatted

to FAT 12/16/32.

• If the engine is started up or

turned off while the external USB

device is connected, the external

USB device may not work.

• Do not use the USB device for pur-

poses other than playing music files.

• USB devices without USB I/F

authentication may not be recog-

nizable.

• Playing videos through the USB is

not supported.

• It may not play inauthentic MP3 or

WMA files.

• Make sure the USB connection

terminal does not come in contact

with the human body or other

objects.

• Use of USB accessories such as

rechargers or heaters using USB

I/F may lower performance or

cause trouble.

1) It can only play MP3 files with

the compression rate between

8Kbps~320Kbps.

• If you repeatedly connect or dis-

connect the USB device in a short

period of time, it may break the

device.

2) It can only play WMA music

files with the compression rate

between 8Kbps~320Kbps.

• If you use devices such as a USB

hub purchased separately, the

vehicle’s audio system may not

recognize the USB device. In that

case, connect the USB device

directly to the multimedia termi-

nal of the vehicle.

• Take precautions for static electrici-

ty when connecting or disconnect-

ing the external USB device.

• You may hear a strange noise

when connecting or disconnect-

ing a USB device.

(Continued)

4 132

Features of your vehicle

(Continued)

• If the USB device is divided by

logical drives, only the music files

on the highest-priority drive are

recognized by car audio.

• The data in the USB memory may

be lost while using this audio.

Always back up important data on

a personal storage device.

• Devices such as MP3 Player/

Cellular phone/Digital camera can

be unrecognizable by standard

USB I/F can be unrecognizable.

• Please avoid using USB memory

products which can be used as

key chains or cellular phone

accessories as they could cause

damage to the USB jack. Please

make certain only to use plug type

connector products as shown

below.

• Charging through the USB may

not be supported in some mobile

devices.

❋ A car exclusive cable (Provided or

sold separately : USB / AUX detach-

able cable only) is required to use

the iPod.

• Some non-standard USB devices

(METAL COVER TYPE USB) can be

unrecognizable.

• Some USB flash memory readers

(such as CF, SD, microSD, etc.) or

external-HDD type devices can be

unrecognizable.

• Music files protected by DRM

(DIGITAL RIGHTS MANAGEMENT)

are not recognizable.

(Continued)

4 133

Features of your vehicle

2

2. TRACK Button

SEEK

4.

Button (REPEAT)

• Press the

button for less

• Press this button for less than 0.8 sec-

onds to repeat current song.

TRACK

than 0.8 seconds to play from the

beginning of the current song.

• Press this button for 0.8 seconds or longer

to repeat all songs in current folder.

Press the button for less than 0.8 sec

onds and press it again within 1 second

to move to and play the previous song.

• To cancel REPEAT, press this button

again.

Press the button for 0.8 seconds or

longer to play the song in reverse

direction in fast speed.

SEEK

TRACK

• Press the

button for less

TA_GEN_USB

than 0.8 seconds to move to the next

song. Press the button for 0.8 seconds

or longer to play the song in forward

direction in fast speed.

Using USB device

AUX

1.

Button (USB)

If USB is connected, it switches to the

USB mode from the other mode to play

the song files stored in the USB.

1

3.

Button (RANDOM)

• Press this button for less than 0.8 seconds

to play songs randomly in current folder.

If no auxiliary device is not connected,

displays “No Media” for 3 seconds and

return to the previous mode.

• Press this button for 0.8 seconds or

longer to play songs randomly in entire

USB device.

• To cancel RANDOM play, press this

button again.

4 134

Features of your vehicle

FOLDER

8.

Button

• Press

button to move to child

FOLDER

folder of the current folder and display

the first song in the folder.

Press TUNE knob to move to the fold-

er displayed. It will play the first song in

the folder.

• Press

button to move to par-

FOLDER

ent folder display the first song in the

folder. Press TUNE knob to move to

the folder displayed.

TA_GEN_USB

SCAN

TUNE

ENTER

Knob & Button

5.

Button

7.

Plays each song in the USB device for 10

seconds. To cancel SCAN Play, press

this button again.

• Turn this knob clockwise to browse

songs after current song, or counter

clockwise to browse songs before cur-

rent song. To play the displayed song,

press the knob.

INFO

6.

Button

• Pressing this knob without turning

enters to AUDIO CONTROL mode.

Displays the information of the file cur-

rently played in the order of FILE NAME,

TITLE, ARTIST, ALBUM, FOLDER,

TOTAL FILE, NORMAL DISPLAY

(Displays no information if the file has no

song information.)

4 135

Features of your vehicle

(Continued)

✽

NOTICE FOR USING THE

iPod DEVICE

CAUTION IN USING THE

iPod DEVICE

• When the iPod cable is connected,

the system can be switched to AUX

mode even without iPod device

and may cause noise. Disconnect

the iPod cable when you are not

using the iPod device.

• Some iPod models might not sup-

port the communication protocol

and the files will not be played.

Supported iPod models:

• The Kia iPod Power Cable is

needed in order to operate iPod

with the audio buttons on the

audio system.The USB cable pro-

vided by Apple may cause mal-

function and should not be used

for Kia vehicles.

- iPod Mini

- iPod 4th(Photo) ~ 6th(Classic)

generation

• When not using iPod with car

audio, detach the iPod cable from

iPod. Otherwise, iPod may remain

in accessory mode, and may not

work properly.

- iPod Nano 1st~4th generation

- iPod Touch 1st~2nd generation

• The order of search or playback of

songs in the iPod can be different

from the order searched in the

audio system.

• If the iPod disabled due to its own

malfunction, reset the iPod. (Reset:

Refer to iPod manual)

❋ The Kia iPod Power Cable may

be purchased through your Kia

Dealership.

• When connecting iPod with the

iPod Power Cable, insert the con-

nector to the multimedia socket

completely. If not inserted com-

pletely, communications between

iPod and audio may be interrupted.

Detachable USB/AUX

All-in-one USB/AUX

• An iPod may not operate normally

on low battery.

• When adjusting the sound effects of

the iPod and the audio system, the

sound effects of both devices will

overlap and might reduce or distort

the quality of the sound.

• Some iPod devices, such as the iPhone,

can be connected through the

Bluetooth^®Wireless Technology inter-

face. The device must have audio

Bluetooth^®Wireless Technology capa-

bility (such as for stereo headphone

Bluetooth^®Wireless Technology). The

device can play, but it will not be con-

trolled by the audio system.

• When connecting the iPod, use the

USB/AUX terminals.

• When disconnecting the iPod,

disconnect both the USB/AUX ter-

minal.

• Deactivate (turn off) the equalizer

function of an iPod when adjust-

ing the audio system’s volume,

and turn off the equalizer of the

audio system when using the

equalizer of an iPod.

• The iPod exclusive cable must be

connected to both the USB/AUX

terminals for iPod charging and

operations to be supported.

(Continued)

4 136

Features of your vehicle

1

2. TRACK Button

SEEK

3.

Button (RANDOM)

• Press this button for less than 0.8 sec-

onds to shuffle order of all songs in

current category. (Song Random)

• Press the

button for less

TRACK

than 0.8 seconds to play from the

beginning of the song currently played.

• Press this button for 0.8 seconds or

longer to shuffle order of albums in cur-

rent category. (Album Random)

Press the button for less than 0.8 sec-

onds and press it again within 1 sec-

ond to move to and play the previous

track.

• To cancel RANDOM Play, press this

button again.

Press the button for 0.8 seconds or

longer to play the song in reverse

direction in fast speed.

2

4.

Button (REPEAT)

TA_GEN_iPod

SEEK

TRACK

• Press the

button for less

Repeats the song currently played.

Using iPod

than 0.8 seconds to move to the next

track.

❋ iPod is a trademark of Apple Inc.

Press the button for 0.8 seconds or

longer to play the song in forward direc-

tion in fast speed.

AUX

1.

Button (iPod)

If iPod is connected. it switches to iPod

mode to play the song files stored in

iPod. If no auxiliary device is not con-

nencted, it displays “No Media” for 3 sec-

onds and returns to the previous mode.

4 137

Features of your vehicle

6

7.

Button (MENU)

Moves to the upper category from cur-

rently played category of the iPod.

To move to (play) the category (song)

displayed, press TUNE knob.

You will be able to search through the

lower category of the selected category.

The standard order of iPod’s category is

Playlist, Artist, Albums, Genes, Songs,

Compsers.

TA_GEN_iPod

TUNE

ENTER

Button

8.

Knob &

TA_GEN_iPod

When you rotate the knob clockwise, it

will display the songs (category) ahead

of the song currently played (category in

the same level).

SCAN

5.

Button

Plays each song in the USB device for 10

seconds.

Also, when you rotate the knob counter-

clockwise, it will display the songs (cate-

gory) before the song currently played

(category in the same level).

To cancel SCAN Play, press this button

again.

To listen to the song displayed in the

song category, press the button to skip to

and play the selected song.

INFO

6.

Button

Displays the information of the file cur-

rently played in the order of

Pressing the button changes the BASS,

MIDDLE, TREBLE, FADER and BAL-

ANCE TUNE mode. The mode selected

is shown on the display. After selecting

each mode, rotate the Audio control knob

clockwise or counterclockwise.

TITLE, ARTIST, ALBUM, NORMAL DIS-

PLAY (Displays no information if the file

has no song information.)

4 138

Features of your vehicle

(continued)

CAUTION IN USING

BLUETOOTH^®WIRELESS

TECHNOLOGY CELLULAR

PHONE

• If the cellular phone signal is poor

or the vehicles interior noise is

too loud, it may be difficult to hear

the other person’s voice during a

call.

• Do not use a cellular phone or

perform Bluetooth^®Wireless

Technology settings (e.g. pairing

a phone) while driving.

• Do not place the phone near or

inside metallic objects, otherwise

communications with Bluetooth^®

Wireless Technology system or

cellular service stations can be

disturbed.

• Some

Bluetooth^®

Wireless

Technology-enabled phones may

not be recognized by the system

or fully compatible with the sys-

tem.

• While

a

phone is connected

through Bluetooth^®Wireless

Technology your phone may dis-

charge quicker than usual for

additional Bluetooth^®Wireless

Technology-related operations.

• Before using Bluetooth^®Wireless

Technology related features of

the audio system, refer your

phone’s User’s Manual for phone-

side

Technology operations.

Bluetooth^®

Wireless

• Some cellular phones or other

devices may cause interference

noise or malfunction to audio

system. In this case, store the

device in a different location may

resolve the situation.

•

The phone must be paired to the

audio system to use Bluetooth^®

Wireless Technology related fea-

tures.

• You will not be able to use the

hands-free feature when your

phone (in the car) is outside of

the cellular service area (e.g. in a

tunnel, in a underground, in a

mountainous area, etc.).

• Please save your phone name in

English, or your phone name may

not be displayed correctly.

(Continued)

4 139

Features of your vehicle

BLUETOOTH^®WIRELESS

TECHNOLOGY PHONE OPERATION

(if equipped)

■

General Features

Phone Setup

• This audio system supports Bluetooth^®

Wireless Technology hands-free and

stereo-headset features.

All Bluetooth^®Wireless Technology-relat-

ed operations can be performed in

PHONE menu.

- HANDS-FREE feature: Making or

receiving calls wirelessly.

1) Push the SETUP button to enter

SETUP mode.

TUNE

knob to move the

cursor between items and push the

- STEREO-HEADSET feature: Playing

music from cellular phones (that sup-

ports A2DP feature) wirelessly.

2) Rotate the

ENTER

button to select "Phone".

✽

NOTICE

• The phone must be paired to the sys-

tem before using Bluetooth^®Wireless

Technology features.

• Only one selected (connected) cellular

phone can be used with the system at

a time.

• Some phones are not fully compatible

with this system.

1.

2.

button : Places and transfers calls.

button : Ends calls or cancels func-

3) Rotate the knob to move the

cursor between items and push the

TUNE

tions.

ENTER

VOLUME

er volume.

button to select a desired item..

3.

button : Raises or lowers speak-

• The Bluetooth^®Wireless Technology

word mark and logos are registered

trademarks owned by Bluetooth^®

Wireless Technology SIG, Inc. and any

use of such marks by Kia is under

MUTE

4.

:Mute the microphone during a call.

®

What is Bluetooth Wireless

Technology?

■

Bluetooth^®Wireless Technology is a wire-

less technology that allows multiple

devices to be connected in a short

range, low-powered devices like hands-

free, stereo headset, wireless remote

control, etc. For more information, visit the

Bluetooth^®Wireless Technology website at

www.Bluetooth.com

license.

A

Bluetooth^®Wireless

Technology enabled cell phone is

required to use Bluetooth^®Wireless

Technology wireless technology.

4 140

Features of your vehicle

• Pairing a phone

3. Select desired phone name from the list

shown.

NOTE:

Before using Bluetooth^®Wireless

Technology features, the phone must be

paired (registered) with the audio sys-

tem. Up to 5 phones can be paired with

the system.

• If the phone is paired with two or

more vehicles of the same model,

some phones may not handle

Bluetooth^®Wireless Technology

devices of that name correctly. In

this case, you may need to change

the name displayed on your phone.

For example, if the vehicles' name is

Kia PICANTO, you may need to change

the name displayed on you phone from

Kia_PICANTO to JOHNS_PICANTO or

Kia PICANTO1 to avoid ambiguity.

• Deleting a Phone

The paired phone can be deleted.

- When the phone is deleted, all the infor-

mation associated with that phone is

also deleted (including phonebook).

NOTE:

• The pairing procedure of the phone

varies according to each phone

model. Before attempting to pair

phone, please see your phone’s

User’s Guide for instructions.

• Once pairing with the phone is com-

pleted, there is no need to pair with

that phone again unless the phone

is deleted manually from the audio

system (refer “Deleting a Phone”

section) or the vehicle’s information

is removed from the phone.

- If you want to use the deleted phone

with the audio system again, pairing

procedure must be completed once

more.

SETUP

1. Press

mode.

button to enter SETUP

Refer to your phone User’s Guide,

or contact your cellular carrier or

phone manufacturer for instruc-

tions.

2. Select “PHONE”, then “DELETE” in

PHONE menu.

3. Select desired phone name from the list

shown.

• Connecting a phone

the

When

Bluetooth^®

Wireless

• Changing Priority

SETUP

1. Press

mode.

button to enter SETUP

Technology system is enabled, the phone

previously used is automatically selected

and re-connected. If you want to select

different phone previously paired, the

phone can be selected through “Select

Phone” menu.

If several phones are paired with the

audio system, the system attempts to

connect following order when the

Bluetooth^®Wireless Technology system

is enabled:

2. Select “PHONE”, then “PAIR” in

PHONE menu.

3. The audio displays “searching

----

passkey: 0000”

1) “Priority” checked phone.

2) Previously connected phone

3) Gives up auto connection.

4. Search the Bluetooth^®Wireless

Technology system on your phone

.Your phone should display your [vehi-

cle model name] on the Bluetooth^®

Wireless Technology device list. Then

attempt pairing on your phone.

Only a selected phone can be used with

the hands-free system at a time.

SETUP

1. Press

mode.

button to enter SETUP

SETUP

1. Press

mode.

button to enter SETUP

2. Select “PHONE”, then “SELECT” in

PHONE menu.

4 141

Features of your vehicle

2. Select “PHONE”, then “PRIORITY” in

PHONE menu.

■

Receiving a Phone Call

Making a Phone Call

A Call Back can be made by pressing

button on the steering wheel.

When receiving a phone call, a ringtone

is audible from speakers and the audio

system changes into telephone mode.

3. Select desired phone name from the

list shown.

- This is the same function as using the

button solely on the cellular phone.

When receiving a phone call, “Incoming”

message and incoming phone number

• Adjusting Bluetooth^®Wireless

Technology Volume

Bluetooth^®Wireless Technology system

volume can be adjusted separately from

main volume of the audio system.

NOTE:

(if available) are displayed on the audio.

• To Answer a Call:

Some phone models require pressing

button twice to make a call.

- Press

• To Reject a Call:

button on the steering wheel.

SETUP

1.Press

mode.

button to enter SETUP

✽

NOTICE

- Press

• To Adjust Ring Volume:

button on the steering wheel.

In the following situations, you or the

other party may have difficulty hearing

each other:

2. Select “PHONE”, then “BT VOL” in

PHONE menu.

3. Adjust volume to desired level by turn-

ing the TUNE knob, then press the

knob to confirm.

- Use VOLUME buttons on the steering

wheel.

1. Speaking at the same time, your voice

may not reach each other parties. (This

is not a malfunction.) Speak alternate-

ly with the other party on the phone.

2. Keep the Bluetooth^®Wireless

Technology volume to a low level.

High-level volume may result in dis-

tortion and echo.

3. When driving on a rough road.

4. When driving at high speeds.

5. When the window is open.

6. When the air conditioning vents are

facing the microphone.

• To Transfer a Call to the Phone(Private

Call):

• Turning Bluetooth^®Wireless

Technology ON/OFF

Bluetooth^®Wireless Technology system

can be enabled (ON) or disabled (OFF)

by this menu.

- If Bluetooth^®Wireless Technology is

disabled, all the commands related to

Bluetooth^®Wireless Technology sys-

tem prompts whether you wish to turn

Bluetooth^®Wireless Technology ON or

not.

- Press and hold

steering wheel until the audio system

transfers a call to the phone.

button on the

■

Talking on the Phone

When talking on the phone, “Active Calls”

message and the other party’s phone

number (if available) are displayed on the

audio.

• To Mute the Microphone (if equipped)

7. When the sound of the air condition-

ing fan is loud.

MUTE

- Press

• To Finish a Call

- Press button on the steering wheel.

button on the audio.

SETUP

1. Press

mode.

button to enter SETUP

2. Select “PHONE”, then “BT OFF” in

PHONE menu.

4 142

Features of your vehicle

®

■

NOTE:

Using the head unit as Bluetooth

Wireless Technology music

• Not only MP3 files, all the sounds

that the phone supports can be

heard by the audio system.

• The Bluetooth^®Wireless Technology

cellular phones shall feature A2DP

and AVRCP functions.

• Some A2DP and AVRCP Bluetooth^®

Wireless Technology cellular phones

may not play music through the head

unit on first try. Please try the below;

This audio system supports A2DP (Audio

Advanced Distribution Profile) and

AVRCP(Audio Video Remote Control

Profile).

Both profiles are available for listening to

the MP3 music via Bluetooth^®Wireless

Technology cellular phone supporting

above Bluetooth^®Wireless Technology

profiles.

To play MP3 music from the Bluetooth^®

Wireless Technology cellular phone,

i.e : Menu➟Filemanager➟Music➟

Option➟Play via Bluetooth

AUX

press the

Play” is displayed on the LCD.

button until “MP3

• Please refer to User's Guide of your

phone for more.

Then try playing music by phone.

To stop music, try stop playing

music from the phone then change

the audio mode to other than “MP3

Play” mode (e.g. FM, AM, CD, etc.)

When playing music from the Bluetooth^®

Wireless Technology cellular phone, the

head unit displays MP3 MODE.

4 143

Features of your vehicle

■ CD Player : AM110TAE(EUROPE)

❋There will be no

logo if the Bluetooth^®feature is not supported.

TA_EU_AUDIO

4 144

Features of your vehicle

6. PRESET Buttons

TA

3.

Button

• Press

1

~

6

buttons less

TA(Traffic announcement) Channels in

FM, CD, AUX mode, turns on/off the

reception of TA channels of RDS.

than 0.8 seconds to play the station

saved in each button.

• Press

1

~

6

buttons more

than 0.8 seconds or longer to save the

current station to the respective button

with a beep.

4.

Button &

Knob

• Turns the audio system on/off when

the ignition switch is on ACC or ON.

• If the knob is turned clockwise/counter-

clockwise, the volume will increase

/decrease.

TA_EU_AUDIO

• Depending on the model if the ignition

switch is not on ACC or ON position.

the “Battery Discharge” warning appears

on LCD after 10 seconds of power-up,

and automatically turns off after 1 hours

of operation.

Using RADIO, SETUP, VOLUME

and AUDIO CONTROL

FM

1.

Button

FM

The

button toggles FM. Listed

below are the paths as the system

switches FM1 to FMA and back to FM1.

• FM/AM: FM1➟FM2➟FMA➟FM1...

SEEK

5.

Button

SEEK

TRACK

• When the

is pressed, it will

automatically tune to the next lower

AM

2.

Button

station.

SEEK

TRACK

AM

The

button toggles AM. Listed

• When the

is pressed, it will

below are the paths as the system

switches AM1 to AMA and back to AM1.

• AM: AM1➟AM2➟AMA➟AM1...

automatically tune to the next higher

station.

4 145

Features of your vehicle

PTY

FOLDER

• Moves

button when search-

ing PTY in RDS Broadcasting Program

Type selection.

DARK

10.

Button

Turn the LCD Display & Backlight

DARK

ON/OFF when

button press.

TA_EU_AUDIO

SETUP

11.

Button

SCAN

AST

Button)

Press this button to enter SETUP mode,

If no action is taken for 8 seconds, it will

return to previous mode.

7.

Button

8.

Button(AUTO STORE

• When the button is pressed, it auto-

matically scans the radio stations

upwards.

When the button is pressed, it automati-

cally selects and saves channels with

high reception rate to PRESET buttons

[1]~[6] and plays the channel saved in

PRESET1. If no channel is saved after

AST, it will play the previous channel.

• The SCAN feature steps through each

station, starting from the initial station,

for 5 seconds.

SCAN

• Press the

button again to stop

the scan feature and to listen to the

currently selected channel.

• Saves only to the Preset memory

(1)~(6) of FMA or AMA mode in some

models.

In “SETUP” mode, rotate the TUNE knob

to move the cursor between items, and

push the TUNE knob to select.

PTY

9.

• Moves

Button

PTY

Button when search-

FOLDER

ing PTY in RDS Broadcasting Program

Type selection.

4 146

Features of your vehicle

• MAIN

Select this ithem to enter the Scroll and

SDVC setup.

• MEDIA

Select default display of MP3 play infor-

mation. “Folder/File” or “Artist/Title” can

be selected.

• AF(AF MENU indication is possible with

• SCROLL

Select whether long file names are scrolled

continuously (On) or just once (Off).

RDS MENU)

Select this item to turn the AF(Alternate

Frequency) feature ON or OFF.

• RDS(if available)

RDS menuancludes News/AF/Region/TA

Vol menu sequentially.

• TA VOL(TA VOL MENU indication is

possible with RDS MENU)

• SDVC (Speed Dependent Volume Control)

• NEWS(NEWS MENU indication is pos

sible with RDS MENU)

Select this item to turn the SDVC feature

On or Off. If it is turned ON, volume level

is adjusted automatically according to

the vehicle speed.

Adjusts the TA (Traffic Announcement) vol-

ume level according to normal audio vol-

ume level.

Turns the automatic NEWS reception fea-

ture ON or OFF.

4 147

Features of your vehicle

• REGION(REGION MENU indication is

possible with RDS MENU)

• Auto

Select “Auto” button to enter Automatic

RDS Time menu.

• P.BASS (PowerBass)

This function creates virtual sound

effects and allows adjustments to the

Bass level.

Selects whether REGION code is used

(ON) or not (OFF) once the radio deter-

mines the AF jump condition. If AUTO is

selected, AF jump condition is deter-

mined automatically via PI reception sta-

tus.

Off ➟ Low ➟ Mid ➟ High ➟ Off...

• Time

Select “Time” button to enter Time setting.

ENTER

Adjust the hour and press the

button to set. Adjust the minute and press

the button to complete and exit

ENTER

from clock adjustment mode.

SETUP

Pressing the

button for 0.8 sec-

onds while in power off, screen will allow

the user to make immediately adjust-

ments to the clock.

❈ AM Mode is not supported.

• CLOCK

Select this item to enter Clock setup

mode.(12/24Hr., Auto, Time)

• PHONE (if equipped)

Select this item to enter PHONE setup mode.

Refer to “BLUETOOTH PHONE OPERA-

TION” section for detailed information.

• 12/24 Hr.

Select “12/24 Hr.” button to enter Time

Format menu.

❈ “PHONE” menu is not available if the

audio does not support Bluetooth fea-

tures.

4 148

Features of your vehicle

• MIDDLE Control

To increase the MIDDLE, rotate the knob

clockwise, while to decrease the MID-

DLE, rotate the knob counterclockwise.

• TREBLE Control

To increase the TREBLE, rotate the knob

clockwise, while to decrease the TRE-

BLE, rotate the knob counterclockwise.

• FADER Control

Turn the control knob clockwise to empha-

size rear speaker sound (front speaker

sound will be attenuated). When the con-

trol knob is turned counterclockwise, front

speaker sound will be emphasized (rear

speaker sound will be attenuated).

TA_EU_AUDIO

12.

&

Knob

Rotate the knob clockwise or counter-

clock wise to increase or decrease from

current frequency.

Pressing the button changes the BASS,

MIDDLE, TREBLE, FADER and BAL-

ANCE TUNE mode. The mode selected

is shown on the display. After selecting

each mode, rotate the Audio control knob

clockwise or counterclockwise.

• BALANCE Control

Rotate the knob clockwise to emphasize

right speaker sound (left speaker sound

will be attenuated). When the control

knob is turned counter clockwise, left

speaker sound will be emphasized (right

speaker sound will be attenuated).

• BASS Control

To increase the BASS, rotate the knob

clockwise, while to decrease the BASS,

rotate the knob counterclockwise.

4 149

Features of your vehicle

• FLD RPT (MP3/WMA Only) : Only files

in a folder are repeatedly played back.

SEEK

TRACK

• Press

button for 0.8 seconds

or longer to initiate reverse direction

high speed sound search of current

song.

SEEK

• Press

button for less than

0.8 seconds to play the next song.

TRACK

SEEK

TRACK

5.

Push

Button (CD Eject)

button for less than 0.8 sec-

• Press

button for 0.8 seconds

or longer to initiate forward direction

high speed sound search of current

song.

onds to eject the CD during CD playback.

This button is enabled when ignition switch

is off.

TA_EU_CD

1

3.

Button (RANDOM)

6. CD Slot

Using CD Player

MEDIA

Press this button for less than 0.8 sec-

onds to activate ‘RDM’ mode and more

than 0.8 seconds to activate ‘ALL RDM’

mode.

Insert a CD label side up and gently push

in while ignition switch is on ACC or ON.

The audio automatically switches to CD

mode and begins to play the CD.

1.

Button (CD)

If the CD is loaded, turns to CD mode.

If no CD, it displays “No Media” for 3 sec-

onds and returns to the previous mode.

• RDM : Only files/tracks in a folder/disc

are played back in a random sequence.

If the audio was turned off, audio power

will automatically turned on as the CD is

inserted.

• ALL RDM (MP3/WMA Only) : All files in

a disc are played back in the random

sequence.

TRACK

• This audio only recognizes 12cm-size, CD-

DA (Audio CD) or ISO data-CD (MP3 CD).

2.

Button

SEEK

TRACK

• Press

button for less than

0.8 seconds to play from the beginning

• If UDF data-CD or non-CD (e.g. DVD) is

inserted, "Reading Error" message will

be displayed and the disc will be ejected.

2

4.

Button (REPEAT)

of current song.

SEEK

Press this button for less than 0.8 sec-

onds to activate 'RPT' mode and more

than 0.8 seconds to activate 'FLD RPT'

mode.

• Press

button for less than

TRACK

0.8 seconds and press again within

1 second to play the previous song.

CAUTION

Do not insert a CD if CD indicator is

lit.

• RPT : Only a track (file) is repeatedly

played back.

4 150

Features of your vehicle

NOTE:

Order of playing files (folders) :

ENTER

Button

9.

knob

&

• Turn this knob clockwise to browse

songs after current song, or counter-

clockwise to browse songs before cur-

rent song. To play the displayed song,

press the knob.

1. Song playing order : to sequen-

tially.

• Pressing this knob without turning

enters to AUDIO CONTROL mode.

FOLDER

10.

Button

PTY

FOLDER

• Press

button to move to

TA_EU_CD

child folder of the current folder and

display the first song in the folder.

SCAN

7.

Button

Play each song in the CD for 10 seconds.To

cancel SCAN Play, press this button again.

Press

knob to move to the fold-

er displayed. It will play the first song in

the folder.

PTY

FOLDER

INFO

8.

Button

• Press

button to move to

Displays the information of the current

song.

• Audio CD : Disc Title/Artist, Track Title

/Artist, Total Track.

parent folder of the current folder and

display the first song in the folder.

Press

er displayed.

knob to move to the fold-

• MP3 CD : File Name, Title, Artist,

Album, Folder, Total Files (Not dis-

played if the information is unavailable

on the CD or file.)

4 151

Features of your vehicle

2. Folder playing order :

❋ If no song file is contained in the

folder, that folder is not displayed.

4 152

Features of your vehicle

(Continued)

• An encrypted MP3 PLAYER is not

recognizable.

(Continued)

CAUTION IN USING

USB DEVICE

• To use an external USB device,

make sure the device is not con-

nected when starting up the vehi-

cle. Connect the device after

starting up.

• If you disconnect the external USB

device during playback in USB

mode, the external USB device can

be damaged or may malfunction.

Therefore, disconnect the external

USB device when the audio is

turned off or in another mode. (e.g,

Radio or CD)

• Depending on the condition of

the external USB device, the con-

nected external USB device can

be unrecognizable.

• When the formatted byte/sector

setting of External USB device is

not either 512BYTE or 2048BYTE,

then the device will not be recog-

nized.

• If you start the engine when the

USB device is connected, it may

damage the USB device. (USB

flashdrives are very sensitive to

electric shock.)

• Depending on the type and capacity

of the external USB device or the

type of the files stored in the device,

there is a difference in the time

taken for recognition of the device.

• Use only a USB device formatted

to FAT 12/16/32.

• If the engine is started up or

turned off while the external USB

device is connected, the external

USB device may not work.

• Do not use the USB device for pur-

poses other than playing music files.

• USB devices without USB I/F

authentication may not be recog-

nizable.

• Playing videos through the USB is

not supported.

• It may not play inauthentic MP3 or

WMA files.

• Make sure the USB connection

terminal does not come in contact

with the human body or other

objects.

• Use of USB accessories such as

rechargers or heaters using USB

I/F may lower performance or

cause trouble.

1) It can only play MP3 files with

the compression rate between

8Kbps~320Kbps.

• If you repeatedly connect or dis-

connect the USB device in a short

period of time, it may break the

device.

2) It can only play WMA music

files with the compression rate

between 8Kbps~320Kbps.

• If you use devices such as a USB

hub purchased separately, the

vehicle’s audio system may not

recognize the USB device. In that

case, connect the USB device

directly to the multimedia termi-

nal of the vehicle.

• Take precautions for static electrici-

ty when connecting or disconnect-

ing the external USB device.

• You may hear a strange noise

when connecting or disconnect-

ing a USB device.

(Continued)

4 153

Features of your vehicle

(Continued)

• If the USB device is divided by

logical drives, only the music files

on the highest-priority drive are

recognized by car audio.

• Please avoid using USB memory

products which can be used as

key chains or cellular phone

accessories as they could cause

damage to the USB jack. Please

make certain only to use plug type

connector products as shown

below.

• Devices such as MP3 Player/

Cellular phone/Digital camera can

be unrecognizable by standard

USB I/F can be unrecognizable.

• Charging through the USB may

not be supported in some mobile

devices.

❋ A car exclusive cable is required

to use the iPod.

• Some non-standard USB devices

(METAL COVER TYPE USB) can be

unrecognizable.

• Some USB flash memory readers

(such as CF, SD, microSD, etc.) or

external-HDD type devices can be

unrecognizable.

• Music files protected by DRM

(DIGITAL RIGHTS MANAGEMENT)

are not recognizable.

• The data in the USB memory may

be lost while using this audio.

Always back up important data on

a personal storage device.

(Continued)

4 154

Features of your vehicle

1

2. TRACK Button

SEEK

3.

Button (RANDOM)

• Press this button for less than 0.8 seconds

to play songs randomly in current folder.

• Press the

button for less

TRACK

than 0.8 seconds to play from the

beginning of the current song.

• Press this button for 0.8 seconds or

longer to play songs randomly in entire

USB device.

Press the button for less than 0.8 sec

onds and press it again within 1 sec-

ond to move to and play the previous

song.

• To cancel RANDOM play, press this

button again.

Press the button for 0.8 seconds or

longer to play the song in reverse

direction in fast speed.

2

4.

Button (REPEAT)

• Press this button for less than 0.8 sec-

onds to repeat current song.

TA_EU_USB

SEEK

• Press the

button for less

TRACK

Using USB device

than 0.8 seconds to move to the next

song. Press the button for 0.8 seconds

or longer to play the song in forward

direction in fast speed.

• Press this button for 0.8 seconds or longer

to repeat all songs in current folder.

MEDIA

1.

Button (USB or AUX)

• To cancel REPEAT, press this button

again.

If the auxiliary device is connected, it

switches to AUX or USB mode to play the

sound from the auxiliary player.

If there is no auxiliary device, then the

message “No Media” will become dis-

played on the LCD for 3 seconds and

returns to previous mode.

4 155

Features of your vehicle

FOLDER

8.

Button

PTY

FOLDER

• Press

button to move to

child folder of the current folder and

display the first song in the folder.

Press knob to move to the fold-

er displayed. It will play the first song in

the folder.

PTY

FOLDER

• Press

button to move to par-

ent folder display the first song in the

folder. Press

the folder displayed.

knob to move to

TA_EU_USB

SCAN

5.

Button

ENTER

7.

knob

&

Button

Plays each song in the USB device for 10

seconds. To cancel SCAN Play, press

this button again.

• Turn this knob clockwise to browse

songs after current song, or counter

clockwise to browse songs before cur-

rent song. To play the displayed song,

press the knob.

INFO

6.

Button

Displays the information of the file cur-

rently played in the order of

• Pressing this knob without turning

enters to AUDIO CONTROL mode.

FILE NAME, TITLE, ARTIST, ALBUM,

FOLDER, TOTAL FILE, NORMAL DIS-

PLAY (Displays no information if the file

has no song information.)

4 156

Features of your vehicle

(Continued)

✽

NOTICE FOR USING THE

iPod DEVICE

CAUTION IN USING THE

iPod DEVICE

• When the iPod cable is connected,

the system can be switched to AUX

mode even without iPod device

and may cause noise. Disconnect

the iPod cable when you are not

using the iPod device.

• Some iPod models might not sup-

port the communication protocol

and the files will not be played.

Supported iPod models:

• The Kia iPod Power Cable is

needed in order to operate iPod

with the audio buttons on the

audio system.The USB cable pro-

vided by Apple may cause mal-

function and should not be used

for Kia vehicles.

- iPod Mini

- iPod 4th(Photo) ~ 6th(Classic)

generation

• When not using iPod with car

audio, detach the iPod cable from

iPod. Otherwise, iPod may remain

in accessory mode, and may not

work properly.

- iPod Nano 1st~4th generation

- iPod Touch 1st~2nd generation

• The order of search or playback of

songs in the iPod can be different

from the order searched in the

audio system.

• If the iPod disabled due to its own

malfunction, reset the iPod. (Reset:

Refer to iPod manual)

❋ The Kia iPod Power Cable may

be purchased through your Kia

Dealership.

• When connecting iPod with the

iPod Power Cable, insert the con-

nector to the multimedia socket

completely. If not inserted com-

pletely, communications between

iPod and audio may be interrupted.

Detachable USB/AUX

All-in-one USB/AUX

• An iPod may not operate normally

on low battery.

• When adjusting the sound effects of

the iPod and the audio system, the

sound effects of both devices will

overlap and might reduce or distort

the quality of the sound.

• Some iPod devices, such as the

iPhone, can be connected through the

Bluetooth^®interface. The device

must have audio Bluetooth^®capabili-

ty (such as for stereo headphone

Bluetooth^®). The device can play, but

it will not be controlled by the audio

system.

• When connecting the iPod, use the

USB/AUX terminals.

• When disconnecting the iPod,

disconnect both the USB/AUX ter-

minal.

• Deactivate (turn off) the equalizer

function of an iPod when adjust-

ing the audio system’s volume,

and turn off the equalizer of the

audio system when using the

equalizer of an iPod.

• The iPod exclusive cable must be

connected to both the USB/AUX

terminals for iPod charging and

operations to be supported.

(Continued)

4 157

Features of your vehicle

1

2. TRACK Button

SEEK

3.

Button (RANDOM)

• Press this button for less than 0.8 sec-

onds to shuffle order of all songs in

current category. (Song Random)

• Press the

button for less

TRACK

than 0.8 seconds to play from the

beginning of the song currently played.

• Press this button for 0.8 seconds or

longer to shuffle order of albums in cur-

rent category. (Album Random)

Press the button for less than 0.8 sec-

onds and press it again within 1 sec-

ond to move to and play the previous

track.

• To cancel RANDOM Play, press this

button again.

Press the button for 0.8 seconds or

longer to play the song in reverse

direction in fast speed.

2

4.

Button (REPEAT)

TA_EU_iPod

SEEK

TRACK

• Press the

button for less

Repeats the song currently played.

Using iPod

than 0.8 seconds to move to the next

track.

❋ iPod is a trademark of Apple Inc.

Press the button for 0.8 seconds or

longer to play the song in forward direc-

tion in fast speed.

MEDIA

1.

Button (iPod)

If iPod is connected, it switches to the

iPod mode from the previous mode to

play the song files stored in the iPod.

If there is no iPod connected, then it dis-

plays the message "No Media" for 3 sec-

onds and returns to the previous mode.

4 158

Features of your vehicle

6

7.

Button (MENU)

Moves to the upper category from cur-

rently played category of the iPod.

To move to (play) the category (song)

displayed, press

knob.

You will be able to search through the

lower category of the selected category.

The standard order of iPod’s category is

Playlist, Artist, Albums, Genes, Songs,

Composers.

TA_EU_iPod

SCAN

5.

Button

ENTER

Button

8.

knob

&

Plays each song in the USB device for 10

seconds.

When you rotate the knob clockwise, it

will display the songs (category) ahead

of the song currently played (category in

the same level).

To cancel SCAN Play, press this button

again.

Also, when you rotate the knob counter-

clockwise, it will display the songs (cate-

gory) before the song currently played

(category in the same level).

INFO

6.

Button

Displays the information of the file cur-

rently played in the order of

To listen to the song displayed in the

song category, press the button to skip to

and play the selected song.

TITLE, ARTIST, ALBUM, NORMAL DIS-

PLAY (Displays no information if the file

has no song information.)

Pressing the button changes the BASS,

MIDDLE, TREBLE, FADER and BAL-

ANCE TUNE mode. The mode selected

is shown on the display. After selecting

each mode, rotate the Audio control knob

clockwise or counterclockwise.

4 159

Features of your vehicle

(continued)

• Do not place the phone near or

inside metallic objects, otherwise

communications with Bluetooth^®

system or cellular service sta-

tions can be disturbed.

CAUTION IN USING

BLUETOOTH^®CELLULAR

PHONE

• Do not use a cellular phone or

perform Bluetooth^®settings (e.g.

pairing a phone) while driving.

• Some Bluetooth^®-enabled phones

may not be recognized by the

system or fully compatible with

the system.

• Before using Bluetooth^®related

features of the audio system,

refer your phone’s User’s Manual

for phone-side Bluetooth^®opera-

tions.

• While

a

phone is connected

through Bluetooth^®your phone

may discharge quicker than usual

for additional Bluetooth^®-related

operations.

• Some cellular phones or other

devices may cause interference

noise or malfunction to audio

system. In this case, store the

device in a different location may

resolve the situation.

•

The phone must be paired to the

audio system to use Bluetooth^®

related features.

• Please save your phone name in

English, or your phone name may

not be displayed correctly.

• You will not be able to use the

hands-free feature when your

phone (in the car) is outside of

the cellular service area (e.g. in a

tunnel, in a underground, in a

mountainous area, etc.).

• If the cellular phone signal is poor

or the vehicles interior noise is

too loud, it may be difficult to hear

the other person’s voice during a

call.

(Continued)

4 160

Features of your vehicle

®

BLUETOOTH PHONE OPERATION

(if equipped)

■

General Features

• This audio system supports Bluetooth^®

hands-free and stereo-headset features.

✽

NOTICE

• The phone must be paired to the sys-

tem before using Bluetooth^®features.

• Only one selected (linked) cellular phone

can be used with the system at a time.

• Some phones are not fully compatible

with this system.

• The Bluetooth^®word mark and logos

are registered trademarks owned by

Bluetooth^®SIG, Inc. and any use of

such marks by Kia is under license.

A Bluetooth enabled cell phone is

required to use Bluetooth^®wireless

technology.

- HANDS-FREE feature: Making or

receiving calls wirelessly through

voice recognition.

- STEREO-HEADSET feature: Playing

music from cellular phones (that sup-

ports A2DP feature) wirelessly.

• Voice recognition engine of the

Bluetooth^®system supports 10 types of

languages:

FRENCH

GERMAN

UK ENGLISH

SPANISH

DUTCH

1.

2.

button : Places and transfers calls.

button : Ends calls or cancels func-

ITALIAN

DANISH

tions.

3.

4.

button : Activates voice recognition.

button : Raises or lowers speak-

RUSSIAN

POLISH

SWEDISH

VOLUME

er volume.

®

■

What is Bluetooth ?

Bluetooth^®is a wireless technology that

allows multiple devices to be connected

in a short range, low-powered devices

like hands-free, stereo headset, steering

remote control, etc. For more informa-

®

tion, visit the Bluetooth website at

www.Bluetooth.com

4 161

Features of your vehicle

®

Bluetooth Language Setting

The system language can be changed by

the following steps:

• At any time if you say “help”, the system

will announce what commands are

available.

■

Voice Recognition Activation

■

• The voice recognition engine contained

in the Bluetooth^®System can be acti-

vated in the following conditions:

- Button Activation

1. Power on the audio system with the

volume set to an audible level.

■

Menu tree

The menu tree identifies available voice

recognition Bluetooth^®functions.

The voice recognition system will be

active when the button is pressed

and after the sound of a Beep.

2. Press and hold

button on the

steering wheel until the audio displays

“Please Wait”.

- The Bluetooth^®system will reply in

currently selected language that it is

changing to the next language.

- Active Listening

Pair phone

Setup

The voice recognition system will be

active for a period of time when the

Voice Recognition system has asked

for a customer response.

Select phone

Delete phone

Change priority

Bluetooth off

- System language cycles between

FRENCH/GERMAN/UK ENGLISH

SPANISH/DUTCH/ITALIAN/DANISH

/

RUSSIAN/POLISH/SWEDISH.

3. When completed, the audio display

returns to normal.

• The system can recognize single digits

from zero to nine while number greater

than ten will not be recognized.

4. Repeat steps 2 and 3 for the next lan-

guage selection.

Phonebook

Add entry

By voice

• If the command is not recognized, the

system will announce "Pardon" or No

input voice signal from microphone. (No

response)

By Phone

Change

NOTE:

Delete name

The phone needs to be paired again

after changing system language.

- Avoid resting your thumb or finger

on the button as the language

could unintentionally change.

• The system shall cancel voice recogni-

tion mode in following cases : When

Call

By name

pressing the

button and saying

cancel following the beep. When not

making a call and pressing the

button. When voice recognition has

failed 3 consecutive times.

By number

4 162

Features of your vehicle

2) Select “PHONE” item by rotating the

TUNE knob, then push the knob.

■

Voice Operation Tip

To get the best performance out of the

Voice Recognition System, observe the

followings:

- Keep the interior of the vehicle as quiet

as possible. Close the window to elim-

inate surrounding noise (traffic noise,

vibration sounds, etc), which may dis-

turb recognizing the voice command

correctly.

The Bluetooth^®icon appears on the

upper side of audio display when a

phone is connected.

3) Select desired item by rotating the

TUNE knob, then push the knob.

- Speak a command after a beep sound

within 5 seconds. Otherwise the com-

mand will not be received properly.

■

Phone Setup

All Bluetooth^®-related operations can be

performed by voice command or by man-

ual operation.

- Speak in a natural voice without paus-

ing between words.

■

Information Display

- By Voice Command:

• Pairing phone

Press button on the steering wheel

to activate voice recognition.

Before using Bluetooth^®features, the

phone must be paired (registered) to the

audio system. Up to 5 phones can be

paired with the system.

NOTE:

The pairing procedure of the phone

varies according to each phone

model. Before attempting to pair

phone, please see your phone’s

User’s Guide for instructions.

- By Manual Operation:

1) Push the “SETUP” button to enter

SETUP mode

4 163

Features of your vehicle

9. Search the Bluetooth^®system on your

phone .Your phone should display your

[vehicle model name] on the

Bluetooth^®device list. Then attempt

pairing on your phone

NOTE:

Once pairing with the phone is com-

pleted, there is no need to pair with

that phone again unless the phone is

deleted manually from the audio sys-

tem (refer “Deleting Phone” section)

or the vehicle’s information is

removed from the phone.

If the phone is paired to two or more

vehicles of the same model, i.e. both

vehicles are Kia PICANTO, some

phones may not handle Bluetooth^®

10. After Pairing is completed, your

phone will start to transfer phone/con-

tact list to the audio system.

devices of that name correctly. In this

case, you may need to change the

name displayed on your phone from

PICANTO to PICANTO1 and PICAN-

TO2.

- This process may take from a few

minutes to over 10 minutes depend-

ing on the phone model and number

of entries in the phone/contact list.

1. Press

2. Say “Set Up”.

button.

Refer to your phone’s User’s Guide, or

contact your cellular carrier or phone

manufacturer for instructions.

- The system replies with available

commands.

- To skip the information message,

press

heard.

11. By manual operation:

- Select “PAIR” in PHONE menu, then

proceed from step 5.

again and then a beep is

3. Say “Pair Phone”

4. Proceed at next step.

5. Say the name of your phone when

prompted.

- Use any name to uniquely describe

your phone.

- Use Full name to voice tag.

NOTE:

• Until the audio displays “Transfer

Complete”, Bluetooth^®hands-free

feature may not be fully operational.

- Not use to short name or similar to

voice command.

6. Bluetooth^®system will repeat the

name you stated.

• Depending on the phone make and

model, the phone book contact list

mat not transfer to the audio system.

7. Say “Yes” to confirm.

8. The audio displays “searching

----

passkey: 0000” and asks you to initiate

pairing procedure from the phone.

4 164

Features of your vehicle

• Connecting phone

• Deleting Phone

The paired phone can be deleted.

• Changing Priority

When the Bluetooth^®system is enabled,

the phone previously used is automati-

cally selected and re-connected. If you

want to select different phone previously

paired, the phone can be selected

through “Select Phone” menu.

When several phones are paired to the

audio system, the system attempts to

connect following order when the

Bluetooth^®is enabled:

- When the phone is deleted, all the infor-

mation associated with that phone is

also deleted (including phonebook).

1) “Priority” checked phone.

2) Previously connected phone

3) Gives up auto connection.

- If you want to use the deleted phone

with the audio system again, pairing

procedure must be completed once

more.

Only a selected phone can be used with

the hands-free system at a time.

1. Press

2. Say “Set Up”.

button.

1. Press

2. Say “Set Up”.

button.

1.Press

2.Say “Set Up”.

button.

3. Say “Change Priority” after prompt.

- The system lists all the registered

phone names.

3. Say “Select Phone” after prompt

- The system lists all the registered

phone names.

3.Say “Delete Phone” after prompt.

- The system lists all the registered

phone names.

4. Say the name or number of desired

phone from the list.

4. Say the name or number of desired

phone from the list.

4.Say the name or number of desired

phone from the list.

5. Say “Yes” to confirm.

6. By manual operation:

5. Say “Yes” to confirm.

6. By manual operation:

5.Say “Yes” to confirm.

6.By manual operation:

- Select “PRIORITY” in PHONE menu,

then select desired phone from the list.

- Select “SELECT” in PHONE menu,

then select desired phone from the list.

- Select “DELETE” in PHONE menu,

then select desired phone from the list.

4 165

Features of your vehicle

• Turning Bluetooth^®ON/OFF

Bluetooth^®system can be enabled (ON)

or disabled (OFF) by this menu.

- If Bluetooth^®is disabled, all the com-

mands related to Bluetooth^®system

prompts whether you wish to turn

Bluetooth^®ON or not.

•

2. Adjusting Bluetooth language

■

Phone Book (In-Vehicle)

• Adding Entry

Select “BT Voice Recognition lan-

guage” in PHONE menu, adjust lan-

guage to desired language by turning

the TUNE knob, then press the knob

again to confirm.

Phone numbers and voice tags can be

registered. Entries registered in the

phone can also be transferred.

- Supported Languages:

• Adding Entry by Voice

FRENCH/GERMAN/UK ENGLISH

SPANISH/DUTCH/ITALIAN/DANISH/RU

SSIAN/POLISH/SWEDISH.

1. Press

2. Say “Set Up”

button.

1. Press

2. Say "Phonebook".

button.

3. Say “Bluetooth Off” after prompt.

4. Say “Yes” to confirm.

5. By manual operation:

- The system replies with all available

commands.

- To skip the information message,

press

heard.

again and then a beep is

- Select “BT Off” in PHONE menu,

then after announcement, say “YES”

to confirm.

3. Say “Add Entry”.

4. Say “By Voice” to proceed.

5. Say the name of the entry when

prompted.

6. Say “Yes” to confirm.

7. Say the phone number of that entry

when prompted.

8. Say “Store” if phone number input is

finished.

NOTE:

The Phone need to be paired again

after changing system language.

9. Say a phone number type. “Home”,

“Work”, “Mobile”, “Other” or “Default” is

available.

• Avoid resting your thumb or finger

on the talk button as the language

could unintentionally change.

10. Say “Yes” to complete adding entry.

11. Say “Yes” to store additional location

for this contact, or say “Cancel” to fin-

ish the process.

4 166

Features of your vehicle

• Adding Entry by Phone

1. Press button.

2. Say “Phonebook”.

• Deleting Name

The registered names can be deleted.

1.Press button.

✽

NOTICE

- The system can recognize single digits

from zero to nine. Numbers that are

ten or greater cannot be recognized.

- You can enter each digit individually

or group digits together in preferred

string lengths.

- To speed up input, it is a good idea to

group all digits into a continuous

string.

- Recommend to enter the numbers con-

stituted an grouping within all digit

numbers to dial 995 / 734 / 0000

- The display corresponding to each

operation appears on the screen as fol-

lows:

3. Say “Add Entry” after prompt.

4. Say “By Phone” to proceed.

5. Say “Yes” to confirm.

2.Say “Phonebook”.

3.Say “Delete Name” after prompt.

4.Say the name of the entry (voice tag).

5.Say “Yes” to confirm.

6.Your phone will start to transfer

phone/contact list to the audio system.

This process may take over 10 minutes

depending on the phone model and

number of entries

■

Making a Phone Call

• Calling by Name

A phone call can be made by speaking

names registered in the audio system.

7. Wait till the audio displays “Transfer

Complete” message.

1. Press

2. Say “Call”.

button.

• Changing Name

The registered names can be modified.

Input operation example:

1. Say: “Nine, nine, five”

3. Say “Name” when prompted.

4. Say desired name (voice tag).

➟ Display: “995”

2. And say: “Seven, three, four”

➟ Display: “995734”

1.Press button.

2.Say “Phonebook”.

5. Say desired location (phone number

type). Only stored locations can be

selected.

3.Say “Change Name” after prompt.

4.Say the name of the entry (voice tag).

5.Say “Yes” to confirm.

6. Say “Yes” to confirm and make a call.

6.Say new desired name.

✽ Tip

A shortcut to each of the following func-

tions is available:

1. Say “Call Name”

2. Say “Call <john>”

3. Say “Call <john> at <home>”

4 167

Features of your vehicle

• Dialing by Number

■

Receiving a Phone Call

Talking on the Phone

A phone call can be made by dialing the

spoken numbers. The system can recog-

nize single digits from zero to nine.

When receiving a phone call, a ringtone

is audible from speakers and the audio

system changes into telephone mode.

When talking on the phone, “Active Call”

message and the other party’s phone

number (if available) are displayed on the

audio.

When receiving a phone call, “Incoming

call” message and incoming phone num-

ber (if available) are displayed on the

audio.

1.Press

2.Say “Call”.

button.

• To Finish a Call

- Press

button on the steering wheel.

3.Say “Number” when prompted.

4.Say desired phone numbers.

• To Answer a Call:

✽

NOTICE

5.Say “Dial” to complete the number and

make a call.

- Press button on the steering wheel.

• To Reject a Call:

In the following situations, you or the

other party may have difficulty hearing

each other:

1. Speaking at the same time, your voice

may not reach each other parties. (This

is not a malfunction.) Speak alternate-

ly with the other party on the phone.

2. Keep the Bluetooth^®volume to a low

level. High-level volume may result in

distortion and echo.

- Press button on the steering wheel.

• To Adjust Ring Volume:

✽ Tip

A shortcut to each of the following func-

tions is available:

1. Say “Dial Number”

- Use VOLUME buttons on the steering

wheel.

2. Say “Dial <digit>”

• To Transfer a Call to the Phone (Secret

Call):

- Press

button on the steering

wheel until the audio system transfers a

call to the phone.

3. When driving on a rough road.

4. When driving at high speeds.

5. When the window is open.

6. When the air conditioning vents are

facing the microphone.

7. When the sound of the air condition-

ing fan is loud.

4 168

Features of your vehicle

®

NOTE:

■

Bluetooth Audio Music Streaming

The audio system supports Bluetooth^®

A2DP (Audio Advanced Distribution

Profile) and AVRCP (Audio Video

Remote Control Profile) technologies.

• In addition to streaming MP3 files,

all music and sound files your cellu-

lar phone supports can be played

by the audio system.

• Bluetooth^®compatible

cellular

Both profiles provide steaming of music

via compatible “PAIRED” Bluetooth^®

Cellular phone.

phones must include A2DP and

AVRCP capabilities.

To stream music from the Bluetooth^®cel-

lular phone, play your music files on your

cellular phone according to your cellular

phone user’s manual and press the

MEDIA button on the audio system until

“MP3 play” is displayed on the LCD.

• Some A2DP and AVRCP compatible

Bluetooth^®cellular phones may not

play music through the audio sys-

tem initially. These cellular phones

may need to have the Bluetooth^®

streaming enabled, for example;

i.e : Menu➟Filemanager➟Music➟

Option➟Play via Bluetooth

The audio system head unit displays

‘MP3 MODE’.

• Please refer to User’s Guide for your

cellular phone for more information.

To cancel Bluetooth^®cellular phone

music streaming, stop music play-

back on the cellular phone or

change the audio mode to AM/FM,

CD, iPod, ect.

4 169

Features of your vehicle

■

Key matrix

Class

No.

Connected

Normal mode BT SETUP menu

KEY

Paired H/P

Empty

Disconnected

Not Connecting

2nd Call

Outgoing Call

Incoming Call

Active Call

2nd call

Not Paired

Accept Call

1st Call:waiting 2nd Call:waiting

2nd Call:active 1st Call:active

-

SHORT

1

Transfer call:secret call

-

LONG

VR

Reject Call

End Call

SHORT

MODE Cancel MODE Cancel MODE Cancel MODE Cancel

2

Speaker

Adaptation

Speaker

Adaptation

LONG

-

[10sec]

(Only English)

SHORT

Active

-

3

LONG

Change

language

[10sec]

4 170

Features of your vehicle -> Audio system for Your Kia Picanto 4 Door Second Generation (2011-2017)

Related Topics

Popular Owner Manuals

Latest Owner Manuals