Features of your vehicle
WINDSHIELD DEFROSTING AND DEFOGGING
• For maximum defrosting, set the tem-
perature control to the extreme
right/hot position and the fan speed
control to the highest speed.
WARNING - Windshield
heating
Do not use the
or
position
• If warm air to the floor is desired while
defrosting or defogging, set the mode
to the floor-defrost position.
during cooling operation in
extremely humid weather. The dif-
ference between the temperature of
the outside air and that of the wind-
shield could cause the outer sur-
face of the windshield to fog up,
causing loss of visibility. In this
case, set the mode selection knob
• Before driving, clear all snow and ice
from the windshield, rear window, out-
side rear view mirrors, and all side win-
dows.
• Clear all snow and ice from the hood
and air inlet in the cowl grill to improve
heater and defroster efficiency and to
reduce the probability of fogging up the
inside of the windshield.
OTA040079
Manual climate control system
To defog inside windshield
or button to the
position and
fan speed control knob or button to
the lower speed.
1. Set the fan speed to the desired posi-
tion.
2. Select desired temperature.
3. Select the
or
position.
4. Turn on the air-conditioning system.
5. Select the outside (fresh) air mode.
4 99
English 
