2019-2026 Kia Picanto 4 Door Driving your vehicle -> Automated Manual Transmission (AMT) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving your vehicle -> Automated Manual Transmission (AMT) for Your Kia Picanto 4 Door Third Generation (2019-2026)

Driving your vehicleAutomated Manual Transmission (AMT)Automated Manual Transmis-僅 When D (Drive) is selected, the trans-mission will automatically shiftsion (AMT) (if equipped)through the gears similar to a conven-tional automatic transmission. Unlikea traditional Automatic Transmission,the gear shifting can sometimes befelt and heard as the actuatorsengage the clutches and the gears areselected. When the gear is shifting,you may sometimes hear operatingnoise. This is normal and does notindicate a problem with your trans-mission.僅 The Automated Manual Transmission(AMT) adopts a dry-type single clutch,OJA050120Lwhich is different from the torquePress the shift button, then moveconverter of the Automatic Transmis-shift . It shows better acceleration per-Move shift and increased fuel5The Automated Manual Transmissionefficiency whilst driving but initial(AMT) is a transmission equipped with alaunch might be little bit slower thangear actuator and a clutch actuator inthe Automatic to the conventional Manual僅 As a result, gear shifts are sometimesTransmission. To improve the drivingmore noticeable than a conventionalconvenience, gear shift is automaticallyAutomatic Transmission and a lightperformed by the transmission controlvibration during launching can be feltunit and clutch/gear the transmission speed is matchedwith the engine speed. This is a nor-Automated Manual Transmissionmal condition of the Automated Man-(AMT) operationual Transmission (AMT).The Automated Manual Transmission僅 The dry-type clutch transfers torque(AMT) has five forward speeds and onemore directly and provides a directreverse individual speeds aredrive feeling which may feel differentselected automatically in the D (Drive)from a conventional Automatic with a torque converter. ThisFeatures of the Automated Man-may be more noticeable when launch-ual Transmission (AMT)ing the vehicle from a stop or whentravell
Driving your vehicle
Automated Manual Transmission (AMT)
Automated Manual Transmis-
僅 When D (Drive) is selected, the trans-
mission will automatically shift
sion (AMT) (if equipped)
through the gears similar to a conven-
tional automatic transmission. Unlike
a traditional Automatic Transmission,
the gear shifting can sometimes be
felt and heard as the actuators
engage the clutches and the gears are
selected. When the gear is shifting,
you may sometimes hear operating
noise. This is normal and does not
indicate a problem with your trans-
mission.
僅 The Automated Manual Transmission
(AMT) adopts a dry-type single clutch,
OJA050120L
which is different from the torque
Press the shift button, then move
converter of the Automatic Transmis-
shift lever.
sion. It shows better acceleration per-
Move shift lever.
formance and increased fuel
5
The Automated Manual Transmission
efficiency whilst driving but initial
(AMT) is a transmission equipped with a
launch might be little bit slower than
gear actuator and a clutch actuator in
the Automatic Transmission.
addition to the conventional Manual
僅 As a result, gear shifts are sometimes
Transmission. To improve the driving
more noticeable than a conventional
convenience, gear shift is automatically
Automatic Transmission and a light
performed by the transmission control
vibration during launching can be felt
unit and clutch/gear actuator.
as the transmission speed is matched
with the engine speed. This is a nor-
Automated Manual Transmission
mal condition of the Automated Man-
(AMT) operation
ual Transmission (AMT).
The Automated Manual Transmission
僅 The dry-type clutch transfers torque
(AMT) has five forward speeds and one
more directly and provides a direct
reverse individual speeds are
drive feeling which may feel different
selected automatically in the D (Drive)
from a conventional Automatic Trans-
position.
mission with a torque converter. This
Features of the Automated Man-
may be more noticeable when launch-
ual Transmission (AMT)
ing the vehicle from a stop or when
travelling at low, stop-and-go vehicle
僅 The Automated Manual Transmission
speeds.
(AMT) can be thought of as an auto-
僅 When rapidly accelerating at a low
matically shifting manual transmis-
vehicle speed, the engine rpm may
sion. It gives the driving feel of a
increase highly depending on the
Manual Transmission/Automated
vehicle’s driving condition.
Manual Transmission.
5
21
Driving your vehicleAutomated Manual Transmission (AMT)Automated Manual Transmission僅 For a smooth launch uphill, depressthe accelerator pedal smoothly(AMT) instruction labeldepending on the current and follow the instruction label僅 If you release your foot from theattached on the driver side’s sunvisoraccelerator pedal at low vehiclebefore driving the vehiclespeed, you may feel engine braking,which is similar to Manual Transmis-sion.僅 When you turn the engine on and off,you may hear clicking sounds as thesystem goes through a self-test. Thisis a normal sound for the AutomatedOJAPE063034RManual Transmission (AMT).僅 During the first 1,500 km (1,000miles), you may feel that the vehiclemay not be smooth when acceleratingat low speed. During this break-inperiod, the shift quality and perfor-mance of your new vehicle is continu-ously functionThe Creeping function helps the vehicleto start smoothly. If you take your footoff the brake pedal when the shift leveris either in R (Reverse), D (Drive) or N(Neutral) position, the vehicle will startslowly without depressing the accelera-tor pedal. To disable the function,depress the brake pedal or pull up theparking brake creeping func-tion will not operate when:僅 The parking brake lever is engagedwith the shift lever in R (Reverse), D(Drive) or N (Neutral) position522
Driving your vehicle
Automated Manual Transmission (AMT)
Automated Manual Transmission
僅 For a smooth launch uphill, depress
the accelerator pedal smoothly
(AMT) instruction label
depending on the current conditions.
Read and follow the instruction label
僅 If you release your foot from the
attached on the driver side’s sunvisor
accelerator pedal at low vehicle
before driving the vehicle
speed, you may feel engine braking,
which is similar to Manual Transmis-
sion.
僅 When you turn the engine on and off,
you may hear clicking sounds as the
system goes through a self-test. This
is a normal sound for the Automated
OJAPE063034R
Manual Transmission (AMT).
僅 During the first 1,500 km (1,000
miles), you may feel that the vehicle
may not be smooth when accelerating
at low speed. During this break-in
period, the shift quality and perfor-
mance of your new vehicle is continu-
ously optimized.
NOTICE
Creeping function
The Creeping function helps the vehicle
to start smoothly. If you take your foot
off the brake pedal when the shift lever
is either in R (Reverse), D (Drive) or N
(Neutral) position, the vehicle will start
slowly without depressing the accelera-
tor pedal. To disable the function,
depress the brake pedal or pull up the
parking brake creeping func-
tion will not operate when:
僅 The parking brake lever is engaged
with the shift lever in R (Reverse), D
(Drive) or N (Neutral) position
5
22
Driving your vehicleAutomated Manual Transmission (AMT)Lever shifting conditionLever shiftingShifting conditionWhen shifting condition is dissatisfiedClusterFrom (Cur-To (DesiredTransmis-Vehicle speedBrakerent position)position)Shift indica-Brake presssion positionSoundtorindicatorNN/A----RReversing below 7R or N blink-DAppliedOnOnNkm/h (4 mph)ingMoving forwardRbelow 2 km/h (1AppliedN blinkingOnOnNmph)NReversing below7DAppliedN blinkingOnOnNkm/h (4 mph)Moving forwardD or N blink-Rbelow 2 km/h (1AppliedOnOnNingDmph)NN/A----5The indicator in the instrument clusterWARNINGdisplays the shift lever position when theTo reduce the risk of serious injury orignition switch or ENGINE START/STOPdeath:button is in the ON position.僅 ALWAYS check the surrounding areasWARNINGnear your vehicle for people, espe-cially children, before shifting a vehi-僅 After the vehicle has stopped, alwayscle into D (Drive) or R (Reverse).make sure the shift lever is in N (Neu-tral), apply the parking brake, and僅 Before leaving the driver’s seat,turn the engine make sure the shift lever is inthe N (Neutral) position, then set the僅 Do not use the N (Neutral) position inparking brake, and place the ignitionplace of the parking or ENGINE START/STOP but-ton in the LOCK/OFF position. Unex-pected and sudden vehicle movementcan occur if these precautions are notfollowed.僅 Do not use engine braking (shiftingfrom a high gear to lower gear) rap-idly on slippery vehicle mayslip causing an accident.523
Driving your vehicle
Automated Manual Transmission (AMT)
Lever shifting condition
Lever shifting
Shifting condition
When shifting condition is dissatisfied
Cluster
From (Cur-
To (Desired
Transmis-
Vehicle speed
Brake
rent position)
position)
Shift indica-
Brake press
sion position
Sound
tor
indicator
N
N/A
-
-
-
-
R
Reversing below 7
R or N blink-
D
Applied
On
On
N
km/h (4 mph)
ing
Moving forward
R
below 2 km/h (1
Applied
N blinking
On
On
N
mph)
N
Reversing below7
D
Applied
N blinking
On
On
N
km/h (4 mph)
Moving forward
D or N blink-
R
below 2 km/h (1
Applied
On
On
N
ing
D
mph)
N
N/A
-
-
-
-
5
The indicator in the instrument cluster
WARNING
displays the shift lever position when the
To reduce the risk of serious injury or
ignition switch or ENGINE START/STOP
death:
button is in the ON position.
僅 ALWAYS check the surrounding areas
WARNING
near your vehicle for people, espe-
cially children, before shifting a vehi-
僅 After the vehicle has stopped, always
cle into D (Drive) or R (Reverse).
make sure the shift lever is in N (Neu-
tral), apply the parking brake, and
僅 Before leaving the driver’s seat,
turn the engine off.
always make sure the shift lever is in
the N (Neutral) position, then set the
僅 Do not use the N (Neutral) position in
parking brake, and place the ignition
place of the parking brake.
switch or ENGINE START/STOP but-
ton in the LOCK/OFF position. Unex-
pected and sudden vehicle movement
can occur if these precautions are not
followed.
僅 Do not use engine braking (shifting
from a high gear to lower gear) rap-
idly on slippery vehicle may
slip causing an accident.
5
23
Driving your vehicleAutomated Manual Transmission (AMT)Automated Manual Trans-AMT warning messagemission (AMT) warningindicatorPress BrakeThe engine cannot be started unless theshift lever is N (Neutral) position andbrake pedal is 043040LA: Steep grade! Press brake pedalAutomated Manual Transmission(AMT) warning lampClutch Over HeatedThis warning light indicates that theclutch is overheat. It appears for a whilstwhen the ignition switch or ENGINESTART/STOP button is turned ON. TheOJAPE043041Lindicator light illuminates when theA: Transmission Hot! Park with engineClutch’s estimated temperature rises uponto limited up hills or on steep grades:NOTICE僅 To hold the vehicle on an incline usethe foot brake or the parking AMT warning lamp may come on僅 When in stop-and-go traffic on anwhen clutch slip occurs excessively dueincline, keep some distance aheadto repeated stop-and-go driving onbefore moving the vehicle for-steep grades and when Hill Hold hold the vehicle on themaintained for a long time. In order toincline with the foot warning lamp ON, use the brake僅 If the vehicle is held on a hill by apply-during low speed driving on hill or whening the accelerator pedal or by creep-stopping the vehicle on an Uphill with brake pedal disengaged, theclutch and transmission may overheat僅 If the vehicle is held on a hill by usingwhich can result in damage. At thisonly the accelerator pedal or bytime, a warning message will appearcreeping with brake pedal disen-on the LCD , the clutch may overheat whichcan result in damage. At this time, a僅 If the LCD warning is active, the footwarning lamp will appear on the clus-brake must be .僅 Ignoring the warnings can lead to僅 If the warning lamp is active, the footdamage to the transmissionbrake must be applied.僅 Ignoring the warnings can lead todamage to the clutch and transmis-sion.524
Driving your vehicle
Automated Manual Transmission (AMT)
Automated Manual Trans-
AMT warning message
mission (AMT) warning
indicator
Press Brake
The engine cannot be started unless the
shift lever is N (Neutral) position and
brake pedal is depressed.
OJAPE043040L
A: Steep grade! Press brake pedal
Automated Manual Transmission
(AMT) warning lamp
Clutch Over Heated
This warning light indicates that the
clutch is overheat. It appears for a whilst
when the ignition switch or ENGINE
START/STOP button is turned ON. The
OJAPE043041L
indicator light illuminates when the
A: Transmission Hot! Park with engine
Clutch’s estimated temperature rises up
on
to limited value.
Driving up hills or on steep grades:
NOTICE
僅 To hold the vehicle on an incline use
the foot brake or the parking brake.
The AMT warning lamp may come on
僅 When in stop-and-go traffic on an
when clutch slip occurs excessively due
incline, keep some distance ahead
to repeated stop-and-go driving on
before moving the vehicle for-
steep grades and when Hill Hold is
hold the vehicle on the
maintained for a long time. In order to
incline with the foot brake.
prevent warning lamp ON, use the brake
僅 If the vehicle is held on a hill by apply-
during low speed driving on hill or when
ing the accelerator pedal or by creep-
stopping the vehicle on an Uphill slope.
ing with brake pedal disengaged, the
clutch and transmission may overheat
僅 If the vehicle is held on a hill by using
which can result in damage. At this
only the accelerator pedal or by
time, a warning message will appear
creeping with brake pedal disen-
on the LCD display.
gaged, the clutch may overheat which
can result in damage. At this time, a
僅 If the LCD warning is active, the foot
warning lamp will appear on the clus-
brake must be applied.
ter.
僅 Ignoring the warnings can lead to
僅 If the warning lamp is active, the foot
damage to the transmission
brake must be applied.
僅 Ignoring the warnings can lead to
damage to the clutch and transmis-
sion.
5
24
Driving your vehicleAutomated Manual Transmission (AMT)Transmission (clutch) High tem-WARNINGperatureOn an uphill road, never hold the vehicleat a stop using only the acceleratorpedal or the creeping mode. This maycause clutch overheating and excessivedamage, resulting in the reduction of theclutch’s life 043042LTransmission (clutch) overheatedA: Transmission temp. is high! Stopsafely.僅 Under certain conditions, such asrepeated stop-and-go launches onsteep grades, sudden take off oracceleration, or other harsh drivingconditions, the transmission clutchOJAPE043041Ltemperatures will increase exces-A: Transmission Hot! Park with 僅 When the clutch temperature is high ,5the safe protection mode engagesand the gear position indicator on thecluster blinks with a chime. At thistime, “Transmission temperature ishigh! Stop safely” warning messagewill appear on the LCD display andOJAPE043043Rdriving may not be smooth.A: Cooling... Remain parked for 00僅 After first warning, clutch increased continuously, then warn-ing sound and shift indicator blinkscontinuously.(second warning)僅 If this occurs, pull over to a safe loca-tion, stop the vehicle with the enginerunning, apply the brakes and allowthe clutch to cool for a few minutesOJAPE043044Rwith engine on.A: Trans cooled down. Resume driv-僅 If you ignore this warning, the may become worse. You僅 If the vehicle continues to be drivenmay experience abrupt shifts, jerki-and the clutch temperatures reach theness. To return to the normal drivingmaximum temperature limit, thecondition, Stop the vehicle and apply“Transmission hot! Park with enginethe foot brake. Then allow the trans-On” warning will be to cool for a few minutes with僅 The warning will display a time to waitengine the transmission to cool.525
Driving your vehicle
Automated Manual Transmission (AMT)
Transmission (clutch) High tem-
WARNING
perature
On an uphill road, never hold the vehicle
at a stop using only the accelerator
pedal or the creeping mode. This may
cause clutch overheating and excessive
damage, resulting in the reduction of the
clutch’s life cycle.
OJAPE043042L
Transmission (clutch) overheated
A: Transmission temp. is high! Stop
safely.
僅 Under certain conditions, such as
repeated stop-and-go launches on
steep grades, sudden take off or
acceleration, or other harsh driving
conditions, the transmission clutch
OJAPE043041L
temperatures will increase exces-
A: Transmission Hot! Park with engine
sively.
on
僅 When the clutch temperature is high ,
5
the safe protection mode engages
and the gear position indicator on the
cluster blinks with a chime. At this
time, “Transmission temperature is
high! Stop safely” warning message
will appear on the LCD display and
OJAPE043043R
driving may not be smooth.
A: Cooling... Remain parked for 00
僅 After first warning, clutch temperature
min.
is increased continuously, then warn-
ing sound and shift indicator blinks
continuously.(second warning)
僅 If this occurs, pull over to a safe loca-
tion, stop the vehicle with the engine
running, apply the brakes and allow
the clutch to cool for a few minutes
OJAPE043044R
with engine on.
A: Trans cooled down. Resume driv-
僅 If you ignore this warning, the driving
ing.
condition may become worse. You
僅 If the vehicle continues to be driven
may experience abrupt shifts, jerki-
and the clutch temperatures reach the
ness. To return to the normal driving
maximum temperature limit, the
condition, Stop the vehicle and apply
“Transmission hot! Park with engine
the foot brake. Then allow the trans-
On” warning will be displayed.
mission to cool for a few minutes with
僅 The warning will display a time to wait
engine on.
for the transmission to cool.
5
25
Driving your vehicleAutomated Manual Transmission (AMT)僅 If this occurs, pull over to a safe loca-WARNINGtion, stop the vehicle with the engineDo not shift into gear unless your foot isrunning, apply the brakes and shiftfirmly on the brake pedal. Shifting intothe vehicle to N (Neutral), and allowgear when the engine is running at highthe transmission to can cause the vehicle to move僅 When the message “Transmissionvery rapidly. You could lose control ofcooled down. Resume driving”the vehicle and hit people or you can continue to driveyour vehicle.D (Drive)僅 When possible, drive the vehicleThis is the normal forward driving any of the warning mes-tion. The transmission will automaticallysages in the LCD display continue toshift to the appropriate gear positionblink, for your safety, have the systemupon operation of the accelerator pedalchecked by a professional work-and variation of vehicle recommends to visit anpower when passing another vehicle orauthorised Kia dealer/service uphill, depress the acceleratorTransmission rangesfurther until you feel the transmissiondownshift to a lower gear.R (Reverse)When starting off on an uphillUse this position to drive the vehiclebackward.僅 Engage the parking brake firmly toprevent the vehicle from rolling back-NOTICEwards.僅 Always come to a complete stop僅 Move the shift lever to D (Drive) posi-before shifting into R (Reverse) posi-tion whilst depressing the . Make sure that the shift indica-僅 When moving to R (Reverse) positiontor in the cluster displays 1st gear is not shifted if the vehicle僅 Take your foot of the brake pedal andspeed is over 2 km/h (1 mph).depress the accelerator pedal gradu-僅 Depress the brake pedal fully. If not,ally. Then, when the vehicle startsthe brake press indicator will illumi-moving, release the parking brakenate and the gear is not depress the accelerator starting off on
Driving your vehicle
Automated Manual Transmission (AMT)
僅 If this occurs, pull over to a safe loca-
WARNING
tion, stop the vehicle with the engine
Do not shift into gear unless your foot is
running, apply the brakes and shift
firmly on the brake pedal. Shifting into
the vehicle to N (Neutral), and allow
gear when the engine is running at high
the transmission to cool.
speed can cause the vehicle to move
僅 When the message “Transmission
very rapidly. You could lose control of
cooled down. Resume driving”
the vehicle and hit people or objects.
appears you can continue to drive
your vehicle.
D (Drive)
僅 When possible, drive the vehicle
This is the normal forward driving posi-
any of the warning mes-
tion. The transmission will automatically
sages in the LCD display continue to
shift to the appropriate gear position
blink, for your safety, have the system
upon operation of the accelerator pedal
checked by a professional work-
and variation of vehicle extra
recommends to visit an
power when passing another vehicle or
authorised Kia dealer/service partner.
driving uphill, depress the accelerator
Transmission ranges
further until you feel the transmission
downshift to a lower gear.
R (Reverse)
When starting off on an uphill
Use this position to drive the vehicle
backward.
僅 Engage the parking brake firmly to
prevent the vehicle from rolling back-
NOTICE
wards.
僅 Always come to a complete stop
僅 Move the shift lever to D (Drive) posi-
before shifting into R (Reverse) posi-
tion whilst depressing the brake
tion.
pedal. Make sure that the shift indica-
僅 When moving to R (Reverse) position
tor in the cluster displays 1st gear.
the gear is not shifted if the vehicle
僅 Take your foot of the brake pedal and
speed is over 2 km/h (1 mph).
depress the accelerator pedal gradu-
僅 Depress the brake pedal fully. If not,
ally. Then, when the vehicle starts
the brake press indicator will illumi-
moving, release the parking brake
nate and the gear is not shifted.
and depress the accelerator pedal.
When starting off on a downhill
N (Neutral)
僅 Depress the brake pedal and move
The wheels and transmission are not
the shift lever to D (Drive) position.
N (Neutral) if you need to
Make sure that the shift indicator in
restart a stalled engine, or if it is neces-
the cluster displays 1st gear.
sary to stop with the engine ON. Always
僅 Take your foot off the brake pedal
depress the brake pedal when you are
and slowly depress the accelerator
shifting from N (Neutral) to another
pedal. When the vehicle speed
gear.
increases, the clutch will be engaged.
5
26
Driving your vehicleAutomated Manual Transmission (AMT)NOTICENOTICE僅 If the gear is not shifted after chang-僅 Only the five forward gears can being the shift lever from N (Neutral) toselected. To reverse or park the vehi-D (Drive)/M (Manual)/R (Reverse), trycle, move the shift lever to the Rto shift the gear again. In this case,(Reverse) or N (Neutral) position astime delay and intermittent noise which are normal.僅 Downshifts are made automatically僅 Always come to a complete stop andwhen the vehicle slows down. Whendepress the brake pedal before shift-the vehicle stops, 1st gear is automati-ing into D (Drive) position .cally selected.僅 When moving from R (Reverse) to D僅 When the engine rpm approaches the(Drive) position, the gear is not shiftedred zone the transmission will upshiftif the vehicle speed is over 7 km/h (4automatically.mph).僅 If the driver presses the lever to + (Up)僅 Depress the brake pedal fully. If not,or - (Down) position, the transmissionthe brake press indicator will illumi-may not make the requested gearnate and the gear is not if the next gear is outside ofthe allowable engine rpm range. The5driver must execute upshifts in accor-Manual shift modedance with road conditions, takingcare to keep the engine rpms belowthe red zone.僅 When accelerating from a stop on aslippery road, push the shift lever for-ward into the + (Up) position. Thisallows the transmission to shift intoOJAPE063035Lthe 2nd gear which is better forWhether the vehicle is stationary or insmooth driving on a slippery , Manual shift mode is selected byPush the shift lever to the - (Down)pushing the shift lever from the D (Drive)side to shift back to the 1st into the manual gate (M). Toreturn to D (Drive) range operation, pushParkingthe shift lever back into the main shift mode, moving the shiftTo park your vehicle, always come to alever backwards and forwards will allowcomplete stop and continue to depressyou to
Driving your vehicle
Automated Manual Transmission (AMT)
NOTICE
NOTICE
僅 If the gear is not shifted after chang-
僅 Only the five forward gears can be
ing the shift lever from N (Neutral) to
selected. To reverse or park the vehi-
D (Drive)/M (Manual)/R (Reverse), try
cle, move the shift lever to the R
to shift the gear again. In this case,
(Reverse) or N (Neutral) position as
time delay and intermittent noise may
required.
occur which are normal.
僅 Downshifts are made automatically
僅 Always come to a complete stop and
when the vehicle slows down. When
depress the brake pedal before shift-
the vehicle stops, 1st gear is automati-
ing into D (Drive) position .
cally selected.
僅 When moving from R (Reverse) to D
僅 When the engine rpm approaches the
(Drive) position, the gear is not shifted
red zone the transmission will upshift
if the vehicle speed is over 7 km/h (4
automatically.
mph).
僅 If the driver presses the lever to + (Up)
僅 Depress the brake pedal fully. If not,
or - (Down) position, the transmission
the brake press indicator will illumi-
may not make the requested gear
nate and the gear is not shifted.
change if the next gear is outside of
the allowable engine rpm range. The
5
driver must execute upshifts in accor-
Manual shift mode
dance with road conditions, taking
care to keep the engine rpms below
the red zone.
僅 When accelerating from a stop on a
slippery road, push the shift lever for-
ward into the + (Up) position. This
allows the transmission to shift into
OJAPE063035L
the 2nd gear which is better for
Whether the vehicle is stationary or in
smooth driving on a slippery road.
motion, Manual shift mode is selected by
Push the shift lever to the - (Down)
pushing the shift lever from the D (Drive)
side to shift back to the 1st gear.
position into the manual gate (M). To
return to D (Drive) range operation, push
Parking
the shift lever back into the main
Manual shift mode, moving the shift
To park your vehicle, always come to a
lever backwards and forwards will allow
complete stop and continue to depress
you to select the desired range of gears
the brake pedal.
for the current driving conditions.
僅 When parking on the flat road, move
+ (Up) : Push the lever forward once to
the shift lever from D (Drive)/R
shift up one gear.
(Reverse) to N (Neutral) position.
Then, engage the parking brake
- (Down) : Pull the lever backwards once
firmly before turning off the engine.
to shift down one gear.
僅 When parking on a slope, it is recom-
mended to place the shift lever in D
5
27
Driving your vehicleAutomated Manual Transmission (AMT)(Drive) for uphill and R (Reverse) fortrigger logic for engine power reduc-downhill and to engage the parkingtion to assure vehicle before turning off the acceleration will resume afterthe brake pedal is the engine was turned off with theshift lever in D (Drive) or R (Reverse)僅 When driving in Manual shift mode,position, it is necessary to depress theslow down before shifting to a lowerbrake pedal and move the shift levergear. Otherwise, the lower gear mayto N (Neutral) position to turn on thenot be engaged if the engine rpms areengine. Take the Key with you whenoutside of the allowable the vehicle.僅 Always apply the parking brake whenleaving the vehicle. Do not depend onWARNINGplacing the transmission in N (Neutral)When you stay in the vehicle with theto keep the vehicle from running, be careful not to僅 Exercise extreme caution when driv-depress the accelerator pedal for a longing on a slippery surface. Be espe-period of time. The engine or exhaustcially careful when braking,system may overheat and start aaccelerating or shifting gears. On exhaust gas and the exhaustslippery surface, an abrupt change insystem are very hot. Keep away from thevehicle speed can cause the driveexhaust system not stopwheels to lose traction and may causeor park over flammable materials, suchloss of vehicle control resulting in anas dry grass, paper or leaves. They and cause a fire.僅 Optimum vehicle performance andeconomy is obtained by smoothlyGood driving practicesdepressing and releasing the acceler-僅 Never move the shift lever from Nator.(Neutral) to any other position withWARNINGthe accelerator pedal reduce the risk of SERIOUS INJURY僅 Be sure the vehicle is completelyor DEATH:stopped before you attempt to shiftinto R (Reverse) or D (Drive).僅 ALWAYS wear your seatbelt. In a colli-sion, an unbelted occu
Driving your vehicle
Automated Manual Transmission (AMT)
(Drive) for uphill and R (Reverse) for
trigger logic for engine power reduc-
downhill and to engage the parking
tion to assure vehicle deceleration.
brake before turning off the engine.
Vehicle acceleration will resume after
the brake pedal is released.
If the engine was turned off with the
shift lever in D (Drive) or R (Reverse)
僅 When driving in Manual shift mode,
position, it is necessary to depress the
slow down before shifting to a lower
brake pedal and move the shift lever
gear. Otherwise, the lower gear may
to N (Neutral) position to turn on the
not be engaged if the engine rpms are
engine. Take the Key with you when
outside of the allowable range.
exiting the vehicle.
僅 Always apply the parking brake when
leaving the vehicle. Do not depend on
WARNING
placing the transmission in N (Neutral)
When you stay in the vehicle with the
to keep the vehicle from moving.
engine running, be careful not to
僅 Exercise extreme caution when driv-
depress the accelerator pedal for a long
ing on a slippery surface. Be espe-
period of time. The engine or exhaust
cially careful when braking,
system may overheat and start a
accelerating or shifting gears. On a
exhaust gas and the exhaust
slippery surface, an abrupt change in
system are very hot. Keep away from the
vehicle speed can cause the drive
exhaust system not stop
wheels to lose traction and may cause
or park over flammable materials, such
loss of vehicle control resulting in an
as dry grass, paper or leaves. They may
accident.
ignite and cause a fire.
僅 Optimum vehicle performance and
economy is obtained by smoothly
Good driving practices
depressing and releasing the acceler-
僅 Never move the shift lever from N
ator.
(Neutral) to any other position with
WARNING
the accelerator pedal depressed.
To reduce the risk of SERIOUS INJURY
僅 Be sure the vehicle is completely
or DEATH:
stopped before you attempt to shift
into R (Reverse) or D (Drive).
僅 ALWAYS wear your seatbelt. In a colli-
sion, an unbelted occupant is signifi-
僅 Do not move the shift lever to N (Neu-
cantly more likely to be seriously
tral) when driving. Doing so may
injured or killed than a properly belted
result in an accident because of a loss
occupant.
of engine braking and the transmis-
sion could be damaged.
僅 Avoid high speeds when cornering or
turning.
僅 Do not drive with your foot resting on
the brake pedal. Even light, but con-
僅 Do not make quick steering wheel
sistent pedal pressure can result in
movements, such as sharp lane
the brakes overheating, brake wear
changes or fast, sharp turns.
and possibly even brake failure.
僅 The risk of rollover is greatly
僅 Depressing both accelerator and
increased if you lose control of your
brake pedals at the same time can
vehicle at highway speeds.
5
28

Related Topics

Popular Owner Manuals