2017-2023 Kia Rio 4 Door Maintenance -> Wiper blades User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance -> Wiper blades for Your Kia Rio 4 Door Third Generation (2017-2023)

Maintenance  
WIPER BLADES  
Blade inspection  
Contamination of either the wind-  
shield or the wiper blades with for-  
eign matter can reduce the effective-  
ness of the windshield wipers.  
Common sources of contamination  
are insects, tree sap, and hot wax  
treatments used by some commer-  
cial car washes. If the blades are not  
Blade replacement  
When the wipers no longer clean  
adequately, the blades may be worn  
or cracked, and require replacement.  
To prevent damage to the wiper arms  
or other components, do not attempt  
to move the wipers manually.  
wiping properly, clean both the win- Aftermarket wiper blades may result  
dow and the blades with a good in wiper malfunction and/or failure. It  
cleaner or mild detergent, and rinse is recommended to use certified Kia  
thoroughly with clean water.  
parts.  
1JBA5122  
CAUTION - Wiper blades  
Commercial hot waxes applied by  
automatic car washes have been  
known to make the windshield diffi-  
cult to clean.  
To prevent damage to the wiper  
blades, do not use gasoline,  
kerosene, paint thinner, or other  
solvents on or near them.  
8 33  
Maintenance  
Front windshield wiper blade  
CAUTION - Wiper arms  
Do not allow the wiper arm to  
fall against the windshield,  
since it may chip or crack the  
windshield.  
1JBA7037  
1LDA5023  
Type A  
1. Raise the wiper arm and turn the  
wiper blade assembly to expose  
the plastic locking clip.  
1JBA7038  
2. Compress the clip (1) and slide  
the blade assembly downward (2).  
3. Lift it off the arm.  
4. Install the blade assembly in the  
reverse order of removal.  
8 34  
Maintenance  
Rear window wiper blade  
(for 5 door)  
OHM078060  
OHM078059  
Type B  
1. Raise the wiper arm.  
OHM078062  
1. Raise the wiper arm and pull out  
the wiper blade assembly.  
OHM078061  
2. Lift up the wiper blade clip. Then  
pull down the blade assembly and  
remove it.  
3. Install the new blade assembly in  
the reverse order of removal.  
8 35  
Maintenance  
OHM078063  
2. Install the new blade assembly by  
inserting the center part into the  
slot in the wiper arm until it clicks  
into place.  
3. Make sure the blade assembly is  
installed firmly by trying to pull it  
slightly.  
To prevent damage to the wiper arms  
or other components, have an  
authorized Kia dealer replace the  
wiper blade.  
8 36  

Related Topics

Popular Owner Manuals