Driving your vehicle
4) Make sure the vehicle windshield
Setting the compass zone
✽ NOTICE
wipers are turned off.
1. Do not install a ski rack, antenna,
This compass must be set to com-
5) Drive your vehicle in at least 2
etc. that are attached to the vehi-
pensate for the variation between
1
complete (either clockwise or
cle using a magnet as anything
true north and magnetic north. To set
counter-clockwise) circles at less
attached to the roof of the vehicle
variation:
than 8 km/h (5 mph) until the com-
with a magnet will effect compass
1. Find your current location and
2
pass heading appears. Driving in
operation.
variance zone number on the zone
a circle in right-handed direction
2. If the compass deviates from the
map.
and opposite direction is possible
correct indication soon after
3
2. Press and hold the ON/OFF but-
and if possible, stop the wiper
repeated adjustment, have the
ton for 6~9 seconds. The current
operation.
compass checked at an authorized
zone number will appear in the
4
dealer.
6) If the vehicle's compass headings
display.
3. The compass may not indicate the
become inaccurate again, repeat
3. Release and press the ON/OFF
correct compass point in tunnels
steps 1 through 6 above.
5
button until the new zone number
or while driving up or down a
appears in the display. After you
steep hill.
✽ NOTICE
stop pressing the button in, the
(The compass returns to the cor-
6
display will show a compass direc-
If new vehicle is first driven or if the
rect compass point when the vehi-
tion within a few seconds.
battery has been disconnected, do
cle moves to an area where the
7
the calibration procedure as above.
geomagnetism is stabilized.)
8
9
4 55
English 
