Driving your vehicle
• For maximum defrosting, set the
Defogging logic
temperature control to the extreme
Manual climate control system
right/hot position and the fan speed
To reduce the probability of fogging
1
control to the highest speed.
up the inside of the windshield, the
• If warm air to the floor is desired
air intake control is set to the outside
while defrosting or defogging, set
2
(fresh) air position automatically if
the mode to the floor-defrost posi-
any of following occur.
tion.
• The mode is selected to the
,
3
• Before driving, clear all snow and
or
while the system is
ice from the windshield, rear win-
activated.
dow, outside rear view mirrors, and
4
• The ignition switch is turned on
all side windows.
1KMN2155
while the mode is selected to the
How to cancel or return defogging
• Clear all snow and ice from the
,
or
.
logic of manual climate control system
5
hood and air inlet in the cowl grill to
• The ignition switch is turned off.
improve heater and defroster effi-
1. Turn the ignition switch to the “ON”
ciency and to reduce the probabili-
• The fan is off.
position.
6
ty of fogging up inside of the wind-
• The fan begins to be operated.
2. Turn the mode selection knob to
shield.
the defrost position ( ).
Press the air intake control button to
7
select the recirculated air position
3. Push the air intake control button
while the ignition switch is on.
(
) at least 5 times within 3 sec-
onds.
8
9
4 90
English 
