2004-2010 Kia Sportage SUV Maintenance -> Automatic transaxle User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance -> Automatic transaxle for Your Kia Sportage SUV Second Generation (2004-2010)

Maintenance
AUTOMATIC TRANSAXLE (IF EQUIPPED)
2. After the transaxle is warmed up
sufficiently (fluid temperature
70~80 °C (158~176 °F)), for exam-
ple by 10 minutes usual driving,
1
shift the selector lever through all
positions then place the selector
2
lever in N (Neutral) or P (Park)
position.
HOT
3
COLD
4
1KMN5051
1LDE5009
Checking the automatic
3. Confirm that the fluid level is in
“HOT” range on the level gauge. If
transaxle fluid level
5
the fluid level is lower, add the
The automatic transaxle fluid level
specified fluid from the fill hole. If
should be checked regularly.
6
the fluid level is higher, drain the
Keep the vehicle on the level ground
fluid from the drain hole.
with the parking brake applied and
4. If the fluid level is checked in cold
7
check the fluid level according to the
condition (fluid temperature 20~
following procedure.
30 °C (68~86 °F) add the fluid to
1. Place the selector lever in N
“COLD” line and then recheck the
8
(Neutral) position and confirm the
fluid level according to the above
engine is running at normal idle
step 2.
9
speed.
7 23
Maintenance
✽ NOTICE
Changing the automatic
WARNING - Transaxle
transaxle fluid
“COLD” scale is for reference only
fluid
and should NOT be used to deter-
Have automatic transaxle fluid
1
The transaxle fluid level should
mine transaxle fluid level.
changed by an Authorized Kia
be checked when the engine is at
Dealer according to the Maintenance
normal operating temperature.
Schedule at the beginning of this
✽ NOTICE
2
This means that the engine, radi-
section.
New automatic transaxle fluid
ator, radiator hose and exhaust
Use only the specified automatic
should be red. The red dye is added
system etc., are very hot.
3
transaxle
fluid.
(Refer
to
so the assembly plant can identify it
Exercise great care not to burn
"Recommended Lubricants" later in
as automatic transaxle fluid and dis-
yourself during this procedure.
this section.)
tinguish it from engine oil or
4
antifreeze. The red dye, which is not
an indicator of fluid quality, is not
CAUTION
5
permanent. As the vehicle is driven,
• Low
fluid
level
causes
the automatic transaxle fluid will
transaxle slippage. Overfilling
begin to look darker. The color may
6
can cause foaming, loss of fluid
eventually appear light brown.
and transaxle malfunction.
Therefore, have an Authorized Kia
dealer change the automatic
7
• The use of a non-specified fluid
transaxle fluid according to the
could result in transaxle mal-
Scheduled Maintenance at the
function and failure.
8
beginning of this section.
WARNING - Parking brake
9
To avoid sudden movement of
the vehicle, apply parking brake
and depress the brake pedal
before moving the shift lever.
7 24

Related Topics

Popular Owner Manuals