What to do in an emergency
If the engine overheats
Push-starting
If the engine overheats
Vehicles equipped with automatic trans
mission cannot be push-started, and
-
If your temperature gauge indicates
overheating, you experience a loss of
power, or hear a loud pinging or knock
only jump starting can be applied. Fol
low the directions in this section for
"Jump-starting" on page 7-5.
-
-
ing, the engine will probably be too hot.
If this happens, you should:
1. Pull off the road and stop as soon as it
is safe to do so.
Tow starting vehicle
2. Shift the gear to P (Park) and set the
parking brake.
Never tow a vehicle to start it.
When the engine starts, the vehicle can
suddenly surge forward and could cause
a collision with the tow vehicle.
3. If the air conditioning is on, turn it off.
4. If engine coolant is running out under
the vehicle or steam is coming out
from underneath the hood, stop the
engine. Do not open the hood until the
coolant has stopped running or the
steaming has stopped.
5. If there is no visible loss of engine
coolant and no steam, leave the
engine running and check to be sure
the engine cooling fan is operating.
1) If the fan is not running, turn the
engine off.
6. Check to see if the water pump drive
belt is missing.
1) If it is not missing, check to see that
it is tight.
7
2) If the drive belt seems to be satis
-
factory, check for coolant leaking
from the radiator, hoses or under
the vehicle. (If the air conditioning
had been in use, it is normal for
cold water to be draining from it
when you stop).
WARNING
Under the hood
While the engine is running, keep
hair, hands and clothing away
7
7
English 
