2024-2026 Lexus LBX SUV Before driving -> Adjusting the seats User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Before driving -> Adjusting the seats for Your Lexus LBX SUV First Generation (2024-2026)

154
3-3. Adjusting the seats
3-3.A djusting the s eats
Manual seat
Seat position adjustment lever
Seatback angle adjustment lever
Vertical height adjustment lever (if
equipped)
Lumbar support adjustment switch
(for driver’s side) (if equipped)
Power seat (for driver’s side)
Seat position adjustment switch
Seat cushion (front) angle adjust-
ment switch
Seatback angle adjustment switch
Vertical height adjustment switch
Lumbar support adjustment switch
■ When adjusting the seat
● Make sure that any surrounding passen-
gers or objects are not contact the seat.
● Take care when adjusting the seat so that
the head restraint does not touch the ceil-
ing.
■ Power easy access system (vehicles
with driving position memory)
The driver’s seat moves in accordance with
power switch mode and the driver’s seat
belt condition. (P.168)
■ Jam protection function (vehicles with
driving position memory)
While the driving position is recalled or the
power easy access system is operating, if an
object is stuck behind the front seat, the
front seat will stop and then slightly move
forward. When the jam protection function
operates, the seat stops at a position other
Front seats
The seats can be adjusted (longitu-
dinally, vertically, etc.). Adjust the
seat to ensure the correct driving
posture.
Adjustment procedure
A
B
C
D
A
B
C
D
E
155
3
3-3. Adjusting the seats
Before driving
than the set seat position. Check the seat
position.
■ Folding down the rear seatbacks
1 Move the front seats forward.
(P.154)
2 Stow the rear center seat belt
buckle.
3 Lower the head restraints to the
lowest position. (P.157)
4 Pull the seatback lock release lever
and fold the seatback down.
Each seatback may be folded separately.
■ Returning the rear seatbacks
Raise the rear seatback until it locks.
WARNING
■ When adjusting the seat position
● Take care when adjusting the seat
position to ensure that other passen-
gers are not injured by the moving
seat.
● Do not put your hands under the seat
or near the moving parts to avoid
injury.
Fingers or hands may become
jammed in the seat mechanism.
● Make sure to leave enough space
around the feet so they do not get
stuck.
■ Seat adjustment
● To reduce the risk of sliding under the
lap belt during a collision, do not
recline the seat more than necessary.
If the seat is too reclined, the lap belt
may slide past the hips and apply
restraint forces directly to the abdo-
men, or your neck may contact the
shoulder belt, increasing the risk of
death or serious injury in the event of
an accident.
Adjustments should not be made while
driving as the seat may unexpectedly
move and cause the driver to lose con-
trol of the vehicle.
● Manual seat: After adjusting the seat,
make sure that the seat is locked in
position.
Rear seats
The seatbacks of the rear seats can
be folded down.
Folding down and returning the
rear seatbacks
156
3-3. Adjusting the seats
Check that the seat belts are not
twisted or caught in the seatback.
WARNING
■ When folding the rear seatbacks
down
Observe the following precautions.
Failure to do so may result in death or
serious injury.
● Do not attempt to fold the seatbacks
down while driving.
● Stop the vehicle on level ground, set
the parking brake and shift the shift
position to P.
● Do not allow anyone to sit on a folded
seatback or in the luggage compart-
ment while driving.
● Do not allow children to enter the lug-
gage compartment.
● Do not operate the rear seat if it is
occupied.
● Be careful not to get feet or hands
caught in the moving parts or joints of
the seats during operation.
● Do not allow children to operate the
seat.
■ After returning the rear seatback to
the upright position
Observe the following precautions.
Failure to do so may result in death or
serious injury.
● Make sure that the seatback is
securely locked in position by lightly
pushing it back and forth. If the seat-
back is not securely locked, the red
marking will be visible on the seatback
lock release lever. Make sure that the
red marking is not visible.
● Check that the seat belts are not
twisted or caught in the seatback.
If the seat belt gets caught between the
seatback’s securing hook and latch, it
may damage the seat belt.
157
3
3-3. Adjusting the seats
Before driving
■ Front seats
1 Up
Pull the head restraints up.
2 Down
Push the head restraint down while press-
ing the lock release button .
■ Rear seats
1 Up
Pull the head restraints up.
2 Down
Push the head restraint down while press-
ing the lock release button .
■ Adjusting the height of the head
restraints (front seats)
Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.
■ Adjusting the rear seat head restraint
Always raise the head restraint one level
from the stowed position when using.
■ Front and rear center seats
Pull the head restraint up while press-
ing the lock release button .
If the head restraint touches the ceiling,
making the removal difficult, change
the seat height or angle. (P.154,
Head restraints
Head restraints are provided for all
seats.
WARNING
■ Head restraint precautions
Observe the following precautions
regarding the head restraints. Failure to
do so may result in death or serious
injury.
● Use the head restraints designed for
each respective seat.
● Adjust the head restraints to the cor-
rect position at all times.
● After adjusting the head restraints,
push down on them and make sure
they are locked in position.
● Do not drive with the head restraints
removed.
Vertical adjustment
A
Removing the head restraints
A
A
158
3-3. Adjusting the seats
155)
■ Rear outboard seats
1 Pull the seatback lock release lever
and fold down the seatback until it
reaches the position where the
head restraints can be removed.
2 Pull the head restraint up while
pressing the lock release button
.
■ Front and rear center seats
Align the head restraint with the instal-
lation holes and push it down to the
lock position.
Press and hold the lock release button
when lowering the head restraint.
■ Rear outboard seats
1 Pull the seatback lock release lever
and fold down the seatback until it
reaches the position where the
head restraints can be installed.
2 Align the head restraint with the
installation holes and push it down
to the lock position.
Press and hold the lock release button
A
Installing the head restraints
A
A
159
3
3-3. Adjusting the seats
Before driving
when lowering the head restraint.

Related Topics

Popular Owner Manuals