2024-2026 Lexus LBX SUV Before driving -> Opening/closing the back door (vehicles with power back door) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Before driving -> Opening/closing the back door (vehicles with power back door) for Your Lexus LBX SUV First Generation (2024-2026)

141
3
3-2. Opening, closing and locking the doors
Before driving
2 Loosen the screw.
3 Turn the cover.
4 Move the lever.
5 When installing, reverse the steps listed.
■ Opening/closing the back door
using the wireless remote control
Press and hold the switch for approxi-
mately 1 second.
The power back door can be operated
when it is unlocked
*
.
Pressing the switch while the power
back door is opening/closing will stop
the operation.
NOTICE
■ Back door damper stays
The back door is equipped with damper
stays that hold the back door in
place.
Observe the following precautions.
Failure to do so may cause damage to
the back door damper stay resulting
in malfunction.
● Do not attach any foreign objects,
such as stickers, plastic sheets, or
adhesives to the damper stay rod.
● Do not touch the damper stay rod with
gloves or other fabric items.
● Do not attach any accessories other
than genuine Lexus parts to the back
door.
● Do not place your hand on the damper
stay or apply lateral forces to it.
Opening/closing the back door
(vehicles with power back door)
A
A
142
3-2. Opening, closing and locking the doors
Pressing and holding the switch again
for approximately 1 second will oper-
ate the power back door in the oppo-
site direction.
*
: Opening of the power back door when it
is locked can be enabled by a custom-
ized setting. (P.556)
■ Opening/closing the back door
from the inside
Press and hold the switch for approxi-
mately 1 second.
A buzzer will sound and the power back
door will automatically open or close.
However, if the power back door is locked,
it will not open.
Pressing the switch while the power back
door is opening/closing will stop the oper-
ation.
Pressing and holding the switch again for
approximately 1 second will operate the
power back door in the opposite direction.
Left-hand drive vehicles
Right-hand drive vehicles
■ Opening/closing the back door
from the outside
Open
When the back door is unlocked: Press the
back door opener switch.
When the back door is locked: While car-
rying the electronic key on your person,
press the back door opener switch.
A buzzer will sound and the back door will
automatically open.
Pressing the switch while the power back
door is opening/closing will stop the oper-
ation.
Close
Press the switch.
A buzzer sounds and the back door will
automatically close.
Pressing the switch while the back door is
closing will stop the operation.
Pressing the switch again will open the
back door automatically.
143
3
3-2. Opening, closing and locking the doors
Before driving
Close the back door and lock all
doors after moving away from the
back door (close & lock [Walk-
Away] function)
*
*
: This setting can be customized at any
authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
1 Close all of the doors except the
back door, carrying an electronic
key and press the switch on the
lower part of the back door.
A different buzzer than the normal one will
sound and the close & lock (Walk-Away)
function will go into standby.
2 While the buzzer is sounding, move
away from the back door.
When the sensor detects that you are
away from the back door, the buzzer will
sound. Depending on the direction of mov-
ing away from the back door, the location
and how to hold the electronic key or cir-
cumstances, it may not be detected prop-
erly.
All the doors other than the back door will
be locked, and after the back door is
closed, the back door will also be locked.
When all the doors have been closed and
locked, the buzzer (if equipped) will sound
and the emergency flashers will flash.
The standby state is canceled if you do not
move away from the back door for 30 sec-
onds. To operate the function again, per-
form the procedure again from the
beginning.
If you approach the back door carrying the
electronic key, the back door operation
will stop, all the doors will be unlocked, and
the buzzer (if equipped) will sound and the
emergency flashers will flash.
If the switch is pressed after the back
door operation has stopped, the close &
lock (Walk-Away) function will go into
standby again.
Close the back door and lock all
doors (close & lock function)
Press the switch.
A different buzzer than the normal one will
sound and the power back door will begin
closing automatically. When the power
back door is closed, all of the doors will
lock simultaneously and operation signals
will indicate that all of the doors have been
locked.
If the switch is pressed while the power
back door is closing, the operation will
stop.
Pressing the switch again will open the
power back door automatically.
Vehicles with Double locking system: The
double locking system will not operate at
this time.
144
3-2. Opening, closing and locking the doors
■ Closing the back door using the
back door handle
Lower the back door using the back
door handle, then a buzzer sounds and
the back door automatically closes.
■ Luggage compartment light
● The luggage compartment light turns on
when the back door is opened.
● If the luggage compartment light is left on
when the power switch is turned off, the
light will go off automatically after 10 min-
utes.
■ Power back door operating conditions
With the power back door operations set to
ON, it can automatically open and close for
the following conditions:
● The power back door is unlocked. How-
ever, the power back door will operate if
it is locked, in the following situations:
• When an electronic key is being carried
and the back door opener switch is
pressed
• When opening of the power back door
using the wireless remote control when it
is locked is enabled by a customized set-
ting.
● When the power switch is in ON during
opening operations, the back door
unlocks and operates for any of the fol-
lowing conditions:
• Parking brake is engaged
• The brake pedal is depressed
• The shift position is in P
■ Back door closer
In the event that the back door is left slightly
open, the back door closer will automati-
cally close it to the fully closed position.
Whatever the state of the power switch, the
back door closer operates.
■ Operation of the power back door
● A buzzer sounds to indicate that the back
door is opening/closing.
● When the power back door operations
are OFF, the power back door does not
operate but it can be opened and closed
by hand.
● When the power back door automati-
cally opens, if an abnormality due to peo-
ple or objects is detected, operation will
stop.
■ Back door reserve lock function
This function reserves locking of all doors
beforehand, when the power back door is
open.
When the following procedure is per-
formed, all the doors except the power
back door are locked and then power back
door will also be locked at the same time it
is closed.
1 Close all doors, except the back door.
2 During the power back door closing
operation, lock the doors using the
smart entry & start system (P.140) or
the wireless remote control. (P.129)
A buzzer sounds and the emergency flash-
ers flash to indicate that all the doors have
been closed and locked.
Before leaving the vehicle, make sure that
all the doors are closed and locked. The
doors may not be locked due to the jam
protection function or door lock prevention
145
3
3-2. Opening, closing and locking the doors
Before driving
function.
■ Close & lock function
When the power back door is open, this
function closes the power back door and
then locks all of the doors simultaneously.
When the following procedures are per-
formed and there are no electronic keys for
the vehicle within the vehicle, all of the
doors will lock when the power back door is
completely closed.
1 Close all of the doors except the power
back door.
2 While carrying an electronic key, press
the switch on the lower part of
the power back door (P.142).
A different buzzer than the normal one will
sound and then the power back door will
begin closing automatically. When the
power back door is closed, all of the doors
will lock simultaneously and operation sig-
nals will indicate that all of the doors have
been locked.
The double locking system will not operate
at this time.
■ Situations in which the close & lock
function may not operate properly
In the following situations, the close & lock
function may not operate properly:
● If the switch on the lower part of
the power back door (P.142) is
pressed by a hand which is holding an
electronic key
● If the switch on the lower part of
the power back door (P.142) is
pressed when the electronic key is in a
bag, etc. that is placed on the ground
● If the switch on the lower part of
the power back door (P.142) is
pressed with the electronic key not near
the vehicle.
■ When reconnecting the 12-volt battery
To enable the power back door to operate
properly, close the back door manually.
■ Jam protection function
Sensors are installed in the right and left
sides of the power back door. When the
door is automatically closing and the sen-
sors are pushed due to an object being
clamped, etc., the jam protection function
operates.
From that position the door automatically
moves a little in the opposite direction and
then the function stops.
■ If the back door opener is inoperative
The back door can be unlocked from the
inside.
1 Remove the cover.
To prevent damage, cover the tip of the
screwdriver with a rag.
2 Loosen the screw.
3 Turn the cover.
146
3-2. Opening, closing and locking the doors
4 Move the lever.
5 When installing, reverse the steps listed.
■ Customization
Some functions can be customized. (Cus-
tomizable features: P.556)
WARNING
■ Back door closer
● In the event that the back door is left
slightly open, the back door closer will
automatically close it to the fully closed
position. It takes several seconds
before the back door closer begins to
operate. Be careful not to catch fingers
caught or anything else in the back
door, as this may cause bone fractures
or other serious injuries.
● Be careful not to catch fingers or any-
thing else when using the back door
closer as it still operates when the
power back door system is canceled.
■ Power back door
Observe the following precautions when
operating the power back door.
Failure to do so may cause death or seri-
ous injury.
● Check the safety of the surrounding
area to make sure there are no obsta-
cles or anything that could cause any
of your belongings to get caught.
● If anyone is in the vicinity, make sure
they are safe and let them know that
the back door is about to open or
close
● If the power back door system is dis-
abled, while the back door is operating
automatically, the automatic opera-
tion is stopped. The back door then
has to be operated manually. Take
extra care in this situation, as the back
door may open or close suddenly.
● If the operating conditions of the
power back door (P.144) are no
longer met, a buzzer may sound and
the back door may stop opening or
closing. The back door then has to be
operated manually. Take extra care
when on an incline, as the back door
may open or close abruptly.
● On an incline, the back door may sud-
denly shut after it opens. Make sure
the back door is fully open and secure.
● In the following situations, the power
back door may detect an abnormality
and automatic operation may be
stopped. In this case, the back door
has to be operated manually. Take
extra care in this situation, as the back
door may open or close suddenly.
• When the back door contacts an
obstacle
• When the 12-volt battery voltage sud-
denly drops, such as when the power
switch is turned to ON or the hybrid
system is started during automatic
operation
147
3
3-2. Opening, closing and locking the doors
Before driving
WARNING
● If a bicycle carrier or similar heavy
object is attached to the back door, the
power back door may not operate,
causing itself to malfunction, or the
back door may suddenly shut again
after being opened, causing some-
one’s hands, arms, head or neck to be
caught and injured. When installing an
accessory part to the back door, ask
any authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer for details.
■ Jam protection function
Observe the following precautions.
Failure to do so may cause death or seri-
ous injury.
● Never use any part of your body to
intentionally activate the jam protec-
tion function.
● The jam protection function may not
work if something gets caught just
before the back door fully closes. Be
careful not to get fingers caught or
anything else.
● The jam protection function may not
work depending on the shape of the
object that is caught. Be careful not to
catch fingers or anything else.
NOTICE
■ Back door spindles
The back door is equipped with spindles
that hold the back door in place.
Observe the following precautions.
Failure to do so may cause damage to
the back door spindle , resulting in
malfunction.
● Do not attach any foreign objects,
such as stickers, plastic sheets, or
adhesives to the spindle rod.
● Do not touch the spindle rod with
gloves or other fabric items.
● Do not attach any accessories other
than genuine Lexus parts to the power
back door.
● Do not place your hand on the spindle
or apply lateral forces to it.
■ To prevent back door closer malfunc-
tion
● Do not apply excessive force to the
back door while the back door closer
is operating. Applying excessive force
may cause the back door closer to
malfunction.
● If the power back door is opened and
closed repeatedly in a short amount of
time, the back door closer may stop
operating. In this case, manually open
the power back door once and wait for
a while before attempting to close it
again.
A
A
148
3-2. Opening, closing and locking the doors
The power back door system can be
enabled/disabled on the Center Dis-
play. (P.556)
1 Select on the Center Display.
2 Select “Vehicle customise”.
3 Select “Door control”.
4 Select “Power back door”.
5 Select (ON)/
(OFF).
When OFF is selected and the operations
of the power back door is made to stop
from the Center Display, unless it is set to
ON, the operation of the power back door
will not return. (No return in the power
switch operation)
The open position of the power back
door can be adjusted.
1 Stop the back door in the desirable
position. (P.141)
2 Press and hold the power back
door switch on the back door for 2
seconds.
• When the settings are completed,
the buzzer sounds 4 times.
• When opening the back door the
next time, the back door will stop at
that position.
NOTICE
■ To prevent damage to the power
back door
● Make sure that there is no ice between
the back door and frame that would
prevent movement of the back door.
Operating the power back door when
excessive load is present on the back
door may cause a malfunction.
● Do not apply excessive force to the
back door while the power back door
is operating.
● Take care not to damage the sensors
(installed on the right and left edges of
the power back door) (P.145) with a
knife or other sharp object. If the sen-
sor is disconnected, the power back
door will not close automatically.
■ Close & lock function
When closing the power back door
using the close & lock function, a differ-
ent buzzer than the normal one will
sound before the operation begins.
To check that the operation has started
correctly, check that a different buzzer
than the normal one has sounded.
Additionally, when the power back door
is fully closed and locked, operation sig-
nals will indicate that all of the doors have
been locked.
Before leaving the vehicle, make sure
that the operation signals have operated
and that all of the doors are locked.
Canceling the power back door
system (vehicles with power
back door)
Adjusting the open position of
the back door (vehicles with
power back door)

Related Topics

Popular Owner Manuals