450
6-3. Do-it-yourself maintenance
■ Checking the oil type and prepar-
ing the items needed
Make sure to check the oil type and
prepare the items needed before add-
ing oil.
Engine oil selection
P.549
Oil quantity (Low level mark
Refill upper limit mark)
1.2 L (1.3 qt., 1.1 Imp. qt.)
Items
Clean funnel
■ Adding engine oil
If the oil level is below or near the low
level mark, add engine oil of the same
type as that already in the engine.
1 Remove the oil filler cap by turning
it counterclockwise.
2 Add engine oil slowly, checking the
dipstick.
Make sure that the oil level does not
exceed the refill upper limit mark and is
between the low level mark and refill upper
limit mark.
Low level mark
Refill upper limit mark
The shape of the dipstick may differ
depending on the type of vehicle or
engine.
3 Install the oil filler cap by turning it
clockwise.
4 When installing the cover, reverse
the steps listed.
■ After changing the engine oil
After the engine oil has been replaced, the
engine oil maintenance data should be
reset. Perform the following procedures:
1 Select on the Center Display.
2 Select “Vehicle customise”.
3 Select “Utility”.
4 Select “Oil maintenance”.
5 Select “Reset”.
“The data has been reset.” will be displayed
on the Center Display when the reset pro-
cedure has been completed.
Adding engine oil
A
B