2024-2026 Lexus LBX SUV When trouble arises -> Steps to take in an emergency User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

When trouble arises -> Steps to take in an emergency for Your Lexus LBX SUV First Generation (2024-2026)

485
7
7-2. Steps to take in an emergency
When trouble arises
7-2.Ste ps to take in a n emergency
In the following situations, it is not pos-
sible to be towed by another vehicle
using cables or chains, as the front
wheels may be locked due to the park-
ing lock. Contact any authorized Lexus
retailer or Lexus authorized repairer,
or any reliable repairer or commercial
towing service.
There is a malfunction in the shift
control system. (P.499)
There is a malfunction in the immo-
bilizer system. (P.85)
There is a malfunction in the smart
entry & start system. (P.528)
The 12-volt battery is discharged.
(P.533)
The following may indicate a problem
with your transmission. Contact any
authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer or commercial towing service
before towing.
The hybrid system warning message
is shown on the multi-information
display and the vehicle does not
move.
The vehicle makes an abnormal
sound.
From the front (2WD models)
Release the parking brake.
Turn automatic mode off. (P.206)
If your vehicle needs to be
towed
If towing is necessary, we recom-
mend having your vehicle towed by
any authorized Lexus retailer or
Lexus authorized repairer, or any
reliable repairer or commercial
towing service, using a wheel-lift
type truck or flatbed truck.
Use a safety chain system for all
towing, and abide by all state/pro-
vincial and local laws.
Situations when it is not possible
to be towed by another vehicle
Situations when it is necessary to
contact dealers before towing
Towing with a wheel-lift type
truck
486
7-2. Steps to take in an emergency
From the front (AWD models)
Use a towing dolly under the rear
wheels.
From the rear
Use a towing dolly under the front
wheels.
WARNING
Observe the following precautions.
Failure to do so may result in death or
serious injury.
■ When towing the vehicle
2WD models
Be sure to transport the vehicle with the
front wheels raised or with all four wheels
raised off the ground. If the vehicle is
towed with the front wheels contacting
the ground, the drivetrain and related
parts may be damaged or electricity
generated by the operation of the motor
may cause a fire to occur depending on
the nature of the damage or malfunction.
AWD models
Be sure to transport the vehicle with all
four wheels raised off the ground. If the
vehicle is towed with the tires contacting
the ground, the drivetrain or related
parts may be damaged, the vehicle may
fly off the truck, or electricity generated
by the operation of the motor may cause
a fire to occur depending on the nature
of the damage or malfunction.
487
7
7-2. Steps to take in an emergency
When trouble arises
When using a flat-bed truck to trans-
port the vehicle, use tire strapping
belts. Refer to the owner’s manual of
the flat-bed truck for the tire strapping
method.
In order to suppress vehicle movement
during transportation, set the parking
brake and turn the power switch off.
If a tow truck is not available in an
emergency, your vehicle may be tem-
porarily towed using cables or chains
secured to the emergency towing eye-
let. This should only be attempted on
hard surfaced roads for short distances
at under 30 km/h (18 mph).
A driver must be in the vehicle to steer
and operate the brakes. The vehicle’s
wheels, drive train, axles, steering and
brakes must be in good condition.
To have your vehicle towed by another
vehicle, the towing eyelet must be
installed to your vehicle. Install the tow-
ing eyelet using the following proce-
dure.
1 Take out the wheel bolt wrench (if
equipped) and towing eyelet.
(P.508, 519)
2 Remove the eyelet cover using a
flathead screwdriver.
To protect the bodywork, place a rag
between the screwdriver and the vehicle
body as shown in the illustration.
NOTICE
■ To prevent damage to the vehicle
when towing using a wheel-lift type
truck
● Vehicles with steering lock function:
Do not tow the vehicle from the rear
when the power switch is off. The
steering lock mechanism is not strong
enough to hold the front wheels
straight.
● When raising the vehicle, ensure ade-
quate ground clearance for towing at
the opposite end of the raised vehicle.
Without adequate clearance, the vehi-
cle could be damaged while being
towed.
■ Towing with a sling-type truck
Do not tow with a sling-type truck to pre-
vent body damage.
Using a flatbed truck
Emergency towing
Emergency towing procedure
488
7-2. Steps to take in an emergency
3 Insert the towing eyelet into the
hole and tighten partially by hand.
4 Tighten down the towing eyelet
securely using a wheel bolt wrench
(if equipped) or hard metal bar.
5 Securely attach cables or chains to
the towing eyelet.
Take care not to damage the vehicle body.
6 Enter the vehicle being towed and
start the hybrid system.
If the hybrid system does not start, turn the
power switch to ON.
7 Shift the shift position to N and
release the parking brake.
Turn automatic mode off. (P.206)
■ While towing
If the hybrid system is off, the power assist
for the brakes and steering will not function,
making steering and braking more difficult.
■ Wheel bolt wrench
Vehicles with wheel bolt wrench: Wheel
bolt wrench is installed in luggage compart-
ment. (P.508, 519)
Vehicles without wheel bolt wrench: Wheel
bolt wrench can be purchased at any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
WARNING
Observe the following precautions. Fail-
ure to do so may result in death or seri-
ous injury.
■ While towing
● When towing using cables or chains,
avoid sudden starts, etc. which place
excessive stress on the towing eyelet,
cables or chains. The towing eyelet,
cables or chains may become dam-
aged, broken debris may hit people,
and cause serious damage.
● Do not perform any of the following as
doing so may cause the parking lock
mechanism to engage, locking the
front wheels and possibly leading to an
accident resulting in death or serious
injury:
• Unfasten the driver’s seat belt and
open the driver’s door.
• Turn the power switch off.
■ Installing towing eyelets to the vehi-
cle
Make sure that towing eyelets are
installed securely.
If not securely installed, towing eyelets
may come loose during towing.
NOTICE
■ To prevent damage to the vehicle
during emergency towing
Do not secure cables or chains to the
suspension components.
489
7
7-2. Steps to take in an emergency
When trouble arises
Fluid leaks under the vehicle
(Water dripping from the air condi-
tioning after use is normal.)
Flat-looking tires or uneven tire
wear
Engine coolant temperature gauge
continually points higher than nor-
mal
Changes in exhaust sound
Excessive tire squeal when corner-
ing
Strange noises related to the sus-
pension system
Pinging or other noises related to
the hybrid system
Engine missing, stumbling or run-
ning roughly
Appreciable loss of power
Vehicle pulls heavily to one side
when braking
Vehicle pulls heavily to one side
when driving on a level road
Loss of brake effectiveness, spongy
feeling, pedal almost touches the
floor
If you think something is
wrong
If you notice any of the following
symptoms, your vehicle probably
needs adjustment or repair. Con-
tact any authorized Lexus retailer
or Lexus authorized repairer, or
any reliable repairer as soon as pos-
sible.
Visible symptoms
Audible symptoms
Operational symptoms
490
7-2. Steps to take in an emergency
■ Brake system warning light (warning buzzer)
■ Brake system warning light
■ High coolant temperature warning light
*
(warning buzzer)
*
: This light illuminates on the multi-information display with a message.
If a warning light turns on or a warning buzzer sounds
Calmly perform the following actions if any of the warning lights comes on or
flashes. If a light comes on or flashes, but then goes off, this does not necessar-
ily indicate a malfunction in the system. However, if this continues to occur,
have the vehicle inspected by any authorized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer.
Actions to the warning lights or warning buzzers
Warning light Details/Actions
(Red)
Indicates that:
The brake fluid level is low; or
The brake system is malfunctioning
Immediately stop the vehicle in a safe place and contact any autho-
rized Lexus retailer or Lexus authorized repairer, or any reliable
repairer. Continuing to drive the vehicle may be dangerous.
Warning light Details/Actions
(Yellow)
Indicates a malfunction in:
The regenerative braking system;
The electronically controlled brake system; or
The electric parking brake
Have the vehicle inspected by any authorized Lexus retailer or
Lexus authorized repairer, or any reliable repairer immediately.
Warning light Details/Actions
Indicates that the engine is overheating
Immediately stop the vehicle in a safe place and check the vehicle.
(P.539)
491
7
7-2. Steps to take in an emergency
When trouble arises
■ Charging system warning light
*
(warning buzzer)
*
: This light illuminates on the multi-information display with a message.
■ Low engine oil pressure warning light
*
(warning buzzer)
*
: This light illuminates on the multi-information display with a message.
■ Hybrid system overheat warning light
*
(warning buzzer)
*
: This light illuminates on the multi-information display with a message.
■ Malfunction indicator lamp
Warning light Details/Actions
Indicates a malfunction in the vehicle’s charging system
Immediately stop the vehicle in a safe place and contact any autho-
rized Lexus retailer or Lexus authorized repairer, or any reliable
repairer.
Warning light Details/Actions
Indicates that the engine oil pressure is too low
Immediately stop the vehicle in a safe place and contact any autho-
rized Lexus retailer or Lexus authorized repairer, or any reliable
repairer.
Warning light Details/Actions
Indicates the hybrid system has overheated
This light may be displayed when driving under severe operating condi-
tions. (For example, when driving up a long steep hill.)
Stop the vehicle in a safe place.
Handling method (P.539)
Warning light Details/Actions
Indicates a malfunction in:
The hybrid system;
The electronic engine control system; or
The electronic throttle control system
Have the vehicle inspected by any authorized Lexus retailer or
Lexus authorized repairer, or any reliable repairer immediately.
492
7-2. Steps to take in an emergency
■ SRS warning light
■ ABS warning light
■ Inappropriate pedal operation warning light
*
(warning buzzer)
*
: This light illuminates on the multi-information display with a message.
Warning light Details/Actions
Indicates a malfunction in:
The SRS airbag system; or
The seat belt pretensioner system
Have the vehicle inspected by any authorized Lexus retailer or
Lexus authorized repairer, or any reliable repairer immediately.
Warning light Details/Actions
Indicates a malfunction in:
The ABS; or
The brake assist system
Have the vehicle inspected by any authorized Lexus retailer or
Lexus authorized repairer, or any reliable repairer immediately.
Warning light Details/Actions
When a buzzer sounds:
Brake Override System is malfunctioning
Drive-Start Control is malfunctioning
Drive-Start Control is operating
Follow the instructions displayed on the multi-information display.
When a buzzer does not sound:
Brake Override System is operating.
Release the accelerator pedal and depress the brake pedal.
493
7
7-2. Steps to take in an emergency
When trouble arises
■ Electric power steering system warning light (warning buzzer)
■ Low fuel level warning light
■ Driver’s and front passenger’s seat belt reminder light (warning buzzer)
*
*
: Driver’s and front passenger’s seat belt warning buzzer:
The driver’s and front passenger’s seat belt warning buzzer sounds to alert the
driver and front passenger that his or her seat belt is not fastened. If the seat belt is
unfastened, the buzzer sounds intermittently for a certain period of time after the
vehicle reaches a certain speed.
Warning light Details/Actions
(Red)
or
(Yellow)
Indicates a malfunction in the EPS (Electric Power Steering) system
Have the vehicle inspected by any authorized Lexus retailer or
Lexus authorized repairer, or any reliable repairer immediately.
Warning light Details/Actions
Indicates that remaining fuel is approximately 5.4 L (1.4 gal., 1.2 Imp.
gal.) or less
Refuel the vehicle.
Warning light Details/Actions
Warns the driver and/or front passenger to fasten their seat belts
Fasten the seat belt.
If the front passenger’s seat is occupied, the front passenger’s seat
belt also needs to be fastened to make the warning light (warning
buzzer) turn off.
494
7-2. Steps to take in an emergency
■ Rear passengers’ seat belt reminder lights
*1
(warning buzzer)
*2
*1
: This light illuminates on the multi-information display.
Regardless of whether or not a rear passenger is present, if the power switch is
turned to ON with the rear seat belts unfastened, this light will also illuminate for a
certain period of time.
*2
: Rear passengers’ seat belt warning buzzer:
The rear passengers’ seat belt warning buzzer sounds to alert the rear passenger
that his or her seat belt is not fastened. If the seat belt is unfastened, the buzzer
sounds intermittently for a certain period of time after the vehicle reaches a certain
speed.
■ Tire pressure warning light (warning buzzer)
Warning light Details/Actions
(if equipped)
(if equipped)
Warns the rear passengers to fasten their seat belts
Fasten the seat belt.
Warning light Details/Actions
When the light comes on (a buzzer sounds):
Low tire inflation pressure from natural causes
After the temperature of the tires has lowered sufficiently, check
the inflation pressure of each tire and adjust them to the specified
level.
Low tire inflation pressure from flat tire
Immediately stop the vehicle in a safe place and perform the nec-
essary actions.
When the light comes on after blinking for approximately 1 minute (a
buzzer does not sounds):
Malfunction in the tire pressure warning system
Have the system checked by any authorized Lexus retailer or
Lexus authorized repairer, or any reliable repairer.
495
7
7-2. Steps to take in an emergency
When trouble arises
■ PCS warning light (warning buzzer)
■ LTA indicator (warning buzzer)
■ LDA indicator (warning buzzer)
■ PDA indicator (warning buzzer)
■ Cruise control indicator (warning buzzer)
■ Dynamic radar cruise control indicator (warning buzzer)
Warning light Details/Actions
Indicates a malfunction in the PCS (Pre-Collision System).
Follow the instructions displayed on the multi-information display.
If the PCS (Pre-Collision System) or VSC (Vehicle Stability Control)
system is disabled, the PCS warning light will illuminate.
Warning light Details/Actions
(Yellow)
Indicates a malfunction in the LTA (Lane Tracing Assist)
Follow the instructions displayed on the multi-information display.
Warning light Details/Actions
(Yellow)
Indicates a malfunction in the LDA (Lane Departure Alert)
Follow the instructions displayed on the multi-information display.
Warning light Details/Actions
(Yellow)
Indicates a malfunction in the PDA (Proactive Driving Assist).
Follow the instructions displayed on the multi-information display.
Warning light Details/Actions
(Yellow)
Indicates a malfunction in the cruise control system.
Follow the instructions displayed on the multi-information display.
Warning light Details/Actions
(Yellow)
Indicates a malfunction in the dynamic radar cruise control system.
Follow the instructions displayed on the multi-information display.
496
7-2. Steps to take in an emergency
■ Speed limiter indicator (warning buzzer)
■ Driving assist information indicator
■ Lexus parking assist-sensor OFF indicator (warning buzzer)
Warning light Details/Actions
(Yellow)
Indicates a malfunction in the speed limiter.
Follow the instructions displayed on the multi-information display.
Warning light Details/Actions
Indicates one of the following systems is malfunctioning.
PCS (Pre-Collision System)
LDA (Lane Departure Alert)
Automatic Rear Flashing Hazard Lights (if equipped)
Secondary Collision Brake (Rear Impacts while Stopped) (if
equipped)
Follow the instructions displayed on the multi-information display.
Indicates one of the following systems is malfunctioning or disabled.
PKSB (Parking Support Brake)
RCD (Rear Camera Detection) (if equipped)
BSM (Blind Spot Monitor) (if equipped)
RCTA (Rear Crossing Traffic Alert) (if equipped)
Safe Exit Assist (if equipped)
Follow the instructions displayed on the multi-information display.
Warning light Details/Actions
When a buzzer sounds:
Indicates a malfunction in the Lexus parking assist-sensor function
Have the vehicle inspected by any authorized Lexus retailer or
Lexus authorized repairer, or any reliable repairer immediately.
When a buzzer does not sound:
Indicates that the system is temporarily unavailable, possibly due to a
sensor being dirty or covered with ice, etc.
Follow the instructions displayed on the multi-information display.
(P.503)
497
7
7-2. Steps to take in an emergency
When trouble arises
■ Slip indicator
■ Parking brake indicator
■ Brake hold operated indicator (warning buzzer)
■ Warning buzzer
In some cases, the buzzer may not be heard
because of noisy place or an audio sound.
■ Front passenger detection sensor, seat
belt reminder and warning buzzer
● If luggage is placed on the front passen-
ger seat, the front passenger detection
sensor may cause the warning light to
flash and the warning buzzer to sound
even if a passenger is not sitting in the
seat.
● If a cushion is placed on the seat, the sen-
sor may not detect a passenger, and the
warning light may not operate properly.
■ Electric power steering system warning
light (warning buzzer)
When the 12-volt battery charge becomes
insufficient or the voltage temporarily
drops, the electric power steering system
warning light may come on and the warning
buzzer may sound.
■ When the tire pressure warning light
comes on
Inspect the tires to check if a tire is punc-
tured.
Warning light Details/Actions
Indicates a malfunction in:
The VSC system;
The TRC system; or
The hill-start assist control system
The light will flash when the ABS, VSC or TRC system is operating.
Have the vehicle inspected by any authorized Lexus retailer or
Lexus authorized repairer, or any reliable repairer immediately.
Warning light Details/Actions
(Flashes)
Indicates that the parking brake is not fully engaged or released
Operate the parking brake switch once again.
This light comes on when the parking brake is not released. If the light
turns off after the parking brake is fully released, the system is operating
normally.
Indicates a malfunction in the parking brake system
Have the vehicle inspected by any authorized Lexus retailer or
Lexus authorized repairer, or any reliable repairer immediately.
Warning light Details/Actions
(Flashes)
Indicates a malfunction in the brake hold system
Have the vehicle inspected by any authorized Lexus retailer or
Lexus authorized repairer, or any reliable repairer immediately.
498
7-2. Steps to take in an emergency
If a tire is punctured: P.507, 518
If none of the tires are punctured:
Turn the power switch off then turn it to
ON. Check if the tire pressure warning
light comes on or blinks.
If the tire pressure warning light blinks for
approximately 1 minute then stays on
There may be a malfunction in the tire pres-
sure warning system. Have the vehicle
inspected by any authorized Lexus retailer
or Lexus authorized repairer, or any reli-
able repairer immediately.
If the tire pressure warning light comes
on
After the temperature of the tires has low-
ered sufficiently, check the inflation pres-
sure of each tire and adjust them to the
specified level.
If the warning light does not turn off even
after several minutes have elapsed, check
that the inflation pressure of each tire is at
the specified level and perform the tire
inflation pressure setting procedure.
(P.461)
If the warning light does not turn off even
after several minutes have elapsed since
performing the tire inflation pressure set-
ting procedure, have the vehicle inspected
by any authorized Lexus retailer or Lexus
authorized repairer, or any reliable repairer
as soon as possible.
■ The tire pressure warning light may
come on due to natural causes
The tire pressure warning light may come
on due to natural causes such as natural air
leaks and tire inflation pressure changes
caused by temperature. In this case, adjust-
ing the tire inflation pressure will turn off the
warning light (after a few minutes).
■ When a tire is replaced with a spare tire
(vehicles with spare tire)
The compact spare tire is not equipped with
a tire pressure warning valve and transmit-
ter. If a tire goes flat, the tire pressure warn-
ing light will not turn off even though the flat
tire has been replaced with the spare tire.
Replace the spare tire with the repaired tire
and adjust the tire inflation pressure. The
tire pressure warning light will go off after a
few minutes.
■ Conditions that the tire pressure warn-
ing system may not function properly
P.459
WARNING
■ If a warning light comes on or a warn-
ing buzzer sounds when a warning
message is displayed on the multi-
information display
Check and follow the message displayed
on the multi-information display.
Failure to do so may result in death or
serious injury.
■ When the electric power steering
system warning light comes on
When the light comes on yellow, the
assist to the power steering is restricted.
When the light comes on red, the assist
to the power steering is lost and handling
operations of the steering wheel become
extremely heavy. When steering wheel
operations are heavier than usual, grip
the steering wheel firmly and operate it
using more force than usual.
■ If the tire pressure warning light
comes on
Be sure to observe the following precau-
tions. Failure to do so could cause a loss
of vehicle control and result in death or
serious injury.
● Stop your vehicle in a safe place as
soon as possible. Check and adjust the
tire inflation pressure immediately.
499
7
7-2. Steps to take in an emergency
When trouble arises
The warning lights and warning buzzers operate as follows depending on the con-
tent of the message. If a message indicates the need for inspection by a dealer,
have the vehicle inspected by any Authorized lexus retailer or Lexus authorized
repairer, or any reliable repairer immediately.
WARNING
● Vehicles with a spare tire: If the tire
pressure warning light comes on even
after tire inflation pressure adjust-
ment, it is probable that you have a flat
tire. Check the tires. If a tire is flat,
change it with the spare tire and have
the flat tire repaired by the nearest any
authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer
● Vehicles with an emergency tire punc-
ture repair kit: If the tire pressure
warning light comes on even after tire
inflation pressure adjustment, it is
probable that you have a flat tire.
Check the tires. If a tire is flat, repair
the flat tire by using emergency tire
puncture repair kit.
● Avoid abrupt maneuvering and brak-
ing. If the vehicle tires deteriorate, you
could lose control of the steering
wheel or the brakes.
■ If a blowout or sudden air leakage
should occur
The tire pressure warning system may
not activate immediately.
NOTICE
■ To ensure the tire pressure warning
system operates properly
Do not install tires with different specifi-
cations or makers, as the tire pressure
warning system may not operate prop-
erly.
If a warning message is dis-
played
The multi-information display
shows warnings of system malfunc-
tions, incorrectly performed opera-
tions, and messages that indicate a
need for maintenance. When a
message is shown, perform the cor-
rection procedure appropriate to
the message.
If a warning message is displayed
again after the appropriate actions
have been performed, contact any
Authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
Messages and warnings
500
7-2. Steps to take in an emergency
*
: A buzzer sounds the first time a message is shown on the multi-information display.
■ Warning messages
The warning messages explained below
may differ from the actual messages
according to operation conditions and vehi-
cle specifications.
■ Warning buzzer
P.497
■ If a message that indicates the need for
visiting any authorized lexus retailer or
Lexus authorized repairer, or any reli-
able repairer is displayed
The system or part shown on the multi-
information display is malfunctioning. Have
the vehicle inspected by any authorized
lexus retailer or Lexus authorized repairer,
or any reliable repairer immediately.
■ If a message about an operation is
shown
● If a message about an operation of the
accelerator pedal or brake pedal is
shown
• A warning message about an operation
of the brake pedal may be shown while
the driving assist systems such as PCS
(Pre-Collision system) or the dynamic
radar cruise control is operating. If a
warning message is shown, be sure to
decelerate the vehicle or follow an
instruction shown on the multi-informa-
tion display.
• A warning message is shown when Brake
Override System operates. (P.178)
• A warning message is shown when
Drive-Start Control (P.182) operates.
Follow the instructions on the multi-infor-
mation display.
● If a message about an operation of the
power switch is shown
An instruction for operation of the power
switch is shown when the incorrect proce-
dure for starting the hybrid system is per-
formed or the power switch is operated
incorrectly. Follow the instructions shown
on the multi-information display to operate
the power switch again.
● If a message that indicates the need for
the shift lever operation is displayed
To prevent the shift lever from being oper-
ated incorrectly or the vehicle from moving
Warning light
Warning buzzer
*
Warning
Sounds
Indicates an important situation, such as when a
system related to driving is malfunctioning or that
danger may result if the correction procedure is
not performed
Indicates a situation, such as when damage to the
vehicle or danger may result
Comes on or
flashes
Sounds
Indicates an important situation, such as when the
systems shown on the multi-information display
may be malfunctioning
Does not sound
Indicates a condition, such as malfunction of elec-
trical components, their condition, or indicates
the need for maintenance
Indicates a situation, such as when an operation
has been performed incorrectly, or indicates how
to perform an operation correctly
501
7
7-2. Steps to take in an emergency
When trouble arises
unexpectedly, a message that requires
shifting the shift position may be displayed
on the multi-information display.
In that case, follow the instruction of the
message and shift the shift position.
● If a message or image about an
open/close state of a part or replenish-
ment of a consumable is shown
Confirm the part indicated by the multi-
information display or a warning light, and
then perform the coping method such as
closing the open door or replenishing a
consumable.
■ If a message that indicates the need for
referring to Owner’s Manual is dis-
played
● If “Engine Coolant Temp High” is shown,
follow the instructions, accordingly.
(P.539)
● If the following messages are shown,
there may be a malfunction. Immediately
have the vehicle inspected by any autho-
rized lexus retailer or Lexus authorized
repairer, or any reliable repairer.
• “Hybrid System Malfunction”
• “Check Engine”
• “Traction battery system malfunction”
• “Accelerator System Malfunction”
• “Smart Entry & Start System Malfunc-
tion”
• “Shift System Malfunction Apply Parking
Brake Securely When Parking See
Owner’s Manual”
• “P Switch Malfunction Apply Parking
Brake Securely When Parking See
Owner’s Manual”
• “Shift System Unavailable Apply Parking
Brake Securely When Parking See
Owner’s Manual”
• “Shift System Malfunction See Owner’s
Manual”
• “Shift System Malfunction Stop in a Safe
Place See Owner’s Manual”
• “Battery Low Shifting Unavailable See
Owner’s Manual”
● If the following messages are shown,
there may be a malfunction. Immediately
stop the vehicle in a safe place and con-
tact any authorized lexus retailer or
Lexus authorized repairer, or any reliable
repairer. Continuing to drive the vehicle
may be dangerous.
• “Oil pressure low”
• “Braking Power Low”
● If any of the following messages are
shown on the multi-information display,
the vehicle may have run out of fuel. Stop
the vehicle in a safe place and, if the fuel
level is low, refuel the vehicle.
• “Hybrid system stopped”
• “Engine stopped”
● If “Maintenance Required for Traction
Battery Cooling Parts See Owner’s
Manual” is shown, the filter may be
clogged, the air intake vent may be
blocked, or there may be a gap in the
duct. Therefore, perform the following
correction procedure.
• Cleaning the hybrid battery (traction bat-
tery) air intake vent (P.471)
If the warning message is shown even if the
vent is cleaned, have the vehicle inspected
by any authorized lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
● If “12-Volt Battery Charging System Mal-
function Stop in a Safe Place See
Owner’s Manual” is shown
Indicates a malfunction in the vehicle’s
charging system. Pull over and stop the
vehicle as soon as it is safe to do so.
While the message is displayed, the func-
tions of the air conditioning, etc. may be
partially limited in order to reduce the
power consumption of the 12-volt battery.
● If “Low 12-volt Battery See Owner’s
Manual” is displayed
• When the display goes off after several
seconds
*
: Maintain the hybrid system
operation for more than 15 minutes and
charge the 12-volt battery.
• When the display does not go off: Start
up the hybrid system using procedures
for “If the 12-volt battery is discharged”.
(P.533)
502
7-2. Steps to take in an emergency
*
: Displays for about 6 seconds.
■ If “Engine Oil Level Low Add or
Replace” is displayed
The engine oil level may be low. Check the
level of the engine oil, and add engine oil if
necessary. (P.450) This message may
be displayed if the vehicle is stopped on a
slope. Move the vehicle to a level surface
and check if the message disappears.
■ If “Hybrid System Stopped Steering
Power Low” is displayed
This message is displayed if the Hybrid sys-
tem is stopped while driving.
When steering wheel operations are
heavier than usual, grip the steering wheel
firmly and operate it using more force than
usual.
■ If “Shift to P Before Exiting Vehicle” is
displayed
Message is displayed when the driver’s
door is opened without turning the power
switch off with the shift position in any posi-
tion other than P.
■ If “Hybrid System Overheated Output
Power Reduced” is shown
The message may be shown when driving
under severe operating conditions. (For
example, when driving up a long steep hill
or driving up a steep hill in reverse.)
Coping method: P.539
■ If “Traction Battery Needs to be Pro-
tected Refrain from the Use of N Posi-
tion” is shown
This message may be displayed when the
shift position is in N.
As the hybrid battery (traction battery) can
not be charged when the shift position is in
N, shift the shift position to P when the vehi-
cle is stopped.
■ If “Traction Battery Needs to be Pro-
tected Shift into P to Restart” is shown
This message is displayed when the hybrid
battery (traction battery) charge has
become extremely low because the shift
position has been left in N for a certain
amount of time.
When operating the vehicle, shift to P and
restart the hybrid system.
■ If “Shift is in N Release Accelerator
Before Shifting” is shown
Message is displayed when the accelerator
pedal has been depressed and the shift
position is in N. Release the accelerator
pedal and shift the shift position to D or R.
■ If “Press Brake when Vehicle is Stopped
Hybrid System may Overheat” is shown
Message is displayed when the accelerator
pedal is depressed to maintain the vehicle
position when stopped on a upward slope,
etc.
If this continues, the hybrid system may
overheat.
Release the accelerator pedal and depress
the brake pedal.
■ If “Shift System Malfunction Shifting
Unavailable Drive to a Safe Place and
Stop” or “Shift System Malfunction Dri-
ving Unavailable” is displayed
There is a malfunction in the shift control
system. Have the vehicle inspected by any
authorized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer
immediately.
■ If “Auto Power OFF to Conserve Bat-
tery” is shown
Power was turned off due to the automatic
power off function.
Next time when starting the hybrid system,
operate the hybrid system for approxi-
mately 5 minutes to recharge the 12-volt
battery.
■ If “Parking Assist Unavailable Sensor
Blocked” is displayed on the multi-infor-
mation display
A sensor may be covered with water drops,
ice, snow, dirt, etc. Remove the water
drops, ice, snow, dirt, etc., from the sensor
to return the system to normal.
Also, due to ice forming on a sensor at low
temperatures, a warning message may be
displayed or the sensor may not be able to
detect an object. Once the ice melts, the
503
7
7-2. Steps to take in an emergency
When trouble arises
system will return to normal.
If a sensor is dirty, the position of the dirty
sensor will be shown on the display. If an
abnormality is displayed even though there
are no water drops, ice, snow or dirt, the
sensor may be operating abnormally. Have
the vehicle inspected by any authorized
Lexus retailer or Lexus authorized repairer,
or any reliable repairer immediately.
■ If “Parking Assist Unavailable Low Visi-
bility See Owner’s Manual” is displayed
Indicates one of the following systems is dis-
abled.
● RCD (Rear Camera Detection)
● PKSB (Parking Support Brake) (if
equipped)
Remove any dirt or foreign matter from the
rear cameras.
■ If “System Malfunction Visit Your
Dealer” is displayed
Indicates one of the following systems is dis-
abled.
● PCS (Pre-Collision System)
● LDA (Lane Departure Alert)
● LTA (Lane Tracing Assist)
● AHB (Automatic High Beam)
● AHS (Adaptive High beam System) (if
equipped)
● Dynamic radar cruise control
● Speed limitter
● RSA (Road Sign Assist) (if equipped)
● PDA (Proactive Driving Assist) (if
equipped)
● BSM (Blind Spot Monitor) (if
equipped)
● RCTA (Rear Crossing Traffic Alert)
(if equipped)
● Safe Exit Assist (if equipped)
● Automatic Rear Flashing Hazard
Lights (if equipped)
● Secondary Collision Brake (Rear
Impacts while Stopped) (if equipped)
● Rear Vehicle Approaching Indica-
tion (if equipped)
● Lexus parking assist-sensor (if
equipped)
● PKSB (Parking Support Brake) (if
equipped)
● RCD (Rear Camera Detection) (if
equipped)
Have the vehicle inspected by any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer immedi-
ately.
■ If “System Stopped See Owner’s Man-
ual” is displayed
Indicates one of the following systems is dis-
abled.
● PCS (Pre-Collision System)
● LDA (Lane Departure Alert)
● LTA (Lane Tracing Assist)
● AHB (Automatic High Beam)
● AHS (Adaptive High beam System) (if
equipped)
● Dynamic radar cruise control
● Speed limitter
● RSA (Road Sign Assist) (if equipped)
● PDA (Proactive Driving Assist)
● BSM (Blind Spot Monitor) (if
equipped)
● RCTA (Rear Crossing Traffic Alert)
(if equipped)
● Safe Exit Assist (if equipped)
504
7-2. Steps to take in an emergency
● Automatic Rear Flashing Hazard
Lights (if equipped)
● Secondary Collision Brake (Rear
Impacts while Stopped) (if equipped)
● Rear Vehicle Approaching Indica-
tion (if equipped)
● Lexus parking assist-sensor (if
equipped)
● PKSB (Parking Support Brake) (if
equipped)
● RCD (Rear Camera Detection) (if
equipped)
Follow the following correction methods.
• Check the voltage of the 12-volt battery
• Check the sensors that the Lexus Safety
System + uses for foreign matter cover-
ing them. Remove them if any. (P.234)
• Vehicles with RCD: Check if the back
door is open.
• Check the situations in which the sensors
may not operate properly, and improve
the situation if applicable. (P.306, 318,
322, 330, 335)
• Check the sensors including camera sen-
sors for foreign matter covering them.
Remove them if any. (P.319)
• Check if there is any foreign matter
attached to the rear bumper near the
radar sensor and remove it if there is.
(P.303)
• When problems are solved and the sen-
sors are operational, this indication may
disappear by itself.
■ If “System Stopped Front Camera Low
Visibility See Owner’s Manual” is dis-
played
Indicates one of the following systems is dis-
abled.
● PCS (Pre-Collision System)
● LDA (Lane Departure Alert)
● LTA (Lane Tracing Assist)
● AHB (Automatic High Beam)
● AHS (Adaptive High beam System) (if
equipped)
● Dynamic radar cruise control
● Speed limitter
● RSA (Road Sign Assist) (if equipped)
● PDA (Proactive Driving Assist)
Follow the following correction methods.
• Using the windshield wipers, remove the
dirt or foreign matter from the wind-
shield.
• Using the air conditioning system, defog
the windshield.
• Close the hood, remove any stickers, etc.
to clear the obstruction in front of the
front camera.
■ If “System Stopped Front Camera Out
of Temperature Range Wait until Nor-
mal Temperature” is displayed
Indicates one of the following systems is dis-
abled.
● PCS (Pre-Collision System)
● LDA (Lane Departure Alert)
● LTA (Lane Tracing Assist)
● AHB (Automatic High Beam)
● AHS (Adaptive High beam System) (if
equipped)
● Dynamic radar cruise control
● Speed limitter
● RSA (Road Sign Assist) (if equipped)
● PDA (Proactive Driving Assist)
Follow the following correction methods.
• If the front camera is hot, such as after the
vehicle is parked in the sun, use the air
conditioning system to decrease the tem-
perature around the front camera
• If a sunshade was used when the vehicle
was parked, depending on its type, the
sunlight reflected from the surface of the
sunshade may cause the temperature of
the front camera to become excessively
high
• If the front camera is cold, such after the
vehicle is parked in an extremely cold
environment, use the air conditioning
505
7
7-2. Steps to take in an emergency
When trouble arises
system to increase the temperature
around the front camera
■ If “System Stopped Front Radar Sensor
Blocked Clean Radar Sensor” is dis-
played
Indicates one of the following systems is dis-
abled.
● PCS (Pre-Collision System)
● LDA (Lane Departure Alert)
● LTA (Lane Tracing Assist)
● AHB (Automatic High Beam)
● AHS (Adaptive High beam System) (if
equipped)
● Dynamic radar cruise control
● Speed limitter
● PDA (Proactive Driving Assist)
Follow the following correction methods.
• Check if there is any foreign matter
attached to the radar sensor or radar
sensor cover and clean them if necessary
(P.235)
• This message may be displayed when
driving in an open area with few nearby
vehicles or structures, such as a desert,
grasslands, suburbs, etc.
The message may be cleared by driving
the vehicle in an area with structures,
vehicles, etc. nearby.
■ If “System Stopped Front Radar Sensor
Out of Temperature Range Wait until
Normal Temperature” is displayed
Indicates one of the following systems is dis-
abled.
● PCS (Pre-Collision System)
● LDA (Lane Departure Alert)
● LTA (Lane Tracing Assist)
● AHB (Automatic High Beam)
● AHS (Adaptive High beam System) (if
equipped)
● Dynamic radar cruise control
● Speed limitter
● PDA (Proactive Driving Assist)
The temperature of the radar sensor is out-
side of the operating range. Wait for the
temperature to become appropriate.
■ If “System Stopped Front Radar In Self
Calibration See Owner’s Manual” is
displayed
Indicates one of the following systems is dis-
abled.
● PCS (Pre-Collision System)
● LDA (Lane Departure Alert)
● LTA (Lane Tracing Assist)
● AHB (Automatic High Beam)
● AHS (Adaptive High beam System) (if
equipped)
● Dynamic radar cruise control
● Speed limitter
● PDA (Proactive Driving Assist)
Follow the following correction methods.
• Check if there is any foreign matter
attached to the radar sensor or radar
sensor cover and clean them if necessary
(P.235)
• The radar sensor may be misaligned and
will be adjusted automatically while driv-
ing. Continue driving for a while.
■ If “Cruise Control Unavailable See
Owner’s Manual” is displayed
Indicates one of the following systems is dis-
abled.
● Dynamic radar cruise control
● Cruise control
A message is displayed when the driving
assist switch is pushed repeatedly.
Press the driving assist switch quickly and
firmly.
■ If “Speed Limiter Unavailable See
Owner’s Manual” is displayed
This message may be displayed when the
shift position is in R.
Shift the shift position to D.
A message is displayed when the driving
assist switch is pushed repeatedly.
Press the driving assist switch quickly and
506
7-2. Steps to take in an emergency
firmly.
■ If “Driver Monitor Out of Temperature
Range Wait until Normal Temperature”
is displayed
Indicates the following system is disabled.
● Driver monitor
The temperature of the driver monitor cam-
era is outside of the operating range. Wait
for the temperature to become appropri-
ate.
■ If “Driver Monitor Unavailable See
Owner’s Manual” is displayed
The lens of the driver monitor camera may
be dirty.
When there is dirt on the camera lens, clean
it with a dry, soft cloth so as to not damage
it.
■ If “Oil Maintenance Required Soon” is
displayed
Indicates that the engine oil should be
scheduled to be changed.
Check the engine oil and change it if neces-
sary.
After changing the engine oil, make sure to
reset the message. (P.450)
■ If “Oil Maintenance Required” is dis-
played
Indicates that the engine oil should be
changed.
Check and change the engine oil, and oil fil-
ter by any authorized Lexus retailer or
Lexus authorized repairer, or any reliable
repairer. After changing the engine oil,
make sure to reset the message. (P.450)
WARNING
■ If a warning light comes on or a warn-
ing buzzer sounds when a warning
message is shown on the multi-infor-
mation display
P.498
NOTICE
■ If “Maintenance Required For Trac-
tion Battery At Your Dealer” is shown
The hybrid battery (traction battery) is
scheduled to be inspected or replaced.
Have the vehicle inspected by any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer immedi-
ately.
● Continuing to drive the vehicle without
having the hybrid battery (traction bat-
tery) inspected will cause the hybrid
system not to start.
● If the hybrid system does not start,
contact any authorized Lexus retailer
or Lexus authorized repairer, or any
reliable repairer immediately.
■ If “Low 12-volt Battery See Owner’s
Manual” is displayed
The 12-volt battery may have deterio-
rated. As the battery may discharged in
this state when left unattended, have the
battery inspected by any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
507
7
7-2. Steps to take in an emergency
When trouble arises
Stop the vehicle in a safe place on a
hard, flat surface.
Set the parking brake.
Shift the shift lever to P.
Stop the hybrid system.
Turn on the emergency flashers.
Check the degree of the tire dam-
age.
A tire should only be repaired with the
emergency tire puncture repair kit if the
damage is caused by a nail or screw pass-
ing through the tire tread.
• Do not remove the nail or screw from
the tire. Removing the object may widen
the opening and make emergency
repair with the repair kit impossible.
• To avoid sealant leakage, move the vehi-
cle until the area of the puncture, if
known, is positioned at the top of the tire.
■ A flat tire that cannot be repaired with
the emergency tire puncture repair kit
In the following cases, the tire cannot be
repaired with the emergency tire puncture
repair kit. Contact any authorized Lexus
retailer or Lexus authorized repairer, or any
reliable repairer.
● When the tire is damaged due to driving
without sufficient air pressure
● When there are any cracks or damage at
any location on the tire, such as on the
side wall, except the tread
If you have a flat tire (vehi-
cles with emergency tire
puncture repair kit)
Your vehicle is not equipped with a
spare tire, but instead is equipped
with an emergency tire puncture
repair kit.
A puncture caused by a nail or
screw passing through the tire
tread can be repaired temporarily
using the emergency tire puncture
repair kit.
(The kit contains a bottle of sealant.
The sealant can be used only once
to temporarily repair one tire with-
out removing the nail or screw from
the tire.) Depending on the damage
condition of the flat tire, it may not
be able to repaired with the emer-
gency tire puncture repair kit.
After temporarily repairing the tire
with the kit, have the tire repaired
or replaced by any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
WARNING
■ If you have a flat tire
Do not continue driving with a flat tire.
Driving even a short distance with a flat
tire can damage the tire and the wheel
beyond repair, which could result in an
accident.
Before repairing the vehicle
508
7-2. Steps to take in an emergency
● When the tire is visibly separated from
the wheel
● When the cut or damage to the tread is 4
mm (0.16 in.) long or more
● When the wheel is damaged
● When two or more tires have been punc-
tured
● When more than one sharp objects such
as nails or screws have passed through
the tread on a single tire
2WD models
Emergency tire puncture repair kit
Towing eyelet
Location of the emergency tire puncture repair kit
A
B
509
7
7-2. Steps to take in an emergency
When trouble arises
AWD models
Towing eyelet
Emergency tire puncture repair kit
■ Bottle
Sticker
■ Compressor
A
B
Emergency tire puncture repair
kit components
A
510
7-2. Steps to take in an emergency
Air pressure gauge
Compressor switch
Power plug
Hose
Air release cap
■ Emergency tire puncture repair kit
● The sealant stored in the emergency tire
puncture repair kit can be used only once
to temporarily repair a single tire. If the
sealant in the bottle and other parts of the
kit have been used and need to be
replaced, contact any authorized Lexus
retailer or Lexus authorized repairer, or
any reliable repairer.
● The compressor can be used repeatedly.
● The sealant can be used when the outside
temperature is from -30°C (-22°F) to
60°C (140°F).
● The kit is exclusively designed for size
and type of tires originally installed on
your vehicle. Do not use it for tires that a
different size than the original ones, or for
any other purposes.
● If the sealant gets on your clothes, it may
stain.
● If the sealant adheres to a wheel or the
surface of the vehicle body, the stain may
not be removable if it is not cleaned at
once. Immediately wipe away the sealant
with a wet cloth.
● During operation of the repair kit, a loud
operation noise is produced. This does
not indicate a malfunction.
● Do not use to check or to adjust the tire
pressure.
■ Note for checking the emergency tire
puncture repair kit
● Check the sealant expiry date occasion-
ally. The expiry date is shown on the bot-
tle.
● Do not use sealant whose expiry date has
already passed. Otherwise, repairs con-
ducted using the emergency tire punc-
ture repair kit may not be performed
properly.
● The sealant should be replaced before
the expiry date. Contact any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer for
replacement.
A
B
C
D
E
WARNING
■ If you have a flat tire
Driving even a short distance with a flat
tire can damage the tire and the wheel
beyond repair.
Driving with a flat tire may cause a cir-
cumferential groove on the side wall. In
such a case, the tire may explode when
using a repair kit.
■ Caution while driving
● Store the repair kit in the luggage
compartment. Injuries may result in the
event of an accident or sudden brak-
ing.
● The repair kit is exclusively only for
your vehicle. Do not use repair kit on
other vehicles, which could lead to an
accident causing death or serious
injury.
● Do not use repair kit for tires that are
different size than the original ones, or
for any other purpose. If the tires have
not been completely repaired, it could
lead to an accident causing death or
serious injury.
■ Precautions for use of the sealant
● Ingesting the sealant is hazardous to
your health. If you ingest sealant, con-
sume as much water as possible, then
immediately consult a doctor.
● If sealant gets in eyes or adheres to
skin, immediately wash it off with
water. If discomfort persists, consult a
doctor.
511
7
7-2. Steps to take in an emergency
When trouble arises
2WD models
1 Remove the deck board.
2 Take out the emergency tire punc-
ture repair kit.
AWD models
1 Pull the strap upwards to lift up the
deck board and fold it forward.
2 Take out the emergency tire punc-
ture repair kit.
1 Take out the repair kit from the
plastic bag.
Attach the sticker enclosed with the bottle
on the specified locations. (See step
10.)
2 Remove the hose and take out the
power plug from the compressor.
3 Connect the bottle to the compres-
sor.
Insert and connect the bottle straight into
the compressor as shown in the illustration,
and check that the claws of the bottle are
Taking out the emergency tire
puncture repair kit
Emergency repair procedure
512
7-2. Steps to take in an emergency
concealed in the holes.
4 Connect the hose to the bottle.
As shown in the illustration, make sure the
hose is connected securely to the bottle.
5 Remove the valve cap from the
valve of the punctured tire.
6 Extend the hose. Remove the air
release cap from the hose.
You will use the air release cap again.
Therefore keep it in a safe place.
7 Connect the hose to the valve.
Screw the end of the hose clockwise as far
as possible.
513
7
7-2. Steps to take in an emergency
When trouble arises
8 Make sure that the compressor
switch is off.
9 Connect the power plug to the
power outlet socket. (P.420)
Auxiliary tray
Rear
10 Attach the sticker provided with
the tire puncture repair kit to a
position easily seen from the
driver’s seat.
11 Check the specified tire inflation
pressure.
Tire inflation pressure is specified on the
label as shown. (P.554)
Left-hand drive vehicles
Right-hand drive vehicles
12 Start the hybrid system. (P.191)
514
7-2. Steps to take in an emergency
13 To inject the sealant and inflate the
tire, turn the compressor switch on.
14 Inflate the tire until the recom-
mended pressure is reached.
The sealant will be injected and the
pressure will spike to between 300
kPa (3.0 kgf/cm
2
or bar, 44 psi)
and 400 kPa (4.0 kgf/cm
2
or bar,
58 psi), then gradually decrease.
The air pressure gauge will display
the actual tire inflation pressure
about 1 to 5 minutes after the
switch is turned on.
• Turn the compressor switch off and then
check the tire inflation pressure. Being
careful not to over inflate, check and
repeat the inflation procedure until the
specified tire inflation pressure is
reached.
• The tire can be inflated for about 5 to 20
minutes (depending on the outside tem-
perature). If the tire inflation pressure is
still lower than the specified point after
inflation for 25 minutes, the tire is too
damaged to be repaired. Turn the com-
pressor switch off and contact any
authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
• If the tire inflation pressure exceeds the
specified air pressure, let out some air to
adjust the tire inflation pressure.
(P.516)
15 With the compressor switch off,
pull out the power plug from the
power outlet socket and then dis-
connect the hose from the valve on
the tire.
Some sealant may leak when the hose is
removed.
16 Install the valve cap onto the valve
of the emergency repaired tire.
17 Attach the air release cap to the
end of the hose.
If the air release cap is not attached, the
sealant may leak and the vehicle may get
A
B
515
7
7-2. Steps to take in an emergency
When trouble arises
dirty.
18 Temporarily store the bottle in the
luggage compartment while it is
connected to the compressor.
19 To spread the liquid sealant evenly
within the tire, immediately drive
safely for about 5 km (3 miles)
below 80 km/h (50 mph).
20After driving, stop your vehicle in a
safe place on a hard, flat surface
and reconnect the repair kit.
Remove the air release cap from the hose
before reconnecting the hose.
21 Turn the compressor switch on and
wait for several seconds, then turn
it off. Check the tire inflation pres-
sure.
If the tire inflation pressure is under
130 kPa (1.3 kgf/cm
2
or bar, 19
psi): The puncture cannot be
repaired. Contact any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
If the tire inflation pressure is 130
kPa (1.3 kgf/cm
2
or bar, 19 psi) or
higher, but less than the specified
air pressure: Proceed to step
22.
If the tire inflation pressure is the
specified air pressure (P.554):
Proceed to step
23.
22 Turn the compressor switch on to
inflate the tire until the specified air
pressure is reached. Drive for
about 5 km (3 miles) and then per-
form step
20.
23 Attach the air release cap to the
end of the hose.
If the air release cap is not attached, the
sealant may leak and the vehicle may get
A
B
C
516
7-2. Steps to take in an emergency
dirty.
24 Store the bottle in the luggage
compartment while it is connected
to the compressor.
25Taking precautions to avoid sud-
den braking, sudden acceleration
and sharp turns, drive carefully at
under 80 km/h (50 mph) to the
nearest authorized Lexus retailer
or Lexus authorized repairer, or
any reliable repairer that is less than
100 km (62 miles) away for tire
repair or replacement.
For repair and replacement of a tire or dis-
posal of the tire puncture repair kit, contact
any authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
When having the tire repaired or replaced,
make sure to tell any authorized Lexus
retailer or Lexus authorized repairer, or
any reliable repairer that the sealant is
injected.
■ If the tire is inflated to more than the
specified air pressure
1 Disconnect the hose from the valve.
2 Install the air release cap to the end of
the hose and push the protrusion on the
air release cap into the valve to let some
air out.
3 Disconnect the hose from the valve,
remove the air release cap from the
hose and then reconnect the hose.
4 Turn the compressor switch on and wait
for several seconds, then turn it off.
Check that the air pressure indicator
shows the specified air pressure is
reached. (P.554)
If the air pressure is under the desig-
nated pressure, turn the compressor
switch on again and repeat the inflation
procedure until the specified air pres-
sure is reached.
■ After a tire is repaired with the emer-
gency tire puncture repair kit
● The tire pressure warning valve and
transmitter should be replaced.
● Even if the tire inflation pressure is at the
recommended level, the tire pressure
warning light may come on/flash.
WARNING
■ When fixing the flat tire
● Stop your vehicle in a safe and flat
area.
● Do not touch the wheels or the area
around the brakes immediately after
the vehicle has been driven. After the
vehicle has been driven, the wheels
and the area around the brakes may
be extremely hot. Touching these
areas with hands, feet or other body
parts may result in burns.
517
7
7-2. Steps to take in an emergency
When trouble arises
WARNING
● Connect the valve and hose securely
with the tire installed on the vehicle.
If the hose is not properly connected to
the valve, air leakage may occur as seal-
ant may be sprayed out.
● If the hose comes off the valve while
inflating the tire, there is a risk that the
hose will move abruptly due to air
pressure.
● After inflation of the tire has com-
pleted, the sealant may splatter when
the hose is disconnected or some air is
let out of the tire.
● Follow the operation procedure to
repair the tire. If the procedures not
followed, the sealant may spray out.
● Keep back from the tire while it is
being repaired, as there is a chance of
it bursting while the repair operation is
being performed. If you notice any
cracks or deformation of the tire, turn
off the compressor switch and stop the
repair operation immediately.
● The repair kit may overheat if oper-
ated for a long period of time. Do not
operate the compressor continuously
for more than 40 minutes.
● Parts of the repair kit become hot
during operation. Be careful handling
the repair kit during and after opera-
tion. Do not touch the metal part con-
necting the bottle and the compressor.
It will be extremely hot.
● Do not attach the vehicle speed warn-
ing sticker to an area other than the
one indicated. If the sticker is attached
to an area where an SRS airbag is
located, such as the pad of the steering
wheel, it may prevent the SRS airbag
from operating properly.
■ Driving to spread the liquid sealant
evenly
Observe the following precautions to
reduce the risk of accidents.
Failing to do so may result in a loss of
vehicle control and cause death or seri-
ous injury.
● Drive the vehicle carefully at a low
speed. Be especially careful when
turning and cornering.
● If the vehicle does not drive straight or
you feel a pull through the steering
wheel, stop the vehicle and check the
following:
• Tire condition. The tire may have sepa-
rated from the wheel.
• Tire inflation pressure. If the tire infla-
tion pressure is 130 kPa (1.3 kgf/cm
2
or bar, 19 psi) or less, the tire may be
severely damaged.
NOTICE
■ When performing an emergency
repair
● Perform the emergency repair without
removing the nail or screw that has
punctured the tread of the tire. If the
object that has punctured the tire is
removed, repair by the emergency tire
puncture repair kit may not be possi-
ble.
● The repair kit is not waterproof. Make
sure that the repair kit is not exposed
to water, such as when it is being used
in the rain.
● Do not put the repair kit directly onto
dusty ground such as sand at the side
of the road. If the repair kit vacuums up
dust, etc., a malfunction may occur.
● Make sure the sealant bottle of the
repair kit is in a vertical position. The
repair kit does not operate properly
when it is laid.
518
7-2. Steps to take in an emergency
Stop the vehicle in a safe place on a
hard, flat surface.
Set the parking brake.
Shift the shift lever to P.
Stop the hybrid system.
Turn on the emergency flashers.
(P.482)
Vehicles with power back door:
Turn off the power back door func-
tion. (P.148)
NOTICE
■ Precautions for the emergency tire
puncture repair kit
● The repair kit power source should be
12 V DC suitable for vehicle use. Do
not connect the repair kit to any other
source.
● If fuel splatters on the repair kit, the
repair kit may deteriorate. Take care
not to allow fuel to contact it.
● Place the repair kit in a storage to pre-
vent it from being exposed to dirt or
water.
● Store the repair kit in the luggage
compartment out of reach of children.
● Do not disassemble or modify the
repair kit. Do not subject parts such as
the air pressure indicator to impacts.
This may cause a malfunction.
■ To avoid damage to the tire pressure
warning valves and transmitters
When a tire is repaired with liquid seal-
ants, the tire pressure warning valve and
transmitter may not operate properly. If a
liquid sealant is used, contact any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer or other
qualified service shop as soon as possi-
ble. After use of liquid sealant, make sure
to replace the tire pressure warning
valve and transmitter when repairing or
replacing the tire. (P.459)
If you have a flat tire (vehi-
cles with spare tire)
Your vehicle is equipped with a
spare tire. The flat tire can be
replaced with the spare tire.
For details about tires: P.456
WARNING
■ If you have a flat tire
Do not continue driving with a flat tire.
Driving even a short distance with a flat
tire can damage the tire and the wheel
beyond repair, which could result in an
accident.
Before jacking up the vehicle
519
7
7-2. Steps to take in an emergency
When trouble arises
Jack
Towing eyelet
Jack handle
Wheel bolt wrench
Guide pin
Spare tire
Wheel bolt socket
*
*
: They can be purchased at any authorized Lexus retailer or Lexus authorized repairer, or
any reliable repairer.
Location of the spare tire, jack and tools
A
B
C
D
E
F
G
WARNING
■ Using the tire jack
Observe the following precautions.
Improper use of the tire jack may cause
the vehicle to suddenly fall off the jack,
leading to death or serious injury.
● Do not use the tire jack for any pur-
pose other than replacing tires or
installing and removing tire chains.
● Only use the tire jack that comes with
this vehicle for replacing a flat tire.
Do not use it on other vehicles, and do
not use other tire jacks for replacing
tires on this vehicle.
● Put the jack properly in its jack point.
● Do not put any part of your body under
the vehicle while it is supported by the
jack.
520
7-2. Steps to take in an emergency
1 Pull the strap upwards to lift up the
deck board and fold it forward.
2 Remove the Jack.
1 Remove the side deck boards.
(P.418)
2 Remove deck under tray.
3 Loosen the center fastener that
secures the spare tire.
WARNING
● Do not start the hybrid system or drive
the vehicle while the vehicle is sup-
ported by the jack.
● Do not raise the vehicle while some-
one is inside.
● When raising the vehicle, do not put an
object on or under the jack.
● Do not raise the vehicle to a height
greater than that required to replace
the tire.
● Use a jack stand if it is necessary to get
under the vehicle.
● When lowering the vehicle, make sure
that there is no-one near the vehicle. If
there are people nearby, warn them
vocally before lowering.
■ In cases such as when replacing tires,
make sure to turn off the power back
door function (P.148)
Failure to do so may cause the back door
to operate unintentionally if the power
back door switch is accidentally touched,
resulting in hands and fingers being
caught and injured.
Taking out the jack
Taking out the spare tire
521
7
7-2. Steps to take in an emergency
When trouble arises
1 Chock the tires.
2 Using a wheel bolt wrench, slightly
loosen the wheel bolts (approxi-
mately one turn).
3 Turn the tire jack portion by
hand until the notch of the jack is in
contact with the jack point.
The jack point guides are located under
the rocker panel. They indicate the jack
point positions.
4 Install the wheel bolt wrench in jack
handle.
WARNING
■ When storing the spare tire
Be careful not get fingers or other body
parts caught between the spare tire and
the body of the vehicle.
Replacing a flat tire
Flat tire Wheel chock positions
Front left-
hand side
Behind the rear right-hand
side tire
Front right-
hand side
Behind the rear left-hand
side tire
Rear left-
hand side
In front of the front right-
hand side tire
Rear right-
hand side
In front of the front left-
hand side tire
A
522
7-2. Steps to take in an emergency
5 Raise the vehicle until the tire is
slightly raised off the ground.
6 Remove the uppermost wheel bolt
and install the guide pin by
hand.
Turn the guide pin clockwise to tighten it
until it stops.
7 Remove all the wheel bolts and the
tire.
When resting the tire on the ground, place
the tire so that the wheel design faces up to
avoid scratching the wheel surface.
A
WARNING
■ Replacing a flat tire
● Do not touch the disc wheels or the
area around the brakes immediately
after the vehicle has been driven.
After the vehicle has been driven the
disc wheels and the area around the
brakes will be extremely hot. Touching
these areas with hands, feet or other
body parts while changing a tire, etc.,
may result in burns.
● When removing or installing a tire,
make sure to use the guide pin. Also,
the guide pin is made of resin. It may
be damaged if the wheel is placed any-
where other than or if a large
amount of force is applied to the guide
pin.
● Failure to follow these precautions
could cause the wheel bolts to loosen
and the tire to fall off, resulting in death
or serious injury.
A
523
7
7-2. Steps to take in an emergency
When trouble arises
1 Remove any dirt or foreign matter
from the wheel contact surface.
If foreign matter is not removed, the wheel
bolts may loosen while the vehicle is in
motion, and the wheel may come off.
2 Align a wheel bolt hole on the
spare tire with the guide pin, and
set the spare tire on the guide pin.
Align the center hole of the wheel with the
center of the hub and securely set the
spare tire so that the wheel and hub con-
WARNING
• The contact surfaces of the wheel bolt
and wheel are designed specifically to
fit together. When using wheels that
were installed when the vehicle was
shipped from the factory, use special-
ized Lexus genuine wheel bolts. Do
not use wheel bolts designed for other
models, model years or types even if
they are Lexus genuine parts. If the
vehicle does not have wheels that
were installed to the vehicle when it
was shipped from the factory, the fac-
tory-installed wheel bolts may not be
appropriate for the wheel.
Contact either the retailer where the
wheels were purchased or the manu-
facturer of the wheels for proper
installation advice.
• Never apply oil or grease to the wheel
bolts or their contact surface on the
wheel .
Doing so may cause the wheel bolts to
be tightened excessively, leading to
damage to the wheel bolts, the
threaded portion the wheel bolts install
to , or the wheel.
Remove any oil or grease that has
adhered when installing the wheel
bolts.
• After replacing a tire, check the tight-
ening torque as soon as possible.
A
B
• If a wheel bolt hole in a wheel or the
threads of a wheel bolt or the wheel
hub are deformed, cracked, rusty or
otherwise damaged, have the vehicle
inspected by any authorized Lexus
retailer or Lexus authorized repairer,
or any reliable repairer.
● When tightening the wheel bolts, do
not tighten them excessively. Doing so
may cause the wheel bolts, the threads
of the wheel hub, or the wheel to be
damaged.
Installing the spare tire
524
7-2. Steps to take in an emergency
tact surfaces are touching.
3 Loosely tighten each wheel bolt by
hand or using a wheel bolt socket
.
Do not use the wheel bolt socket for any-
thing other than loosely tightening the
wheel bolts by hand.
4 Remove the guide pin and loosely
tighten the wheel bolt as in step
3.
5 Lower the vehicle.
6 Securely tighten the wheel bolts
two or three times in the order
shown in the illustration using a
wheel bolt wrench.
Tightening torque:
140 N•m (14.3 kgf•m, 103 ft•lbf)
7 Stow the flat tire, tire jack and all
tools.
■ The compact spare tire
● The compact spare tire is identified by
the label “TEMPORARY USE ONLY”
on the tire sidewall.
Use the compact spare tire temporarily,
and only in an emergency.
● Make sure to check the tire inflation
pressure of the compact spare tire.
(P.554)
■ When using the compact spare tire
As the compact spare tire is not equipped
with a tire pressure warning valve and
transmitter, low inflation pressure of the
spare tire will not be indicated by the tire
A
525
7
7-2. Steps to take in an emergency
When trouble arises
pressure warning system. Also, if you
replace the compact spare tire after the tire
pressure warning light comes on, the light
remains on.
■ When the compact spare tire is
attached
The vehicle becomes lower when driving
with the compact spare tire compared to
when driving with standard tires.
■ If you have a flat front tire on a road cov-
ered with snow or ice
Install the compact spare tire on one of the
rear wheels of the vehicle. Perform the fol-
lowing steps and fit tire chains to the front
tires:
1 Replace a rear tire with the compact
spare tire.
2 Replace the flat front tire with the tire
removed from the rear of the vehicle.
3 Fit tire chains to the front tires.
WARNING
■ When using the compact spare tire
● Remember that the compact spare tire
provided is specifically designed for
use with your vehicle. Do not use your
compact spare tire on another vehicle.
● Do not use more than one compact
spare tire simultaneously.
● Replace the compact spare tire with a
standard tire as soon as possible.
● Avoid sudden acceleration, abrupt
steering, sudden braking and shifting
operations that cause sudden engine
braking.
■ When the compact spare tire is
attached
The vehicle speed may not be correctly
detected, and the following systems may
not operate correctly:
• ABS & Brake assist
• VSC
• TRC
• Cruise control
• Dynamic radar cruise control
• PCS (Pre-Collision System)
• EPS
• LTA (Lane Tracing Assist) (if
equipped)
• Panoramic view monitor (if equipped)
• Lexus parking assist monitor (if
equipped)
• Navigation system
• PKSB (if equipped)
• AHB (Automatic High Beam) (if
equipped)
• AHS (Adaptive High-beam System) (if
equipped)
• Lexus Teammate Advanced Park (if
equipped)
Also, not only can the following system
not be utilized fully, but it may even nega-
tively affect the drive-train components:
• E-Four (if equipped)
■ Speed limit when using the compact
spare tire
Do not drive at speeds in excess of 80
km/h (50 mph) when a compact spare
tire is installed on the vehicle.
The compact spare tire is not designed
for driving at high speeds. Failure to
observe this precaution may lead to an
accident causing death or serious injury.
■ After using the tools and jack
Before driving, make sure all the tools
and jack are securely in place in their
storage location to reduce the possibility
of personal injury during a collision or
sudden braking.
526
7-2. Steps to take in an emergency
One of the following may be the cause
of the problem:
The electronic key may not be func-
tioning properly. (P.528)
There may not be sufficient fuel in
the vehicle’s tank.
Refuel the vehicle. (P.81)
There may be a malfunction in the
immobilizer system. (P.85)
There may be a malfunction in the
steering lock system. (if equipped)
There may be a malfunction in the
shift control system.
*
(P.193)
The hybrid system may be malfunc-
tioning due to an electrical problem
such as electronic key battery
depletion or a blown fuse. However,
depending on the type of malfunc-
tion, an interim measure is available
to start the hybrid system.
(P.527)
*
: It may not be possible to shift the shift
position from P.
NOTICE
■ Be careful when driving over bumps
with the compact spare tire installed
on the vehicle
The vehicle becomes lower when driving
with the compact spare tire compared to
when driving with standard tires. Be
careful when driving over uneven road
surfaces.
■ Driving with tire chains and the com-
pact spare tire
Do not fit tire chains to the compact
spare tire.
Tire chains may damage the vehicle
body and adversely affect driving perfor-
mance.
■ When replacing the tires
When removing or fitting the wheels,
tires or the tire pressure warning valve
and transmitter, contact any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer as the
tire pressure warning valve and transmit-
ter may be damaged if not handled cor-
rectly.
If the hybrid system will not
start
Reasons for the hybrid system not
starting vary depending on the situ-
ation. Check the following and per-
form the appropriate procedure:
The hybrid system will not start
even though the correct starting
procedure is being followed.
(P.191)
527
7
7-2. Steps to take in an emergency
When trouble arises
One of the following may be the cause
of the problem:
The 12-volt battery may be dis-
charged. (P.533)
The 12-volt battery terminal con-
nections may be loose or corroded.
(P.455)
One of the following may be the cause
of the problem:
The 12-volt battery may be dis-
charged. (P.533)
One or both of the 12-volt battery
terminals may be disconnected.
(P.455)
Contact any authorized Lexus retailer or
Lexus authorized repairer, or any reliable
repairer if the problem cannot be repaired,
or if repair procedures are unknown.
When the hybrid system does not start,
the following steps can be used as an
interim measure to start the hybrid sys-
tem if the power switch is functioning
normally.
Do not use this starting procedure
except in cases of emergency.
1 Pull the parking brake switch to
check that the parking brake is set.
(P.205)
Parking brake indicator will come on.
2 Turn the power switch to ACC.
*1, 2
3 Press and hold the power switch for
about 15 seconds while depressing
the brake pedal firmly.
Even if the hybrid system can be
started using the above steps, the sys-
tem may be malfunctioning. Have the
vehicle inspected by any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
*1
: ACC mode can be enabled/disabled
on the customize menu. (P.570)
*2
: When ACC is disabled, turn the power
switch to ON then OFF, and perform
the following step within 5 seconds.
The interior lights and head-
lights are dim, or the horn does
not sound or sounds at a low vol-
ume.
The interior lights and head-
lights do not turn on, or the horn
does not sound.
Emergency start function
528
7-2. Steps to take in an emergency
■ When the electronic key does not work
properly
● Make sure that the smart entry & start
system has not been deactivated in the
customization setting. If it is off, turn the
function on. (Customizable features:
P.560)
● Check if battery-saving mode is set. If it is
set, cancel the function. (P.150)
● The electronic key function may be sus-
pended. (P.151)
Use the mechanical key (P.130) in
order to perform the following opera-
tions.
If you lose your keys
New genuine mechanical keys can
be made by any authorized Lexus
retailer or Lexus authorized
repairer, or any reliable repairer
using the other mechanical key and
the key number stamped on your
key number plate. Keep the plate in
a safe place such as your wallet, not
in the vehicle.
NOTICE
■ When an electronic key is lost
If the electronic key remains lost, the risk
of vehicle theft increases significantly.
Visit any authorized Lexus retailer or
Lexus authorized repairer, or any reli-
able repairer immediately with all
remaining electronic keys that were pro-
vided with your vehicle.
If the electronic key does not
operate properly
If communication between the
electronic key and vehicle is inter-
rupted (P.151) or the electronic
key cannot be used because the
battery is depleted, the smart entry
& start system and wireless remote
control cannot be used. In such
cases, the doors can be opened and
the hybrid system can be started by
following the procedure below.
NOTICE
■ In case of a smart entry & start system
malfunction, or other key related
problems
Take your vehicle with all the electronic
keys provided with your vehicle to any
authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
Locking and unlocking the doors
529
7
7-2. Steps to take in an emergency
When trouble arises
1 Insert a plastic card, etc. into the
gap in the door handle to pry up the
cover.
To avoid damage, do not apply excessive
force to the cover.
2 Remove the cover by pressing it on
the rear.
3 Use the mechanical key in order to
perform the following operations:
1 Locks all the doors
2 Unlocks all the doors
■ Key linked functions
1 Closes the windows (turn and hold)
*
2 Opens the windows (turn and hold)
*
*
: These settings must be customized at any
authorized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer.
1 Ensure that the shift position is in P
and depress the brake pedal.
2 Touch the Lexus emblem side of
the electronic key to the power
switch.
When the electronic key is detected, a
buzzer sounds and the power switch will
turn to ON.
When the smart entry & start system is
deactivated in customization setting and
ACC customization is in on, the power
WARNING
■ When using the mechanical key and
operating the power windows
Operate the power window after check-
ing to make sure that there is no possibil-
ity of any passenger having any of their
body parts caught in the window. Also,
do not allow children to operate the
mechanical key. It is possible for children
and other passengers to get caught in
the power window.
Starting the hybrid system
530
7-2. Steps to take in an emergency
switch will turn to ACC.
3 Firmly depress the brake pedal and
check that and a message
are shown on the multi-information
display.
4 Press the power switch shortly and
firmly.
In the event that the hybrid system still
cannot be started, contact any autho-
rized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer.
■ Stopping the hybrid system
Set the parking brake, shift the shift position
to P and press the power switch as you nor-
mally do when stopping the hybrid system.
■ Replacing the key battery
As the above procedure is a temporary
measure, it is recommended that the elec-
tronic key battery be replaced immediately
when the battery is depleted. (P.474)
■ Alarm (if equipped)
Using the mechanical key to lock the doors
will not set the alarm system.
If a door is unlocked using the mechanical
key when the alarm system is set, the alarm
may be triggered. (P.87)
■ Changing power switch modes
Release the brake pedal and press the
power switch in step
3 above.
The hybrid system does not start and modes
will be changed each time the switch is
pressed. (P.194)
531
7
7-2. Steps to take in an emergency
When trouble arises
■ Opening a door using the manual
release handle from outside the
vehicle
Pull the manual release handle to
open the door.
Normally, the manual release handles can-
not be used to open the doors.
To open a door, enable manual release
handle operation. (P.532)
■ Opening a door using the manual
release handle from inside the
vehicle
Pull the manual release handle
twice to open the door.
Pulling the handle once will enable opera-
tion. Pulling the handle again will open the
door.
■ Manual release handle operating con-
ditions
● When the vehicle is involved in a collision
The manual release handle may not
become operable depending on the force
of the impact and conditions of the collision.
● When the 12-volt battery voltage drops
slowly while a door was unlocked
It may not work depending on how it is low-
ered.
● When manual release handle operation
is enabled from inside the vehicle
● When manual release handle operation
is enabled from outside the vehicle using
the mechanical key
If a door cannot be opened
using the door opener switch
If a door cannot be opened using
the door opener switch, it can be
opened using a manual release
handle.
NOTICE
■ Operating a manual release handle
Normally, the manual release handles
cannot be used to open the doors. To
enable manual release handle operation,
perform the following. If the following is
not performed and/or a manual release
handle is operated with force, it may
deform or be damaged.
Opening a door using the man-
ual release handle
A
A
532
7-2. Steps to take in an emergency
■ Enabling outside manual release handle
operation using the mechanical key
Operation of a manual release handle can
be enabled by unlocking a door with the
mechanical key.
1 Insert a plastic card, etc. into the gap in
the door handle to pry up the cover.
To avoid damage, do not apply excessive
force to the cover.
2 Remove the cover by pressing it on the
rear.
3 Using the mechanical key, turn the lock
cylinder to the unlock side to enable the
manual release handle operation.
The mechanical key can only be inserted in
one direction, as the key only has a groove
on one side.
If the key cannot be inserted in a lock cylin-
der, turn it over and re-attempt to insert it.
■ Conditions which manual release han-
dle operation is disabled
● Normally, operation of the outside man-
ual release handles is disabled, and they
cannot be used to open the doors.
When operation is enabled by operating a
manual release handle or using a mechani-
cal key, operation will be disabled automati-
cally if the door is opened using the door
opener switch or locked.
● Operation of the inside manual release
handles is disabled when the power
switch is in ON, and they cannot be used
to open the doors.
When operation is enabled by operating a
manual release handle or using a mechani-
cal key, operation will be disabled automati-
cally if the door is opened using the door
opener switch or locked.
● To prevent a door from being opened
accidentally, when the power switch is in
ON, after an inside manual release han-
dle is operated once, operation will auto-
matically be disabled after approximately
1 second.
533
7
7-2. Steps to take in an emergency
When trouble arises
If you have a set of jumper (or booster)
cables and a second vehicle with a 12-
volt battery, you can jump start your
vehicle by following the steps below.
1 Confirm that the electronic key is
being carried.
When connecting the jumper (or booster)
cables, depending on the situation, the
alarm may activate and the doors may
lock. (P.88)
2 Open the hood (P.445) and
fuse box cover.
3 Open the exclusive jump starting
terminal cover.
4 Connect a positive jumper cable clamp to on your vehicle and connect the
clamp on the other end of the positive cable to on the second vehicle. Then,
connect a negative cable clamp to on the second vehicle and connect the
clamp at the other end of the negative cable to .
If the 12-volt battery is dis-
charged
The following procedures may be
used to start the hybrid system if the
vehicle’s 12-volt battery is dis-
charged.
You can also call any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
Restarting the hybrid system
A
B
C
D
534
7-2. Steps to take in an emergency
Use jumper cables that can reach the specified terminals and connecting point.
Exclusive jump starting terminal (your vehicle)
Positive (+) battery terminal (second vehicle)
Negative (-) battery terminal (second vehicle)
Metallic point shown in the illustration
5 Start the engine of the second vehi-
cle. Increase the engine speed
slightly and maintain at that level for
approximately 5 minutes to
recharge the 12-volt battery of your
vehicle.
6 Vehicles with steering lock system:
Open and close any of the doors of
your vehicle with the power switch
OFF.
7 Maintain the engine speed of the
second vehicle and start the hybrid
system of your vehicle by turning
the power switch to ON.
8 Make sure the “READY” indicator
comes on. If the indicator light does
not come on, contact any autho-
rized Lexus retailer or Lexus autho-
rized repairer, or any reliable
repairer.
9 Once the hybrid system has
started, remove the jumper cables
in the exact reverse order from
which they were connected.
10 Close the exclusive jump starting
terminal cover, and reinstall the
fuse box cover to its original posi-
tion.
Once the hybrid system starts, have
the vehicle inspected at any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer as
soon as possible.
■ Starting the hybrid system when the 12-
volt battery is discharged
The hybrid system cannot be started by
A
B
C
D
535
7
7-2. Steps to take in an emergency
When trouble arises
push-starting.
■ If the doors cannot be unlocked using
the smart entry & start system or wire-
less remote control
The doors can be opened by enabling its
respective manual release handle opera-
tion. (P.532)
■ Locking the doors after the 12-volt bat-
tery was discharged
The doors cannot be locked using the smart
entry & start system or wireless remote
control.
By locking the door using the mechanical
key, the operation of the manual release
handle can be disabled.
Driver’s door
1 Insert a plastic card, etc. into the gap in
the door handle to pry up the cover.
To avoid damage, do not apply excessive
force to the cover.
2 Remove the cover by pressing it on the
rear.
3 Using the mechanical key, turn the lock
cylinder to the lock side to lock the
door.
4 Check that the door cannot be opened.
Doors other than the driver’s door
1 Open the door. Using the mechanical
key, slide the cover in the direction
shown in the illustration.
To avoid damage, do not apply excessive
force to the cover.
2 Insert the mechanical key into the open-
ing.
3 Remove the mechanical key and slide
the cover back to its original position.
4 Check that all of the doors cannot be
opened.
536
7-2. Steps to take in an emergency
■ To prevent 12-volt battery discharge
● Turn off the headlights and the air condi-
tioning system while the hybrid system is
stopped.
● Turn off any unnecessary electrical com-
ponents when the vehicle is running at a
low speed for an extended period, such
as in heavy traffic.
● When ACC customization is in off,
power is still provided to the multimedia
system even though the power switch is
off.
To turn off the multimedia system, use the
multimedia system power switch. For
details, refer to the Multimedia Owner’s
Manual.
■ When the 12-volt battery is removed or
discharged
● Information stored in the ECU is cleared.
When the 12-volt battery is depleted,
have the vehicle inspected at any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
● Some systems may require initialization.
(P.572)
■ When removing the 12-volt battery ter-
minals
● When the 12-volt battery terminals are
removed, the information stored in the
ECU is cleared. Before removing the 12-
volt battery terminals, contact any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer as soon
as possible.
● If a 12-volt battery terminal is discon-
nected, the doors will not be able to be
opened using the door opener switches
and the electronic key may become
trapped in the vehicle.
To prevent the electronic key (mechanical
key) from being locked inside the vehicle,
make sure to remove it from the vehicle
before disconnecting a 12-volt battery ter-
minal.
● If the electronic key (mechanical key) is
to be left in the vehicle, make sure to
open a window so an inside manual
release handle can be operated.
■ Charging the 12-volt battery
The electricity stored in the 12-volt battery
will discharge gradually even when the
vehicle is not in use, due to natural dis-
charge and the draining effects of certain
electrical appliances. If the vehicle is left for
a long time, the 12-volt battery may dis-
charge, and the hybrid system may be
unable to start. (The 12-volt battery
recharges automatically during driving.)
■ When recharging or replacing the 12-
volt battery
● In some cases, it may not be possible to
unlock the doors using the smart entry &
start system when the 12-volt battery is
discharged. Use the wireless remote
control or the mechanical key to lock or
unlock the doors.
● The hybrid system may not start on the
first attempt after the 12-volt battery has
recharged but will start normally after the
second attempt. This is not a malfunction.
● The power switch mode is memorized by
the vehicle. When the 12-volt battery is
reconnected, the system will return to the
mode it was in before the 12-volt battery
was discharged. Before disconnecting
the 12-volt battery, turn the power switch
537
7
7-2. Steps to take in an emergency
When trouble arises
off.
If you are unsure what mode the power
switch was in before the 12-volt battery
discharged, be especially careful when
reconnecting the 12-volt battery.
● If the 12-volt battery discharges, it may
not be possible to shift the shift position to
other positions. In this case, the vehicle
cannot be towed without lifting both front
wheels because the front wheels will be
locked.
● Some systems may require initialization.
(P.556)
■ When replacing the 12-volt battery
● Use a Central Degassing type 12-volt
battery (European Regulations).
● Use a 12-volt battery that the case size is
same as the previous one (LN0), 20
hour rate capacity (20HR) is equivalent
(39Ah) or greater, and performance rat-
ing (CCA) is equivalent (240A)or
greater.
• If the sizes differ, the 12-volt battery can-
not be properly secured.
• If an improper 12-volt battery is used, 12-
volt battery performance may decrease
and the hybrid system may not be able to
restart.
• If the 20 hour rate capacity is low, even if
the time period where the vehicle is not
used is a short time, the 12-volt battery
may discharge and hybrid system may
not be able to start.
● Use a ventilation type calcium battery.
● Use a 12-volt battery with a handle. If a
12-volt battery without a handle is used,
removal is more difficult.
● After exchanging, firmly attach the fol-
lowing items to the exhaust hole of the
12-volt battery.
• Use the exhaust hose that was attached
to the 12-volt battery before replacing
and confirm that it is firmly connected to
the hole section of the vehicle.
• Use the exhaust hole plug included with
the 12-volt battery replaced or the one
installed on the 12-volt battery prior to
the replacement. (Depending on the 12-
volt battery to be replaced, the exhaust
hole may be plugged.)
Exhaust hole
Exhaust hose
Hole section of the vehicle
For details, consult with at any authorized
Lexus retailer or Lexus authorized repairer,
or any reliable repairer as soon as possible.
WARNING
■ When removing the 12-volt battery
terminals
Always remove the negative (-) terminal
first. If the positive (+) terminal contacts
any metal in the surrounding area when
the positive (+) terminal is removed, a
spark may occur, leading to a fire in addi-
tion to electrical shocks and death or
serious injury.
■ Avoiding 12-volt battery fires or
explosions
Observe the following precautions to
prevent accidentally igniting the flamma-
ble gas that may be emitted from the 12-
volt battery:
● Make sure each jumper cable is con-
nected to the correct terminal and that
it is not unintentionally in contact with
any other than the intended terminal.
● Do not allow the other end of the
jumper cable connected to the “+” ter-
minal to come into contact with any
other parts or metal surfaces in the
area, such as brackets or unpainted
metal.
A
B
C
538
7-2. Steps to take in an emergency
WARNING
● Do not allow the + and - clamps of the
jumper cables to come into contact
with each other.
● Do not smoke, use matches, cigarette
lighters or allow open flame near the
12-volt battery.
■ 12-volt battery precautions
The 12-volt battery contains poisonous
and corrosive acidic electrolyte, while
related parts contain lead and lead com-
pounds. Observe the following precau-
tions when handling the 12-volt battery:
● When working with the 12-volt battery,
always wear safety glasses and take
care not to allow any 12-volt battery
fluids (acid) to come into contact with
skin, clothing or the vehicle body.
● Do not lean over the 12-volt battery.
● In the event that 12-volt battery fluid
(acid) comes into contact with the skin
or eyes, immediately wash the affected
area with water and seek medical
attention.
Place a wet sponge or cloth over the
affected area until medical attention
can be received.
● Always wash your hands after han-
dling the 12-volt battery and other bat-
tery-related parts.
● Do not allow children near the 12-volt
battery.
■ After recharging the 12-volt battery
Have the 12-volt battery inspected at any
authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer as soon as possible.
If the 12-volt battery is deteriorating, con-
tinued use may cause the 12-volt battery
to emit a malodorous gas, which may be
detrimental to the health of passengers.
■ When replacing the 12-volt battery
● For information regarding 12-volt bat-
tery replacement, contact any autho-
rized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
● After replacing, securely attach the
exhaust hose and exhaust hole plug to
the exhaust hole of the replaced 12-
volt battery. If not properly installed,
gases (hydrogen) may leak into the
vehicle interior, and there is the possi-
ble danger of the gas igniting and
exploding.
NOTICE
■ When handling jumper cables
When connecting the jumper cables,
ensure that they do not become entan-
gled in the cooling fans or belt.
■ When connecting jumper cables
Make sure to connect jumper cables to
the specified terminals and connecting
point. Failure to do so may adversely
affect the electronic devices or damage
to them.
539
7
7-2. Steps to take in an emergency
When trouble arises
If the engine coolant temperature
gauge enters the red zone or
“Engine Coolant Temp High Stop in
a Safe Place See Owner’s Manual”
is shown on the multi-information
display
1 Stop the vehicle in a safe place and
turn off the air conditioning system,
and then stop the hybrid system.
2 If you see steam:
Carefully lift the hood after the
steam subsides.
If you do not see steam:
Carefully lift the hood.
3 After the hybrid system has cooled
down sufficiently, inspect the hoses
NOTICE
■ To prevent damaging the vehicle
The exclusive jump starting terminal is to
be used when charging the 12-volt bat-
tery from another vehicle in an emer-
gency. It cannot be used to jump start
another vehicle.
If your vehicle overheats
The following may indicate that
your vehicle is overheating.
The engine coolant temperature
gauge (P.97, 103) enters the
red zone, or a loss of hybrid sys-
tem power is experienced. (For
example, the vehicle speed does
not increase.)
“Engine Coolant Temp High Stop
in a Safe Place See Owner’s
Manual” or “Hybrid System
Overheated Reduced Output
Power” is shown on the multi-
information display.
Steam comes out from under the
hood.
Correction procedures
540
7-2. Steps to take in an emergency
and radiator core (radiator) for any
leaks.
Radiator
Cooling fans
If a large amount of coolant leaks, immedi-
ately contact any authorized Lexus retailer
or Lexus authorized repairer, or any reli-
able repairer.
4 The coolant level is satisfactory if it
is between the “F” and “L” lines on
the reservoir.
Reservoir
“F” line
“L” line
Radiator cap
5 Add coolant if necessary.
Water can be used in an emergency if
coolant is unavailable.
6 Start the hybrid system and turn the
air conditioning system on to check
that the radiator cooling fans oper-
ate and to check for coolant leaks
from the radiator or hoses.
The fans operate when the air conditioning
system is turned on immediately after a
cold start. Confirm that the fans are oper-
ating by checking the fan sound and air
flow. If it is difficult to check these, turn the
air conditioning system on and off repeat-
edly. (The fans may not operate in freezing
temperatures.)
7 If the fans are not operating:
Stop the hybrid system immediately
and contact any authorized Lexus
retailer or Lexus authorized
repairer, or any reliable repairer.
If the fans are operating:
Have the vehicle inspected at the
nearest any authorized Lexus
retailer or Lexus authorized
repairer, or any reliable repairer.
8 Check if “Engine Coolant Temp
High Stop in a Safe Place See
Owner’s Manual” is shown on the
multi-information display.
If the message does not disappear:
Stop the hybrid system and contact
any authorized Lexus retailer or
Lexus authorized repairer, or any
A
B
A
B
C
D
541
7
7-2. Steps to take in an emergency
When trouble arises
reliable repairer.
If the message is not displayed:
Have the vehicle inspected at the
nearest authorized Lexus retailer
or Lexus authorized repairer, or
any reliable repairer.
If “Hybrid System Overheated
Reduced Output Power” is shown
on the multi-information display
1 Stop the vehicle in a safe place.
2 Stop the hybrid system and care-
fully lift the hood.
3 After the hybrid system has cooled
down, inspect the hoses and radia-
tor core (radiator) for any leaks.
Radiator
Cooling fans
If a large amount of coolant leaks, immedi-
ately contact any authorized Lexus retailer
or Lexus authorized repairer, or any reli-
able repairer.
4 The coolant level is satisfactory if it
is between the “F” and “L” lines on
the reservoir.
Reservoir
“F” line
“L” line
5 Add coolant if necessary.
Water can be used in an emergency if
coolant is unavailable.
If water has been added in an emergency,
have the vehicle inspected at the nearest
authorized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer as
soon as possible.
6 After stopping the hybrid system
and waiting for 5 minutes or more,
start the hybrid system again and
check if “Hybrid System Over-
heated Reduced Output Power” is
shown on the multi-information dis-
play.
A
B
A
B
C
542
7-2. Steps to take in an emergency
If the message does not disappear:
Stop the hybrid system and contact any
authorized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer.
If the message is not displayed:
The hybrid system temperature has
dropped and the vehicle may be driven
normally.
However, if the message appears again
frequently, contact any authorized Lexus
retailer or Lexus authorized repairer, or
any reliable repairer.
WARNING
■ To prevent an accident or injury when
inspecting under the hood of your
vehicle
Observe the following precautions.
Failure to do so may result in serious
injury such as burns.
● If steam is seen coming from under the
hood, do not open the hood until the
steam has subsided. The engine com-
partment may be very hot.
● After the hybrid system has been
turned off, check that the “READY”
indicator is off. When the hybrid sys-
tem is operating, the gasoline engine
may automatically start, or the cooling
fans may suddenly operate even if the
gasoline engine stops. Do not touch or
approach rotating parts such as the
fans, which may lead to fingers or
clothing (especially a tie, a scarf or a
muffler) getting caught, resulting in
serious injury.
● Do not loosen the radiator cap or the
coolant reservoir cap while the hybrid
system and radiator are hot.
High temperature steam or coolant
could spray out.
NOTICE
■ When adding engine/power control
unit coolant
Add coolant slowly after the hybrid sys-
tem has cooled down sufficiently. Adding
cool coolant to a hot hybrid system too
quickly can cause damage to the hybrid
system.
■ To prevent damage to the cooling
system
Observe the following precautions:
● Avoid contaminating the coolant with
foreign matter (such as sand or dust,
etc.).
● Do not use any coolant additive.
543
7
7-2. Steps to take in an emergency
When trouble arises
1 Stop the hybrid system. Shift the
shift position to P and set the park-
ing brake.
2 Remove the mud, snow or sand
from around the front wheels.
3 Place wood, stones or some other
material under the front wheels to
help provide traction.
4 Restart the hybrid system.
5 Shift the shift position to D or R and
release the parking brake. Then,
while exercising caution, depress
the accelerator pedal.
■ When it is difficult to free the vehicle
Press the switch to turn off TRC.
(P.385)
If the vehicle becomes stuck
Carry out the following procedures
if the tires spin or the vehicle
becomes stuck in mud, dirt or snow:
Recovering procedure
WARNING
■ When attempting to free a stuck vehi-
cle
If you choose to push the vehicle back
and forth to free it, make sure the sur-
rounding area is clear to avoid striking
other vehicles, objects or people. The
vehicle may also lunge forward or lunge
back suddenly as it becomes free. Use
extreme caution.
■ When shifting the shift position
Be careful not to shift the shift position
with the accelerator pedal depressed.
This may lead to unexpected rapid accel-
eration of the vehicle that may cause an
accident resulting in death or serious
injury.
NOTICE
■ To avoid damage to the hybrid trans-
mission and other components
● Avoid spinning the tires and depress-
ing the accelerator pedal more than
necessary.
● If the vehicle remains stuck even after
these procedures are performed, the
vehicle may require towing to be
freed.

Related Topics

Popular Owner Manuals