2019-2026 Lexus UX SUV Do-it-yourself maintenance -> Light bulbs User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Do-it-yourself maintenance -> Light bulbs for Your Lexus UX SUV First Generation (2019-2026)

398
6-3. Do-it-yourself maintenance
Front turn signal light (vehicles with
single-beam headlights)
■ Bulbs that need to be replaced by
your Lexus dealer
Headlights
Parking lights and daytime running
lights
Front turn signal lights (vehicles with
triple-beam headlights)
Fog lights (if equipped)
Cornering lights (if equipped)
Side turn signal lights
Tail lights
Stop lights
Tail lights/stop lights
Rear turn signal lights
Back-up lights
High mounted stoplight
License plate lights
Side marker lights
■ LED lights
Vehicles with single-beam headlights:
The lights other than the front turn signal
light each consist of a number of LEDs. If
any of the LEDs burn out, take your vehicle
to your Lexus dealer to have the light
replaced.
Vehicles with triple-beam headlights:
The lights consist of a number of LEDs. If
any of the LEDs burn out, take your vehicle
to your Lexus dealer to have the light
replaced.
■ Condensation build-up on the inside of
the lens
Temporary condensation build-up on the
inside of the headlight lens does not indi-
cate a malfunction. Contact your Lexus
dealer for more information in the following
situations:
● Large drops of water have built up on the
inside of the lens.
● Water has built up inside the headlight.
■ When replacing light bulbs
P.395
Light bulbs
You may replace the following bulb
by yourself. Before replacing,
check the wattage of the light bulb
to be replaced. As there is a danger
that components may be damaged,
we recommend that replacement is
carried out by your Lexus dealer.
Bulb location
A
399
6-3. Do-it-yourself maintenance
6
Maintenance and care
■ Front turn signal lights (vehicles
with single-beam headlights)
1
Turn the bulb base counterclock-
wise.
2
Remove the light bulb.
3
When installing, reverse the steps
listed.
Replacing light bulb
WARNING
■ Replacing light bulb
● Turn off the light. Do not attempt to
replace the bulb immediately after
turning off the light.
The bulb become very hot and may
cause burns.
● Do not touch the glass portion of the
light bulb with bare hands. When it is
unavoidable to hold the glass portion,
use and hold with a clean dry cloth to
avoid getting moisture and oils on the
bulb.
Also, if the bulb is scratched or
dropped, it may blow out or crack.
● Fully install light bulb and any parts
used to secure it. Failure to do so may
result in heat damage, fire, or water
entering the light unit. This may dam-
age the light or cause condensation to
build up on the lens.
■ To prevent damage or fire
● Make sure bulb is fully seated and
locked.
● Check the wattage of the bulb before
installing to prevent heat damage.

Related Topics

Popular Owner Manuals