2019-2026 Lexus UX SUV Instrument cluster User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instrument cluster for Your Lexus UX SUV First Generation (2019-2026)

78
2-1. Instrument cluster
2-1.Instrument cluster
Vehicles with 7-inch display
Vehicles with 12.3-inch display (Type 1)
Warning lights and indicators
The warning lights and indicators on the instrument cluster, center panel and
outside rear view mirrors inform the driver of the status of the vehicle’s vari-
ous systems.
Instrument cluster
79
2-1. Instrument cluster
2
Vehicle status information and indicators
Vehicles with 12.3-inch display (Type 2)
Vehicles with 12.3-inch display (Type 3)
The location of some displayed items and the units of measure may differ depend-
ing on the intended destination of the vehicle.
Warning lights inform the driver of
malfunctions in the indicated vehicle’s
systems.
Warning lights
(U.S.A.)
Brake system warning light
*1
(P.410)
(red)
(Canada)
Brake system warning light
*1
(P.410)
Charging system warning
light
*2
(P.410)
80
2-1. Instrument cluster
*1
: These lights come on when the power
switch is turned to ON to indicate that a
system check is being performed. They
will go off after the hybrid system is on,
or after a few seconds. There may be a
malfunction in a system if the lights do
not come on, or go off. Have the vehicle
Low engine oil pressure warn-
ing light
*2
(P.410)
(U.S.A.)
Malfunction indicator lamp
*1
(P.411)
(Canada)
Malfunction indicator lamp
*1
(P.411)
High coolant temperature
warning light
*2
(P.411)
Tire pressure warning light
*1
(P.411)
(yellow)
Brake system warning light
*1
(P.412)
SRS warning light
*1
(P.412)
(U.S.A.)
ABS warning light
*1
(P.412)
(Canada)
ABS warning light
*1
(P.412)
(red)
Electric power steering system
warning light
*1
(P.412)
(yellow)
Electric power steering system
warning light
*1
(P.412)
Slip indicator
*1
(P.413)
(Flashes)
(U.S.A.)
Parking brake indicator
(P.413)
(Flashes)
(Canada)
Parking brake indicator
(P.413)
(Flashes)
Brake hold operated indica-
tor
*1
(P.413)
Intuitive parking assist OFF indi-
cator
*1
(P.413)
Low fuel level warning light
(P.414)
Driver’s and front passenger’s
seat belt reminder light
(P.414)
Rear passengers’ seat belt
reminder lights
*3
(P.414)
Rear passengers’ seat belt
reminder lights
*4
(P.414)
Inappropriate pedal operation
warning light
*2
(P.415)
PCS warning light
*1
(P.415)
(Yellow)
LTA indicator (P.415)
(Yellow)
LDA indicator (P.415)
(Yellow)
PDA indicator (P.415)
(Yellow)
Cruise control indicator
(P.416)
(Yellow)
Dynamic radar cruise control
indicator (P.416)
(Yellow)
Driving assist information indi-
cator
*1
(P.416)
Hybrid system overheat warn-
ing light
*2
(P.416)
81
2-1. Instrument cluster
2
Vehicle status information and indicators
inspected by your Lexus dealer.
*2
: This light illuminates on the multi-infor-
mation display with a message.
*3
: Vehicles with 7-inch display
*4
: Vehicles with 12.3-inch display
The indicators inform the driver of the
operating state of the vehicle’s various
systems.
WARNING
■ If a safety system warning light does
not come on
Should a safety system light such as the
ABS and SRS warning light not come on
when you start the hybrid system, this
could mean that these systems are not
available to help protect you in an acci-
dent, which could result in death or seri-
ous injury. Have the vehicle inspected by
your Lexus dealer immediately if this
occurs.
Indicators
Turn signal indicator (P.191)
(U.S.A.)
Headlight indicator (P.198)
(Canada)
Tail light indicator (P.198)
Headlight high beam indicator
(P.200)
AHB indicator
*1
(P.201)
Fog light indicator (if equipped)
(P.204)
PCS warning light
*1, 2
(P.221)
(White)
LTA indicator (P.234)
(Green)
LTA indicator (P.234)
(Yellow)
(Flashes)
LTA indicator (P.234)
(White)
LDA indicator (P.238)
(Green)
LDA indicator (P.238)
(Yellow)
(Flashes)
LDA indicator (P.238)
LDA OFF indicator
*2
(if
equipped) (P.238)
(White)
PDA indicator (P.245)
(Green)
PDA indicator (P.245)
(Green)
Cruise control indicator
(P.261)
(White)
Cruise control indicator
(P.261)
(Green)
Dynamic radar cruise control
indicator (P.256)
(White)
Dynamic radar cruise control
indicator (P.256)
Driving assist information indi-
cator
*1, 2
(P.264, 269, 278)
Outside rear view mirror indi-
cators
*3
(P.264, 269, 278)
Intuitive parking assist OFF indi-
cator
*1, 2
(P.273)
82
2-1. Instrument cluster
*1
: These lights come on when the power
switch is turned to ON to indicate that a
system check is being performed. They
will go off after the hybrid system is on,
or after a few seconds. There may be a
malfunction in a system if the lights do
not come on, or go off. Have the vehicle
inspected by your Lexus dealer.
*2
: This light comes on when the system is
turned off.
*3
: This light illuminates on the outside rear
view mirrors.
*4
: Vehicles without Center Display or rear
camera.
*5
: This light illuminates on the multi-infor-
mation display with a message.
*6
: When the outside temperature is
approximately 37°F (3°C) or lower,
this indicator will flash for approxi-
mately 10 seconds, then stay on.
*7
: This light illuminates on the center
panel.
*8
: This light illuminates on the center dis-
play.
*9
: Vehicles with 7-inch display.
*10
: Vehicles with 12.3-inch display.
Intuitive parking assist detection
indicator
*1, 4
(P.272)
(Flashes)
Slip indicator
*1
(P.293)
VSC OFF indicator
*1, 2
(P.294)
Smart access system with push-
button start indicator
*5
(P.177)
“READY” indicator (P.177)
EV drive mode indicator
(P.182)
(U.S.A.)
Parking brake indicator
(P.192)
(Canada)
Parking brake indicator
(P.192)
Brake hold standby indicator
*1
(P.194)
Brake hold operated indica-
tor
*1
(P.194)
EV indicator (P.63)
Low outside temperature indi-
cator
*6
(P.95)
Security indicator
*7
(P.71,
72)
(U.S.A.)
“AIR BAG ON/OFF” indica-
tor
*8
(P.41)
(Canada)
“AIR BAG ON/OFF” indica-
tor
*8
(P.41)
Stop light indicator
*9
(P.83)
Stop light indicator
*10
(P.83)
Eco drive mode indicator
(P.290)
Sport mode indicator (if
equipped) (P.290)
Sport S mode indicator (if
equipped) (P.290)
Sport S+ mode indicator (if
equipped) (P.290)
Custom mode indicator (if
equipped) (P.290)
83
2-1. Instrument cluster
2
Vehicle status information and indicators
■ Intuitive parking assist OFF indicator
Vehicles without Center display: The indi-
cators turn off when the shift position is
changed to R regardless of whether the
intuitive parking assist function is turned on
or off.
■ Stop light indicator
This light comes on when the stop lights are
illuminated by the operation of the brake
pedal or the driving assist system.
84
2-1. Instrument cluster
■ Locations of gauges and meters
Type 1
Multi-information display
Presents the driver with a variety of vehicle data and displays warning messages if a mal-
function occurs. (P.97, 419)
Shift position/shift range
Outside temperature
Displays the ambient temperature within the range of -40°F (-40°C) to 140°F (60°C).
Tachometer/Hybrid System Indicator
Tachometer: Displays the engine speed in revolutions per minute.
Hybrid System Indicator: Displays hybrid system output or regeneration level. (P.87)
Clock
Automatically adjusts the time by using the GPS time information (GPS clock). For details,
refer to the “MULTIMEDIA OWNER’S MANUAL”.
Engine coolant temperature gauge
Displays the engine coolant temperature.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Digital speedometer
Displays the vehicle speed
Gauges and meters (7-inch display)
Meter display
A
B
C
D
E
F
G
H
85
2-1. Instrument cluster
2
Vehicle status information and indicators
Odometer and trip meter display (P.88)
Type 2
Multi-information display
Presents the driver with a variety of vehicle data and displays warning messages if a mal-
function occurs. (P.97, 419)
Shift position/shift range
Outside temperature
Displays the ambient temperature within the range of -40°F (-40°C) to 140°F (60°C).
Analog speedometer
Displays the vehicle speed.
Clock
Automatically adjusts the time by using the GPS time information (GPS clock). For details,
refer to the “MULTIMEDIA OWNER’S MANUAL”.
Engine coolant temperature gauge
Displays the engine coolant temperature.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Digital speedometer
Displays the vehicle speed.
Odometer and trip meter display (P.88)
I
A
B
C
D
E
F
G
H
I
86
2-1. Instrument cluster
Type 3
Multi-information display
Presents the driver with a variety of vehicle data and displays warning messages if a mal-
function occurs. (P.97, 419)
Shift position/shift range
Outside temperature
Displays the ambient temperature within the range of -40°F (-40°C) to 140°F (60°C).
Analog speedometer
Displays the vehicle speed.
Tachometer/Hybrid System Indicator
Depending on the selected drive mode or certain settings, the display will change.
(P.461)
Tachometer: Displays the engine speed in revolutions per minute.
Hybrid System Indicator: Displays hybrid system output or regeneration level. (P.87)
Clock
Automatically adjusts the time by using the GPS time information (GPS clock). For details,
refer to the “MULTIMEDIA OWNER’S MANUAL”.
Engine coolant temperature gauge
Displays the engine coolant temperature.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Odometer and trip meter display (P.88)
A
B
C
D
E
F
G
H
I
87
2-1. Instrument cluster
2
Vehicle status information and indicators
■ The meters and display illuminate when
The power switch is in ON.
■ Hybrid System Indicator
Type 1
This illustration is for explanation only and
may differ depending on the specifications
of the vehicle.
Charge area
Shows regeneration
*
status.
Eco area
Shows that the vehicle is being driven in an
Eco-friendly manner.
Power area
Shows that an Eco-friendly driving range is
being exceeded (during full power driving
etc.)
Hybrid Eco area
Shows that gasoline engine power is not
being used very often.
Type 3
This illustration is for explanation only and
may differ depending on the specifications
of the vehicle.
Charge area
Shows regeneration
*
status.
Eco area
Shows that the vehicle is being driven in an
Eco-friendly manner.
Power area
Shows that an Eco-friendly driving range is
being exceeded (during full power driving
etc.)
Hybrid Eco area
Shows that gasoline engine power is not
being used very often.
The gasoline engine will automatically stop
and restart under various conditions.
● By keeping the indicator needle within
Eco area, more Eco-friendly driving can
be achieved.
● Charge area indicates regeneration
*
sta-
tus. Regenerated energy will be used to
charge the hybrid battery (traction bat-
tery).
*
: When used in this manual, regeneration
refers to the conversion of energy cre-
ated by the movement of the vehicle into
electrical energy.
In the following situation, the Hybrid System
Indicator does not operate.
● “READY” indicator is not illuminated.
● The shift position is in other than D or S.
■ Changing between the tachometer or
hybrid system indicator
Depending on the current drive mode or
settings, the displays will change as follows.
Settings can be changed on the Center Dis-
play. (P.460)
● The tachometer will be displayed in the
following situations.
• When the meter display type setting is set
to display type 1 or display type 3
• When the tachometer setting is set to
always display the tachometer
• When the tachometer setting is set to
change according to the driving mode
A
B
C
D
A
B
C
D
88
2-1. Instrument cluster
and a driving mode other than Eco drive
mode is selected
● The hybrid system indicator will be dis-
played in the following situations.
• When the meter display type setting is set
to display type 1 or display type 3
• When the tachometer setting is set to
always display the hybrid system indica-
tor
• When the tachometer setting is set to
change according to the driving mode
and Eco drive mode is selected
■ Engine speed
On hybrid electric vehicles, engine speed is
precisely controlled in order to help
improve fuel efficiency and reduce exhaust
emissions etc.
There are times when the engine speed that
is displayed may differ even when vehicle
operation and driving conditions are the
same.
■ Outside temperature display
● In the following situations, the correct
outside temperature may not be dis-
played, or the display may take longer
than normal to change:
• When stopped, or driving at low speeds
(less than 12 mph [20 km/h])
• When the outside temperature has
changed suddenly (at the entrance/exit
of a garage, tunnel, etc.)
● When “--” or “E” is displayed, the system
may be malfunctioning. Take your vehicle
to your Lexus dealer.
■ Liquid crystal display
Small spots or light spots may appear on the
display. This phenomenon is characteristic
of liquid crystal displays, and there is no
problem continuing to use the display.
■ Display items
Odometer
Displays the total distance the vehicle has
been driven.
Trip meter A/trip meter B
Displays the distance the vehicle has been
driven since the meter was last reset. Trip
meters A and B can be used to record and
WARNING
■ The information display at low tem-
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
For example, there is a lag between the
driver’s shifting and the new gear num-
ber appearing on the display. This lag
could cause the driver to downshift
again, causing rapid and excessive
engine braking and possibly an accident
resulting in death or injury.
NOTICE
■ To prevent damage to the engine and
its components
● Do not let the indicator needle of the
tachometer enter the red zone, which
indicates the maximum engine speed.
● The engine may be overheating if the
engine coolant temperature gauge is
in the red zone (H); or “Engine Cool-
ant Temp High Stop in a Safe Place
See Owner’s Manual” is shown on the
multi-information display. In this case,
immediately stop the vehicle in a safe
place, and check the engine after it has
cooled completely. (P.436)
Odometer and trip meter dis-
play
89
2-1. Instrument cluster
2
Vehicle status information and indicators
display different distances independently.
Distance until next engine oil
change
Displays the distance the vehicle can be
driven until an oil change is necessary.
■ Changing the display
Each time the “ODO TRIP” switch is
pressed, the displayed item will be
changed. When the trip meter is dis-
played, pressing and holding the switch
will reset the trip meter.
The brightness of the instrument panel
lights can be adjusted.
1 Darker
2 Brighter
■ Brightness of the instrument panel lights
(day mode and night mode)
The brightness of the instrument panel
lights is changed between day mode and
night mode.
● Day mode: When the tail lights are off or
when the tail lights are on but the sur-
rounding area is bright
● Night mode: When the tail lights are on
and the surrounding area is dark
When the tail lights are on but the sur-
rounding area is bright, any adjustments
made to the meter brightness levels will be
applied to both modes at once.
Changing the instrument panel
light brightness
90
2-1. Instrument cluster
■ Locations of gauges and meters
The meter display type setting can be changed. (P.460)
Type1/Type 3 (except F SPORT models)
Multi-information display
Presents the driver with a variety of vehicle data (P.97)
Displays warning messages if a malfunction occurs (P.419)
Outside temperature (P.95)
Analog meter (Type 1 only)
Depending on the selected drive mode or certain settings, the display will change.
(P.460)
Tachometer:
Displays the engine speed in revolutions per minute
Hybrid System Indicator:
Displays hybrid system output or regeneration level (P.94)
Digital speedometer
Displays the vehicle speed
Shift position/shift range (P.184)
Clock
The GPS clock’s time is automatically adjusted by utilizing GPS time information.
For details, refer to the “MULTIMEDIA OWNER’S MANUAL”.
Gauges and meters (12.3-inch display)
Meter display
A
B
C
D
E
F
91
2-1. Instrument cluster
2
Vehicle status information and indicators
Distance to empty
Displays the driving range with remaining fuel (P.95)
Fuel gauge
Displays the quantity of fuel remaining in the tank.
In the following situations, the actual quantity of fuel remaining in the tank may not be dis-
played correctly. Refer to P.95 if the actual quantity of fuel remaining in the tank is not dis-
played correctly.
• A small amount of fuel is added.
• Fuel is added with the fuel gauge near or at “F”.
• The vehicle is stopped on an uneven surface, such as a slope.
• The vehicle is driven on a slope or around a curve.
Engine coolant temperature gauge
Displays the engine coolant temperature
Odometer and trip meter display (P.88)
Type 2
Analog meter
Depending on the selected drive mode or certain settings, the display will change.
(P.460)
Tachometer:
Displays the engine speed in revolutions per minute
Hybrid System Indicator:
Displays hybrid system output or regeneration level (P.94)
Multi-information display
Presents the driver with a variety of vehicle data (P.97)
Displays warning messages if a malfunction occurs (P.419)
G
H
I
J
A
B
92
2-1. Instrument cluster
Outside temperature (P.95)
Digital speedometer
Displays the vehicle speed
Shift position/shift range (P.184)
Clock
The GPS clock’s time is automatically adjusted by utilizing GPS time information.
For details, refer to the “MULTIMEDIA OWNER’S MANUAL”.
Analog speedometer
Displays the vehicle speed
Distance to empty
Displays the driving range with remaining fuel (P.95)
Fuel gauge
Displays the quantity of fuel remaining in the tank.
In the following situations, the actual quantity of fuel remaining in the tank may not be dis-
played correctly. Refer to P.95 if the actual quantity of fuel remaining in the tank is not dis-
played correctly.
• A small amount of fuel is added.
• Fuel is added with the fuel gauge near or at “F”.
• The vehicle is stopped on an uneven surface, such as a slope.
• The vehicle is driven on a slope or around a curve.
Engine coolant temperature gauge
Displays the engine coolant temperature
Odometer and trip meter display (P.88)
Type 3 (F SPORT models)
C
D
E
F
G
H
I
J
K
93
2-1. Instrument cluster
2
Vehicle status information and indicators
Multi-information display
Presents the driver with a variety of vehicle data (P.90)
Displays warning messages if a malfunction occurs (P.410)
Outside temperature (P.95)
Tachometer/Hybrid System Indicator
Tachometer:
Displays the engine speed in revolutions per minute
Hybrid System Indicator:
Displays hybrid system output or regeneration level (P.94)
Clock
The GPS clock’s time is automatically adjusted by utilizing GPS time information.
For details, refer to the “MULTIMEDIA OWNER’S MANUAL”.
Distance to empty
Displays the driving range with remaining fuel (P.95)
Fuel gauge
Displays the quantity of fuel remaining in the tank.
In the following situations, the actual quantity of fuel remaining in the tank may not be dis-
played correctly. Refer to P.95 if the actual quantity of fuel remaining in the tank is not dis-
played correctly.
• A small amount of fuel is added.
• Fuel is added with the fuel gauge near or at “F”.
• The vehicle is stopped on an uneven surface, such as a slope.
• The vehicle is driven on a slope or around a curve.
Digital speedometer
Displays the vehicle speed
Shift position/shift range (P.184)
Engine coolant temperature gauge
Displays the engine coolant temperature
Odometer and trip meter display (P.96)
■ Rev indicator (F SPORT models)
When the engine speed reaches a set
speed or the red zone, the tachometer
will be highlighted.
The indicators will be displayed in amber
when the engine speed reaches a set
speed, and in red when the engine speed
reaches the red zone.
The engine speed at which the Rev indica-
tor is displayed can be changed on the
center display. (P.460)
A
B
C
D
E
F
G
H
I
J
94
2-1. Instrument cluster
Ring display state
Bar display state
■ Rev peak (F SPORT models)
When the engine speed reaches or
exceeds 4000 r/min, an afterimage of
the tachometer will be displayed at the
highest engine speed for approxi-
mately 1 second.
Ring display state
Bar display state
■ The meters and display illuminate when
The power switch is in ON.
■ Engine speed
On hybrid vehicles, engine speed is pre-
cisely controlled in order to help improve
fuel efficiency and reduce exhaust emis-
sions etc.
There are times when the engine speed that
is displayed may differ even when vehicle
operation and driving conditions are the
same.
■ Hybrid System Indicator
Charge area
Shows regeneration
*
status.
Regenerated energy will be used to charge
the hybrid battery (traction battery).
A
95
2-1. Instrument cluster
2
Vehicle status information and indicators
Eco area
Shows that the vehicle is being driven in an
Eco-friendly manner.
By keeping the bar display within Eco area,
more Eco-friendly driving can be achieved.
Power area
Shows that an Eco-friendly driving range is
being exceeded (during full power driving
etc.)
Hybrid Eco area
Shows that gasoline engine power is not
being used very often.
The gasoline engine will automatically stop
and restart under various conditions.
*
: When used in this manual, regeneration
refers to the conversion of energy cre-
ated by the movement of the vehicle into
electrical energy.
In the following situation, the Hybrid System
Indicator does not operate.
● “READY” indicator is not illuminated.
● The shift position is in any position other
than D or S.
■ Distance to empty
● This distance is computed based on your
average fuel consumption. As a result,
the actual distance that can be driven
may differ from that displayed.
● When only a small amount of fuel is
added to the tank, the display may not be
updated. When refueling, turn the power
switch off. If the vehicle is refueled with-
out turning the power switch off, the dis-
play may not be updated.
● When “Refuel” is displayed, the remain-
ing fuel amount is low and the distance
that can be driven with the remaining fuel
cannot be calculated. Refuel immedi-
ately.
■ Manually updating the fuel gauge and
possible driving range
The fuel gauge and the possible driving
range are linked. If the displays of the fuel
gauge and possible driving range do not
update after adding a small amount of fuel,
the displays can be updated by performing
the following procedure.
1 Stop the vehicle on a level surface.
2 Press the “ODO TRIP” switch to
change the odometer and trip meter
display to odometer.
3 Turn the power switch off.
4 While pressing and holding the “ODO
TRIP” switch, turn the power switch to
ON.
5 Continue to hold the “ODO TRIP”
switch for approximately 5 seconds,
and then release it once the odometer
begins flashing.
Updating is complete once the odometer
flashes for approximately 5 seconds and
then the display returns to normal.
■ Outside temperature display
● Displays the outside temperature within
the range of -40°F (-40°C) to 140°F
(60°C)
● When the outside temperature is
approximately 37°F (3°C). or lower, the
indicator will flash for approximately
10 seconds, then stay on.
● In the following situations, the correct
outside temperature may not be dis-
played, or the display may take longer
than normal to change:
• When stopped, or driving at low speeds
(less than 12 mph [20 km/h])
• When the outside temperature has
changed suddenly (at the entrance/exit
of a garage, tunnel, etc.)
● When “--” or “E” is displayed, the system
may be malfunctioning. Take your vehicle
to your Lexus dealer.
■ Liquid crystal display
Small spots or light spots may appear on the
display. This phenomenon is characteristic
of liquid crystal displays, and there is no
problem continuing to use the display.
B
C
D
96
2-1. Instrument cluster
■ Free/Open Source Software Informa-
tion
This product contains Free/Open Source
Software (FOSS). The license information
and/or the source code of such FOSS can
be found at the following URL.
https://www.yazaki-group.com/rd-
tech/oss/880
■ Customization
Some functions can be customized.
(P.460)
■ Display items
Odometer
Displays the total distance the vehicle has
been driven.
Trip meter A/trip meter B
Displays the distance the vehicle has been
driven since the meter was last reset. Trip
meters A and B can be used to record and
display different distances independently.
Distance until next engine oil
change
Displays the distance the vehicle can be
driven until an oil change is necessary.
■ Changing the display
Each time the “ODO TRIP” switch is
pressed, the displayed item will be
changed. When the trip meter is dis-
played, pressing and holding the switch
will reset the trip meter.
■ Pop-up display
Distance until the next engine oil
change will be displayed when a warn-
ing message indicating that oil mainte-
nance should be performed soon or is
required is displayed.
WARNING
■ The information display at low tem-
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
For example, there is a lag between the
driver’s shifting and the new gear num-
ber appearing on the display. This lag
could cause the driver to downshift
again, causing rapid and excessive
engine braking and possibly an accident
resulting in death or injury.
NOTICE
■ To prevent damage to the engine and
its components
● Do not let the indicator needle of the
tachometer enter the red zone, which
indicates the maximum engine speed.
● The engine may be overheating if the
engine coolant temperature gauge is
in the red zone (H); or “Engine Cool-
ant Temp High Stop in a Safe Place
See Owner’ Manual” is shown on the
multi-information display. In this case,
immediately stop the vehicle in a safe
place, and check the engine after it has
cooled completely. (P.436)
Odometer and trip meter dis-
play
97
2-1. Instrument cluster
2
Vehicle status information and indicators
The brightness of the instrument panel
lights can be adjusted.
1 Darker
2 Brighter
■ Brightness of the instrument panel lights
(day mode and night mode)
The brightness of the instrument panel
lights can be adjusted individually.
In the following situations, the meters
changes between day mode and night
mode.
● Day mode: When the tail lights are off or
when the tail lights are on but the sur-
rounding area is bright
● Night mode: When the tail lights are on
and the surrounding area is dark
■ Display area
A variety of driving-related information
can be displayed. Depending on the
situation, warning or advice pop-up
displays will also be displayed.
Content display area
Driving support system informa-
tion display area
When a menu icon other than is
selected, if the driving support system
operates, the system operating state will be
displayed.
■ Items displayed in the content dis-
play area
By selecting menu icons on the multi-
information display, the following items
can be displayed.
Changing the instrument panel
light brightness
Multi-information display
(7-inch display)
Displayed contents summary
Driving information display
Navigation system-linked dis-
play (if equipped)
Audio system-linked display
A
B
98
2-1. Instrument cluster
■ Liquid crystal display
P.88
Following information is displayed in
each area on the multi-information dis-
play.
Content display area (left)
Content display area (right)
Content display area (center)
Driving support system informa-
tion display area
When driving support system information
is displayed on the content display area,
the system operating state will not be dis-
played in this area.
Driving support system infor-
mation display
Warning message
WARNING
■ Caution for use while driving
● When operating the multi-information
display while driving, pay extra atten-
tion to the safety of the area around
the vehicle.
● Do not look continuously at the multi-
information display while driving as
you may fail to see pedestrians, objects
on the road, etc. ahead of the vehicle.
■ The information display at low tem-
peratures
P.88
Multi-information display
(
12.3-inch display)
The multi-information display is
used to display fuel efficiency
related information and various
types of driving-related informa-
tion. The multi-information display
can also be used to change the dis-
play settings and other settings.
Display contents
A
B
C
D
99
2-1. Instrument cluster
2
Vehicle status information and indicators
RSA (Road Sign Assist) display
area (if equipped) (P.246)
■ Content display area (center)
Driving support system information
display (P.106)
Map display (if equipped) (P.106)
Blank (P.109)
■ Content display area (left/right)
Fuel Economy (P.104)
EV Driving Ratio (P.105)
Driving support system information
display (P.106)
Navigation system-linked informa-
tion display (P.106)
Audio system-linked display
(P.106)
Drive information display (P.106)
Energy monitor (P.107)
G-force display (P.105)
Blank (P.109)
■ The multi-information display is dis-
played when
The power switch is in ON.
■ Liquid crystal display
P.95
■ When changing driving mode
Background color of the multi-information
display is changed following the selected
driving mode. (P.290)
E
WARNING
■ Caution for use while driving
● When operating the multi-information
display while driving, pay extra atten-
tion to the safety of the area around
the vehicle.
● Do not look continuously at the multi-
information display while driving as
you may fail to see pedestrians, objects
on the road, etc. ahead of the vehicle.
■ The information display at low tem-
peratures
P.96
100
2-1. Instrument cluster
*
: If equipped
The meter display type setting of head-
up display can be changed. (P.460)
The content displayed will differ
according to the driving conditions and
display mode of the head-up display.
Depending on the situation, pop-up
displays will also be displayed.
■ Full
Illustrations used in this text are intended
as examples, and may differ from the
image that is actually displayed by the
head-up display.
Driving support system display
area (P.106)/Navigation sys-
tem-linked display area/Hybrid
system Indicator or Tachometer
display area (P.102)
Driving support system display
area (P.106)
Speedometer
Shift position/shift range (P.184)
RSA (Road Sign Assist) display (if
equipped) (P.246)
■ Standard
Illustrations used in this text are intended
as examples, and may differ from the
image that is actually displayed by the
head-up display.
Driving support system display
area (P.106)
Speedometer
Shift position/shift range (P.184)
RSA (Road Sign Assist) display (if
equipped) (P.246)
Head-up display
*
The head-up display projects a vari-
ety of driving-related information
and the operating state of the driv-
ing support systems on the wind-
shield.
Head-up display
A
B
C
D
E
A
B
C
D
101
2-1. Instrument cluster
2
Vehicle status information and indicators
■ Minimum
Speedometer
■ Head-up display will operate when
The power switch is in ON.
■ When using the head-up display
The head-up display may seem dark or hard
to see when viewed through sunglasses,
especially polarized sunglasses. Adjust the
brightness of the head-up display or
remove your sunglasses.
■ Street name display
Only street names which are included in the
map data will be displayed.
■ Changing settings of the head-up
display
1
Select on the Center display.
2
Select “Vehicle customize”.
3
Select “Head up display”.
The following settings can be changed.
Enabling/disabling the head-up dis-
play
Select to enabling/disabling the head-up
display.
Head-up display type
Select to change head-up display type.
(P.100)
Brightness and vertical position of
WARNING
■ When using the head-up display
● Check that the position and brightness
of the head-up display image does not
interfere with safe driving. Incorrect
adjustment of the image’s position or
brightness may obstruct the driver’s
view and lead to an accident, resulting
in death or serious injury.
● Do not continuously look at the head-
up display while driving as you may fail
to see pedestrians, objects on the
road, etc. ahead of the vehicle.
A
NOTICE
■ Head-up display projector
● Do not place any drinks near the head-
up display projector. If the projector
gets wet, electrical malfunctions may
result.
● Do not place anything on or put stick-
ers onto the head-up display projector.
Doing so could interrupt head-up dis-
play indications.
● Do not touch the inside of the head-up
display projector or thrust sharp edges
or the like into the projector.
Doing so could cause mechanical mal-
functions.
Using the head-up display
102
2-1. Instrument cluster
the head-up display
Select to adjust the brightness or vertical
position of the head-up display.
Display angle
Select to adjust the angle of the head-up
display.
■ Enabling/disabling of the head-up dis-
play
If the head-up display is disabled, it will
remain disabled when the power switch is
turned off then back to ON.
■ Display brightness
● In addition to the brightness setting, the
brightness of the display will change
automatically according to the ambient
brightness.
● When the temperature around the head-
up display is high, the display will gradu-
ally become dark to protect the head-up
display. It will gradually return to normal
when the temperature drops.
■ Head-up display automatic adjustment
If the display setting is recorded into mem-
ory, the head-up display will be automati-
cally adjusted. (P.163)
■ When the 12-volt battery is discon-
nected
The customize settings of the head-up dis-
play will be reset.
■ Hybrid System Indicator
Charge area
Eco area
Power area
Displays hybrid system output or regener-
ation level. For details, refer to P.94
■ Tachometer
Displays the engine speed in revolu-
tions per minute.
■ Head-up display is displayed when
The power switch is in ON.
■ Hybrid System Indicator/tachometer is
displayed when
● Hybrid System Indicator/tachometer is
displayed when all of the following condi-
tions are met:
• When LTA (Lane Tracing Assist), LDA
(Lane Departure Alert) and dynamic
radar cruise control is turned off.
• Full mode (P.102) is selected as head-
WARNING
■ Caution for changing settings of the
head-up display
As the hybrid system needs to be operat-
ing while changing the settings of the
head-up display, ensure that the vehicle
is parked in a place with adequate venti-
lation. In a closed area such as a garage,
exhaust gases including harmful carbon
monoxide (CO) may collect and enter
the vehicle. This may lead to death or a
serious health hazard.
NOTICE
■ When changing the settings of the
head-up display
To prevent 12-volt battery discharge,
ensure that the hybrid system is operat-
ing while changing the settings of the
head-up display.
Hybrid System Indica-
tor/tachometer display area
A
B
C
103
2-1. Instrument cluster
2
Vehicle status information and indicators
up display type.
/ : Change the screen and
move the cursor
/ : Change the displayed
content and scroll up/down the
screen
Press: Enter/Set
Press and hold: Reset/Display cus-
tomizable items, display the cursor
Return to the previous screen
Call sending/receiving and history
display
Linked with the hands-free system, sending
or receiving call is displayed. For details
regarding the hands-free system, refer to
the “MULTIMEDIA OWNER’S MAN-
UAL”.
Driving related information is dis-
played on the following displays.
Multi-information display
Head-up display (If equipped)
Center display
The items displayed will differ depend-
Displayed content
Components/Operations
Display of drive information
A
B
C
D
104
2-1. Instrument cluster
ing on the display.
■ Changing the meter display type
setting
The meter display type setting can be
changed on the screen of the Cen-
ter display. (P.460)
■ Changing the screen
Select items from the combination of 3
screens to display on each 3 content
display areas.
Press or of the meter control
switches to change the screen.
Warning message
Select to display a warning message.
If there is no warning messages, this page
will not be displayed. (P.110)
■ Changing the display contents
Switches items displayed on each con-
tents display area (left/center/right).
1 Press or to select the
screen.
2 Press and hold to display the
cursor on the content display area
(center).
3 Press or to move the cursor
and select the content display area.
4 Press or to select the items.
Current fuel economy
Displays the driving range with remaining
fuel.
Average fuel economy after reset
*
*
: Use the displayed fuel consumption as a
reference only.
Switching the display of the
multi-information display (vehi-
cles with 12.3-inch display)
A
Fuel Economy (vehicles with
12.3-inch display)
A
B
105
2-1. Instrument cluster
2
Vehicle status information and indicators
EV driving ratio after starting
Displays the percentage of EV driving
since the hybrid system was started.
*
Elapsed time after starting
Displays the elapsed time since hybrid sys-
tem was started.
*
*
: It is reset each time the hybrid system
stops.
Displays lateral G-forces on the vehi-
cle on the multi-information display.
Displays around the periphery of the
G-force display, the left and right
steering amount, accelerator pedal
input, and brake fluid pressure.
Vehicles with 7-inch display
Acceleration G-force on the vehi-
cle
Current G-force value (analyzed
value of front/rear and left/right G-
forces)
Record of the maximum G-forces
Accelerator pedal input
Brake fluid pressure
Steering amount
This display is intended for use as a guide-
line. Depending on factors such as the
road surface condition, temperature and
vehicle speed, the display may not show
the actual condition of the vehicle.
Vehicles with 12.3-inch display
Acceleration G-force on the vehi-
cle
Current G-force value (analyzed
value of front/rear and left/right G-
forces)
Record of the maximum G-forces
Accelerator pedal input
Brake fluid pressure
Steering amount
This display is intended for use as a guide-
line. Depending on factors such as the
road surface condition, temperature and
EV Ratio/EV Driving Ratio
(vehicles with 12.3-inch display)
G-force
A
B
A
B
C
D
E
F
A
B
C
D
E
F
106
2-1. Instrument cluster
vehicle speed, the display may not show
the actual condition of the vehicle.
Resetting the record of maximum
G-forces
The display is reset each time the hybrid
system is started.
Peak hold function
If lateral G-forces of 0.5 G or greater are
generated, the G-force value display will
turn amber and be held for 2 seconds.
■ G-force display
● The G-force values may not be zero even
when the vehicle is parked, such as when
it is parked on an incline.
● Depending on the vehicle usage condi-
tions, the brake fluid pressure display
may not reach its maximum reading even
though the brake pedal is fully depressed.
● If a 12-volt battery terminal is discon-
nected and reconnected, the steering
amount display may be disabled tempo-
rarily. After driving the vehicle for a while,
the display will be enabled.
The operating state of the following
systems can be displayed on the multi-
information display or head-up display
(if equipped).
LTA (Lane Tracing Assist)
(P.231)
LDA (Lane Departure Alert)
(P.235)
PDA (Proactive driving assist)
(P.241)
Dynamic radar cruise control
(P.249)
Cruise control (P.259)
Displays the map data according to the
navigation system. (P.460)
The following information is displayed
on the multi-information display.
Route guidance to destination
Street name
Compass
The operating conditions of the audio
system can be displayed on the multi-
information display.
The following items can be displayed
on the multi-information display.
Use the displayed information as a ref-
erence only.
Vehicles with 7-inch display
Drive information 1
• Current fuel consumption
Displays instantaneous current fuel con-
sumption
• Average fuel consumption
Drive information 2
• Average vehicle speed
• Total driving time
Drive information 3
• Distance to empty
Driving support system informa-
tion display
Map display (if equipped)
Navigation system-linked dis-
play
Audio system-linked display
Driving information display
107
2-1. Instrument cluster
2
Vehicle status information and indicators
Displays the driving range with remaining
fuel.
• Average fuel economy since starting
Displays the average fuel consumption
since starting.
Vehicles with 12.3-inch display
“Average Speed”: Displays the
average vehicle speed since display
was reset
“Total Time”: Displays elapsed time
since display was reset
■ Distance to empty
● This distance is computed based on your
average fuel consumption. As a result,
the actual distance that can be driven
may differ from that displayed.
● When only a small amount of fuel is
added to the tank, the display may not be
updated. When refueling, turn the power
switch off. If the vehicle is refueled with-
out turning the power switch off, the dis-
play may not be updated.
AWD operation status display can be
displayed on the Center display.
■ Displaying AWD operation status
display on the Center display
1 Select on the main menu.
2 Select “All wheel drive”.
■ AWD operation status
Front tire direction display
Displays the operation amount and direc-
tion of the steering wheel via changes to
the front tires on the display.
Torque distribution display
Displays the drive status of each wheel in 6
steps from 0 to 5.
The illustration used is intended as an
example, and may differ from the image
that is actually displayed on the Center
Display.
The tire pressure detected by the tire
pressure warning system can be dis-
played on the Center display.
■ Displaying the tire pressure on the
Center display
1 Select on the main menu.
2 Select “Tire pressure”.
■ Tire inflation pressure
P.372
The energy monitor can be used to
check the vehicle drive status, hybrid
AWD operation status display
(AWD models)
Tire pressure
Energy monitor
A
B
108
2-1. Instrument cluster
system operation status and energy
regeneration status on the Center dis-
play.
■ Displaying Energy monitor screen
on the Center display
Touch on the main menu, then
touch “Energy flow” on the sub menu.
For detail regarding the Center display
refer to “MULTIMEDIA OWNER’S
MANUAL”.
■ Reading the display
The arrows will appear in accordance
with the energy flow. When there is no
energy flow, arrows will not be dis-
played.
Multi-information display (vehicles
with 7-inch display)
The color of the arrows will change as
follows
Blue: When the hybrid battery (trac-
tion battery) is regenerated or
charged.
Orange: When the hybrid battery
(traction battery) is in use.
Red: When the gasoline engine is in
use.
Gasoline engine
Tires
Hybrid battery (traction battery)
Multi-information display (vehicles
with 12.3inch display)
The color of the arrows will change as
follows
Blue: When the hybrid battery (trac-
tion battery) is regenerated or
charged.
Orange: When the hybrid battery
(traction battery) is in use.
Red: When the gasoline engine is in
use.
Gasoline engine
Front tires
Rear tires
Hybrid battery (traction battery)
Center display
The image shows all the arrows as an
A
B
C
A
B
C
D
109
2-1. Instrument cluster
2
Vehicle status information and indicators
example. The actual display will vary
depending on conditions.
Gasoline engine
Front tires
Front electric motor (traction
motor)
Hybrid battery (traction battery)
Rear electric motor (traction
motor) (if equipped)
Rear tires
The color of the arrows will change as fol-
lows
Blue: When the hybrid battery (traction
battery) is regenerated or charged.
Orange: When the hybrid battery (traction
battery) is in use.
Red: When the gasoline engine is in use.
■ Hybrid battery (traction battery) status
The display changes in 8 levels according
to the remaining charge amount of the
hybrid battery (traction battery).
● The figure shows the multi-information
display as an example for explanation.
● These images are examples only, and
may vary slightly from actual conditions.
Low
High
■ Remaining charge amount warning of
hybrid battery (traction battery)
When a warning message is shown on the
multi-information display and the buzzer
sounds, follow the instructions displayed on
the screen to perform troubleshooting.
Displays no drive information contents
on the multi-information display.
Fuel consumption information can be
displayed on the Center display.
■ Displaying fuel consumption/his-
tory screen on the Center display
1 Select on the main menu.
2 Select “Trip info”.
3 Select “Current” or “History”.
■ Current fuel consumption screen
Resetting the history data
Fuel consumption in the past 15
minutes
Current fuel consumption
Average vehicle speed since the
hybrid system was started.
Trip range
Elapsed time since the hybrid sys-
A
B
C
D
E
F
A
B
Blank (No items)
Current fuel consumption/his-
tory screen
A
B
C
D
E
F
110
2-1. Instrument cluster
tem was started.
Use the displayed average fuel consump-
tion as a reference. The image is an exam-
ple only, and may vary slightly from actual
conditions.
■ History fuel consumption screen
Latest fuel consumption
Best recorded fuel consumption
Previous fuel consumption record
Resetting the history data
Updating the latest fuel consump-
tion data
Use the displayed average fuel consump-
tion as a reference. The image is an exam-
ple only, and may vary slightly from actual
conditions.
■ Updating the history data
Update the latest fuel consumption by
selecting “Update” to measure the current
fuel consumption again.
■ Resetting the data
The fuel consumption data can be deleted
by selecting “Clear data”.
■ Trip range
Displays the estimated maximum distance
that can be driven with the quantity of fuel
remaining.
This distance is computed based on your
average fuel consumption.
As a result, the actual distance that can be
driven may differ from that displayed.
Pop-up displays will be displayed on
the multi-information display or the
head-up display (if equipped) when
necessary.
When a pop-up display is displayed, a cur-
rent display may no longer be displayed. In
this case, the display will return after the
pop-up display disappears.
■ Driving support systems
Displays a warning/suggestion/advice
message or the operating state of a rel-
evant system.
Dynamic radar cruise control
Cruise control
LTA (Lane Tracing Assist)
LDA (Lane Departure Alert)
PCS (Pre-Collision System)
RSA (Road Sign Assist)
PDA (Proactive driving assist)
Safe Exit Assist
Emergency Driving Stop System
■ Warning message
Some warning messages are displayed
when necessary, according to certain
conditions.
Warning messages are cleared by
pressing and holding switch function
change switch. (P.103)
■ Hands-free system status
Displayed when the hands-free system
is operated.
A
B
C
D
E
Pop-up display information
111
2-1. Instrument cluster
2
Vehicle status information and indicators
■ Suggestion function
Displays suggestions to the driver in
the following situations. To select a
response to a displayed suggestion,
use the steering switches.
Suggestion to turn off the headlights
If the headlights are left on for a certain
amount of time after the power switch has
been turned off, a suggestion message will
be displayed.
■ Steering wheel switch operation
display
Displayed when an audio remote con-
trol switch or a talk switch on the steer-
ing wheel is operated.
■ Navigation system-linked informa-
tion
Depending on the situation, navigation
system-linked route guidance to desti-
nation may be displayed.
The following items will be displayed
on the multi-information display when
the power switch is turned off.
Distance driven since starting
*
Driving time since starting
*
EV driving ratio since starting
*
Average fuel consumption since
starting
*
*
: It is reset each time the hybrid system
stops.
Items displayed when the power
switch is turned off

Related Topics

Popular Owner Manuals