2019-2026 Lexus UX SUV Maintenance and care User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance and care for Your Lexus UX SUV First Generation (2019-2026)

345
6
6
Maintenance and care
Maintenance and care
6-1. Maintenance and care
Cleaning and protecting the vehi-
cle exterior................................
346
Cleaning and protecting the vehi-
cle interior .................................
349
6-2. Maintenance
Maintenance requirements..
352
General maintenance.............353
Emission inspection and mainte-
nance (I/M) programs.........
355
6-3. Do-it-yourself maintenance
Do-it-yourself service precau-
tions..............................................
357
Hood...............................................359
Positioning a floor jack............360
Engine compartment................361
12-volt battery.............................367
Tires ................................................369
Replacing the tire......................380
Tire inflation pressure..............385
Wheels...........................................387
Air conditioning filter...............388
Cleaning the hybrid battery (trac-
tion battery) air intake vent
389
Electronic key battery.............392
Checking and replacing fuses
........................................................
394
Headlight aim..............................396
Light bulbs....................................398
346
6-1. Maintenance and care
6-1.Maintenance and care
Working from top to bottom, liber-
ally apply water to the vehicle body,
wheel wells and underside of the
vehicle to remove any dirt and dust.
Wash the vehicle body using a
sponge or soft cloth, such as a
chamois.
For hard-to-remove marks, use car
wash soap and rinse thoroughly with
water.
Wipe away any water.
Wax the vehicle when the water-
proof coating deteriorates.
If water does not bead on a clean surface,
apply wax when the vehicle body is cool.
■ Self-restoring coat
The vehicle body has a self-restoring coat-
ing that is resistant to small surface
scratches caused in a car wash etc.
● The coating lasts for 5 to 8 years from
when the vehicle is delivered from the
plant.
● The restoration time differs depending on
the depth of the scratch and outside tem-
perature. The restoration time may
become shorter when the coating is
warmed by applying warm water.
● Deep scratches caused by keys, coins,
etc. cannot be restored.
● Do not use wax that contain abrasives.
■ Automatic car washes
● Before washing the vehicle:
• Fold the mirrors
• Turn off the power back door (if
equipped)
Start washing from the front of the vehicle.
Extend the mirrors before driving.
● Brushes used in automatic car washes
may scratch the vehicle surface, parts
(wheel, etc.) and harm your vehicle’s
paint.
● Rear spoiler may not be washable in
some automatic car washes. There may
also be an increased risk of damage to
vehicle.
● When the shift position needs to be held
in N, refer to P.188
■ High pressure car washes
As water may enter the cabin, do not bring
the nozzle tip near the gaps around the
doors or perimeter of the windows, or spray
these areas continuously.
■ Note for a smart access system with
push-button start
● If the door handle becomes wet while the
electronic key is within the effective
range, the door may lock and unlock
repeatedly. In that case, follow the follow-
ing correction procedures to wash the
vehicle:
• Place the key in a position 6 ft. (2 m) or
more separate from the vehicle while the
vehicle is being washed. (Take care to
ensure that the key is not stolen.)
• Set the electronic key to battery-saving
mode to disable the smart access system
with push-button start. (P.140)
● If the electronic key is inside the vehicle
and a door handle becomes wet during a
car wash, a buzzer may sound outside the
vehicle and “Key Detected in Vehicle”
may be shown on the multi-information
display. To turn off the alarm, lock all the
doors.
■ Wheels and wheel ornaments
● Remove any dirt immediately by using a
neutral detergent.
● Wash detergent off with water immedi-
Cleaning and protecting the
vehicle exterior
Perform cleaning in a manner
appropriate to each component
and its material.
Cleaning instructions
347
6-1. Maintenance and care
6
Maintenance and care
ately after use.
● To protect the paint from damage, make
sure to observe the following precau-
tions.
• Do not use acidic, alkaline or abrasive
detergent
• Do not use hard brushes
• Do not use detergent on the wheels
when they are hot, such as after driving or
parking in hot weather
■ Brake pads and calipers
Rust may form if the vehicle is parked with
wet brake pads or disc rotors, causing them
to stick. Before parking the vehicle after it is
washed, drive slowly and apply the brakes
several times to dry the parts.
■ Bumpers
Do not scrub with abrasive cleaners.
■ Front side windows water-repellent
coating
The following precautions can extend the
effectiveness of the water-repellent coat-
ing.
● Remove any dirt, etc. from the front side
windows regularly.
● Do not allow dirt and dust to accumulate
on the windows for a long period.
Clean the windows with a soft, damp
cloth as soon as possible.
● Do not use wax or glass cleaners that
contain abrasives when cleaning the win-
dows.
● Do not use any metallic objects to
remove condensation build up.
■ Plated portions
If dirt cannot be removed, clean the parts as
follows:
● Use a soft cloth dampened with an
approximately 5% solution of neutral
detergent and water to clean the dirt off.
● Wipe the surface with a dry, soft cloth to
remove any remaining moisture.
● To remove oily deposits, use alcohol wet
wipes or a similar product.
WARNING
■ When washing the vehicle
Do not apply water to the inside of the
engine compartment. Doing so may
cause the electrical components etc. to
catch fire.
■ When cleaning the windshield (vehi-
cles with rain-sensing windshield wip-
ers)
Set the wiper switch to off.
If the switch is in AUTO, the wipers may
operate unexpectedly in the following
situations, and may result in hands being
caught or other serious injuries and
cause damage to the wiper blades.
Off
AUTO
● When the upper part of the windshield
where the raindrop sensor is located is
touched by hand
● When a wet rag or similar is held close
to the raindrop sensor
● If something bumps against the wind-
shield
● If you directly touch the raindrop sen-
sor body or if something bumps into
the raindrop sensor
■ Precautions regarding the exhaust
pipe
Exhaust gasses cause the exhaust pipe to
become quite hot.
When washing the vehicle, be careful not
to touch the pipe until it has cooled suffi-
ciently, as touching a hot exhaust pipe
can cause burns.
A
B
348
6-1. Maintenance and care
WARNING
■ Precautions regarding the front and
rear bumpers
If the paint of the rear bumper is chipped
or scratched, the following systems may
not function correctly. If this occurs, con-
sult your Lexus dealer.
● Lexus Safety System + 3
● BSM
● RCTA
● PKSB (if equipped)
NOTICE
■ To prevent paint deterioration and
corrosion on the body and compo-
nents (aluminum wheels etc.)
● Wash the vehicle immediately in the
following cases:
• After driving near the sea coast
• After driving on salted roads
• If coal tar or tree sap is present on the
paint surface
• If dead insects, insect droppings or
bird droppings are present on the
paint surface
• After driving in an area contaminated
with soot, oily smoke, mine dust, iron
powder or chemical substances
• If the vehicle becomes heavily soiled
with dust or mud
• If liquids such as benzene and gasoline
are spilled on the paint surface
● If the paint is chipped or scratched,
have it repaired immediately.
● To prevent the wheels from corroding,
remove any dirt and store in a place
with low humidity when storing the
wheels.
■ Cleaning the exterior lights
● Wash carefully. Do not use organic
substances or scrub with a hard brush.
This may damage the surfaces of the
lights.
● Do not apply wax to the surfaces of the
lights.
Wax may cause damage to the lenses.
■ When using an automatic car wash
(vehicles with rain-sensing windshield
wipers)
Set the wiper switch to the off position.
If the wiper switch is in AUTO, the wipers
may operate and the wiper blades may
be damaged.
■ When using a high pressure car wash
● When washing the vehicle, do not
spray the camera or its surrounding
area directly with a high pressure
washer. Shock applied from high pres-
sure water may cause the device to not
operate normally.
● Do not spray water directly on the
radar which is equipped behind the
radar sensor cover. Otherwise it may
cause the device to be damaged.
● Do not bring the nozzle tip close to
boots (rubber or resin manufactured
cover), connectors or the following
parts. The parts may be damaged if
they come into contact with high-pres-
sure water.
• Traction related parts
• Steering parts
• Suspension parts
• Brake parts
● Keep the cleaning nozzle at least 11.9
in. (30 cm) away from the vehicle
body. Otherwise resin section, such as
moldings and bumpers, may be
deformed and damaged. Also, do not
continuously hold the nozzle in the
same place.
349
6-1. Maintenance and care
6
Maintenance and care
Remove dirt and dust using a vac-
uum cleaner. Wipe dirty surfaces
with a cloth dampened with luke-
warm water.
If dirt cannot be removed, wipe it off
with a soft cloth dampened with
neutral detergent diluted to approx-
imately 1%.
Wring out any excess water from
the cloth and thoroughly wipe off
remaining traces of detergent and
water.
■ Shampooing the carpets
There are several commercial foaming-
type cleaners available. Use a sponge or
brush to apply the foam. Rub in overlapping
circles. Do not use water. Wipe dirty sur-
faces and let them dry. Excellent results are
obtained by keeping the carpet as dry as
possible.
■ Handling the seat belts
Clean with mild soap and lukewarm water
using a cloth or sponge. Also check the
belts periodically for excessive wear, fray-
ing or cuts.
■ Front side windows with UV protective
coating (vehicles with UV protective
coating)
The front side windows have UV protective
coating. To prevent any damage to the UV
protective coating, observe the following:
● If the windows are dirty, gently wipe them
NOTICE
● Do not spray the lower part of the
windshield continuously. If water
enters the air conditioning system
intake located near the lower part of
the windshield, the air conditioning
system may not operate correctly.
● Do not wash the underside of the vehi-
cle using a high pressure car washer.
Cleaning and protecting the
v
ehicle interior
Perform cleaning in a manner
appropriate to each component
and its material.
Protecting the vehicle interior
350
6-1. Maintenance and care
with a cloth soaked in water or lukewarm
water as soon as possible.
● If the windows are very dirty, do not open
and close them repeatedly.
WARNING
■ Water in the vehicle
● Do not splash or spill liquid in the vehi-
cle, such as on the floor, in the hybrid
battery (traction battery) air intake
vent, and in the luggage compartment.
(P.69)
Doing so may cause the hybrid bat-
tery, electrical components, etc. to
malfunction or catch fire.
● Do not get any of the SRS components
or wiring in the vehicle interior wet.
(P.33)
An electrical malfunction may cause
the airbags to deploy or not function
properly, resulting in death or serious
injury.
● Vehicles with wireless charger: Do not
let the wireless charger (P.330) get
wet. Failure to do so may cause the
charger to become hot and cause
burns or could cause electric shock
resulting in death or serious injury.
■ Cleaning the interior (especially
instrument panel)
Do not use polish wax or polish cleaner.
The instrument panel may reflect off the
windshield, obstructing the driver’s view
and leading to an accident, resulting in
death or serious injury.
NOTICE
■ Cleaning detergents
● Do not use the following types of
detergent, as they may discolor the
vehicle interior or cause streaks or
damage to painted surfaces:
• Non-seat portions: Organic sub-
stances such as benzene or gasoline,
alkaline or acidic solutions, dye, and
bleach
• Seats: Alkaline or acidic solutions,
such as thinner, benzene, and alcohol
● Do not use polish wax or polish
cleaner. The instrument panel’s or
other interior part’s painted surface
may be damaged.
■ Water on the floor
Do not wash the vehicle floor with water.
Vehicle systems such as the audio sys-
tem may be damaged if water comes into
contact with electrical components such
as the audio system above or under the
floor of the vehicle. Water may also
cause the body to rust.
■ When cleaning the inside of the wind-
shield
Do not allow glass cleaner to contact the
lens. Also, do not touch the lens.
(P.216)
■ Cleaning the inside of the rear win-
dow
● Do not use glass cleaner to clean the
rear window, as this may cause dam-
age to the rear window defogger
heater wires or antenna. Use a cloth
dampened with lukewarm water to
gently wipe the window clean. Wipe
the window in strokes running parallel
to the heater wires or antenna.
● Be careful not to scratch or damage
the heater wires or antenna.
351
6-1. Maintenance and care
6
Maintenance and care
Remove dirt using a water-damp-
ened soft cloth or synthetic chamois.
Wipe the surface with a dry soft
cloth to remove any remaining
moisture.
■ Cleaning the areas with satin-finish
metal accents
The metal areas use a layer of real metal for
the surface. It is necessary to clean them
regularly. If dirty areas are left uncleaned
for long periods of time, they may be diffi-
cult to clean.
■ Cleaning the leather
Remove dirt and dust using a vac-
uum cleaner.
Wipe off any excess dirt and dust
with a soft cloth dampened with
diluted detergent.
Use a diluted water solution of approxi-
mately 5% neutral wool detergent.
Wring out any excess water from
the cloth and thoroughly wipe off all
remaining traces of detergent.
Wipe the surface with a dry, soft
cloth to remove any remaining
moisture. Allow the leather to dry in
a shaded and ventilated area.
■ Cleaning the synthetic leather
Remove dirt and dust using a vac-
uum cleaner.
If the area gets dirty, wipe it off with
a soft cloth dampened with water
and wrung out.
If dirt cannot be removed by wiping
with water, wipe it off using cleaner
for leather.
■ Caring for leather areas
Lexus recommends cleaning the interior of
the vehicle at least twice a year to maintain
the quality of the vehicle’s interior.
■ Dirt on the synthetic leather areas
Ingrained dirt which has been left
uncleaned for long periods of time is diffi-
cult to clean. Lexus recommends cleaning
the area regularly.
NOTICE
■ Cleaning the front side windows
Do not use any compound or abrasive
product (e.g., glass cleaner, detergent,
wax) to clean the windows. It may dam-
age the coating.
Cleaning the areas with satin-
finish metal accents
Cleaning the leather areas
NOTICE
■ Preventing damage to leather sur-
faces
Observe the following precautions to
avoid damage to and deterioration of
leather surfaces:
● Remove any dust or dirt from leather
surfaces immediately.
● Do not expose the vehicle to direct
sunlight for extended periods of time.
Park the vehicle in the shade, espe-
cially during summer.
● Do not place items made of vinyl, plas-
tic, or containing wax on the uphol-
stery, as they may stick to the leather
surface if the vehicle interior heats up
significantly.
352
6-2. Maintenance
6-2.Maintenance
■ Repair and replacement
It is recommended that genuine Lexus parts
be used for repairs to ensure performance
of each system. If non-Lexus parts are used
in replacement or if a repair shop other than
a Lexus dealer performs repairs, confirm
the warranty coverage.
■ Allow inspection and repairs to be per-
formed by a Lexus dealer
● Lexus technicians are well-trained spe-
cialists and are kept up to date with the
latest service information. They are well
informed about the operation of all sys-
tems on your vehicle.
● Keep a copy of the repair order. It proves
that the maintenance that has been per-
formed is under warranty coverage. If
any problem should arise while your vehi-
cle is under warranty, your Lexus dealer
will promptly take care of it.
General maintenance should be per-
formed on a daily basis. This can be
done by yourself or by a Lexus dealer.
Scheduled maintenance should be
performed at specified intervals
according to the maintenance sched-
ule.
For details about maintenance items and
schedules, refer to the “Warranty and Ser-
vice Guide”, “Owner’s Manual Supple-
ment” or “Scheduled Maintenance”.
■ Resetting the message indicating main-
tenance is required
After the required maintenance is per-
formed according to the maintenance
schedule, please reset the message.
To reset the message, follow the proce-
dures described below:
1 Select on the center display.
2 Select “Vehicle customize”.
3
Select “Utility”.
4
Select “Scheduled maintenance”.
5
Select “Reset”.
“The data has been reset” will be displayed
Maintenance requirements
To ensure safe and economical
driving, day-to-day care and regu-
lar maintenance are essential. It is
the owner’s responsibility to per-
form regular checks. Lexus recom-
mends the following maintenance:
WARNING
■ If your vehicle is not properly main-
tained
Improper maintenance could result in
serious damage to the vehicle and possi-
ble serious injury or death.
■ Handling of the 12-volt battery
● Engine exhaust, some of its constitu-
ents, and a wide variety of automobile
components contain or emit chemicals
known to the State of California to
cause cancer and birth defects and
other reproductive harm. Work in a
well ventilated area.
● Oils, fuels and fluids contained in vehi-
cles as well as waste produced by
component wear contain or emit
chemicals known to the State of Cali-
fornia to cause cancer and birth
defects or other reproductive harm.
Avoid exposure and wash any affected
area immediately.
● 12-volt battery posts, terminals and
related accessories contain lead and
lead compounds which are known to
cause brain damage. Wash your hands
after handling. (P.367)
General maintenance
Scheduled maintenance
353
6-2. Maintenance
6
Maintenance and care
on the center display when the reset proce-
dure has been completed.
You can perform some maintenance
procedures by yourself.
Please be aware that do-it-yourself
maintenance may affect warranty cov-
erage.
The use of Lexus repair manuals is recom-
mended.
For details about warranty coverage, refer
to the separate “Owner’s Guide”, “War-
ranty and Service Guide”, “Owner’s Man-
ual Supplement” or “Warranty Booklet”.
Do-it-yourself maintenance
General maintenance
Listed below are the general main-
tenance items that should be per-
formed at the intervals specified in
the “Warranty and Service Guide”
or “Owner’s Manual Supplement”.
It is recommended that any prob-
lem you notice should be brought to
the attention of your Lexus dealer
or qualified service shop for advice.
WARNING
■ If the hybrid system is operating
Turn the hybrid system off and ensure
that there is adequate ventilation before
performing maintenance checks.
Engine compartment
Items Check points
Brake fluid
Is the brake fluid at the
correct level? (P.365)
Engine/powe
r control unit
coolant
Is the engine/power con-
trol unit coolant at the cor-
rect level? (P.364)
Engine oil
Is the engine oil at the cor-
rect level? (P.361)
Exhaust sys-
tem
There should not be any
fumes or strange sounds.
Radiator/con-
denser
The radiator and con-
denser should be free
from foreign objects.
(P.365)
Washer fluid
Is there sufficient washer
fluid? (P.366)
354
6-2. Maintenance
Luggage compartment
Items Check points
12-volt battery
Check the connections.
(P.367)
Vehicle interior
Items Check points
Accelerator
pedal
• The accelerator pedal
should move smoothly
(without uneven pedal
effort or catching).
Brake pedal
• Does the brake pedal
move smoothly?
• Does the brake pedal
have appropriate clear-
ance from the floor?
• Does the brake pedal
have the correct
amount of free play?
Brakes
• The vehicle should not
pull to one side when
the brakes are applied.
• The brakes should work
effectively.
• The brake pedal should
not feel spongy.
• The brake pedal should
not get too close to the
floor when the brakes
are applied.
Head
restraints
• Do the head restraints
move smoothly and lock
securely?
Hybrid trans-
mission “Park”
mechanism
• When parked on a slope
and the shift lever is in P,
is the vehicle securely
stopped?
Indica-
tors/buzzers
• Do the indicators and
buzzers function prop-
erly?
Lights
• Do all the lights come
on?
• Are the headlights
aimed correctly?
Parking brake
• Does the parking brake
switch operate nor-
mally?
• When parked on a slope
and the parking brake is
on, is the vehicle
securely stopped?
Seat belts
• Do the seat belts oper-
ate smoothly?
• The seat belts should not
be damaged.
Seats
• Do the seat controls
operate properly?
Steering
wheel
• Does the steering wheel
rotate smoothly?
• Does the steering wheel
have the correct
amount of free play?
• There should not be any
strange sounds coming
from the steering wheel.
Vehicle exterior
Items Check points
Doors
• Do the doors operate
smoothly?
Engine hood
• Does the engine hood
lock system work prop-
erly?
Items Check points
355
6-2. Maintenance
6
Maintenance and care
The OBD system determines that a
problem exists somewhere in the emis-
sion control system. Your vehicle may
not pass the I/M test and may need to
be repaired. Contact your Lexus
dealer to service the vehicle.
When the 12-volt battery is discon-
nected or discharged
Readiness codes that are set during
ordinary driving are erased.
Also, depending on your driving
habits, the readiness codes may not
be completely set.
When the fuel tank cap is loose
The malfunction indicator lamp
comes on indicating a temporary
malfunction and your vehicle may
not pass the I/M test.
Fluid leaks
• There should not be any
signs of fluid leakage
after the vehicle has
been parked.
Tires
• Is the tire inflation pres-
sure correct?
• The tires should not be
damaged or exces-
sively worn.
• Have the tires been
rotated according to the
maintenance schedule?
• The wheel nuts should
not be loose.
Windshield
wipers/rear
window wiper
• The wiper blades should
not show any signs of
cracking, splitting, wear,
contamination or defor-
mation.
• The wiper blades should
clear the wind-
shield/rear window
without streaking or
skipping.
Items Check points
Emission inspection and
maintenance (I/M) pro-
grams
Some states have vehicle emission
inspection programs which include
OBD (On Board Diagnostics)
checks. The OBD system monitors
the operation of the emission con-
trol system.
If the malfunction indicator lamp
comes on
Your vehicle may not pass the
I/M test in the following situa-
tions:
356
6-2. Maintenance
The error code in the OBD system will
not be cleared unless the vehicle is
driven 40 or more times.
Contact your Lexus dealer to prepare
the vehicle for re-testing.
When the malfunction indicator
lamp still remains on after sev-
eral driving trips
If your vehicle does not pass the
I/M test
357
6-3. Do-it-yourself maintenance
6
Maintenance and care
6-3.Do-it-yourself maintena nce
Do-it-yourself service pre-
cautions
If you perform maintenance by
yourself, be sure to follow the cor-
rect procedure as given in these
sections.
Maintenance
Items Parts and tools
12-volt bat-
tery condition
(P.367)
• Grease
• Conventional wrench
(for terminal clamp
bolts)
Brake fluid
level
(P.365)
• FMVSS No.116 DOT 3
or SAE J1703 brake
fluid
FMVSS No.116 DOT 4
or SAE J1704 brake
fluid
• Rag or paper towel
• Funnel (used only for
adding brake fluid)
Engine/powe
r control unit
coolant level
(P.364)
• “Toyota Super Long Life
Coolant” or a similar
high quality ethylene
glycol-based non-sili-
cate, non-amine, non-
nitrite and non-borate
coolant with long-life
hybrid organic acid
technology
For the U.S.A.:
“Toyota Super Long Life
Coolant” is pre-mixed
with 50% coolant and
50% deionized water.
For Canada:
“Toyota Super Long Life
Coolant” is pre-mixed
with 55% coolant and
45% deionized water.
• Funnel (used only for
adding coolant)
Hybrid bat-
tery (traction
battery) air
intake vent
(P.389)
• Vacuum cleaner, etc.
• Phillips screwdriver
Engine oil
level
(P.361)
• “Toyota Genuine Motor
Oil” or equivalent
• Rag or paper towel
• Funnel (used only for
adding engine oil)
Fuses
(P.394)
• Fuse with same amper-
age rating as original
Light bulbs
(P.398)
• Bulb with same number
and wattage rating as
original
Headlight aim
• Phillips-head screw-
driver
Items Parts and tools
358
6-3. Do-it-yourself maintenance
Radiator and
condenser
(P.365)
Tire inflation
pressure
(P.385)
• Tire pressure gauge
• Compressed air source
Washer fluid
(P.366)
• Water or washer fluid
containing antifreeze
(for winter use)
• Funnel (used only for
adding water or washer
fluid)
WARNING
The engine compartment contains many
mechanisms and fluids that may move
suddenly, become hot, or become elec-
trically energized. To avoid death or seri-
ous injury, observe the following
precautions.
■ When working on the engine com-
partment
● Make sure that “POWER ON” on the
multi-information display and the
“READY” indicator are both off.
● Keep hands, clothing and tools away
from the moving fan and engine drive
belt.
● Be careful not to touch the engine,
power control unit, radiator, exhaust
manifold, etc. right after driving as they
may be hot. Oil and other fluids may
also be hot.
● Do not leave anything that may burn
easily, such as paper and rags, in the
engine compartment.
● Do not smoke, cause sparks or expose
an open flame to fuel. Fuel fumes are
flammable.
Items Parts and tools ■ When working near the electric cool-
ing fans or radiator grille
Be sure the power switch is OFF.
With power switch in ON, the electric
cooling fans may automatically start to
run if the air conditioning is on and/or the
coolant temperature is high. (P.365)
■ Safety glasses
Wear safety glasses to prevent flying or
falling material, fluid spray, etc. from get-
ting in your eyes.
NOTICE
■ If you remove the air cleaner filter
Driving with the air cleaner filter
removed may cause excessive engine
wear due to dirt in the air.
359
6-3. Do-it-yourself maintenance
6
Maintenance and care
1 Pull the hood lock release lever.
The hood will pop up slightly.
2 Pull up the auxiliary catch lever and
lift the hood.
3
Hold the hood open by inserting
the supporting rod into the slot.
Hood
Opening the hood
WARNING
■ Pre-driving check
Check that the hood is fully closed and
locked.
If the hood is not locked properly, it may
open while the vehicle is in motion and
cause an accident, which may result in
death or serious injury.
■ After installing the support rod into
the slot
Make sure the rod is properly inserted
into the slot to prevent the hood from
shutting on your head or body.
NOTICE
■ When closing the hood
Be sure to return the support rod to its
clip before closing the hood.
Closing the hood without returning the
support rod properly may cause the
hood to be damaged.
360
6-3. Do-it-yourself maintenance
■ Front
■ Rear
2WD models
AWD models
Positioning a floor jack
When using a floor jack, follow the
instructions in the manual provided
with the jack and perform the oper-
ation safely.
When raising your vehicle with a
floor jack, position the jack cor-
rectly.
Improper placement may damage
your vehicle or cause injury.
Location of the jack point
361
6-3. Do-it-yourself maintenance
6
Maintenance and care
Fuse boxes (P.394)
Engine coolant reservoir (P.364)
Engine oil filler cap (P.363)
Power control unit coolant reservoir (P.364)
Brake fluid reservoir (P.365)
Radiator (P.365)
Condenser (P.365)
Electric cooling fans
Engine oil level dipstick (P.361)
Washer fluid tank (P.366)
■ 12-volt battery
P.367
With the engine at operating tempera-
ture and turned off, check the oil level
on the dipstick.
Engine compartment
Components
A
B
C
D
E
F
G
H
I
J
Checking the engine oil
362
6-3. Do-it-yourself maintenance
1 Park the vehicle on level ground.
After warming up the engine and
turning off the hybrid system, wait
about 5 minutes for the oil to drain
back into the bottom of the engine.
2
Holding a rag under the end, pull
the dipstick out.
3
Wipe the dipstick clean.
4
Reinsert the dipstick fully.
5
Holding a rag under the end, pull
the dipstick out and check whether
the oil level is above low level mark.
Low level mark
6
Wipe the dipstick and reinsert it
fully.
■ Engine oil consumption
A certain amount of engine oil will be con-
sumed while driving. In the following situa-
tions, oil consumption may increase, and
engine oil may need to be refilled in
between oil maintenance intervals.
● When the engine is new, for example
directly after purchasing the vehicle or
after replacing the engine
● If low quality oil or oil of an inappropriate
viscosity is used
● When driving at high engine speeds or
with a heavy load, or when driving while
accelerating or decelerating frequently
● When leaving the engine idling for a long
time, or when driving frequently through
heavy traffic
■ Engine oil level rise
If the vehicle is repeatedly driven without
the engine warmed up, moisture caused by
dew condensation inside the engine or fuel
which did not burn mixes into the engine oil,
resulting in a rise in engine oil level.
However, this is not a malfunction.
For example, the engine become difficult to
be warmed up in the following situations.
● When driving a short distance
● When driving at a low speed
● When the outside temperature is low
When checking the engine oil, make sure
that the engine is warmed up. If the engine
oil level exceeds the refill upper limit mark,
contact your Lexus dealer.
■ Checking the oil type and prepar-
ing the items needed
Make sure to check the oil type and
prepare the items needed before add-
ing oil.
Engine oil selection
P.444
NOTICE
■ To prevent serious engine damage
Check the oil level on a regular basis.
A
Adding engine oil
363
6-3. Do-it-yourself maintenance
6
Maintenance and care
Oil quantity (Low level mark
Refill upper limit mark)
1.6 qt. (1.5 L, 1.3 Im.)
Items
Clean funnel
■ Adding engine oil
If the oil level is below or near the low
level mark, add engine oil of the same
type as that already in the engine.
1
Remove the oil filler cap by turning
it counterclockwise.
2
Add engine oil slowly, checking the
dipstick.
Make sure that the oil level does not
exceed the refill upper limit mark and is
between the low level mark and refill upper
limit mark.
Low level mark
Refill upper limit mark
The shape of the dipstick may differ
depending on the type of vehicle or
engine.
3 Install the oil filler cap by turning it
clockwise.
■ After changing the engine oil
The engine oil maintenance data should be
reset. Perform the following procedures:
1 Select on the center display.
2
Select “Vehicle customize”.
3
Select “Utility”.
4
Select “Oil maintenance”.
5
Select “Reset”.
“The data has been reset” will be displayed
when the reset procedure has been com-
pleted.
A
B
WARNING
■ Used engine oil
● Used engine oil contains potentially
harmful contaminants which may
cause skin disorders such as inflamma-
tion and skin cancer, so care should be
taken to avoid prolonged and
repeated contact. To remove used
engine oil from your skin, wash thor-
oughly with soap and water.
● Dispose of used oil and filters only in a
safe and acceptable manner. Do not
dispose of used oil and filters in house-
hold trash, in sewers or onto the
ground. Call your Lexus dealer, ser-
vice station or auto parts store for
information concerning recycling or
disposal.
● Do not leave used engine oil within the
reach of children.
NOTICE
■ When replacing the engine oil
● Be careful not to spill engine oil on the
vehicle components.
● Avoid overfilling, or the engine could
be damaged.
364
6-3. Do-it-yourself maintenance
The coolant level is satisfactory if it is
between the “MAX/F” and “MIN/L”
lines on the reservoir when the hybrid
system is cold.
■ Engine coolant reservoir
Reservoir cap
“MAX” line
“MIN” line
If the level is on or below the “MIN” line,
add coolant up to the “MAX” line.
(P.436)
■ Power control unit coolant reser-
voir
Reservoir cap
“F” line
“L” line
If the level is on or below the “L” line, add
coolant up to the “F” line.
■ Coolant selection
Only use “Toyota Super Long Life Coolant”
or a similar high quality ethylene glycol
based non-silicate, non-amine, non-nitrite,
and non-borate coolant with long-life
hybrid organic acid technology.
U.S.A.:
“Toyota Super Long Life Coolant” is a mix-
ture of 50% coolant and 50% deionized
water.
(Minimum temperature: -31°F [-35°C])
Canada:
“Toyota Super Long Life Coolant” is a mix-
ture of 55% coolant and 45% deionized
water.
(Minimum temperature: -44°F [-42°C])
For more details about coolant, contact
your Lexus dealer.
■ If the coolant level drops within a short
time of replenishing
Visually check the radiator, hoses,
engine/power control unit coolant reser-
voir caps, drain cock and water pump.
If you cannot find a leak, have your Lexus
dealer test the cap and check for leaks in
the cooling system.
NOTICE
● Check the oil level on the dipstick
every time you refill the vehicle.
● Be sure the engine oil filler cap is prop-
erly tightened.
Checking the coolant
A
B
C
WARNING
■ When the hybrid system is hot
Do not remove the engine/power con-
trol unit coolant reservoir caps.
The cooling system may be under pres-
sure and may spray hot coolant if the cap
is removed, causing serious injuries, such
as burns.
A
B
C
365
6-3. Do-it-yourself maintenance
6
Maintenance and care
Check the radiator and condenser and
clear away any foreign objects.
If either of the above parts is extremely
dirty or you are not sure of their condi-
tion, have your vehicle inspected by
your Lexus dealer.
■ Checking fluid level
The brake fluid level should be
between the “MAX” and “MIN” lines
on the tank.
■ Adding fluid
Make sure to check the fluid type and
prepare the necessary item.
Fluid type
FMVSS No.116 DOT 3 or SAE J1703
brake fluid
FMVSS No.116 DOT 4 or SAE J1704
brake fluid
Item
Clean funnel
■ Brake fluid can absorb moisture from
the air
Excess moisture in the brake fluid can
cause a dangerous loss of braking effi-
ciency. Use only newly opened brake fluid.
NOTICE
■ When adding coolant
Coolant is neither plain water nor
straight antifreeze. The correct mixture
of water and antifreeze must be used to
provide proper lubrication, corrosion
protection and cooling. Be sure to read
the antifreeze or coolant label.
■ If you spill coolant
Be sure to wash it off with water to pre-
vent it from damaging parts or paint.
Checking the radiator and con-
denser
WARNING
■ When the hybrid system is hot
Do not touch the radiator or condenser
as they may be hot and cause serious
injuries, such as burns.
■ When the electric cooling fans are
operating
Do not touch the engine compartment.
With the power switch in ON, the elec-
tric cooling fans may automatically start
to run if the air conditioning is on and/or
the coolant temperature is high. Be sure
the power switch is OFF when working
near the electric cooling fans or radiator
grille.
Checking and adding the brake
fluid
WARNING
■ When filling the reservoir
Take care as brake fluid can harm your
hands and eyes and damage painted sur-
faces.
If fluid gets on your hands or in your eyes,
flush the affected area with clean water
immediately.
If you still experience discomfort, see a
doctor.
366
6-3. Do-it-yourself maintenance
If any washer does not work or “Wind-
shield Washer Fluid Low” is shown on
the multi-information display, the
washer tank may be empty. Add
washer fluid.
NOTICE
■ If the fluid level is low or high
It is normal for the brake fluid level to go
down slightly as the brake pads wear out
or when the fluid level in the accumulator
is high.
If the reservoir needs frequent refilling,
there may be a serious problem.
Adding the washer fluid
WARNING
■ When adding washer fluid
Do not add washer fluid when the hybrid
system is hot or operating as washer fluid
contains alcohol and may catch fire if
spilled on the engine etc.
NOTICE
■ Do not use any fluid other than
washer fluid
Do not use soapy water or engine anti-
freeze instead of washer fluid.
Doing so may cause streaking on the
vehicle’s painted surfaces, as well as
damaging the pump leading to problems
of the washer fluid not spraying.
■ Diluting washer fluid
Dilute washer fluid with water as neces-
sary.
Refer to the freezing temperatures listed
on the label of the washer fluid bottle.
367
6-3. Do-it-yourself maintenance
6
Maintenance and care
The 12-volt battery is located in the left-
hand side of luggage compartment.
■ Before recharging
When recharging, the 12-volt battery pro-
duces hydrogen gas which is flammable
and explosive. Therefore, observe the fol-
lowing precautions before recharging:
● If recharging with the 12-volt battery
installed on the vehicle, be sure to dis-
connect the ground cable.
● Make sure the power switch on the char-
ger is off when connecting and discon-
necting the charger cables to the 12-volt
battery.
■ After recharging/reconnecting the 12-
volt battery
● Unlocking the doors using the smart
access system with push-button start may
not be possible immediately after recon-
necting the 12-volt battery. If this hap-
pens, use the wireless remote control or
the mechanical key to lock/unlock the
doors.
● Start the hybrid system with the power
switch in ACC. The hybrid system may
not start with the power switch turned off.
However, the hybrid system will operate
normally from the second attempt.
● The power switch mode is recorded by
the vehicle. If the 12-volt battery is recon-
nected, the vehicle will return the power
switch mode to the status it was in before
the 12-volt battery was disconnected.
Make sure to turn off the power switch
before disconnect the 12- volt battery.
Take extra care when connecting the 12-
volt battery if the power switch mode
prior to discharge is unknown.
If the system will not start even after multiple
attempts at all methods above, contact your
Lexus dealer.
12-volt battery
Location
WARNING
■ Chemicals in the 12-volt battery
The 12-volt battery contains poisonous
and corrosive sulfuric acid and may pro-
duce hydrogen gas which is flammable
and explosive. To reduce the risk of
death or serious injury, take the following
precautions while working on or near the
12-volt battery:
● Do not cause sparks by touching the
12-volt battery terminals with tools.
● Do not smoke or light a match near the
12-volt battery.
● Avoid contact with eyes, skin and
clothes.
● Never inhale or swallow electrolyte.
● Wear protective safety glasses when
working near the 12-volt battery.
● Keep children away from the 12-volt
battery.
■ Where to safely charge the 12-volt
battery
Always charge the 12-volt battery in an
open area. Do not charge the 12-volt
battery in a garage or closed room
where there is insufficient ventilation.
■ Emergency measures regarding
electrolyte
● If electrolyte gets in your eyes
Flush your eyes with clean water for at
least 15 minutes and get immediate
medical attention. If possible, continue
to apply water with a sponge or cloth
while traveling to the nearest medical
facility.
368
6-3. Do-it-yourself maintenance
1 Open the right side deck board.
(P.324)
2
Remove the right side deck board.
3
Remove the 12-volt battery cover.
Make sure that the 12-volt battery ter-
minals are not corroded and that there
are no loose connections, cracks, or
loose clamps.
Terminals
Hold-down clamp
Check the 12-volt battery condition by
indicator color.
WARNING
● If electrolyte gets on your skin
Wash the affected area thoroughly. If
you feel pain or burning, get medical
attention immediately.
● If electrolyte gets on your clothes
It can soak through clothing on to your
skin. Immediately take off the clothing
and follow the procedure above if nec-
essary.
● If you accidentally swallow electrolyte
Drink a large quantity of water or milk.
Get emergency medical attention
immediately.
■ When handling the 12-volt battery
P.435
NOTICE
■ When recharging the 12-volt battery
Never recharge the 12-volt battery while
the hybrid system is operating. Also, be
sure all accessories are turned off.
Removing the 12-volt battery
cover
Exterior
Checking 12-volt battery condi-
tion
A
B
369
6-3. Do-it-yourself maintenance
6
Maintenance and care
Blue: Good condition
Red: Charging is necessary.
Have the vehicle inspected by your Lexus
dealer.
Clear: Replacement is necessary.
Have the 12-volt battery checked by your
Lexus dealer.
1 Install the 12-volt battery cover.
2 Install the right side deck board.
Check if the treadwear indicators are
showing on the tires. Also check the
tires for uneven wear, such as exces-
sive wear on one side of the tread.
New tread
Worn tread
Treadwear indicator
The location of treadwear indicators is
shown by a “TWI” or “ ” mark, etc.,
molded into the sidewall of each tire.
Replace the tires if the treadwear indica-
tors are showing on a tire.
Installing the 12-volt battery
cover
A
B
C
Tires
Replace or rotate tires in accor-
dance with maintenance schedules
and treadwear.
Checking tires
A
B
C
370
6-3. Do-it-yourself maintenance
■ When to replace your vehicle’s tires
Tires should be replaced if:
● The treadwear indicators are showing on
a tire.
● You have tire damage such as cuts, splits,
cracks deep enough to expose the fabric,
and bulges indicating internal damage.
● A tire goes flat repeatedly or cannot be
properly repaired due to the size or loca-
tion of a cut or other damage.
If you are not sure, consult with your Lexus
dealer.
■ Tire life
Any tire over 6 years old must be checked
by a qualified technician even if it has sel-
dom or never been used or damage is not
obvious.
■ Maximum load of tire
Check that the maximum load of the
replacement tire is greater than 1/2 of the
Gross Axle Weight Ratings (GAWR) of
either the front axle or the rear axle, which-
ever is greater.
For the GAWR, see the Certification Label.
For the maximum load of the tire, see the
load limit at maximum cold tire inflation
pressure mentioned on the sidewall of the
tire. (P.451)
■ Tire types
● Summer tires
Summer tires are high-speed perfor-
mance tires best suited to highway driv-
ing under dry conditions. Since summer
tires do not have the same traction per-
formance as snow tires, summer tires are
inadequate for driving on snow-covered
or icy roads. For driving on snow-cov-
ered roads or icy roads, the use of snow
tires is recommended. When installing
snow tires, be sure to replace all four
tires.
● All season tires
All season tires are designed to provide
better traction in snow and to be ade-
quate for driving in most winter condi-
tions as well as for use year-round. All
season tires, however, do not have ade-
quate traction performance compared
with snow tires in heavy or loose snow.
Also, all season tires fall short in accelera-
tion and handling performance com-
pared with summer tires in highway
driving.
● Snow tires
For driving on snow-covered roads or icy
roads, we recommend using snow tires. If
you need snow tires, select tires of the
same size, construction and load capacity
as the originally installed tires. Since your
vehicle has radial tires as original equip-
ment, make sure your snow tires also
have radial construction. Do not install
studded tires without first checking local
regulations for possible restrictions.
Snow tires should be installed on all
wheels. (P.300)
■ If the tread on snow tires wears down
below 0.16 in. (4 mm)
The effectiveness of the tires as snow tires is
lost.
■ Replacing tires
Your vehicle may not be equipped with the
following tools and jack for replacing a tire.
In this case, when replacing tires with tires
that are not run-flat tires, purchase tools
and jack. Tools and jack can be purchased
at your Lexus dealer.
● Wheel nut wrench
● Jack
● Jack handle
371
6-3. Do-it-yourself maintenance
6
Maintenance and care
Rotate the tires in the order shown.
To equalize tire wear and extend tire life,
Lexus recommends that tire rotation is car-
ried out at the same interval as tire inspec-
tion.
Do not fail to initialize the tire pressure
warning system after tire rotation.
■ When rotating the tires
Make sure that the power switch is OFF. If
the tires are rotated while the power switch
is in ON, the tire position information will
not be updated.
If this accidentally occurs, either turn the
power switch to OFF and then to ON, or
initialize the tire pressure warning system
after checking that the tire pressure is prop-
erly adjusted.
When run-flat tires are installed, the
vehicle can be driven for a maximum of
100 miles (160 km) at a speed below
50 mph (80 km/h) after any tire goes
flat. (However, the vehicle speed may
not increase to near 50 mph [80
km/h] depending on weather or driv-
ing conditions.)
A run-flat tire has a mark on
the sidewall.
Make sure to replace the flat tire before
the vehicle has been driven for near 100
miles (160 km). Also, do not use a repaired
tire.
WARNING
■ When inspecting or replacing tires
Observe the following precautions to
prevent accidents.
Failure to do so may cause damage to
parts of the drivetrain as well as danger-
ous handling characteristics, which may
lead to an accident resulting in death or
serious injury.
● Do not mix tires of different makes,
models or tread patterns.
Also, do not mix tires of remarkably
different treadwear.
● Do not use tire sizes other than those
recommended by Lexus.
● Do not mix differently constructed
tires (radial, bias-belted or bias-ply
tires).
● Do not mix summer, all season and
snow tires.
● Do not use tires that have been used
on another vehicle.
Do not use tires if you do not know
how they were used previously.
NOTICE
■ Driving on rough roads
Take particular care when driving on
roads with loose surfaces or potholes.
These conditions may cause losses in tire
inflation pressure, reducing the cushion-
ing ability of the tires. In addition, driving
on rough roads may cause damage to
the tires themselves, as well as the vehi-
cle’s wheels and body.
Tire rotation
Run-flat tires
372
6-3. Do-it-yourself maintenance
■ Run-flat tires
● The run-flat tires are for only this vehicle.
Do not use the tires on other vehicles.
● Do not mix run-flat tires and normal tires.
● If non-genuine Lexus wheels are used, it
may be impossible to sufficiently demon-
strate the performance of run-flat tires.
Your vehicle is equipped with a tire
pressure warning system that uses tire
pressure warning valves and transmit-
ters to detect low tire inflation pressure
before serious problems arise.
The tire pressure warning system of
this vehicle adopts a 2-type warning
system. (P.411)
Multi-information display (vehicles with
7-inch multi-information display)
Multi-information display (vehicles with
12.3-inch multi-information display)
Center display
When “Adjust Pressure” is dis-
played on the multi-information dis-
play (Normal Warning)
A warning with the tire pressure warning
light and warning buzzer when there is an
unknown level of low tire pressure with the
appearance of the tire due to natural air
leakage as well as the pressure lowering
due to changes in the pressure according
to the outside temperature.
When “Immediately Check tire
when Safe” is displayed on the multi-
information display (Emergency
Warning)
A warning with the tire pressure warning
light and warning buzzer when there is a
known level of low tire pressure with the
appearance of the tire due to pressure
suddenly lowering.
However, the system may not be able to
detect sudden tire ruptures (bursting, etc.).
The tire pressure detected by the
tire pressure warning system can be
displayed on the center display.
(P.107)
■ Routine tire inflation pressure checks
The tire pressure warning system does not
replace routine tire inflation pressure
checks. Make sure to check tire inflation
pressure as part of your routine of daily
vehicle checks.
Tire pressure warning system
373
6-3. Do-it-yourself maintenance
6
Maintenance and care
■ Tire inflation pressure
● It may take a few minutes to display the
tire inflation pressure after the power
switch is turned to ON. It may also take a
few minutes to display the tire inflation
pressure after inflation pressure has been
adjusted.
● Tire inflation pressure changes with tem-
perature. The displayed values may also
be different from the values measured
using a tire pressure gauge.
■ Situations in which the tire pressure
warning system may not operate prop-
erly
● In the following cases, the tire pressure
warning system may not operate prop-
erly.
• If non-genuine Lexus wheels are used.
• A tire has been replaced with a tire that is
not an OE (Original Equipment) tire.
• A tire has been replaced with a tire that is
not of the specified size.
• Tire chains etc. are equipped.
• An auxiliary-supported run-flat tire is
equipped.
• If a window tint that affects the radio wave
signals is installed.
• If there is a lot of snow or ice on the vehi-
cle, particularly around the wheels or
wheel housings.
• If the tire inflation pressure is extremely
higher than the specified level.
• If wheels without tire pressure warning
valves and transmitters are used.
• If the ID code on the tire pressure warn-
ing valves and transmitters is not regis-
tered in the tire pressure warning
computer.
● Performance may be affected in the fol-
lowing situations.
• Near a TV tower, electric power plant,
gas station, radio station, large display,
airport or other facility that generates
strong radio waves or electrical noise
• When carrying a portable radio, cellular
phone, cordless phone or other wireless
communication device
If tire position information is not correctly
displayed due to the radio wave conditions,
the display may be corrected by driving and
changing the radio wave conditions.
● When the vehicle is parked, the time
taken for the warning to start or go off
could be extended.
● When tire inflation pressure declines rap-
idly for example when a tire has burst, the
warning may not function.
When replacing tires or wheels, tire
pressure warning valves and transmit-
ters must also be installed.
When new tire pressure warning valves
and transmitters are installed, new ID
codes must be registered in the tire pres-
sure warning computer. (P.377)
■ When replacing the tires and wheels
If the ID code of the tire pressure warning
valve and transmitter is not registered, the
tire pressure warning system will not work
properly. After driving for about 20 min-
utes, the tire pressure warning light blinks
for 1 minute and stays on to indicate a sys-
tem malfunction.
Installing tire pressure warning
valves and transmitters
NOTICE
■ Repairing or replacing tires, wheels,
tire pressure warning valves, trans-
mitters and tire valve caps
● When removing or fitting the wheels,
tires or the tire pressure warning
valves and transmitters, contact your
Lexus dealer as the tire pressure warn-
ing valves and transmitters may be
damaged if not handled correctly.
● Make sure to install the tire valve caps.
If the tire valve caps are not installed,
water could enter the tire pressure
warning valves and the tire pressure
warning valves could be bound.
● When replacing tire valve caps, do not
use tire valve caps other than those
specified. The cap may become stuck.
374
6-3. Do-it-yourself maintenance
■ When to register the position of
each wheel
It is necessary to register the position
of each wheel after performing a tire
rotation.
Wheel position registration can be
performed by oneself. Wheel position
registration is performed by driving
forward with moderate left and right
turns. However, depending on the
driving conditions and driving environ-
ment, registration may take some time
to complete.
■ Registering the position of each
wheel
1
Park the vehicle in a safe place, turn
the power switch off and wait 15
minutes or more.
2
Start the hybrid system.
The wheel position registration procedure
cannot be performed while the vehicle is
moving.
3 Select on the Center Display.
4
Select “Vehicle customize”.
5 Select “Tire pressure”.
6
Select “Tire rotation”.
7
Select “Continue”.
A message indicating that wheel position
registration is being performed will be dis-
played on the multi-information display. “--
-” will be displayed for the tire inflation
pressure of each tire and wheel position
registration will begin.
8 Drive straight (with occasional left
and right turns) at approximately
25 mph (40 km/h) or more for
approximately 10 to 30 minutes.
When wheel position registration is com-
plete, a message indicating that registra-
tion has been completed and the inflation
pressure of each tire will be displayed on
the multi-information display.
Even if it is not possible to drive continu-
ously at approximately 25 mph (40 km/h)
or more, registration can be completed by
driving for a long time. However, if regis-
tration does not complete after driving for 1
hour or more, park the vehicle in a safe
place and leave it with the power switch in
ON for approximately 15 minutes or more,
and then perform the driving procedure
again.
■ When performing wheel position regis-
tration
● Normally, wheel position registration can
be completed within approximately 30
minutes.
● Wheel position registration is performed
while driving at a vehicle speed of
approximately 25 mph (40 km/h) or
more.
■ Wheel position registration procedure
● If the power switch is turned off while reg-
istering the wheel position, the next time
the power switch is turned to ON, the
wheel position registration will resume
and it will not be necessary to restart the
procedure.
● While the position of each wheel is being
determined and the inflation pressures
NOTICE
■ To avoid damage to the tire pressure
warning valves and transmitters
When a tire is repaired with liquid seal-
ants, the tire pressure warning valve and
transmitter may not operate properly. If a
liquid sealant is used, contact your Lexus
dealer or other qualified service shop as
soon as possible. After use of liquid seal-
ant, make sure to replace the tire pres-
sure warning valve and transmitter when
repairing or replacing the tire.
Registering the position of each
wheel
375
6-3. Do-it-yourself maintenance
6
Maintenance and care
are not being displayed, if the inflation
pressure of a tire drops, the tire pressure
warning light will come on.
■ If the wheel position cannot be regis-
tered easily
● In the following situations, wheel position
registration may take longer than usual to
be completed or may not be possible.
• Vehicle is not driven at approximately 25
mph (40 km/h) or more
• Vehicle is driven on unpaved roads
● If wheel position registration does not
complete after driving for 1 hour or more,
park the vehicle in a safe place for
approximately 15 minutes and then drive
the vehicle again.
● If the vehicle is reversed during wheel
position registration, all data collected
until then will be cleared. Perform driving
again.
■ When you need to setting the tire
pressure
In the following situations, it will be nec-
essary to perform the tire inflation
pressure setting procedure of the tire
pressure warning system.
When the specified tire inflation
pressure has changed, such as due
to carried load, etc.
When the tire inflation pressure is
changed such as when the tire size
is changed.
If the tire inflation pressure has been
adjusted to the specified level, perform
the tire inflation setting procedure by
selecting specified inflation pressure
on the Center Display. (P.375)
When the tire inflation pressure is to be
other than specified, such as when tires
other than the specified size are used,
etc., set the tire inflation pressure using
the current pressure. Make sure to
adjust the tire inflation pressure of each
tire to the appropriate level before
performing tire pressure setting. The
tire pressure warning system operates
based on this tire inflation pressure.
(P.375)
■ Setting by selecting a specified tire
inflation pressure
1 Start the hybrid system.
The tire inflation pressure cannot be set
while the vehicle is moving.
2 Select on the Center Display.
3 Select “Vehicle customize”.
4 Select “Tire pressure”.
5 Select “Set indicated air pressure”
and then select the desired front
and rear tire pressures.
6 Select “OK”.
The tire pressure warning light will slowly
blink 3 times.
After setting the tire inflation pressure, a
message indicating that setting has been
completed will be displayed on the multi-
information display.
■ Setting using the current tire infla-
tion pressure
1 Adjust the tire inflation pressure of
each tire to the appropriate level.
Setting the tire pressure
376
6-3. Do-it-yourself maintenance
Make sure to adjust the tire inflation pres-
sure with the tires cold.
2 Start the hybrid system.
The tire inflation pressure cannot be set
while the vehicle is moving.
3 Select on the Center Display.
4
Select “Vehicle customize”.
5
Select “Tire pressure”.
6
Select “Set current air pressure”.
7
Select “Continue”.
The tire pressure warning light will slowly
blink 3 times and a message indicating that
tire inflation pressure is being set will be
displayed on the multi-information display.
After setting the tire inflation pressure, a
message indicating that setting has been
completed will be displayed on the multi-
information display.
■ Warning performance of the tire pres-
sure warning system (Setting using the
current tire inflation pressure)
● When performing the tire pressure set-
ting using the current tire inflation pres-
sure, the warning timing of the tire
pressure warning system will vary
according to the conditions under which
tire pressure setting was performed.
Therefore, a warning may be output even
if the tire inflation pressure drops slightly
or if the tire inflation pressure increases
above that when the tire inflation pres-
sure was set.
● Make sure to perform the tire pressure
setting procedure after adjusting the tire
inflation pressure. Also, make sure the
tires are cold before performing the tire
pressure setting procedure or adjusting
the tire inflation pressure.
■ Tire inflation pressure setting proce-
dure (Setting using the current tire infla-
tion pressure)
● If the power switch is turned off while set-
ting the tire inflation pressure, the next
time the power switch is turned to ON,
the setting procedure will resume and it
will not be necessary to restart the proce-
dure.
● If the tire inflation pressure setting proce-
dure is started unnecessarily, adjust the
tire inflation pressure to the specified
level with the tires cold and then perform
setting by selecting a specified tire infla-
tion pressure, or perform the tire inflation
pressure setting procedure with the cur-
rent tire inflation pressure.
■ If the tire inflation pressure cannot be
set easily
● Normally, it takes approximately 3 min-
utes to complete the setting procedure to
the current tire inflation pressure.
● If the tire pressure warning light does not
blink 3 times when starting the tire infla-
tion pressure setting procedure, the pro-
cedure may not have started. Perform
the procedure again from the beginning.
● If tire inflation pressure setting procedure
cannot be completed after performing
the above procedure, contact your Lexus
dealer.
WARNING
■ When setting using the current tire
inflation pressure
Make sure to adjust the tire inflation
pressure of each tire to the appropriate
level before performing tire pressure
setting. Otherwise, the tire pressure
warning light may not illuminate even if
the tire inflation pressure drops or may
illuminate even though the tire inflation
pressure is normal.
377
6-3. Do-it-yourself maintenance
6
Maintenance and care
■ When to register ID codes
The tire pressure warning valve and
transmitter is equipped with a unique
ID code. When new tire pressure
warning valves and transmitters are
installed, new ID codes must be regis-
tered in the tire pressure warning com-
puter.
■ How to registration ID code
Before performing ID code registra-
tion, make sure that no wheels with tire
pressure warning valve and transmit-
ters installed are near the vehicle.
1 Park the vehicle in a safe place, turn
the power switch off and wait 15
minutes or more.
2 Start the hybrid system.
The ID code registration procedure can-
not be performed while the vehicle is mov-
ing.
3 Select on the Center Display.
4 Select “Vehicle customize”.
5 Select “Tire pressure”.
6 Check if the desired wheel set (“Set
1” or “Set 2”) is displayed.
ID codes will be registered to the displayed
wheel set.
To change the wheel set to be registered,
select the displayed set, and then select the
wheel set you wish to register.
If ID codes have already been registered
for that wheel set, the tire pressure warning
light will slowly blink 3 times, and a mes-
sage indicating that change is occurring
will be displayed on the multi-information
display.
7 Select “New tire registration”.
8 Select “Continue”.
The tire pressure warning light will slowly
blink 3 times and a message indicating that
ID code registration is being performed
will be displayed on the multi-information
display. Wheel set changing will be can-
celed and registration will begin.
When registration is being performed, the
tire pressure warning light will blink for
approximately 1 minute then illuminate and
“---” will be displayed for the inflation pres-
sure of each tire on the multi-information
display.
9 Drive straight (with occasional left
and right turns) at approximately
25 mph (40 km/h) or more for
approximately 10 to 30 minutes.
When registration is complete, the tire
pressure warning light will turn off and a
message indicating that registration has
been completed will be displayed on the
multi-information display.
Registration may take longer than normal
to complete if the vehicle speed cannot be
Registering ID codes
378
6-3. Do-it-yourself maintenance
maintained at approximately 25 mph (40
km/h) or more. If registration cannot be
completed after driving for 1 hour or more,
perform the registration procedure again
from the beginning.
10 If the tire inflation pressure of the
wheel set installed differs from that
of the previous set, it will be neces-
sary to perform the tire inflation
pressure setting procedure of the
tire pressure warning system.
(P.375)
If the specified tire inflation pressure is the
same, it will not be necessary to perform
the tire inflation pressure setting proce-
dure.
■ When registering ID codes
● Normally, wheel position registration can
be completed within approximately 30
minutes.
● ID code registration is performed while
driving at a vehicle speed of approxi-
mately 25 mph (40 km/h) or more.
● ID codes can be registered by yourself,
but depending on the driving conditions
and driving environment, registration
may take some time to complete.
● When using a wheel set which all of the
ID codes have already been registered,
the wheel set can be changed in a short
amount of time. (P.378)
■ If ID codes are not registered easily
● In the following situations, ID code regis-
tration may take longer than usual to be
completed or may not be possible.
• When the vehicle has not been parked
for approximately 15 minutes or more
before being driven
• Vehicle is not driven at approximately 25
mph (40 km/h) or more
• Vehicle is driven on unpaved roads
• Vehicle is driven near other vehicles and
system cannot recognize tire pressure
warning valve and transmitters of your
vehicle over those of other vehicles
• Wheel with tire pressure warning valve
and transmitter installed is inside or near
the vehicle
● If the vehicle is reversed during registra-
tion, all data collected until then will be
cleared. Perform driving again.
● If registration does not complete after
driving for 1 hour or more, perform the ID
code registration procedure again from
the beginning.
● If the tire pressure warning light does not
blink 3 times when starting ID code reg-
istration procedure, the procedure may
not have started. Perform the procedure
again from the beginning.
● If the ID codes cannot be registered even
when performing the above procedure,
contact your Lexus dealer.
To cancel ID code registration after it
has been started, select “New tire reg-
istration” again on the Center Display.
If ID code registration has been canceled,
the tire pressure warning light will turn off.
If the warning light does not turn off, ID
code registration may not have been can-
celled correctly. To cancel registration,
select “New tire registration” again on the
Center Display.
Your vehicle is equipped with a tire
pressure warning system with a func-
tion to register two sets of ID codes.
This allows for registration of a second
wheel set, for example a winter set.
The wheel set can be changed only
if a second wheel set has been reg-
istered to the system. If a second
wheel set has not been registered,
“Set 2 (Unregistered)” will be dis-
played and it will not be possible to
Canceling ID code registration
Selecting wheel set
379
6-3. Do-it-yourself maintenance
6
Maintenance and care
change to the selected wheel set.
ID codes can be registered by yourself.
(P.377)
Only a change between both regis-
tered wheel set is possible, mixing
between these wheel sets is not sup-
ported.
While registering ID codes, it may
not be possible to change between
wheel sets normally. Cancel regis-
tration before changing between
wheel sets.
■ Changing ID codes between dif-
ferent wheel sets
1 Install the desired wheel set.
2 Select on the Center Display.
3 Select “Vehicle customize”.
4 Select “Tire pressure”.
5 Select the wheel set (“Set 1” or “Set
2”) displayed for the set selection
setting.
6 Select the wheel set you wish to
register, and then select “OK”.
The tire pressure warning light will slowly
blink 3 times, a message indicating that
change is occurring will be displayed, and
the wheel set change will begin.
Wheel set change will begin and the tire
pressure warning light will blink for 1 min-
ute and then illuminate. Also, while the
change is being performed, “---” will be
displayed for the tire inflation pressure of
each tire on the multi-information display.
After approximately 2 minutes, the wheel
set change will complete, the tire pressure
warning light will turn off, and a completion
message will be displayed on the multi-
information display.
If changing does not complete after
approximately 4 minutes, a message indi-
cating that the change could not be com-
pleted will be displayed.
Check which wheel set is installed and per-
form the change procedure again from the
beginning.
7 If the specified tire inflation pres-
sure of the wheel set installed dif-
fers from that of the previous set, it
will be necessary to perform the
tire inflation pressure setting pro-
cedure of the tire pressure warning
system. (P.375)
If the specified tire inflation pressure is the
same, it will not be necessary to perform
the tire inflation pressure setting proce-
dure.
8 Register the position of each wheel.
(P.374)
380
6-3. Do-it-yourself maintenance
Stop the vehicle in a safe place on a
hard, flat surface.
Set the parking brake.
Shift the shift lever to P.
Stop the hybrid system.
2WD models
Towing eyelet
Jack
*
/Jack handle
*
/Wheel nut wrench
*
*
: They can be purchased at your Lexus dealer.
Replacing the tire
When replacing the tires yourself,
prepare the necessary tools and a
jack.
If necessary tire replacement
seems difficult to perform, contact
your Lexus dealer.
Before jacking up the vehicle
Location of the jack and tools
A
B
381
6-3. Do-it-yourself maintenance
6
Maintenance and care
AWD models
Towing eyelet
Jack
*
/Jack handle
*
/Wheel nut wrench
*
*
: They can be purchased at your Lexus dealer.
A
B
WARNING
■ Using the tire jack
Observe the following precautions.
Improper use of the tire jack may cause
the vehicle to suddenly fall off the jack,
leading to death or serious injury.
● Do not use the tire jack for any pur-
pose other than replacing tires or
installing and removing tire chains.
● Only use the tire jack that comes with
this vehicle for replacing a flat tire. Do
not use it on other vehicles, and do not
use other tire jacks for replacing tires
on this vehicle.
● Put the jack properly in its jack point.
● Do not put any part of your body under
the vehicle while it is supported by the
jack.
● Do not start the hybrid system or drive
the vehicle while the vehicle is sup-
ported by the jack.
● Do not raise the vehicle while some-
one is inside.
● When raising the vehicle, do not put an
object on or under the jack.
● Do not raise the vehicle to a height
greater than that required to replace
the tire.
● Use a jack stand if it is necessary to get
under the vehicle.
● When lowering the vehicle, make sure
that there is no-one near the vehicle. If
there are people nearby, warn them
vocally before lowering.
382
6-3. Do-it-yourself maintenance
1 Chock the tires.
2 Slightly loosen the wheel nuts (one
turn).
3 Turn the tire jack portion by
hand until the notch of the jack is in
contact with the jack point.
The jack point guides are located under
the rocker panel. They indicate the jack
point positions.
4 Install the wheel nut wrench in jack
handle.
5 Raise the vehicle until the tire is
slightly raised off the ground.
6 Remove all the wheel nuts and the
tire.
When resting the tire on the ground, place
the tire so that the wheel design faces up to
Removing a tire
Tire Wheel chock positions
Front left-hand
side
Behind the rear right-
hand side tire
Front right-hand
side
Behind the rear left-
hand side tire
Rear left-hand
side
In front of the front
right-hand side tire
Rear right-hand
side
In front of the front left-
hand side tire
A
383
6-3. Do-it-yourself maintenance
6
Maintenance and care
avoid scratching the wheel surface.
1 Remove any dirt or foreign matter
from the wheel contact surface.
If foreign matter is on the wheel contact
surface, the wheel nuts may loosen while
the vehicle is in motion, causing the tire to
come off.
2 Install the tire and loosely tighten
each wheel nut by hand by approxi-
mately the same amount.
Turn the wheel nuts until the washers come
into contact with the disc wheel.
Disc wheel
Washer
3 Lower the vehicle.
4
Securely tighten the wheel nuts two
or three times in the order shown in
the illustration using a wheel nut
wrench.
WARNING
■ Replacing a tire
Do not touch the disc wheels or the area
around the brakes immediately after the
vehicle has been driven.
After the vehicle has been driven the disc
wheels and the area around the brakes
will be extremely hot. Touching these
areas with hands, feet or other body
parts while changing a tire, etc. may
result in burns.
■ Replacing a tire for vehicles with
power back door
In cases such as when replacing tires,
make sure to cancel the power back
door system (P.137). Failure to do so
may cause the back door to operate
unintentionally if the power back door
switch is accidentally touched, resulting
in hands and fingers being caught and
injured.
Installing the tire
A
B
384
6-3. Do-it-yourself maintenance
Tightening torque:
76 ft•lbf (103 N•m, 10.5 kgf•m)
5
Stow the tire jack and all tools.
WARNING
■ When installing the tire
Failure to follow these precautions could
cause the wheel nuts to loosen and the
tire to fall off, resulting in death or serious
injury.
● Never use oil or grease on the wheel
bolts or wheel nuts.
Oil and grease may cause the wheel
nuts to be excessively tightened, lead-
ing to bolt or disc wheel damage.
Remove any oil or grease that has
adhered when installing the wheel
nuts.
● Have the wheel nuts tightened with a
torque wrench to 76 ft•lbf (103 N•m,
10.5 kgf•m) as soon as possible after
changing wheels.
● After replacing a tire, check the tight-
ening torque as soon as possible. If you
cannot confirm the tightening torque
yourself, have the vehicle inspected at
your Lexus dealer.
● Do not attach a heavily damaged
wheel ornament, as it may fly off the
wheel while the vehicle is moving.
● When installing a tire, only use wheel
nuts that have been specifically
designed for that wheel.
● If there are any cracks or deformations
in the bolt screws, nut threads or bolt
holes of the wheel, have the vehicle
inspected by your Lexus dealer.
● Do not attach a heavily damaged
wheel ornament, as it may fly off the
wheel while the vehicle is moving.
■ After using the tools and jack (if
equipped)
Before driving, make sure all the tools
and jack are stored securely in place.
Failure to do so may cause injury in case
of a collision or sudden braking.
NOTICE
■ Repairing or replacing tires, wheels,
tire pressure warning valves, trans-
mitters and tire valve caps
P.373
385
6-3. Do-it-yourself maintenance
6
Maintenance and care
The recommended cold tire inflation
pressure and tire size are displayed on
the tire and loading information label.
(P.447)
Tire valve
Tire pressure gauge
1 Remove the tire valve cap.
2 Press the tip of the tire pressure
gauge onto the tire valve.
3 Read the pressure using the gauge
gradations.
4 If the tire inflation pressure is not at
the recommended level, adjust the
pressure.
If you add too much air, press the
center of the valve to deflate.
5 After completing the tire inflation
pressure measurement and adjust-
ment, apply soapy water to the
valve and check for leakage.
6 Put the tire valve cap back on.
■ Tire inflation pressure check interval
You should check tire inflation pressure
every two weeks, or at least once a month.
Do not forget to check the spare.
■ Effects of incorrect tire inflation pres-
sure
Driving with incorrect tire inflation pressure
may result in the following:
● Reduced fuel economy
● Reduced driving comfort and poor han-
dling
● Reduced tire life due to wear
● Reduced safety
● Damage to the drive train
If a tire needs frequent inflating, have it
checked by your Lexus dealer.
■ Instructions for checking tire inflation
pressure
When checking tire inflation pressure,
observe the following:
● Check only when the tires are cold.
If your vehicle has been parked for at
least 3 hours or has not been driven for
Tire inflation pressure
Checking the specified tire infla-
tion pressure
Inspection and adjustment pro-
cedure
A
B
386
6-3. Do-it-yourself maintenance
more than 1 mile or 1.5 km, you will get an
accurate cold tire inflation pressure read-
ing.
● Always use a tire pressure gauge.
It is difficult to judge if a tire is properly
inflated based only on its appearance.
● It is normal for the tire inflation pressure
to be higher after driving as heat is gener-
ated in the tire. Do not reduce tire infla-
tion pressure after driving.
● Never exceed the vehicle capacity
weight.
Passengers and luggage weight should
be placed so that the vehicle is balanced.
WARNING
■ Proper inflation is critical to save tire
performance
Keep your tires properly inflated.
If the tires are not properly inflated, the
following conditions may occur which
could lead to an accident resulting in
death or serious injury:
● Excessive wear
● Uneven wear
● Poor handling
● Possibility of blowouts resulting from
overheated tires
● Air leaking from between tire and
wheel
● Wheel deformation and/or tire dam-
age
● Greater possibility of tire damage
while driving (due to road hazards,
expansion joints, sharp edges in the
road, etc.)
NOTICE
■ When inspecting and adjusting tire
inflation pressure
Be sure to put the tire valve caps back
on.
If a valve cap is not installed, dirt or mois-
ture may get into the valve and cause an
air leak, resulting in decreased tire infla-
tion pressure.
387
6-3. Do-it-yourself maintenance
6
Maintenance and care
When replacing wheels, care should
be taken to ensure that they are equiv-
alent to those removed in load capac-
ity, diameter, rim width and inset
*
.
Replacement wheels are available at
your Lexus dealer.
*
: Conventionally referred to as offset.
Lexus does not recommend using the
following:
Wheels of different sizes or types
Used wheels
Bent wheels that have been
straightened
■ When replacing wheels
The wheels of your vehicle are equipped
with tire pressure warning valves and trans-
mitters that allow the tire pressure warning
system to provide advance warning in the
event of a loss in tire inflation pressure.
Whenever wheels are replaced, tire pres-
sure warning valves and transmitters must
be installed. (P.373)
Use only Lexus wheel nuts and
wrenches designed for use with
your aluminum wheels.
When rotating, repairing or chang-
ing your tires, check that the wheel
nuts are still tight after driving 1000
miles (1600 km).
Be careful not to damage the alumi-
num wheels when using tire chains.
Use only Lexus genuine balance
weights or equivalent and a plastic
or rubber hammer when balancing
your wheels.
Wheels
If a wheel is bent, cracked or heav-
ily corroded, it should be replaced.
Otherwise, the tire may separate
from the wheel or cause a loss of
handling control.
Wheel selection
WARNING
■ When replacing wheels
● Do not use wheels that are a different
size from those recommended in the
Owner’s Manual, as this may result in a
loss of handling control.
● Never use an inner tube in a leaking
wheel which is designed for a tubeless
tire. Doing so may result in an acci-
dent, causing death or serious injury.
■ Use of defective wheels prohibited
Do not use cracked or deformed wheels.
Doing so could cause the tire to leak air
during driving, possibly causing an acci-
dent.
NOTICE
■ Replacing tire pressure warning
valves and transmitters
● Because tire repair or replacement
may affect the tire pressure warning
valves and transmitters, make sure to
have tires serviced by your Lexus
dealer or other qualified service shop.
In addition, make sure to purchase
your tire pressure warning valves and
transmitters at your Lexus dealer.
● Ensure that only genuine Lexus wheels
are used on your vehicle.
Tire pressure warning valves and
transmitters may not work properly
with non-genuine wheels.
Aluminum wheel precautions
388
6-3. Do-it-yourself maintenance
1 Turn the power switch off.
2 Open the glove box. Remove the
partition. (P.321)
3 Remove the panel.
4 Unlock the filter cover ( ), pull
the filter cover out of the claws
( ), and remove the filter cover.
5 Remove the filter case.
6 Remove the air conditioning filter
from the filter case and replace it
with a new one.
The “ UP” marks shown on the filter and
the filter case should be pointing up.
■ Checking interval
Inspect and replace the air conditioning fil-
ter according to the maintenance schedule.
In dusty areas or areas with heavy traffic
flow, early replacement may be required.
(For scheduled maintenance information,
please refer to the “Owner’s Manual Sup-
plement” or “Scheduled Maintenance”.)
■ If air flow from the vents decreases dra-
matically
The filter may be clogged. Check the filter
and replace if necessary.
■ Air conditioning filter with deodorizing
function
When fragrances are placed in your vehi-
cle, the deodorizing effect may become sig-
nificantly weakened in a short period.
When an air conditioning odor comes out
continuously, replace the air conditioning
Air conditioning filter
The air conditioning filter must be
changed regularly to maintain air
conditioning efficiency.
Removing the air conditioning
filter
A
B
389
6-3. Do-it-yourself maintenance
6
Maintenance and care
filter.
■ Scheduled maintenance of the air
intake vent is necessary when
In some situations such as when the vehicle
is used frequently or in heavy traffic or dusty
areas, the air intake vent may need to be
cleaned more regularly. For details, refer to
the “Warranty and Service Guide”,
“Owner’s Manual Supplement” or “Sched-
uled Maintenance”.
■ Cleaning the air intake vent
Improper handling of the air intake vent
cover and filter may result in damage to
them. If you have any concerns about clean-
ing the filter, contact your Lexus dealer.
NOTICE
■ When using the air conditioning sys-
tem
Make sure that a filter is always installed.
Using the air conditioning system with-
out a filter may cause damage to the sys-
tem.
■ To prevent damage to the filter cover
When moving the filter cover in the
direction of arrow to release the fitting,
pay attention not to apply excessive
force to the claws. Otherwise, the claws
may be damaged.
Cleaning the hybrid battery
(
traction battery) air intake
v
ent
To prevent the fuel economy from
being affected, visually inspect the
hybrid battery (traction battery) air
intake vent periodically for clogs.
If it is dusty or clogged or if “Main-
tenance Required for Traction Bat-
tery Cooling Parts See Owner’s
Manual” is displayed on the multi-
information display, clean the air
intake vent using the following pro-
cedures:
NOTICE
■ If “Maintenance Required for Trac-
tion Battery Cooling Parts See
Owner’s Manual” is displayed on the
multi-information display
Clean the air intake vent immediately.
If the vehicle is continuously driven with
the warning message displayed, it may
cause a malfunction or output restriction
of the hybrid battery (traction battery).
390
6-3. Do-it-yourself maintenance
1 Turn the power switch off.
2 Remove the air intake vent cover
using a flathead screwdriver.
To protect the cover, place a rag between
the flathead screwdriver and the cover.
1 Pull the cover as shown in the illus-
tration to disengage the claw.
2 Disengage the 5 claws as shown in
the illustration.
3 Pull the cover toward the front of
the vehicle to remove it.
3 Remove the filter from the air
intake vent cover.
If dust has accumulated on the air intake
vent cover, remove the dust with a vacuum
cleaner, etc.
1 Disengage the claws as shown in
the illustration.
2 Disengage the claws as shown in
the illustration and remove the filter
from the cover.
4 Remove the dust and sand from the
filter.
Using a vacuum cleaner, etc., absorb dust
and sand from the filter by profiling the
nozzle lightly along the fold.
5 Hold the filter to the light and check
if it is not clogged.
If the dust or sand cannot be removed
completely, contact your Lexus dealer.
Cleaning procedure
391
6-3. Do-it-yourself maintenance
6
Maintenance and care
6 Reinstall the filter to the cover.
1
Engage the filter to the 2 claws as
shown in the illustration.
2
Engage the claws to install the filter.
Make sure that the filter is not crooked or
deformed when installing it.
7 Install the air intake vent cover.
1
Insert the tab of the cover as shown
in the illustration.
2
Push the cover to engage the 5
claws.
3
Engage the claw as shown in the
illustration.
If “Maintenance Required for Trac-
tion Battery Cooling Parts See
Owner’s Manual” is displayed on
the multi-information display
8
Start the hybrid system and check
that the warning message is no lon-
ger displayed.
It may be necessary to drive the vehicle for
approximately 20 minutes before the
warning message is displayed again then
disappears.
If the warning message does not disappear
after some time, have the vehicle inspected
by your Lexus dealer.
■ If the dust or sand on the filter cannot be
removed
It is recommended to use a vacuum cleaner
with plastic brushes.
WARNING
■ When cleaning the air intake vent
● Do not use water or other liquids to
clean the air intake vent. If water is
applied to the hybrid battery (traction
battery) or other components, a mal-
function or fire may occur.
● Before cleaning the air intake vent,
make sure to turn the power switch off
to stop the hybrid system.
● Do not put a hand or leg in the air
intake vent. If it is caught in a cooling
fan, or if it touches a high voltage part
that results in an electric shock, death
or serious injuries may result.
392
6-3. Do-it-yourself maintenance
■ If the electronic key battery is depleted
The following symptoms may occur:
● The smart access system with push-but-
ton start and wireless remote control will
not function properly.
● The operational range will be reduced.
■ When the card key battery needs to be
replaced (if equipped)
The battery for the card key is available only
at Lexus dealers. Your Lexus dealer can
replace the battery for you.
Prepare the following before replacing
the battery:
Flathead screwdriver
Small flathead screwdriver
Lithium battery CR2032
■ Use a CR2032 lithium battery
● Batteries can be purchased at your Lexus
dealer, local electrical appliance shops or
camera stores.
● Replace only with the same or equivalent
type recommended by the manufacturer.
● Dispose of used batteries according to
the local laws.
NOTICE
■ When cleaning the air intake vent
Do not use an air blow gun, etc.
Dust may be blown out, possibly causing
a malfunction or output restriction of the
hybrid battery (traction battery).
■ To prevent damage to the vehicle
Observe the following precautions:
● Do not allow water or foreign matter
to enter the air intake vent.
● Make sure to reinstall the filter and
cover to their original positions after
cleaning.
● Do not install anything to the air intake
vent other than the exclusive filter for
this vehicle or use the vehicle without
the filter installed.
■ To prevent damage to the filter
Observe the following precautions.
If the filter is damaged, have it replaced
with a new filter by your Lexus dealer.
● Do not use an air blow gun, etc.
● Do not press hard a vacuum cleaner,
etc. against the filter.
● Do not use a hard brush, such as a
metal brush.
● Do not break the fold of the filter.
Electronic key battery
Replace the battery with a new one
if it is depleted.
As the key may be damaged if the
following procedure is not per-
formed properly, it is recom-
mended that key battery
replacement be performed by your
Lexus dealer.
Items to prepare
393
6-3. Do-it-yourself maintenance
6
Maintenance and care
1 Take out the mechanical key.
2
Remove the cover.
To prevent damage to the key, cover the
tip of the flathead screwdriver with a tape.
3 Remove the depleted battery using
the small flathead screwdriver.
Insert a new battery with the “+” terminal
facing up.
Replacing the battery
WARNING
■ Battery precautions
Observe the following precautions.
Failure to do so may result in death or
serious injury.
● Do not swallow the battery. Doing so
may cause chemical burns.
● A coin battery or button battery is
used in the electronic key. If a battery
is swallowed, it may cause severe
chemical burns in as little as 2 hours
and may result in death or serious
injury.
● Keep away new and removed batter-
ies from children.
● If the cover cannot be firmly closed,
stop using the electronic key and stow
the key in the place where children
cannot reach, and then contact your
Lexus dealer.
● If you accidentally swallow a battery or
put a battery into a part of your body,
get emergency medical attention
immediately.
■ To prevent battery explosion or leak-
age of flammable liquid or gas
● Replace the battery with a new battery
of the same type. If a wrong type of
battery is used, it may explode.
● Do not expose batteries to extremely
low pressure due to high altitude or
extremely high temperatures.
● Do not burn, break or cut a battery.
NOTICE
■ When replacing the battery
Use a screwdriver of appropriate size.
Applying excessive force may deform or
damage the cover.
394
6-3. Do-it-yourself maintenance
1 Turn the power switch off.
2
Open the fuse box cover.
Engine compartment: type A fuse
box
Push the tab in and lift the lid off.
Engine compartment: type B fuse
box
Push the tab in and lift the lid off.
Left side instrument panel
Remove the lid.
NOTICE
■ For normal operation after replacing
the battery
Observe the following precautions to
prevent accidents:
● Always work with dry hands.
Moisture may cause the battery to
rust.
● Do not touch or move any other com-
ponent inside the remote control.
● Do not bend either of the battery ter-
minals.
Checking and replacing
f
uses
If any of the electrical components
do not operate, a fuse may have
blown. If this happens, check and
replace the fuses as necessary.
Checking and replacing fuses
395
6-3. Do-it-yourself maintenance
6
Maintenance and care
3 Remove the fuse.
Only type A fuse can be removed using
the pullout tool.
4 Check if the fuse is blown.
Replace the blown fuse with a new fuse of
an appropriate amperage rating. The
amperage rating can be found on the fuse
box lid.
Type A
Normal fuse
Blown fuse
Type B
Normal fuse
Blown fuse
■ After a fuse is replaced
● When installing the lid, make sure that the
tab is installed securely.
● If the lights do not turn on even after the
fuse has been replaced, a bulb may need
replacement. (P.398)
● If the replaced fuse blows again, have the
vehicle inspected by your Lexus dealer.
■ If there is an overload in a circuit
The fuses are designed to blow, protecting
the wiring harness from damage.
■ When replacing light bulbs
Lexus recommends that you use genuine
Lexus products designed for this vehicle.
Because certain bulbs are connected to cir-
cuits designed to prevent overload, non-
genuine parts or parts not designed for this
vehicle may be unusable.
A
B
WARNING
■ To prevent system breakdowns and
vehicle fire
Observe the following precautions.
Failure to do so may cause damage to
the vehicle, and possibly a fire or injury.
● Never use a fuse of a higher amperage
rating than that indicated, or use any
other object in place of a fuse.
A
B
396
6-3. Do-it-yourself maintenance
Single-beam headlights
Adjustment bolt A
Adjustment bolt B
Triple-beam headlights
Adjustment bolt A
Adjustment bolt B
Make sure the vehicle has a full tank
of gasoline and the area around the
headlight is not deformed.
Park the vehicle on level ground.
Make sure the tire inflation pressure
WARNING
● Always use a genuine Lexus fuse or
equivalent.
Never replace a fuse with a wire, even
as a temporary fix.
● Do not modify the fuses or fuse boxes.
■ Fuse box near the power control unit
Never check or replace the fuses as
there are high voltage parts and wiring
near the fuse box.
Doing so may cause electric shock,
resulting in death or serious injury.
NOTICE
■ Before replacing fuses
Have the cause of electrical overload
determined and repaired by your Lexus
dealer as soon as possible.
Headlight aim
Vertical movement adjusting
bolts
Before checking the headlight
aim
A
B
A
B
397
6-3. Do-it-yourself maintenance
6
Maintenance and care
is at the specified level.
Have someone sit in the driver’s
seat.
Bounce the vehicle several times.
1 Using a Phillips-head screwdriver,
turn bolt A in either direction.
Remember the turning direction
and the number of turns.
Single-beam headlights
Triple-beam headlights
2 Turn bolt B the same number of
turns and in the same direction as
step
1.
If the headlight cannot be adjusted using
this procedure, take the vehicle to your
Lexus dealer to adjust the headlight aim.
Single-beam headlights
Triple-beam headlights
Adjusting the headlight aim
398
6-3. Do-it-yourself maintenance
Front turn signal light (vehicles with
single-beam headlights)
■ Bulbs that need to be replaced by
your Lexus dealer
Headlights
Parking lights and daytime running
lights
Front turn signal lights (vehicles with
triple-beam headlights)
Fog lights (if equipped)
Cornering lights (if equipped)
Side turn signal lights
Tail lights
Stop lights
Tail lights/stop lights
Rear turn signal lights
Back-up lights
High mounted stoplight
License plate lights
Side marker lights
■ LED lights
Vehicles with single-beam headlights:
The lights other than the front turn signal
light each consist of a number of LEDs. If
any of the LEDs burn out, take your vehicle
to your Lexus dealer to have the light
replaced.
Vehicles with triple-beam headlights:
The lights consist of a number of LEDs. If
any of the LEDs burn out, take your vehicle
to your Lexus dealer to have the light
replaced.
■ Condensation build-up on the inside of
the lens
Temporary condensation build-up on the
inside of the headlight lens does not indi-
cate a malfunction. Contact your Lexus
dealer for more information in the following
situations:
● Large drops of water have built up on the
inside of the lens.
● Water has built up inside the headlight.
■ When replacing light bulbs
P.395
Light bulbs
You may replace the following bulb
by yourself. Before replacing,
check the wattage of the light bulb
to be replaced. As there is a danger
that components may be damaged,
we recommend that replacement is
carried out by your Lexus dealer.
Bulb location
A
399
6-3. Do-it-yourself maintenance
6
Maintenance and care
■ Front turn signal lights (vehicles
with single-beam headlights)
1
Turn the bulb base counterclock-
wise.
2
Remove the light bulb.
3
When installing, reverse the steps
listed.
Replacing light bulb
WARNING
■ Replacing light bulb
● Turn off the light. Do not attempt to
replace the bulb immediately after
turning off the light.
The bulb become very hot and may
cause burns.
● Do not touch the glass portion of the
light bulb with bare hands. When it is
unavoidable to hold the glass portion,
use and hold with a clean dry cloth to
avoid getting moisture and oils on the
bulb.
Also, if the bulb is scratched or
dropped, it may blow out or crack.
● Fully install light bulb and any parts
used to secure it. Failure to do so may
result in heat damage, fire, or water
entering the light unit. This may dam-
age the light or cause condensation to
build up on the lens.
■ To prevent damage or fire
● Make sure bulb is fully seated and
locked.
● Check the wattage of the bulb before
installing to prevent heat damage.
400
6-3. Do-it-yourself maintenance

Related Topics

Popular Owner Manuals