2014-2018 Mazda 3 4 Door Interior Features User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Interior Features for Your Mazda 3 4 Door Third Generation (2014-2018)

Interior Features  
5
Use of various features for ride comfort, including air-conditioning and  
audio system.  
Climate Control System..................................................................... 5-2  
Operating Tips............................................................................... 5-2  
Vent Operation .............................................................................. 5-3  
Manual Climate Control ............................................................... 5-5  
Automatic Climate Control........................................................... 5-9  
Dual-Zone Automatic Climate Control....................................... 5-12  
Audio System.................................................................................... 5-16  
Antenna....................................................................................... 5-16  
Operating Tips for Audio System ............................................... 5-17  
Audio Set (Type A) ..................................................................... 5-26  
Audio Set (Type B) ..................................................................... 5-38  
Audio Control Switch Operation* ............................................... 5-57  
AUX/USB/iPod mode................................................................. 5-59  
Bluetooth® ......................................................................................... 5-77  
Bluetooth®*.................................................................................. 5-77  
Bluetooth® Hands-Free (Type A)* ............................................... 5-99  
Bluetooth® Hands-Free (Type B)* ............................................. 5-105  
Bluetooth® Audio (Type A)*...................................................... 5-115  
Bluetooth® Audio (Type B)*...................................................... 5-117  
Troubleshooting* ....................................................................... 5-131  
Interior Equipment........................................................................ 5-134  
Sunvisors................................................................................... 5-134  
Interior Lights ........................................................................... 5-135  
Accessory Sockets .................................................................... 5-137  
Cup Holder................................................................................ 5-138  
Bottle Holder............................................................................. 5-139  
Storage Compartments.............................................................. 5-140  
*Some models.  
5
–1  
Interior Features  
Climate Control System  
ꢀyꢀ  
Have the air conditioner checked before  
Operating Tips  
Operate the climate control system with  
the engine running.  
ꢀyꢀ  
To prevent the battery from being  
discharged, do not leave the fan control  
dial on for a long period of time with the  
ignition switched ON when the engine is  
not running.  
the weather gets hot. Lack of refrigerant  
may make the air conditioner less  
efficient.  
ꢀThe refrigerant specifications are  
indicated on a label attached to the  
inside of the engine compartment. Check  
the label before refilling the refrigerant.  
If the wrong type of refrigerant is used,  
it could result in a serious malfunction  
of the air conditioner.  
ꢀyꢀ  
ꢀyꢀ  
Clear all obstructions such as leaves,  
snow and ice from the hood and the air  
inlet in the cowl grille to improve the  
system efficiency.  
ꢀFor details, consult an Authorized  
Mazda Dealer.  
ꢀyꢀ  
Use the climate control system to defog  
the windows and dehumidify the air.  
ꢀyꢀ  
The recirculate mode should be used  
Label  
when driving through tunnels or while in  
a traffic jam, or when you would like to  
shut off outside air for quick cooling of  
the interior.  
ꢀyꢀ  
Use the outside air mode for ventilation  
or windshield defrosting.  
ꢀyꢀ  
If the vehicle has been parked in direct  
sunlight during hot weather, open the  
windows to let warm air escape, then  
run the climate control system.  
ꢀyꢀ  
Run the air conditioner about 10 minutes  
at least once a month to keep internal  
parts lubricated.  
5
–2  
Interior Features  
Climate Control System  
Vent Operation  
Adjusting the Vents  
Directing airflow  
To adjust the direction of airflow, move the  
adjustment knob.  
NOTE  
ꢀyꢀWhen using the air conditioner under  
humid ambient temperature conditions,  
the system may blow fog from the vents.  
This is not a sign of trouble but a result  
of humid air being suddenly cooled.  
ꢀyꢀThe air vents can be fully opened and  
closed by operating the dial.  
Side Vents  
Knob  
Knob  
Dial  
Dial  
Open  
Close  
Close  
Open  
Center Vents  
Knob  
5
–3  
Interior Features  
Climate Control System  
Selecting the Airflow Mode  
Dashboard Vents  
Defroster and Floor Vents  
Defroster Vents  
Dashboard and Floor Vents  
Floor Vents  
5
–4  
Interior Features  
Climate Control System  
Manual Climate Control  
Temperature control dial  
Rear window defogger switch  
Fan control dial Mode selector dial  
A/C switch  
Air intake selector  
(recirculated air  
mode)  
Air intake selector  
(outside air mode)  
With A/C switch  
NOTE  
Control Switches  
ꢀyꢀThe mode selector dial can be set at the  
intermediate positions ( ) between  
each mode. Set the dial to an  
intermediate position if you want to split  
the airflow between the two modes.  
ꢀyꢀFor example, when the mode selector  
dial is at the position between the  
and positions, airflow from the floor  
vent is less than that of the position.  
Temperature control dial  
This dial controls temperature. Turn it  
clockwise for hot and counterclockwise  
for cold.  
NOTE  
When the mode is set to or with the  
fan control dial in a position other than 0  
and the temperature control dial in the  
maximum cold position, the air intake  
selector switches to the recirculated air  
mode and the A/C turns on automatically.  
If A/C is not desired, press the A/C switch  
to turn it off.  
A/C switch*  
Press the A/C switch to turn the air  
conditioner on. The indicator light on the  
switch will illuminate when the fan control  
dial is in any position except OFF.  
Fan control dial  
Press the switch once again to turn the air  
conditioner off.  
This dial allows variable fan speeds.  
The fan has seven speeds.  
NOTE  
Mode selector dial  
The air conditioner may not function when  
the outside temperature approaches 0 °C  
(32 °F).  
Turn the mode selector dial to select  
airflow mode (page 5-4).  
*Some models.  
5
–5  
Interior Features  
Climate Control System  
NOTE  
Air intake selector  
ꢀyꢀIf the windshield fogs up easily, set the  
mode selector dial to the position.  
ꢀyꢀIf cooler air is desired at face level, set  
the mode selector dial at the position  
and adjust the temperature control dial  
to maintain maximum comfort.  
This switch controls the source of air  
entering the vehicle.  
Press the air intake selector switch to  
alternate between the outside air and  
recirculated air modes.  
ꢀyꢀThe air to the floor is warmer than air  
to the face (except when the temperature  
control dial is set at the extreme hot or  
cold position).  
Recirculated air mode (  
)
Outside air is shut off. Air within the  
vehicle is recirculated.  
ꢀyꢀIn the or  
position, the air  
Outside air mode (  
)
conditioner is automatically turned on  
and the outside air mode is  
automatically selected to defrost the  
Outside air is allowed to enter the  
cabin. Use this mode for ventilation or  
windshield defrosting.  
windshield. In the or  
position, the  
outside air mode cannot be changed to  
the recirculated air mode.  
WARNING  
Do not use the recirculated air mode in  
cold or rainy weather:  
Cooling (With air conditioner)  
Using the recirculated air mode in cold  
or rainy weather is dangerous as it  
will cause the windows to fog up. Your  
vision will be hampered, which could  
lead to a serious accident.  
1. Set the mode selector dial to the  
position.  
2. Set the temperature control dial to the  
cold position.  
3. Set the fan control dial to the desired  
speed.  
4. Turn on the air conditioner by pressing  
the A/C switch.  
5. After cooling begins, adjust the fan  
control dial and temperature control  
dial as needed to maintain maximum  
comfort.  
Heating  
1. Set the mode selector dial to the  
position.  
2. Set the air intake selector to the outside  
air mode.  
3. Set the temperature control dial to the  
hot position.  
4. Set the fan control dial to the desired  
speed.  
5. If dehumidified heating is desired, turn  
on the air conditioner.  
5
–6  
Interior Features  
Climate Control System  
Windshield Defrosting and  
Defogging  
CAUTION  
If the air conditioner is used while  
driving up long hills or in heavy  
traꢀc, monitor the engine coolant  
temperature warning light to see if it is  
illuminated or ꢁashing (page 4-20).  
The air conditioner may cause engine  
overheating. If the warning light is  
illuminated or ꢁashing, turn the air  
conditioning oꢂ (page 7-19).  
1. Set the mode selector dial to the  
position.  
2. Set the temperature control dial to the  
desired position.  
3. Set the fan control dial to the desired  
speed.  
4. If dehumidified heating is desired, turn  
on the air conditioner.  
WARNING  
NOTE  
ꢀyꢀWhen maximum cooling is desired,  
set the temperature control dial to the  
extreme cold position and set the air  
intake selector to the recirculated air  
mode, then turn the fan control dial fully  
clockwise.  
ꢀyꢀIf warmer air is desired at floor level,  
set the mode selector dial at the  
position and adjust the temperature  
control dial to maintain maximum  
comfort.  
Do not defog the windshield using the  
position with the temperature  
control set to the cold position:  
Using the  
position with the  
temperature control set to the cold  
position is dangerous as it will cause  
the outside of the windshield to fog up.  
Your vision will be hampered, which  
could lead to a serious accident. Set  
the temperature control to the hot or  
warm position when using the  
position.  
ꢀyꢀThe air to the floor is warmer than air  
to the face (except when the temperature  
control dial is set at the extreme hot or  
cold position).  
NOTE  
ꢀyꢀFor maximum defrosting, turn on the air  
conditioner, set the temperature control  
dial to the extreme hot position, and  
turn the fan control dial fully clockwise.  
ꢀyꢀIf warm air is desired at the floor, set the  
mode selector dial to the position.  
Ventilation  
1. Set the mode selector dial to the  
position.  
2. Set the air intake selector to the outside  
air mode.  
3. Set the temperature control dial to the  
desired position.  
4. Set the fan control dial to the desired  
speed.  
ꢀyꢀIn the or  
position, the air  
conditioner is automatically turned on  
and the outside air mode is  
automatically selected to defrost the  
windshield. In the or  
position, the  
outside air mode cannot be changed to  
the recirculated air mode.  
5
–7  
Interior Features  
Climate Control System  
Dehumidifying (With air  
conditioner)  
Operate the air conditioner in cool or cold  
weather to help defog the windshield and  
side windows.  
1. Set the mode selector dial to the desired  
position.  
2. Set the air intake selector to the outside  
air mode.  
3. Set the temperature control dial to the  
desired position.  
4. Set the fan control dial to the desired  
speed.  
5. Turn on the air conditioner by pressing  
the A/C switch.  
NOTE  
One of the functions of the air conditioner  
is dehumidifying the air and, to use  
this function, the temperature does not  
have to be set to cold. Therefore, set the  
temperature control dial to the desired  
position (hot or cold) and turn on the air  
conditioner when you want to dehumidify  
the cabin air.  
5
–8  
Interior Features  
Climate Control System  
Automatic Climate Control  
Temperature control dial  
Fan control dial  
Mode selector dial  
A/C switch  
Air intake selector switch  
Rear window defogger switch  
Control Switches  
AUTO position  
The airflow mode automatically adjusts to  
the selected temperature.  
Temperature control dial  
This dial controls temperature. Turn it  
clockwise for hot and counterclockwise  
for cold.  
Except AUTO position  
The desired airflow position can be  
selected by turning the dial.  
Fan control dial  
NOTE  
The fan has seven speeds.  
ꢀyꢀWith the airflow mode set to the  
position and the temperature control  
dial set at a medium temperature,  
heated air is directed to the feet and air  
at a comparably lower temperature will  
flow through the central, left and right  
vents.  
AUTO position  
The amount of airflow will be  
automatically controlled in accordance  
with the set temperature.  
Except AUTO position  
ꢀyꢀWhen the fan control dial is ON, and the  
The airflow amount can be adjusted to the  
desired level by turning the dial.  
mode selector dial is in the  
position, the air conditioner is  
or  
0 position  
automatically turned on and the outside  
air mode is automatically selected to  
To turn off the system, set the dial to 0  
position.  
defrost the windshield. In the  
or  
position, the outside air mode cannot be  
changed to the recirculated air mode.  
Mode selector dial  
Turn the mode selector dial to select  
airflow mode (page 5-4).  
5
–9  
Interior Features  
Climate Control System  
A/C switch  
Operation of Automatic Air  
Conditioning  
Pressing the A/C switch while the AUTO  
switch is turned on will turn off the air  
conditioning (cooling/dehumidifying  
functions).  
The air conditioning can be turned on and  
off by pressing the A/C switch while the  
fan control dial is on.  
1. Set the mode selector dial to the AUTO  
position.  
2. Set the air intake selector to the outside  
air position (indicator light turned off).  
3. Set the temperature control dial to the  
desired position.  
4. Set the fan control dial to the AUTO  
position.  
5. Turn on the air conditioner.  
NOTE  
The air conditioner may not function when  
the outside temperature approaches 0 °C  
(32 °F).  
To turn off the system, set the fan control  
dial to OFF.  
Air intake selector  
NOTE  
Outside or recirculated air positions can be  
selected. Press the switch to select outside/  
recirculated air positions.  
ꢀyꢀSetting the temperature to maximum  
high or low will not provide the desired  
temperature at a faster rate.  
ꢀyꢀWhen selecting heat, the system will  
restrict airflow until it has warmed to  
prevent cold air from blowing out of the  
vents.  
Recirculated air position (indicator light  
illuminated)  
Outside air is shut off. Use this position  
when going through tunnels, driving in  
congested traffic (high engine exhaust  
areas) or when quick cooling is desired.  
Outside air position (indicator light  
turned off)  
Outside air is allowed to enter the  
cabin. Use this mode for ventilation or  
windshield defrosting.  
WARNING  
Do not use the  
rainy weather:  
Using the  
position in cold or  
position in cold or rainy  
weather is dangerous as it will cause  
the windows to fog up. Your vision will  
be hampered, which could lead to a  
serious accident.  
5
–10  
Interior Features  
Climate Control System  
Windshield Defrosting and  
Defogging  
Sunlight/Temperature Sensor  
The climate control system measures  
inside and outside temperatures, and  
sunlight. It then sets temperatures inside  
the passenger compartment accordingly.  
Set the mode selector dial to the  
position and turn the fan control dial to the  
desired speed.  
In this position, the outside air position  
is automatically selected, and when the  
fan control dial is ON, the air conditioner  
automatically turns on. The air conditioner  
will directly dehumidify the air to the front  
windshield and side windows (page 5-4).  
Airflow amount will be increased.  
CAUTION  
Do not obstruct either sensor,  
otherwise the climate control system  
will not operate properly.  
Sunlight sensor  
WARNING  
Set the temperature control to the hot  
or warm position when defogging (  
position):  
Using the  
position with the  
temperature control set to the cold  
position is dangerous as it will cause  
the outside of the windshield to fog up.  
Your vision will be hampered, which  
could lead to a serious accident.  
NOTE  
Use the temperature control dial to  
increase the air flow temperature and  
defog the windshield more quickly.  
Interior temperature sensor  
5
–11  
Interior Features  
Climate Control System  
Dual-Zone Automatic Climate Control  
Climate control information is displayed on the display.  
Temperature setting display (driver)  
Windshield defroster switch  
Driver temperature control dial  
Air intake selector  
(recirculated air  
position)  
Rear window defogger switch  
Air intake selector  
(outside air position)  
Passenger temperature  
control dial  
A/C mode display  
A/C switch  
AUTO switch  
OFF switch  
DUAL switch  
Fan control switch  
Mode selector Mode selector switch  
display  
Airflow display  
Temperature setting display (passenger)  
NOTE  
Control Switches  
AUTO switch indicator light  
AUTO switch  
ꢀyꢀWhen on, it indicates auto operation,  
and the system will function  
automatically.  
ꢀyꢀIf any of the following switches are  
operated while in auto control, the  
AUTO switch indicator turns off.  
By pressing the AUTO switch the  
following functions will be automatically  
controlled in accordance with the selected  
set temperature:  
ꢀyꢀ  
Airflow temperature  
ꢀyꢀ  
Amount of airflow  
ꢀyꢀMode selector switch  
ꢀyꢀFan control switch  
ꢀyꢀWindshield defroster switch  
ꢀ The functions for switches other than  
those operated in the above continue  
to operate in auto control.  
ꢀyꢀ  
Selection of airflow mode  
ꢀyꢀ  
Outside/Recirculated air selection  
ꢀyꢀ  
Air conditioner operation  
OFF switch  
Pressing the OFF switch shuts off the  
climate control system.  
5
–12  
Interior Features  
Climate Control System  
Temperature control dial  
Mode selector switch  
This dial controls temperature. Turn it  
clockwise for hot and counterclockwise  
for cold.  
The desired airflow mode can be selected  
(page 5-4).  
NOTE  
ꢀyꢀ  
When the DUAL switch is off:  
ꢀyꢀWith the airflow mode set to the  
position and the temperature control  
dial set at a medium temperature,  
heated air is directed to the feet and air  
at a comparably lower temperature will  
flow through the central, left and right  
vents.  
ꢀTurn the driver temperature control dial  
to control the temperature throughout  
the entire cabin.  
ꢀyꢀ  
When the DUAL switch is on:  
ꢀTurn the driver or front passenger  
temperature control dial to  
independently control the temperature  
on each side of the cabin.  
ꢀyꢀTo set the air vent to , press the  
windshield defroster switch.  
ꢀyꢀIn the  
or  
position, the air  
NOTE  
conditioner is automatically turned on  
and the outside air mode is  
automatically selected to defrost the  
windshield. In the or  
outside air mode cannot be changed to  
the recirculated air mode.  
ꢀyꢀThe climate control system changes to  
the individual operation mode (DUAL  
switch indicator light illuminated) by  
turning the front passenger temperature  
control dial even when the DUAL switch  
is off, which allows individual control  
of the set temperature for the driver and  
front passenger.  
position, the  
A/C switch  
Pressing the A/C switch while the AUTO  
switch is turned on will turn off the air  
conditioning (cooling/dehumidifying  
functions).  
The air conditioning can be turned on and  
off by pressing the A/C switch while the  
fan control switch is on.  
ꢀyꢀThe temperature units for the  
temperature setting display can be  
changed in conjunction with the  
temperature units for the outside  
temperature display. Refer to Outside  
Temperature Display on page 4-15.  
NOTE  
Fan control switch  
ꢀyꢀThe air conditioning operates when the  
A/C switch is pressed even if the fan is  
off.  
The fan has seven speeds. The selected  
speed will be displayed.  
ꢀyꢀThe air conditioner may not function  
when the outside temperature  
approaches 0 °C (32 °F).  
5
–13  
Interior Features  
Climate Control System  
Air intake selector  
Windshield defroster switch  
Outside or recirculated air positions can be  
selected. Press the switch to select outside/  
recirculated air positions.  
Press the switch to defrost the windshield  
and front door windows.  
Operation of Automatic Air  
Conditioning  
Recirculated air position (  
)
Outside air is shut off. Use this position  
when going through tunnels, driving in  
congested traffic (high engine exhaust  
areas) or when quick cooling is desired.  
1. Press the AUTO switch. Selection  
of the airflow mode, air intake  
selector and amount of airflow will be  
automatically controlled.  
2. Use the temperature control dial to  
select a desired temperature.  
Outside air position (  
)
Outside air is allowed to enter the  
cabin. Use this mode for ventilation or  
windshield defrosting.  
Press the DUAL switch or turn the  
front passenger temperature control  
dial to control the set temperature  
individually for the driver and front  
passenger.  
WARNING  
Do not use the  
rainy weather:  
Using the  
position in cold or  
To turn off the system, press the OFF  
switch.  
position in cold or rainy  
NOTE  
weather is dangerous as it will cause  
the windows to fog up. Your vision will  
be hampered, which could lead to a  
serious accident.  
ꢀyꢀSetting the temperature to maximum  
high or low will not provide the desired  
temperature at a faster rate.  
ꢀyꢀWhen selecting heat, the system will  
restrict airflow until it has warmed to  
prevent cold air from blowing out of the  
vents.  
DUAL switch  
Use the DUAL switch to change the  
mode between the individual operation  
(driver and passenger) and interconnection  
(simultaneous) modes.  
Individual operation mode (indicator  
light illuminated)  
The set temperature can be controlled  
individually for the driver and front  
passenger.  
Interconnection mode (indicator light  
turned off)  
The set temperature for the driver  
and front passenger is controlled  
simultaneously.  
5
–14  
Interior Features  
Climate Control System  
Windshield Defrosting and  
Defogging  
Sunlight/Temperature Sensor  
The climate control system measures  
inside and outside temperatures, and  
sunlight. It then sets temperatures inside  
the passenger compartment accordingly.  
Press the windshield defroster switch.  
In this position, the outside air position  
is automatically selected, and the air  
conditioner automatically turns on. The  
air conditioner will directly dehumidify  
the air to the front windshield and side  
windows (on Page 5-4). Airflow amount  
will be increased.  
CAUTION  
Do not obstruct either sensor,  
otherwise the climate control system  
will not operate properly.  
WARNING  
Set the temperature control to the hot  
or warm position when defogging (  
position):  
Sunlight sensor  
Using the  
position with the  
temperature control set to the cold  
position is dangerous as it will cause  
the outside of the windshield to fog up.  
Your vision will be hampered, which  
could lead to a serious accident.  
NOTE  
Use the temperature control dial to  
increase the air flow temperature and  
defog the windshield more quickly.  
Interior temperature sensor  
5
–15  
Interior Features  
Audio System  
Antenna (5-Door)  
Antenna  
AM/FM Radio Antenna*  
Antenna (4-Door)  
The AM/FM radio antenna receives both  
AM and FM signals.  
AM/FM Radio Antenna  
The AM/FM radio antenna receives both  
AM and FM signals.  
The antenna is embedded into the window  
glass.  
(Type A)  
To remove the antenna, turn it  
counterclockwise.  
To install the antenna, turn it clockwise.  
Make sure the antenna is securely  
installed.  
CAUTION  
When washing the inside of the  
window which has an antenna, use  
a soft cloth dampened in lukewarm  
water, gently wiping the antenna lines.  
Use of glass cleaning products could  
damage the antenna.  
Install  
Remove  
Satellite Radio Antenna*  
The satellite radio antenna receives  
SiriusXM signals.  
Antenna  
CAUTION  
ꢀ¾ꢀ  
To prevent damage to the antenna,  
remove it before entering a car wash  
facility or passing beneath a low  
overhead clearance.  
ꢀ¾ꢀ  
Be careful around the antenna when  
removing snow from the roof. Otherwise  
the antenna could be damaged.  
NOTE  
When leaving your vehicle unattended, we  
recommend that you remove the antenna  
and store it inside the vehicle.  
*Some models.  
5
–16  
Interior Features  
Audio System  
(Type B)  
Operating Tips for Audio  
System  
Antenna  
WARNING  
Always adjust the audio while the  
vehicle is stopped:  
Do not adjust the audio control  
switches while driving the vehicle.  
Adjusting the audio while driving  
the vehicle is dangerous as it could  
distract your attention from the vehicle  
operation which could lead to a  
serious accident.  
Even if the audio control switches are  
equipped on the steering wheel, learn  
to use the switches without looking  
down at them so that you can keep  
your maximum attention on the road  
while driving the vehicle.  
Antenna for AM/FM and Satellite Radio  
Antenna*  
The antenna for AM/FM and satellite radio  
antenna receives both AM and FM signals  
and SiriusXM signals.  
Antenna  
CAUTION  
For the purposes of safe driving,  
adjust the audio volume to a level that  
allows you to hear sounds outside of  
the vehicle including car horns and  
particularly emergency vehicle sirens.  
NOTE  
ꢀyꢀTo prevent the battery from being  
discharged, do not leave the audio  
system on for a long period of time  
when the engine is not running.  
ꢀyꢀIf a cellular phone or CB radio is used  
in or near the vehicle, it could cause  
noise to occur from the audio system,  
however, this does not indicate that the  
system has been damaged.  
*Some models.  
5
–17  
Interior Features  
Audio System  
Do not spill any liquid on the audio  
system.  
FM characteristics  
An FM broadcast range is usually about  
40—50 km (25—30 miles) from the  
source. Because of extra coding needed to  
break the sound into two channels, stereo  
FM has even less range than monaural  
(non-stereo) FM.  
FM Station  
Do not insert any objects, other than CDs,  
into the slot.  
40—50km  
(25—30 miles)  
Signals from an FM transmitter are similar  
to beams of light because they do not  
bend around corners, but they do reflect.  
Unlike AM signals, FM signals cannot  
travel beyond the horizon. Therefore, FM  
stations cannot be received at the great  
distances possible with AM reception.  
Radio Reception  
AM characteristics  
AM signals bend around such things as  
buildings or mountains and bounce off the  
ionosphere.  
Ionosphere  
Therefore, they can reach longer distances  
than FM signals.  
FM wave  
AM wave  
Because of this, two stations may  
sometimes be picked up on the same  
frequency at the same time.  
FM wave  
100—200 km (60—120 miles)  
Atmospheric conditions can also affect  
FM reception. High humidity will cause  
poor reception. However, cloudy days may  
provide better reception than clear days.  
Ionosphere  
Station 1  
Station 2  
5
–18  
Interior Features  
Audio System  
Multipath noise  
Weak signal noise  
Since FM signals can be reflected by  
obstructions, it is possible to receive both  
the direct signal and the reflected signal  
at the same time. This causes a slight  
delay in reception and may be heard as a  
broken sound or a distortion. This problem  
may also be encountered when in close  
proximity to the transmitter.  
In suburban areas, broadcast signals  
become weak because of distance from the  
transmitter. Reception in such fringe areas  
is characterized by sound breakup.  
Reflected wave  
Direct  
Strong signal noise  
This occurs very close to a transmitter  
tower. The broadcast signals are extremely  
strong, so the result is noise and sound  
breakup at the radio receiver.  
Flutter/Skip noise  
Signals from an FM transmitter move in  
straight lines and become weak in valleys  
between tall buildings, mountains, and  
other obstacles. When a vehicle passes  
through such an area, the reception  
conditions may change suddenly, resulting  
in annoying noise.  
Station drift noise  
When a vehicle reaches the area of two  
strong stations broadcasting at similar  
frequencies, the original station may be  
temporarily lost and the second station  
picked up. At this time there will be some  
noise from this disturbance.  
Station 2  
88.3 MHz  
Station 1  
88.1 MHz  
5
–19  
Interior Features  
Audio System  
ꢀyꢀ  
If the memory portion of the CD is  
transparent or translucent, do not use the  
disc.  
Operating Tips for CD Player  
Condensation phenomenon  
Immediately after turning on the heater  
when the vehicle is cold, the CD or  
optical components (prism and lens) in  
the CD player may become clouded with  
condensation. At this time, the CD will  
eject immediately when placed in the unit.  
A clouded CD can be corrected simply by  
wiping it with a soft cloth. Clouded optical  
components will clear naturally in about  
an hour. Wait for normal operation to  
return before attempting to use the unit.  
Transparent  
ꢀyꢀ  
A new CD may have rough edges on its  
inner and outer perimeters. If a disc with  
rough edges is used, proper setting will  
not be possible and the CD player will  
not play the CD. In addition, the disc  
may not eject resulting in a malfunction.  
Remove the rough edges in advance  
by using a ball-point pen or pencil as  
shown below. To remove the rough  
edges, rub the side of the pen or pencil  
against the inner and outer perimeter of  
the CD.  
Handling the CD player  
The following precautions should be  
observed.  
ꢀyꢀ  
The CD revolves at high speed within  
the unit. Defective (cracked or badly  
bent) CDs should never be used.  
ꢀyꢀ  
When driving over uneven surfaces, the  
sound may jump.  
ꢀyꢀ  
Do not use non-conventional discs such  
as heart-shaped, octagonal discs, etc.  
The disc may not eject resulting in a  
malfunction.  
5
–20  
Interior Features  
Audio System  
ꢀyꢀ  
ꢀyꢀ  
The CD player has been designed to  
The CD player ejects the CD if the CD  
is inserted upside down. Also dirty and/  
or defective CDs may be ejected.  
play CDs bearing the identification logo  
as shown below. No other discs can be  
played.  
ꢀyꢀ  
Do not insert cleaning discs in the CD  
player.  
ꢀyꢀ  
Do not insert any disc with a peel-off  
seal affixed to it.  
ꢀyꢀ  
This unit may not be able to play certain  
CD-R/CD-RWs made using a computer  
or music CD recorder due to disc  
characteristics, scratches, smudges, dirt,  
etc., or due to dust or condensation on  
the lens inside the unit.  
ꢀyꢀ  
Use discs that have been legitimately  
produced. If illegally-copied discs such  
as pirated discs are used, the system may  
not operate properly.  
ꢀyꢀ  
Storing CDs in the vehicle exposed to  
direct sunlight or high temperature may  
damage the CD-R/CD-RWs, and make  
them unplayable.  
ꢀyꢀ  
Be sure never to touch the signal surface  
when handling the CDs. Pick up a CD  
by grasping the outer edge or the edge of  
the hole and the outer edge.  
ꢀyꢀ  
CD-R/CD-RW exceeding 700 MB  
cannot be played.  
ꢀyꢀ  
This unit may not be able to play certain  
discs made using a computer due to the  
application (writing software) setting  
used. (For details, consult the store  
where the application was purchased.)  
ꢀyꢀ  
It is possible that certain text data, such  
as titles, recorded on a CD-R/CD-RW  
may not be displayed when musical data  
(CD-DA) is playing.  
ꢀyꢀ  
Do not stick paper or tape on the CD.  
Avoid scratching the reverse side (the  
side without a label). The disc may not  
eject resulting in a malfunction.  
ꢀyꢀ  
The period from when a CD-RW is  
inserted to when it begins playing is  
longer than a normal CD or CD-R.  
ꢀyꢀ  
Completely read the instruction manual  
and cautions for CD-R/CD-RWs.  
ꢀyꢀ  
Dust, finger smudges, and dirt can  
decrease the amount of light reflected  
from the signal surface, thus affecting  
sound quality. If the CD should become  
soiled, gently wipe it with a soft cloth  
from the center of the CD to the edge.  
ꢀyꢀ  
Do not use discs with cellophane tape  
adhering, partially peeled off labels,  
or adhesive material exuding from the  
edges of the CD label. Also, do not use  
discs with a commercially-available  
CD-R label affixed. The disc may not  
eject resulting in a malfunction.  
ꢀyꢀ  
Do not use record sprays, antistatic  
agents, or household spray cleaners.  
Volatile chemicals such as benzine and  
thinner can also damage the surface of  
the CD and must not be used. Anything  
that can damage, warp, or fog plastic  
should never be used to clean CDs.  
5
–21  
Interior Features  
Audio System  
Specialized glossary  
MP3  
Operating Tips for MP3  
NOTE  
Supply of this product only conveys a  
license for private, non-commercial  
use and does not convey a license nor  
imply any right to use this product in any  
commercial (i.e. revenue-generating)  
real time broadcasting (terrestrial,  
satellite, cable and/or any other media),  
broadcasting/streaming via the Internet,  
intranets and/or other networks or in other  
electronic content distribution systems,  
such as pay-audio or audio-on-demand  
applications. An independent license for  
such use is required. For details, please  
visit http://www.mp3licensing.com.  
Abbreviation for “MPEG Audio Layer  
3”. A technical standard for audio  
compression as decided by the ISO*1  
MPEG working group. Use of MP3  
allows for audio data to be compressed to  
approximately a tenth of the source data  
size.  
*1 International Organization for  
Standardization  
Operating Tips for WMA  
WMA is short for Windows Media Audio  
and is the audio compression format used  
by Microsoft.  
Audio data can be created and stored at a  
higher compression ratio than MP3.  
ꢀyꢀ  
This audio system handles MP3 files  
that have been recorded on CD-R/CD-  
RW/CD-ROMs.  
ꢀyꢀ  
When naming an MP3 file, be sure to  
ꢀ*ꢀ  
Microsoft and Windows Media are  
registered trademarks of Microsoft  
Corporation U.S. in the United States  
and other countries.  
add an MP3 file extension (.mp3) after  
the file name.  
ꢀyꢀ  
The number of characters which can be  
displayed is restricted.  
CAUTION  
CAUTION  
This unit plays ꢃles with the (.wma) ꢃle  
extension as a WMA ꢃle. Do not use the  
WMA ꢃle extension for ꢃles other than  
WMA ꢃles. Otherwise, it could result in  
noise or a malfunction.  
This unit can only play MP3 ꢃles that  
have an MP3 ꢃle extension (.mp3)  
attached. Do not attach an MP3 ꢃle  
extension to any other type ꢃle as it  
could cause noise to be emitted or a  
malfunction in the unit.  
ꢀyꢀ  
WMA files written under specifications  
other than the indicated specification  
may not play normally or files or folder  
names may not display correctly.  
ꢀyꢀ  
The file extension may not be provided  
depending on the computer operating  
system, version, software, or settings. In  
this case, add the file extension “.wma”  
to the end of the file name, and then  
write it to the disc.  
5
–22  
Interior Features  
Audio System  
Operating Tips for AAC  
Operating Tips for OGG  
AAC stands for Advanced Audio Coding,  
which is standardized voice compression  
established by the ISO*1 working group  
(MPEG). Audio data can be created and  
stored at a higher compression ratio than  
MP3.  
OGG is the audio compression format for  
Xiph. Org Foundation.  
Audio data can be created and stored at a  
higher compression ratio than MP3.  
CAUTION  
This unit plays files with the extensions  
(.aac/.m4a/.wav*2) as the AAC files.  
This unit plays ꢃles with the (.ogg) ꢃle  
extension as a OGG ꢃle. Do not use the  
OGG ꢃle extension for ꢃles other than  
OGG ꢃles. Otherwise, it could result in  
noise or a malfunction.  
*1 International Organization for  
Standardization  
*2 Type B  
CAUTION  
ꢀyꢀ  
OGG files written under specifications  
other than the indicated specification  
may not play normally or files or folder  
names may not display correctly.  
Do not use an audio ꢃle extension on  
ꢃles other than audio ꢃles. In addition,  
do not change the audio ꢃle extension.  
Otherwise, the unit will not recognize  
the ꢃle correctly resulting in noise or a  
malfunction.  
ꢀyꢀ  
The file extension may not be provided  
depending on the computer operating  
system, version, software, or settings. In  
this case, add the file extension “.ogg” to  
the end of the file name, and then write  
it to the disc.  
ꢀyꢀ  
AAC files written under specifications  
other than the indicated specification  
may not play normally or files or folder  
names may not display correctly.  
ꢀyꢀ  
The file extension may not be provided  
depending on the computer operating  
system, version, software, or settings. In  
this case, add the file extension “.aac ”,  
“.m4a”, or “.wav*2” to the end of the file  
name, and then write it to the memory.  
ꢀ*2 Type B  
5
–23  
Interior Features  
Audio System  
NOTE  
Operating Tips for USB device  
ꢀyꢀPlayback may not be possible  
depending on the type and condition of  
the USB flash memory even if the audio  
file complies with the standard above.  
ꢀyꢀA copyright protected WMA/AAC file  
cannot be played in this unit.  
ꢀyꢀThe order of the music data stored in  
the device may differ from the playback  
order.  
ꢀyꢀTo prevent loss or damage of stored  
data, we recommend that you always  
back up your data.  
ꢀyꢀIf a device exceeds the maximum  
electric current value of 1,000 mA,  
it may not operate or recharge when  
connected.  
This unit plays audio files as follows:  
Extension  
.mp3  
Playback with this unit  
MP3  
.wma  
.aac  
WMA  
.m4a  
AAC  
OGG  
.wav*1  
.ogg*1  
*1 Type B  
CAUTION  
Do not use an audio ꢃle extension on  
ꢃles other than audio ꢃles. In addition,  
do not change the audio ꢃle extension.  
Otherwise, the unit will not recognize  
the ꢃle correctly resulting in noise or a  
malfunction.  
ꢀyꢀDo not pull out the USB device while in  
the USB mode (only pull it out while in  
FM/AM radio or CD mode).  
ꢀyꢀThe device will not operate if the data is  
password protected.  
*1  
MP3/WMA/AAC/OGG files written  
ꢀyꢀ  
under specifications other than the  
indicated specification may not play  
normally or files/folder names may not  
display correctly.  
*1 Type B  
5
–24  
Interior Features  
Audio System  
Operating Tips for iPod  
This unit supports playback of music files  
recorded to an iPod.  
ꢀyꢀ  
iPod is a trademark of Apple Inc.,  
registered in the U.S. and other  
countries.  
The iPod may not be compatible  
depending on the model or OS version. In  
this case, an error message is displayed.  
CAUTION  
ꢀ¾ꢀ  
Remove the iPod when it is not in  
use. Because the iPod is not designed  
to withstand excessive changes in  
temperature inside the cabin, it could be  
damaged or the battery may deteriorate  
due to the excessive temperature or  
humidity inside the cabin if it is left in the  
vehicle.  
ꢀ¾ꢀ  
If data in the iPod is lost while it is  
connected to the unit, Mazda cannot  
guarantee recovery of any lost data.  
ꢀ¾ꢀ  
If the iPod battery is deteriorated, the  
iPod may not recharge and playback  
may not be possible when it is connected  
to the unit. Replace the iPod battery  
immediately.  
ꢀ¾ꢀ  
Be careful not to pinch the iPod  
connecting cable when opening/closing  
the center console.  
ꢀ¾ꢀ  
For details on using the iPod, refer to the  
iPod instruction manual.  
ꢀ¾ꢀ  
When connecting the iPod to a USB port,  
all commands are made from the audio  
unit. iPod control is not possible.  
NOTE  
The audio unit cannot display images or  
videos stored in an iPod.  
5
–25  
Interior Features  
Audio System  
Audio Set (Type A)  
Power/Volume/Sound Controls.............................................................................page 5-28  
Clock.....................................................................................................................page 5-30  
Operating the Radio ..............................................................................................page 5-32  
Operating the Compact Disc (CD) Player.............................................................page 5-34  
How to use Auxiliary jack/USB port ....................................................................page 5-37  
Error Indications ...................................................................................................page 5-37  
5
–26  
MEMO  
5
–27  
Interior Features  
Audio System  
Power/Volume/Sound Controls  
Audio display  
Menu button  
Power/Volume/Audio control dial  
Power ON/OFF  
2. Turn the audio control dial to adjust the  
selected functions as follows:  
Switch the ignition to ACC or ON. Press  
the power/volume dial to turn the audio  
system on. Press the power/volume dial  
again to turn the audio system off.  
Setting value  
Turn  
Counterclockwise Clockwise  
Indication  
Turn  
Volume adjustment  
ALC  
(Automatic volume  
adjustment)  
Level  
decrease  
Level  
increase  
To adjust the volume, turn the power/  
volume dial. Turn the power/volume  
dial clockwise to increase volume,  
counterclockwise to decrease it.  
BASS  
(Low pitch sound)  
Decrease  
bass  
Increase  
bass  
TREB  
(Treble sound)  
Decrease  
treble  
Increase  
treble  
Audio sound adjustment  
FADE  
(Front/back volume  
balance)  
Shift the Shift the  
sound to the sound to  
1. Press the menu button (  
) to select  
the function. The selected function will  
be indicated.  
front  
the rear  
BAL  
(Left/right volume  
balance)  
Shift the Shift the  
sound to the sound to  
left  
the right  
BEEP  
(Audio operation  
sound)  
Off  
On  
BT SETUP*  
Select mode  
12Hr 24Hr  
(Flashing) (Flashing)  
12Hr  
24Hr  
ꢀ*ꢀ  
Depending on the model, this function  
may not be available.  
5
–28  
Interior Features  
Audio System  
NOTE  
If not operated for several seconds, the  
display returns to the previous display. To  
reset bass, treble, fade, and balance, press  
the menu button (  
) for 2 seconds.  
The unit will beep and “CLEAR” will be  
displayed.  
Automatic Level Control (ALC)  
The automatic level control (ALC)  
changes the audio volume automatically  
according to the vehicle speed. The faster  
the vehicle speed, the higher the volume  
increases. ALC has ALC OFF and ALC  
LEVEL 1 to 7 modes. At ALC LEVEL 7,  
the amount that the volume can increase  
is at the maximum. Select the mode  
according to the driving conditions.  
BT SETUP mode*  
Music and other audio such as voice data  
recorded on portable audio devices and  
mobile phones available on the market  
which are equipped with the Bluetooth®  
transmission function can be listened to  
via wireless transmission over the vehicle's  
speakers. Using the BT SETUP mode,  
these devices can be programmed to the  
Bluetooth® unit or changed (page 5-80).  
Time adjustment  
Rotating the audio control dial switches  
the display between 12 and 24-hour clock  
time (page 5-30).  
*Some models.  
5
–29  
Interior Features  
Audio System  
Clock  
:00 button  
Audio control dial  
Audio display  
Clock button  
Hour/Minute set switch  
Menu button  
NOTE  
Setting the time  
ꢀyꢀWhen the :00 button (1) is pressed, the  
seconds will start at “00”.  
ꢀyꢀSwitching between 12 and 24-hour  
clock time:  
The clock can be set at any time when the  
ignition is switched to ACC or ON.  
1. To adjust the time, press the clock  
button (  
a beep is heard.  
2. The clock's current time will flash.  
Time adjustment  
) for about 2 seconds until  
ꢀ Press the menu button (  
) several  
times until 12 and 24-hour clock time  
are displayed. Turn the audio control  
dial in either direction, select the  
desired clock setting while the preferred  
clock time is flashing.  
ꢀ
ꢀ
y To adjust the time, press the hour/  
minute set button ( ) while the  
clock's current time is flashing.  
,
ꢀ
ꢀ
y The hours advance while the hour set  
button ( ) is pressed. The minutes  
advance while the minute set button  
(
) is pressed.  
3. Press the clock button (  
start the clock.  
) again to  
Time resetting  
1. Press the clock button (  
) for about  
2 seconds until a beep is heard.  
2. Press the :00 button (1).  
3. When the button is pressed, the time  
will be reset as follows:  
(Example)  
12:01—12:29ĺ12:00  
12:30—12:59ĺ1:00  
5
–30  
MEMO  
5
–31  
Interior Features  
Audio System  
Operating the Radio  
Audio display  
Channel preset buttons  
Tuning button Scan button  
Band selector button  
Auto memory button  
Radio ON  
Seek tuning  
Press a band selector button (  
turn the radio on.  
) to  
Automatic search for radio stations starts  
when the tuning button ( ) is pressed  
,
until a beep sound is heard. The search  
stops when a station is found.  
Band selection  
Successively pressing the band selector  
button ( ) switches the bands as  
NOTE  
If you continue to press and hold the  
button, the frequency will continue  
changing without stopping.  
follows: FM1ĺFM2ĺAM.  
The selected mode will be indicated.  
NOTE  
Scan tuning  
If the FM broadcast signal becomes weak,  
reception automatically changes from  
STEREO to MONO for reduced noise.  
Press and hold the scan button (  
) to  
automatically sample strong stations.  
Scanning stops at each station for about 5  
seconds. To hold a station, press and hold  
the scan button (  
interval.  
Tuning  
) again during this  
The radio has the following tuning  
methods: Manual, Seek, Scan, Preset  
channel, and Auto memory tuning. The  
easiest way to tune stations is to set them  
on preset channels.  
Preset channel tuning  
The 6 preset channels can be used to store  
6 AM and 12 FM stations.  
Manual tuning  
1. To set a channel first select AM, FM1,  
or FM2. Tune to the desired station.  
2. Press a channel preset button for  
about 2 seconds until a beep is heard.  
The preset channel number or station  
frequency will be displayed. The  
Select the station by pressing the tuning  
button (  
,
) lightly.  
station is now held in the memory.  
5
–32  
Interior Features  
Audio System  
3. Repeat this operation for the other  
stations and bands you want to store.  
To tune one in the memory, select AM,  
FM1, or FM2 and then press its channel  
preset button. The station frequency or  
the channel number will be displayed.  
Auto memory tuning  
This is especially useful when driving in  
an area where the local stations are not  
known.  
Press and hold the auto memory button  
(
) for about 2 seconds until a beep  
is heard; the system will automatically  
scan and temporarily store up to 6 stations  
with the strongest frequencies in each  
selected band in that area.  
After scanning is completed, the station  
with the strongest frequency will be tuned  
and its frequency displayed. Press and  
release the auto memory button (  
to recall stations from the auto-stored  
stations. One stored station will be  
)
selected each time and its frequency and  
channel number will be displayed.  
NOTE  
If no stations can be tuned after scanning  
operations, “A” will be displayed.  
5
–33  
Interior Features  
Audio System  
Operating the Compact Disc (CD) Player*  
Repeat button  
Text button  
Play/Pause button  
Random button Audio display  
Track down/  
Reverse button  
Folder up button  
Folder down button  
Track up/  
Fast-forward button  
Media/Scan button  
CD eject button CD slot  
Ejecting the CD  
Type  
Playable data  
y
Music/MP3/WMA/ Music data (CD-DA)  
Press the CD eject button ( ) to eject the  
CD.  
y
AAC CD player  
MP3/WMA/AAC file  
Playback  
NOTE  
Press the media button (  
to CD mode and start playback.  
) to switch  
If a disc has both music data (CD-DA)  
and MP3/WMA/AAC files, playback of the  
two or three file types differs depending on  
how the disc was recorded.  
NOTE  
The CD mode cannot be selected if a CD  
has not been inserted.  
Inserting the CD  
Pause  
Insert the CD into the slot, label-side up.  
The auto-loading mechanism will set the  
CD and begin play.  
To stop playback, press the Play/Pause  
button (4).  
Press the button again to resume playback.  
NOTE  
Fast-forward/Reverse  
There will be a short lapse before play  
begins while the player reads the digital  
signals on the CD.  
Press and hold the fast-forward button (  
to advance through a track at high speed.  
Press and hold the reverse button ( ) to  
reverse through a track at high speed.  
)
*Some models.  
5
–34  
Interior Features  
Audio System  
Track search  
Repeat playback  
Press the track up button ( ) once to skip  
forward to the beginning of the next track.  
Press the track down button ( ) within a  
few seconds after playback begins to track  
down to the beginning of the previous  
track.  
During music CD playback  
1. Press the repeat button (1) during  
playback to play the current track  
repeatedly. “TRACK RPT” is  
displayed.  
Press the track down button ( ) after a  
few seconds have elapsed to start playback  
from the beginning of the current track.  
2. Press the button again to cancel the  
repeat playback.  
During MP3/WMA/AAC CD playback  
(Track repeat)  
Folder search (during MP3/WMA/AAC  
CD playback)  
To change to the previous folder, press the  
folder down button ( ), or press the folder  
up button ( ) to advance to the next  
folder.  
1. Press the repeat button (1) during  
playback to play the current track  
repeatedly. “TRACK RPT” is  
displayed.  
2. To cancel the repeat playback, press the  
button again after 3 seconds.  
Music scan  
During music CD playback  
This function scans the titles on a CD and  
plays 10 seconds of each song to aid you  
in finding a song you want to listen to.  
(Folder repeat)  
1. Press the repeat button (1) during  
playback, and then press the button  
again within 3 seconds to play the  
tracks in the current folder repeatedly.  
“FOLDER RPT” is displayed.  
2. Press the button again to cancel the  
repeat playback.  
Press and hold the scan button (  
during playback to start the scan play  
)
operation (the track number will flash).  
Press and hold the scan button (  
again to cancel scan playback.  
)
During MP3/WMA/AAC CD playback  
Random playback  
This function scans the titles in a folder  
currently being played and plays 10  
seconds of each song to aid you in finding  
a song you want to listen to. Press and  
Tracks are randomly selected and played.  
During music CD playback  
1. Press the random button (2) during  
playback to play the tracks on the CD  
randomly. “DISC RDM” is displayed.  
2. Press the button again to cancel the  
random playback.  
hold the scan button (  
playback to start the scan play operation  
(the track number will flash).  
Press and hold the scan button (  
again to cancel scan playback.  
) during  
)
NOTE  
If the unit is left in scan, normal playback  
will resume where scan was selected.  
5
–35  
Interior Features  
Audio System  
During MP3/WMA/AAC CD playback  
(Folder random)  
MP3/WMA/AAC CD  
File number/Elapsed time  
1. Press the random button (2) during  
playback to play the tracks in the  
folder randomly. “FOLDER RDM” is  
displayed.  
2. To cancel the random playback, press  
the button again after 3 seconds.  
Folder number/File number  
File name  
(CD random)  
Folder name  
Album name  
Song name  
Artist name  
1. Press the random button (2) during  
playback, and then press the button  
again within 3 seconds to play the  
tracks on the CD randomly. “DISC  
RDM” is displayed.  
2. Press the button again to cancel the  
random playback.  
Switching the display  
For files with a file name and other  
information that have been input, the  
display switches between display of the  
file name and other information each  
time the text button (3) is pressed during  
playback.  
NOTE  
ꢀyꢀThe information viewable in the display  
is only CD information (such as artist  
name, song title) which has been  
recorded to the CD.  
ꢀyꢀThis unit cannot display some  
characters. Characters which cannot be  
displayed are indicated by an asterisk  
( ).  
Music CD  
Track number/Elapsed time  
Track number  
Display scroll  
Track name*  
Only 13 characters can be displayed at one  
time. To display the rest of the characters  
of a long title, press and hold the text  
button (3). The display scrolls the next 13  
characters. Press and hold the text button  
(3) again after the last 13 characters have  
been displayed to return to the beginning  
of the title.  
Album name*  
Artist name*  
* Depending on the CD, this information  
may not available.  
5
–36  
Interior Features  
Audio System  
NOTE  
Error Indications  
The number of characters which can be  
displayed is restricted.  
If you see an error indication on the audio  
display, find the cause in the chart. If you  
cannot clear the error indication, take the  
vehicle to an Authorized Mazda Dealer.  
Message display  
If “CHECK CD” is displayed, it means  
that there is some CD malfunction. Check  
the CD for damage, dirt, or smudges, and  
then properly reinsert it. If the message  
appears again, insert another known good  
CD. If the message continues to appear,  
take the unit to an Authorized Mazda  
Dealer for service.  
Indication  
Cause  
CD is  
inserted  
upside  
down  
Solution  
Insert the CD properly.  
If the error indication  
continues to display,  
consult an Authorized  
Mazda Dealer.  
CHECK  
CD  
Insert another CD  
properly. If the error  
indication continues  
to display, consult an  
Authorized Mazda  
Dealer.  
CD is  
defective  
How to use Auxiliary jack/USB  
port  
Audio can be heard from the vehicle's  
speakers by connecting a commercially-  
available portable audio unit to the  
auxiliary jack.  
Use a commercially-available, non-  
impedance (3.5 ) stereo mini plug cable.  
Contact an Authorized Mazda Dealer for  
details.  
In addition, audio can be played from the  
vehicle audio device by connecting a USB  
device or an iPod to the USB port.  
Refer to AUX/USB/iPod mode on page  
5-59.  
5
–37  
Interior Features  
Audio System  
Audio Set (Type B)  
NOTE  
The explanation of functions described in this manual may differ from the actual  
operation, and the shapes of screens and buttons and the letters and characters displayed  
may also differ from the actual appearance.  
Additionally, depending on future software updates, the content may successively change  
without notice.  
Audio Set (Type B) has three different human interfaces.  
ꢀyꢀ  
Commander switch  
ꢀyꢀ  
Touch panel  
ꢀyꢀ  
Voice recognition with steering switch and microphone  
Commander switch operation  
Volume dial  
NOTE  
For safety reasons, some operations are disabled while the vehicle is being driven.  
Volume dial operation  
Press the volume dial to switch the audio MUTE on and off.  
Turn the volume dial to adjust the volume. The volume increases by turning the dial  
clockwise, and decreases by turning it counterclockwise.  
Switches around commander knob  
: Displays the home screen.  
: Displays the Entertainment screen.  
: Displays the Navigation screen. (Only navigation-equipped vehicles)  
: Displays the Favorites screen. Long-press to store particular items in Favorites. (AM/  
FM radio, phonebook and destination of the navigation system can be programmed.)  
: Returns to previous screen.  
5
–38  
Interior Features  
Audio System  
Commander knob operation  
(Selection of icons on screen)  
1. Tilt or turn the commander knob and move the cursor to the desired icon.  
2. Press the commander knob and select the icon.  
NOTE  
Long-press operation of the commander knob is also possible for some functions.  
Touch panel operation  
CAUTION  
Do not press the screen strongly or press it with a sharp-pointed object. Otherwise, the  
screen could be damaged.  
NOTE  
For safety reasons, touch panel operation is disabled while the vehicle is moving.  
5
–39  
Interior Features  
Audio System  
Basic Operation Method  
TOUCH & TAP  
1. Touch the item indicated in the center display.  
2. The operation is launched and the next item is displayed.  
SLIDE  
1. Touch the setting item displaying a slider bar.  
2. Slide your finger in the desired direction.  
SWIPE  
1. Touch the item displaying a slider bar.  
2. Swipe your finger in the desired direction.  
5
–40  
Interior Features  
Audio System  
Return to previous screen  
1. Touch the  
.
Displaying the home screen  
1. Touch the  
.
Home screen  
Icon  
Function  
Applications  
Information such as average fuel economy, maintenance, and warnings can be verified.  
Depending on the grade and specification, the screen display may differ.  
Entertainment  
Operates audio such as the radio and CDs. The audio source most recently used is  
displayed. An audio source which cannot be used at that time is skipped and the previous  
audio source is displayed.  
To change the audio source, select the  
icon again.  
Communication  
Bluetooth® related functions are available.  
Navigation  
Navigation screen is displayed (vehicles with navigation system).  
If the SD card for the navigation system is not inserted, the compass indicating the direction  
in which the vehicle is moving is displayed.  
The compass may not indicate the correct bearing when the vehicle is stopped or traveling  
at a slow speed.  
Settings  
Overall setting menu (Such as display, sound, Bluetooth® and Language).  
Depending on the grade and specification, the screen display may differ.  
5
–41  
Interior Features  
Audio System  
Volume/Display/Sound Controls  
Commander switch  
Audio control switch  
Volume dial  
Volume switch  
Volume adjustment  
Daytime/nighttime screen setting  
Turn the commander switch volume dial.  
The volume switch on the steering switch  
can also be pressed.  
The daytime or nighttime screen can be  
selected.  
: Switches screen automatically  
according to headlight illumination  
condition*1  
Display setting  
Select the icon on the home screen and  
display the Settings screen.  
: Daytime screen setting  
: Nighttime screen setting  
Select the  
would like to change.  
tab to select the item you  
*1 The display is constantly on daytime  
screen when the illumination dimmer is  
cancelled.  
Display OFF/Clock  
The center display can be turned off.  
Select  
When  
selected the center display turns off and  
the clock is displayed.  
Brightness adjustment  
to turn the display off.  
is  
Adjust the center display brightness using  
the slider.  
The center display can be turned back on  
as follows:  
Contrast adjustment  
Adjust the center display contrast using  
the slider.  
ꢀyꢀ  
Touch the center display.  
ꢀyꢀ  
Operate the commander switch.  
Display setting reset  
All of the screen setting values can be  
reset to their initial settings.  
1. Select  
2. Select  
.
.
5
–42  
Interior Features  
Audio System  
Audio sound adjustment  
Centerpoint®*3  
Centerpoint® lets vehicle owners enjoy a  
Bose® surround sound experience from  
their existing CDs, MP3s and satellite  
radio.  
Select the icon on the home screen and  
display the Settings screen.  
Select the tab to select the item you  
would like to change.  
Specifically engineered to meet the unique  
demands of reproducing surround sound in  
a vehicle.  
Converts stereo signals to multiple  
channels allowing greater precision when  
reproducing the sound.  
Indication  
Setting value  
Side: Low pitch  
enhancement  
Side: Low pitch  
reduction  
Bass  
(Low pitch sound)  
An enhanced algorithm to simultaneously  
create a wider, more spacious sound field.  
*3 Centerpoint® is a registered trademark  
of Bose Corporation.  
Side: Treble  
enhancement  
Side: Treble reduction  
Treble  
(Treble sound)  
Rear: Front speaker  
volume reduction  
Front: Rear speaker  
volume reduction  
Fade  
(Front/Rear volume  
balance)  
AudioPilot®*4  
When driving, background noise can  
interfere with enjoying music.  
AudioPilot® noise compensation  
technology continuously adjusts the music  
to compensate for background noise and  
vehicle speed.  
Right: Left side volume  
reduction  
Left: Right side volume  
reduction  
Balance  
(Left/right volume  
balance)  
ALC*1  
(Automatic volume  
adjustment)  
Off—Adjustment at  
seven levels  
It reacts only to sustained noise sources  
and not intermittent ones, such as speed  
bumps.  
Centerpoint®*2  
(Automatic surround  
level adjustment)  
On/Off  
AudioPilot®*2  
(Automatic volume  
adjustment)  
An enhanced DSP algorithm allows faster  
and more effective compensation for  
unusual situations, such as driving on a  
very rough road or at high speeds.  
*4 AudioPilot® is a registered trademark of  
Bose Corporation.  
On/Off  
On/Off  
Beep  
(Audio operation sound)  
*1 Standard audio  
*2 Bose® Sound System  
Automatic Level Control (ALC)  
The automatic level control is a feature  
that automatically adjusts audio volume  
and sound quality according to the vehicle  
speed. The volume increases in accordance  
with the increase in vehicle speed, and  
decreases as vehicle speed decreases.  
5
–43  
Interior Features  
Audio System  
Operating the Radio  
Radio ON  
Select the icon on the home screen and display the Entertainment screen. When selecting  
the desired radio, the following icons are indicated in the lower part of the center display.  
AM/FM Radio  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Displays the station list.  
Select  
memory preset list.  
Select the desired frequency.  
to display the frequencies of up to ten radio stations on the auto  
Displays the Favorites list. Long-press to store radio station currently being aired.  
Switches the  
on and off. Displays the multi-cast channel list of the  
.
You can search for receivable radio stations.  
Scanning stops at each station for about five seconds.  
Select again to continue receiving the radio station.  
Manual radio station selection.  
Select the tuner and rotate the commander knob or drag the display, or touch the radio  
frequency.  
Press or to change the radio frequency one step at a time.  
When or is long-pressed, the radio frequency changes continually. It stops when you  
remove your hand from the icon or the commander knob.  
Launches the iTunes Tagging function (for Apple devices with USB use only). Can be used  
when the  
is on.  
Automatic radio station selection.  
When long-pressed, the radio frequency changes continually. It stops when you remove  
your hand from the icon or the commander knob.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-42.  
5
–44  
Interior Features  
Audio System  
Favorites Radio  
4. Select a radio station or radio  
frequency. The selected radio station  
can be moved.  
5. Move the radio station then select  
Selected stations can be registered for  
convenient operation. Up to 50 stations  
can be registered. The Favorites list is  
common to AM, FM, and satellite radio.  
.
Radio Broadcast Data System (RBDS)*  
Registering to Favorites  
Radio text information display  
Long-press the icon to register the  
current radio station. The registration can  
also be performed using the following  
procedure.  
Radio text information sent from a  
broadcasting station is displayed in the  
center display.  
1. Select the icon to display the  
Favorites list.  
NOTE  
Radio text information is a function of FM  
radio. Text information is not displayed in  
the following:  
2. Select  
3. Select  
.
.
4. The station is added to the bottom of  
the Favorites list.  
ꢀyꢀDuring  
ꢀyꢀNot an RBDS broadcast  
reception  
NOTE  
ꢀyꢀRBDS broadcast, but radio text is not  
transmitted from the radio station  
If the battery is disconnected, your  
Favorites list will be not deleted.  
Genre Seek  
Selecting radio station from Favorites  
Some FM stations transmit Genre codes  
(Program type like a Rock, News, and so  
on). This code enables alternative stations  
transmitting the same Genre code to be  
found quickly.  
1. Select the icon to display the  
Favorites list.  
2. Select the radio station name or radio  
frequency to tune in the radio station.  
(To scan for Genre Seek:)  
Deleting from Favorites  
1. Select the  
mode.  
2. Select  
3. Select the genre type you want to  
select.  
icon while in the FM  
1. Select the icon to display the  
Favorites list.  
to open the genre list.  
2. Select  
3. Select  
.
.
4. Select the radio station or radio  
frequency you want to delete.  
4. Select the  
,
icon.  
5. Select  
.
NOTE  
To change the desired genre, select the  
icon.  
Changing Favorites list order  
1. Select the icon to display the  
Favorites list.  
2. Select  
3. Select  
.
.
*Some models.  
5
–45  
Interior Features  
Audio System  
Ex.)  
HD Radio  
89.3 is currently being received. With  
Rock selected as the Genre, the radio  
stations broadcasting Rock are at the  
following frequencies.  
What is HD Radio™ Technology and  
how does it work?  
HD Radio™ Technology is the digital  
evolution of analog AM/FM radio. Your  
radio product has a special receiver which  
allows it to receive digital broadcasts  
(where available) in addition to the analog  
broadcasts it already receives. Digital  
broadcasts have better sound quality than  
analog broadcasts as digital broadcasts  
provide free, crystal clear audio. For more  
information, and a guide to available radio  
stations and programming, please visit  
www.hdradio.com.  
98.3*1, 98.7, 104.3*1, 107.1  
*1 Radio stations with good reception  
The frequency changes as follows each  
time  
is pressed.  
89.3ĺ98.3ĺ104.3ĺ98.3  
NOTE  
ꢀyꢀOnly one Genre can be selected.  
ꢀyꢀIt may not be possible to receive any  
station even if the Genre Seek function  
is used.  
ꢀyꢀIf a program in the selected genre is not  
broadcast to a region, reception is not  
possible even if the Genre Seek function  
is used.  
ꢀyꢀThe Genre Seek function searches for  
genre code (program type) which FM  
analog broadcasts transmit.  
specialty programs (HD2-HD8) cannot  
be searched because they are not FM  
analog broadcasts.  
Benefits of HD Radio™ Technology  
(Information)  
The song title, artist name, album name  
and genre will appear on the screen when  
available by the radio station.  
(Multicast)  
On the FM radio frequency most digital  
stations have “multiple” or supplemental  
programs on each FM station.  
ꢀyꢀIf radio stations which are selected by  
scanning using the Genre Seek function  
are broadcasting stations,  
they are changed from analog  
Listening to HD Radio™ Technology  
If icon turns on by selecting a radio  
station which is an  
station, the analog broadcast is switched to  
an broadcast automatically after  
a few seconds and then received.  
broadcasting  
broadcasts to  
broadcasts  
after a few seconds if the reception  
conditions are good. The genre is  
displayed after the switch, however, the  
genre for FM analog broadcasts may  
differ.  
If the broadcast is stopped and  
changed to an analog broadcast, press  
down to turn off  
.
Multicast channel selection (FM)  
If multi-cast channels are available for an  
broadcast currently being  
received, the multi-cast channel list is  
displayed. Select the desired radio station.  
5
–
46  
Interior Features  
Audio System  
NOTE  
3. Synchronize the device with iTunes.  
The tagged song can now be purchased  
from the iTunes Store.  
ꢀyꢀIf an analog broadcast is received once  
and  
selected, the audio unit switches to the  
is received while HD1 is  
NOTE  
station automatically.  
ꢀyꢀWhen the icon is illuminated, there  
could be a noticeable difference in  
sound quality and volume when a  
change from digital to analog signals  
occurs. If the sound quality and volume  
become noticeably diminished or cut  
off, select the icon to turn off  
ꢀyꢀBoth AM and FM  
used.  
ꢀyꢀBecause iTunes Tagging only supports  
purchasing from the iTunes Store, direct  
downloading from the equipped vehicle  
audio is not possible.  
ꢀyꢀIf the available memory for the  
connected device is insufficient, the tag  
is not sent.  
ꢀyꢀIf an error occurs while the tag is being  
sent, reconnect the device.  
can be  
(
icon is not illuminated).  
ꢀyꢀOnce an analog broadcast is received  
when HD1 is selected from the Favorite  
channels, it is switched to  
automatically. If the radio reception  
conditions are poor, or HD is off,  
Operating the Satellite Radio*  
What is satellite radio?  
switching to  
not possible.  
broadcasts is  
ꢀyꢀWhen an HD specialty channel (HD2 to  
HD8) is selected from the Favorite  
channels, “Signal Lost” is displayed  
and no audio is output until  
is received. If the radio reception  
conditions are poor, “Signal Lost”  
continues to be displayed.  
ꢀyꢀIf the icon is not illuminated,  
information such as song titles of the  
station are received,  
With over 130 channels, SiriusXM  
Satellite Radio brings you more of what  
you love. Get channels and channels of  
commercial-free music, plus sports, news,  
talk, entertainment and more.  
Commercial-free music from nearly  
every genre —rock to pop, hip-hop to  
country, jazz, classical and more. Plus  
live performances and artist-dedicated  
channels.  
however, the audio output is analog.  
Live sports Play-by-Play & Expert Talk  
—every NFL game, every NASCAR®  
race, 24/7 sports talk, college sports and  
more.  
iTunes Tagging (for Apple devices with  
USB use only)  
By tagging a song currently being aired,  
the song can be easily purchased from the  
iTunes Store. Up to 100 tags can be stored.  
Exclusive entertainment, comedy and  
talk —The biggest names, compelling  
talk, hilarious comedy.  
World-class news plus local traffic and  
weather.  
Sign up for SiriusXM Satellite Radio  
today!  
1. Select the icon. The tag is stored in  
the audio unit.  
2. Connect the device via USB. The  
tag is sent to the connected device  
automatically.  
*Some models.  
5
–47  
Interior Features  
Audio System  
NOTE  
Displaying the Radio ID (ESN)  
ꢀyꢀTo listen to SiriusXM, a prior  
subscription (fee-based) is required.  
ꢀyꢀThe channels which you can receive  
depend on the package you subscribe  
to.  
When channel 0 is selected, the radio ID is  
displayed. Use the PREVIOUS or NEXT  
channel buttons to select channel 0.  
ꢀyꢀSatellite radio is broadcast as Sirius,  
XM, and SiriusXM in the U.S.A.,  
and Sirius and XM in Canada. In  
this owner’s manual, only the name  
SiriusXM is used.  
ꢀyꢀFor traffic and weather channels, map  
information is not displayed and only  
audio broadcasts can be received.  
ꢀyꢀCall 888-539-7474 to activate. For  
more information, visit www.siriusxm.  
com. Satellite radio is only available in  
regions providing satellite radio service  
(some areas of the United States and  
Canada). Contact Authorized Mazda  
Dealer for details.  
How to Activate Satellite Radio  
You must call SiriusXM to activate your  
service. Activation is free and takes only a  
few minutes.  
SiriusXM service uses an ID code to  
identify your radio. This code is needed to  
activate SiriusXM service, and report any  
problems.  
Please have the following information  
ready:  
ꢀyꢀ  
Radio ID (8-digit electronic serial no -  
See below for how to find your ESN)  
ꢀyꢀ  
Valid credit card information (may not  
be required at initial sign-up)  
Be sure you are parked outside with a clear  
view of open sky, you will be instructed  
to turn on your radio (in SiriusXM mode  
and tuned to channel 184 (Sirius)/1 (XM  
and SiriusXM)). Activation typically takes  
only 2—5 minutes.  
5
–48  
Interior Features  
Audio System  
SiriusXM operation  
Select the icon on the home screen to display the Entertainment screen. When  
selected, the following icons are indicated in the bottom part of the center display.  
is  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Displays the channel list of the current category.  
Displays the favorites list. Long-press to store the channel currently being aired.  
Refer to Operating the Radio on page 5-44.  
Indicates that the parental lock function is in use.  
Switching of Lock/Unlock and PIN code setting changes can be performed.  
Plays each channel in the current channel list for 5 seconds.  
Select again to continue receiving the channel.  
Plays the previous channel.  
Plays the next channel.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-42.  
5
–49  
Interior Features  
Audio System  
Selection from channel list  
4. Input the default code [0000] using the  
number buttons.  
Receivable channels can be displayed on  
the channel list screen. You can easily  
select the channel you want to listen  
from the list. Each category can be also  
displayed.  
5. Select  
.
6. Input the new PIN code using the  
number buttons.  
7. Select  
.
1. Select the  
channel list.  
2. Select a desired channel.  
icon to display the  
(Select from category list)  
1. Select the  
channel list.  
2. Select  
list.  
icon to display the  
to display the category  
3. Select a desired category.  
Parental lock  
If a channel is locked, the channel is  
muted.  
To use the parental lock function, the PIN  
code must be initialized first.  
By using the session lock, the parental  
lock can be enabled or disabled during the  
current drive cycle (from when the ignition  
is switched on to switched off). When  
the session lock is on, the parental lock is  
available. When the session lock is off, the  
parental lock is temporarily cancelled.  
When canceling the parental lock or  
session lock, or when changing the PIN  
code, PIN code input is required.  
PIN code reset  
If the registered code has been forgotten,  
reset the code to the default [0000] code.  
1. Select the icon.  
2. If the selected channel is locked, input  
the PIN code to cancel the parental lock  
temporarily.  
3. Select  
.
5
–50  
MEMO  
5
–51  
Interior Features  
Audio System  
Operating the Compact Disc (CD) Player*  
CD eject button  
CD slot  
Ejecting the CD  
Type  
Playable data  
y
y
Music/MP3/WMA/  
AAC CD player  
Music data (CD-DA)  
MP3/WMA/AAC file  
Press the CD eject button ( ) to eject the  
CD.  
NOTE  
If a disc has both music data (CD-DA)  
and MP3/WMA/AAC files, playback of the  
two or three file types differs depending on  
how the disc was recorded.  
Inserting the CD  
Insert the CD into the slot, label-side up.  
The auto-loading mechanism will set the  
CD and begin play.  
NOTE  
There will be a short lapse before play  
begins while the player reads the digital  
signals on the CD.  
*Some models.  
5
–52  
Interior Features  
Audio System  
Playback  
Select the icon on the home screen with a CD inserted and display the Entertainment  
screen. When  
display.  
is selected, the following icons are indicated in the lower part of the center  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
(Music CD)  
Displays the track list of the CD.  
Select the track you want to play.  
(MP3/WMA/AAC CD)  
Displays the top level folder/file list.  
Select the folder you want to select.  
The files in the selected folder are displayed.  
Select the file you want to play.  
(MP3/WMA/ACC CDs only)  
Displays the file list of the folder currently being played.  
Select the song you want to listen to.  
(Music CD)  
Replays the song currently being played repeatedly.  
Select it again to cancel.  
(MP3/WMA/AAC CD)  
Replays the song currently being played repeatedly.  
When selected again, the songs in the folder are played repeatedly.  
Select it again to cancel.  
(Music CD)  
Plays songs on the CD in random order.  
Select it again to cancel.  
(MP3/WMA/AAC CD)  
Plays songs in the folder in random order.  
When selected again, the songs on the CD are played in random order.  
Select it again to cancel.  
(Music CD)  
The beginning of each track on a CD is played to aid in searching for a desired track.  
When selected again, the operation is canceled and the song currently being played  
continues.  
(MP3/WMA/AAC CD)  
The beginning of each track in a folder is played to aid in searching for a desired track.  
When selected again, the operation is canceled and the song currently being played  
continues.  
If the audio is operated during scan-play, the track being scan-played is played normally.  
Then, the audio operation is performed.  
If selected within a few seconds of a song which has started to play, the previous song is  
selected.  
If more than a few seconds have elapsed after a song has begun to play, the song currently  
being played is replayed from the beginning.  
Long-press to fast reverse. It stops when you remove your hand from the icon or the  
commander knob.  
5
–53  
Interior Features  
Audio System  
Icon  
Function  
Plays a CD. When selected again, playback is temporarily stopped.  
Advances to the beginning of the next song.  
Long-press to fast forward. It stops when you remove your hand from the icon or the  
commander knob.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-42.  
Example of use (When searching for  
a song from the top level of an MP3/  
WMA/AAC CD)  
How to use Auxiliary jack/USB  
port  
Audio can be heard from the vehicle's  
speakers by connecting a commercially-  
available portable audio unit to the  
auxiliary jack.  
1. Select the icon and display the  
folder/file list at the top level.  
Use a commercially-available, non-  
impedance (3.5 ) stereo mini plug cable.  
In addition, audio can be played from the  
vehicle audio device by connecting a USB  
device or an iPod to the USB port.  
Refer to AUX/USB/iPod mode on page  
5-59.  
2. When the folder is selected, folders/file  
lists in the folder are displayed.  
3. Select the desired song.  
NOTE  
ꢀyꢀSelect to move to a folder one level  
higher.  
ꢀyꢀThe appearance of the repeat and  
shuffle icons changes depending on the  
type of operation in which the function  
is used.  
5
–54  
Interior Features  
Audio System  
Settings  
NOTE  
Depending on the grade and specification, the screen display may differ.  
Select the icon on the home screen and display the Settings screen.  
Switch the tab and select the setting item you want to change.  
You can customize settings in the setup display as follows:  
Tab  
AD-Disp  
Display  
Safety  
Item  
Function  
Height  
Brightness Control  
Other  
Refer to Active Driving Display on page 4-18.  
Refer to Volume/Display/Sound Controls on page 5-42.  
Smart City Brake Support  
Blind Spot Monitoring Volume  
Other  
Refer to Personalization Features on page 9-12.  
Sound  
Refer to Volume/Display/Sound Controls on page 5-42.  
Displays the currently set time is displayed.  
Press to advance the hour/minute, and select  
to move the hour/minute back.  
AM/PM can only be selected with the 12-hour  
clock display.  
Adjust Time  
GPS Sync  
When ON is selected, “Adjust Time” is  
disabled.  
Clock  
Changes the display between 12 and 24-hour  
clock time.  
Time Format  
Time Zone Select  
Selects the time zone.  
Turns the daylight saving time setting on/off.  
When ON, the time advances 1 hour. When  
OFF, it returns to normal time.  
Daylight Savings Time  
Rain Sensing Wiper  
Door Locks  
Other  
Vehicle  
Devices  
Refer to Personalization Features on page 9-12.  
Refer to Bluetooth® Preparation (Type B) on  
page 5-94.  
Bluetooth®  
5
–55  
Interior Features  
Audio System  
Tab  
Item  
Function  
Turns button explanations ON/OFF.  
Changes the language.  
Tool Tips  
Language  
Changes the setting between Fahrenheit and  
Celsius.  
Temperature  
Changes the setting between miles and  
kilometers.  
Distance  
Used to update Gracenote®. Gracenote is used  
with USB Audio, and provides:  
1.Supplemental music information (Such as  
song name, artist name)  
2.Voice recognition assistance for Play Artist  
and Play Album  
Gracenote can be downloaded from the Mazda  
Handsfree Website.  
Music Database Update  
System  
Refer to Gracenote Database (Type B) on page  
5-75.  
Memory and settings are initialized to the  
factory settings.  
The initialization launches by selecting the  
Restore All Factory Settings  
button.  
Agreements and  
Disclaimers  
Verify the disclaimer and agree.  
About  
Can verify the current audio unit OS version  
and Gracenote Database version.  
Version Information  
5
–56  
Interior Features  
Audio System  
Applications  
Audio Control Switch  
Operation*  
NOTE  
Depending on the grade and specification,  
the screen display may differ.  
Without Bluetooth® Hands-Free  
Select the icon on the home screen to  
display the Applications screen. The  
following information can be verified.  
Top screen  
Item  
Function  
HD  
Radio™  
Traffic  
Map*  
—
—
Fuel Consumption  
Control Status  
(Vehicles with  
i-ELOOP)  
Fuel  
Economy  
Monitor  
Refer to Fuel  
Economy Monitor  
on page 4-85.  
Settings  
Refer to  
With Bluetooth® Hands-Free  
Scheduled  
Maintenance  
Monitor (Type B  
audio) on page  
6-20.  
Maintenance  
Tire Rotation  
Oil Change  
Maintenance  
Refer to If a  
Warning Light  
Turns On or  
Flashes on page  
7-24.  
Warnings  
currently active  
can be verified.  
Warning  
Guidance  
*Some models.  
5
–57  
Interior Features  
Audio System  
USB Audio/Bluetooth® Audio /CD  
Adjusting the Volume  
Press the seek switch ( ) to skip forward  
to the beginning of the next track.  
Press the seek switch ( ) within a few  
seconds after playback begins to track  
down to the beginning of the previous  
track.  
To increase the volume, press up the  
volume switch ( ).  
To decrease the volume, press down the  
volume switch ( ).  
Press the seek switch ( ) after a few  
seconds have elapsed to start playback  
from the beginning of the current track.  
Press and hold the seek switch (  
,
) to  
continuously switch the tracks up or down.  
Seek Switch  
AM/FM radio  
Pandora®/Aha™/Stitcher™ Radio  
(Type B)  
Press the seek switch ( ) to skip forward  
to the beginning of the next track.  
Press and hold the seek switch ( ) to  
evaluate the playback of the current song  
as “Like”.  
Press and hold the seek switch ( ) to  
evaluate the playback of the current song  
as “Dislike”.  
Press the seek switch (  
switches to the next/previous stored station  
in the order that it was stored.  
Press and hold the seek switch (  
seek all usable stations at a higher or lower  
frequency whether programmed or not.  
,
). The radio  
,
) to  
Radio stations which have been previously  
stored in the auto memory tuning (Type  
A)/favorite radio (Type B) can be called  
Mute Switch*  
Press the mute switch ( ) once to mute  
audio, press it again to resume audio  
output.  
up by pressing the seek switch (  
,
)
while any radio station stored in the auto  
memory tuning (Type A)/favorite radio  
(Type B) is being received. Radio stations  
can be called up in the order they were  
stored with each press of the switch  
NOTE  
If the ignition is switched off with the  
audio muted, the mute will be canceled.  
Therefore, when the engine is restarted,  
the audio is not muted. To mute the audio  
again, press the mute switch ( ).  
(
,
).  
*Some models.  
5
–
58  
Interior Features  
Audio System  
Type A (Without CD player)  
AUX/USB/iPod mode  
Audio can be heard from the vehicle's  
speakers by connecting a commercially-  
available portable audio unit to the  
auxiliary jack.  
A commercially-available, non-impedance  
(3.5 ) stereo mini plug cable is required.  
Contact an Authorized Mazda Dealer for  
details.  
Auxiliary jack/USB port  
In addition, audio can be played from the  
vehicle audio device by connecting a USB  
device or an iPod to the USB port.  
NOTE  
Type A (With CD player)  
(Type B)  
The SD card slot is for the navigation  
system. For vehicles with the navigation  
system, the SD card (Mazda genuine) with  
stored map data is inserted into the SD  
card slot and used.  
Auxiliary jack/USB port  
Type B (Without CD player)  
USB port Auxiliary jack  
5
–59  
Interior Features  
Audio System  
Type B (With CD player)  
CAUTION  
ꢀ¾ꢀ  
Always close the auxiliary jack/USB port  
lid when it is not in use. If foreign matter  
or liquid penetrates the auxiliary jack/  
USB port, it may cause a malfunction.  
Auxiliary jack  
ꢀ¾ꢀ  
Depending on the portable audio  
device, noise may occur when the device  
is connected to the vehicle accessory  
socket. (If noise occurs, do not use the  
accessory socket.)  
USB port  
NOTE  
ꢀyꢀThis mode may not be usable depending  
on the portable audio device to be  
connected.  
ꢀyꢀBefore using the auxiliary jack/USB  
port, refer to the instruction manual for  
the portable audio device.  
ꢀyꢀUse a commercially-available, non-  
impedance (3.5 ) stereo mini plug for  
connecting the portable audio unit to  
the auxiliary jack. Before using the  
auxiliary jack, read the manufacturer's  
instructions for connecting a portable  
audio unit to the auxiliary jack.  
How to use AUX mode  
(Type A) ................................page 5-62  
How to use USB mode  
(Type A) ................................page 5-64  
How to use iPod mode  
(Type A) ................................page 5-68  
How to use AUX mode  
(Type B) ................................page 5-71  
How to use USB mode  
(Type B) ................................page 5-71  
WARNING  
Do not adjust the portable audio unit  
or a similar product while driving the  
vehicle:  
ꢀyꢀTo prevent discharging of the battery,  
do not use the auxiliary input for long  
periods with the engine off or idling.  
ꢀyꢀWhen connecting a device to the  
auxiliary jack or USB port, noise may  
occur depending on the connected  
device. If the device is connected to the  
vehicle's accessory socket, the noise can  
be reduced by unplugging it from the  
accessory socket.  
Adjusting the portable audio unit  
or a similar product while driving  
the vehicle is dangerous as it could  
distract your attention from the vehicle  
operation which could lead to a serious  
accident. Always adjust the portable  
audio unit or a similar product while  
the vehicle is stopped.  
5
–60  
Interior Features  
Audio System  
Type B (With CD player)  
How to connect USB port/  
Auxiliary jack  
Type A (Without CD player)  
USB port  
Auxiliary jack  
USB port  
Auxiliary jack  
Connecting a device  
1. Open the console lid (with CD player).  
2. If there is a cover on the AUX jack or  
USB port, remove the cover.  
Type A (With CD player)  
3. Connect the connector on the device to  
the USB port.  
USB port  
Auxiliary jack  
Connecting with a connector cable  
1. Open the console lid (with CD player).  
2. If there is a cover on the AUX jack or  
USB port, remove the cover.  
3. Connect the device plug/connector  
cable to the auxiliary jack/USB port.  
For vehicles with a CD player, pass the  
device plug/connector cable through  
the notch in the console and connect.  
Type B (Without CD player)  
WARNING  
USB port  
Auxiliary jack  
Do not allow the connection plug cord  
to get tangled with the parking brake or  
the shift lever:  
Allowing the plug cord to become  
tangled with the parking brake or  
the shift lever is dangerous as it could  
interfere with driving, resulting in an  
accident.  
5
–61  
Interior Features  
Audio System  
CAUTION  
Do not place objects or apply force to  
the auxiliary jack/USB port with the  
plug connected.  
NOTE  
ꢀyꢀInsert the plug into the auxiliary jack/  
USB port securely.  
ꢀyꢀInsert or pull out the plug with the plug  
perpendicular to the auxiliary jack/USB  
port hole.  
ꢀyꢀInsert or remove the plug by holding its  
base.  
How to use AUX mode (Type A)  
1. Switch the ignition to ACC or ON.  
2. Press the power/volume dial to turn the  
audio system on.  
3. Press the media button ( ) of the  
audio unit to change to the AUX mode.  
NOTE  
ꢀyꢀWhen the device is not connected to the  
auxiliary jack, the mode does not switch  
to the AUX mode.  
ꢀyꢀSet the volume of the portable audio  
unit to the maximum within the range  
that the sound does not become  
distorted, then adjust the volume using  
the power/volume dial of the audio  
unit or the up/down switch of the audio  
control switch.  
ꢀyꢀAudio adjustments other than audio  
volume can only be done using the  
portable audio device.  
ꢀyꢀIf the connection plug is pulled out from  
the auxiliary jack while in AUX mode,  
noise may occur.  
5
–62  
MEMO  
5
–63  
Interior Features  
Audio System  
How to use USB mode (Type A)  
Random button Audio display  
Repeat button Text button Play/Pause button  
Track down/Reverse button  
Track up/Fast-forward button  
Folder up button  
Folder down button  
Media/Scan button  
ꢀyꢀPlayback of the USB device is in the  
order of the folder numbers. Folders  
which have no MP3/WMA/AAC files are  
skipped.  
ꢀyꢀDo not remove the USB device while  
in the USB mode. The data may be  
damaged.  
Type  
USB mode  
Playable data  
MP3/WMA/AAC file  
This unit does not support a USB 3.0  
device. In addition, other devices may not  
be supported depending on the model or  
OS version.  
Pause  
Playback  
To stop playback, press the play/pause  
button (4).  
Press the button again to resume playback.  
1. Switch the ignition to ACC or ON.  
2. Press the power/volume dial to turn the  
audio system on.  
3. Press the media button (  
) to  
Fast-forward/Reverse  
switch to the USB mode and start  
playback.  
Press and hold the fast-forward button (  
to advance through a track at high speed.  
Press and hold the reverse button ( ) to  
reverse through a track at high speed.  
)
NOTE  
ꢀyꢀSome devices such as smart phones may  
require a setting change to allow USB  
operation.  
Track search  
Press the track up button ( ) once to skip  
ꢀyꢀWhen the USB device is not connected,  
the mode does not switch to USB mode.  
ꢀyꢀWhen there is no playable data in the  
USB device, “NO CONTENTS”is  
flashed.  
forward to the beginning of the next track.  
Press the track down button ( ) within a  
few seconds after playback begins to track  
down to the beginning of the previous  
track.  
Press the track down button ( ) after a  
few seconds have elapsed to start playback  
from the beginning of the current track.  
5
–64  
Interior Features  
Audio System  
Folder search  
Random playback  
To change to the previous folder, press the  
folder down button ( ), or press the folder  
up button ( ) to advance to the next  
folder.  
Tracks are randomly selected and played.  
Folder random  
1. Press the random button (2) during  
playback to play the tracks in the  
folder randomly. “FOLDER RDM” is  
displayed.  
2. To cancel the random playback, press  
the button again after 3 seconds.  
Music Scan  
This function scans the titles in a folder  
currently being played and plays ten  
seconds of each song to aid you in finding  
a song you want to listen to.  
Press and hold the scan button (  
during playback to start the scan play  
)
All random  
1. Press the random button (2) during  
playback, and then press the button  
again within 3 seconds to play the  
tracks in the USB device randomly.  
“ALL RDM” is displayed.  
operation (the track number will flash).  
)
Press and hold the scan button (  
again to cancel scan playback.  
NOTE  
If the unit is left in scan, normal playback  
will resume where scan was selected.  
2. Press the button again to cancel the  
random playback.  
Repeat playback  
Switching the display  
For files with a file name and other  
information that have been input, the  
display switches between display of the  
file name and other information each  
time the text button (3) is pressed during  
playback.  
Track repeat  
1. Press the repeat button (1) during  
playback to play the current track  
repeatedly. “TRACK RPT” is  
displayed.  
2. To cancel the repeat playback, press the  
button again after 3 seconds.  
File number/Elapsed time display  
Folder number/File number  
File name  
Folder repeat  
1. Press the repeat button (1) during  
playback, and then press the button  
again within 3 seconds to play the  
tracks in the current folder repeatedly.  
“FOLDER RPT” is displayed.  
2. Press the button again to cancel the  
repeat playback.  
Folder name  
Album name  
Song name  
Artist name  
5
–65  
Interior Features  
Audio System  
NOTE  
ꢀyꢀThe information (artist name, music  
name) is displayed only when the USB  
device information in the USB device  
has information which can be displayed  
on the screen.  
ꢀyꢀThis unit cannot display some  
characters. Characters which cannot be  
displayed are indicated by an asterisk  
( ).  
Display scroll  
Only 13 characters can be displayed at one  
time. To display the rest of the characters  
of a long title, press and hold the text  
button (3). The display scrolls the next 13  
characters. Press and hold the text button  
(3) again after the last 13 characters have  
been displayed to return to the beginning  
of the title.  
NOTE  
The number of characters which can be  
displayed is restricted.  
Error Messages  
When the message “CHECK USB” is  
displayed, it indicates that there is some  
error in the USB device. Verify that the  
content recorded in the USB device has  
MP3/WMA/AAC files and re-connect  
correctly. If the message reappears, have  
the unit checked by an Authorized Mazda  
Dealer.  
5
–66  
MEMO  
5
–67  
Interior Features  
Audio System  
How to use iPod mode (Type A)  
Audio display  
Text button  
Play/Pause button  
Random button  
Repeat button  
Category down button  
Category up button  
Track down/Reverse button  
Track up/Fast-forward button  
List up button  
List down button  
Media/Scan button  
An iPod may not be compatible depending  
on the model or OS version. In this case,  
an error message is displayed.  
Fast-forward/Reverse  
Press and hold the fast-forward button (  
to advance through a track at high speed.  
Press and hold the reverse button ( ) to  
reverse through a track at high speed.  
)
NOTE  
The iPod functions on the iPod cannot  
be operated while it is connected to the  
unit because the unit controls the iPod  
functions.  
Track search  
Press the track up button ( ) once to skip  
forward to the beginning of the next track.  
Press the track down button ( ) within a  
few seconds (depends on iPod software  
version) after playback begins to track  
down to the beginning of the previous  
track.  
Playback  
1. Switch the ignition to ACC or ON.  
2. Press the power/volume dial to turn the  
audio system on.  
3. Press the media button (  
) to  
Press the track down button ( ) after a  
few seconds (depends on iPod software  
version) have elapsed to start playback  
from the beginning of the current track.  
switch to the iPod mode and start  
playback.  
NOTE  
Category search  
ꢀyꢀWhen an iPod is not connected, the  
mode does not switch to the iPod mode.  
ꢀyꢀWhen there is no playable data in the  
iPod, “NO CONTENTS” is flashed.  
ꢀyꢀDo not remove the iPod while in the  
iPod mode. Otherwise, the data could  
be damaged.  
Press the category down button (5) to  
select the previous category and press the  
category up button (6) to select the next  
category.  
NOTE  
The types of categories include Playlist,  
Artist, Album, Song, Podcast, Genre,  
Composer, and Audio book.  
Pause  
To stop playback, press the play/pause  
button (4).  
Press the button again to resume playback.  
5
–68  
Interior Features  
Audio System  
List search  
Album random  
Press the list down button ( ) to select the  
previous list and press the list up button  
( ) to select the next list.  
1. Press the random button (2) during  
playback, and then press the button  
again within 3 seconds to play the  
tracks in the iPod randomly. “ALBUM  
RDM” is displayed.  
NOTE  
When the selected category is Song or  
Audio book, there is no list.  
2. Press the button again to cancel the  
random playback.  
Music Scan  
NOTE  
This function scans the titles in a list  
currently being played and plays 10  
seconds of each song to aid you in finding  
a song you want to listen to.  
The track number being played randomly  
is in the order of the iPod shuffle table.  
Switching the display  
Press and hold the scan button (  
during playback to start the scan play  
operation (the track number will flash).  
Press and hold the scan button (  
again to cancel scan playback.  
)
For files with a file name and other  
information that have been input, the  
display switches between display of the  
file name and other information each  
time the text button (3) is pressed during  
playback.  
)
NOTE  
If the unit is left in scan, normal playback  
will resume where scan was selected.  
File number/Elapsed time  
Repeat playback  
1. Press the repeat button (1) during  
playback to play the current track  
repeatedly. “TRACK RPT” is  
displayed.  
Category (Playlist title/Genre  
title /Composer title/Podcast title)  
2. Press the button again to cancel the  
repeat playback.  
Artist name  
Album name  
Song name  
Random playback  
Tracks are randomly selected and played.  
Song random  
1. Press the random button (2) during  
playback to play the tracks in the list  
randomly. “SONG RDM” is displayed.  
2. To cancel the random playback, press  
the button again after 3 seconds.  
5
–69  
Interior Features  
Audio System  
NOTE  
Error Indications (Type A)  
ꢀyꢀThe information (artist name, music  
name) is displayed only when the iPod  
has information which can be displayed.  
ꢀyꢀThis unit cannot display some  
characters. Characters which cannot be  
displayed are indicated by an asterisk  
( ).  
If you see an error indication on the  
display, find the cause in the chart. If you  
cannot clear the error indication, take the  
vehicle to an Authorized Mazda Dealer.  
Indication  
Cause  
Solution  
Verify that the content  
recorded in the USB  
device has MP3/WMA/  
AAC files and re-  
Display scroll  
13 characters can be displayed at one  
time. To display the rest of the characters  
of a long title, press and hold the text  
button (3). The display scrolls the next 13  
characters. Press and hold the text button  
(3) again after the last 13 characters have  
been displayed to return to the beginning  
of the title.  
CHECK  
USB  
USB device  
malfunction  
connect correctly.  
If the error indication  
continues to display,  
consult an Authorized  
Mazda Dealer.  
Verify that the content  
recorded in the iPod has  
playable files and re-  
connect correctly.  
CHECK  
iPod  
iPod  
malfunction If the error indication  
continues to display,  
NOTE  
consult an Authorized  
Mazda Dealer.  
The number of characters which can be  
displayed is restricted.  
Error Messages  
If the message “CHECK iPod” is  
displayed, it indicates that there is a  
malfunction in the iPod. Verify that the  
content recorded in the iPod has playable  
files and connect correctly. If the message  
reappears, have the unit checked by an  
Authorized Mazda Dealer.  
5
–70  
Interior Features  
Audio System  
How to use AUX mode (Type B)  
1. Select the icon on the home screen and display the Entertainment screen.  
2. Select to switch to the AUX mode. The following icons are displayed in the lower  
part of the center display.  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-42.  
NOTE  
ꢀyꢀIf a device is not connected to the auxiliary jack, the mode does not switch to the AUX  
mode.  
ꢀyꢀSet the volume of the portable audio unit to the maximum within the range that the  
sound does not become distorted, then adjust the volume using the volume dial of the  
commander switch or the up/down switch of the audio control switch.  
ꢀyꢀAudio adjustments can also be made using the portable audio device's volume setting.  
ꢀyꢀIf the connection plug is pulled out from the auxiliary jack while in AUX mode, noise may  
occur.  
How to use USB mode (Type B)  
Type  
Playable data  
MP3/WMA/AAC/OGG file  
USB mode  
This unit does not support a USB 3.0 device. In addition, other devices may not be  
supported depending on the model or OS version.  
USB devices formatted to FAT32 are supported (USB devices formatted to other formats  
such as NTFS are not supported).  
5
–71  
Interior Features  
Audio System  
Playback  
1. Select the icon on the home screen and display the Entertainment screen.  
2. Select  
or  
lower part of the center display.  
to switch the USB mode. The following icons are displayed in the  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Category list is displayed.  
Current track list is displayed.  
Select a desired track to play it.  
Plays the current track repeatedly.  
Select it again to play the tracks in the current track list repeatedly.  
When selected again, the function is canceled.  
Tracks in the current track list are played randomly.  
Select it again to cancel.  
Starts playing a track similar to the current track using Gracenote's More Like This™.  
Select the desired song from the category list to cancel More Like This™.  
If selected within a few seconds from the beginning of a song which has started to play, the  
previous song is selected.  
If more than a few seconds have elapsed, the song currently being played is replayed from  
the beginning.  
Long-press to fast reverse. It stops when you remove your hand from the icon or the  
commander knob.  
Track is played. When selected again, playback is temporarily stopped.  
Advances to the beginning of the next song.  
Long-press to fast forward.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-42.  
NOTE  
ꢀyꢀTo move to the desired location on the track, move the slider indicating the playback time.  
ꢀyꢀThe appearance of the repeat and shuffle icons changes depending on the type of  
operation in which the function is used.  
5
–72  
Interior Features  
Audio System  
Category list  
Select the icon and display the following category list.  
Select a desired category and item.  
Category  
Function  
Playlist  
Artist  
Displays playlists on the device.  
Displays the artist name list.  
All the tracks or tracks for each album of the selected artist can be played.  
Album  
Song  
Displays the album name list.  
All the tracks in the device are displayed.  
Displays the genre list.  
All the tracks or tracks per album or artist in the selected genre can be played.  
Genre  
Displays the audiobook list.  
Chapters can be selected and played.  
Audiobook  
Displays the podcast list.  
Episode can be selected and played.  
(Special service for some Apple devices.)  
Podcast  
Folder  
Displays the folder/file list.  
5
–73  
Interior Features  
Audio System  
Example of use (to play all tracks in  
USB device)  
(Method 1)  
1. Select  
2. Select  
to display the category list.  
.
All the tracks in the USB device are  
displayed.  
3. Select a desired track.  
The selected track is played. All the  
tracks in the USB device can be played  
by continuing playback.  
NOTE  
Only the tracks in the desired category  
selected in Step 2 are played.  
(Method 2)*1  
1. Select  
2. Select  
to display the category list.  
.
All the folders in the USB device are  
displayed.  
3. Select  
.
All the tracks in the USB device are  
displayed.  
4. Select a desired track.  
The selected track is played. All the  
tracks in the USB device can be played  
by continuing playback.  
*1 Can be operated using an Android™  
device or USB flash memory.  
NOTE  
Only the tracks in the desired folder  
selected in Step 3 are played.  
5
–74  
Interior Features  
Audio System  
Gracenote Database (Type B)  
When a USB device is connected to this unit and the audio is played, the album name,  
artist name, genre and title information are automatically displayed if there is a match in  
the vehicle's database compilation to the music being played. The information stored in this  
device uses database information in the Gracenote music recognition service.  
CAUTION  
For information related to the most recent Gracenote database which can be used and  
how to install it, go to the Mazda Hands Free Website:  
http://www.mazdahandsfree.com  
Introduction  
Music recognition technology and related data are provided by Gracenote®. Gracenote is the  
industry standard in music recognition technology and related content delivery. For more  
information visit www.gracenote.com.  
CD and music-related data from Gracenote, Inc., copyright © 2000 to present Gracenote.  
Gracenote Software, copyright © 2000 to present Gracenote. One or more patents owned  
by Gracenote apply to this product and service. See the Gracenote website for a non-  
exhaustive list of applicable Gracenote patents. Gracenote, CDDB, MusicID, MediaVOCS,  
the Gracenote logo and logotype, and the “Powered by Gracenote” logo are either registered  
trademarks or trademarks of Gracenote in the United States and/or other countries.  
Gracenote® End User License Agreement  
This application or device contains software from Gracenote, Inc. of Emeryville, California  
(“Gracenote”. The software from Gracenote (the “Gracenote Software” enables this  
application to perform disc and/or file identification and obtain music-related information,  
including name, artist, track, and title information (“Gracenote Data” from online servers  
or embedded databases (collectively, “Gracenote Servers” and to perform other functions.  
You may use Gracenote Data only by means of the intended End-User functions of this  
application or device.  
You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers  
for your own personal non-commercial use only. You agree not to assign, copy, transfer or  
transmit the Gracenote Software or any Gracenote Data to any third party. YOU AGREE  
NOT TO USE OR EXPLOIT GRACENOTE DATA, THE GRACENOTE SOFTWARE, OR  
GRACENOTE SERVERS, EXCEPT AS EXPRESSLY PERMITTED HEREIN.  
5
–75  
Interior Features  
Audio System  
You agree that your non-exclusive license to use the Gracenote Data, the Gracenote  
Software, and Gracenote Servers will terminate if you violate these restrictions. If your  
license terminates, you agree to cease any and all use of the Gracenote Data, the Gracenote  
Software, and Gracenote Servers. Gracenote reserves all rights in Gracenote Data, the  
Gracenote Software, and the Gracenote Servers, including all ownership rights. Under no  
circumstances will Gracenote become liable for any payment to you for any information  
that you provide. You agree that Gracenote, Inc. may enforce its rights under this Agreement  
against you directly in its own name.  
The Gracenote service uses a unique identifier to track queries for statistical purposes. The  
purpose of a randomly assigned numeric identifier is to allow the Gracenote service to count  
queries without knowing anything about who you are. For more information, see the web  
page for the Gracenote Privacy Policy for the Gracenote service.  
The Gracenote Software and each item of Gracenote Data are licensed to you “AS IS.”  
Gracenote makes no representations or warranties, express or implied, regarding the  
accuracy of any Gracenote Data from in the Gracenote Servers. Gracenote reserves the right  
to delete data from the Gracenote Servers or to change data categories for any cause that  
Gracenote deems sufficient. No warranty is made that the Gracenote Software or Gracenote  
Servers are error-free or that functioning of Gracenote Software or Gracenote Servers will  
be uninterrupted. Gracenote is not obligated to provide you with new enhanced or additional  
data types or categories that Gracenote may provide in the future and is free to discontinue  
its services at any time.  
GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED,  
INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF  
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND  
NON-INFRINGEMENT. GRACENOTE DOES NOT WARRANT THE RESULTS THAT  
WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE OR ANY  
GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY  
CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR  
LOST REVENUES.  
© 2000 to present. Gracenote, Inc.  
Updating the database  
The Gracenote media database can be updated using USB device.  
1. Connect a USB device containing the software for updating Gracenote.  
2. Select the icon on the home screen and display the Settings screen.  
3. Select the  
4. Select  
displayed.  
tab and select .  
. The list of the update package stored in the USB device and the version are  
5. Select the package to use the update.  
6. Select  
.
NOTE  
Gracenote can be downloaded from the Mazda Hands-free Website.  
5
–76  
Interior Features  
Bluetooth®  
Bluetooth®*  
Bluetooth® Hands-Free outline  
When a Bluetooth® device (mobile phone) is connected to the vehicle's Bluetooth® unit via  
radio wave transmission, a call can be made or received by pressing the talk button, pick-  
up button, or hang-up button on the audio remote control switch, or by operating the center  
display. For example, even if a device (mobile phone) is in your coat pocket, a call can be  
made without taking the device (mobile phone) out and operating it directly.  
Bluetooth® audio outline  
When a portable audio unit equipped with the Bluetooth® communication function is paired  
to the vehicle, you can listen to music stored on the paired portable audio device from the  
vehicle's speakers. It is not necessary to connect the portable audio device to the vehicle's  
external input terminal. After programming, operate the vehicle audio control panel to play/  
stop the audio.  
NOTE  
ꢀyꢀFor your safety, a device can be paired only when the vehicle is parked. If the vehicle  
starts to move, the pairing procedure will end. Park the vehicle in a safe place before  
pairing.  
ꢀyꢀThe communication range of a Bluetooth® equipped device is about 10 meters (32 ft) or  
less.  
ꢀyꢀBasic audio operation is available using voice commands even if Bluetooth® is not  
connected.  
*Some models.  
5
–77  
Interior Features  
Bluetooth®  
CAUTION  
Some Bluetooth® mobile devices are not compatible with the vehicle. Consult an  
Authorized Mazda Dealer, Mazda's call center or Web support center for information  
regarding Bluetooth® mobile device compatibility:  
ꢀ¾ꢀ  
U.S.A.  
Phone: 800-430-0153  
ꢀ
ꢀ
Web: www.MazdaUSA.com/bluetooth  
ꢀ¾ꢀ  
Canada  
ꢀ
Phone: 800-430-0153  
Web: www.mazdahandsfree.ca  
ꢀ
ꢀ¾ꢀ  
Mexico  
Center of Attention to Client (CAC)  
ꢀ
ꢀ
Phone: 01-800-01-MAZDA  
Web:  
www.mazdamexico.com.mx  
ꢀ
ꢀ
Applicable Bluetooth® specification (Recommended)  
Type A: Ver. 2.0  
Type B: Ver. 1.1/1.2/2.0 EDR/2.1 EDR/3.0 (conformity)  
Component Parts  
Audio unit  
Type A  
Type B  
Talk button, Pick-up button and Hang-up button  
Talk button  
Pick-up button  
Hang-up button  
Microphone  
Microphone  
5
–78  
Interior Features  
Bluetooth®  
Microphone (hands-free)  
The microphone is used for speaking voice commands or when making a Hands-free call.  
Talk button, Pick-Up button and Hang-Up button (hands-free)  
The basic functions of Bluetooth® Hands-Free can be used for such things as making calls or  
hanging up using the talk, pick-up and hang-up buttons on the steering wheel.  
Commander switch (Type B)  
The commander switch is used for volume adjustment and display operation. Tilt or turn the  
commander knob to move the cursor. Press the commander knob to select the icon.  
Volume adjustment  
The power/volume dial of the audio unit*1 or the volume dial of the commander switch*2  
is used to adjust the volume. Turn the dial to the right to increase volume, to the left to  
decrease it.  
The volume can also be adjusted using the volume button on the steering wheel.  
*1 Type A  
*2 Type B  
NOTE  
If the volume is lower compared to other audio modes, increase the volume from the device  
side.  
(Type B)  
Conversation volume and the volume of the voice guidance and ringtone can each be set in  
advance.  
1. Select the icon on the home screen and display the Communication screen.  
.
2. Select  
3. Adjust the  
and the  
using the slider.  
5
–79  
Interior Features  
Bluetooth®  
Bluetooth® Preparation (Type A)  
Bluetooth® Hands-Free Preparation  
Pairing code setting  
Device pairing  
To use Bluetooth® Hands-Free, the device  
equipped with Bluetooth® has to be paired  
to the hands-free unit using the following  
procedure.  
A maximum of seven devices including  
hands-free mobile phones and Bluetooth®  
audio devices can be paired to one vehicle.  
The 4-digit pairing code setting for  
registration of your cell phone (pairing)  
can be set beforehand.  
NOTE  
NOTE  
If a Bluetooth® device has already been  
paired to the vehicle as a Bluetooth® audio  
device, it does not need to be paired again  
when using the device as a hands-free  
mobile phone. Conversely, it does not need  
to be paired again as a Bluetooth® audio  
device if it has already been paired as a  
hands-free mobile phone.  
The initial setting value is “0000”.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
4. Say: [Beep] “Pairing options”  
5. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code.”  
6. Say: [Beep] “Set pairing code”  
7. Prompt: “Your current pairing code is  
XXXX. Do you want to change it to a  
different pairing code?”  
1. Activate the Bluetooth® application of  
the device.  
NOTE  
For the operation of the device, refer to its  
instruction manual.  
2. Press the pick-up button or talk button  
with a short press.  
3. Say: [Beep] “Setup”  
8. Say: [Beep] “Yes”  
9. Prompt: “Please say a 4-digit pairing  
code.”  
10.Say: [Beep] “YYYY”  
11.Prompt: “YYYY is this correct?”  
12.Say: [Beep] “Yes” or “No”  
13.If “Yes”, go to Step 14. If “No”, the  
procedure returns to Step 9.  
14.Prompt: “Your new pairing code is  
YYYY. Use this pairing code when  
pairing devices to the Hands free  
system. Do you want to pair a device  
now?”  
15.Say: [Beep] “Yes” or “No”  
16.If “Yes”, the system switches to the  
device registration mode. If “No”, the  
system returns to standby status.  
4. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
5. Say: [Beep] “Pairing options”  
6. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code.”  
7. Say: [Beep] “Pair”  
8. Prompt: “Start the pairing process on  
your Bluetooth® device. Your pairing  
code is 0000 (XXXX). Input this on  
your Bluetooth® device when prompted  
on the device. See device manual for  
instructions.”  
5
–80  
Interior Features  
Bluetooth®  
NOTE  
9. Using the device, perform a search  
for the Bluetooth® device (Peripheral  
device).  
ꢀyꢀWhen the pairing is completed, the  
symbol is displayed.  
ꢀyꢀSome Bluetooth® audio devices need a  
certain amount of time before the  
symbol is displayed.  
ꢀyꢀDevice registration can also be done by  
operating the audio unit.  
ꢀyꢀDepending on the device, the  
registration status may be lost after a  
certain period of time. If this occurs,  
repeat the entire process from Step 1.  
NOTE  
For the operation of the device, refer to its  
instruction manual.  
10.Select “Mazda” from the device list  
searched by the device.  
11.Input the 4-digit pairing code to the  
device.  
12.Prompt: “Please say the name of the  
device after the beep.”  
13.Say: [Beep] “XXXX - - -” (Say a  
“device tag”, an arbitrary name for the  
device.) Example: “Stan's device.”  
Registered device read-out  
Bluetooth® Hands-Free can read-out the  
devices registered to its system.  
NOTE  
NOTE  
Say a paired “device tag” within 10  
seconds.  
If more than two devices are to be paired,  
they cannot be paired with the same or  
similar “device tag”.  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to be  
effective.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
4. Say: [Beep] “Pairing options”  
5. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code”  
14.Prompt: “XXXXXX - - - (Ex. “Stan's  
device”) (Device tag). Is this correct?”  
15.Say: [Beep] “Yes”  
16.Prompt: “Pairing complete”  
After a device is registered, the system  
automatically identifies the device. By  
activating Bluetooth® Hands-Free again,  
or by activating Bluetooth® Hands-Free  
first after switching the ignition from  
OFF to ACC, the system reads out a voice  
guidance, “XXXXXX - - - (Ex. “Stan's  
device”) (Device tag) is connected”.  
6. Say: [Beep] “List”  
5
–81  
Interior Features  
Bluetooth®  
7. Prompt: “XXXXX..., XXXXX...,  
XXXXX... (Ex. Device A, device B,  
device C)” (The voice guidance reads  
out the device tags registered to the  
hands-free system.)  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
4. Say: [Beep] “Select phone”  
5. Prompt: “Please say the name of  
the device you would like to select.  
Available devices are XXXXX... (Ex.  
device A), XXXXX... (Ex. device B),  
XXXXX... (Ex. device C). Which  
device please?”  
Press the talk button with a short press  
during the read-out at the desired  
device, and then say one of the  
following voice commands to execute  
it.  
6. Say: [Beep] “XXXXX... (Ex. Device  
B)”  
7. Prompt: “XXXXX... (Ex. Device B).  
Is this correct?”  
8. Say: [Beep] “Yes” or “No”  
9. If “Yes”, go to Step 10. If “No”, the  
procedure returns to Step 5.  
10.Prompt: “XXXXX... (Ex. Device B)  
selected.”  
ꢀ
ꢀ
y “Select phone”: Selects device (Mobile  
phone) when the talk button is short-  
pressed.  
ꢀ
ꢀ
y “Select music player”: Selects device  
(Music player) when the talk button is  
short-pressed.  
ꢀ
ꢀ
y “Edit”: Edits device when the talk  
button is short-pressed.  
ꢀ
ꢀ
y “Continue”: Continues the list readout.  
ꢀ
ꢀ
y “Delete”: Deletes the registered device  
when the talk button is short-pressed.  
(Music player)  
ꢀ
ꢀ
y “Previous”: Returns to the previous  
device in read-out when the talk button  
is short-pressed.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
8. Prompt: “End of list, would you like to  
start from the beginning?”  
9. Say: [Beep] “No”  
10.Prompt: “Returning to main menu.”  
4. Say: [Beep] “Select music player”  
5. Prompt: “Please say the name of  
the device you would like to select.  
Available devices are XXXXX... (Ex.  
device A), XXXXX... (Ex. device B),  
XXXXX... (Ex. device C). Which  
device please?”  
6. Say: [Beep] “XXXXX... (Ex. Device  
B)”  
7. Prompt: “XXXXX... (Ex. Device B).  
Is this correct?”  
Device selection  
If several devices have been paired, the  
Bluetooth® unit links the device last  
paired. If you would like to link a different  
paired device, it is necessary to change the  
link. The order of device priority after the  
link has been changed is maintained even  
when the ignition is switched off.  
(Hands-free phone)  
8. Say: [Beep] “Yes” or “No”  
9. If “Yes”, go to Step 10. If “No”, the  
procedure returns to Step 5.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
5
–82  
Interior Features  
Bluetooth®  
10.Prompt: “XXXXX... (Ex. Device B)  
selected.”  
7. Prompt: “Please say the name of  
the device you would like to delete.  
Available devices are XXXXX... (Ex.  
device A), XXXXX... (Ex. device  
B), XXXXX... (Ex. device C), or all.  
Which device please?”  
NOTE  
ꢀyꢀWhen the selected device connection is  
completed, the or symbol is  
displayed.  
ꢀyꢀSome Bluetooth® audio devices need a  
certain amount of time before the or  
symbol is displayed.  
ꢀyꢀDevice (Music player) selection can  
also be done by operating the panel  
button.  
8. Say: [Beep] “X” (Say the number of  
the device to be deleted.)  
NOTE  
Say “All” to delete all devices (Mobile  
phone).  
9. Prompt: “Deleting XXXXX... (Ex.  
device B...) (Registered device tag). Is  
this correct?”  
Deleting a device  
10.Say: [Beep] “Yes”  
11.Prompt: “Deleted”  
Registered devices (Mobile phone) can be  
deleted individually or collectively.  
NOTE  
Registered device editing  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to be  
effective.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
4. Say: [Beep] “Pairing options”  
5. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code.”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
6. Say: [Beep] “Edit”  
4. Say: [Beep] “Pairing options”  
5. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code.”  
7. Prompt: “Please say the name of the  
device you would like to edit. Available  
devices are XXXXX... (Ex. device A),  
XXXXX... (Ex. device B), XXXXX...  
(Ex. device C). Which device please?”  
8. Say: [Beep] “X” (Say the number of  
the device to be edited.)  
NOTE  
A registered device (Mobile phone) can be  
deleted using the registration list.  
9. Prompt: “New name please?”  
10.Say: [Beep] “XXXXX... (Ex. Device  
C)” (Speak a “device tag” an arbitrary  
name for the device.)  
6. Say: [Beep] “Delete”  
11.Prompt: “XXXXX... (Ex. device C)  
(Device tag), is this correct?”  
5
–83  
Interior Features  
Bluetooth®  
12.Say: [Beep] “Yes”  
13.Prompt: “New name saved.”  
2. Turn the audio control dial and select a  
desired mode.  
Bluetooth® Audio Preparation  
Bluetooth® audio device set-up  
Bluetooth® audio pairing, changes,  
deletions, and display of paired device  
information can be performed.  
1. The mode changes as follows each time  
) is pressed.  
the menu button (  
Select “BT SETUP”.  
Display  
PAIR  
DEVICE  
Mode  
Function  
*
Bluetooth® audio  
device pairing  
Pairing mode  
Changing link to  
Bluetooth® audio  
device  
LINK Link change  
CHANGE mode  
Pairing  
PAIR  
DELETE  
mode  
Deleting link to  
Bluetooth® audio  
device  
deletion  
Device Displaying vehicle's  
information  
Bluetooth® unit  
display mode information  
DEVICE  
INFO  
*
3. Press the audio control dial to  
determine the mode.  
Bluetooth® audio device pairing  
Any Bluetooth® audio device must be  
paired to the vehicle's Bluetooth® unit  
before it can be listened to over the  
vehicle's speakers.  
* Depending on the mode selected, the  
indication changes.  
A maximum of seven devices including  
Bluetooth® audio devices and hands-  
free mobile phones can be paired to one  
vehicle.  
5
–
84  
Interior Features  
Bluetooth®  
3. Input the PIN code of your Bluetooth®  
audio device by pressing channel preset  
buttons 1 to 4 while “PIN 0000” is  
displayed.  
NOTE  
ꢀyꢀIf a Bluetooth® device has already been  
paired to the vehicle as a hands-free  
mobile phone, it does not need to be  
paired again when using the device as  
a Bluetooth® audio device. Conversely,  
it does not need to be paired again as  
a hands-free mobile phone if it has  
already been paired as a Bluetooth®  
audio device.  
Press channel preset button 1 to input  
the first digit, 2 for the second, 3 for the  
third, and 4 for the forth. For example,  
if the PIN code were “4213” press  
channel preset button 1 four times (1,  
2, 3, 4), button 2 twice (1, 2), button  
3 once (1), and button 4 three times  
(1, 2, 3). If the “PIN 0000” display  
disappears before finishing the PIN  
code input, repeat the procedure from  
Step 1.  
ꢀyꢀDevice registration can also be done  
using voice recognition.  
Concerning the operation of a Bluetooth®  
audio device itself, refer to its instruction  
manual.  
Some Bluetooth® audio devices have PIN  
codes (four digits). Refer to the audio  
device's instruction manual because the  
pairing procedure differs depending on  
whether it has a PIN code or not.  
NOTE  
Some devices accept only a particular  
pairing code (Usually, “0000” or  
“1234”).  
If pairing cannot be completed, refer to the  
owner's manual of your mobile device, and  
try those numbers if necessary.  
Pairing a Bluetooth® audio device which  
has a four-digit PIN code  
4. Press the audio control dial while  
the input PIN code is displayed.  
“PAIRING” flashes on the audio  
display.  
5. Operate the Bluetooth® audio device  
and set it to the pairing mode while  
“PAIRING” is flashing.  
6. When the pairing is completed, and  
“PAIR SUCCESS” are displayed after  
about 10-30 seconds, after which  
“PAIR SUCCESS” continues to be  
displayed for three seconds, and then  
the unit returns to the normal display.  
1. Using the audio control dial, select  
the pairing mode “PAIR DEVICE”  
in the “BT SETUP” mode. (Refer to  
“Bluetooth® audio device set-up” for  
details.)  
2. Press the audio control dial to  
determine the mode. After “ENTER  
PIN” is displayed on the audio display  
for three seconds, “PIN 0000” is  
displayed and the PIN code can be  
input.  
5
–85  
Interior Features  
Bluetooth®  
NOTE  
NOTE  
ꢀyꢀSome Bluetooth® audio devices need a  
certain amount of time before the  
symbol is displayed.  
ꢀyꢀIf the pairing failed, “Err” flashes for  
three seconds .  
ꢀyꢀPairing cannot be performed while  
the vehicle is moving. If you attempt  
to perform pairing while the vehicle is  
moving, “PAIR DISABLE” is displayed.  
ꢀyꢀIf seven Bluetooth® audio devices have  
already been paired to the vehicle,  
pairing cannot be performed and  
“MEMORY FULL” is displayed. Delete  
one paired device to pair another one.  
ꢀyꢀIf pairing cannot be completed, try  
“1234” instead. Refer to the owner's  
manual of your mobile device for the  
right PIN code.  
ꢀyꢀSome Bluetooth® audio devices need a  
certain amount of time before the  
symbol is displayed.  
ꢀyꢀIf the pairing failed, “Err” flashes for  
three seconds.  
ꢀyꢀPairing cannot be performed while  
the vehicle is moving. If you attempt  
to perform pairing while the vehicle is  
moving, “PAIR DISABLE” is displayed.  
ꢀyꢀIf seven Bluetooth® audio devices have  
already been paired to the vehicle,  
pairing cannot be performed and  
“MEMORY FULL” is displayed. Delete  
one paired device to pair another one.  
Pairing a Bluetooth® audio device which  
does not have a four-digit PIN code  
1. Using the audio control dial, select  
the pairing mode “PAIR DEVICE”  
in the “BT SETUP” mode. (Refer to  
“Bluetooth® audio set up” for details.)  
2. Press the audio control dial to  
determine the mode. After “ENTER  
PIN” is displayed on the audio display  
for three seconds, “PIN 0000” is  
displayed and the PIN code can be  
input.  
Device selection  
If several devices have been paired, the  
Bluetooth® unit links the device last  
paired. If you would like to link a different  
paired device, it is necessary to change the  
link. The order of device priority after the  
link has been changed is maintained even  
when the ignition is switched off.  
3. Press the audio control dial while “PIN  
0000” is displayed. “PAIRING” flashes  
on the audio display.  
4. Operate the Bluetooth® audio device  
and set it to the pairing mode while  
“PAIRING” is flashing.  
5. As the Bluetooth® audio device  
requires a PIN code, input “0000”.  
6. When the pairing is completed, and  
“PAIR SUCCESS” are displayed after  
about 10-30 seconds, after which  
“PAIR SUCCESS” continues to be  
displayed for three seconds, and then  
the unit returns to the normal display.  
1. Using the audio control dial, select the  
link change mode “LINK CHANGE”  
in the “BT SETUP” mode. (Refer to  
“Bluetooth® audio device set-up” for  
details.)  
2. Press the audio control dial to  
determine the mode.  
3. The name of the currently linked  
Bluetooth® audio device is displayed.  
If no Bluetooth® audio device is  
currently linked, the name of the first  
device among the paired devices is  
displayed.  
5
–86  
Interior Features  
Bluetooth®  
NOTE  
4. Turn the audio control dial to select the  
name of the device you would like to  
link.  
ꢀyꢀSome Bluetooth® audio devices need a  
certain amount of time before the  
symbol is displayed.  
ꢀyꢀIf a hands-free type mobile phone has  
been the most recently paired device,  
the Bluetooth® unit links this device.  
If you would like to use a Bluetooth®  
audio type device which has been  
previously paired to the Bluetooth® unit,  
the link must be changed to this device.  
ꢀyꢀIf an error occurs while trying to link  
a device, “Err” flashes in the audio  
display for three seconds, and the  
display returns to “LINK CHANGE”.  
If this occurs, check the pairing status  
of the Bluetooth® audio device and the  
location of the device in the vehicle (not  
in the trunk or a metal-type box), and  
then try the link operation again.  
ꢀyꢀDevice selection can also be done using  
voice recognition.  
Device name 1  
Device name 2  
Device name 3  
Device name 4  
Device name 5  
Device name 6  
Device name 7  
5. Press the audio control dial to select the  
device you would like to link. The  
symbol disappears, and “PAIRING”  
flashes in the audio display.  
How to confirm the device currently  
linked  
Switch to the link-change mode. (Refer to  
“Changing the link to a Bluetooth® audio  
device”)  
The device name displayed first is the  
device which is currently linked.  
NOTE  
When “GO BACK” is selected and the  
audio control dial is pressed, the display  
returns to “LINK CHANGE”.  
6. If the link to the desired device is  
successful, the symbol is displayed  
again, together with “LINK  
Deleting a device  
1. Using the audio control dial, select the  
pairing delete mode “PAIR DELETE”  
in the “BT SETUP”mode. (Refer to  
“Bluetooth® audio device set-up” for  
details.)  
CHANGED”. “LINK CHANGED” is  
displayed for three seconds, then it  
returns to the normal display.  
2. Press the audio control dial to  
determine the mode.  
3. The name of the first device among the  
paired devices is displayed.  
5
–87  
Interior Features  
Bluetooth®  
NOTE  
4. Rotate the audio control dial and select  
the name of the paired device you  
would like to delete.  
Select “GO BACK” and press the audio  
control dial to return to the “PAIR  
DELETE” display.  
Device name 1  
Device name 2  
Device name 3  
8. “PAIR DELETED” is displayed for  
three seconds after the deletion is  
completed, and then it returns to the  
normal display.  
NOTE  
If an error occurs while trying to delete  
the paired device, “Err” flashes in the  
display for three seconds and the display  
returns to “LINK DELETE”.  
Device name 4  
Device name 5  
Bluetooth® audio device information  
display  
Device name 6  
Device name 7  
1. Using the audio control dial, select the  
pair device information display mode  
“DEVICE INFO” in the “BT SETUP”  
mode. (Refer to “Bluetooth® audio  
device set-up” for details.)  
NOTE  
2. Press the audio control dial to  
determine the mode.  
3. The name of the Bluetooth® unit device  
is displayed.  
Only the names of paired devices can be  
displayed. If only one device is paired,  
only the name for this device is displayed.  
4. Rotate the audio control dial to select  
the information for the Bluetooth® unit  
which you would like to view.  
5. If a selection other than “GO BACK”  
is made and the audio control dial is  
pressed, “SURE ? NO” is displayed.  
6. Rotate the audio control dial clockwise  
and switch the display to “SURE ?  
YES”.  
Device name  
BT address  
NOTE  
The display changes as follows depending  
on whether the audio control dial is  
rotated clockwise or counterclockwise.  
-Clockwise: “SURE ? YES” displayed  
-Counterclockwise: “SURE ? NO”  
displayed  
NOTE  
When “GO BACK” is selected and the  
audio control dial is pressed, the display  
returns to “DEVICE INFO”.  
7. Press the audio control dial to delete  
the selected device.  
5
–88  
Interior Features  
Bluetooth®  
8. Say: [Beep] “Yes”  
Available Language (Type A)  
9. Prompt: “French (Desired language)  
selected” (Spoken in the newly selected  
language).  
The available languages are English,  
Spanish, and Canadian French. If the  
language setting is changed, all of the  
voice guidance and voice input commands  
are done in the selected language.  
(Method 2)  
1. Press the pick-up button or talk button  
with a short press.  
NOTE  
ꢀyꢀIf the language setting is changed,  
device registration is maintained.  
ꢀyꢀPhonebook records are not cleared,  
but each language has a separate  
phonebook. Therefore, entries created in  
one language will need to be re-entered  
in the phonebook of the new language.  
ꢀyꢀDo these steps before you start driving.  
These less used functions are too  
distracting to undertake while driving  
until you are fully familiar with the  
system.  
2. Say: [Beep] “French” (Say the desired  
language: “English”, “French” or  
“Spanish”). (Change the desired  
language by saying the language  
name.)  
NOTE  
Other language settings can also be made  
while in the current setting by saying  
the name of the language in the native  
pronunciation.  
3. Prompt: “Would you like to change  
the language to French (Desired  
language)?”  
(Method 1)  
4. Say: [Beep] “Yes”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
5. Prompt: “Please wait. Switching to  
French phonebook. French selected”  
(Spoken in the newly selected  
language).  
Voice Recognition (Type A)  
4. Say: [Beep] “Language”  
5. Prompt: “Select a language: English,  
French, or Spanish.”  
6. Say: [Beep] “French” (Speak the  
desired language: “English”, “French”  
or “Spanish”)  
In this section, the basic operation of the  
voice recognition is explained.  
Activating Voice Recognition  
To Activate the Main Menu: Press the  
pick-up button or talk button with a short  
press.  
NOTE  
Ending Voice Recognition  
Other language settings can also be made  
while in the current setting by saying  
the name of the language in the native  
pronunciation.  
Use one of the following methods:  
ꢀyꢀ  
Press and hold the talk-button.  
ꢀyꢀ  
Press the hang-up button.  
7. Prompt: “French (Desired language)  
selected. Is this correct?”  
5
–89  
Interior Features  
Bluetooth®  
Skipping Voice Guidance (for faster  
operation)  
Help function use  
The help function informs the user of all  
the available voice commands under the  
current conditions.  
Press and release the talk-button.  
NOTE  
ꢀyꢀThe Bluetooth® Hands-Free system  
is operable several seconds after the  
ignition is switched to ACC or ON  
(requires less than 15 seconds).  
1. Say: [Beep] “Help”  
2. Follow the prompts to receive the  
appropriate voice guidance instructions.  
ꢀyꢀWhen operating the audio unit or the  
A/C while using Bluetooth® Hands-  
Free, the beep sounds or voice guidance  
(audio unit)/cannot be heard.  
Returning to previous operation  
This command is for returning to the  
previous operation while in the voice  
recognition mode.  
Say: [Beep] “Go Back”  
To prevent a deterioration in the voice  
recognition rate and voice quality, the  
following points should be observed:  
Tutorial  
The tutorial explains how to use  
Bluetooth® Hands-Free.  
To activate the tutorial, do the following:  
ꢀyꢀ  
The voice recognition cannot be  
performed while voice guidance or  
the beep sound is operating. Wait  
until the voice guidance or the beep  
sound is finished before saying your  
commands.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Tutorial”  
3. Follow the prompts to receive the  
appropriate voice guidance instructions.  
ꢀyꢀ  
Dialects or different wording other  
than hands-free prompts cannot be  
recognized by voice recognition. Speak  
in the wording specified by the voice  
commands.  
Commands useable anytime during  
voice recognition  
“Help” or “Go Back” are commands  
which can be used at anytime during voice  
recognition.  
ꢀyꢀ  
It is not necessary to face the  
microphone or approach it. Speak the  
voice commands while maintaining a  
safe driving position.  
ꢀyꢀ  
Do not speak too slow or too loud.  
ꢀyꢀ  
Speak clearly, without pausing between  
words or numbers.  
ꢀyꢀ  
Close the windows and/or the moonroof  
to reduce loud noises from outside  
the vehicle, or turn down the airflow  
of the air-conditioning system while  
Bluetooth® Hands-Free is being used.  
ꢀyꢀ  
Make sure the vents are not directing air  
up towards the microphone.  
5
–90  
Interior Features  
Bluetooth®  
Using Bluetooth® Hands-Free with a  
passcode  
NOTE  
If the voice recognition performance is not  
satisfactory.  
Refer to Voice Recognition Learning  
Function (Speaker Enrollment) (Type A)  
on page 5-92.  
1. Press the pick-up button or talk button  
with a short press.  
2. Prompt: “Hands-Free system is  
locked. State the passcode to continue.”  
3. Say: [Beep] “XXXX” (Say the set  
passcode “PCode”.)  
Refer to Troubleshooting on page 5-131.  
4. If the correct passcode is input, voice  
guidance “XXXXXX... (Ex. “Mary's  
device”) (Device tag) is connected” is  
announced.  
Security Setting (Type A)  
If a passcode is set, the system cannot be  
activated unless the passcode is input.  
If the passcode is incorrect, voice  
guidance “XXXX (4-digit passcode,  
Pcode) incorrect passcode, please try  
again” is announced.  
NOTE  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to be  
effective.  
Canceling the passcode  
Passcode setting  
NOTE  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to be  
effective.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
4. Say: [Beep] “Passcode”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
5. Prompt: “Passcode is disabled. Would  
you like to enable it?”  
6. Say: [Beep] “Yes”  
7. Prompt: “Please say a 4-digit  
passcode. Remember this passcode. It  
will be required to use this system.”  
8. Say: [Beep] “XXXX” (Say a desired  
4-digit passcode, “PCode”.)  
4. Say: [Beep] “Passcode”  
5. Prompt:“Passcode is enabled. Would  
you like to disable it?”  
6. Say: [Beep] “Yes”  
7. Prompt:“Passcode is disabled.”  
9. Prompt:“Passcode XXXX (Passcode,  
PCode). Is this correct?”  
10.Say: [Beep] “Yes”  
11.Prompt:“Passcode is enabled.”  
5
–91  
Interior Features  
Bluetooth®  
Confirmation Prompts  
Voice Recognition Learning  
Function (Speaker Enrollment)  
(Type A)  
The confirmation prompt confirms the  
command content to the user before  
advancing to the operation requested by  
the user. When this function is turned  
on, the system reads out the voice  
input command previously received  
and confirms whether the command is  
correct before advancing to the command  
execution.  
When the confirmation prompt function is  
turned on:  
(Ex. “Calling John's device. Is this  
correct?”)  
The voice recognition learning function  
enables voice recognition appropriate to  
the characteristics of the user's voice. If the  
recognition of the voice input commands  
to the system is not adequate, this function  
can largely improve the system's voice  
recognition of the user. If your voice can  
be recognized sufficiently without using  
this function, you may not realize the  
added benefit of the function. To register  
your voice, the voice input command  
list must be read out. Read out the list  
when the vehicle is parked. Perform the  
registration in as quiet a place as possible  
5-89. The registration must be performed  
completely. The required time is a few  
minutes. The user needs to be seated in the  
driver's seat with the voice input command  
list for voice recognition learning open to  
the page indicated below.  
When the confirmation prompt function is  
turned off:  
(Ex. “Calling John's device.”)  
NOTE  
If the confirmation prompt function is  
turned off when making an emergency  
call, the system reads out and confirms the  
command before executing it.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
When voice recognition learning is done  
for the first time  
1. Press the pick-up button or talk button  
with a short press.  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
4. Say: [Beep] “Confirmation prompts”  
5. Prompt: “Confirmation prompts  
are on/off. Would you like to turn  
confirmation prompts off/on?”  
6. Say: [Beep] “Yes”  
2. Say: [Beep] “Voice training”  
3. Prompt: “This operation must be  
performed in a quiet environment while  
the vehicle is stopped. See the owner's  
manual for the list of required training  
phrases. Press and release the talk  
button when you are ready to begin.  
Press the hang-up button to cancel at  
any time.”  
7. Prompt: “Confirmation prompts are  
off/on.”  
4. Press the talk button with a short press.  
5. The voice guidance reads out the voice  
input command number (refer to the  
voice input command list for voice  
recognition learning). (Ex. “Please read  
phrase 1”)  
5
–92  
Interior Features  
Bluetooth®  
NOTE  
6. Say: [Beep] “0123456789” (Say  
the voice input command for voice  
recognition learning (1 to 8) according  
to the voice guidance.)  
7. Prompt: “Speaker enrollment is  
complete.”  
If an error occurred in the voice  
recognition learning, re-learning can be  
done by pressing the talk button with a  
short press.  
Voice input command list for voice  
recognition learning  
NOTE  
If an error occurred in the voice  
recognition learning, re-learning can be  
done by pressing the talk button with a  
short press.  
When reading out, the following points  
must be observed:  
ꢀyꢀ  
Read out the numbers one at a time  
correctly and naturally.  
Voice recognition re-learning  
ꢀ(For example, “1234” must be read out  
“one, two, three, four” not “twelve,  
thirty four”.)  
If voice recognition learning has already  
been done.  
ꢀyꢀ  
Do not read out parentheses. “(” and  
hyphens “-” are used for separating  
numbers in a phone number.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Voice training”  
3. Prompt: “Enrollment is enabled/  
disabled. Would you like to disable/  
enable or retrain?”  
Ex.  
“(888) 555-1212” must be spoken “Eight,  
eight, eight, five, five, five, one, two, one,  
two.”  
4. Say: [Beep] “Retrain”  
5. Prompt: “This operation must be  
performed in a quiet environment while  
the vehicle is stopped. See the owner's  
manual for the list of required training  
phrases. Press and release the talk  
button when you are ready to begin.  
Press the hang-up button to cancel at  
any time.”  
6. Press the talk button with a short press.  
7. The voice guidance reads out the voice  
input command number (refer to the  
voice input command list for voice  
recognition learning). (Ex. “Please read  
phrase 1”)  
8. Say: [Beep] “0123456789” (Say  
the voice input command for voice  
recognition learning (1 to 8) according  
to the voice guidance.)  
9. Prompt: “Speaker enrollment is  
complete.”  
Phrase  
Command  
0123456789  
1
2
3
4
5
6
7
8
(888) 555-1212  
Call  
Dial  
Setup  
Cancel  
Continue  
Help  
NOTE  
ꢀyꢀThe applicable phrase appears in the  
audio display.  
ꢀyꢀAfter user voice registration is  
completed, voice guidance “Speaker  
enrollment is complete” is announced.  
5
–93  
Interior Features  
Bluetooth®  
Voice recognition learning on/off  
5. Select  
to display the  
1. Press the pick-up button or talk button  
with a short press.  
message and switch to the device  
operation.  
2. Say: [Beep] “Voice training”  
3. Prompt: “Enrollment is enabled/  
disabled. Would you like to disable/  
enable or retrain?”  
4. Say: [Beep] “Disable” or “Enable”  
5. When “Disable” is spoken, the voice  
recognition learning is turned off.  
When “Enable” is spoken, the voice  
recognition learning is turned on.  
6. Prompt: “Speaker Enrollment is  
disabled/enabled.”  
6. Using your device, perform a search  
for the Bluetooth® device (Peripheral  
device).  
7. Select “Mazda” from the device list  
searched by the device.  
8. (Device with Bluetooth® version 2.0)  
Input the displayed 4-digit pairing code  
into the device.  
(Device with Bluetooth® version 2.1  
or higher)  
Make sure the displayed 6-digit code  
on the audio is also displayed on the  
Bluetooth® Preparation (Type B)  
device, and touch the  
.
Connection permission and phonebook  
access permission for your mobile  
device may be required depending on  
the mobile device.  
Device pairing  
To use Bluetooth® audio and Hands-Free,  
the device equipped with Bluetooth® has  
to be paired to the unit using the following  
procedure. A maximum of seven devices  
including Bluetooth® audio devices and  
hands-free mobile phones can be paired.  
9. If pairing is successful, the functions of  
the device connected to Bluetooth® are  
displayed.  
10.(Devices compatible with Mazda  
Email / SMS function)  
NOTE  
SMS (Short Message Service)  
messages, and E-mail for the device are  
downloaded automatically. A download  
permission operation for your device  
may be required depending on the  
device.  
The Bluetooth® system may not operate  
for 1 or 2 minutes after the ignition  
is switched to ACC or ON. However,  
this does not indicate a problem. If the  
Bluetooth® system does not connect  
automatically after 1 or 2 minutes have  
elapsed, make sure that the Bluetooth®  
setting on the device is normal and attempt  
to reconnect the Bluetooth® device from  
the vehicle side.  
NOTE  
When Call history and messages are  
downloaded automatically, each automatic  
download setting must be on.  
Refer to Communication Settings on page  
5-114.  
Pairing Procedure  
1. Select the icon on the home screen  
and display the Settings screen.  
2. Select the  
3. Select  
tab.  
.
4. Turn the Bluetooth® setting on.  
5
–94  
Interior Features  
Bluetooth®  
After a device is registered, the system  
automatically identifies the device. By  
activating Bluetooth® Hands-Free again, or  
by activating Bluetooth® Hands-Free first  
after switching the ignition from OFF to  
ACC, the device connection condition is  
indicated in the center display.  
6.  
selection  
Connects both devices as hands-free  
and Bluetooth® audio.  
selection  
Connects as a hands-free device.  
selection  
Connects as Bluetooth® audio.  
IMPORTANT note about pairing and  
automatic reconnection:  
NOTE  
The following functions can be used for  
the Hands-free or audio.  
ꢀyꢀ  
If pairing is redone on the same  
mobile phone device, first clear  
“Mazda” displayed on the Bluetooth®  
setting screen of the mobile device.  
ꢀyꢀ  
When the OS of the device is updated,  
the pairing information may be deleted.  
If this happens, reprogram the pairing  
information to the Bluetooth® unit.  
ꢀyꢀHands-free: Phone calls and E-mail/  
SMS  
ꢀyꢀAudio: Bluetooth® audio, Pandora®,  
Aha™, Stitcher™ radio  
Disconnecting a device  
ꢀyꢀ  
Before you pair your device, make sure  
that Bluetooth® is “ON”, both on your  
phone and on the vehicle.  
1. Select the icon on the home screen  
and display the Settings screen.  
2. Select the  
3. Select  
tab.  
.
Device selection  
4. Turn the Bluetooth® setting on.  
5. Select the device name which is  
currently connected.  
If several devices have been paired, the  
Bluetooth® unit links the device last  
paired. If you would like to link a different  
paired device, it is necessary to change the  
link. The order of device priority after the  
link has been changed is maintained even  
when the ignition is switched off.  
6. Select  
.
Deleting a device  
Selecting and deleting devices  
1. Select the icon on the home screen  
and display the Settings screen.  
Connecting other devices  
2. Select the  
3. Select  
tab.  
1. Select the icon on the home screen  
and display the Settings screen.  
.
4. Turn the Bluetooth® setting on.  
5. Select the device name which you  
would like to delete.  
2. Select the  
3. Select  
tab.  
.
4. Turn the Bluetooth® setting on.  
5. Select the name of the device you  
would like to connect.  
6. Select  
7. Select  
.
.
5
–95  
Interior Features  
Bluetooth®  
Deleting all devices  
Ending Voice Recognition  
1. Select the icon on the home screen  
and display the Settings screen.  
Use one of the following methods:  
ꢀyꢀ  
Press the hang-up button.  
ꢀyꢀ  
Say, “Cancel”.  
2. Select the  
3. Select  
4. Select  
5. Select  
6. Select  
tab.  
.
ꢀyꢀ  
Operate the commander switch or the  
center display (only when vehicle is  
stopped).  
.
.
.
Skipping Voice Guidance (for faster  
operation)  
Changing PIN code  
PIN code (4 digits) can be changed.  
Press and release the talk button.  
1. Select the icon on the home screen  
and display the Settings screen.  
Troubleshooting for Voice Recognition  
If you do not understand an operation  
method while in the voice recognition  
mode, say “Tutorial” or “Help”.  
2. Select the  
3. Select  
4. Select  
5. Select  
tab.  
.
.
.
Commands useable anytime during  
voice recognition  
6. Input the new PIN code to be set.  
7. Select  
.
“Go Back” and “Cancel” are commands  
which can be used at anytime during voice  
recognition.  
Available Language (Type B)  
The Bluetooth® Hands-Free System  
applies to the following languages:  
Returning to previous operation  
To return to the previous operation, say,  
“Go Back” while in voice recognition  
mode.  
ꢀyꢀ  
English  
ꢀyꢀ  
Spanish  
ꢀyꢀ  
French  
Cancel  
Refer to Settings on page 5-55.  
To put the Bluetooth® Hands-Free system  
in standby mode, say, “Cancel” while in  
voice recognition mode.  
Voice Recognition (Type B)  
In this section, the basic operation of the  
voice recognition is explained.  
Activating Voice Recognition  
Press the talk button.  
5
–96  
Interior Features  
Bluetooth®  
To prevent a deterioration in the voice  
recognition rate and voice quality, the  
following points should be observed:  
ꢀyꢀ  
The voice recognition cannot be  
performed while voice guidance or  
the beep sound is operating. Wait  
until the voice guidance or the beep  
sound is finished before saying your  
commands.  
ꢀyꢀ  
Phone related commands are available  
only when your phone is connected via  
Bluetooth®. Make sure your phone is  
connected via Bluetooth® before you  
operate phone related voice commands.  
ꢀyꢀ  
Music play commands, such as Play  
Artist and Play Album can be used only  
in USB audio mode.  
ꢀyꢀ  
Do not speak too slowly or loudly (no  
loud voice).  
ꢀyꢀ  
Speak clearly, without pausing between  
words or numbers.  
ꢀyꢀ  
Dialects or different wording other  
than hands-free prompts cannot be  
recognized by voice recognition. Speak  
in the wording specified by the voice  
commands.  
ꢀyꢀ  
It is not necessary to face the  
microphone or approach it. Speak the  
voice commands while maintaining a  
safe driving position.  
ꢀyꢀ  
Close the windows and/or the moonroof  
to reduce loud noises from outside  
the vehicle, or turn down the airflow  
of the air-conditioning system while  
Bluetooth® Hands-Free is being used.  
ꢀyꢀ  
Make sure the vents are not directing air  
up towards the microphone.  
NOTE  
If the voice recognition performance is not  
satisfactory.  
Refer to Troubleshooting on page 5-131.  
5
–97  
Interior Features  
Bluetooth®  
Audio Operation Using Voice Recognition (Type B)  
Main audio operation  
The below commands are examples of the available commands.  
When the talk button is pressed and the following command is spoken out, the audio can be  
operated. The commands in the () can be omitted. The specified name and number are put  
into the {}.  
Corresponding audio  
source  
Voice command  
Function  
(Go to/Play) AM (Radio)  
(Go to/Play) FM (Radio)  
Switches the audio source to AM radio.  
Switches the audio source to FM radio.  
All  
All  
(Go to/Play) Bluetooth (Audio) Switches the audio source to BT audio.  
All  
(Go to/Play) Pandora  
Switches the audio source to Pandora®  
Switches the audio source to Aha™ Radio.  
Switches the audio source to Stitcher™ Radio.  
Switches the audio source to USB 1.  
Switches the audio source to USB 2.  
Plays the selected playlist.  
All  
(Go to/Play) Aha (Radio)  
(Go to/Play) Stitcher  
All  
All  
(Go to/Play) USB 1  
All  
(Go to/Play) USB 2  
All  
Play Playlist {Playlist name}  
Play Artist {Artist name}  
Play Album {Album name}  
Play Genre {Genre name}  
Play Folder {Folder name}  
USB  
USB  
USB  
USB  
USB  
Plays the selected artist.  
Plays the selected album.  
Plays the selected genre.  
Plays the selected folder.  
NOTE  
ꢀyꢀSome commands cannot be used depending on devices and use conditions.  
ꢀyꢀIf the Bluetooth® device, USB, or AUX is not connected, the related commands cannot be  
used.  
5
–98  
Interior Features  
Bluetooth®  
Bluetooth® Hands-Free  
(Type A)*  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
Making a Call  
4. Say: [Beep] “New entry”  
5. Prompt: “Name please.”  
6. Say: [Beep] “XXXXX... (Ex. “Mary's  
phone”)” (Say a voice tag for the name  
registered.)  
7. Prompt: “Adding XXXXX... (Ex.  
“Mary's phone”) (Registered voice tag).  
Is this correct?”  
8. Say: [Beep] “Yes”  
9. Prompt: “Home, Work, Mobile, or  
Other?”  
10.Say: [Beep] “Mobile” (Say “Home”  
, “Work”, “Mobile”, or “Other”, for  
the desired location to be registered.)  
11.Prompt: “Mobile (Location to be  
registered). Is this correct?”  
Phonebook Usage  
Telephone calls can be made by saying  
the name of a person (voice tag) whose  
phone number has been registered in  
Bluetooth® Hands-Free in advance. Refer  
to Phonebook registration.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Call”  
3. Prompt: “Name please.”  
4. Say: [Beep] “XXXXX... (Ex. “John's  
phone”)” (Say a voice tag registered in  
the phonebook.)  
5. Prompt: “Calling XXXXX... (Ex.  
“John's phone”) XXXX (Ex. “at  
home”). Is this correct?” (Voice tag and  
phone number location registered in  
phonebook).  
12.Say: [Beep] “Yes”  
13.Prompt: “Number, please.”  
14.Say: [Beep] “XXXXXXXXXXX”  
(Say the phone number to be  
registered.)  
6. Say: [Beep] “Yes”  
7. Prompt: “Dialing”  
15.Prompt: “XXXXXXXXXXX (Phone  
number registration). After the beep,  
continue to add numbers, or say  
Go-Back to re-enter the last entered  
numbers, or press the Pick-Up button to  
save the number.”  
NOTE  
The “Call” command and the voice tag  
can be combined.  
Ex. In Step 2, say, “Call John's phone”,  
then, Steps 3 and 4 can be skipped.  
Phonebook registration  
Phone numbers can be registered to the  
Bluetooth® Hands-Free phonebook.  
NOTE  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to be  
effective.  
*Some models.  
5
–99  
Interior Features  
Bluetooth®  
16.(Registration)  
Press the pick-up button or say “Enter”,  
then go to Step 17.  
6. Device (Mobile phone) operation:  
Select one entry from the phonebook  
and send it using Bluetooth®.  
7. Prompt: “X (Number of locations  
which include data) numbers have been  
imported. What name would you like to  
use for these numbers?”  
8. Say: [Beep] “XXXXX... (Ex. “Mary's  
phone”)” (Say a voice tag for the name  
registered.)  
(Adding/inputting telephone  
number)  
Say, “XXXX” (desired telephone  
number), then go to Step 15.  
(Telephone number correction)  
Say, “Go Back”. The prompt replies,  
“Go Back. The last entered numbers  
have been removed.”. Then go back to  
Step 13.  
9. Prompt: “Adding XXXXX... (Ex.  
“Mary's phone”) (Voice tag). Is this  
correct?”  
17.Prompt: “Number saved. Would you  
like to add another number for this  
entry?”  
18.Say: [Beep] “Yes” or “No”.  
19.If “Yes”, an additional phone number  
registration can be made for the same  
entry.  
10.Say: [Beep] “Yes”  
11.Prompt: “Number saved. Would you  
like to import another contact?”  
12.Say: [Beep] “Yes” or “No”  
13.If “Yes”, the procedure proceeds to  
Step 5.  
If “No”, the system returns to standby  
status.  
If “No”, the procedure proceeds to Step  
14.  
(Import contact)  
Editing phonebook  
The data registered to the Bluetooth®  
Hands-Free phonebook can be edited.  
Phonebook data from your device (Mobile  
phone) can be sent and registered to your  
Bluetooth® Hands-Free phonebook using  
Bluetooth®.  
NOTE  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to be  
effective.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
4. Say: [Beep] “Edit”  
5. Prompt: “Please say the name of the  
entry you would like to edit or say,  
“List names”.”  
4. Say: [Beep] “Import contact”  
5. Prompt: “The hands free System  
is ready to receive a contact from a  
phone. Only a home, a work, and a  
mobile number can be imported, This  
process requires operation of a mobile  
phone. refer to the phone's manual for  
more information”  
5
–100  
Interior Features  
Bluetooth®  
6. Say: [Beep] “XXXXX... (Ex. “Mary's  
phone”)” (Say the voice tag for the  
registered name to be edited in the  
phonebook.)  
7. Prompt: “Home, Work, Mobile, or  
Other?”  
8. Say: [Beep] “Home” (Say the  
registered location to be edited:  
“Home”, “Work”, “Mobile”, or  
“Other”.)  
9. Prompt: “XXXXX... (Ex. “Mary's  
phone”) (Registered voice tag) XXXX  
(Ex. “Home”) (Registered location). Is  
this correct?”  
14.(Number Change)  
Press the pick-up button, then go to  
Step 15.  
(Adding/inputting telephone  
number)  
Say, “XXXX” (desired telephone  
number), then go to Step 13.  
(Telephone number correction)  
Say, “Go Back”. The prompt replies,  
“Go Back. The last entered numbers  
have been removed. Number, please.”.  
Then go back to Step 12.  
15.Prompt: “Number changed.”  
10.Say: [Beep] “Yes”  
Phonebook data deletion  
11.Prompt: “The current number is  
XXXXXXXXXXX (Ex. “555-1234”)  
(Currently registered number). New  
number, please.”  
(Erasing individual phonebook data)  
Individual data registered to the  
Bluetooth® Hands-Free phonebook can be  
cleared.  
NOTE  
If there was no previous phone number  
registered to a location (Ex. “Work”),  
the prompt will only read out “Number,  
please”  
NOTE  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to be  
effective.  
12.Say: [Beep] “XXXXXXXXXXX (Ex.  
“555-5678”)” (Say the new phone  
number to be registered.)  
13.Prompt: “XXXXXXXX (Telephone  
number) After the beep, continue to add  
numbers, or say Go-Back to re-enter  
the last entered numbers, or press the  
Pick-Up button to save the number.”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
4. Say: [Beep] “Delete”  
5. Prompt: “Please say the name of the  
entry you would like to delete or say,  
“List names”. ”  
6. Say: [Beep] “XXXXX... (Ex. “John's  
phone”) ” (Say the registered voice tag  
to be deleted from the phonebook.)  
7. Prompt: “Deleting XXXXX... (Ex.  
“John's phone”) (Registered voice tag)  
Home (Registered location). Is this  
correct?”  
8. Say: [Beep] “Yes”  
5
–101  
Interior Features  
Bluetooth®  
9. Prompt: “XXXXX... (Ex. “John's  
phone”) (Registered voice tag) Home  
(Registered location) deleted.”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
4. Say: [Beep] “List names”  
5. Prompt: “XXXXX..., XXXXX...,  
XXXXX... (Ex. “John's phone”,  
Mary's phone, Bill's phone)” (Voice  
guidance reads out the voice tags  
registered to the phonebook.)  
(Complete deletion of the phonebook  
data)  
All data registered to the Bluetooth®  
Hands-Free phonebook can be erased.  
Press the talk button with a short press  
during the read-out at the desired name,  
and then say one of the following voice  
commands to execute it.  
NOTE  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to be  
effective.  
ꢀ
ꢀ
y “Continue”: Continues the list readout.  
ꢀ
ꢀ
y “Call”: Calls the registered phonebook  
data when the talk button is short-  
pressed.  
y “Edit”: Edits the registered phonebook  
data when the talk button is short-  
pressed.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
4. Say: [Beep] “Erase all”  
5. Prompt: “Are you sure you want to  
erase everything from your Hands Free  
system phonebook?”  
ꢀ
ꢀ
ꢀ
ꢀ
y “Delete”: Deletes the registered  
phonebook data when the talk button is  
short-pressed.  
ꢀ
ꢀ
y “Previous”: Returns to the previous  
phonebook data in read-out when the  
talk button is short-pressed.  
6. Say: [Beep] “Yes”  
7. Prompt: “You are about to delete  
everything from your Hands Free  
system phonebook. Do you want to  
continue?”  
6. Prompt: “End of list, would you like to  
start from the beginning?”  
7. Say: [Beep] “No”  
8. Say: [Beep] “Yes”  
8. The procedure returns to Step 3.  
9. Prompt: “Please wait, erasing the  
Hands Free system phonebook.”  
10.Prompt: “Hands-Free system  
phonebook erased.”  
Redial Function  
Redialing the number of the person  
previously dialed using the phone is  
possible.  
Read-out of names registered to the  
Bluetooth® Hands-Free phonebook  
Bluetooth® Hands-Free can read out the  
list of names registered to its phonebook.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Redial”  
3. Prompt: “Dialing”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Phonebook”  
5
–102  
Interior Features  
Bluetooth®  
Telephone Number Input  
Emergency calls  
A call can be made to the emergency  
phone number (911: U.S.A./Canada, 066:  
Mexico) using the voice input command.  
It may not function properly in some areas  
in Mexico.  
NOTE  
Practice this while parked until you are  
confident you can do it while driving in a  
non-taxing road situation. If you are not  
completely comfortable, make all calls  
from a safe parking position, and only  
start driving when you can devote your full  
attention to driving.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Emergency”  
3. - U.S.A./Canada vehicles - Prompt:  
“Dialing “911”, is this correct?”  
- Mexico vehicles - Prompt: “Dialing  
“066”, is this correct?”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Dial”  
3. Prompt: “Number, please”  
4. Say: [Beep] “XXXXXXXXXXX  
(Telephone number)”  
4. Say: [Beep] “Yes”  
5. Prompt: “Dialing”  
5. Prompt: “XXXXXXXXXXX.  
(Telephone number) After the beep,  
continue to add numbers, or say  
Go-Back to re-enter the last entered  
numbers, or press the Pick-Up button to  
execute dialing.”  
Receiving an Incoming Call  
1. Prompt: “Incoming call, press the  
pick-up button to answer”  
2. To accept the call, press the pick-up  
button.  
6. (Dialing)  
To reject the call, press the hang-up  
button.  
Press the pick-up button or say “Dial”,  
then go to Step 7.  
(Adding/inputting telephone  
number)  
Hanging Up a Call  
Press the hang-up button during the call. A  
beep sound will confirm that call is ended.  
Say, “XXXX” (desired telephone  
number), then go to Step 5.  
(Telephone number correction)  
Say, “Go Back”. The prompt replies,  
“Go Back. The last entered numbers  
have been removed.”. Then go back to  
Step 3.  
Mute  
The microphone can be muted during a  
call.  
1. Press the talk button with a short press.  
2. Say: [Beep] “Mute”  
3. Prompt:“Microphone muted”  
7. Prompt: “Dialing”  
NOTE  
The “Dial” command and a telephone  
number can be combined.  
Ex. In Step 2, say, “Dial 123-4567” then,  
Steps 3 and 4 can be skipped.  
Canceling mute  
1. Press the talk button with a short press.  
2. Say: [Beep] “Mute off”  
3. Prompt:“Microphone unmuted”  
5
–103  
Interior Features  
Bluetooth®  
Switching calls  
Transferring a Call from Hands-  
Free to a Device (Mobile Phone)  
Switching back to the previous call can  
also be done.  
Communication between the hands-free  
unit and a device (Mobile phone) is  
canceled, and the line can be switched  
to a standard call using a device (Mobile  
phone).  
Method 1  
1. Press the pick-up button.  
2. Prompt: “Swapping calls.”  
1. Press the talk button with a short press.  
2. Say: [Beep] “Transfer call”  
3. Prompt:“Transferred call to phone”  
Method 2  
1. Press the talk button with a short press.  
2. Say: [Beep] “Swap calls”  
3. Prompt: “Swapping calls.”  
Transferring a Call from a Device  
(Mobile Phone) to Hands-Free  
Three-way call function  
Communication between devices (Mobile  
phone) can be switched to Bluetooth®  
Hands-Free.  
1. Press the talk button with a short press.  
2. Say: [Beep] “Join calls”  
3. Prompt: “Joining calls”  
1. Press the talk button with a short press.  
2. Say: [Beep] “Transfer call”  
3. Prompt:“Transferred call to Hands  
Free system”  
Making a call using a telephone number  
1. Press the talk button with a short press.  
2. Say: [Beep] “Dial”  
3. Prompt: “Number, please”  
4. Say: [Beep] “XXXXXXXXXXX  
(Telephone number)”  
5. Prompt: “XXXXXXXXXXX.  
(Telephone number) After the beep,  
continue to add numbers, or say  
Go-Back to re-enter the last entered  
numbers, or press the Pick-Up button to  
execute dialing.”  
Call interrupt  
A call can be interrupted to receive an  
incoming call from a third party.  
Switch to a new incoming call using the  
following methods.  
Method 1  
1. Press the pick-up button.  
2. Prompt: “Swapping calls.”  
6. (Dialing)  
Press the pick-up button or say “Dial”,  
then go to Step 7.  
(Adding/inputting telephone  
number)  
Say, “XXXX” (desired telephone  
number), then go to Step 5.  
(Telephone number correction)  
Say, “Go Back”. The prompt replies,  
“Go Back. The last entered numbers  
have been removed.”. Then go back to  
Step 3.  
Method 2  
1. Press the talk button with a short press.  
2. Say: [Beep] “Swap calls”  
3. Prompt: “Swapping calls.”  
NOTE  
ꢀyꢀTo refuse an incoming call, press the  
hang-up button.  
ꢀyꢀAfter receiving a new incoming call, the  
previous call is placed on hold.  
7. Prompt: “Dialing”  
5
–104  
Interior Features  
Bluetooth®  
Bluetooth® Hands-Free  
(Type B)*  
Making calls using the phonebook  
1. Press the talk button with a short press.  
2. Say: [Beep] “Call”  
3. Prompt: “Name please.”  
4. Say: [Beep] “XXXXX... (Ex. “John's  
phone”)” (Say a voice tag registered in  
the phonebook.)  
Making a Call  
Phonebook Usage  
5. Prompt: “Calling XXXXX... (Ex.  
“John's phone”) XXXX (Ex. “at  
home”). Is this correct?” (Voice tag and  
phone number location registered in  
phonebook).  
Telephone calls can be made by saying  
the contact name in the downloaded  
phonebook or the name of a person whose  
phone number has been registered in the  
Bluetooth® Hands-Free. Refer to Import  
contact (Download Phonebook).  
6. Say: [Beep] “Yes”  
7. Prompt: “Dialing”  
1. Press the talk button.  
2. Wait for the beep sound.  
3. Say: “Call XXXXX... (Ex. “John”)  
Mobile”.  
4. Follow the voice guidance to place the  
call.  
Redialing function  
1. Press the talk button with a short press.  
2. Say: [Beep] “Redial”  
3. Prompt: “Dialing”  
Ending the current call  
Screen operation  
Press the hang-up button during the call.  
1. Select the icon on the home screen  
and display the Communication screen.  
DTMF (Dual Tone Multi-  
Frequency Signal) Transmission  
2. Select  
list.  
to display the contact  
This function is used when transmitting  
DTMF via the user's voice. The receiver  
of a DTMF transmission is generally a  
home telephone answering machine or  
a company's automated guidance call  
center (When you send tone signals  
back according to the voice guidance  
recording).  
3. Select the contact you would like  
to call to display the details for the  
contact.  
4. Select the desired phone number to  
make the call.  
Import contact (Download Phonebook)  
Phonebook data from your device (Mobile  
phone) can be sent and registered to your  
Bluetooth® Hands-Free phonebook using  
Bluetooth®.  
1. Press the talk button with a short press.  
2. Say: [Beep] “XXXX... send” (Say  
DTMF code)  
3. Prompt:“Sending XXXX... (DTMF  
code)”  
*Some models.  
5
–105  
Interior Features  
Bluetooth®  
(Automatic downloading)  
Favorites Contacts  
The “Auto Download Contacts”  
setting must be on. When hands-free is  
connected to the device, the phonebook is  
downloaded automatically.  
Refer to Communication Settings on page  
5-114.  
A maximum of 50 contacts can be  
registered. It will take less time to make a  
call after registering the telephone number.  
In addition, you do not have to look for the  
person you want to call in the phonebook.  
Registering to your favorites  
(Manually downloading)  
1. Select the icon on the home screen  
and display the Communication screen.  
If the “Auto Download Contacts” setting  
is off, download the phonebook using the  
following procedure.  
2. Select  
list.  
to display the favorites  
3. Select  
4. Select  
.
1. Select the icon on the home screen  
and display the Communication screen.  
or  
.
2. Select  
list.  
to display the contact  
5. Select from the displayed list.  
3. Select  
4. Select  
.
NOTE  
or  
to switch to the  
When “Add New Contact” is selected,  
information such as the selected person’s  
name is also registered. In addition, when  
“Add New Contact Details” is selected,  
only the telephone number of the selected  
person is registered.  
device operation.  
5. If  
is selected, select  
.
6. Download will be started from the  
mobile phone.  
Making a call from your favorites  
NOTE  
ꢀyꢀIf the phonebook has been already  
registered to the hands-free unit, the  
current phonebook is overwritten during  
“Import All Contacts”.  
1. Select the icon on the home screen  
and display the Communication screen.  
2. Select  
list.  
to display the favorites  
ꢀyꢀA maximum of 1000 contacts can be  
registered to the phonebook.  
3. (Only one phone number is  
registered to contact)  
ꢀyꢀPhonebook, incoming/outgoing call  
record, and favorite memories are  
exclusive to each mobile phone to  
protect privacy.  
Select the contact information you  
would like to call. Go to Step 5.  
(Multiple phone numbers are  
registered to contact)  
Select the contact you would like to  
call to display the screen indicating the  
details for the contact. Go to Step 4.  
5
–106  
Interior Features  
Bluetooth®  
NOTE  
4. Select the phone number you would  
like to call.  
If the contact is long-pressed when the  
favorites list is displayed, the contact  
information can be edited (deleted,  
moved).  
5. Select  
.
Deleting from your favorites  
1. Select the icon on the home screen  
and display the Communication screen.  
Telephone Number Input  
2. Select  
list.  
3. Select  
4. Select  
to display the favorites  
NOTE  
Practice this while parked until you are  
confident you can do it while driving in a  
non-taxing road situation. If you are not  
completely comfortable, make all calls  
from a safe parking position, and only  
start driving when you can devote your full  
attention to driving.  
.
.
5. Select the contact information which  
you would like to delete.  
6. Select  
.
Changing the display order of your  
favorites list  
1. Select the icon on the home screen  
and display the Communication screen.  
2. When  
is displayed.  
3. Input the telephone number using the  
dial pad.  
4. Select to make the call.  
1. Select the icon on the home screen  
and display the Communication screen.  
2. Select  
list.  
3. Select  
4. Select  
is pressed, the dial pad  
to display the favorites  
.
.
5. The contact can be moved after it is  
selected.  
Numeral or symbol entry  
6. Move the contact and select  
.
Use the dial pad.  
Long-press the  
to input +.  
to delete the currently input  
Select  
value.  
Long-press  
Changing contact name of your  
favorites  
to delete all input values.  
1. Select the icon on the home screen  
and display the Communication screen.  
Redial Function  
2. Select  
list.  
3. Select  
4. Select  
to display the favorites  
Makes a call to the last person called  
(latest person on outgoing call record)  
from the mobile phone/vehicle.  
.
.
1. Press the talk button.  
2. Wait for the beep sound.  
3. Say: “Redial”  
5. Select the contact to display the  
keyboard screen.  
6. If a new name is input and  
selected, the contact name is stored.  
is  
5
–107  
Interior Features  
Bluetooth®  
Call back Function  
1. If the vehicle is involved in a moderate  
to severe collision, notification of the  
call to 911 is made via audio and screen  
display. To cancel the call, press  
or hang-up  
Makes a call to the last person who called  
your (latest person on incoming call  
record) mobile phone/vehicle.  
1. Press the talk button.  
2. Wait for the beep sound.  
3. Say: “Call back”  
button within 10 seconds.  
2. If  
up button is not pressed within 10  
or hang-  
seconds, the call is made to 911  
automatically.  
Mobile 911 (U.S.A./Canada only)  
If the vehicle is involved in a moderate  
to severe collision, a call is made  
automatically to 911 from the connected  
device. The “Emergency Assistance Call”  
setting must be on.  
Refer to Communication Settings on page  
5-114.  
CAUTION  
Though the system can be set to  
not call 911, doing so will defeat  
the purpose of the system. Mazda  
recommends that the Mobile 911  
system remain activated.  
NOTE  
ꢀyꢀMobile 911 is a secondary function  
of the audio entertainment system.  
Therefore, the mobile 911 function  
does not assure that the call is always  
made to 911 after an accident occurs.  
ꢀyꢀA Hands-free device must be paired and  
connected. The 911 operator can verify  
the vehicle's position information using  
the Hands-free device GPS if equipped.  
ꢀ The 911 operator can verify the  
vehicle’s position information.  
5
–108  
Interior Features  
Bluetooth®  
Receiving an Incoming Call  
When an incoming call is received, the incoming call notification screen is displayed. The  
“Incoming Call Notifications” setting must be on.  
Refer to Communication Settings on page 5-114.  
To accept the call, press the pick-up button on the audio control switch or select  
the screen.  
on  
To reject the call, press the hang-up button on the audio control switch or select  
screen.  
on the  
The following icons are displayed on the screen during a call. Icons which can be used differ  
depending on use conditions.  
Icon  
Function  
Displays the Communication menu.  
Ends the call.  
Transferring a call from hands-free to a mobile phone  
Communication between the hands-free unit and a device (Mobile phone) is canceled, and  
the line can be switched to the device (Mobile phone) as a standard call.  
Transferring a call from a device (mobile phone) to hands-free  
Communication between devices (mobile phone) can be switched to Bluetooth® Hands-  
Free.  
Mute  
The microphone can be muted during a call.  
When selected again, the mute is canceled.  
A call is made to other person during a call and a 3-way call can be made. Select the contact  
from the following to make a call.  
: Call History is displayed.  
: The phonebook is displayed.  
: The dial pad is displayed. Input the phone number.  
The device may be unusable depending on the contractual content.  
The call on hold is made to make a 3-way call.  
The device may be unusable depending on the contractual content.  
Switches the call on hold.  
DTMF (Dual Tone Multi-Frequency Signal) Transmission  
This function is used when transmitting DTMF via the dial pad. The receiver of a DTMF  
transmission is generally a home telephone answering machine or a company's automated  
guidance call center.  
Input the number using a dial pad.  
5
–109  
Interior Features  
Bluetooth®  
NOTE  
ꢀyꢀIf the ignition is switched off during a  
hands-free call, the line is transferred  
to the device (Mobile phone)  
automatically.  
ꢀyꢀIf the DTMF code has two or more  
digits or symbols, each one must be  
transmitted individually.  
Call Interrupt  
A call can be interrupted to receive an  
incoming call from a third party.  
When  
is selected or the pick-  
up button on the steering wheel is pressed,  
the current call is held and the system  
switches to the new incoming call.  
When  
is selected, the current  
call is ended and the system switches to  
the new incoming call (GSM network  
only).  
When  
is selected or the hang-up  
button on the steering wheel is pressed, an  
incoming call is refused.  
NOTE  
ꢀyꢀThe function may not be available  
depending on the contractual content of  
the mobile device.  
ꢀyꢀThe function may not be operable  
depending on the type of the telephone  
network and the mobile device.  
5
–110  
Interior Features  
Bluetooth®  
Receiving and Replying to Messages (available only with Email/SMS  
compatible phones)  
NOTE  
SMS (Short Message Service) messages,  
and E-mail received by connected devices  
can be downloaded, displayed, and played  
(read by the system).  
Additionally, replies can also be made  
to calls and messages in the received  
messages.  
ꢀyꢀAttached data is not downloaded.  
ꢀyꢀMessages up to 1 kilobyte (e-mail)/140-  
bytes (SMS) can be downloaded.  
ꢀyꢀA message list is created for each  
device.  
ꢀyꢀIf the connected device does not  
correspond to MAP 1.0, the AT  
command is used to download. The  
downloaded message indicates that it is  
already read.  
Downloading messages  
Up to 20 new messages can be  
downloaded and displayed from a  
connected device.  
ꢀyꢀDownloading using the AT command  
may not function depending on the  
connected device.  
NOTE  
For e-mail, 20 messages for each account  
can be downloaded.  
Receiving messages  
(Automatic downloading)  
(Method 1)  
The “Auto Download Email” (E-mail)  
or “Auto Download Text Message”  
(SMS) setting must be on. A message  
is downloaded automatically when the  
Bluetooth® unit is connected to the device.  
Refer to Communication Settings on page  
5-114.  
When a device receives a message, a  
message received notification is displayed.  
The “Email Notifications” (E-mail) or  
“Text Notifications” (SMS) setting must  
be on.  
Refer to Communication Settings on page  
5-114.  
Select  
and display the message.  
(Manually downloading)  
(Method 2)  
When the “Auto Download Email”  
(E-mail) or “Auto Download Text  
Message” (SMS) setting is off, the  
message is downloaded using the  
following procedure.  
1. Select the icon on the home screen  
and display the Communication screen.  
2. Select  
message list for e-mail and SMS.  
3. Select the message you would like to  
display.  
and display the new  
1. Select the icon on the home screen  
and display the Communication screen.  
2. Select  
the Inbox.  
3. Select  
or  
to display  
.
4. Download will be started from the  
mobile phone.  
5
–111  
Interior Features  
Bluetooth®  
The following icons are displayed in the lower part of the details on the message. Icons  
which can be used differ depending on use conditions.  
Icon  
Function  
Displays the Communication menu.  
Displays the inbox.  
Plays back a message.  
When selected again, playback is temporarily stopped.  
Displays the previous message.  
Displays the next message.  
Only replies to the sender of the currently displayed message.  
Select the sentence on the displayed reply screen and select the sentence for sending from  
the preset message.  
Select  
.
(Only E-mail)  
Replies to all members including CC.  
Select the sentence on the displayed reply screen and select the sentence for sending from  
the preset message.  
Select  
.
Makes a call to a person who sent a message.  
For E-mail, this function may not work depending on the device.  
Deletes a message.  
The messages stored in a device is also deleted.  
NOTE  
Up to three preset messages can be selected.  
5
–112  
Interior Features  
Bluetooth®  
NOTE  
Example of use (verify unread E-mail)  
ꢀyꢀSelect the icon to change the  
language.  
1. Select the icon on the home screen  
and display the Communication screen.  
ꢀyꢀSelect the icon to switch between  
capitalized and lower-case characters.  
ꢀyꢀSelect the icon to return to the  
previous screen without storing the edit.  
2. Select  
to display the inbox.  
3. Select the unread message displayed in  
bold.  
4. The details of the message are  
displayed and replying to the message,  
making a call, or playback can be  
performed.  
Changing account for displaying  
(E-mail only)  
1. Select  
.
2. Select the account which you would  
like to display. Only the messages for  
the selected account are displayed in  
the inbox.  
Editing preset messages  
1. Select the icon on the home screen  
and display the Communication screen.  
2. Select  
3. Select  
.
.
4. Select the preset message which you  
would like to edit. The keyboard screen  
is displayed.  
5. When the message is input and is  
selected, the message is stored as a  
preset message.  
5
–113  
Interior Features  
Bluetooth®  
Communication Settings  
Select the icon on the home screen and display the Communication screen.  
Select  
to change the setting.  
Item  
Setting  
Function  
Go to Bluetooth® setting menu.  
Refer to Bluetooth® Preparation (Type B) on page 5-94.  
Bluetooth®  
—
Incoming Call  
Notifications  
On/Off  
Notifies when an incoming call is received.  
Auto Download Text  
Message  
Downloads SMS automatically when the Bluetooth® unit is connected  
to the device.  
On/Off  
On/Off  
On/Off  
On/Off  
On/Off  
Text Notifications  
Notifies when a new SMS is received.  
Auto Download  
Email*1  
Downloads E-mail automatically when the Bluetooth® unit is connected  
to the device.  
Email Notifications  
Notifies when a new Email is received.  
Auto Download Call  
History  
Downloads Call History automatically when the Bluetooth® unit is  
connected to the device.  
Auto Download  
Contacts*1  
Downloads the phonebook automatically when the Bluetooth® unit is  
connected to the device.  
On/Off  
Ringtone  
Car/Phone/Off Changes the ringtone setting.  
Adjusts using  
Phone Volume  
Adjusts the conversation volume.  
the slider.  
Adjusts using  
the slider.  
VR and Ringtone  
Adjusts the voice guidance and ringtone volume.  
First Name,  
Last Name  
Displays the contact information in alphabetical order of the first name.  
Displays the contact information in alphabetical order of the last name.  
Contacts Display  
Order  
Last Name,  
First Name  
Edits the preset message.  
Refer to Receiving and Replying to Messages (available only with  
E-mail/SMS compatible phones) on page 5-111.  
Edit Preset Messages  
—
Emergency Assistance  
Call  
On/Off  
—
Mobile Utilizes the Mobile 911 function.  
Initializes all Communication Settings.  
Restore Factory  
settings  
*1 Depending on the device, it may be necessary to acquire download permission on the device side.  
5
–114  
Interior Features  
Bluetooth®  
Bluetooth® Audio (Type A)*  
Applicable Bluetooth® specification  
(Recommended)  
Ver. 2.0  
NOTE  
ꢀyꢀThe battery consumption of Bluetooth®  
audio devices increases while  
Bluetooth® is connected.  
ꢀyꢀIf a general mobile phone device is  
USB connected during music playback  
over the Bluetooth® connection, the  
Bluetooth® connection is disconnected.  
For this reason, you cannot have music  
playback over a Bluetooth® connection  
and music playback using a USB  
connection at the same time.  
Response profile  
ꢀyꢀ  
A2DP (Advanced Audio Distribution  
Profile) Ver. 1.0/1.2  
ꢀyꢀ  
AVRCP (Audio/Video Remote Control  
Profile) Ver. 1.0/1.3  
ꢀyꢀThe system may not operate normally  
depending on the Bluetooth® audio  
device.  
A2DP is a profile which transmits only  
audio to the Bluetooth® unit. If your  
Bluetooth® audio device corresponds  
only to A2DP, but not AVRCP, you  
cannot operate it using the control panel  
of the vehicle's audio system. In this  
case, only the operations on the mobile  
device are available the same as when a  
portable audio device for a non-compliant  
Bluetooth® device is connected to the  
AUX terminal.  
How to Use the Bluetooth® Audio  
System  
Switching to Bluetooth® audio mode  
To listen to music or voice audio recorded  
to a Bluetooth® audio device, switch to  
the Bluetooth® audio mode to operate  
the audio device using the audio system  
control panel. Any Bluetooth® audio  
device must be paired to the vehicle's  
Bluetooth® unit before it can be used.  
Refer to Bluetooth® Preparation (Type A)  
on page 5-80.  
AVRCP  
Function  
Playback  
A2DP  
Ver. 1.0 Ver. 1.3  
—
—
—
—
—
—
X
X
X
X
X
X
X
X
Pause  
File (Track) up/down  
Reverse  
X
1. Turn on the Bluetooth® audio device's  
power.  
—
—
—
Fast-forward  
Text display  
2. Switch the ignition to ACC or ON.  
Make sure that the “ ” symbol is  
displayed in the audio display. The  
symbol is not displayed if an un-paired  
Bluetooth® audio device is being used  
or the vehicle's Bluetooth® unit has a  
malfunction.  
X: Available  
—: Not available  
NOTE  
Some Bluetooth® audio devices need a  
certain amount of time before the “ ”  
symbol is displayed.  
*Some models.  
5
–115  
Interior Features  
Bluetooth®  
3. Press the media button (  
) to  
Fast-forward/Reverse (AVRCP Ver. 1.3)  
switch to the Bluetooth® audio mode  
and start playback.  
Fast-forward  
Press and hold the fast-forward button  
).  
If the current device version is lower  
than AVRCP Ver. 1.3: “BT Audio” is  
displayed.  
If the current device is AVRCP Ver. 1.3:  
The playback time is displayed.  
(
Reverse  
Press and hold the reverse down button  
(
).  
NOTE  
Switching the display (only AVRCP Ver.  
1.3)  
ꢀyꢀIf the Bluetooth® audio device does not  
begin playback, press the Play/Pause  
button (4).  
ꢀyꢀIf a call is received on a hands-free  
mobile phone during playback from the  
Bluetooth® audio device, the playback is  
stopped. Playback from the Bluetooth®  
audio device resumes after the call  
ends.  
For files with a song title and other  
information that have been input, the  
display switches between display of the  
song title and other information each  
time the text button (3) is pressed during  
playback.  
Playback  
1. To listen to a Bluetooth® audio device  
over the vehicle's speaker system,  
switch the mode to Bluetooth®  
audio mode. (Refer to “Switching to  
Bluetooth® audio mode”)  
Playback time  
Album title  
Song title  
2. To stop playback, press the Play/Pause  
button (4).  
Artist name  
3. Press the button again to resume  
playback.  
NOTE  
Selecting a file (track)  
ꢀyꢀIf title information is not available, “NO  
TITLE” is displayed.  
Selects the next file (track)  
ꢀyꢀThis unit cannot display some  
characters. Characters which cannot be  
displayed are indicated by an asterisk  
( ).  
Short-press the track up button (  
).  
Selects the beginning of the current file  
(track)  
Short-press the track down button (  
).  
5
–116  
Interior Features  
Bluetooth®  
Bluetooth® Audio (Type B)*  
Display scroll  
Only 13 characters can be displayed at one  
time. To display the rest of the characters  
of a long title, press and hold the text  
button (3). The display scrolls the next 13  
characters. Press and hold the text button  
(3) again after the last 13 characters have  
been displayed to return to the beginning  
of the title.  
Applicable Bluetooth® specification  
(Recommended)  
Ver. 1.1/1.2/2.0 EDR/2.1 EDR/3.0  
(conformity)  
Response profile  
ꢀyꢀ  
A2DP (Advanced Audio Distribution  
Profile) Ver. 1.0/1.2  
ꢀyꢀ  
AVRCP (Audio/Video Remote Control  
Profile) Ver. 1.0/1.3/1.4  
Bluetooth® Audio Device  
Information Display  
If a Bluetooth® audio device is connected,  
the following information is displayed in  
the audio display.  
AVRCP Ver. AVRCP  
lower than 1.3 Ver. 1.3  
Device name  
Title  
X
X
X
X
X
X
X
—
—
—
—
—
—
—
Artist name  
Album name  
File number  
Playback time  
Folder number  
X: Available  
—: Not available  
NOTE  
Some information may not display  
depending on the device, and if the  
information cannot be displayed, “NO  
TITLE” is indicated.  
*Some models.  
5
–117  
Interior Features  
Bluetooth®  
NOTE  
ꢀyꢀThe battery consumption of Bluetooth®  
audio devices increases while  
A2DP is a profile which transmits only  
audio to the Bluetooth® unit. If your  
Bluetooth® audio device corresponds  
only to A2DP, but not AVRCP, you  
cannot operate it using the control panel  
of the vehicle's audio system. In this  
case, only the operations on the mobile  
device are available the same as when a  
portable audio device for a non-compliant  
Bluetooth® device is connected to the  
AUX terminal.  
Bluetooth® is connected.  
ꢀyꢀIf a general mobile phone device is  
USB connected during music playback  
over the Bluetooth® connection, the  
Bluetooth® connection is disconnected.  
For this reason, you cannot have music  
playback over a Bluetooth® connection  
and music playback using a USB  
connection at the same time.  
ꢀyꢀThe system may not operate normally  
depending on the Bluetooth® audio  
device.  
AVRCP  
Function  
A2DP  
Ver. 1.0 Ver. 1.3 Ver. 1.4  
Playback  
Pause  
X
X
X
X
X
X
X
X
File (Track)  
up/down  
—
X
X
X
Reverse  
—
—
—
—
—
—
X
X
X
X
X
X
Fast-forward  
Text display  
Depends Depends  
Repeat  
Shuffle  
Scan  
—
—
—
—
—
—
—
—
on  
device  
on  
device  
Depends Depends  
on  
device  
on  
device  
Depends Depends  
on  
device  
on  
device  
Depends  
on  
device  
Folder up/  
down  
—
X: Available  
—: Not available  
5
–118  
Interior Features  
Bluetooth®  
How to Use the Bluetooth® Audio System  
Switching to Bluetooth® audio mode  
To listen to music or voice audio recorded to a Bluetooth® audio device, switch to the  
Bluetooth® audio mode to operate the audio device using the audio system control panel.  
Any Bluetooth® audio device must be paired to the vehicle's Bluetooth® unit before it can be  
used.  
Refer to Bluetooth® Preparation (Type B) on page 5-94.  
1. Turn on the Bluetooth® audio device's power.  
2. Switch the ignition to ACC or ON.  
3. Select the icon on the home screen and display the Entertainment screen.  
4. When Bluetooth® is selected, switches to the Bluetooth® audio mode to begin playback.  
NOTE  
ꢀyꢀIf Bluetooth® audio is used after using Pandora®, Aha™ or Stitcher™ radio, the  
application on the mobile device has to be closed first.  
ꢀyꢀIf the Bluetooth® audio device does not begin playback, select the  
icon.  
ꢀyꢀIf the mode is switched from Bluetooth® audio mode to another mode (radio mode), audio  
playback from the Bluetooth® audio device stops.  
Playback  
To listen to a Bluetooth® audio device over the vehicle's speaker system, switch the mode to  
Bluetooth® audio mode. (Refer to “Switching to Bluetooth® audio mode”)  
After switching to the Bluetooth® audio mode, the following icons are displayed in the  
lower part of the display. Icons which can be used differ depending on the version of the  
Bluetooth® audio device which you are currently using.  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
(AVRCP Ver. 1.4 only)  
Displays the top level folder/file list.  
Select the folder which you want to select.  
The files in the selected folder are displayed.  
Select the file you want to play.  
(AVRCP Ver. 1.3 or higher)  
Replays the song currently being played repeatedly.  
When selected again, the songs in the folder are played repeatedly.  
Select it again to cancel.  
Icons change when the song is repeated or the folder is repeated.  
(AVRCP Ver. 1.3 or higher)  
Plays songs in the folder in random order.  
When selected again, the songs on the device are played in random order.  
Select it again to cancel.  
Icons change during folder shuffle or device shuffle.  
5
–119  
Interior Features  
Bluetooth®  
Icon  
Function  
Scans the titles in a folder and plays the beginning of each song to aid in finding a desired  
song.  
When selected again, the beginning of each song on the device is played.  
When selected again, the operation is canceled and the song currently being played  
continues.  
Returns to the beginning of the previous song.  
Long-press to fast reverse. It stops when you remove your hand from the icon or the  
commander knob.  
Plays the Bluetooth® audio. When selected again, playback is temporarily stopped.  
Advances to the beginning of the next song.  
Long-press to fast forward. It stops when you remove your hand from the icon or the  
commander knob.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-42.  
5
–120  
Interior Features  
Bluetooth®  
Bluetooth® Audio Device  
Information Display  
Example of use (When searching for a  
song from the top level of a device)  
1. Select the icon and display the  
folder/file list at the top level.  
If a Bluetooth® audio device is connected,  
the following information is displayed in  
the center display.  
AVRCP  
Ver. lower  
than 1.3  
AVRCP  
Ver. 1.4 or  
higher  
AVRCP  
Ver. 1.3  
Device name  
X
X
X
X
Remaining  
battery  
charge of  
device  
X
X
Song name  
Artist name  
Album name  
—
—
—
X
X
X
X
X
X
2. When the folder is selected, folders/file  
lists in the folder are displayed.  
When the playlist is selected, the file  
list is displayed.  
Playback  
time  
—
—
—
X
X
X
X
3. Select the desired song.  
Genre name  
Album art  
image  
NOTE  
—
—
Select to move to a folder one level  
higher.  
X: Available  
—: Not available  
NOTE  
Some information may not display  
depending on the device, and if the  
information cannot be displayed,  
“Unknown - - -” is indicated.  
5
–121  
Interior Features  
Bluetooth®  
How to Use Pandora®*  
What is Pandora®?  
Pandora® is free personalized Internet radio. Simply enter a favorite artist, track, genre,  
and Pandora® will create a personalized station that plays their music and more like it.  
Rate songs by giving thumbs-up and thumbs-down feedback to further refine your station,  
discover new music and help Pandora® play only music you like.  
®
®
®
ꢀ*ꢀ  
Pandora , the Pandora logo, and the Pandora trade dress are trademarks or registered  
trademarks of Pandora Media, Inc., used with permission.  
NOTE  
To operate Pandora® from your Bluetooth® device, perform the following in advance:  
ꢀyꢀCreate Pandora® account on the Web.  
ꢀyꢀCreate Pandora® station using Pandora® application.  
ꢀyꢀInstall Pandora® application on your device.  
Playback  
Select the icon on the home screen and display the Entertainment screen. When  
selected, the following icons are indicated in the bottom part of the center display.  
is  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Displays the station list.  
Use to switch to other stations.  
Thumbs-Down  
Press the icon to tell Pandora® not to play this track.  
Thumbs-Up  
Press the icon to tell Pandora® “you like this track” and it helps to bring in more tracks  
like it to your station.  
Bookmarking  
Bookmarks the song or artist currently being played.  
Plays the track. When selected again, playback is temporarily stopped.  
Goes to the next song.  
*Some models.  
5
–122  
Interior Features  
Bluetooth®  
Icon  
Function  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-42.  
NOTE  
Bookmarking  
ꢀyꢀThe skip function may not be available  
depending on the device.  
ꢀyꢀThe number of skips is limited by  
Pandora®.  
ꢀyꢀIf the icon is selected when the skip  
song function is running, the next song  
is skipped.  
You can bookmark song or artist to check  
out later on the Web.  
1. Select the icon.  
2. Select  
song.  
to bookmark the  
to bookmark the  
3. Select  
artist.  
Selection from station list  
Selection can be made from a programmed  
radio station list.  
1. Select the icon.  
2. Select the desired radio station.  
NOTE  
When  
is selected, songs randomly  
selected from the radio station list are  
played.  
Selecting the sort method  
The displayed order of the station list can  
be changed.  
1. Select the  
2. Select  
3. Select  
icon.  
.
to display in the order  
starting from the newly created station.  
4. Select to display in alphabetical  
order.  
NOTE  
The displayed order of  
changed.  
cannot be  
5
–123  
Interior Features  
Bluetooth®  
How to Use Aha™*  
Aha is an application which can be used to enjoy various Internet content such as Internet  
radio and podcasts.  
Stay connected to your friends activities by getting updates from Facebook and Twitter.  
Using the location-based service, nearby services and destinations can be searched or real-  
time local information can be obtained.  
For details on Aha, refer to “http://www.aharadio.com/”.  
ꢀ*ꢀ  
Aha, the Aha logo, and the Aha trade dress are trademarks or registered trademarks of  
Harman International Industries, Inc., used with permission.  
NOTE  
ꢀyꢀThe service content provided by Aha varies depending on the country in which the user  
resides. In addition, the service is not available in some countries.  
ꢀyꢀTo operate Aha from your Bluetooth® device, perform the following in advance:  
ꢀyꢀInstall the Aha application to your device.  
ꢀyꢀCreate an Aha account for your device.  
ꢀyꢀLog onto Aha using your device.  
ꢀyꢀSelect the preset station on your device.  
Playback  
Select the icon on the home screen and display the Entertainment screen. When  
is  
selected, the following icons are displayed at the bottom of the center display. The displayed  
icon differs depending on the selected station.  
In addition, icons other than the following icons may be displayed.  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Displays the main menu.  
Use to switch to other stations.  
Displays the content list.  
Use to switch to other desired content on the station.  
Shout  
Records voice.  
Records voice and posts it as playable audio to Facebook and other social stations.  
Like*1  
Evaluates the current content as “Like”.  
5
–124  
Interior Features  
Bluetooth®  
Icon  
Function  
Dislike*1  
Evaluates the current content as “Dislike”.  
Reverses for 15 seconds.  
Map (vehicles with navigation system)  
Displays the destination searched by the location based services on the navigation system.  
Call  
A call can be made to the telephone number of a shop searched using the Location Based  
Services. Available when a device is connected as a Hands-Free.  
Returns to the previous content.  
Pauses playback of the content. When selected again, playback resumes.  
Goes to the next content.  
Fast-forwards for 30 seconds.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-42.  
*1 Some stations may use alternate variations of Like and Dislike, based on station type or provider.  
Main menu  
Select the  
icon.  
5
–125  
Interior Features  
Bluetooth®  
Switch the tab and select the station category.  
Tab  
Function  
Displays the preset station list set on the device.  
Select the preset station name to play the station content.  
Presets  
Nearby  
Select the desired station.  
Guidance is provided to the searched destination near the vehicle's position.  
You can designate desired categories previously set using the filter setting  
on your device.  
NOTE  
The available Location Based Services may differ because the services depend on the  
content provided by Aha™.  
5
–126  
Interior Features  
Bluetooth®  
Example of use (Location Based  
Services)  
Shout  
Some social stations, such as Facebook or  
Caraoke, support the ability to record and  
share voice messages using the “Shout”  
function.  
1. Select the desired station from the  
Nearby tab on the main menu.  
The destination name or address  
playback starts in the order of the  
destination name list.  
1. Select the icon and start the  
countdown (3, 2, 1, 0). Recording starts  
when the countdown reaches zero.  
2. Records voice.  
3. Select  
recording.  
and store/post the  
NOTE  
ꢀyꢀRecordable time varies depending on  
the station (Max. 30 seconds).  
ꢀyꢀRecording stops automatically when the  
recordable time has elapsed. You can  
then post or delete the recording.  
2. When the icon is selected, the  
currently displayed destination is  
displayed on the navigation system  
(vehicles with navigation system).  
3. When the icon is selected, a phone  
call is placed to the currently displayed  
destination.  
4. Select the  
content list.  
icon and display the  
Selection of other destinations from the  
list can be made.  
5
–127  
Interior Features  
Bluetooth®  
How to Use Stitcher™* Radio  
What is Stitcher™ Radio?  
Stitcher™ Radio is an application for streaming Internet radio or podcasts on demand.  
Recommended content is automatically selected by registering content which you put into  
your favorites, or by pressing the Like or Dislike button.  
For details on Stitcher™ Radio, refer to “http://stitcher.com/”.  
ꢀ*ꢀ  
Stitcher™, the Stitcher™ logo, and the Stitcher™ trade dress are trademarks or registered  
trademarks of Stitcher, Inc., used with permission.  
NOTE  
To operate Stitcher™ Radio from your Bluetooth® device, perform the following in advance:  
ꢀyꢀInstall the Stitcher™ Radio application to your device.  
ꢀyꢀCreate a Stitcher™ Radio account for your device.  
ꢀyꢀLog onto Stitcher™ Radio using your device.  
Playback  
Select the Entertainment screen and display the icon on the home screen. When  
selected, the following icons are indicated in the bottom part of the center display.  
is  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Displays the station list.  
Use to switch to other stations.  
Dislike  
Evaluates the current program as “Dislike”.  
Like  
Evaluates the current program as “Like”.  
Adds the current station to your favorites or deletes the current station from your favorites.  
Reverses for 30 seconds.  
Plays the station. Select it again to pause playback.  
5
–128  
Interior Features  
Bluetooth®  
Icon  
Function  
Goes to the next station.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-42.  
Station list  
1. Select the  
icon and display the station list.  
Favorites station name: Select to display the program registered to your favorites.  
Category name: A recommended category selected from your favorites by Stitcher™  
is displayed.  
Select it to display the category program.  
2. Select the program name to play it.  
5
–129  
Interior Features  
Bluetooth®  
Add to your favorites  
If the current program has not been  
registered to your favorites, it can be  
registered to your favorites.  
1. Select the icon to display the  
favorites station which the registration  
can be added.  
2. Select the station name which you want  
to register.  
3. Select  
to add the program to the  
selected favorites station.  
NOTE  
ꢀyꢀMultiple favorites stations can be  
selected and registered.  
ꢀyꢀFavorites stations registered by  
oneself as well those set by default are  
displayed.  
Delete from your favorites  
If the current program has already been  
registered to your favorites, the program  
can be deleted from your favorites.  
1. Select the icon.  
2. The program is automatically deleted  
from the favorites station.  
5
–130  
Interior Features  
Bluetooth®  
Troubleshooting*  
Mazda Bluetooth® Hands-Free Customer Service  
If you have any problems with Bluetooth®, contact our toll-free customer service center.  
ꢀyꢀ  
U.S.A.  
ꢀPhone: 800-430-0153 (Toll-free)  
ꢀWeb: www.MazdaUSA.com/bluetooth  
ꢀyꢀ  
Canada  
ꢀPhone: 800-430-0153 (Toll-free)  
ꢀWeb: www.mazdahandsfree.ca  
ꢀyꢀ  
Mexico  
ꢀCenter of Attention to Client (CAC)  
ꢀPhone: 01-800-01-MAZDA (Toll-free)  
ꢀWeb: www.mazdamexico.com.mx  
Bluetooth® Device pairing, connection problems  
Symptom  
Cause  
Solution method  
First make sure the device is  
compatible with the Bluetooth®  
unit, and then check whether the  
Bluetooth® function and the Find  
Mode/Visible setting*1 on the device  
are turned on. If pairing is still  
not possible after this, contact an  
Authorized Mazda Dealer or Mazda  
Bluetooth® Hands-Free Customer  
Service.  
Unable to perform pairing  
—
Perform pairing using the following  
procedure.  
The pairing information paired to  
the Bluetooth® unit or device is not  
recognized correctly.  
Pairing cannot be performed again  
Unable to perform pairing  
y
Clear “Mazda” stored in the device.  
y
Perform pairing again.  
The Bluetooth® function and the  
Find Mode/Visible setting*1 on the  
device may turn off automatically  
after a period of time has elapsed  
depending on the device.  
Check whether the Bluetooth®  
function and the Find Mode/Visible  
setting*1 on the device are turned on  
and pairing or reconnect.  
Does not connect automatically  
when starting the engine  
Automatically connects, but then  
disconnects suddenly  
The device is in a location in which  
radio wave interference can occur  
easily, such as inside a bag in a rear which radio wave interference is less  
Move the device to a location in  
Disconnects intermittently  
seat, in a rear pocket of a pair of  
pants.  
likely to occur.  
Does not connect automatically  
when starting the engine  
The pairing information is updated  
when the device OS is updated.  
Perform pairing again.  
*1 Setting which detects the existence of a device external to the Bluetooth® unit  
*Some models.  
5
–131  
Interior Features  
Bluetooth®  
NOTE  
ꢀyꢀWhen you update the operating system of your mobile device the pairing information may  
be invalidated. Therefore, the device may need to be re-paired to the hands-free unit.  
ꢀyꢀIf you pair your phone which has already been paired to your vehicle more than once  
in the past, you need to delete “Mazda” on your mobile device. Then, execute the  
Bluetooth® search on your mobile device once again, and pair to a newly detected  
“Mazda”.  
ꢀyꢀBefore you pair your device, make sure that Bluetooth® is “ON”, both on your phone and  
on the vehicle.  
Voice recognition related problems  
Symptom  
Cause  
Solution method  
y
y
Poor voice recognition  
Excessive, slow speech.  
Excessive, forceful speech  
(shouting).  
Regarding the causes indicated  
on the left, be careful with how  
you speak. In addition, when  
y
y
y
y
Speaking before the beep sound  
has ended.  
Loud noise (speaking or noise from numbers are spoken in a sequence,  
False recognition of numbers  
outside/inside vehicle).  
Airflow from A/C is blowing  
against the microphone.  
Speaking in off-standard  
expressions (dialect).  
recognition ability will improve  
if no stop is placed between the  
numbers.  
A poor connection or malfunction  
with the microphone may have  
occurred. Consult an Authorized  
Mazda Dealer.  
There is a malfunction in the  
microphone.  
Poor voice recognition  
If there is any malfunction after  
checking the pairing situation, check  
for device pairing or connection  
problems.  
There is a problem with the  
connection between the Bluetooth®  
unit and the device.  
Phone-related voice recognition is  
disabled  
By carrying out the following  
measures, the rate of recognition  
will improve.  
y
Clear memory from the phonebook  
which is not used very often.  
The Bluetooth® system is under a  
condition in which recognition is  
difficult.  
Names in the phonebook are not  
easily recognized  
y
Avoid shortened names, use full  
names. (Recognition improves the  
longer the name is. By not using  
names such as “Mom”, “Dad”,  
recognition will improve.)  
When operating the audio, a song  
name is not recognized  
Song names cannot be recognized  
by voice.  
—
Guidance can be skipped by quickly  
pressing and releasing the Talk  
button.  
You want to skip guidance  
—
5
–132  
Interior Features  
Bluetooth®  
Regarding problems with calls  
Symptom  
Cause  
Solution method  
For about three seconds after  
starting a call, the Bluetooth®  
unit's Noise Suppression function  
requires time to adapt to the call  
environment.  
When starting a call, vehicle noise  
from the other party can be heard  
This does not indicate a problem  
with the device.  
The other party cannot be heard or  
the speaker's voice is quiet  
The volume is set at zero or low.  
Increase the volume.  
Other problems  
Symptom  
Cause  
Solution method  
The indication for the remaining  
battery is different between the  
vehicle and the device  
The indication method is different  
between the vehicle and the device.  
—
When a call is made from the  
vehicle, the telephone number is  
updated in the incoming/outgoing  
call record but the name does not  
appear  
If the number has been registered  
into the phonebook, the incoming/  
outgoing call record is updated by  
the name in the phonebook when the  
engine is restarted.  
The number has not been registered  
into the phonebook.  
The cell phone does not synchronize  
with the vehicle regarding the  
incoming/outgoing call record  
Some types of cell phones do not  
synchronize automatically.  
Operate the cell phone for  
synchronization.  
It takes a long time to complete the A maximum of 60 seconds is  
function for changing the language required.  
—
5
–133  
Interior Features  
Interior Equipment  
Vanity Mirrors  
Sunvisors  
When you need a sunvisor, lower it for use  
in front or swing it to the side.  
To use the vanity mirror, lower the  
sunvisor.  
If your vehicle is equipped with a vanity  
mirror light, it will illuminate when you  
open the cover.  
Sunvisor  
To prevent the battery from being  
discharged, the vanity mirror will only  
illuminate in the tilt range shown below.  
off  
off  
Side Extension Sunvisors*  
on  
The visor extender extends the sunvisor's  
range of sun shading.  
To use, pull it out.  
CAUTION  
When moving the sunvisor, retract the  
visor extender to its original position.  
Otherwise, the visor extender could hit  
the rearview mirror.  
*Some models.  
5
–134  
Interior Features  
Interior Equipment  
Without Map Lights  
Interior Lights  
Overhead Lights  
Switch  
Position  
Overhead Lights  
Light off  
y
Light is on when any door is open  
Light is on or off when the  
illuminated entry system is on  
y
Light on  
NOTE  
(With map lights)  
The map lights and rear overhead light  
also turn on and off when the front  
overhead light switch is operated.  
With Map Lights  
Front  
Map Lights*  
When the overhead light switch is in the  
door or off position, press the lens to  
illuminate the map lights, and then press  
the lens again to turn them off.  
Rear  
NOTE  
The map lights will not turn off even if the  
lens is pressed in the following cases:  
ꢀyꢀThe overhead light switch is in the ON  
position.  
ꢀyꢀThe overhead light switch is in the door  
position with the door open.  
ꢀyꢀThe illuminated entry system is on.  
*Some models.  
5
–135  
Interior Features  
Interior Equipment  
Luggage Compartment Lights (5–door)  
Illuminated Entry System  
When the illuminated entry system  
operates, the overhead light (switch is in  
the DOOR position) turn on for:  
ꢀyꢀ  
About 30 seconds after the driver's door  
is unlocked and the ignition is switched  
off.  
ꢀyꢀ  
About 15 seconds after all doors are  
closed and the ignition is switched off.  
ꢀyꢀ  
About 5 seconds after all doors are  
closed and the ignition is switched off  
when the key is out of the vehicle.  
ꢀyꢀ  
Illuminates for about 15 seconds when  
the ignition is returned from ACC to  
OFF.  
Switch  
Luggage Compartment Light  
Position  
Light off  
Light on when the liftgate is open  
The light also turns off when:  
ꢀyꢀ  
The ignition is switched on and all doors  
are closed.  
ꢀyꢀ  
The driver's door is locked.  
Trunk Light (4–door)  
The trunk light is on when the lid is open  
and off when it's closed.  
NOTE  
ꢀyꢀBattery saver  
ꢀ If any door is left open with the  
overhead light switch in the DOOR  
position, or the liftgate/trunk lid is left  
open, the overhead light or luggage  
compartment light/trunk light turns  
off after about 30 minutes to prevent  
battery depletion.  
ꢀyꢀThe operation of the illuminated entry  
system can be changed.  
ꢀ Refer to Personalization Features on  
page 9-12.  
NOTE  
To prevent the battery from being  
discharged, do not leave the trunk open  
for a long period when the engine is not  
running.  
5
–136  
Interior Features  
Interior Equipment  
Without CD Player  
Accessory Sockets  
Only use genuine Mazdaaccessories or the  
equivalent requiring no greater than 120 W  
(DC 12 V, 10 A).  
Type A  
The accessory sockets can be used  
regardless of whether the ignition is on or  
off.  
CAUTION  
ꢀ¾ꢀ  
To prevent accessory socket damage or  
electrical failure, pay attention to the  
following:  
ꢀ¾ꢀ  
Do not use accessories that require  
more than 120 W (DC 12 V, 10 A).  
ꢀ¾ꢀ  
Do not use accessories that are not  
genuine Mazda accessories or the  
equivalent.  
ꢀ¾ꢀ  
Close the cover when the accessory  
socket is not in use to prevent foreign  
objects and liquids from getting into  
the accessory socket.  
Type B*  
The ignition must be switched to ACC or  
ON.  
With CD Player  
ꢀ¾ꢀ  
Correctly insert the plug into the  
accessory socket.  
ꢀ¾ꢀ  
Do not insert the cigarette lighter into  
the accessory socket.  
*Some models.  
5
–137  
Interior Features  
Interior Equipment  
ꢀ¾ꢀ  
Noise may occur on the audio playback  
depending on the device connected to  
Cup Holder  
the accessory socket.  
ꢀ¾ꢀ  
Depending on the device connected  
WARNING  
to the accessory socket, the vehicle's  
electrical system may be aꢂected,  
which could cause the warning light to  
illuminate. Disconnect the connected  
device and make sure that the problem  
is resolved. If the problem is resolved,  
disconnect the device from the socket  
and switch the ignition oꢂ. If the  
problem is not resolved, consult an  
Authorized Mazda Dealer.  
Never use a cup holder to hold hot  
liquids while the vehicle is moving:  
Using a cup holder to hold hot  
liquids while the vehicle is moving is  
dangerous. If the contents spill, you  
could be scalded.  
Do not put anything other than cups or  
drink cans in cup holders:  
Putting objects other than cups  
or drink cans in a cup holder is  
dangerous.  
NOTE  
To prevent discharging of the battery, do  
not use the socket for long periods with the  
engine off or idling.  
During sudden braking or  
maneuvering, occupants could be  
hit and injured, or objects could be  
thrown around the vehicle, causing  
interference with the driver and the  
possibility of an accident. Only use a  
cup holder for cups or drink cans.  
Connecting the accessory socket  
1. Open the lid.  
2. Pass the connection plug cord through  
the cutout of the console and insert the  
plug into the accessory socket.  
Front  
Plug  
5
–138  
Interior Features  
Interior Equipment  
Rear*  
Bottle Holder  
Bottle holders are on the inside of the  
doors.  
The rear cup holder is on the rear center  
armrest.  
Bottle holder  
CAUTION  
Do not use the bottle holders for  
containers without caps. The contents  
may spill when the door is opened or  
closed.  
*Some models.  
5
–139  
Interior Features  
Interior Equipment  
Overhead Console*  
Storage Compartments  
This console box is designed to store  
eyeglasses or other accessories.  
Push and release to open.  
WARNING  
Keep storage boxes closed when  
driving:  
Driving with the storage boxes open is  
dangerous. To reduce the possibility of  
injury in an accident or a sudden stop,  
keep the storage boxes closed when  
driving.  
Do not put articles in storage spaces  
with no lid:  
Putting articles in storage spaces with  
no lid is dangerous as they could be  
thrown around the cabin if the vehicle  
is suddenly accelerated and cause  
injury depending on how the article is  
stored.  
Glove Compartment  
To open the glove compartment, pull the  
latch toward you.  
CAUTION  
Do not leave lighters or eyeglasses  
in the storage boxes while parked  
under the sun. A lighter could explode  
or the plastic material in eyeglasses  
could deform and crack from high  
temperature.  
To close the glove compartment,  
firmly press in the center of the glove  
compartment lid.  
*Some models.  
5
–140  
Interior Features  
Interior Equipment  
Center Console  
Rear Coat Hooks  
To open, pull the release latch.  
WARNING  
Never hang heavy or sharp objects on  
the assist grips and coat hooks:  
Hanging heavy or sharp-ended objects  
such as a coat hanger from the assist  
grips or coat hooks is dangerous as  
they can ꢁy oꢂ and hit an occupant  
in the cabin if a curtain air bag was to  
deploy, which could result in serious  
injury or death.  
Always hang clothes on the coat hooks  
and the assist grips without hangers.  
Storage tray  
The storage tray can be removed.  
Storage tray  
Coat hook  
5
–141  
MEMO  
5
–142  

Related Topics

Climate Control System Audio System Bluetooth? Interior Equipment

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot