2014-2018 Mazda 3 4 Door Interior Features -> Bluetooth? User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Interior Features -> Bluetooth? for Your Mazda 3 4 Door Third Generation (2014-2018)

Interior Features  
Bluetooth®  
Bluetooth®*  
Bluetooth® Hands-Free outline  
When a Bluetooth® device (mobile phone) is connected to the vehicle's Bluetooth® unit via  
radio wave transmission, a call can be made or received by pressing the talk button, pick-  
up button, or hang-up button on the audio remote control switch, or by operating the center  
display. For example, even if a device (mobile phone) is in your coat pocket, a call can be  
made without taking the device (mobile phone) out and operating it directly.  
Bluetooth® audio outline  
When a portable audio unit equipped with the Bluetooth® communication function is paired  
to the vehicle, you can listen to music stored on the paired portable audio device from the  
vehicle's speakers. It is not necessary to connect the portable audio device to the vehicle's  
external input terminal. After programming, operate the vehicle audio control panel to play/  
stop the audio.  
NOTE  
ꢀyꢀFor your safety, a device can be paired only when the vehicle is parked. If the vehicle  
starts to move, the pairing procedure will end. Park the vehicle in a safe place before  
pairing.  
ꢀyꢀThe communication range of a Bluetooth® equipped device is about 10 meters (32 ft) or  
less.  
ꢀyꢀBasic audio operation is available using voice commands even if Bluetooth® is not  
connected.  
*Some models.  
5
–77  
Interior Features  
Bluetooth®  
CAUTION  
Some Bluetooth® mobile devices are not compatible with the vehicle. Consult an  
Authorized Mazda Dealer, Mazda's call center or Web support center for information  
regarding Bluetooth® mobile device compatibility:  
ꢀ¾ꢀ  
U.S.A.  
Phone: 800-430-0153  
ꢀ
ꢀ
Web: www.MazdaUSA.com/bluetooth  
ꢀ¾ꢀ  
Canada  
ꢀ
Phone: 800-430-0153  
Web: www.mazdahandsfree.ca  
ꢀ
ꢀ¾ꢀ  
Mexico  
Center of Attention to Client (CAC)  
ꢀ
ꢀ
Phone: 01-800-01-MAZDA  
Web:  
www.mazdamexico.com.mx  
ꢀ
ꢀ
Applicable Bluetooth® specification (Recommended)  
Type A: Ver. 2.0  
Type B: Ver. 1.1/1.2/2.0 EDR/2.1 EDR/3.0 (conformity)  
Component Parts  
Audio unit  
Type A  
Type B  
Talk button, Pick-up button and Hang-up button  
Talk button  
Pick-up button  
Hang-up button  
Microphone  
Microphone  
5
–78  
Interior Features  
Bluetooth®  
Microphone (hands-free)  
The microphone is used for speaking voice commands or when making a Hands-free call.  
Talk button, Pick-Up button and Hang-Up button (hands-free)  
The basic functions of Bluetooth® Hands-Free can be used for such things as making calls or  
hanging up using the talk, pick-up and hang-up buttons on the steering wheel.  
Commander switch (Type B)  
The commander switch is used for volume adjustment and display operation. Tilt or turn the  
commander knob to move the cursor. Press the commander knob to select the icon.  
Volume adjustment  
The power/volume dial of the audio unit*1 or the volume dial of the commander switch*2  
is used to adjust the volume. Turn the dial to the right to increase volume, to the left to  
decrease it.  
The volume can also be adjusted using the volume button on the steering wheel.  
*1 Type A  
*2 Type B  
NOTE  
If the volume is lower compared to other audio modes, increase the volume from the device  
side.  
(Type B)  
Conversation volume and the volume of the voice guidance and ringtone can each be set in  
advance.  
1. Select the icon on the home screen and display the Communication screen.  
.
2. Select  
3. Adjust the  
and the  
using the slider.  
5
–79  
Interior Features  
Bluetooth®  
Bluetooth® Preparation (Type A)  
Bluetooth® Hands-Free Preparation  
Pairing code setting  
Device pairing  
To use Bluetooth® Hands-Free, the device  
equipped with Bluetooth® has to be paired  
to the hands-free unit using the following  
procedure.  
A maximum of seven devices including  
hands-free mobile phones and Bluetooth®  
audio devices can be paired to one vehicle.  
The 4-digit pairing code setting for  
registration of your cell phone (pairing)  
can be set beforehand.  
NOTE  
NOTE  
If a Bluetooth® device has already been  
paired to the vehicle as a Bluetooth® audio  
device, it does not need to be paired again  
when using the device as a hands-free  
mobile phone. Conversely, it does not need  
to be paired again as a Bluetooth® audio  
device if it has already been paired as a  
hands-free mobile phone.  
The initial setting value is “0000”.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
4. Say: [Beep] “Pairing options”  
5. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code.”  
6. Say: [Beep] “Set pairing code”  
7. Prompt: “Your current pairing code is  
XXXX. Do you want to change it to a  
different pairing code?”  
1. Activate the Bluetooth® application of  
the device.  
NOTE  
For the operation of the device, refer to its  
instruction manual.  
2. Press the pick-up button or talk button  
with a short press.  
3. Say: [Beep] “Setup”  
8. Say: [Beep] “Yes”  
9. Prompt: “Please say a 4-digit pairing  
code.”  
10.Say: [Beep] “YYYY”  
11.Prompt: “YYYY is this correct?”  
12.Say: [Beep] “Yes” or “No”  
13.If “Yes”, go to Step 14. If “No”, the  
procedure returns to Step 9.  
14.Prompt: “Your new pairing code is  
YYYY. Use this pairing code when  
pairing devices to the Hands free  
system. Do you want to pair a device  
now?”  
15.Say: [Beep] “Yes” or “No”  
16.If “Yes”, the system switches to the  
device registration mode. If “No”, the  
system returns to standby status.  
4. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
5. Say: [Beep] “Pairing options”  
6. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code.”  
7. Say: [Beep] “Pair”  
8. Prompt: “Start the pairing process on  
your Bluetooth® device. Your pairing  
code is 0000 (XXXX). Input this on  
your Bluetooth® device when prompted  
on the device. See device manual for  
instructions.”  
5
–80  
Interior Features  
Bluetooth®  
NOTE  
9. Using the device, perform a search  
for the Bluetooth® device (Peripheral  
device).  
ꢀyꢀWhen the pairing is completed, the  
symbol is displayed.  
ꢀyꢀSome Bluetooth® audio devices need a  
certain amount of time before the  
symbol is displayed.  
ꢀyꢀDevice registration can also be done by  
operating the audio unit.  
ꢀyꢀDepending on the device, the  
registration status may be lost after a  
certain period of time. If this occurs,  
repeat the entire process from Step 1.  
NOTE  
For the operation of the device, refer to its  
instruction manual.  
10.Select “Mazda” from the device list  
searched by the device.  
11.Input the 4-digit pairing code to the  
device.  
12.Prompt: “Please say the name of the  
device after the beep.”  
13.Say: [Beep] “XXXX - - -” (Say a  
“device tag”, an arbitrary name for the  
device.) Example: “Stan's device.”  
Registered device read-out  
Bluetooth® Hands-Free can read-out the  
devices registered to its system.  
NOTE  
NOTE  
Say a paired “device tag” within 10  
seconds.  
If more than two devices are to be paired,  
they cannot be paired with the same or  
similar “device tag”.  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to be  
effective.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
4. Say: [Beep] “Pairing options”  
5. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code”  
14.Prompt: “XXXXXX - - - (Ex. “Stan's  
device”) (Device tag). Is this correct?”  
15.Say: [Beep] “Yes”  
16.Prompt: “Pairing complete”  
After a device is registered, the system  
automatically identifies the device. By  
activating Bluetooth® Hands-Free again,  
or by activating Bluetooth® Hands-Free  
first after switching the ignition from  
OFF to ACC, the system reads out a voice  
guidance, “XXXXXX - - - (Ex. “Stan's  
device”) (Device tag) is connected”.  
6. Say: [Beep] “List”  
5
–81  
Interior Features  
Bluetooth®  
7. Prompt: “XXXXX..., XXXXX...,  
XXXXX... (Ex. Device A, device B,  
device C)” (The voice guidance reads  
out the device tags registered to the  
hands-free system.)  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
4. Say: [Beep] “Select phone”  
5. Prompt: “Please say the name of  
the device you would like to select.  
Available devices are XXXXX... (Ex.  
device A), XXXXX... (Ex. device B),  
XXXXX... (Ex. device C). Which  
device please?”  
Press the talk button with a short press  
during the read-out at the desired  
device, and then say one of the  
following voice commands to execute  
it.  
6. Say: [Beep] “XXXXX... (Ex. Device  
B)”  
7. Prompt: “XXXXX... (Ex. Device B).  
Is this correct?”  
8. Say: [Beep] “Yes” or “No”  
9. If “Yes”, go to Step 10. If “No”, the  
procedure returns to Step 5.  
10.Prompt: “XXXXX... (Ex. Device B)  
selected.”  
ꢀ
ꢀ
y “Select phone”: Selects device (Mobile  
phone) when the talk button is short-  
pressed.  
ꢀ
ꢀ
y “Select music player”: Selects device  
(Music player) when the talk button is  
short-pressed.  
ꢀ
ꢀ
y “Edit”: Edits device when the talk  
button is short-pressed.  
ꢀ
ꢀ
y “Continue”: Continues the list readout.  
ꢀ
ꢀ
y “Delete”: Deletes the registered device  
when the talk button is short-pressed.  
(Music player)  
ꢀ
ꢀ
y “Previous”: Returns to the previous  
device in read-out when the talk button  
is short-pressed.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
8. Prompt: “End of list, would you like to  
start from the beginning?”  
9. Say: [Beep] “No”  
10.Prompt: “Returning to main menu.”  
4. Say: [Beep] “Select music player”  
5. Prompt: “Please say the name of  
the device you would like to select.  
Available devices are XXXXX... (Ex.  
device A), XXXXX... (Ex. device B),  
XXXXX... (Ex. device C). Which  
device please?”  
6. Say: [Beep] “XXXXX... (Ex. Device  
B)”  
7. Prompt: “XXXXX... (Ex. Device B).  
Is this correct?”  
Device selection  
If several devices have been paired, the  
Bluetooth® unit links the device last  
paired. If you would like to link a different  
paired device, it is necessary to change the  
link. The order of device priority after the  
link has been changed is maintained even  
when the ignition is switched off.  
(Hands-free phone)  
8. Say: [Beep] “Yes” or “No”  
9. If “Yes”, go to Step 10. If “No”, the  
procedure returns to Step 5.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
5
–82  
Interior Features  
Bluetooth®  
10.Prompt: “XXXXX... (Ex. Device B)  
selected.”  
7. Prompt: “Please say the name of  
the device you would like to delete.  
Available devices are XXXXX... (Ex.  
device A), XXXXX... (Ex. device  
B), XXXXX... (Ex. device C), or all.  
Which device please?”  
NOTE  
ꢀyꢀWhen the selected device connection is  
completed, the or symbol is  
displayed.  
ꢀyꢀSome Bluetooth® audio devices need a  
certain amount of time before the or  
symbol is displayed.  
ꢀyꢀDevice (Music player) selection can  
also be done by operating the panel  
button.  
8. Say: [Beep] “X” (Say the number of  
the device to be deleted.)  
NOTE  
Say “All” to delete all devices (Mobile  
phone).  
9. Prompt: “Deleting XXXXX... (Ex.  
device B...) (Registered device tag). Is  
this correct?”  
Deleting a device  
10.Say: [Beep] “Yes”  
11.Prompt: “Deleted”  
Registered devices (Mobile phone) can be  
deleted individually or collectively.  
NOTE  
Registered device editing  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to be  
effective.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
4. Say: [Beep] “Pairing options”  
5. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code.”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
6. Say: [Beep] “Edit”  
4. Say: [Beep] “Pairing options”  
5. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code.”  
7. Prompt: “Please say the name of the  
device you would like to edit. Available  
devices are XXXXX... (Ex. device A),  
XXXXX... (Ex. device B), XXXXX...  
(Ex. device C). Which device please?”  
8. Say: [Beep] “X” (Say the number of  
the device to be edited.)  
NOTE  
A registered device (Mobile phone) can be  
deleted using the registration list.  
9. Prompt: “New name please?”  
10.Say: [Beep] “XXXXX... (Ex. Device  
C)” (Speak a “device tag” an arbitrary  
name for the device.)  
6. Say: [Beep] “Delete”  
11.Prompt: “XXXXX... (Ex. device C)  
(Device tag), is this correct?”  
5
–83  
Interior Features  
Bluetooth®  
12.Say: [Beep] “Yes”  
13.Prompt: “New name saved.”  
2. Turn the audio control dial and select a  
desired mode.  
Bluetooth® Audio Preparation  
Bluetooth® audio device set-up  
Bluetooth® audio pairing, changes,  
deletions, and display of paired device  
information can be performed.  
1. The mode changes as follows each time  
) is pressed.  
the menu button (  
Select “BT SETUP”.  
Display  
PAIR  
DEVICE  
Mode  
Function  
*
Bluetooth® audio  
device pairing  
Pairing mode  
Changing link to  
Bluetooth® audio  
device  
LINK Link change  
CHANGE mode  
Pairing  
PAIR  
DELETE  
mode  
Deleting link to  
Bluetooth® audio  
device  
deletion  
Device Displaying vehicle's  
information  
Bluetooth® unit  
display mode information  
DEVICE  
INFO  
*
3. Press the audio control dial to  
determine the mode.  
Bluetooth® audio device pairing  
Any Bluetooth® audio device must be  
paired to the vehicle's Bluetooth® unit  
before it can be listened to over the  
vehicle's speakers.  
* Depending on the mode selected, the  
indication changes.  
A maximum of seven devices including  
Bluetooth® audio devices and hands-  
free mobile phones can be paired to one  
vehicle.  
5
–
84  
Interior Features  
Bluetooth®  
3. Input the PIN code of your Bluetooth®  
audio device by pressing channel preset  
buttons 1 to 4 while “PIN 0000” is  
displayed.  
NOTE  
ꢀyꢀIf a Bluetooth® device has already been  
paired to the vehicle as a hands-free  
mobile phone, it does not need to be  
paired again when using the device as  
a Bluetooth® audio device. Conversely,  
it does not need to be paired again as  
a hands-free mobile phone if it has  
already been paired as a Bluetooth®  
audio device.  
Press channel preset button 1 to input  
the first digit, 2 for the second, 3 for the  
third, and 4 for the forth. For example,  
if the PIN code were “4213” press  
channel preset button 1 four times (1,  
2, 3, 4), button 2 twice (1, 2), button  
3 once (1), and button 4 three times  
(1, 2, 3). If the “PIN 0000” display  
disappears before finishing the PIN  
code input, repeat the procedure from  
Step 1.  
ꢀyꢀDevice registration can also be done  
using voice recognition.  
Concerning the operation of a Bluetooth®  
audio device itself, refer to its instruction  
manual.  
Some Bluetooth® audio devices have PIN  
codes (four digits). Refer to the audio  
device's instruction manual because the  
pairing procedure differs depending on  
whether it has a PIN code or not.  
NOTE  
Some devices accept only a particular  
pairing code (Usually, “0000” or  
“1234”).  
If pairing cannot be completed, refer to the  
owner's manual of your mobile device, and  
try those numbers if necessary.  
Pairing a Bluetooth® audio device which  
has a four-digit PIN code  
4. Press the audio control dial while  
the input PIN code is displayed.  
“PAIRING” flashes on the audio  
display.  
5. Operate the Bluetooth® audio device  
and set it to the pairing mode while  
“PAIRING” is flashing.  
6. When the pairing is completed, and  
“PAIR SUCCESS” are displayed after  
about 10-30 seconds, after which  
“PAIR SUCCESS” continues to be  
displayed for three seconds, and then  
the unit returns to the normal display.  
1. Using the audio control dial, select  
the pairing mode “PAIR DEVICE”  
in the “BT SETUP” mode. (Refer to  
“Bluetooth® audio device set-up” for  
details.)  
2. Press the audio control dial to  
determine the mode. After “ENTER  
PIN” is displayed on the audio display  
for three seconds, “PIN 0000” is  
displayed and the PIN code can be  
input.  
5
–85  
Interior Features  
Bluetooth®  
NOTE  
NOTE  
ꢀyꢀSome Bluetooth® audio devices need a  
certain amount of time before the  
symbol is displayed.  
ꢀyꢀIf the pairing failed, “Err” flashes for  
three seconds .  
ꢀyꢀPairing cannot be performed while  
the vehicle is moving. If you attempt  
to perform pairing while the vehicle is  
moving, “PAIR DISABLE” is displayed.  
ꢀyꢀIf seven Bluetooth® audio devices have  
already been paired to the vehicle,  
pairing cannot be performed and  
“MEMORY FULL” is displayed. Delete  
one paired device to pair another one.  
ꢀyꢀIf pairing cannot be completed, try  
“1234” instead. Refer to the owner's  
manual of your mobile device for the  
right PIN code.  
ꢀyꢀSome Bluetooth® audio devices need a  
certain amount of time before the  
symbol is displayed.  
ꢀyꢀIf the pairing failed, “Err” flashes for  
three seconds.  
ꢀyꢀPairing cannot be performed while  
the vehicle is moving. If you attempt  
to perform pairing while the vehicle is  
moving, “PAIR DISABLE” is displayed.  
ꢀyꢀIf seven Bluetooth® audio devices have  
already been paired to the vehicle,  
pairing cannot be performed and  
“MEMORY FULL” is displayed. Delete  
one paired device to pair another one.  
Pairing a Bluetooth® audio device which  
does not have a four-digit PIN code  
1. Using the audio control dial, select  
the pairing mode “PAIR DEVICE”  
in the “BT SETUP” mode. (Refer to  
“Bluetooth® audio set up” for details.)  
2. Press the audio control dial to  
determine the mode. After “ENTER  
PIN” is displayed on the audio display  
for three seconds, “PIN 0000” is  
displayed and the PIN code can be  
input.  
Device selection  
If several devices have been paired, the  
Bluetooth® unit links the device last  
paired. If you would like to link a different  
paired device, it is necessary to change the  
link. The order of device priority after the  
link has been changed is maintained even  
when the ignition is switched off.  
3. Press the audio control dial while “PIN  
0000” is displayed. “PAIRING” flashes  
on the audio display.  
4. Operate the Bluetooth® audio device  
and set it to the pairing mode while  
“PAIRING” is flashing.  
5. As the Bluetooth® audio device  
requires a PIN code, input “0000”.  
6. When the pairing is completed, and  
“PAIR SUCCESS” are displayed after  
about 10-30 seconds, after which  
“PAIR SUCCESS” continues to be  
displayed for three seconds, and then  
the unit returns to the normal display.  
1. Using the audio control dial, select the  
link change mode “LINK CHANGE”  
in the “BT SETUP” mode. (Refer to  
“Bluetooth® audio device set-up” for  
details.)  
2. Press the audio control dial to  
determine the mode.  
3. The name of the currently linked  
Bluetooth® audio device is displayed.  
If no Bluetooth® audio device is  
currently linked, the name of the first  
device among the paired devices is  
displayed.  
5
–86  
Interior Features  
Bluetooth®  
NOTE  
4. Turn the audio control dial to select the  
name of the device you would like to  
link.  
ꢀyꢀSome Bluetooth® audio devices need a  
certain amount of time before the  
symbol is displayed.  
ꢀyꢀIf a hands-free type mobile phone has  
been the most recently paired device,  
the Bluetooth® unit links this device.  
If you would like to use a Bluetooth®  
audio type device which has been  
previously paired to the Bluetooth® unit,  
the link must be changed to this device.  
ꢀyꢀIf an error occurs while trying to link  
a device, “Err” flashes in the audio  
display for three seconds, and the  
display returns to “LINK CHANGE”.  
If this occurs, check the pairing status  
of the Bluetooth® audio device and the  
location of the device in the vehicle (not  
in the trunk or a metal-type box), and  
then try the link operation again.  
ꢀyꢀDevice selection can also be done using  
voice recognition.  
Device name 1  
Device name 2  
Device name 3  
Device name 4  
Device name 5  
Device name 6  
Device name 7  
5. Press the audio control dial to select the  
device you would like to link. The  
symbol disappears, and “PAIRING”  
flashes in the audio display.  
How to confirm the device currently  
linked  
Switch to the link-change mode. (Refer to  
“Changing the link to a Bluetooth® audio  
device”)  
The device name displayed first is the  
device which is currently linked.  
NOTE  
When “GO BACK” is selected and the  
audio control dial is pressed, the display  
returns to “LINK CHANGE”.  
6. If the link to the desired device is  
successful, the symbol is displayed  
again, together with “LINK  
Deleting a device  
1. Using the audio control dial, select the  
pairing delete mode “PAIR DELETE”  
in the “BT SETUP”mode. (Refer to  
“Bluetooth® audio device set-up” for  
details.)  
CHANGED”. “LINK CHANGED” is  
displayed for three seconds, then it  
returns to the normal display.  
2. Press the audio control dial to  
determine the mode.  
3. The name of the first device among the  
paired devices is displayed.  
5
–87  
Interior Features  
Bluetooth®  
NOTE  
4. Rotate the audio control dial and select  
the name of the paired device you  
would like to delete.  
Select “GO BACK” and press the audio  
control dial to return to the “PAIR  
DELETE” display.  
Device name 1  
Device name 2  
Device name 3  
8. “PAIR DELETED” is displayed for  
three seconds after the deletion is  
completed, and then it returns to the  
normal display.  
NOTE  
If an error occurs while trying to delete  
the paired device, “Err” flashes in the  
display for three seconds and the display  
returns to “LINK DELETE”.  
Device name 4  
Device name 5  
Bluetooth® audio device information  
display  
Device name 6  
Device name 7  
1. Using the audio control dial, select the  
pair device information display mode  
“DEVICE INFO” in the “BT SETUP”  
mode. (Refer to “Bluetooth® audio  
device set-up” for details.)  
NOTE  
2. Press the audio control dial to  
determine the mode.  
3. The name of the Bluetooth® unit device  
is displayed.  
Only the names of paired devices can be  
displayed. If only one device is paired,  
only the name for this device is displayed.  
4. Rotate the audio control dial to select  
the information for the Bluetooth® unit  
which you would like to view.  
5. If a selection other than “GO BACK”  
is made and the audio control dial is  
pressed, “SURE ? NO” is displayed.  
6. Rotate the audio control dial clockwise  
and switch the display to “SURE ?  
YES”.  
Device name  
BT address  
NOTE  
The display changes as follows depending  
on whether the audio control dial is  
rotated clockwise or counterclockwise.  
-Clockwise: “SURE ? YES” displayed  
-Counterclockwise: “SURE ? NO”  
displayed  
NOTE  
When “GO BACK” is selected and the  
audio control dial is pressed, the display  
returns to “DEVICE INFO”.  
7. Press the audio control dial to delete  
the selected device.  
5
–88  
Interior Features  
Bluetooth®  
8. Say: [Beep] “Yes”  
Available Language (Type A)  
9. Prompt: “French (Desired language)  
selected” (Spoken in the newly selected  
language).  
The available languages are English,  
Spanish, and Canadian French. If the  
language setting is changed, all of the  
voice guidance and voice input commands  
are done in the selected language.  
(Method 2)  
1. Press the pick-up button or talk button  
with a short press.  
NOTE  
ꢀyꢀIf the language setting is changed,  
device registration is maintained.  
ꢀyꢀPhonebook records are not cleared,  
but each language has a separate  
phonebook. Therefore, entries created in  
one language will need to be re-entered  
in the phonebook of the new language.  
ꢀyꢀDo these steps before you start driving.  
These less used functions are too  
distracting to undertake while driving  
until you are fully familiar with the  
system.  
2. Say: [Beep] “French” (Say the desired  
language: “English”, “French” or  
“Spanish”). (Change the desired  
language by saying the language  
name.)  
NOTE  
Other language settings can also be made  
while in the current setting by saying  
the name of the language in the native  
pronunciation.  
3. Prompt: “Would you like to change  
the language to French (Desired  
language)?”  
(Method 1)  
4. Say: [Beep] “Yes”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
5. Prompt: “Please wait. Switching to  
French phonebook. French selected”  
(Spoken in the newly selected  
language).  
Voice Recognition (Type A)  
4. Say: [Beep] “Language”  
5. Prompt: “Select a language: English,  
French, or Spanish.”  
6. Say: [Beep] “French” (Speak the  
desired language: “English”, “French”  
or “Spanish”)  
In this section, the basic operation of the  
voice recognition is explained.  
Activating Voice Recognition  
To Activate the Main Menu: Press the  
pick-up button or talk button with a short  
press.  
NOTE  
Ending Voice Recognition  
Other language settings can also be made  
while in the current setting by saying  
the name of the language in the native  
pronunciation.  
Use one of the following methods:  
ꢀyꢀ  
Press and hold the talk-button.  
ꢀyꢀ  
Press the hang-up button.  
7. Prompt: “French (Desired language)  
selected. Is this correct?”  
5
–89  
Interior Features  
Bluetooth®  
Skipping Voice Guidance (for faster  
operation)  
Help function use  
The help function informs the user of all  
the available voice commands under the  
current conditions.  
Press and release the talk-button.  
NOTE  
ꢀyꢀThe Bluetooth® Hands-Free system  
is operable several seconds after the  
ignition is switched to ACC or ON  
(requires less than 15 seconds).  
1. Say: [Beep] “Help”  
2. Follow the prompts to receive the  
appropriate voice guidance instructions.  
ꢀyꢀWhen operating the audio unit or the  
A/C while using Bluetooth® Hands-  
Free, the beep sounds or voice guidance  
(audio unit)/cannot be heard.  
Returning to previous operation  
This command is for returning to the  
previous operation while in the voice  
recognition mode.  
Say: [Beep] “Go Back”  
To prevent a deterioration in the voice  
recognition rate and voice quality, the  
following points should be observed:  
Tutorial  
The tutorial explains how to use  
Bluetooth® Hands-Free.  
To activate the tutorial, do the following:  
ꢀyꢀ  
The voice recognition cannot be  
performed while voice guidance or  
the beep sound is operating. Wait  
until the voice guidance or the beep  
sound is finished before saying your  
commands.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Tutorial”  
3. Follow the prompts to receive the  
appropriate voice guidance instructions.  
ꢀyꢀ  
Dialects or different wording other  
than hands-free prompts cannot be  
recognized by voice recognition. Speak  
in the wording specified by the voice  
commands.  
Commands useable anytime during  
voice recognition  
“Help” or “Go Back” are commands  
which can be used at anytime during voice  
recognition.  
ꢀyꢀ  
It is not necessary to face the  
microphone or approach it. Speak the  
voice commands while maintaining a  
safe driving position.  
ꢀyꢀ  
Do not speak too slow or too loud.  
ꢀyꢀ  
Speak clearly, without pausing between  
words or numbers.  
ꢀyꢀ  
Close the windows and/or the moonroof  
to reduce loud noises from outside  
the vehicle, or turn down the airflow  
of the air-conditioning system while  
Bluetooth® Hands-Free is being used.  
ꢀyꢀ  
Make sure the vents are not directing air  
up towards the microphone.  
5
–90  
Interior Features  
Bluetooth®  
Using Bluetooth® Hands-Free with a  
passcode  
NOTE  
If the voice recognition performance is not  
satisfactory.  
Refer to Voice Recognition Learning  
Function (Speaker Enrollment) (Type A)  
on page 5-92.  
1. Press the pick-up button or talk button  
with a short press.  
2. Prompt: “Hands-Free system is  
locked. State the passcode to continue.”  
3. Say: [Beep] “XXXX” (Say the set  
passcode “PCode”.)  
Refer to Troubleshooting on page 5-131.  
4. If the correct passcode is input, voice  
guidance “XXXXXX... (Ex. “Mary's  
device”) (Device tag) is connected” is  
announced.  
Security Setting (Type A)  
If a passcode is set, the system cannot be  
activated unless the passcode is input.  
If the passcode is incorrect, voice  
guidance “XXXX (4-digit passcode,  
Pcode) incorrect passcode, please try  
again” is announced.  
NOTE  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to be  
effective.  
Canceling the passcode  
Passcode setting  
NOTE  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to be  
effective.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
4. Say: [Beep] “Passcode”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
5. Prompt: “Passcode is disabled. Would  
you like to enable it?”  
6. Say: [Beep] “Yes”  
7. Prompt: “Please say a 4-digit  
passcode. Remember this passcode. It  
will be required to use this system.”  
8. Say: [Beep] “XXXX” (Say a desired  
4-digit passcode, “PCode”.)  
4. Say: [Beep] “Passcode”  
5. Prompt:“Passcode is enabled. Would  
you like to disable it?”  
6. Say: [Beep] “Yes”  
7. Prompt:“Passcode is disabled.”  
9. Prompt:“Passcode XXXX (Passcode,  
PCode). Is this correct?”  
10.Say: [Beep] “Yes”  
11.Prompt:“Passcode is enabled.”  
5
–91  
Interior Features  
Bluetooth®  
Confirmation Prompts  
Voice Recognition Learning  
Function (Speaker Enrollment)  
(Type A)  
The confirmation prompt confirms the  
command content to the user before  
advancing to the operation requested by  
the user. When this function is turned  
on, the system reads out the voice  
input command previously received  
and confirms whether the command is  
correct before advancing to the command  
execution.  
When the confirmation prompt function is  
turned on:  
(Ex. “Calling John's device. Is this  
correct?”)  
The voice recognition learning function  
enables voice recognition appropriate to  
the characteristics of the user's voice. If the  
recognition of the voice input commands  
to the system is not adequate, this function  
can largely improve the system's voice  
recognition of the user. If your voice can  
be recognized sufficiently without using  
this function, you may not realize the  
added benefit of the function. To register  
your voice, the voice input command  
list must be read out. Read out the list  
when the vehicle is parked. Perform the  
registration in as quiet a place as possible  
5-89. The registration must be performed  
completely. The required time is a few  
minutes. The user needs to be seated in the  
driver's seat with the voice input command  
list for voice recognition learning open to  
the page indicated below.  
When the confirmation prompt function is  
turned off:  
(Ex. “Calling John's device.”)  
NOTE  
If the confirmation prompt function is  
turned off when making an emergency  
call, the system reads out and confirms the  
command before executing it.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
When voice recognition learning is done  
for the first time  
1. Press the pick-up button or talk button  
with a short press.  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
4. Say: [Beep] “Confirmation prompts”  
5. Prompt: “Confirmation prompts  
are on/off. Would you like to turn  
confirmation prompts off/on?”  
6. Say: [Beep] “Yes”  
2. Say: [Beep] “Voice training”  
3. Prompt: “This operation must be  
performed in a quiet environment while  
the vehicle is stopped. See the owner's  
manual for the list of required training  
phrases. Press and release the talk  
button when you are ready to begin.  
Press the hang-up button to cancel at  
any time.”  
7. Prompt: “Confirmation prompts are  
off/on.”  
4. Press the talk button with a short press.  
5. The voice guidance reads out the voice  
input command number (refer to the  
voice input command list for voice  
recognition learning). (Ex. “Please read  
phrase 1”)  
5
–92  
Interior Features  
Bluetooth®  
NOTE  
6. Say: [Beep] “0123456789” (Say  
the voice input command for voice  
recognition learning (1 to 8) according  
to the voice guidance.)  
7. Prompt: “Speaker enrollment is  
complete.”  
If an error occurred in the voice  
recognition learning, re-learning can be  
done by pressing the talk button with a  
short press.  
Voice input command list for voice  
recognition learning  
NOTE  
If an error occurred in the voice  
recognition learning, re-learning can be  
done by pressing the talk button with a  
short press.  
When reading out, the following points  
must be observed:  
ꢀyꢀ  
Read out the numbers one at a time  
correctly and naturally.  
Voice recognition re-learning  
ꢀ(For example, “1234” must be read out  
“one, two, three, four” not “twelve,  
thirty four”.)  
If voice recognition learning has already  
been done.  
ꢀyꢀ  
Do not read out parentheses. “(” and  
hyphens “-” are used for separating  
numbers in a phone number.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Voice training”  
3. Prompt: “Enrollment is enabled/  
disabled. Would you like to disable/  
enable or retrain?”  
Ex.  
“(888) 555-1212” must be spoken “Eight,  
eight, eight, five, five, five, one, two, one,  
two.”  
4. Say: [Beep] “Retrain”  
5. Prompt: “This operation must be  
performed in a quiet environment while  
the vehicle is stopped. See the owner's  
manual for the list of required training  
phrases. Press and release the talk  
button when you are ready to begin.  
Press the hang-up button to cancel at  
any time.”  
6. Press the talk button with a short press.  
7. The voice guidance reads out the voice  
input command number (refer to the  
voice input command list for voice  
recognition learning). (Ex. “Please read  
phrase 1”)  
8. Say: [Beep] “0123456789” (Say  
the voice input command for voice  
recognition learning (1 to 8) according  
to the voice guidance.)  
9. Prompt: “Speaker enrollment is  
complete.”  
Phrase  
Command  
0123456789  
1
2
3
4
5
6
7
8
(888) 555-1212  
Call  
Dial  
Setup  
Cancel  
Continue  
Help  
NOTE  
ꢀyꢀThe applicable phrase appears in the  
audio display.  
ꢀyꢀAfter user voice registration is  
completed, voice guidance “Speaker  
enrollment is complete” is announced.  
5
–93  
Interior Features  
Bluetooth®  
Voice recognition learning on/off  
5. Select  
to display the  
1. Press the pick-up button or talk button  
with a short press.  
message and switch to the device  
operation.  
2. Say: [Beep] “Voice training”  
3. Prompt: “Enrollment is enabled/  
disabled. Would you like to disable/  
enable or retrain?”  
4. Say: [Beep] “Disable” or “Enable”  
5. When “Disable” is spoken, the voice  
recognition learning is turned off.  
When “Enable” is spoken, the voice  
recognition learning is turned on.  
6. Prompt: “Speaker Enrollment is  
disabled/enabled.”  
6. Using your device, perform a search  
for the Bluetooth® device (Peripheral  
device).  
7. Select “Mazda” from the device list  
searched by the device.  
8. (Device with Bluetooth® version 2.0)  
Input the displayed 4-digit pairing code  
into the device.  
(Device with Bluetooth® version 2.1  
or higher)  
Make sure the displayed 6-digit code  
on the audio is also displayed on the  
Bluetooth® Preparation (Type B)  
device, and touch the  
.
Connection permission and phonebook  
access permission for your mobile  
device may be required depending on  
the mobile device.  
Device pairing  
To use Bluetooth® audio and Hands-Free,  
the device equipped with Bluetooth® has  
to be paired to the unit using the following  
procedure. A maximum of seven devices  
including Bluetooth® audio devices and  
hands-free mobile phones can be paired.  
9. If pairing is successful, the functions of  
the device connected to Bluetooth® are  
displayed.  
10.(Devices compatible with Mazda  
Email / SMS function)  
NOTE  
SMS (Short Message Service)  
messages, and E-mail for the device are  
downloaded automatically. A download  
permission operation for your device  
may be required depending on the  
device.  
The Bluetooth® system may not operate  
for 1 or 2 minutes after the ignition  
is switched to ACC or ON. However,  
this does not indicate a problem. If the  
Bluetooth® system does not connect  
automatically after 1 or 2 minutes have  
elapsed, make sure that the Bluetooth®  
setting on the device is normal and attempt  
to reconnect the Bluetooth® device from  
the vehicle side.  
NOTE  
When Call history and messages are  
downloaded automatically, each automatic  
download setting must be on.  
Refer to Communication Settings on page  
5-114.  
Pairing Procedure  
1. Select the icon on the home screen  
and display the Settings screen.  
2. Select the  
3. Select  
tab.  
.
4. Turn the Bluetooth® setting on.  
5
–94  
Interior Features  
Bluetooth®  
After a device is registered, the system  
automatically identifies the device. By  
activating Bluetooth® Hands-Free again, or  
by activating Bluetooth® Hands-Free first  
after switching the ignition from OFF to  
ACC, the device connection condition is  
indicated in the center display.  
6.  
selection  
Connects both devices as hands-free  
and Bluetooth® audio.  
selection  
Connects as a hands-free device.  
selection  
Connects as Bluetooth® audio.  
IMPORTANT note about pairing and  
automatic reconnection:  
NOTE  
The following functions can be used for  
the Hands-free or audio.  
ꢀyꢀ  
If pairing is redone on the same  
mobile phone device, first clear  
“Mazda” displayed on the Bluetooth®  
setting screen of the mobile device.  
ꢀyꢀ  
When the OS of the device is updated,  
the pairing information may be deleted.  
If this happens, reprogram the pairing  
information to the Bluetooth® unit.  
ꢀyꢀHands-free: Phone calls and E-mail/  
SMS  
ꢀyꢀAudio: Bluetooth® audio, Pandora®,  
Aha™, Stitcher™ radio  
Disconnecting a device  
ꢀyꢀ  
Before you pair your device, make sure  
that Bluetooth® is “ON”, both on your  
phone and on the vehicle.  
1. Select the icon on the home screen  
and display the Settings screen.  
2. Select the  
3. Select  
tab.  
.
Device selection  
4. Turn the Bluetooth® setting on.  
5. Select the device name which is  
currently connected.  
If several devices have been paired, the  
Bluetooth® unit links the device last  
paired. If you would like to link a different  
paired device, it is necessary to change the  
link. The order of device priority after the  
link has been changed is maintained even  
when the ignition is switched off.  
6. Select  
.
Deleting a device  
Selecting and deleting devices  
1. Select the icon on the home screen  
and display the Settings screen.  
Connecting other devices  
2. Select the  
3. Select  
tab.  
1. Select the icon on the home screen  
and display the Settings screen.  
.
4. Turn the Bluetooth® setting on.  
5. Select the device name which you  
would like to delete.  
2. Select the  
3. Select  
tab.  
.
4. Turn the Bluetooth® setting on.  
5. Select the name of the device you  
would like to connect.  
6. Select  
7. Select  
.
.
5
–95  
Interior Features  
Bluetooth®  
Deleting all devices  
Ending Voice Recognition  
1. Select the icon on the home screen  
and display the Settings screen.  
Use one of the following methods:  
ꢀyꢀ  
Press the hang-up button.  
ꢀyꢀ  
Say, “Cancel”.  
2. Select the  
3. Select  
4. Select  
5. Select  
6. Select  
tab.  
.
ꢀyꢀ  
Operate the commander switch or the  
center display (only when vehicle is  
stopped).  
.
.
.
Skipping Voice Guidance (for faster  
operation)  
Changing PIN code  
PIN code (4 digits) can be changed.  
Press and release the talk button.  
1. Select the icon on the home screen  
and display the Settings screen.  
Troubleshooting for Voice Recognition  
If you do not understand an operation  
method while in the voice recognition  
mode, say “Tutorial” or “Help”.  
2. Select the  
3. Select  
4. Select  
5. Select  
tab.  
.
.
.
Commands useable anytime during  
voice recognition  
6. Input the new PIN code to be set.  
7. Select  
.
“Go Back” and “Cancel” are commands  
which can be used at anytime during voice  
recognition.  
Available Language (Type B)  
The Bluetooth® Hands-Free System  
applies to the following languages:  
Returning to previous operation  
To return to the previous operation, say,  
“Go Back” while in voice recognition  
mode.  
ꢀyꢀ  
English  
ꢀyꢀ  
Spanish  
ꢀyꢀ  
French  
Cancel  
Refer to Settings on page 5-55.  
To put the Bluetooth® Hands-Free system  
in standby mode, say, “Cancel” while in  
voice recognition mode.  
Voice Recognition (Type B)  
In this section, the basic operation of the  
voice recognition is explained.  
Activating Voice Recognition  
Press the talk button.  
5
–96  
Interior Features  
Bluetooth®  
To prevent a deterioration in the voice  
recognition rate and voice quality, the  
following points should be observed:  
ꢀyꢀ  
The voice recognition cannot be  
performed while voice guidance or  
the beep sound is operating. Wait  
until the voice guidance or the beep  
sound is finished before saying your  
commands.  
ꢀyꢀ  
Phone related commands are available  
only when your phone is connected via  
Bluetooth®. Make sure your phone is  
connected via Bluetooth® before you  
operate phone related voice commands.  
ꢀyꢀ  
Music play commands, such as Play  
Artist and Play Album can be used only  
in USB audio mode.  
ꢀyꢀ  
Do not speak too slowly or loudly (no  
loud voice).  
ꢀyꢀ  
Speak clearly, without pausing between  
words or numbers.  
ꢀyꢀ  
Dialects or different wording other  
than hands-free prompts cannot be  
recognized by voice recognition. Speak  
in the wording specified by the voice  
commands.  
ꢀyꢀ  
It is not necessary to face the  
microphone or approach it. Speak the  
voice commands while maintaining a  
safe driving position.  
ꢀyꢀ  
Close the windows and/or the moonroof  
to reduce loud noises from outside  
the vehicle, or turn down the airflow  
of the air-conditioning system while  
Bluetooth® Hands-Free is being used.  
ꢀyꢀ  
Make sure the vents are not directing air  
up towards the microphone.  
NOTE  
If the voice recognition performance is not  
satisfactory.  
Refer to Troubleshooting on page 5-131.  
5
–97  
Interior Features  
Bluetooth®  
Audio Operation Using Voice Recognition (Type B)  
Main audio operation  
The below commands are examples of the available commands.  
When the talk button is pressed and the following command is spoken out, the audio can be  
operated. The commands in the () can be omitted. The specified name and number are put  
into the {}.  
Corresponding audio  
source  
Voice command  
Function  
(Go to/Play) AM (Radio)  
(Go to/Play) FM (Radio)  
Switches the audio source to AM radio.  
Switches the audio source to FM radio.  
All  
All  
(Go to/Play) Bluetooth (Audio) Switches the audio source to BT audio.  
All  
(Go to/Play) Pandora  
Switches the audio source to Pandora®  
Switches the audio source to Aha™ Radio.  
Switches the audio source to Stitcher™ Radio.  
Switches the audio source to USB 1.  
Switches the audio source to USB 2.  
Plays the selected playlist.  
All  
(Go to/Play) Aha (Radio)  
(Go to/Play) Stitcher  
All  
All  
(Go to/Play) USB 1  
All  
(Go to/Play) USB 2  
All  
Play Playlist {Playlist name}  
Play Artist {Artist name}  
Play Album {Album name}  
Play Genre {Genre name}  
Play Folder {Folder name}  
USB  
USB  
USB  
USB  
USB  
Plays the selected artist.  
Plays the selected album.  
Plays the selected genre.  
Plays the selected folder.  
NOTE  
ꢀyꢀSome commands cannot be used depending on devices and use conditions.  
ꢀyꢀIf the Bluetooth® device, USB, or AUX is not connected, the related commands cannot be  
used.  
5
–98  
Interior Features  
Bluetooth®  
Bluetooth® Hands-Free  
(Type A)*  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
Making a Call  
4. Say: [Beep] “New entry”  
5. Prompt: “Name please.”  
6. Say: [Beep] “XXXXX... (Ex. “Mary's  
phone”)” (Say a voice tag for the name  
registered.)  
7. Prompt: “Adding XXXXX... (Ex.  
“Mary's phone”) (Registered voice tag).  
Is this correct?”  
8. Say: [Beep] “Yes”  
9. Prompt: “Home, Work, Mobile, or  
Other?”  
10.Say: [Beep] “Mobile” (Say “Home”  
, “Work”, “Mobile”, or “Other”, for  
the desired location to be registered.)  
11.Prompt: “Mobile (Location to be  
registered). Is this correct?”  
Phonebook Usage  
Telephone calls can be made by saying  
the name of a person (voice tag) whose  
phone number has been registered in  
Bluetooth® Hands-Free in advance. Refer  
to Phonebook registration.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Call”  
3. Prompt: “Name please.”  
4. Say: [Beep] “XXXXX... (Ex. “John's  
phone”)” (Say a voice tag registered in  
the phonebook.)  
5. Prompt: “Calling XXXXX... (Ex.  
“John's phone”) XXXX (Ex. “at  
home”). Is this correct?” (Voice tag and  
phone number location registered in  
phonebook).  
12.Say: [Beep] “Yes”  
13.Prompt: “Number, please.”  
14.Say: [Beep] “XXXXXXXXXXX”  
(Say the phone number to be  
registered.)  
6. Say: [Beep] “Yes”  
7. Prompt: “Dialing”  
15.Prompt: “XXXXXXXXXXX (Phone  
number registration). After the beep,  
continue to add numbers, or say  
Go-Back to re-enter the last entered  
numbers, or press the Pick-Up button to  
save the number.”  
NOTE  
The “Call” command and the voice tag  
can be combined.  
Ex. In Step 2, say, “Call John's phone”,  
then, Steps 3 and 4 can be skipped.  
Phonebook registration  
Phone numbers can be registered to the  
Bluetooth® Hands-Free phonebook.  
NOTE  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to be  
effective.  
*Some models.  
5
–99  
Interior Features  
Bluetooth®  
16.(Registration)  
Press the pick-up button or say “Enter”,  
then go to Step 17.  
6. Device (Mobile phone) operation:  
Select one entry from the phonebook  
and send it using Bluetooth®.  
7. Prompt: “X (Number of locations  
which include data) numbers have been  
imported. What name would you like to  
use for these numbers?”  
8. Say: [Beep] “XXXXX... (Ex. “Mary's  
phone”)” (Say a voice tag for the name  
registered.)  
(Adding/inputting telephone  
number)  
Say, “XXXX” (desired telephone  
number), then go to Step 15.  
(Telephone number correction)  
Say, “Go Back”. The prompt replies,  
“Go Back. The last entered numbers  
have been removed.”. Then go back to  
Step 13.  
9. Prompt: “Adding XXXXX... (Ex.  
“Mary's phone”) (Voice tag). Is this  
correct?”  
17.Prompt: “Number saved. Would you  
like to add another number for this  
entry?”  
18.Say: [Beep] “Yes” or “No”.  
19.If “Yes”, an additional phone number  
registration can be made for the same  
entry.  
10.Say: [Beep] “Yes”  
11.Prompt: “Number saved. Would you  
like to import another contact?”  
12.Say: [Beep] “Yes” or “No”  
13.If “Yes”, the procedure proceeds to  
Step 5.  
If “No”, the system returns to standby  
status.  
If “No”, the procedure proceeds to Step  
14.  
(Import contact)  
Editing phonebook  
The data registered to the Bluetooth®  
Hands-Free phonebook can be edited.  
Phonebook data from your device (Mobile  
phone) can be sent and registered to your  
Bluetooth® Hands-Free phonebook using  
Bluetooth®.  
NOTE  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to be  
effective.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
4. Say: [Beep] “Edit”  
5. Prompt: “Please say the name of the  
entry you would like to edit or say,  
“List names”.”  
4. Say: [Beep] “Import contact”  
5. Prompt: “The hands free System  
is ready to receive a contact from a  
phone. Only a home, a work, and a  
mobile number can be imported, This  
process requires operation of a mobile  
phone. refer to the phone's manual for  
more information”  
5
–100  
Interior Features  
Bluetooth®  
6. Say: [Beep] “XXXXX... (Ex. “Mary's  
phone”)” (Say the voice tag for the  
registered name to be edited in the  
phonebook.)  
7. Prompt: “Home, Work, Mobile, or  
Other?”  
8. Say: [Beep] “Home” (Say the  
registered location to be edited:  
“Home”, “Work”, “Mobile”, or  
“Other”.)  
9. Prompt: “XXXXX... (Ex. “Mary's  
phone”) (Registered voice tag) XXXX  
(Ex. “Home”) (Registered location). Is  
this correct?”  
14.(Number Change)  
Press the pick-up button, then go to  
Step 15.  
(Adding/inputting telephone  
number)  
Say, “XXXX” (desired telephone  
number), then go to Step 13.  
(Telephone number correction)  
Say, “Go Back”. The prompt replies,  
“Go Back. The last entered numbers  
have been removed. Number, please.”.  
Then go back to Step 12.  
15.Prompt: “Number changed.”  
10.Say: [Beep] “Yes”  
Phonebook data deletion  
11.Prompt: “The current number is  
XXXXXXXXXXX (Ex. “555-1234”)  
(Currently registered number). New  
number, please.”  
(Erasing individual phonebook data)  
Individual data registered to the  
Bluetooth® Hands-Free phonebook can be  
cleared.  
NOTE  
If there was no previous phone number  
registered to a location (Ex. “Work”),  
the prompt will only read out “Number,  
please”  
NOTE  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to be  
effective.  
12.Say: [Beep] “XXXXXXXXXXX (Ex.  
“555-5678”)” (Say the new phone  
number to be registered.)  
13.Prompt: “XXXXXXXX (Telephone  
number) After the beep, continue to add  
numbers, or say Go-Back to re-enter  
the last entered numbers, or press the  
Pick-Up button to save the number.”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
4. Say: [Beep] “Delete”  
5. Prompt: “Please say the name of the  
entry you would like to delete or say,  
“List names”. ”  
6. Say: [Beep] “XXXXX... (Ex. “John's  
phone”) ” (Say the registered voice tag  
to be deleted from the phonebook.)  
7. Prompt: “Deleting XXXXX... (Ex.  
“John's phone”) (Registered voice tag)  
Home (Registered location). Is this  
correct?”  
8. Say: [Beep] “Yes”  
5
–101  
Interior Features  
Bluetooth®  
9. Prompt: “XXXXX... (Ex. “John's  
phone”) (Registered voice tag) Home  
(Registered location) deleted.”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
4. Say: [Beep] “List names”  
5. Prompt: “XXXXX..., XXXXX...,  
XXXXX... (Ex. “John's phone”,  
Mary's phone, Bill's phone)” (Voice  
guidance reads out the voice tags  
registered to the phonebook.)  
(Complete deletion of the phonebook  
data)  
All data registered to the Bluetooth®  
Hands-Free phonebook can be erased.  
Press the talk button with a short press  
during the read-out at the desired name,  
and then say one of the following voice  
commands to execute it.  
NOTE  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to be  
effective.  
ꢀ
ꢀ
y “Continue”: Continues the list readout.  
ꢀ
ꢀ
y “Call”: Calls the registered phonebook  
data when the talk button is short-  
pressed.  
y “Edit”: Edits the registered phonebook  
data when the talk button is short-  
pressed.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
4. Say: [Beep] “Erase all”  
5. Prompt: “Are you sure you want to  
erase everything from your Hands Free  
system phonebook?”  
ꢀ
ꢀ
ꢀ
ꢀ
y “Delete”: Deletes the registered  
phonebook data when the talk button is  
short-pressed.  
ꢀ
ꢀ
y “Previous”: Returns to the previous  
phonebook data in read-out when the  
talk button is short-pressed.  
6. Say: [Beep] “Yes”  
7. Prompt: “You are about to delete  
everything from your Hands Free  
system phonebook. Do you want to  
continue?”  
6. Prompt: “End of list, would you like to  
start from the beginning?”  
7. Say: [Beep] “No”  
8. Say: [Beep] “Yes”  
8. The procedure returns to Step 3.  
9. Prompt: “Please wait, erasing the  
Hands Free system phonebook.”  
10.Prompt: “Hands-Free system  
phonebook erased.”  
Redial Function  
Redialing the number of the person  
previously dialed using the phone is  
possible.  
Read-out of names registered to the  
Bluetooth® Hands-Free phonebook  
Bluetooth® Hands-Free can read out the  
list of names registered to its phonebook.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Redial”  
3. Prompt: “Dialing”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Phonebook”  
5
–102  
Interior Features  
Bluetooth®  
Telephone Number Input  
Emergency calls  
A call can be made to the emergency  
phone number (911: U.S.A./Canada, 066:  
Mexico) using the voice input command.  
It may not function properly in some areas  
in Mexico.  
NOTE  
Practice this while parked until you are  
confident you can do it while driving in a  
non-taxing road situation. If you are not  
completely comfortable, make all calls  
from a safe parking position, and only  
start driving when you can devote your full  
attention to driving.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Emergency”  
3. - U.S.A./Canada vehicles - Prompt:  
“Dialing “911”, is this correct?”  
- Mexico vehicles - Prompt: “Dialing  
“066”, is this correct?”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Dial”  
3. Prompt: “Number, please”  
4. Say: [Beep] “XXXXXXXXXXX  
(Telephone number)”  
4. Say: [Beep] “Yes”  
5. Prompt: “Dialing”  
5. Prompt: “XXXXXXXXXXX.  
(Telephone number) After the beep,  
continue to add numbers, or say  
Go-Back to re-enter the last entered  
numbers, or press the Pick-Up button to  
execute dialing.”  
Receiving an Incoming Call  
1. Prompt: “Incoming call, press the  
pick-up button to answer”  
2. To accept the call, press the pick-up  
button.  
6. (Dialing)  
To reject the call, press the hang-up  
button.  
Press the pick-up button or say “Dial”,  
then go to Step 7.  
(Adding/inputting telephone  
number)  
Hanging Up a Call  
Press the hang-up button during the call. A  
beep sound will confirm that call is ended.  
Say, “XXXX” (desired telephone  
number), then go to Step 5.  
(Telephone number correction)  
Say, “Go Back”. The prompt replies,  
“Go Back. The last entered numbers  
have been removed.”. Then go back to  
Step 3.  
Mute  
The microphone can be muted during a  
call.  
1. Press the talk button with a short press.  
2. Say: [Beep] “Mute”  
3. Prompt:“Microphone muted”  
7. Prompt: “Dialing”  
NOTE  
The “Dial” command and a telephone  
number can be combined.  
Ex. In Step 2, say, “Dial 123-4567” then,  
Steps 3 and 4 can be skipped.  
Canceling mute  
1. Press the talk button with a short press.  
2. Say: [Beep] “Mute off”  
3. Prompt:“Microphone unmuted”  
5
–103  
Interior Features  
Bluetooth®  
Switching calls  
Transferring a Call from Hands-  
Free to a Device (Mobile Phone)  
Switching back to the previous call can  
also be done.  
Communication between the hands-free  
unit and a device (Mobile phone) is  
canceled, and the line can be switched  
to a standard call using a device (Mobile  
phone).  
Method 1  
1. Press the pick-up button.  
2. Prompt: “Swapping calls.”  
1. Press the talk button with a short press.  
2. Say: [Beep] “Transfer call”  
3. Prompt:“Transferred call to phone”  
Method 2  
1. Press the talk button with a short press.  
2. Say: [Beep] “Swap calls”  
3. Prompt: “Swapping calls.”  
Transferring a Call from a Device  
(Mobile Phone) to Hands-Free  
Three-way call function  
Communication between devices (Mobile  
phone) can be switched to Bluetooth®  
Hands-Free.  
1. Press the talk button with a short press.  
2. Say: [Beep] “Join calls”  
3. Prompt: “Joining calls”  
1. Press the talk button with a short press.  
2. Say: [Beep] “Transfer call”  
3. Prompt:“Transferred call to Hands  
Free system”  
Making a call using a telephone number  
1. Press the talk button with a short press.  
2. Say: [Beep] “Dial”  
3. Prompt: “Number, please”  
4. Say: [Beep] “XXXXXXXXXXX  
(Telephone number)”  
5. Prompt: “XXXXXXXXXXX.  
(Telephone number) After the beep,  
continue to add numbers, or say  
Go-Back to re-enter the last entered  
numbers, or press the Pick-Up button to  
execute dialing.”  
Call interrupt  
A call can be interrupted to receive an  
incoming call from a third party.  
Switch to a new incoming call using the  
following methods.  
Method 1  
1. Press the pick-up button.  
2. Prompt: “Swapping calls.”  
6. (Dialing)  
Press the pick-up button or say “Dial”,  
then go to Step 7.  
(Adding/inputting telephone  
number)  
Say, “XXXX” (desired telephone  
number), then go to Step 5.  
(Telephone number correction)  
Say, “Go Back”. The prompt replies,  
“Go Back. The last entered numbers  
have been removed.”. Then go back to  
Step 3.  
Method 2  
1. Press the talk button with a short press.  
2. Say: [Beep] “Swap calls”  
3. Prompt: “Swapping calls.”  
NOTE  
ꢀyꢀTo refuse an incoming call, press the  
hang-up button.  
ꢀyꢀAfter receiving a new incoming call, the  
previous call is placed on hold.  
7. Prompt: “Dialing”  
5
–104  
Interior Features  
Bluetooth®  
Bluetooth® Hands-Free  
(Type B)*  
Making calls using the phonebook  
1. Press the talk button with a short press.  
2. Say: [Beep] “Call”  
3. Prompt: “Name please.”  
4. Say: [Beep] “XXXXX... (Ex. “John's  
phone”)” (Say a voice tag registered in  
the phonebook.)  
Making a Call  
Phonebook Usage  
5. Prompt: “Calling XXXXX... (Ex.  
“John's phone”) XXXX (Ex. “at  
home”). Is this correct?” (Voice tag and  
phone number location registered in  
phonebook).  
Telephone calls can be made by saying  
the contact name in the downloaded  
phonebook or the name of a person whose  
phone number has been registered in the  
Bluetooth® Hands-Free. Refer to Import  
contact (Download Phonebook).  
6. Say: [Beep] “Yes”  
7. Prompt: “Dialing”  
1. Press the talk button.  
2. Wait for the beep sound.  
3. Say: “Call XXXXX... (Ex. “John”)  
Mobile”.  
4. Follow the voice guidance to place the  
call.  
Redialing function  
1. Press the talk button with a short press.  
2. Say: [Beep] “Redial”  
3. Prompt: “Dialing”  
Ending the current call  
Screen operation  
Press the hang-up button during the call.  
1. Select the icon on the home screen  
and display the Communication screen.  
DTMF (Dual Tone Multi-  
Frequency Signal) Transmission  
2. Select  
list.  
to display the contact  
This function is used when transmitting  
DTMF via the user's voice. The receiver  
of a DTMF transmission is generally a  
home telephone answering machine or  
a company's automated guidance call  
center (When you send tone signals  
back according to the voice guidance  
recording).  
3. Select the contact you would like  
to call to display the details for the  
contact.  
4. Select the desired phone number to  
make the call.  
Import contact (Download Phonebook)  
Phonebook data from your device (Mobile  
phone) can be sent and registered to your  
Bluetooth® Hands-Free phonebook using  
Bluetooth®.  
1. Press the talk button with a short press.  
2. Say: [Beep] “XXXX... send” (Say  
DTMF code)  
3. Prompt:“Sending XXXX... (DTMF  
code)”  
*Some models.  
5
–105  
Interior Features  
Bluetooth®  
(Automatic downloading)  
Favorites Contacts  
The “Auto Download Contacts”  
setting must be on. When hands-free is  
connected to the device, the phonebook is  
downloaded automatically.  
Refer to Communication Settings on page  
5-114.  
A maximum of 50 contacts can be  
registered. It will take less time to make a  
call after registering the telephone number.  
In addition, you do not have to look for the  
person you want to call in the phonebook.  
Registering to your favorites  
(Manually downloading)  
1. Select the icon on the home screen  
and display the Communication screen.  
If the “Auto Download Contacts” setting  
is off, download the phonebook using the  
following procedure.  
2. Select  
list.  
to display the favorites  
3. Select  
4. Select  
.
1. Select the icon on the home screen  
and display the Communication screen.  
or  
.
2. Select  
list.  
to display the contact  
5. Select from the displayed list.  
3. Select  
4. Select  
.
NOTE  
or  
to switch to the  
When “Add New Contact” is selected,  
information such as the selected person’s  
name is also registered. In addition, when  
“Add New Contact Details” is selected,  
only the telephone number of the selected  
person is registered.  
device operation.  
5. If  
is selected, select  
.
6. Download will be started from the  
mobile phone.  
Making a call from your favorites  
NOTE  
ꢀyꢀIf the phonebook has been already  
registered to the hands-free unit, the  
current phonebook is overwritten during  
“Import All Contacts”.  
1. Select the icon on the home screen  
and display the Communication screen.  
2. Select  
list.  
to display the favorites  
ꢀyꢀA maximum of 1000 contacts can be  
registered to the phonebook.  
3. (Only one phone number is  
registered to contact)  
ꢀyꢀPhonebook, incoming/outgoing call  
record, and favorite memories are  
exclusive to each mobile phone to  
protect privacy.  
Select the contact information you  
would like to call. Go to Step 5.  
(Multiple phone numbers are  
registered to contact)  
Select the contact you would like to  
call to display the screen indicating the  
details for the contact. Go to Step 4.  
5
–106  
Interior Features  
Bluetooth®  
NOTE  
4. Select the phone number you would  
like to call.  
If the contact is long-pressed when the  
favorites list is displayed, the contact  
information can be edited (deleted,  
moved).  
5. Select  
.
Deleting from your favorites  
1. Select the icon on the home screen  
and display the Communication screen.  
Telephone Number Input  
2. Select  
list.  
3. Select  
4. Select  
to display the favorites  
NOTE  
Practice this while parked until you are  
confident you can do it while driving in a  
non-taxing road situation. If you are not  
completely comfortable, make all calls  
from a safe parking position, and only  
start driving when you can devote your full  
attention to driving.  
.
.
5. Select the contact information which  
you would like to delete.  
6. Select  
.
Changing the display order of your  
favorites list  
1. Select the icon on the home screen  
and display the Communication screen.  
2. When  
is displayed.  
3. Input the telephone number using the  
dial pad.  
4. Select to make the call.  
1. Select the icon on the home screen  
and display the Communication screen.  
2. Select  
list.  
3. Select  
4. Select  
is pressed, the dial pad  
to display the favorites  
.
.
5. The contact can be moved after it is  
selected.  
Numeral or symbol entry  
6. Move the contact and select  
.
Use the dial pad.  
Long-press the  
to input +.  
to delete the currently input  
Select  
value.  
Long-press  
Changing contact name of your  
favorites  
to delete all input values.  
1. Select the icon on the home screen  
and display the Communication screen.  
Redial Function  
2. Select  
list.  
3. Select  
4. Select  
to display the favorites  
Makes a call to the last person called  
(latest person on outgoing call record)  
from the mobile phone/vehicle.  
.
.
1. Press the talk button.  
2. Wait for the beep sound.  
3. Say: “Redial”  
5. Select the contact to display the  
keyboard screen.  
6. If a new name is input and  
selected, the contact name is stored.  
is  
5
–107  
Interior Features  
Bluetooth®  
Call back Function  
1. If the vehicle is involved in a moderate  
to severe collision, notification of the  
call to 911 is made via audio and screen  
display. To cancel the call, press  
or hang-up  
Makes a call to the last person who called  
your (latest person on incoming call  
record) mobile phone/vehicle.  
1. Press the talk button.  
2. Wait for the beep sound.  
3. Say: “Call back”  
button within 10 seconds.  
2. If  
up button is not pressed within 10  
or hang-  
seconds, the call is made to 911  
automatically.  
Mobile 911 (U.S.A./Canada only)  
If the vehicle is involved in a moderate  
to severe collision, a call is made  
automatically to 911 from the connected  
device. The “Emergency Assistance Call”  
setting must be on.  
Refer to Communication Settings on page  
5-114.  
CAUTION  
Though the system can be set to  
not call 911, doing so will defeat  
the purpose of the system. Mazda  
recommends that the Mobile 911  
system remain activated.  
NOTE  
ꢀyꢀMobile 911 is a secondary function  
of the audio entertainment system.  
Therefore, the mobile 911 function  
does not assure that the call is always  
made to 911 after an accident occurs.  
ꢀyꢀA Hands-free device must be paired and  
connected. The 911 operator can verify  
the vehicle's position information using  
the Hands-free device GPS if equipped.  
ꢀ The 911 operator can verify the  
vehicle’s position information.  
5
–108  
Interior Features  
Bluetooth®  
Receiving an Incoming Call  
When an incoming call is received, the incoming call notification screen is displayed. The  
“Incoming Call Notifications” setting must be on.  
Refer to Communication Settings on page 5-114.  
To accept the call, press the pick-up button on the audio control switch or select  
the screen.  
on  
To reject the call, press the hang-up button on the audio control switch or select  
screen.  
on the  
The following icons are displayed on the screen during a call. Icons which can be used differ  
depending on use conditions.  
Icon  
Function  
Displays the Communication menu.  
Ends the call.  
Transferring a call from hands-free to a mobile phone  
Communication between the hands-free unit and a device (Mobile phone) is canceled, and  
the line can be switched to the device (Mobile phone) as a standard call.  
Transferring a call from a device (mobile phone) to hands-free  
Communication between devices (mobile phone) can be switched to Bluetooth® Hands-  
Free.  
Mute  
The microphone can be muted during a call.  
When selected again, the mute is canceled.  
A call is made to other person during a call and a 3-way call can be made. Select the contact  
from the following to make a call.  
: Call History is displayed.  
: The phonebook is displayed.  
: The dial pad is displayed. Input the phone number.  
The device may be unusable depending on the contractual content.  
The call on hold is made to make a 3-way call.  
The device may be unusable depending on the contractual content.  
Switches the call on hold.  
DTMF (Dual Tone Multi-Frequency Signal) Transmission  
This function is used when transmitting DTMF via the dial pad. The receiver of a DTMF  
transmission is generally a home telephone answering machine or a company's automated  
guidance call center.  
Input the number using a dial pad.  
5
–109  
Interior Features  
Bluetooth®  
NOTE  
ꢀyꢀIf the ignition is switched off during a  
hands-free call, the line is transferred  
to the device (Mobile phone)  
automatically.  
ꢀyꢀIf the DTMF code has two or more  
digits or symbols, each one must be  
transmitted individually.  
Call Interrupt  
A call can be interrupted to receive an  
incoming call from a third party.  
When  
is selected or the pick-  
up button on the steering wheel is pressed,  
the current call is held and the system  
switches to the new incoming call.  
When  
is selected, the current  
call is ended and the system switches to  
the new incoming call (GSM network  
only).  
When  
is selected or the hang-up  
button on the steering wheel is pressed, an  
incoming call is refused.  
NOTE  
ꢀyꢀThe function may not be available  
depending on the contractual content of  
the mobile device.  
ꢀyꢀThe function may not be operable  
depending on the type of the telephone  
network and the mobile device.  
5
–110  
Interior Features  
Bluetooth®  
Receiving and Replying to Messages (available only with Email/SMS  
compatible phones)  
NOTE  
SMS (Short Message Service) messages,  
and E-mail received by connected devices  
can be downloaded, displayed, and played  
(read by the system).  
Additionally, replies can also be made  
to calls and messages in the received  
messages.  
ꢀyꢀAttached data is not downloaded.  
ꢀyꢀMessages up to 1 kilobyte (e-mail)/140-  
bytes (SMS) can be downloaded.  
ꢀyꢀA message list is created for each  
device.  
ꢀyꢀIf the connected device does not  
correspond to MAP 1.0, the AT  
command is used to download. The  
downloaded message indicates that it is  
already read.  
Downloading messages  
Up to 20 new messages can be  
downloaded and displayed from a  
connected device.  
ꢀyꢀDownloading using the AT command  
may not function depending on the  
connected device.  
NOTE  
For e-mail, 20 messages for each account  
can be downloaded.  
Receiving messages  
(Automatic downloading)  
(Method 1)  
The “Auto Download Email” (E-mail)  
or “Auto Download Text Message”  
(SMS) setting must be on. A message  
is downloaded automatically when the  
Bluetooth® unit is connected to the device.  
Refer to Communication Settings on page  
5-114.  
When a device receives a message, a  
message received notification is displayed.  
The “Email Notifications” (E-mail) or  
“Text Notifications” (SMS) setting must  
be on.  
Refer to Communication Settings on page  
5-114.  
Select  
and display the message.  
(Manually downloading)  
(Method 2)  
When the “Auto Download Email”  
(E-mail) or “Auto Download Text  
Message” (SMS) setting is off, the  
message is downloaded using the  
following procedure.  
1. Select the icon on the home screen  
and display the Communication screen.  
2. Select  
message list for e-mail and SMS.  
3. Select the message you would like to  
display.  
and display the new  
1. Select the icon on the home screen  
and display the Communication screen.  
2. Select  
the Inbox.  
3. Select  
or  
to display  
.
4. Download will be started from the  
mobile phone.  
5
–111  
Interior Features  
Bluetooth®  
The following icons are displayed in the lower part of the details on the message. Icons  
which can be used differ depending on use conditions.  
Icon  
Function  
Displays the Communication menu.  
Displays the inbox.  
Plays back a message.  
When selected again, playback is temporarily stopped.  
Displays the previous message.  
Displays the next message.  
Only replies to the sender of the currently displayed message.  
Select the sentence on the displayed reply screen and select the sentence for sending from  
the preset message.  
Select  
.
(Only E-mail)  
Replies to all members including CC.  
Select the sentence on the displayed reply screen and select the sentence for sending from  
the preset message.  
Select  
.
Makes a call to a person who sent a message.  
For E-mail, this function may not work depending on the device.  
Deletes a message.  
The messages stored in a device is also deleted.  
NOTE  
Up to three preset messages can be selected.  
5
–112  
Interior Features  
Bluetooth®  
NOTE  
Example of use (verify unread E-mail)  
ꢀyꢀSelect the icon to change the  
language.  
1. Select the icon on the home screen  
and display the Communication screen.  
ꢀyꢀSelect the icon to switch between  
capitalized and lower-case characters.  
ꢀyꢀSelect the icon to return to the  
previous screen without storing the edit.  
2. Select  
to display the inbox.  
3. Select the unread message displayed in  
bold.  
4. The details of the message are  
displayed and replying to the message,  
making a call, or playback can be  
performed.  
Changing account for displaying  
(E-mail only)  
1. Select  
.
2. Select the account which you would  
like to display. Only the messages for  
the selected account are displayed in  
the inbox.  
Editing preset messages  
1. Select the icon on the home screen  
and display the Communication screen.  
2. Select  
3. Select  
.
.
4. Select the preset message which you  
would like to edit. The keyboard screen  
is displayed.  
5. When the message is input and is  
selected, the message is stored as a  
preset message.  
5
–113  
Interior Features  
Bluetooth®  
Communication Settings  
Select the icon on the home screen and display the Communication screen.  
Select  
to change the setting.  
Item  
Setting  
Function  
Go to Bluetooth® setting menu.  
Refer to Bluetooth® Preparation (Type B) on page 5-94.  
Bluetooth®  
—
Incoming Call  
Notifications  
On/Off  
Notifies when an incoming call is received.  
Auto Download Text  
Message  
Downloads SMS automatically when the Bluetooth® unit is connected  
to the device.  
On/Off  
On/Off  
On/Off  
On/Off  
On/Off  
Text Notifications  
Notifies when a new SMS is received.  
Auto Download  
Email*1  
Downloads E-mail automatically when the Bluetooth® unit is connected  
to the device.  
Email Notifications  
Notifies when a new Email is received.  
Auto Download Call  
History  
Downloads Call History automatically when the Bluetooth® unit is  
connected to the device.  
Auto Download  
Contacts*1  
Downloads the phonebook automatically when the Bluetooth® unit is  
connected to the device.  
On/Off  
Ringtone  
Car/Phone/Off Changes the ringtone setting.  
Adjusts using  
Phone Volume  
Adjusts the conversation volume.  
the slider.  
Adjusts using  
the slider.  
VR and Ringtone  
Adjusts the voice guidance and ringtone volume.  
First Name,  
Last Name  
Displays the contact information in alphabetical order of the first name.  
Displays the contact information in alphabetical order of the last name.  
Contacts Display  
Order  
Last Name,  
First Name  
Edits the preset message.  
Refer to Receiving and Replying to Messages (available only with  
E-mail/SMS compatible phones) on page 5-111.  
Edit Preset Messages  
—
Emergency Assistance  
Call  
On/Off  
—
Mobile Utilizes the Mobile 911 function.  
Initializes all Communication Settings.  
Restore Factory  
settings  
*1 Depending on the device, it may be necessary to acquire download permission on the device side.  
5
–114  
Interior Features  
Bluetooth®  
Bluetooth® Audio (Type A)*  
Applicable Bluetooth® specification  
(Recommended)  
Ver. 2.0  
NOTE  
ꢀyꢀThe battery consumption of Bluetooth®  
audio devices increases while  
Bluetooth® is connected.  
ꢀyꢀIf a general mobile phone device is  
USB connected during music playback  
over the Bluetooth® connection, the  
Bluetooth® connection is disconnected.  
For this reason, you cannot have music  
playback over a Bluetooth® connection  
and music playback using a USB  
connection at the same time.  
Response profile  
ꢀyꢀ  
A2DP (Advanced Audio Distribution  
Profile) Ver. 1.0/1.2  
ꢀyꢀ  
AVRCP (Audio/Video Remote Control  
Profile) Ver. 1.0/1.3  
ꢀyꢀThe system may not operate normally  
depending on the Bluetooth® audio  
device.  
A2DP is a profile which transmits only  
audio to the Bluetooth® unit. If your  
Bluetooth® audio device corresponds  
only to A2DP, but not AVRCP, you  
cannot operate it using the control panel  
of the vehicle's audio system. In this  
case, only the operations on the mobile  
device are available the same as when a  
portable audio device for a non-compliant  
Bluetooth® device is connected to the  
AUX terminal.  
How to Use the Bluetooth® Audio  
System  
Switching to Bluetooth® audio mode  
To listen to music or voice audio recorded  
to a Bluetooth® audio device, switch to  
the Bluetooth® audio mode to operate  
the audio device using the audio system  
control panel. Any Bluetooth® audio  
device must be paired to the vehicle's  
Bluetooth® unit before it can be used.  
Refer to Bluetooth® Preparation (Type A)  
on page 5-80.  
AVRCP  
Function  
Playback  
A2DP  
Ver. 1.0 Ver. 1.3  
—
—
—
—
—
—
X
X
X
X
X
X
X
X
Pause  
File (Track) up/down  
Reverse  
X
1. Turn on the Bluetooth® audio device's  
power.  
—
—
—
Fast-forward  
Text display  
2. Switch the ignition to ACC or ON.  
Make sure that the “ ” symbol is  
displayed in the audio display. The  
symbol is not displayed if an un-paired  
Bluetooth® audio device is being used  
or the vehicle's Bluetooth® unit has a  
malfunction.  
X: Available  
—: Not available  
NOTE  
Some Bluetooth® audio devices need a  
certain amount of time before the “ ”  
symbol is displayed.  
*Some models.  
5
–115  
Interior Features  
Bluetooth®  
3. Press the media button (  
) to  
Fast-forward/Reverse (AVRCP Ver. 1.3)  
switch to the Bluetooth® audio mode  
and start playback.  
Fast-forward  
Press and hold the fast-forward button  
).  
If the current device version is lower  
than AVRCP Ver. 1.3: “BT Audio” is  
displayed.  
If the current device is AVRCP Ver. 1.3:  
The playback time is displayed.  
(
Reverse  
Press and hold the reverse down button  
(
).  
NOTE  
Switching the display (only AVRCP Ver.  
1.3)  
ꢀyꢀIf the Bluetooth® audio device does not  
begin playback, press the Play/Pause  
button (4).  
ꢀyꢀIf a call is received on a hands-free  
mobile phone during playback from the  
Bluetooth® audio device, the playback is  
stopped. Playback from the Bluetooth®  
audio device resumes after the call  
ends.  
For files with a song title and other  
information that have been input, the  
display switches between display of the  
song title and other information each  
time the text button (3) is pressed during  
playback.  
Playback  
1. To listen to a Bluetooth® audio device  
over the vehicle's speaker system,  
switch the mode to Bluetooth®  
audio mode. (Refer to “Switching to  
Bluetooth® audio mode”)  
Playback time  
Album title  
Song title  
2. To stop playback, press the Play/Pause  
button (4).  
Artist name  
3. Press the button again to resume  
playback.  
NOTE  
Selecting a file (track)  
ꢀyꢀIf title information is not available, “NO  
TITLE” is displayed.  
Selects the next file (track)  
ꢀyꢀThis unit cannot display some  
characters. Characters which cannot be  
displayed are indicated by an asterisk  
( ).  
Short-press the track up button (  
).  
Selects the beginning of the current file  
(track)  
Short-press the track down button (  
).  
5
–116  
Interior Features  
Bluetooth®  
Bluetooth® Audio (Type B)*  
Display scroll  
Only 13 characters can be displayed at one  
time. To display the rest of the characters  
of a long title, press and hold the text  
button (3). The display scrolls the next 13  
characters. Press and hold the text button  
(3) again after the last 13 characters have  
been displayed to return to the beginning  
of the title.  
Applicable Bluetooth® specification  
(Recommended)  
Ver. 1.1/1.2/2.0 EDR/2.1 EDR/3.0  
(conformity)  
Response profile  
ꢀyꢀ  
A2DP (Advanced Audio Distribution  
Profile) Ver. 1.0/1.2  
ꢀyꢀ  
AVRCP (Audio/Video Remote Control  
Profile) Ver. 1.0/1.3/1.4  
Bluetooth® Audio Device  
Information Display  
If a Bluetooth® audio device is connected,  
the following information is displayed in  
the audio display.  
AVRCP Ver. AVRCP  
lower than 1.3 Ver. 1.3  
Device name  
Title  
X
X
X
X
X
X
X
—
—
—
—
—
—
—
Artist name  
Album name  
File number  
Playback time  
Folder number  
X: Available  
—: Not available  
NOTE  
Some information may not display  
depending on the device, and if the  
information cannot be displayed, “NO  
TITLE” is indicated.  
*Some models.  
5
–117  
Interior Features  
Bluetooth®  
NOTE  
ꢀyꢀThe battery consumption of Bluetooth®  
audio devices increases while  
A2DP is a profile which transmits only  
audio to the Bluetooth® unit. If your  
Bluetooth® audio device corresponds  
only to A2DP, but not AVRCP, you  
cannot operate it using the control panel  
of the vehicle's audio system. In this  
case, only the operations on the mobile  
device are available the same as when a  
portable audio device for a non-compliant  
Bluetooth® device is connected to the  
AUX terminal.  
Bluetooth® is connected.  
ꢀyꢀIf a general mobile phone device is  
USB connected during music playback  
over the Bluetooth® connection, the  
Bluetooth® connection is disconnected.  
For this reason, you cannot have music  
playback over a Bluetooth® connection  
and music playback using a USB  
connection at the same time.  
ꢀyꢀThe system may not operate normally  
depending on the Bluetooth® audio  
device.  
AVRCP  
Function  
A2DP  
Ver. 1.0 Ver. 1.3 Ver. 1.4  
Playback  
Pause  
X
X
X
X
X
X
X
X
File (Track)  
up/down  
—
X
X
X
Reverse  
—
—
—
—
—
—
X
X
X
X
X
X
Fast-forward  
Text display  
Depends Depends  
Repeat  
Shuffle  
Scan  
—
—
—
—
—
—
—
—
on  
device  
on  
device  
Depends Depends  
on  
device  
on  
device  
Depends Depends  
on  
device  
on  
device  
Depends  
on  
device  
Folder up/  
down  
—
X: Available  
—: Not available  
5
–118  
Interior Features  
Bluetooth®  
How to Use the Bluetooth® Audio System  
Switching to Bluetooth® audio mode  
To listen to music or voice audio recorded to a Bluetooth® audio device, switch to the  
Bluetooth® audio mode to operate the audio device using the audio system control panel.  
Any Bluetooth® audio device must be paired to the vehicle's Bluetooth® unit before it can be  
used.  
Refer to Bluetooth® Preparation (Type B) on page 5-94.  
1. Turn on the Bluetooth® audio device's power.  
2. Switch the ignition to ACC or ON.  
3. Select the icon on the home screen and display the Entertainment screen.  
4. When Bluetooth® is selected, switches to the Bluetooth® audio mode to begin playback.  
NOTE  
ꢀyꢀIf Bluetooth® audio is used after using Pandora®, Aha™ or Stitcher™ radio, the  
application on the mobile device has to be closed first.  
ꢀyꢀIf the Bluetooth® audio device does not begin playback, select the  
icon.  
ꢀyꢀIf the mode is switched from Bluetooth® audio mode to another mode (radio mode), audio  
playback from the Bluetooth® audio device stops.  
Playback  
To listen to a Bluetooth® audio device over the vehicle's speaker system, switch the mode to  
Bluetooth® audio mode. (Refer to “Switching to Bluetooth® audio mode”)  
After switching to the Bluetooth® audio mode, the following icons are displayed in the  
lower part of the display. Icons which can be used differ depending on the version of the  
Bluetooth® audio device which you are currently using.  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
(AVRCP Ver. 1.4 only)  
Displays the top level folder/file list.  
Select the folder which you want to select.  
The files in the selected folder are displayed.  
Select the file you want to play.  
(AVRCP Ver. 1.3 or higher)  
Replays the song currently being played repeatedly.  
When selected again, the songs in the folder are played repeatedly.  
Select it again to cancel.  
Icons change when the song is repeated or the folder is repeated.  
(AVRCP Ver. 1.3 or higher)  
Plays songs in the folder in random order.  
When selected again, the songs on the device are played in random order.  
Select it again to cancel.  
Icons change during folder shuffle or device shuffle.  
5
–119  
Interior Features  
Bluetooth®  
Icon  
Function  
Scans the titles in a folder and plays the beginning of each song to aid in finding a desired  
song.  
When selected again, the beginning of each song on the device is played.  
When selected again, the operation is canceled and the song currently being played  
continues.  
Returns to the beginning of the previous song.  
Long-press to fast reverse. It stops when you remove your hand from the icon or the  
commander knob.  
Plays the Bluetooth® audio. When selected again, playback is temporarily stopped.  
Advances to the beginning of the next song.  
Long-press to fast forward. It stops when you remove your hand from the icon or the  
commander knob.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-42.  
5
–120  
Interior Features  
Bluetooth®  
Bluetooth® Audio Device  
Information Display  
Example of use (When searching for a  
song from the top level of a device)  
1. Select the icon and display the  
folder/file list at the top level.  
If a Bluetooth® audio device is connected,  
the following information is displayed in  
the center display.  
AVRCP  
Ver. lower  
than 1.3  
AVRCP  
Ver. 1.4 or  
higher  
AVRCP  
Ver. 1.3  
Device name  
X
X
X
X
Remaining  
battery  
charge of  
device  
X
X
Song name  
Artist name  
Album name  
—
—
—
X
X
X
X
X
X
2. When the folder is selected, folders/file  
lists in the folder are displayed.  
When the playlist is selected, the file  
list is displayed.  
Playback  
time  
—
—
—
X
X
X
X
3. Select the desired song.  
Genre name  
Album art  
image  
NOTE  
—
—
Select to move to a folder one level  
higher.  
X: Available  
—: Not available  
NOTE  
Some information may not display  
depending on the device, and if the  
information cannot be displayed,  
“Unknown - - -” is indicated.  
5
–121  
Interior Features  
Bluetooth®  
How to Use Pandora®*  
What is Pandora®?  
Pandora® is free personalized Internet radio. Simply enter a favorite artist, track, genre,  
and Pandora® will create a personalized station that plays their music and more like it.  
Rate songs by giving thumbs-up and thumbs-down feedback to further refine your station,  
discover new music and help Pandora® play only music you like.  
®
®
®
ꢀ*ꢀ  
Pandora , the Pandora logo, and the Pandora trade dress are trademarks or registered  
trademarks of Pandora Media, Inc., used with permission.  
NOTE  
To operate Pandora® from your Bluetooth® device, perform the following in advance:  
ꢀyꢀCreate Pandora® account on the Web.  
ꢀyꢀCreate Pandora® station using Pandora® application.  
ꢀyꢀInstall Pandora® application on your device.  
Playback  
Select the icon on the home screen and display the Entertainment screen. When  
selected, the following icons are indicated in the bottom part of the center display.  
is  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Displays the station list.  
Use to switch to other stations.  
Thumbs-Down  
Press the icon to tell Pandora® not to play this track.  
Thumbs-Up  
Press the icon to tell Pandora® “you like this track” and it helps to bring in more tracks  
like it to your station.  
Bookmarking  
Bookmarks the song or artist currently being played.  
Plays the track. When selected again, playback is temporarily stopped.  
Goes to the next song.  
*Some models.  
5
–122  
Interior Features  
Bluetooth®  
Icon  
Function  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-42.  
NOTE  
Bookmarking  
ꢀyꢀThe skip function may not be available  
depending on the device.  
ꢀyꢀThe number of skips is limited by  
Pandora®.  
ꢀyꢀIf the icon is selected when the skip  
song function is running, the next song  
is skipped.  
You can bookmark song or artist to check  
out later on the Web.  
1. Select the icon.  
2. Select  
song.  
to bookmark the  
to bookmark the  
3. Select  
artist.  
Selection from station list  
Selection can be made from a programmed  
radio station list.  
1. Select the icon.  
2. Select the desired radio station.  
NOTE  
When  
is selected, songs randomly  
selected from the radio station list are  
played.  
Selecting the sort method  
The displayed order of the station list can  
be changed.  
1. Select the  
2. Select  
3. Select  
icon.  
.
to display in the order  
starting from the newly created station.  
4. Select to display in alphabetical  
order.  
NOTE  
The displayed order of  
changed.  
cannot be  
5
–123  
Interior Features  
Bluetooth®  
How to Use Aha™*  
Aha is an application which can be used to enjoy various Internet content such as Internet  
radio and podcasts.  
Stay connected to your friends activities by getting updates from Facebook and Twitter.  
Using the location-based service, nearby services and destinations can be searched or real-  
time local information can be obtained.  
For details on Aha, refer to “http://www.aharadio.com/”.  
ꢀ*ꢀ  
Aha, the Aha logo, and the Aha trade dress are trademarks or registered trademarks of  
Harman International Industries, Inc., used with permission.  
NOTE  
ꢀyꢀThe service content provided by Aha varies depending on the country in which the user  
resides. In addition, the service is not available in some countries.  
ꢀyꢀTo operate Aha from your Bluetooth® device, perform the following in advance:  
ꢀyꢀInstall the Aha application to your device.  
ꢀyꢀCreate an Aha account for your device.  
ꢀyꢀLog onto Aha using your device.  
ꢀyꢀSelect the preset station on your device.  
Playback  
Select the icon on the home screen and display the Entertainment screen. When  
is  
selected, the following icons are displayed at the bottom of the center display. The displayed  
icon differs depending on the selected station.  
In addition, icons other than the following icons may be displayed.  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Displays the main menu.  
Use to switch to other stations.  
Displays the content list.  
Use to switch to other desired content on the station.  
Shout  
Records voice.  
Records voice and posts it as playable audio to Facebook and other social stations.  
Like*1  
Evaluates the current content as “Like”.  
5
–124  
Interior Features  
Bluetooth®  
Icon  
Function  
Dislike*1  
Evaluates the current content as “Dislike”.  
Reverses for 15 seconds.  
Map (vehicles with navigation system)  
Displays the destination searched by the location based services on the navigation system.  
Call  
A call can be made to the telephone number of a shop searched using the Location Based  
Services. Available when a device is connected as a Hands-Free.  
Returns to the previous content.  
Pauses playback of the content. When selected again, playback resumes.  
Goes to the next content.  
Fast-forwards for 30 seconds.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-42.  
*1 Some stations may use alternate variations of Like and Dislike, based on station type or provider.  
Main menu  
Select the  
icon.  
5
–125  
Interior Features  
Bluetooth®  
Switch the tab and select the station category.  
Tab  
Function  
Displays the preset station list set on the device.  
Select the preset station name to play the station content.  
Presets  
Nearby  
Select the desired station.  
Guidance is provided to the searched destination near the vehicle's position.  
You can designate desired categories previously set using the filter setting  
on your device.  
NOTE  
The available Location Based Services may differ because the services depend on the  
content provided by Aha™.  
5
–126  
Interior Features  
Bluetooth®  
Example of use (Location Based  
Services)  
Shout  
Some social stations, such as Facebook or  
Caraoke, support the ability to record and  
share voice messages using the “Shout”  
function.  
1. Select the desired station from the  
Nearby tab on the main menu.  
The destination name or address  
playback starts in the order of the  
destination name list.  
1. Select the icon and start the  
countdown (3, 2, 1, 0). Recording starts  
when the countdown reaches zero.  
2. Records voice.  
3. Select  
recording.  
and store/post the  
NOTE  
ꢀyꢀRecordable time varies depending on  
the station (Max. 30 seconds).  
ꢀyꢀRecording stops automatically when the  
recordable time has elapsed. You can  
then post or delete the recording.  
2. When the icon is selected, the  
currently displayed destination is  
displayed on the navigation system  
(vehicles with navigation system).  
3. When the icon is selected, a phone  
call is placed to the currently displayed  
destination.  
4. Select the  
content list.  
icon and display the  
Selection of other destinations from the  
list can be made.  
5
–127  
Interior Features  
Bluetooth®  
How to Use Stitcher™* Radio  
What is Stitcher™ Radio?  
Stitcher™ Radio is an application for streaming Internet radio or podcasts on demand.  
Recommended content is automatically selected by registering content which you put into  
your favorites, or by pressing the Like or Dislike button.  
For details on Stitcher™ Radio, refer to “http://stitcher.com/”.  
ꢀ*ꢀ  
Stitcher™, the Stitcher™ logo, and the Stitcher™ trade dress are trademarks or registered  
trademarks of Stitcher, Inc., used with permission.  
NOTE  
To operate Stitcher™ Radio from your Bluetooth® device, perform the following in advance:  
ꢀyꢀInstall the Stitcher™ Radio application to your device.  
ꢀyꢀCreate a Stitcher™ Radio account for your device.  
ꢀyꢀLog onto Stitcher™ Radio using your device.  
Playback  
Select the Entertainment screen and display the icon on the home screen. When  
selected, the following icons are indicated in the bottom part of the center display.  
is  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Displays the station list.  
Use to switch to other stations.  
Dislike  
Evaluates the current program as “Dislike”.  
Like  
Evaluates the current program as “Like”.  
Adds the current station to your favorites or deletes the current station from your favorites.  
Reverses for 30 seconds.  
Plays the station. Select it again to pause playback.  
5
–128  
Interior Features  
Bluetooth®  
Icon  
Function  
Goes to the next station.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-42.  
Station list  
1. Select the  
icon and display the station list.  
Favorites station name: Select to display the program registered to your favorites.  
Category name: A recommended category selected from your favorites by Stitcher™  
is displayed.  
Select it to display the category program.  
2. Select the program name to play it.  
5
–129  
Interior Features  
Bluetooth®  
Add to your favorites  
If the current program has not been  
registered to your favorites, it can be  
registered to your favorites.  
1. Select the icon to display the  
favorites station which the registration  
can be added.  
2. Select the station name which you want  
to register.  
3. Select  
to add the program to the  
selected favorites station.  
NOTE  
ꢀyꢀMultiple favorites stations can be  
selected and registered.  
ꢀyꢀFavorites stations registered by  
oneself as well those set by default are  
displayed.  
Delete from your favorites  
If the current program has already been  
registered to your favorites, the program  
can be deleted from your favorites.  
1. Select the icon.  
2. The program is automatically deleted  
from the favorites station.  
5
–130  
Interior Features  
Bluetooth®  
Troubleshooting*  
Mazda Bluetooth® Hands-Free Customer Service  
If you have any problems with Bluetooth®, contact our toll-free customer service center.  
ꢀyꢀ  
U.S.A.  
ꢀPhone: 800-430-0153 (Toll-free)  
ꢀWeb: www.MazdaUSA.com/bluetooth  
ꢀyꢀ  
Canada  
ꢀPhone: 800-430-0153 (Toll-free)  
ꢀWeb: www.mazdahandsfree.ca  
ꢀyꢀ  
Mexico  
ꢀCenter of Attention to Client (CAC)  
ꢀPhone: 01-800-01-MAZDA (Toll-free)  
ꢀWeb: www.mazdamexico.com.mx  
Bluetooth® Device pairing, connection problems  
Symptom  
Cause  
Solution method  
First make sure the device is  
compatible with the Bluetooth®  
unit, and then check whether the  
Bluetooth® function and the Find  
Mode/Visible setting*1 on the device  
are turned on. If pairing is still  
not possible after this, contact an  
Authorized Mazda Dealer or Mazda  
Bluetooth® Hands-Free Customer  
Service.  
Unable to perform pairing  
—
Perform pairing using the following  
procedure.  
The pairing information paired to  
the Bluetooth® unit or device is not  
recognized correctly.  
Pairing cannot be performed again  
Unable to perform pairing  
y
Clear “Mazda” stored in the device.  
y
Perform pairing again.  
The Bluetooth® function and the  
Find Mode/Visible setting*1 on the  
device may turn off automatically  
after a period of time has elapsed  
depending on the device.  
Check whether the Bluetooth®  
function and the Find Mode/Visible  
setting*1 on the device are turned on  
and pairing or reconnect.  
Does not connect automatically  
when starting the engine  
Automatically connects, but then  
disconnects suddenly  
The device is in a location in which  
radio wave interference can occur  
easily, such as inside a bag in a rear which radio wave interference is less  
Move the device to a location in  
Disconnects intermittently  
seat, in a rear pocket of a pair of  
pants.  
likely to occur.  
Does not connect automatically  
when starting the engine  
The pairing information is updated  
when the device OS is updated.  
Perform pairing again.  
*1 Setting which detects the existence of a device external to the Bluetooth® unit  
*Some models.  
5
–131  
Interior Features  
Bluetooth®  
NOTE  
ꢀyꢀWhen you update the operating system of your mobile device the pairing information may  
be invalidated. Therefore, the device may need to be re-paired to the hands-free unit.  
ꢀyꢀIf you pair your phone which has already been paired to your vehicle more than once  
in the past, you need to delete “Mazda” on your mobile device. Then, execute the  
Bluetooth® search on your mobile device once again, and pair to a newly detected  
“Mazda”.  
ꢀyꢀBefore you pair your device, make sure that Bluetooth® is “ON”, both on your phone and  
on the vehicle.  
Voice recognition related problems  
Symptom  
Cause  
Solution method  
y
y
Poor voice recognition  
Excessive, slow speech.  
Excessive, forceful speech  
(shouting).  
Regarding the causes indicated  
on the left, be careful with how  
you speak. In addition, when  
y
y
y
y
Speaking before the beep sound  
has ended.  
Loud noise (speaking or noise from numbers are spoken in a sequence,  
False recognition of numbers  
outside/inside vehicle).  
Airflow from A/C is blowing  
against the microphone.  
Speaking in off-standard  
expressions (dialect).  
recognition ability will improve  
if no stop is placed between the  
numbers.  
A poor connection or malfunction  
with the microphone may have  
occurred. Consult an Authorized  
Mazda Dealer.  
There is a malfunction in the  
microphone.  
Poor voice recognition  
If there is any malfunction after  
checking the pairing situation, check  
for device pairing or connection  
problems.  
There is a problem with the  
connection between the Bluetooth®  
unit and the device.  
Phone-related voice recognition is  
disabled  
By carrying out the following  
measures, the rate of recognition  
will improve.  
y
Clear memory from the phonebook  
which is not used very often.  
The Bluetooth® system is under a  
condition in which recognition is  
difficult.  
Names in the phonebook are not  
easily recognized  
y
Avoid shortened names, use full  
names. (Recognition improves the  
longer the name is. By not using  
names such as “Mom”, “Dad”,  
recognition will improve.)  
When operating the audio, a song  
name is not recognized  
Song names cannot be recognized  
by voice.  
—
Guidance can be skipped by quickly  
pressing and releasing the Talk  
button.  
You want to skip guidance  
—
5
–132  
Interior Features  
Bluetooth®  
Regarding problems with calls  
Symptom  
Cause  
Solution method  
For about three seconds after  
starting a call, the Bluetooth®  
unit's Noise Suppression function  
requires time to adapt to the call  
environment.  
When starting a call, vehicle noise  
from the other party can be heard  
This does not indicate a problem  
with the device.  
The other party cannot be heard or  
the speaker's voice is quiet  
The volume is set at zero or low.  
Increase the volume.  
Other problems  
Symptom  
Cause  
Solution method  
The indication for the remaining  
battery is different between the  
vehicle and the device  
The indication method is different  
between the vehicle and the device.  
—
When a call is made from the  
vehicle, the telephone number is  
updated in the incoming/outgoing  
call record but the name does not  
appear  
If the number has been registered  
into the phonebook, the incoming/  
outgoing call record is updated by  
the name in the phonebook when the  
engine is restarted.  
The number has not been registered  
into the phonebook.  
The cell phone does not synchronize  
with the vehicle regarding the  
incoming/outgoing call record  
Some types of cell phones do not  
synchronize automatically.  
Operate the cell phone for  
synchronization.  
It takes a long time to complete the A maximum of 60 seconds is  
function for changing the language required.  
—
5
–133  

Related Topics

Interior Features
Climate Control System Audio System Interior Equipment

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot