Before Driving
Windows
Auto-opening/Closing
Jam-safe Window
▼
▼
To fully open the window
When the window is closing and a
foreign object is detected between the
window and the window frame, the
window stops closing and
automatically, press the switch
completely down, then release. The
window will fully open automatically.
To fully close the window
automatically opens partway.
automatically, pull the switch
completely up, then release. The
window will fully close automatically.
NOTE
The jam-safe function may operate
under the following conditions:
To stop the window partway, pull or
press the switch in the opposite
direction and then release it.
A strong impact is detected while
the window is closing.
The window is closing in very low
temperatures.
(A window cannot be closed)
NOTE
Power window system initialization
procedure
If the jam-safe function has operated
and the window cannot be closed,
check around the window frame for
a foreign object.
If there is no foreign object around
the window frame, forcibly close a
window using the following
procedure.
If you operate the switch any number
of times with the power window not
fully closed, the window may no longer
fully open/close automatically.
The power window auto function will
only resume on a power window that
has been reset.
1. After switching the ignition OFF,
wait for 45 seconds or longer.
2. Switch the ignition ON.
3. Operate the switch in the
direction to close the window
until the jam-safe function
operates and the window stops.
Repeat this operation a total of 5
times.
1. Switch the ignition ON.
2. Make sure that the power window
lock switch located on the driver's
door is not depressed.
3. Press the switch and fully open the
window.
4. Pull up the switch to fully close the
window and continue holding the
switch for about 2 seconds after the
window fully closed.
5. Make sure that the power windows
operate correctly using the door
switches.
4. Continue pulling up the switch to
fully close the window.
Remote Power Window Operation
▼
All power windows can be opened
from outside the vehicle after the
doors are closed.
The power windows can be operated
remotely when the power window lock
switch on the driver's door is in the
lock or unlocked position.
3-37