When Driving
Cruise Control
Cruise Set Indication (Green)
To Set Speed
▼
The indication turns on (green) when a
cruising speed has been set.
1. Activate the cruise control system
by pressing the cruise switch. The
cruise standby indication (white)
turns on.
2. Accelerate to the desired speed,
which must be more than 25 km/h
(16 mph).
3. Adjust the system to the desired
vehicle speed using the accelerator
pedal. Press the RES switch up (SET
+) or down (SET-) to start cruise
control. The cruise control
Activation/Deactivation
▼
WARNING
Always turn oꢀ the cruise control
system when it is not in use:
indication (green) in the instrument
cluster turns on at the same time.
Quickly release the switch when the
cruise control indication (green)
turns on.
Leaving the cruise control system in an
activation-ready state while the cruise
control is not in use is dangerous as the
cruise control could unexpectedly
activate if the activation button is
accidentally pressed, and result in loss
of vehicle control and an accident.
NOTE
If the RES switch is operated up (SET
+) or down (SET-) while the vehicle
speed is between 25 and 30 km/h
(16 to 19 mph), the set speed is set
to 30 km/h (19 mph).
If the headway control function is
disabled using a Mazda Connect
setting, the system switches to cruise
control.
The cruise control speed setting
cannot be performed under the
following conditions:
Activation
To activate the system, press the cruise
switch. The cruise standby indication
(white) turns on.
Any of the doors is opened.
The driver's seat belt is unfastened.
The brake pedal is depressed.
The parking brake is applied.
Deactivation
(Automatic transmission)
To deactivate the system, press the
cruise switch again.
The cruise standby indication (white)
turns oꢁ.
The selector lever is in the P, N, or
R position.
(Manual transmission)
The shift lever is in the neutral
position.
On a steep grade, the vehicle may
momentarily slow down while
ascending or speed up while
descending.
4-225
English 
