2013-2016 Mazda Cx-5 SUV Bluetooth? User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Bluetooth? for Your Mazda Cx-5 SUV First Generation (2013-2016)

Interior Features  
Bluetooth®  
Bluetooth®í  
Bluetooth® Hands-Free outline  
When a Bluetooth® device (mobile phone) is connected to the vehicle's Bluetooth® unit via  
radio wave transmission, a call can be made or received by pressing the talk button, pick-  
up button, or hang-up button on the audio remote control switch, or by operating the center  
display. For example, even if a device (mobile phone) is in your coat pocket, a call can be  
made without taking the device (mobile phone) out and operating it directly.  
Bluetooth® audio outline  
When a portable audio unit equipped with the Bluetooth® communication function is  
paired to the vehicle, you can listen to music stored on the paired portable audio device  
from the vehicle's speakers. It is not necessary to connect the portable audio device to the  
vehicle's external input terminal. After programming, operate the vehicle audio control  
panel to play/stop the audio.  
NOTE  
l
For your safety, a device can be paired only when the vehicle is parked. If the vehicle starts to  
move, the pairing procedure will end. Park the vehicle in a safe place before pairing.  
The communication range of a Bluetooth® equipped device is about 10 meters (32 ft) or less.  
l
Basic audio operation is available using voice commands even if Bluetooth® is not connected.  
l
l
For safety reasons, operation of the center display is disabled while the vehicle is being driven.  
However, items not displayed in gray can be operated using the commander switch while the  
vehicle is being driven.  
CAUTION  
Some Bluetooth® mobile devices are not compatible with the vehicle.  
Consult an Authorized Mazda Dealer, Mazda's call center or Web support center for  
information regarding Bluetooth® mobile device compatibility:  
Ø U.S.A.  
Phone:800-430-0153  
Web: www.mazdausa.com/mazdaconnect  
Ø Canada  
Phone:800-430-0153  
Web: www.mazdahandsfree.ca  
Ø Mexico  
Center of Attention to Client (CAC)  
Phone:01-800-01-MAZDA  
Web: www.mazdamexico.com.mx  
Applicable Bluetooth® specification (Recommended)  
Type A: Ver. 2.0  
Type B: Ver. 1.1/1.2/2.0 EDR/2.1 EDR/3.0 (conformity)  
íSome models.  
5-69  
Interior Features  
Bluetooth®  
qComponent Parts  
Audio unit  
Type A  
Type B  
Talk button, Pick-up button and Hang-up button  
Talk button  
Pick-up button  
Hang-up button  
Microphone  
Microphone  
Microphone (Hands-Free)  
The microphone is used for speaking voice commands or when making a Hands-Free call.  
Talk button, Pick-Up button and Hang-Up button (Hands-Free)  
The basic functions of Bluetooth® Hands-Free can be used for such things as making calls  
or hanging up using the talk, pick-up and hang-up buttons on the steering wheel.  
Commander switch (Type B)  
The commander switch is used for volume adjustment and display operation. Tilt or turn  
the commander knob to move the cursor. Press the commander knob to select the icon.  
Volume adjustment  
The power/volume dial of the audio unit*1 or the volume dial of the commander switch*2 is  
used to adjust the volume. Turn the dial to the right to increase volume, to the left to  
decrease it.  
The volume can also be adjusted using the volume button on the steering wheel.  
*1 Type A  
*2 Type B  
NOTE  
If the volume is lower compared to other audio modes, increase the volume from the device side.  
5-70  
Interior Features  
Bluetooth®  
(Type B)  
Conversation volume and the volume of the voice guidance and ringtone can each be set in  
advance.  
1. Select the  
2. Select  
icon on the home screen and display the Communication screen.  
.
3. Adjust the  
and the  
using the slider.  
11. Prompt: “YYYY is this correct?”  
12. Say:[Beep] “Yes” or “No”  
qBluetooth® Preparation (Type A)  
Bluetooth®Hands-Free Preparation  
Pairing code setting  
13. If “Yes”, go to Step 14. If “No”, the  
procedure returns to Step 9.  
The 4-digit pairing code setting for  
registration of your cell phone (pairing)  
can be set beforehand.  
14. Prompt: “Your new pairing code is  
YYYY. Use this pairing code when  
pairing devices to the Hands-Free  
system. Do you want to pair a device  
now?”  
NOTE  
The initial setting value is “0000”.  
1. Press the pick-up button or talk button  
with a short press.  
15. Say:[Beep] “Yes” or “No”  
16. If “Yes”, the system switches to the  
device registration mode. If “No”, the  
system returns to standby status.  
2. Say:[Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
Device pairing  
To use Bluetooth® Hands-Free, the device  
equipped with Bluetooth® has to be paired  
to the Bluetooth® unit using the following  
procedure.  
A maximum of seven devices including  
Hands-Free mobile phones and  
Bluetooth® audio devices can be paired to  
one vehicle.  
4. Say:[Beep] “Pairing options”  
5. Prompt:“Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code.”  
6. Say:[Beep] “Set pairing code”  
7. Prompt:“Your current pairing code is  
XXXX. Do you want to change it to a  
different pairing code?”  
NOTE  
If a Bluetooth®device has already been paired  
to the vehicle as a Bluetooth® audio device, it  
does not need to be paired again when using  
the device as a Hands-Free mobile phone.  
Conversely, it does not need to be paired again  
as a Bluetooth® audio device if it has already  
been paired as a Hands-Free mobile phone.  
8. Say:[Beep] “Yes”  
9. Prompt: “Please say a 4-digit pairing  
code.”  
10. Say: [Beep] “YYYY”  
5-71  
Interior Features  
Bluetooth®  
1. Activate the Bluetooth® application of  
the device.  
13. Say:[Beep] “XXXX - - -” (Say a  
“device tag”, an arbitrary name for  
the device.) Example: “Stan's device.”  
NOTE  
For the operation of the device, refer to its  
NOTE  
instruction manual.  
Say a paired “device tag” within 10 seconds.  
If more than two devices are to be paired, they  
cannot be paired with the same or similar  
“device tag”.  
2. Press the pick-up button or talk button  
with a short press.  
3. Say:[Beep] “Setup”  
14. Prompt:“XXXXXX - - - (Ex. “Stan's  
device”) (Device tag). Is this  
correct?”  
4. Prompt:“Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
15. Say: [Beep] “Yes”  
16. Prompt:“Pairing complete”  
5. Say:[Beep] “Pairing options”  
After a device is registered, the system  
automatically identifies the device. By  
activating Bluetooth® Hands-Free again,  
or by activating Bluetooth® Hands-Free  
first after switching the ignition from OFF  
to ACC, the system reads out a voice  
guidance, “XXXXXX - - - (Ex. “Stan's  
device”) (Device tag) is connected”.  
6. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code.”  
7. Say:[Beep] “Pair”  
8. Prompt: “Start the pairing process on  
your Bluetooth® device. Your pairing  
code is 0000 (XXXX). Input this on  
your Bluetooth® device when  
NOTE  
l
When the pairing is completed, the  
prompted on the device. See device  
manual for instructions.”  
symbol is displayed.  
Some Bluetooth® audio devices need a  
l
9. Using the device, perform a search for  
the Bluetooth® device (Peripheral  
device).  
certain amount of time before the symbol  
is displayed.  
l
Device registration can also be done by  
operating the audio unit.  
Depending on the device, the registration  
NOTE  
l
For the operation of the device, refer to its  
status may be lost after a certain period of  
time. If this occurs, repeat the entire  
process from Step 1.  
instruction manual.  
10. Select “Mazda” from the device list  
searched by the device.  
Registered device read-out  
Bluetooth® Hands-Free can read-out the  
devices registered to its system.  
11. Input the 4-digit pairing code to the  
device.  
12. Prompt:“Please say the name of the  
device after the beep.”  
5-72  
Interior Features  
Bluetooth®  
l
NOTE  
“Previous”: Returns to the previous  
device in read-out when the talk  
button is short-pressed.  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
8. Prompt:“End of list, would you like to  
start from the beginning?”  
1. Press the pick-up button or talk button  
with a short press.  
9. Say: [Beep] “No”  
2. Say:[Beep] “Setup”  
10. Prompt: “Returning to main menu.”  
Device selection  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
If several devices have been paired, the  
Bluetooth® unit links the device last  
paired. If you would like to link a  
different paired device, it is necessary to  
change the link. The order of device  
priority after the link has been changed is  
maintained even when the ignition is  
switched off.  
4. Say:[Beep] “Pairing options”  
5. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code”  
6. Say:[Beep] “List”  
(Hands-Free phone)  
7. Prompt: “XXXXX..., XXXXX...,  
XXXXX... (Ex. Device A, device B,  
device C)” (The voice guidance reads  
out the device tags registered to the  
Hands-Free system.) Press the talk  
button with a short press during the  
read-out at the desired device, and then  
say one of the following voice  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt:“Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
commands to execute it.  
4. Say:[Beep] “Select phone”  
l
“Select phone”: Selects device  
(Mobile phone) when the talk button  
is short-pressed.  
“Select music player”: Selects  
device (Music player) when the talk  
button is short-pressed.  
“Edit”: Edits device when the talk  
button is short-pressed.  
“Continue”: Continues the list  
readout.  
“Delete”: Deletes the registered  
5. Prompt:“Please say the name of the  
device you would like to select.  
Available devices are XXXXX... (Ex.  
device A), XXXXX... (Ex. device B),  
XXXXX... (Ex. device C). Which  
device please?”  
l
l
6. Say:[Beep] “XXXXX... (Ex. Device  
B)”  
l
l
7. Prompt:“XXXXX... (Ex. Device B). Is  
this correct?”  
device when the talk button is short-  
pressed.  
8. Say: [Beep] “Yes” or “No”  
5-73  
Interior Features  
Bluetooth®  
9. If “Yes”, go to Step 10. If “No”, the  
Deleting a device  
procedure returns to Step 5.  
Registered devices (Mobile phone) can be  
deleted individually or collectively.  
10. Prompt: “XXXXX... (Ex. Device B)  
selected.”  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
(Music player)  
1. Press the pick-up button or talk button  
with a short press.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt:“Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
2. Say:[Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
4. Say: [Beep] “Select music player”  
5. Prompt: “Please say the name of the  
device you would like to select.  
Available devices are XXXXX... (Ex.  
device A), XXXXX... (Ex. device B),  
XXXXX... (Ex. device C). Which  
device please?”  
4. Say: [Beep] “Pairing options”  
5. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code.”  
NOTE  
6. Say: [Beep] “XXXXX... (Ex. Device  
B)”  
A registered device (Mobile phone) can be  
deleted using the registration list.  
7. Prompt: “XXXXX... (Ex. Device B).  
Is this correct?”  
6. Say:[Beep] “Delete”  
7. Prompt: “Please say the name of the  
device you would like to delete.  
Available devices are XXXXX... (Ex.  
device A), XXXXX... (Ex. device B),  
XXXXX... (Ex. device C), or all.  
Which device please?”  
8. Say: [Beep] “Yes” or “No”  
9. If “Yes”, go to Step 10. If “No”, the  
procedure returns to Step 5.  
10. Prompt: “XXXXX... (Ex. Device B)  
selected.”  
8. Say: [Beep] “X” (Say the number of  
NOTE  
the device to be deleted.)  
l
When the selected device connection is  
NOTE  
completed, the or symbol is  
displayed.  
Say “All” to delete all devices (Mobile phone).  
Some Bluetooth® audio devices need a  
l
9. Prompt:“Deleting XXXXX... (Ex.  
device B...) (Registered device tag). Is  
this correct?”  
certain amount of time before the or  
symbol is displayed.  
l
Device (Music player) selection can also be  
done by operating the panel button.  
10. Say: [Beep] “Yes”  
5-74  
Interior Features  
Bluetooth®  
11. Prompt: “Deleted”  
Bluetooth® Audio Preparation  
Registered device editing  
Bluetooth® audio device set-up  
Bluetooth® audio pairing, changes,  
deletions, and display of paired device  
information can be performed.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
1. The mode changes as follows each  
time the audio control dial is pressed.  
Select “BT SETUP”.  
3. Prompt:“Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
4. Say:[Beep] “Pairing options”  
*
5. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code.”  
6. Say:[Beep] “Edit”  
7. Prompt:“Please say the name of the  
device you would like to edit.  
Available devices are XXXXX... (Ex.  
device A), XXXXX... (Ex. device B),  
XXXXX... (Ex. device C). Which  
device please?”  
*
8. Say: [Beep] “X” (Say the number of  
the device to be edited.)  
9. Prompt: “New name please?”  
10. Say:[Beep] “XXXXX... (Ex. Device  
C)” (Speak a “device tag” an arbitrary  
name for the device.)  
* Depending on the mode selected, the  
indication changes.  
11. Prompt: “XXXXX... (Ex. device C)  
(Device tag), is this correct?”  
12. Say: [Beep] “Yes”  
13. Prompt: “New name saved.”  
5-75  
Interior Features  
Bluetooth®  
2. Turn the audio control dial and select a  
desired mode.  
NOTE  
If a Bluetooth® device has already been  
l
paired to the vehicle as a Hands-Free  
mobile phone, it does not need to be paired  
again when using the device as a  
Bluetooth® audio device. Conversely, it  
does not need to be paired again as a  
Hands-Free mobile phone if it has already  
been paired as a Bluetooth® audio device.  
Device registration can also be done using  
voice recognition.  
l
Concerning the operation of a Bluetooth®  
audio device itself, refer to its instruction  
manual.  
Some Bluetooth® audio devices have PIN  
codes (four digits). Refer to the audio  
device's instruction manual because the  
pairing procedure differs depending on  
whether it has a PIN code or not.  
Display  
PAIR  
DEVICE  
Mode  
Function  
Pairing mode Bluetooth® audio device pairing  
Changing link to  
Link change  
LINK  
CHANGE mode  
Bluetooth® audio  
device  
Pairing a Bluetooth® audio device  
which has a four-digit PIN code  
Deleting link to  
Bluetooth® audio  
device  
PAIR Pairing  
DELETE deletion mode  
Device  
DEVICE  
Displaying vehicle's  
1. Using the audio control dial, select the  
pairing mode “PAIR DEVICE” in the  
“BT SETUP” mode. (Refer to  
“Bluetooth® audio device set-up” for  
details.)  
information  
INFO  
Bluetooth® unit  
display mode information  
3. Press the audio control dial to  
determine the mode.  
Bluetooth® audio device pairing  
2. Press the audio control dial to  
determine the mode. After “ENTER  
PIN” is displayed on the audio display  
for three seconds, “PIN 0000” is  
displayed and the PIN code can be  
input.  
Any Bluetooth® audio device must be  
paired to the vehicle's Bluetooth® unit  
before it can be listened to over the  
vehicle's speakers.  
A maximum of seven devices including  
Bluetooth® audio devices and Hands-Free  
mobile phones can be paired to one  
vehicle.  
5-76  
Interior Features  
Bluetooth®  
3. Input the PIN code of your Bluetooth®  
audio device by pressing channel  
preset buttons 1 to 4 while “PIN 0000”  
is displayed.  
NOTE  
Some Bluetooth® audio devices need a  
l
certain amount of time before the symbol  
is displayed.  
l
l
Press channel preset button 1 to input  
the first digit, 2 for the second, 3 for  
the third, and 4 for the forth. For  
example, if the PIN code were “4213”  
press channel preset button 1 four  
times (1, 2, 3, 4), button 2 twice (1, 2),  
button 3 once (1), and button 4 three  
times (1, 2, 3). If the “PIN 0000”  
display disappears before finishing the  
PIN code input, repeat the procedure  
from Step 1.  
If the pairing failed, “Err” flashes for three  
seconds .  
Pairing cannot be performed while the  
vehicle is moving. If you attempt to perform  
pairing while the vehicle is moving, “PAIR  
DISABLE” is displayed .  
If seven Bluetooth® audio devices have  
already been paired to the vehicle, pairing  
cannot be performed and “MEMORY  
FULL” is displayed. Delete one paired  
device to pair another one.  
l
Pairing a Bluetooth® audio device  
which does not have a four-digit PIN  
code  
NOTE  
Some devices accept only a particular pairing  
code (Usually, “0000” or “1234”).  
If pairing cannot be completed, refer to the  
owner's manual of your mobile device, and try  
those numbers if necessary.  
1. Using the audio control dial, select the  
pairing mode “PAIR DEVICE” in the  
“BT SETUP” mode. (Refer to  
4. Press the audio control dial while the  
input PIN code is displayed.  
“PAIRING” flashes on the audio  
display.  
5. Operate the Bluetooth® audio device  
and set it to the pairing mode while  
“PAIRING” is flashing.  
“Bluetooth® audio set up” for details.)  
2. Press the audio control dial to  
determine the mode. After “ENTER  
PIN” is displayed on the audio display  
for three seconds, “PIN 0000” is  
displayed and the PIN code can be  
input.  
6. When the pairing is completed, and  
“PAIR SUCCESS” are displayed after  
about 10-30 seconds, after which  
3. Press the audio control dial while “PIN  
0000” is displayed. “PAIRING” flashes  
on the audio display.  
“PAIR SUCCESS” continues to be  
displayed for three seconds, and then  
the unit returns to the normal display.  
4. Operate the Bluetooth® audio device  
and set it to the pairing mode while  
“PAIRING” is flashing.  
5. As the Bluetooth® audio device  
requires a PIN code, input “0000”.  
5-77  
Interior Features  
Bluetooth®  
6. When the pairing is completed, and  
“PAIR SUCCESS” are displayed after  
about 10-30 seconds, after which  
3. The name of the currently linked  
Bluetooth® audio device is displayed.  
If no Bluetooth® audio device is  
currently linked, the name of the first  
device among the paired devices is  
displayed.  
“PAIR SUCCESS” continues to be  
displayed for three seconds, and then  
the unit returns to the normal display.  
NOTE  
4. Turn the audio control dial to select the  
name of the device you would like to  
link.  
l
If pairing cannot be completed, try “1234”  
instead. Refer to the owner's manual of  
your mobile device for the right PIN code.  
Some Bluetooth® audio devices need a  
l
certain amount of time before the symbol  
is displayed.  
If the pairing failed, “Err” flashes for three  
Device name 1  
Device name 2  
Device name 3  
l
seconds.  
l
Pairing cannot be performed while the  
vehicle is moving. If you attempt to perform  
pairing while the vehicle is moving, “PAIR  
DISABLE” is displayed .  
Device name 4  
Device name 5  
If seven Bluetooth® audio devices have  
l
already been paired to the vehicle, pairing  
cannot be performed and “MEMORY  
FULL” is displayed. Delete one paired  
device to pair another one.  
Device name 6  
Device name 7  
Device selection  
If several devices have been paired, the  
Bluetooth® unit links the device last  
paired. If you would like to link a  
different paired device, it is necessary to  
change the link. The order of device  
priority after the link has been changed is  
maintained even when the ignition is  
switched off.  
5. Press the audio control dial to select the  
device you would like to link. The  
symbol disappears, and “PAIRING”  
flashes in the audio display.  
1. Using the audio control dial, select the  
link change mode “LINK CHANGE”  
in the “BT SETUP” mode. (Refer to  
“Bluetooth® audio device set-up” for  
details.)  
NOTE  
When “GO BACK” is selected and the audio  
control dial is pressed, the display returns to  
“LINK CHANGE”.  
2. Press the audio control dial to  
determine the mode.  
5-78  
Interior Features  
Bluetooth®  
6. If the link to the desired device is  
successful, the symbol is displayed  
again, together with “LINK  
2. Press the audio control dial to  
determine the mode.  
3. The name of the first device among the  
paired devices is displayed.  
CHANGED”. “LINK CHANGED” is  
displayed for three seconds, then it  
returns to the normal display.  
4. Rotate the audio control dial and select  
the name of the paired device you  
would like to delete.  
NOTE  
Some Bluetooth® audio devices need a  
l
certain amount of time before the symbol  
is displayed.  
l
Device name 1  
Device name 2  
Device name 3  
If a Hands-Free type mobile phone has  
been the most recently paired device, the  
Bluetooth® unit links this device. If you  
would like to use a Bluetooth® audio type  
device which has been previously paired to  
the Bluetooth® unit, the link must be  
changed to this device.  
l
Device name 4  
Device name 5  
If an error occurs while trying to link a  
device, “Err” flashes in the audio display  
for three seconds, and the display returns to  
“LINK CHANGE”. If this occurs, check the  
pairing status of the Bluetooth® audio  
device and the location of the device in the  
vehicle (not in the luggage compartment or  
a metal-type box), and then try the link  
operation again.  
Device name 6  
Device name 7  
l
Device selection can also be done using  
voice recognition.  
How to confirm the device currently  
linked  
NOTE  
Only the names of paired devices can be  
displayed. If only one device is paired, only the  
name for this device is displayed.  
Switch to the link-change mode. (Refer to  
“Changing the link to a Bluetooth® audio  
device”)  
5. If a selection other than “GO BACK”  
is made and the audio control dial is  
pressed, “SURE ? NO” is displayed.  
The device name displayed first is the  
device which is currently linked.  
Deleting a device  
6. Rotate the audio control dial clockwise  
and switch the display to “SURE ?  
YES”.  
1. Using the audio control dial, select the  
pairing delete mode “PAIR DELETE”  
in the “BT SETUP”mode. (Refer to  
“Bluetooth® audio device set-up” for  
details.)  
5-79  
Interior Features  
Bluetooth®  
NOTE  
4. Rotate the audio control dial to select  
the information for the Bluetooth® unit  
which you would like to view.  
The display changes as follows depending on  
whether the audio control dial is rotated  
clockwise or counterclockwise.  
_
_
Clockwise: “SURE ? YES” displayed  
Counterclockwise: “SURE ? NO” displayed  
Device name  
BT address  
7. Press the audio control dial to delete  
the selected device.  
NOTE  
Select “GO BACK” and press the audio  
control dial to return to the “PAIR DELETE”  
display.  
8. “PAIR DELETED” is displayed for  
three seconds after the deletion is  
completed, and then it returns to the  
normal display.  
NOTE  
When “GO BACK” is selected and the audio  
control dial is pressed, the display returns to  
“DEVICE INFO”.  
NOTE  
If an error occurs while trying to delete the  
paired device, “Err” flashes in the display for  
three seconds and the display returns to  
“LINK DELETE”.  
qAvailable Language (Type A)  
The available languages are English,  
Spanish, and Canadian French. If the  
language setting is changed, all of the  
voice guidance and voice input  
commands are done in the selected  
language.  
Bluetooth® audio device information  
display  
1. Using the audio control dial, select the  
pair device information display mode  
“DEVICE INFO” in the “BT SETUP”  
mode. (Refer to “Bluetooth® audio  
device set-up” for details.)  
NOTE  
l
If the language setting is changed, device  
registration is maintained.  
l
Phonebook records are not cleared, but  
2. Press the audio control dial to  
determine the mode.  
3. The name of the Bluetooth® unit  
device is displayed.  
each language has a separate phonebook.  
Therefore, entries created in one language  
will need to be re-entered in the phonebook  
of the new language.  
l
Do these steps before you start driving.  
These less used functions are too  
distracting to undertake while driving until  
you are fully familiar with the system.  
5-80  
Interior Features  
Bluetooth®  
(Method 1)  
3. Prompt: “Would you like to change  
the language to French (Desired  
language)?”  
1. Press the pick-up button or talk button  
with a short press.  
4. Say: [Beep] “Yes”  
2. Say:[Beep] “Setup”  
5. Prompt: “Please wait. Switching to  
French phonebook. French selected”  
(Spoken in the newly selected  
language).  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
4. Say: [Beep] “Language”  
qVoice Recognition (Type A)  
5. Prompt: “Select a language: English,  
French, or Spanish.”  
In this section, the basic operation of the  
voice recognition is explained.  
6. Say: [Beep] “French” (Speak the  
desired language: “English”, “French”  
or “Spanish”)  
Activating Voice Recognition  
To Activate the Main Menu: Press the  
pick-up button or talk button with a short  
press.  
NOTE  
Other language settings can also be made  
while in the current setting by saying the name  
of the language in the native pronunciation.  
Ending Voice Recognition  
Use one of the following methods:  
l
Press and hold the talk-button.  
Press the hang-up button.  
l
7. Prompt:“French (Desired language)  
selected. Is this correct?”  
Skipping Voice Guidance (for faster  
operation)  
8. Say:[Beep] “Yes”  
Press and release the talk-button.  
9. Prompt: “French (Desired language)  
selected” (Spoken in the newly selected  
language).  
NOTE  
The Bluetooth® Hands-Free system is  
l
operable several seconds after the ignition  
is switched to ACC or ON (requires less  
than 15 seconds).  
(Method 2)  
1. Press the pick-up button or talk button  
with a short press.  
l
When operating the audio unit or the A/C  
while using Bluetooth® Hands-Free, the  
beep sounds or voice guidance (audio unit)/  
cannot be heard.  
2. Say: [Beep] “French” (Say the desired  
language: “English”, “French” or  
“Spanish”). (Change the desired  
language by saying the language  
name.)  
NOTE  
Other language settings can also be made  
while in the current setting by saying the name  
of the language in the native pronunciation.  
5-81  
Interior Features  
Bluetooth®  
l
Tutorial  
Dialects or different wording other than  
Hands-Free prompts cannot be  
recognized by voice recognition. Speak  
in the wording specified by the voice  
commands.  
It is not necessary to face the  
microphone or approach it. Speak the  
voice commands while maintaining a  
safe driving position.  
Do not speak too slow or too loud.  
Speak clearly, without pausing between  
words or numbers.  
Close the windows and/or the  
moonroofto reduce loud noises from  
outside the vehicle, or turn down the  
airflow of the air-conditioning system  
while Bluetooth® Hands-Free is being  
used.  
The tutorial explains how to use  
Bluetooth® Hands-Free. To activate the  
tutorial, do the following:  
l
1. Press the pick-up button or talk button  
with a short press.  
2. Say:[Beep] “Tutorial”  
l
l
3. Follow the prompts to receive the  
appropriate voice guidance  
instructions.  
l
Commands useable anytime during  
voice recognition  
“Help” or “Go Back” are commands  
which can be used at anytime during  
voice recognition.  
l
Make sure the vents are not directing  
air up towards the microphone.  
Help function use  
The help function informs the user of all  
the available voice commands under the  
current conditions.  
NOTE  
If the voice recognition performance is not  
satisfactory.  
1. Say: [Beep] “Help”  
Refer to Voice Recognition Learning Function  
(Speaker Enrollment) (Type A) on page 5-84.  
Refer to Troubleshooting on page 5-124.  
2. Follow the prompts to receive the  
appropriate voice guidance  
instructions.  
qSecurity Setting (Type A)  
Returning to previous operation  
If a passcode is set, the system cannot be  
activated unless the passcode is input.  
This command is for returning to the  
previous operation while in the voice  
recognition mode.  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
Say: [Beep] “Go Back”  
To prevent a deterioration in the voice  
recognition rate and voice quality, the  
following points should be observed:  
Passcode setting  
l
The voice recognition cannot be  
1. Press the pick-up button or talk button  
with a short press.  
performed while voice guidance or  
the beep sound is operating. Wait  
until the voice guidance or the beep  
sound is finished before saying your  
commands.  
2. Say:[Beep] “Setup”  
5-82  
Interior Features  
Bluetooth®  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language,passcode, select phone or  
select music player.”  
Canceling the passcode  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
4. Say:[Beep] “Passcode”  
5. Prompt: “Passcode is disabled. Would  
you like to enable it?”  
1. Press the pick-up button or talk button  
with a short press.  
6. Say:[Beep] “Yes”  
2. Say:[Beep] “Setup”  
7. Prompt:“Please say a 4-digit passcode.  
Remember this passcode. It will be  
required to use this system.”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language,passcode, select phone or  
select music player.”  
8. Say: [Beep] “XXXX” (Say a desired 4-  
digit passcode, “PCode”.)  
4. Say:[Beep] “Passcode”  
9. Prompt:“Passcode XXXX (Passcode,  
PCode). Is this correct?”  
5. Prompt:“Passcode is enabled. Would  
you like to disable it?”  
10. Say: [Beep] “Yes”  
6. Say: [Beep] “Yes”  
11. Prompt:“Passcode is enabled.”  
Using Bluetooth® Hands-Free with a  
passcode  
7. Prompt:“Passcode is disabled.”  
Confirmation Prompts  
The confirmation prompt confirms the  
command content to the user before  
advancing to the operation requested by  
the user. When this function is turned on,  
the system reads out the voice input  
command previously received and  
confirms whether the command is correct  
before advancing to the command  
execution.  
1. Press the pick-up button or talk button  
with a short press.  
2. Prompt: “Hands-Free system is  
locked. State the passcode to  
continue.”  
3. Say: [Beep] “XXXX” (Say the set  
passcode “PCode”.)  
When the confirmation prompt function is  
turned on: (Ex. “Calling John's device. Is  
this correct?”)  
When the confirmation prompt function is  
turned off: (Ex. “Calling John's device.”)  
4. If the correct passcode is input, voice  
guidance “XXXXXX... (Ex. “Mary's  
device”) (Device tag) is connected” is  
announced.  
If the passcode is incorrect, voice  
guidance “XXXX (4-digit passcode,  
Pcode) incorrect passcode, please try  
again” is announced.  
NOTE  
If the confirmation prompt function is turned  
off when making an emergency call, the system  
reads out and confirms the command before  
executing it.  
5-83  
Interior Features  
Bluetooth®  
1. Press the pick-up button or talk button  
with a short press.  
When voice recognition learning is  
done for the first time  
2. Say: [Beep] “Setup”  
1. Press the pick-up button or talk button  
with a short press.  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language,passcode, select phone or  
select music player.”  
2. Say: [Beep] “Voice training”  
3. Prompt: “This operation must be  
performed in a quiet environment while  
the vehicle is stopped. See the owner's  
manual for the list of required training  
phrases. Press and release the talk  
button when you are ready to begin.  
Press the hang-up button to cancel at  
any time.”  
4. Say: [Beep] “Confirmation prompts”  
5. Prompt: “Confirmation prompts are  
on/off. Would you like to turn  
confirmation prompts off/on?”  
6. Say: [Beep] “Yes”  
4. Press the talk button with a short press.  
7. Prompt: “Confirmation prompts are  
off/on.”  
5. The voice guidance reads out the voice  
input command number (refer to the  
voice input command list for voice  
recognition learning). (Ex. “Please read  
phrase 1”)  
q
Voice Recognition Learning Function  
(Speaker Enrollment) (Type A)  
The voice recognition learning function  
enables voice recognition appropriate to  
the characteristics of the user's voice. If  
the recognition of the voice input  
commands to the system is not adequate,  
this function can largely improve the  
system's voice recognition of the user. If  
your voice can be recognized sufficiently  
without using this function, you may not  
realize the added benefit of the function.  
To register your voice, the voice input  
command list must be read out. Read out  
the list when the vehicle is parked.  
6. Say: [Beep] “0123456789” (Say the  
voice input command for voice  
recognition learning (1 to 8) according  
to the voice guidance.)  
7. Prompt: “Speaker enrollment is  
complete.”  
NOTE  
If an error occurred in the voice recognition  
learning, re-learning can be done by pressing  
the talk button with a short press.  
Perform the registration in as quiet a place  
as possible (page 5-81). The registration  
must be performed completely. The  
required time is a few minutes. The user  
needs to be seated in the driver's seat with  
the voice input command list for voice  
recognition learning visible.  
Voice recognition re-learning  
If voice recognition learning has already  
been done.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say:[Beep] “Voice training”  
5-84  
Interior Features  
Bluetooth®  
l
3. Prompt: “Enrollment is enabled/  
disabled. Would you like to disable/  
enable or retrain?”  
Do not read out parentheses. “ (” and  
hyphens “ ” are used for separating  
numbers in a phone number.  
_
Ex.  
4. Say: [Beep] “Retrain”  
“ (888) 555-1212” must be spoken “Eight, eight,  
eight, five, five, five, one, two, one, two.”  
5. Prompt: “This operation must be  
performed in a quiet environment while  
the vehicle is stopped. See the owner's  
manual for the list of required training  
phrases. Press and release the talk  
button when you are ready to begin.  
Press the hang-up button to cancel at  
any time.”  
Phrase  
Command  
0123456789  
1
2
3
4
5
6
7
8
(888) 555-1212  
Call  
Dial  
Setup  
Cancel  
Continue  
Help  
6. Press the talk button with a short press.  
7. The voice guidance reads out the voice  
input command number (refer to the  
voice input command list for voice  
recognition learning). (Ex. “Please read  
phrase 1”)  
NOTE  
l
The applicable phrase appears in the audio  
display.  
l
After user voice registration is completed,  
voice guidance “Speaker enrollment is  
complete” is announced.  
8. Say: [Beep] “0123456789” (Say the  
voice input command for voice  
recognition learning (1 to 8) according  
to the voice guidance.)  
Voice recognition learning on/off  
1. Press the pick-up button or talk button  
with a short press.  
9. Prompt: “Speaker enrollment is  
complete.”  
2. Say: [Beep] “Voice training”  
NOTE  
3. Prompt: “Enrollment is enabled/  
disabled. Would you like to disable/  
enable or retrain?”  
If an error occurred in the voice recognition  
learning, re-learning can be done by pressing  
the talk button with a short press.  
4. Say: [Beep] “Disable” or “Enable”  
Voice input command list for voice  
recognition learning  
5. When “Disable” is spoken, the voice  
recognition learning is turned off.  
When “Enable” is spoken, the voice  
recognition learning is turned on.  
When reading out, the following points  
must be observed:  
l
Read out the numbers one at a time  
6. Prompt: “Speaker Enrollment is  
disabled/enabled.”  
correctly and naturally. (For example,  
“1234” must be read out “one, two,  
three, four” not “twelve, thirty four”.)  
5-85  
Interior Features  
Bluetooth®  
8. (Device with Bluetooth® version 2.0)  
Input the displayed 4-digit pairing code  
into the device.  
qBluetooth® Preparation (Type B)  
Device pairing  
To use Bluetooth® audio and Hands-Free,  
the device equipped with Bluetooth® has  
to be paired to the unit using the  
following procedure. A maximum of  
seven devices including Bluetooth® audio  
devices and Hands-Free mobile phones  
can be paired.  
(Device with Bluetooth® version 2.1  
or higher)  
Make sure the displayed 6-digit code  
on the audio is also displayed on the  
device, and touch the  
.
Connection permission and phonebook  
access permission for your mobile  
device may be required depending on  
the mobile device.  
NOTE  
The Bluetooth® system may not operate for 1  
or 2 minutes after the ignition is switched to  
ACC or ON. However, this does not indicate a  
problem. If the Bluetooth® system does not  
connect automatically after 1 or 2 minutes  
have elapsed, make sure that the Bluetooth®  
setting on the device is normal and attempt to  
reconnect the Bluetooth® device from the  
vehicle side.  
9. If pairing is successful, the functions of  
the device connected to Bluetooth® are  
displayed.  
10. (Devices compatible with Mazda E-  
mail/SMS function)  
SMS (Short Message Service)  
messages, and E-mail for the device  
are downloaded automatically. A  
download permission operation for  
your device may be required  
depending on the device.  
Pairing Procedure  
1. Select the  
icon on the home screen  
and display the Settings screen.  
NOTE  
2. Select the  
3. Select  
tab.  
When Call history and messages are  
downloaded automatically, each automatic  
download setting must be on. Refer to  
Communication Settings on page 5-107.  
.
4. Turn the Bluetooth® setting on.  
5. Select to display the  
After a device is registered, the system  
automatically identifies the device. By  
activating Bluetooth® Hands-Free again,  
or by activating Bluetooth® Hands-Free  
first after switching the ignition from OFF  
to ACC, the device connection condition  
is indicated in the center display.  
message and switch to the device  
operation.  
6. Using your device, perform a search  
for the Bluetooth® device (Peripheral  
device).  
7. Select “Mazda” from the device list  
searched by the device.  
5-86  
Interior Features  
Bluetooth®  
IMPORTANT note about pairing and  
automatic reconnection:  
NOTE  
The following functions can be used for the  
Hands-Free or audio.  
l
If pairing is redone on the same  
l
Hands-Free: Phone calls and E-mail/SMS  
mobile phone device, first clear  
“Mazda” displayed on the  
Bluetooth® setting screen of the  
mobile device.  
Audio: Bluetooth® audio, Pandora®, Aha™,  
l
Stitcher™ radio  
Disconnecting a device  
l
When the OS of the device is updated,  
1. Select the  
icon on the home screen  
the pairing information may be deleted.  
If this happens, reprogram the pairing  
information to the Bluetooth® unit.  
and display the Settings screen.  
2. Select the  
3. Select  
tab.  
l
Before you pair your device, make sure  
that Bluetooth® is “ON”, both on your  
.
phone and on the vehicle.  
4. Turn the Bluetooth® setting on.  
Device selection  
5. Select the device name which is  
currently connected.  
If several devices have been paired, the  
Bluetooth® unit links the device last  
paired. If you would like to link a  
different paired device, it is necessary to  
change the link. The order of device  
priority after the link has been changed is  
maintained even when the ignition is  
switched off.  
6. Select  
.
Deleting a device  
Selecting and deleting devices  
1. Select the  
icon on the home screen  
and display the Settings screen.  
Connecting other devices  
2. Select the  
tab.  
1. Select the  
icon on the home screen  
3. Select  
4. Turn the Bluetooth® setting on.  
.
and display the Settings screen.  
2. Select the  
3. Select  
4. Turn the Bluetooth® setting on.  
tab.  
5. Select the device name which you  
would like to delete.  
.
6. Select  
7. Select  
.
5. Select the name of the device you  
would like to connect.  
.
Deleting all devices  
1. Select the icon on the home screen  
6.  
selection  
Connects both devices as Hands-Free  
and Bluetooth® audio.  
selection  
and display the Settings screen.  
2. Select the  
3. Select  
tab.  
.
Connects as a Hands-Free device.  
selection  
.
Connects as Bluetooth® audio.  
4. Select  
5-87  
Interior Features  
Bluetooth®  
5. Select  
.
Skipping Voice Guidance (for faster  
operation)  
6. Select  
Changing PIN code  
PIN code (4 digits) can be changed.  
.
Press and release the talk button.  
Troubleshooting for Voice Recognition  
If you do not understand an operation  
method while in the voice recognition  
mode, say “Tutorial” or “Help”.  
1. Select the  
icon on the home screen  
and display the Settings screen.  
2. Select the  
3. Select  
tab.  
.
Commands useable anytime during  
voice recognition  
.
“Go Back” and “Cancel” are commands  
which can be used at anytime during  
voice recognition.  
4. Select  
5. Select  
.
6. Input the new PIN code to be set.  
7. Select  
Returning to previous operation  
To return to the previous operation, say,  
“Go Back” while in voice recognition  
mode.  
.
qAvailable Language (Type B)  
The Bluetooth® Hands-Free System  
applies to the following languages:  
Cancel  
To put the Bluetooth® Hands-Free system  
in standby mode, say, “Cancel” while in  
voice recognition mode.  
l
English  
Spanish  
French  
l
l
To prevent a deterioration in the voice  
recognition rate and voice quality, the  
following points should be observed:  
Refer to Settings on page 5-49.  
qVoice Recognition (Type B)  
l
The voice recognition cannot be  
In this section, the basic operation of the  
voice recognition is explained.  
performed while voice guidance or  
the beep sound is operating. Wait  
until the voice guidance or the beep  
sound is finished before saying your  
commands.  
Activating Voice Recognition  
Press the talk button.  
l
Phone related commands are available  
Ending Voice Recognition  
only when your phone is connected via  
Bluetooth®. Make sure your phone is  
connected via Bluetooth® before you  
operate phone related voice commands.  
Use one of the following methods:  
l
Press the hang-up button.  
Say, “Cancel”.  
Operate the commander switch or the  
l
l
l
Music play commands, such as Play  
center display (only when vehicle is  
stopped).  
Artist and Play Album can be used  
only in USB audio mode.  
Do not speak too slowly or loudly (no  
l
loud voice).  
5-88  
Interior Features  
Bluetooth®  
l
l
Speak clearly, without pausing between  
words or numbers.  
Dialects or different wording other than  
Hands-Free prompts cannot be  
recognized by voice recognition. Speak  
in the wording specified by the voice  
commands.  
l
l
It is not necessary to face the  
microphone or approach it. Speak the  
voice commands while maintaining a  
safe driving position.  
Close the windows and/or the  
moonroof to reduce loud noises from  
outside the vehicle, or turn down the  
airflow of the air-conditioning system  
while Bluetooth® Hands-Free is being  
used.  
l
Make sure the vents are not directing  
air up towards the microphone.  
NOTE  
If the voice recognition performance is not  
satisfactory.  
Refer to Troubleshooting on page 5-124.  
5-89  
Interior Features  
Bluetooth®  
qAudio Operation Using Voice Recognition (Type B)  
Main audio operation  
The below commands are examples of the available commands.  
When the talk button is pressed and the following command is spoken out, the audio can  
be operated. The commands in the () can be omitted. The specified name and number are  
put into the {}.  
Corresponding audio  
Voice command  
Function  
source  
(Go to/Play) AM (Radio)  
(Go to/Play) FM (Radio)  
Switches the audio source to AM radio.  
Switches the audio source to FM radio.  
All  
All  
(Go to/Play) Bluetooth (Audio) Switches the audio source to Bluetooth® audio.  
All  
(Go to/Play) Pandora  
Switches the audio source to Pandora®.  
Switches the audio source to Aha™  
Switches the audio source to Stitcher™ Radio.  
Switches the audio source to USB 1.  
Switches the audio source to USB 2.  
Plays the selected playlist.  
All  
(Go to/Play) Aha (Radio)  
(Go to/Play) Stitcher  
.
All  
All  
(Go to/Play) USB 1  
All  
(Go to/Play) USB 2  
All  
Play Playlist {Playlist name}  
Play Artist {Artist name}  
Play Album {Album name}  
Play Genre {Genre name}  
Play Folder {Folder name}  
USB  
USB  
USB  
USB  
USB  
Plays the selected artist.  
Plays the selected album.  
Plays the selected genre.  
Plays the selected folder.  
NOTE  
l
Some commands cannot be used depending on devices and use conditions.  
If the Bluetooth® device, USB, or AUX is not connected, the related commands cannot be used.  
l
5-90  
Interior Features  
Bluetooth®  
1. Press the pick-up button or talk button  
with a short press.  
Bluetooth® Hands-Free  
(Type A)í  
2. Say: [Beep] “Phonebook”  
qMaking a Call  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
Phonebook Usage  
Telephone calls can be made by saying  
the name of a person (voice tag) whose  
phone number has been registered in  
Bluetooth® Hands-Free in advance. Refer  
to Phonebook registration.  
4. Say:[Beep] “New entry”  
5. Prompt: “Name please.”  
6. Say: [Beep] “XXXXX... (Ex. “Mary's  
phone”)” (Say a voice tag for the name  
registered.)  
1. Press the pick-up button or talk button  
with a short press.  
7. Prompt: “Adding XXXXX... (Ex.  
“Mary's phone”) (Registered voice  
tag). Is this correct?”  
2. Say:[Beep] “Call”  
3. Prompt: “Name please.”  
8. Say:[Beep] “Yes”  
4. Say: [Beep] “XXXXX... (Ex. “John's  
phone”)” (Say a voice tag registered in  
the phonebook.)  
9. Prompt: “Home, Work, Mobile, or  
Other?”  
5. Prompt: “Calling XXXXX... (Ex.  
“John's phone”) XXXX (Ex. “at  
home”). Is this correct?” (Voice tag and  
phone number location registered in  
phonebook).  
10. Say: [Beep] “Mobile” (Say “Home” ,  
“Work”, “Mobile”, or “Other”, for the  
desired location to be registered.)  
11. Prompt: “Mobile (Location to be  
registered). Is this correct?”  
6. Say: [Beep] “Yes”  
7. Prompt: “Dialing”  
12. Say:[Beep] “Yes”  
13. Prompt: “Number, please.”  
NOTE  
14. Say:[Beep] “XXXXXXXXXXX”  
(Say the phone number to be  
registered.)  
The “Call” command and the voice tag can be  
combined. Ex. In Step 2, say, “Call John's  
phone”, then, Steps 3 and 4 can be skipped.  
15. Prompt: “XXXXXXXXXXX  
(Phone number registration). After the  
beep, continue to add numbers, or say  
Go-Back to re-enter the last entered  
numbers, or press the Pick-Up button  
to save the number.”  
Phonebook registration  
Phone numbers can be registered to the  
Bluetooth® Hands-Free phonebook.  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
íSome models.  
5-91  
Interior Features  
Bluetooth®  
16. (Registration)  
5. Prompt: “The Hands-Free System is  
ready to receive a contact from a  
phone. Only a home, a work, and a  
mobile number can be imported, This  
process requires operation of a mobile  
phone. refer to the phone's manual for  
more information”  
Press the pick-up button or say  
“Enter”, then go to Step 17.  
(Adding/inputting telephone  
number)  
Say, “XXXX” (desired telephone  
number), then go to Step 15.  
(Telephone number correction)  
Say, “Go Back”. The prompt replies,  
“Go Back. The last entered numbers  
have been removed.”. Then go back  
to Step 13.  
6. Device (Mobile phone) operation:  
Select one entry from the phonebook  
and send it using Bluetooth®.  
7. Prompt: “X (Number of locations  
which include data) numbers have been  
imported. What name would you like  
to use for these numbers?”  
17. Prompt: “Number saved. Would you  
like to add another number for this  
entry?”  
8. Say: [Beep] “XXXXX... (Ex. “Mary's  
phone”)” (Say a voice tag for the name  
registered.)  
18. Say: [Beep] “Yes” or “No”.  
19. If “Yes”, an additional phone number  
registration can be made for the same  
entry.  
9. Prompt: “Adding XXXXX... (Ex.  
“Mary's phone”) (Voice tag). Is this  
correct?”  
If “No”, the system returns to standby  
status.  
10. Say:[Beep] “Yes”  
(Import contact)  
11. Prompt: “Number saved. Would you  
like to import another contact?”  
Phonebook data from your device (Mobile  
phone) can be sent and registered to your  
Bluetooth® Hands-Free phonebook using  
Bluetooth®.  
12. Say: [Beep] “Yes” or “No”  
13. If “Yes”, the procedure proceeds to  
1. Press the pick-up button or talk button  
with a short press.  
Step 5.  
If “No”, the system returns to standby  
status.  
2. Say:[Beep] “Phonebook”  
Editing phonebook  
The data registered to the Bluetooth®  
Hands-Free phonebook can be edited.  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
4. Say: [Beep] “Import contact”  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
1. Press the pick-up button or talk button  
with a short press.  
5-92  
Interior Features  
Bluetooth®  
2. Say:[Beep] “Phonebook”  
13. Prompt: “XXXXXXXX (Telephone  
number) After the beep, continue to  
add numbers, or say Go-Back to re-  
enter the last entered numbers, or  
press the Pick-Up button to save the  
number.”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
4. Say: [Beep] “Edit”  
14. (Number Change)  
5. Prompt: “Please say the name of the  
entry you would like to edit or say,  
“List names”.”  
Press the pick-up button, then go to  
Step 15.  
(Adding/inputting telephone  
number)  
6. Say: [Beep] “XXXXX... (Ex. “Mary's  
phone”)” (Say the voice tag for the  
registered name to be edited in the  
phonebook.)  
Say, “XXXX” (desired telephone  
number), then go to Step 13.  
(Telephone number correction)  
Say, “Go Back”. The prompt replies,  
“Go Back. The last entered numbers  
have been removed. Number,  
please.”. Then go back to Step 12.  
7. Prompt: “Home, Work, Mobile, or  
Other?”  
8. Say:[Beep] “Home” (Say the  
registered location to be edited:  
“Home”, “Work”, “Mobile”, or  
“Other”.)  
15. Prompt: “Number changed.”  
Phonebook data deletion  
9. Prompt: “XXXXX... (Ex. “Mary's  
phone”) (Registered voice tag) XXXX  
(Ex. “Home”) (Registered location). Is  
this correct?”  
(Erasing individual phonebook data)  
Individual data registered to the  
Bluetooth® Hands-Free phonebook can be  
cleared.  
10. Say: [Beep] “Yes”  
NOTE  
11. Prompt: “The current number is  
XXXXXXXXXXX (Ex. “555-1234”)  
(Currently registered number). New  
number, please.”  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
1. Press the pick-up button or talk button  
with a short press.  
NOTE  
If there was no previous phone number  
registered to a location (Ex. “Work”), the  
prompt will only read out “Number, please”  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
12. Say: [Beep] “XXXXXXXXXXX  
(Ex. “555-5678”)” (Say the new  
phone number to be registered.)  
4. Say: [Beep] “Delete”  
5. Prompt: “Please say the name of the  
entry you would like to delete or say,  
“List names”. ”  
5-93  
Interior Features  
Bluetooth®  
6. Say:[Beep] “XXXXX... (Ex. “John's  
phone”)” (Say the registered voice tag  
to be deleted from the phonebook.)  
9. Prompt: “Please wait, erasing the  
Hands-Free system phonebook.”  
10. Prompt: “Hands-Free system  
phonebook erased.”  
7. Prompt: “Deleting XXXXX... (Ex.  
“John's phone”) (Registered voice tag)  
Home (Registered location). Is this  
correct?”  
Read-out of names registered to the  
Bluetooth® Hands-Free phonebook  
Bluetooth® Hands-Free can read out the  
list of names registered to its phonebook.  
8. Say: [Beep] “Yes”  
9. Prompt: “XXXXX... (Ex. “John's  
phone”) (Registered voice tag) Home  
(Registered location) deleted.”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say:[Beep] “Phonebook”  
(Complete deletion of the phonebook  
data)  
All data registered to the Bluetooth®  
Hands-Free phonebook can be erased.  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
4. Say: [Beep] “List names”  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
5. Prompt: “XXXXX..., XXXXX...,  
XXXXX... (Ex. “John's phone”, Mary's  
phone, Bill's phone)” (Voice guidance  
reads out the voice tags registered to  
the phonebook.)  
1. Press the pick-up button or talk button  
with a short press.  
Press the talk button with a short press  
during the read-out at the desired name,  
and then say one of the following voice  
commands to execute it.  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
l
“Continue”: Continues the list  
readout.  
“Call”: Calls the registered  
4. Say: [Beep] “Erase all”  
l
phonebook data when the talk  
button is short-pressed.  
“Edit”: Edits the registered  
phonebook data when the talk  
button is short-pressed.  
“Delete”: Deletes the registered  
phonebook data when the talk  
button is short-pressed.  
“Previous”: Returns to the previous  
phonebook data in read-out when  
the talk button is short-pressed.  
5. Prompt: “Are you sure you want to  
erase everything from your Hands-Free  
system phonebook?”  
l
6. Say: [Beep] “Yes”  
l
7. Prompt: “You are about to delete  
everything from your Hands-Free  
system phonebook. Do you want to  
continue?”  
l
8. Say: [Beep] “Yes”  
5-94  
Interior Features  
Bluetooth®  
6. Prompt: “End of list, would you like  
to start from the beginning?”  
6. (Dialing)  
Press the pick-up button or say “Dial”,  
then go to Step 7.  
(Adding/inputting telephone  
number)  
Say, “XXXX” (desired telephone  
number), then go to Step 5.  
(Telephone number correction)  
Say, “Go Back”. The prompt replies,  
“Go Back. The last entered numbers  
have been removed.”. Then go back to  
Step 3.  
7. Say: [Beep] “No”  
8. The procedure returns to Step 3.  
Redial Function  
Redialing the number of the person  
previously dialed using the phone is  
possible.  
1. Press the pick-up button or talk button  
with a short press.  
7. Prompt: “Dialing”  
2. Say: [Beep] “Redial”  
3. Prompt: “Dialing”  
NOTE  
The “Dial” command and a telephone number  
can be combined. Ex. In Step 2, say, “Dial  
123-4567” then, Steps 3 and 4 can be skipped.  
Telephone Number Input  
NOTE  
Practice this while parked until you are  
confident you can do it while driving in a non-  
taxing road situation. If you are not completely  
comfortable, make all calls from a safe  
parking position, and only start driving when  
you can devote your full attention to driving.  
Emergency calls  
A call can be made to the emergency  
phone number (911: U.S.A./Canada, 066:  
Mexico) using the voice input command.  
It may not function properly in some areas  
in Mexico.  
1. Press the pick-up button or talk button  
with a short press.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say:[Beep] “Dial”  
2. Say: [Beep] “Emergency”  
3. Prompt: “Number, please”  
3. - U.S.A./Canada vehicles - Prompt:  
“Dialing “911”, is this correct?”  
- Mexico vehicles - Prompt: “Dialing  
“066”, is this correct?”  
4. Say: [Beep] “XXXXXXXXXXX  
(Telephone number)”  
5. Prompt: “XXXXXXXXXXX.  
(Telephone number) After the beep,  
continue to add numbers, or say Go-  
Back to re-enter the last entered  
numbers, or press the Pick-Up button  
to execute dialing.”  
4. Say: [Beep] “Yes”  
5. Prompt: “Dialing”  
5-95  
Interior Features  
Bluetooth®  
qReceiving an Incoming Call  
qTransferring a Call from a Device  
(Mobile Phone) to Hands-Free  
1. Prompt: “Incoming call, press the  
pick-up button to answer”  
Communication between devices (Mobile  
phone) can be switched to Bluetooth®  
Hands-Free.  
2. To accept the call, press the pick-up  
button.  
To reject the call, press the hang-up  
button.  
1. Press the talk button with a short press.  
2. Say: [Beep] “Transfer call”  
qHanging Up a Call  
3. Prompt: “Transferred call to Hands-  
Free system”  
Press the hang-up button during the call.  
A beep sound will confirm that call is  
ended.  
qCall interrupt  
A call can be interrupted to receive an  
incoming call from a third party.  
Switch to a new incoming call using the  
following methods.  
qMute  
The microphone can be muted during a  
call.  
Method 1  
1. Press the talk button with a short press.  
2. Say: [Beep] “Mute”  
1. Press the pick-up button.  
2. Prompt: “Swapping calls.”  
Method 2  
3. Prompt: “Microphone muted”  
Canceling mute  
1. Press the talk button with a short press.  
2. Say: [Beep] “Swap calls”  
3. Prompt:“Swapping calls.”  
NOTE  
1. Press the talk button with a short press.  
2. Say: [Beep] “Mute off”  
3. Prompt: “Microphone unmuted”  
l
To refuse an incoming call, press the hang-  
up button.  
qTransferring a Call from Hands-  
Free to a Device (Mobile Phone)  
l
After receiving a new incoming call, the  
Communication between the Hands-Free  
unit and a device (Mobile phone) is  
canceled, and the line can be switched to a  
standard call using a device (Mobile  
phone).  
previous call is placed on hold.  
Switching calls  
Switching back to the previous call can  
also be done.  
1. Press the talk button with a short press.  
2. Say:[Beep] “Transfer call”  
Method 1  
1. Press the pick-up button.  
2. Prompt: “Swapping calls.”  
3. Prompt: “Transferred call to phone”  
5-96  
Interior Features  
Bluetooth®  
Method 2  
Making calls using the phonebook  
1. Press the talk button with a short press.  
2. Say: [Beep] “Swap calls”  
3. Prompt: “Swapping calls.”  
Three-way call function  
1. Press the talk button with a short press.  
2. Say: [Beep] “Call”  
3. Prompt: “Name please.”  
4. Say: [Beep] “XXXXX... (Ex. “John's  
phone”)” (Say a voice tag registered in  
the phonebook.)  
1. Press the talk button with a short press.  
2. Say: [Beep] “Join calls”  
3. Prompt: “Joining calls”  
5. Prompt: “Calling XXXXX... (Ex.  
“John's phone”) XXXX (Ex. “at  
home”). Is this correct?” (Voice tag and  
phone number location registered in  
phonebook).  
Making a call using a telephone  
number  
1. Press the talk button with a short press.  
2. Say: [Beep] “Dial”  
6. Say: [Beep] “Yes”  
7. Prompt:“Dialing”  
3. Prompt: “Number, please”  
Redialing function  
4. Say: [Beep] “XXXXXXXXXXX  
(Telephone number)”  
1. Press the talk button with a short press.  
2. Say: [Beep] “Redial”  
3. Prompt:“Dialing”  
5. Prompt: “XXXXXXXXXXX.  
(Telephone number) After the beep,  
continue to add numbers, or say Go-  
Back to re-enter the last entered  
numbers, or press the Pick-Up button  
to execute dialing.”  
Ending the current call  
Press the hang-up button during the call.  
qDTMF (Dual Tone Multi-  
6. (Dialing)  
Frequency Signal) Transmission  
Press the pick-up button or say “Dial”,  
then go to Step 7.  
(Adding/inputting telephone  
number)  
Say, “XXXX” (desired telephone  
number), then go to Step 5.  
(Telephone number correction)  
Say, “Go Back”. The prompt replies,  
“Go Back. The last entered numbers  
have been removed.”. Then go back to  
Step 3.  
This function is used when transmitting  
DTMF via the user's voice. The receiver  
of a DTMF transmission is generally a  
home telephone answering machine or a  
company's automated guidance call center  
(When you send tone signals back  
according to the voice guidance  
recording).  
1. Press the talk button with a short press.  
2. Say:[Beep] “XXXX... send” (Say  
7. Prompt: “Dialing”  
DTMF code)  
5-97  
Interior Features  
Bluetooth®  
3. Prompt: “Sending XXXX... (DTMF  
code)”  
Bluetooth® Hands-Free  
(Type B)í  
qMaking a Call  
Phonebook Usage  
Telephone calls can be made by saying  
the contact name in the downloaded  
phonebook or the name of a person whose  
phone number has been registered in the  
Bluetooth® Hands-Free. Refer to Import  
contact (Download Phonebook).  
1. Press the talk button.  
2. Wait for the beep sound.  
3. Say:“Call XXXXX... (Ex. “John”)  
Mobile”.  
4. Follow the voice guidance to place the  
call.  
Screen operation  
1. Select the  
icon on the home screen  
and display the Communication screen.  
2. Select to display the contact  
list.  
3. Select the contact you would like to  
call to display the details for the  
contact.  
4. Select the desired phone number to  
make the call.  
Import contact (Download Phonebook)  
Phonebook data from your device (Mobile  
phone) can be sent and registered to your  
Bluetooth® Hands-Free phonebook using  
Bluetooth®.  
5-98  
íSome models.  
Interior Features  
Bluetooth®  
(Automatic downloading)  
Favorites Contacts  
The “Auto Download Contacts” setting  
must be on. When Hands-Free is  
connected to the device, the phonebook is  
downloaded automatically.  
Refer to Communication Settings on page  
5-107.  
A maximum of 50 contacts can be  
registered. It will take less time to make a  
call after registering the telephone  
number. In addition, you do not have to  
look for the person you want to call in the  
phonebook.  
(Manually downloading)  
Registering to your favorites  
If the “Auto Download Contacts” setting  
is off, download the phonebook using the  
following procedure.  
1. Select the  
icon on the home screen  
and display the Communication screen.  
2. Select  
to display the favorites  
1. Select the  
icon on the home screen  
list.  
and display the Communication screen.  
3. Select  
4. Select  
.
2. Select  
to display the contact  
.
or  
.
list.  
3. Select  
4. Select  
5. Select from the displayed list.  
or  
NOTE  
to switch to the  
When “Add New Contact” is selected,  
information such as the selected person’s name  
is also registered. In addition, when “Add New  
Contact Details” is selected, only the  
telephone number of the selected person is  
registered.  
device operation.  
5. If  
is selected, select  
.
6. Download will be started from the  
mobile phone.  
Making a call from your favorites  
NOTE  
l
If “Import All Contacts” is performed after  
1. Select the  
icon on the home screen  
saving the phonebook to the Bluetooth®  
unit, the phonebook will be overwritten.  
and display the Communication screen.  
l
2. Select to display the favorites  
A maximum of 1000 contacts can be  
list.  
registered to the phonebook.  
Phonebook, incoming/outgoing call record,  
l
3. (Only one phone number is  
registered to contact)  
and favorite memories are exclusive to each  
mobile phone to protect privacy.  
Select the contact information you  
would like to call. Go to Step 5.  
(Multiple phone numbers are  
registered to contact)  
Select the contact you would like to  
call to display the screen indicating the  
details for the contact. Go to Step 4.  
5-99  
Interior Features  
Bluetooth®  
4. Select the phone number you would  
like to call.  
5. Select the contact to display the  
keyboard screen.  
5. Select  
.
6. If a new name is input and  
is  
selected, the contact name is stored.  
Deleting from your favorites  
NOTE  
1. Select the  
icon on the home screen  
If the contact is long-pressed when the  
favorites list is displayed, the contact  
information can be edited (deleted, moved).  
and display the Communication screen.  
2. Select  
list.  
to display the favorites  
Telephone Number Input  
3. Select  
4. Select  
.
NOTE  
.
Practice this while parked until you are  
confident you can do it while driving in a non-  
taxing road situation. If you are not completely  
comfortable, make all calls from a safe  
parking position, and only start driving when  
you can devote your full attention to driving.  
5. Select the contact information which  
you would like to delete.  
6. Select  
.
Changing the display order of your  
favorites list  
1. Select the  
icon on the home screen  
and display the Communication screen.  
1. Select the  
icon on the home screen  
and display the Communication screen.  
2. When is pressed, the dial  
pad is displayed.  
2. Select  
to display the favorites  
.
list.  
3. Input the telephone number using the  
dial pad.  
3. Select  
4. Select  
4. Select  
to make the call.  
.
Numeral or symbol entry  
5. The contact can be moved after it is  
selected.  
Use the dial pad.  
Long-press the  
to input  
.
6. Slide the contact or move it using the  
Select  
to delete the currently input  
commander switch, then select  
.
value.  
Long-press  
to delete all input values.  
Changing contact name of your  
favorites  
Redial Function  
1. Select the  
icon on the home screen  
Makes a call to the last person called  
(latest person on outgoing call record)  
from the mobile phone/vehicle.  
and display the Communication screen.  
2. Select  
to display the favorites  
.
list.  
1. Press the talk button.  
2. Wait for the beep sound.  
3. Say: “Redial”  
3. Select  
4. Select  
.
5-100  
Interior Features  
Bluetooth®  
Call back Function  
1. If the vehicle is involved in a moderate  
to severe collision, notification of the  
call to 911 is made via audio and  
screen display. To cancel the call, press  
or hang-up  
Makes a call to the last person who called  
your (latest person on incoming call  
record) mobile phone/vehicle.  
1. Press the talk button.  
button within 10 seconds.  
2. Wait for the beep sound.  
3. Say: “Call back”  
2. If  
or hang-  
up button is not pressed within 10  
seconds, the call is made to 911  
automatically.  
Mobile 911 (U.S.A./Canada only)  
If the vehicle is involved in a moderate to  
severe collision, a call is made  
automatically to 911 from the connected  
device. The “Emergency Assistance Call”  
setting must be on.  
Refer to Communication Settings on page  
5-107.  
CAUTION  
Though the system can be set to not  
call 911, doing so will defeat the  
purpose of the system. Mazda  
recommends that the Mobile 911  
system remain activated.  
NOTE  
l
Mobile 911 is a secondary function of the  
audio entertainment system. Therefore, the  
mobile 911 function does not assure that  
the call is always made to 911 after an  
accident occurs.  
l
A Hands-Free device must be paired and  
connected. The 911 operator can verify the  
vehicle's position information using the  
Hands-Free device GPS if equipped.  
The 911 operator can verify the vehicle’s  
position information.  
5-101  
Interior Features  
Bluetooth®  
qReceiving an Incoming Call  
When an incoming call is received, the incoming call notification screen is displayed. The  
“Incoming Call Notifications” setting must be on.  
Refer to Communication Settings on page 5-107.  
To accept the call, press the pick-up button on the audio control switch or select  
the screen.  
To reject the call, press the hang-up button on the audio control switch or select  
the screen.  
on  
on  
The following icons are displayed on the screen during a call. Icons which can be used  
differ depending on use conditions.  
Icon  
Function  
Displays the Communication menu.  
Ends the call.  
Transferring a call from Hands-Free to a mobile phone  
Communication between the Bluetooth® unit and a device (mobile phone) is canceled, and  
an incoming call will be received by the device (mobile phone) like a standard call.  
Transferring a call from a device (mobile phone) to Hands-Free  
Communication between devices (mobile phone) can be switched to Bluetooth®  
Hands-Free.  
Mute  
The microphone can be muted during a call.  
When selected again, the mute is canceled.  
A call is made to other person during a call and a 3-way call can be made. Select the contact  
from the following to make a call.  
: Call History is displayed.  
: The phonebook is displayed.  
: The dial pad is displayed. Input the phone number.  
The device may be unusable depending on the contractual content.  
The call on hold is made to make a 3-way call.  
The device may be unusable depending on the contractual content.  
Switches the call on hold.  
DTMF (Dual Tone Multi-Frequency Signal) Transmission  
This function is used when transmitting DTMF via the dial pad. The receiver of a DTMF  
transmission is generally a home telephone answering machine or a company's automated  
guidance call center.  
Input the number using a dial pad.  
5-102  
Interior Features  
Bluetooth®  
NOTE  
Downloading messages  
l
If the ignition is switched off during a  
Up to 20 new messages can be  
downloaded and displayed from a  
connected device.  
Hands-Free call, the line is transferred to  
the device (Mobile phone) automatically.  
If the DTMF code has two or more digits or  
symbols, each one must be transmitted  
individually.  
l
NOTE  
For e-mail, 20 messages for each account can  
be downloaded.  
qCall Interrupt  
(Automatic downloading)  
The “Auto Download Email” (E-mail) or  
“Auto Download Text Message” (SMS)  
setting must be on. A message is  
downloaded automatically when the  
Bluetooth® unit is connected to the  
device.  
A call can be interrupted to receive an  
incoming call from a third party.  
When  
is selected or the pick-  
up button on the steering wheel is pressed,  
the current call is held and the system  
switches to the new incoming call.  
Refer to Communication Settings on page  
5-107.  
(Manually downloading)  
When the “Auto Download Email” (E-  
mail) or “Auto Download Text Message”  
(SMS) setting is off, the message is  
downloaded using the following  
procedure.  
When  
is selected, the current  
call is ended and the system switches to  
the new incoming call (GSM network  
only).  
When  
is selected or the hang-up  
button on the steering wheel is pressed, an  
incoming call is refused.  
NOTE  
l
1. Select the  
icon on the home screen  
The function may not be available  
and display the Communication screen.  
depending on the contractual content of the  
mobile device.  
The function may not be operable  
depending on the type of the telephone  
network and the mobile device.  
2. Select or to display  
l
the Inbox.  
3. Select  
.
4. Download will be started from the  
mobile phone.  
qReceiving and Replying to  
Messages (available only with E-  
mail/SMS compatible phones)  
SMS (Short Message Service) messages,  
and E-mail received by connected devices  
can be downloaded, displayed, and played  
(read by the system).  
Additionally, replies can also be made to  
calls and messages in the received  
messages.  
5-103  
Interior Features  
Bluetooth®  
NOTE  
l
Attached data is not downloaded.  
l
Messages up to 1 kilobyte (e-mail)/140-  
bytes (SMS) can be downloaded.  
l
A message list is created for each device.  
l
If the connected device does not correspond  
to MAP 1.0, the AT command is used to  
download. The downloaded message  
indicates that it is already read.  
l
Downloading using the AT command may  
not function depending on the connected  
device.  
Receiving messages  
(Method 1)  
When a device receives a message, a  
message received notification is  
displayed. The “Email Notifications” (E-  
mail) or “Text Notifications” (SMS)  
setting must be on.  
Refer to Communication Settings on page  
5-107.  
Select  
and display the message.  
(Method 2)  
1. Select the  
icon on the home screen  
and display the Communication screen.  
2. Select and display the new  
message list for e-mail and SMS.  
3. Select the message you would like to  
display.  
5-104  
Interior Features  
Bluetooth®  
The following icons are displayed in the lower part of the details on the message. Icons  
which can be used differ depending on use conditions.  
Icon  
Function  
Displays the Communication menu.  
Displays the inbox.  
Plays back a message.  
When selected again, playback is temporarily stopped.  
Displays the previous message.  
Displays the next message.  
Only replies to the sender of the currently displayed message.  
Select the sentence on the displayed reply screen and select the sentence for sending from  
the preset message.  
Select  
.
(Only E-mail)  
Replies to all members including CC.  
Select the sentence on the displayed reply screen and select the sentence for sending from  
the preset message.  
Select  
.
Makes a call to a person who sent a message.  
For E-mail, this function may not work depending on the device.  
Deletes a message.  
The messages stored in a device is also deleted.  
5-105  
Interior Features  
Bluetooth®  
NOTE  
4. Select the preset message which you  
would like to edit. The keyboard screen  
is displayed.  
Up to three preset messages can be selected.  
Example of use (verify unread E-mail)  
5. When the message is input and  
selected, the message is stored as a  
preset message.  
is  
1. Select the  
icon on the home screen  
and display the Communication screen.  
2. Select  
to display the inbox.  
NOTE  
l
Select the  
icon to change the language.  
icon to switch between  
capitalized and lower-case characters.  
Select the icon to return to the previous  
screen without storing the edit.  
l
l
Select the  
3. Select the unread message displayed in  
bold.  
4. The details of the message are  
displayed and replying to the message,  
making a call, or playback can be  
performed.  
Changing account for displaying (E-  
mail only)  
1. Select  
.
2. Select the account which you would  
like to display. Only the messages for  
the selected account are displayed in  
the inbox.  
Editing preset messages  
1. Select the  
icon on the home screen  
and display the Communication screen.  
2. Select  
.
3. Select  
.
5-106  
Interior Features  
Bluetooth®  
qCommunication Settings  
Select the  
Select  
icon on the home screen and display the Communication screen.  
to change the setting.  
Item  
Setting  
Function  
Go to Bluetooth® setting menu.  
Refer to Bluetooth® Preparation (Type B) on page 5-86.  
Bluetooth®  
―
Incoming Call  
Notifications  
On/Off  
Notifies when an incoming call is received.  
Auto Download Text  
Message  
Downloads SMS automatically when the Bluetooth® unit is connected  
to the device.  
On/Off  
On/Off  
On/Off  
On/Off  
On/Off  
Text Notifications  
Notifies when a new SMS is received.  
Downloads E-mail automatically when the Bluetooth® unit is  
connected to the device.  
Auto Download  
Email*1  
Email Notifications  
Notifies when a new Email is received.  
Downloads Call History automatically when the Bluetooth® unit is  
connected to the device.  
Auto Download Call  
History  
Auto Download  
Contacts*1  
Downloads the phonebook automatically when the Bluetooth® unit is  
connected to the device.  
On/Off  
Ringtone  
Car/Phone/Off Changes the ringtone setting.  
Adjusts using  
Phone Volume  
Adjusts the conversation volume.  
the slider.  
Adjusts using  
the slider.  
VR and Ringtone  
Adjusts the voice guidance and ringtone volume.  
First Name, Last  
Name  
Displays the contact information in alphabetical order of the first name.  
Displays the contact information in alphabetical order of the last name.  
Contacts Display  
Order  
Last Name, First  
Name  
Edits the preset message.  
Edit Preset Messages  
―
Refer to Receiving and Replying to Messages  
(available only with E-mail/SMS compatible phones) on page 5-103.  
Emergency Assistance  
Call  
On/Off  
Mobile Utilizes the Mobile 911 function.  
Initializes all Communication Settings.  
Restore Factory  
settings  
―
*1 Depending on the device, it may be necessary to acquire download permission on the  
device side.  
5-107  
Interior Features  
Bluetooth®  
NOTE  
Bluetooth® Audio (Type A)í  
Applicable Bluetooth® specification  
(Recommended)  
The battery consumption of Bluetooth®  
l
audio devices increases while Bluetooth® is  
connected.  
l
If a general mobile phone device is USB  
connected during music playback over the  
Bluetooth® connection, the Bluetooth®  
connection is disconnected. For this reason,  
you cannot have music playback over a  
Bluetooth® connection and music playback  
using a USB connection at the same time.  
The system may not operate normally  
depending on the Bluetooth® audio device.  
Ver. 2.0  
Response profile  
l
A2DP (Advanced Audio Distribution  
Profile) Ver. 1.0/1.2  
AVRCP (Audio/Video Remote Control  
l
Profile) Ver. 1.0/1.3  
l
A2DP is a profile which transmits only  
audio to the Bluetooth® unit. If your  
Bluetooth® audio device corresponds only  
to A2DP, but not AVRCP, you cannot  
operate it using the control panel of the  
vehicle's audio system. In this case, only  
the operations on the mobile device are  
available the same as when a portable  
audio device for a non-compliant  
Bluetooth® device is connected to the  
AUX terminal.  
qHow to Use the Bluetooth®  
Audio System  
Switching to Bluetooth® audio mode  
To listen to music or voice audio recorded  
to a Bluetooth® audio device, switch to  
the Bluetooth® audio mode to operate the  
audio device using the audio system  
control panel. Any Bluetooth® audio  
device must be paired to the vehicle's  
Bluetooth® unit before it can be used.  
Refer to Bluetooth® Preparation (Type A)  
on page 5-71.  
AVRCP  
Function  
Playback  
A2DP  
Ver. 1.0 Ver. 1.3  
―
―
―
―
―
―
X
X
X
X
X
X
X
X
Pause  
1. Turn on the Bluetooth® audio device's  
power.  
File (Track) up/down  
Reverse  
X
―
―
―
Fast-forward  
Text display  
2. Switch the ignition to ACC or ON.  
Make sure that the “ ” symbol is  
displayed in the audio display. The  
symbol is not displayed if an un-paired  
Bluetooth® audio device is being used  
or the vehicle's Bluetooth® unit has a  
malfunction.  
X: Available  
―: Not available  
NOTE  
Some Bluetooth® audio devices need a certain  
amount of time before the “ ” symbol is  
displayed.  
5-108 íSome models.  
Interior Features  
Bluetooth®  
3. Press the USB/AUX button ( ) to  
switch to the Bluetooth® audio mode  
and start playback.  
Fast-forward/Reverse (AVRCP Ver.  
1.3)  
Fast-forward  
If the current device version is lower  
than AVRCP Ver. 1.3: “BT Audio” is  
displayed.  
If the current device is AVRCP Ver. 1.3:  
The playback time is displayed.  
Press and hold the fast-forward button  
(
).  
Reverse  
Press and hold the reverse down button  
(
).  
NOTE  
If the Bluetooth® audio device does not  
l
Switching the display (AVRCP Ver. 1.3)  
begin playback, press the Play/Pause  
button (5).  
The information displayed on the audio  
display changes as follows each time the  
text button (  
playback.  
l
If a call is received on a Hands-Free mobile  
phone during playback from the Bluetooth®  
audio device, the playback is stopped.  
Playback from the Bluetooth® audio device  
resumes after the call ends.  
) is pressed during  
Information displayed  
on audio display  
Button  
Elapsed time  
Album name  
Song name  
Playback  
1. To listen to a Bluetooth® audio device  
over the vehicle's speaker system,  
switch the mode to Bluetooth® audio  
mode. (Refer to “Switching to  
Artist name  
NOTE  
l
Bluetooth® audio mode”)  
If title information is not available, “NO  
TITLE” is displayed.  
2. To stop playback, press the Play/Pause  
button (5).  
l
This unit cannot display some characters.  
Characters which cannot be displayed are  
indicated by an asterisk ( ).  
3. Press the button again to resume  
playback.  
Display scroll  
Selecting a file (track)  
Only 13 characters can be displayed at  
one time. To display the rest of the  
characters of a long title, press and hold  
Selects the next file (track)  
Short-press the track up button (  
turn the file dial clockwise.  
) or  
the text button (  
scrolls the next 13 characters. Press and  
hold the text button ( ) again after  
). The display  
Selects the beginning of the current file  
(track)  
the last 13 characters have been displayed  
to return to the beginning of the title.  
Short-press the track down button (  
or turn the file dial counterclockwise.  
)
5-109  
Interior Features  
Bluetooth®  
qBluetooth® Audio Device  
Bluetooth® Audio (Type B)í  
Information Display  
Applicable Bluetooth® specification  
(Recommended)  
If a Bluetooth® audio device is connected,  
the following information is displayed in  
the audio display.  
Ver. 1.1/1.2/2.0 EDR/2.1 EDR/3.0  
(conformity)  
AVRCP Ver.  
lower than 1.3 Ver. 1.3  
AVRCP  
Response profile  
l
A2DP (Advanced Audio Distribution  
Device name  
Title  
X
X
X
X
X
X
X
―
Profile) Ver. 1.0/1.2  
AVRCP (Audio/Video Remote Control  
―
―
―
―
―
―
l
Artist name  
Album name  
File number  
Playback time  
Folder number  
Profile) Ver. 1.0/1.3/1.4  
A2DP is a profile which transmits only  
audio to the Bluetooth® unit. If your  
Bluetooth® audio device corresponds only  
to A2DP, but not AVRCP, you cannot  
operate it using the control panel of the  
vehicle's audio system. In this case, only  
the operations on the mobile device are  
available the same as when a portable  
audio device for a non-compliant  
Bluetooth® device is connected to the  
AUX terminal.  
X: Available  
―: Not available  
NOTE  
Some information may not display depending  
on the device, and if the information cannot be  
displayed, “NO TITLE” is indicated.  
AVRCP  
Function A2DP  
Ver.  
1.0  
Ver. 1.3  
Ver. 1.4  
Playback  
Pause  
X
X
X
X
X
X
X
X
File (Track)  
up/down  
―
X
X
X
Reverse  
―
―
―
―
―
―
X
X
X
X
X
X
Fast-forward  
Text display  
Depends on Depends on  
Repeat  
Shuffle  
Scan  
―
―
―
―
―
―
―
―
device  
Depends on Depends on  
device device  
Depends on Depends on  
device  
device  
device  
Folder  
up/down  
Depends on  
device  
―
X: Available  
―: Not available  
5-110 íSome models.  
Interior Features  
Bluetooth®  
NOTE  
The battery consumption of Bluetooth®  
l
audio devices increases while Bluetooth® is  
connected.  
l
If a general mobile phone device is USB  
connected during music playback over the  
Bluetooth® connection, the Bluetooth®  
connection is disconnected. For this reason,  
you cannot have music playback over a  
Bluetooth® connection and music playback  
using a USB connection at the same time.  
The system may not operate normally  
depending on the Bluetooth® audio device.  
l
5-111  
Interior Features  
Bluetooth®  
qHow to Use the Bluetooth® Audio System  
Switching to Bluetooth® audio mode  
To listen to music or voice audio recorded to a Bluetooth® audio device, switch to the  
Bluetooth® audio mode to operate the audio device using the audio system control panel.  
Any Bluetooth® audio device must be paired to the vehicle's Bluetooth® unit before it can  
be used.  
Refer to Bluetooth® Preparation (Type B) on page 5-86.  
1. Turn on the Bluetooth® audio device's power.  
2. Switch the ignition to ACC or ON.  
3. Select the  
4. When  
icon on the home screen and display the Entertainment screen.  
is selected, switches to the Bluetooth® audio mode to begin playback.  
NOTE  
l
If Bluetooth® audio is used after using Pandora®, Aha™ or Stitcher™ radio, the application on  
the mobile device has to be closed first.  
If the Bluetooth® audio device does not begin playback, select the  
icon.  
l
l
If the mode is switched from Bluetooth® audio mode to another mode (radio mode), audio  
playback from the Bluetooth® audio device stops.  
5-112  
Interior Features  
Bluetooth®  
Playback  
To listen to a Bluetooth® audio device over the vehicle's speaker system, switch the mode  
to Bluetooth® audio mode. (Refer to “Switching to Bluetooth® audio mode”)  
After switching to the Bluetooth® audio mode, the following icons are displayed in the  
lower part of the display. Icons which can be used differ depending on the version of the  
Bluetooth® audio device which you are currently using.  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
(AVRCP Ver. 1.4 only)  
Displays the top level folder/file list.  
Select the folder which you want to select.  
The files in the selected folder are displayed.  
Select the file you want to play.  
(AVRCP Ver. 1.3 or higher)  
Replays the song currently being played repeatedly.  
When selected again, the songs in the folder are played repeatedly.  
Select it again to cancel.  
Icons change when the song is repeated or the folder is repeated.  
(AVRCP Ver. 1.3 or higher)  
Plays songs in the folder in random order.  
When selected again, the songs on the device are played in random order.  
Select it again to cancel.  
Icons change during folder shuffle or device shuffle.  
Scans the titles in a folder and plays the beginning of each song to aid in finding a desired  
song.  
When selected again, the beginning of each song on the device is played.  
When selected again, the operation is canceled and the song currently being played  
continues.  
Returns to the beginning of the previous song.  
Long-press to fast reverse. It stops when you remove your hand from the icon or the  
commander knob.  
Plays the Bluetooth® audio. When selected again, playback is temporarily stopped.  
Advances to the beginning of the next song.  
Long-press to fast forward. It stops when you remove your hand from the icon or the  
commander knob.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-36.  
5-113  
Interior Features  
Bluetooth®  
Example of use (When searching for a  
song from the top level of a device)  
qBluetooth® Audio Device  
Information Display  
If a Bluetooth® audio device is connected,  
the following information is displayed in  
the center display.  
1. Select the  
icon and display the  
folder/file list at the top level.  
AVR- AVRCP Ver.  
AVRCP Ver.  
CP  
Ver.  
1.3  
1.4 or  
higher  
lower than 1.3  
Device name  
X
X
X
X
X
Remaining  
battery  
charge of  
device  
X
Song name  
Artist name  
Album name  
―
―
―
X
X
X
X
X
X
2. When the folder is selected, folders/file  
lists in the folder are displayed. When  
the playlist is selected, the file list is  
displayed.  
Playback  
time  
―
―
―
X
X
X
X
Genre name  
Album art  
image  
―
―
3. Select the desired song.  
NOTE  
Select  
X: Available  
―: Not available  
to move to a folder one level higher.  
NOTE  
Some information may not display depending  
on the device, and if the information cannot be  
displayed, “Unknown - - -” is indicated.  
5-114  
Interior Features  
Bluetooth®  
qHow to Use Pandora®*1í  
Pandora® is free personalized Internet radio. Simply enter a favorite artist, track, genre, and  
Pandora® will create a personalized station that plays their music and more like it. Rate  
songs by giving thumbs-up and thumbs-down feedback to further refine your station,  
discover new music and help Pandora® play only music you like.  
*1 Pandora®, the Pandora® logo, and the Pandora® trade dress are trademarks or registered  
trademarks of Pandora Media, Inc., used with permission.  
NOTE  
To operate Pandora® from your Bluetooth® device, perform the following in advance:  
Create Pandora® account on the Web.  
l
Create Pandora® station using Pandora® application.  
l
Install Pandora® application on your device.  
l
Playback  
Select the  
icon on the home screen and display the Entertainment screen. When  
is selected, the following icons are indicated in the bottom part of the center  
display.  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Displays the station list.  
Use to switch to other stations.  
Thumbs-Down  
Press the  
icon to tell Pandora® not to play this track.  
Thumbs-Up  
Press the  
icon to tell Pandora® “you like this track” and it helps to bring in more tracks  
like it to your station.  
Bookmarking  
Bookmarks the song or artist currently being played.  
Plays the track. When selected again, playback is temporarily stopped.  
Goes to the next song.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-36.  
íSome models. 5-115  
Interior Features  
Bluetooth®  
NOTE  
3. Select  
artist.  
to bookmark the  
l
The skip function may not be available  
depending on the device.  
l
The number of skips is limited by  
Pandora®.  
l
If the  
icon is selected when the skip song  
function is running, the next song is  
skipped.  
Selection from station list  
Selection can be made from a  
programmed radio station list.  
1. Select the  
icon.  
2. Select the desired radio station.  
NOTE  
When  
is selected, songs randomly  
selected from the radio station list are played.  
Selecting the sort method  
The displayed order of the station list can  
be changed.  
1. Select the  
2. Select  
icon.  
.
3. Select  
to display in the order  
starting from the newly created station.  
4. Select to display in alphabetical  
order.  
NOTE  
The displayed order of  
cannot be  
changed.  
Bookmarking  
You can bookmark song or artist to check  
out later on the Web.  
1. Select the icon.  
2. Select  
song.  
to bookmark the  
5-116  
Interior Features  
Bluetooth®  
qHow to Use Aha™*1  
Aha is an application which can be used to enjoy various Internet content such as Internet  
radio and podcasts.  
Stay connected to your friends activities by getting updates from Facebook and Twitter.  
Using the location-based service, nearby services and destinations can be searched or real-  
time local information can be obtained.  
For details on Aha, refer to “http://www.aharadio.com/”.  
*1 Aha, the Aha logo, and the Aha trade dress are trademarks or registered trademarks of  
Harman International Industries, Inc., used with permission.  
NOTE  
l
The service content provided by Aha varies depending on the country in which the user resides. In  
addition, the service is not available in some countries.  
To operate Aha from your Bluetooth® device, perform the following in advance:  
l
l
Install the Aha application to your device.  
Create an Aha account for your device.  
Log onto Aha using your device.  
l
l
l
Select the preset station on your device.  
5-117  
Interior Features  
Bluetooth®  
Playback  
Select the  
icon on the home screen and display the Entertainment screen. When  
is  
selected, the following icons are displayed at the bottom of the center display. The  
displayed icon differs depending on the selected station.  
In addition, icons other than the following icons may be displayed.  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Displays the main menu.  
Use to switch to other stations.  
Displays the content list.  
Use to switch to other desired content on the station.  
Shout  
Records voice.  
Records voice and posts it as playable audio to Facebook and other social stations.  
Like*2  
Evaluates the current content as “Like”.  
Dislike*2  
Evaluates the current content as “Dislike”.  
Reverses for 15 seconds.  
Map (vehicles with navigation system)  
Displays the destination searched by the location based services on the navigation system.  
Call  
A call can be made to the telephone number of a shop searched using the Location Based  
Services. Available when a device is connected as a Hands-Free.  
Returns to the previous content.  
Pauses playback of the content. When selected again, playback resumes.  
Goes to the next content.  
5-118  
Interior Features  
Bluetooth®  
Icon  
Function  
Fast-forwards for 30 seconds.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-36.  
*2 Some stations may use alternate variations of Like and Dislike, based on station type or provider.  
Main menu  
Select the  
icon.  
Switch the tab and select the station category.  
Tab  
Function  
Displays the preset station list set on the device.  
Select the preset station name to play the station content.  
Presets  
Nearby  
Select the desired station.  
Guidance is provided to the searched destination near the vehicle's position.  
You can designate desired categories previously set using the filter setting on  
your device.  
NOTE  
The available Location Based Services may differ because the services depend on the content  
provided by Aha™.  
5-119  
Interior Features  
Bluetooth®  
Example of use (Location Based  
Services)  
Shout  
Some social stations, such as Facebook or  
Caraoke, support the ability to record and  
share voice messages using the “Shout”  
function.  
1. Select the desired station from the  
“Nearby” tab on the main menu.  
The destination name or address  
playback starts in the order of the  
destination name list.  
1. Select the icon and start the  
countdown (3, 2, 1, 0). Recording  
starts when the countdown reaches  
zero.  
2. Records voice.  
3. Select  
recording.  
and store/post the  
NOTE  
l
Recordable time varies depending on the  
station (Max. 30 seconds).  
l
Recording stops automatically when the  
recordable time has elapsed. You can then  
post or delete the recording.  
2. When the  
icon is selected, the  
currently displayed destination is  
displayed on the navigation system  
(vehicles with navigation system).  
3. When the  
icon is selected, a phone  
call is placed to the currently displayed  
destination.  
4. Select the  
content list.  
icon and display the  
Selection of other destinations from the  
list can be made.  
5-120  
Interior Features  
Bluetooth®  
qHow to Use Stitcher™*1 Radio  
What is Stitcher™ Radio?  
Stitcher™ radio is an application which can be used to listen to Internet radio or stream  
podcasts.  
Recommended content is automatically selected by registering content which you put into  
your favorites, or by pressing the Like or Dislike button.  
For details on Stitcher™ Radio, refer to “http://stitcher.com/”.  
*1 Stitcher™, the Stitcher™ logo, and the Stitcher™ trade dress are trademarks or  
registered trademarks of Stitcher, Inc., used with permission.  
NOTE  
To operate Stitcher™ Radio from your Bluetooth® device, perform the following in advance:  
l
Install the Stitcher™ Radio application to your device.  
l
Create a Stitcher™ Radio account for your device.  
l
Log onto Stitcher™ Radio using your device.  
5-121  
Interior Features  
Bluetooth®  
Playback  
Select the Entertainment screen and display the  
icon on the home screen. When  
is selected, the following icons are indicated in the bottom part of the center  
display.  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Displays the station list.  
Use to switch to other stations.  
Dislike  
Evaluates the current program as “Dislike”.  
Like  
Evaluates the current program as “Like”.  
Adds the current station to your favorites or deletes the current station from your favorites.  
Reverses for 30 seconds.  
Plays the station. Select it again to pause playback.  
Goes to the next station.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-36.  
5-122  
Interior Features  
Bluetooth®  
Station list  
1. Select the  
icon and display the station list.  
Favorites station name: Select to display the program registered to your favorites.  
Category name: A recommended category selected from your favorites by  
Stitcher™ is displayed. Select it to display the category program.  
2. Select the program name to play it.  
Add to your favorites  
Delete from your favorites  
If the current program has not been  
registered to your favorites, it can be  
registered to your favorites.  
If the current program has already been  
registered to your favorites, the program  
can be deleted from your favorites.  
1. Select the  
icon to display the  
1. Select the  
icon.  
favorites station which the registration  
can be added.  
2. The program is automatically deleted  
from the favorites station.  
2. Select the station name which you want  
to register.  
3. Select  
to add the program to the  
selected favorites station.  
NOTE  
l
Multiple favorites stations can be selected  
and registered.  
l
Favorites stations registered by oneself as  
well those set by default are displayed.  
5-123  
Interior Features  
Bluetooth®  
Troubleshootingí  
Mazda Bluetooth® Hands-Free Customer Service  
If you have any problems with Bluetooth®, contact our toll-free customer service center.  
l
U.S.A.  
Phone:800-430-0153 (Toll-free)  
Web: www.mazdausa.com/mazdaconnect  
Canada  
l
Phone:800-430-0153 (Toll-free)  
Web: www.mazdahandsfree.ca  
Mexico  
l
Center of Attention to Client (CAC)  
Phone:01-800-01-MAZDA (Toll-free)  
Web: www.mazdamexico.com.mx  
Bluetooth® Device pairing, connection problems  
Symptom  
Cause  
Solution method  
First make sure the device is  
compatible with the Bluetooth® unit,  
and then check whether the  
Bluetooth® function and the Find  
Mode/Visible setting*1 on the device  
are turned on. If pairing is still not  
possible after this, contact an  
Authorized Mazda Dealer or Mazda  
Bluetooth® Hands-Free Customer  
Service.  
Unable to perform pairing  
―
Perform pairing using the following  
The pairing information paired to the procedure.  
Pairing cannot be performed again Bluetooth® unit or device is not  
recognized correctly.  
Clear “Mazda” stored in the  
device.  
Perform pairing again.  
l
l
The Bluetooth® function and the  
Unable to perform pairing  
Does not connect automatically  
when starting the engine  
Check whether the Bluetooth®  
function and the Find Mode/Visible  
setting*1 on the device are turned on  
and pairing or reconnect.  
Find Mode/Visible setting*1 on the  
device may turn off automatically  
after a period of time has elapsed  
depending on the device.  
Automatically connects, but then  
disconnects suddenly  
The device is in a location in which  
radio wave interference can occur  
Move the device to a location in  
Disconnects intermittently  
easily, such as inside a bag in a rear which radio wave interference is less  
seat, in a rear pocket of a pair of  
pants.  
likely to occur.  
Does not connect automatically  
when starting the engine  
The pairing information is updated  
when the device OS is updated.  
Perform pairing again.  
*1 Setting which detects the existence of a device external to the Bluetooth® unit  
5-124 íSome models.  
Interior Features  
Bluetooth®  
NOTE  
l
When the OS of the device is updated, the pairing information may be deleted. If this happens,  
reprogram the pairing information to the Bluetooth® unit.  
l
l
If you pair your phone which has already been paired to your vehicle more than once in the past,  
you need to delete “Mazda” on your mobile device. Then, execute the Bluetooth® search on your  
mobile device once again, and pair to a newly detected “Mazda”.  
Before you pair your device, make sure that Bluetooth® is “ON”, both on your phone and on the  
vehicle.  
Voice recognition related problems  
Symptom  
Cause  
Solution method  
l
Poor voice recognition  
Excessive, slow speech.  
Excessive, forceful speech  
(shouting).  
Speaking before the beep sound Regarding the causes indicated on  
has ended.  
Loud noise  
l
l
l
the left, be careful with how you  
speak. In addition, when numbers are  
(speaking or noise from outside/ spoken in a sequence, recognition  
False recognition of numbers  
inside vehicle).  
ability will improve if no stop is  
placed between the numbers.  
l
l
Airflow from A/C is blowing  
against the microphone.  
Speaking in off-standard  
expressions (dialect).  
A poor connection or malfunction  
with the microphone may have  
occurred. Consult an Authorized  
Mazda Dealer.  
There is a malfunction in the  
microphone.  
Poor voice recognition  
If there is any malfunction after  
checking the pairing situation, check  
for device pairing or connection  
problems.  
There is a problem with the  
connection between the Bluetooth®  
unit and the device.  
Phone-related voice recognition is  
disabled  
By carrying out the following  
measures, the rate of recognition will  
improve.  
l
Clear memory from the  
phonebook which is not used  
very often.  
Avoid shortened names, use full  
The Bluetooth® system is under a  
condition in which recognition is  
difficult.  
Names in the phonebook are not  
easily recognized  
l
names.  
(Recognition improves the longer  
the name is. By not using names  
such as “Mom”, “Dad”, recogni-  
tion will improve.)  
When operating the audio, a song  
name is not recognized  
Song names cannot be recognized by  
voice.  
―
Guidance can be skipped by quickly  
pressing and releasing the Talk  
button.  
You want to skip guidance  
―
5-125  
Interior Features  
Bluetooth®  
Regarding problems with calls  
Symptom  
Cause  
Solution method  
For about three seconds after starting  
When starting a call, vehicle noise  
from the other party can be heard  
a call, the Bluetooth® unit's Noise  
Suppression function requires time to with the device.  
adapt to the call environment.  
This does not indicate a problem  
The other party cannot be heard or  
the speaker's voice is quiet  
The volume is set at zero or low.  
Increase the volume.  
Other problems  
Symptom  
Cause  
Solution method  
The indication for the remaining  
battery is different between the  
vehicle and the device  
The indication method is different  
between the vehicle and the device.  
―
If the number has been registered  
into the phonebook, the  
The number has not been registered incoming/outgoing call record is  
When a call is made from the  
vehicle, the telephone number is  
updated in the incoming/outgoing  
call record but the name does not  
appear  
into the phonebook.  
updated by the name in the  
phonebook when the engine is  
restarted.  
The cell phone does not synchronize  
with the vehicle regarding the  
incoming/outgoing call record  
Some types of cell phones do not  
synchronize automatically.  
Operate the cell phone for  
synchronization.  
It takes a long time to complete the A maximum of 60 seconds is  
function for changing the language required.  
―
5-126  

Related Topics

Bluetooth? Bluetooth? Hands-Free (Type A) Bluetooth? Hands-Free (Type B) Bluetooth? Audio (Type A) Bluetooth? Audio (Type B) Troubleshooting

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot