2013-2016 Mazda Cx-5 SUV Bluetooth? -> Bluetooth? User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Bluetooth? -> Bluetooth? for Your Mazda Cx-5 SUV First Generation (2013-2016)

Interior Features  
Bluetooth®  
Bluetooth®í  
Bluetooth® Hands-Free outline  
When a Bluetooth® device (mobile phone) is connected to the vehicle's Bluetooth® unit via  
radio wave transmission, a call can be made or received by pressing the talk button, pick-  
up button, or hang-up button on the audio remote control switch, or by operating the center  
display. For example, even if a device (mobile phone) is in your coat pocket, a call can be  
made without taking the device (mobile phone) out and operating it directly.  
Bluetooth® audio outline  
When a portable audio unit equipped with the Bluetooth® communication function is  
paired to the vehicle, you can listen to music stored on the paired portable audio device  
from the vehicle's speakers. It is not necessary to connect the portable audio device to the  
vehicle's external input terminal. After programming, operate the vehicle audio control  
panel to play/stop the audio.  
NOTE  
l
For your safety, a device can be paired only when the vehicle is parked. If the vehicle starts to  
move, the pairing procedure will end. Park the vehicle in a safe place before pairing.  
The communication range of a Bluetooth® equipped device is about 10 meters (32 ft) or less.  
l
Basic audio operation is available using voice commands even if Bluetooth® is not connected.  
l
l
For safety reasons, operation of the center display is disabled while the vehicle is being driven.  
However, items not displayed in gray can be operated using the commander switch while the  
vehicle is being driven.  
CAUTION  
Some Bluetooth® mobile devices are not compatible with the vehicle.  
Consult an Authorized Mazda Dealer, Mazda's call center or Web support center for  
information regarding Bluetooth® mobile device compatibility:  
Ø U.S.A.  
Phone:800-430-0153  
Web: www.mazdausa.com/mazdaconnect  
Ø Canada  
Phone:800-430-0153  
Web: www.mazdahandsfree.ca  
Ø Mexico  
Center of Attention to Client (CAC)  
Phone:01-800-01-MAZDA  
Web: www.mazdamexico.com.mx  
Applicable Bluetooth® specification (Recommended)  
Type A: Ver. 2.0  
Type B: Ver. 1.1/1.2/2.0 EDR/2.1 EDR/3.0 (conformity)  
íSome models.  
5-69  
Interior Features  
Bluetooth®  
qComponent Parts  
Audio unit  
Type A  
Type B  
Talk button, Pick-up button and Hang-up button  
Talk button  
Pick-up button  
Hang-up button  
Microphone  
Microphone  
Microphone (Hands-Free)  
The microphone is used for speaking voice commands or when making a Hands-Free call.  
Talk button, Pick-Up button and Hang-Up button (Hands-Free)  
The basic functions of Bluetooth® Hands-Free can be used for such things as making calls  
or hanging up using the talk, pick-up and hang-up buttons on the steering wheel.  
Commander switch (Type B)  
The commander switch is used for volume adjustment and display operation. Tilt or turn  
the commander knob to move the cursor. Press the commander knob to select the icon.  
Volume adjustment  
The power/volume dial of the audio unit*1 or the volume dial of the commander switch*2 is  
used to adjust the volume. Turn the dial to the right to increase volume, to the left to  
decrease it.  
The volume can also be adjusted using the volume button on the steering wheel.  
*1 Type A  
*2 Type B  
NOTE  
If the volume is lower compared to other audio modes, increase the volume from the device side.  
5-70  
Interior Features  
Bluetooth®  
(Type B)  
Conversation volume and the volume of the voice guidance and ringtone can each be set in  
advance.  
1. Select the  
2. Select  
icon on the home screen and display the Communication screen.  
.
3. Adjust the  
and the  
using the slider.  
11. Prompt: “YYYY is this correct?”  
12. Say:[Beep] “Yes” or “No”  
qBluetooth® Preparation (Type A)  
Bluetooth®Hands-Free Preparation  
Pairing code setting  
13. If “Yes”, go to Step 14. If “No”, the  
procedure returns to Step 9.  
The 4-digit pairing code setting for  
registration of your cell phone (pairing)  
can be set beforehand.  
14. Prompt: “Your new pairing code is  
YYYY. Use this pairing code when  
pairing devices to the Hands-Free  
system. Do you want to pair a device  
now?”  
NOTE  
The initial setting value is “0000”.  
1. Press the pick-up button or talk button  
with a short press.  
15. Say:[Beep] “Yes” or “No”  
16. If “Yes”, the system switches to the  
device registration mode. If “No”, the  
system returns to standby status.  
2. Say:[Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
Device pairing  
To use Bluetooth® Hands-Free, the device  
equipped with Bluetooth® has to be paired  
to the Bluetooth® unit using the following  
procedure.  
A maximum of seven devices including  
Hands-Free mobile phones and  
Bluetooth® audio devices can be paired to  
one vehicle.  
4. Say:[Beep] “Pairing options”  
5. Prompt:“Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code.”  
6. Say:[Beep] “Set pairing code”  
7. Prompt:“Your current pairing code is  
XXXX. Do you want to change it to a  
different pairing code?”  
NOTE  
If a Bluetooth®device has already been paired  
to the vehicle as a Bluetooth® audio device, it  
does not need to be paired again when using  
the device as a Hands-Free mobile phone.  
Conversely, it does not need to be paired again  
as a Bluetooth® audio device if it has already  
been paired as a Hands-Free mobile phone.  
8. Say:[Beep] “Yes”  
9. Prompt: “Please say a 4-digit pairing  
code.”  
10. Say: [Beep] “YYYY”  
5-71  
Interior Features  
Bluetooth®  
1. Activate the Bluetooth® application of  
the device.  
13. Say:[Beep] “XXXX - - -” (Say a  
“device tag”, an arbitrary name for  
the device.) Example: “Stan's device.”  
NOTE  
For the operation of the device, refer to its  
NOTE  
instruction manual.  
Say a paired “device tag” within 10 seconds.  
If more than two devices are to be paired, they  
cannot be paired with the same or similar  
“device tag”.  
2. Press the pick-up button or talk button  
with a short press.  
3. Say:[Beep] “Setup”  
14. Prompt:“XXXXXX - - - (Ex. “Stan's  
device”) (Device tag). Is this  
correct?”  
4. Prompt:“Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
15. Say: [Beep] “Yes”  
16. Prompt:“Pairing complete”  
5. Say:[Beep] “Pairing options”  
After a device is registered, the system  
automatically identifies the device. By  
activating Bluetooth® Hands-Free again,  
or by activating Bluetooth® Hands-Free  
first after switching the ignition from OFF  
to ACC, the system reads out a voice  
guidance, “XXXXXX - - - (Ex. “Stan's  
device”) (Device tag) is connected”.  
6. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code.”  
7. Say:[Beep] “Pair”  
8. Prompt: “Start the pairing process on  
your Bluetooth® device. Your pairing  
code is 0000 (XXXX). Input this on  
your Bluetooth® device when  
NOTE  
l
When the pairing is completed, the  
prompted on the device. See device  
manual for instructions.”  
symbol is displayed.  
Some Bluetooth® audio devices need a  
l
9. Using the device, perform a search for  
the Bluetooth® device (Peripheral  
device).  
certain amount of time before the symbol  
is displayed.  
l
Device registration can also be done by  
operating the audio unit.  
Depending on the device, the registration  
NOTE  
l
For the operation of the device, refer to its  
status may be lost after a certain period of  
time. If this occurs, repeat the entire  
process from Step 1.  
instruction manual.  
10. Select “Mazda” from the device list  
searched by the device.  
Registered device read-out  
Bluetooth® Hands-Free can read-out the  
devices registered to its system.  
11. Input the 4-digit pairing code to the  
device.  
12. Prompt:“Please say the name of the  
device after the beep.”  
5-72  
Interior Features  
Bluetooth®  
l
NOTE  
“Previous”: Returns to the previous  
device in read-out when the talk  
button is short-pressed.  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
8. Prompt:“End of list, would you like to  
start from the beginning?”  
1. Press the pick-up button or talk button  
with a short press.  
9. Say: [Beep] “No”  
2. Say:[Beep] “Setup”  
10. Prompt: “Returning to main menu.”  
Device selection  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
If several devices have been paired, the  
Bluetooth® unit links the device last  
paired. If you would like to link a  
different paired device, it is necessary to  
change the link. The order of device  
priority after the link has been changed is  
maintained even when the ignition is  
switched off.  
4. Say:[Beep] “Pairing options”  
5. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code”  
6. Say:[Beep] “List”  
(Hands-Free phone)  
7. Prompt: “XXXXX..., XXXXX...,  
XXXXX... (Ex. Device A, device B,  
device C)” (The voice guidance reads  
out the device tags registered to the  
Hands-Free system.) Press the talk  
button with a short press during the  
read-out at the desired device, and then  
say one of the following voice  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt:“Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
commands to execute it.  
4. Say:[Beep] “Select phone”  
l
“Select phone”: Selects device  
(Mobile phone) when the talk button  
is short-pressed.  
“Select music player”: Selects  
device (Music player) when the talk  
button is short-pressed.  
“Edit”: Edits device when the talk  
button is short-pressed.  
“Continue”: Continues the list  
readout.  
“Delete”: Deletes the registered  
5. Prompt:“Please say the name of the  
device you would like to select.  
Available devices are XXXXX... (Ex.  
device A), XXXXX... (Ex. device B),  
XXXXX... (Ex. device C). Which  
device please?”  
l
l
6. Say:[Beep] “XXXXX... (Ex. Device  
B)”  
l
l
7. Prompt:“XXXXX... (Ex. Device B). Is  
this correct?”  
device when the talk button is short-  
pressed.  
8. Say: [Beep] “Yes” or “No”  
5-73  
Interior Features  
Bluetooth®  
9. If “Yes”, go to Step 10. If “No”, the  
Deleting a device  
procedure returns to Step 5.  
Registered devices (Mobile phone) can be  
deleted individually or collectively.  
10. Prompt: “XXXXX... (Ex. Device B)  
selected.”  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
(Music player)  
1. Press the pick-up button or talk button  
with a short press.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt:“Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
2. Say:[Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
4. Say: [Beep] “Select music player”  
5. Prompt: “Please say the name of the  
device you would like to select.  
Available devices are XXXXX... (Ex.  
device A), XXXXX... (Ex. device B),  
XXXXX... (Ex. device C). Which  
device please?”  
4. Say: [Beep] “Pairing options”  
5. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code.”  
NOTE  
6. Say: [Beep] “XXXXX... (Ex. Device  
B)”  
A registered device (Mobile phone) can be  
deleted using the registration list.  
7. Prompt: “XXXXX... (Ex. Device B).  
Is this correct?”  
6. Say:[Beep] “Delete”  
7. Prompt: “Please say the name of the  
device you would like to delete.  
Available devices are XXXXX... (Ex.  
device A), XXXXX... (Ex. device B),  
XXXXX... (Ex. device C), or all.  
Which device please?”  
8. Say: [Beep] “Yes” or “No”  
9. If “Yes”, go to Step 10. If “No”, the  
procedure returns to Step 5.  
10. Prompt: “XXXXX... (Ex. Device B)  
selected.”  
8. Say: [Beep] “X” (Say the number of  
NOTE  
the device to be deleted.)  
l
When the selected device connection is  
NOTE  
completed, the or symbol is  
displayed.  
Say “All” to delete all devices (Mobile phone).  
Some Bluetooth® audio devices need a  
l
9. Prompt:“Deleting XXXXX... (Ex.  
device B...) (Registered device tag). Is  
this correct?”  
certain amount of time before the or  
symbol is displayed.  
l
Device (Music player) selection can also be  
done by operating the panel button.  
10. Say: [Beep] “Yes”  
5-74  
Interior Features  
Bluetooth®  
11. Prompt: “Deleted”  
Bluetooth® Audio Preparation  
Registered device editing  
Bluetooth® audio device set-up  
Bluetooth® audio pairing, changes,  
deletions, and display of paired device  
information can be performed.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
1. The mode changes as follows each  
time the audio control dial is pressed.  
Select “BT SETUP”.  
3. Prompt:“Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
4. Say:[Beep] “Pairing options”  
*
5. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set Pairing  
Code.”  
6. Say:[Beep] “Edit”  
7. Prompt:“Please say the name of the  
device you would like to edit.  
Available devices are XXXXX... (Ex.  
device A), XXXXX... (Ex. device B),  
XXXXX... (Ex. device C). Which  
device please?”  
*
8. Say: [Beep] “X” (Say the number of  
the device to be edited.)  
9. Prompt: “New name please?”  
10. Say:[Beep] “XXXXX... (Ex. Device  
C)” (Speak a “device tag” an arbitrary  
name for the device.)  
* Depending on the mode selected, the  
indication changes.  
11. Prompt: “XXXXX... (Ex. device C)  
(Device tag), is this correct?”  
12. Say: [Beep] “Yes”  
13. Prompt: “New name saved.”  
5-75  
Interior Features  
Bluetooth®  
2. Turn the audio control dial and select a  
desired mode.  
NOTE  
If a Bluetooth® device has already been  
l
paired to the vehicle as a Hands-Free  
mobile phone, it does not need to be paired  
again when using the device as a  
Bluetooth® audio device. Conversely, it  
does not need to be paired again as a  
Hands-Free mobile phone if it has already  
been paired as a Bluetooth® audio device.  
Device registration can also be done using  
voice recognition.  
l
Concerning the operation of a Bluetooth®  
audio device itself, refer to its instruction  
manual.  
Some Bluetooth® audio devices have PIN  
codes (four digits). Refer to the audio  
device's instruction manual because the  
pairing procedure differs depending on  
whether it has a PIN code or not.  
Display  
PAIR  
DEVICE  
Mode  
Function  
Pairing mode Bluetooth® audio device pairing  
Changing link to  
Link change  
LINK  
CHANGE mode  
Bluetooth® audio  
device  
Pairing a Bluetooth® audio device  
which has a four-digit PIN code  
Deleting link to  
Bluetooth® audio  
device  
PAIR Pairing  
DELETE deletion mode  
Device  
DEVICE  
Displaying vehicle's  
1. Using the audio control dial, select the  
pairing mode “PAIR DEVICE” in the  
“BT SETUP” mode. (Refer to  
“Bluetooth® audio device set-up” for  
details.)  
information  
INFO  
Bluetooth® unit  
display mode information  
3. Press the audio control dial to  
determine the mode.  
Bluetooth® audio device pairing  
2. Press the audio control dial to  
determine the mode. After “ENTER  
PIN” is displayed on the audio display  
for three seconds, “PIN 0000” is  
displayed and the PIN code can be  
input.  
Any Bluetooth® audio device must be  
paired to the vehicle's Bluetooth® unit  
before it can be listened to over the  
vehicle's speakers.  
A maximum of seven devices including  
Bluetooth® audio devices and Hands-Free  
mobile phones can be paired to one  
vehicle.  
5-76  
Interior Features  
Bluetooth®  
3. Input the PIN code of your Bluetooth®  
audio device by pressing channel  
preset buttons 1 to 4 while “PIN 0000”  
is displayed.  
NOTE  
Some Bluetooth® audio devices need a  
l
certain amount of time before the symbol  
is displayed.  
l
l
Press channel preset button 1 to input  
the first digit, 2 for the second, 3 for  
the third, and 4 for the forth. For  
example, if the PIN code were “4213”  
press channel preset button 1 four  
times (1, 2, 3, 4), button 2 twice (1, 2),  
button 3 once (1), and button 4 three  
times (1, 2, 3). If the “PIN 0000”  
display disappears before finishing the  
PIN code input, repeat the procedure  
from Step 1.  
If the pairing failed, “Err” flashes for three  
seconds .  
Pairing cannot be performed while the  
vehicle is moving. If you attempt to perform  
pairing while the vehicle is moving, “PAIR  
DISABLE” is displayed .  
If seven Bluetooth® audio devices have  
already been paired to the vehicle, pairing  
cannot be performed and “MEMORY  
FULL” is displayed. Delete one paired  
device to pair another one.  
l
Pairing a Bluetooth® audio device  
which does not have a four-digit PIN  
code  
NOTE  
Some devices accept only a particular pairing  
code (Usually, “0000” or “1234”).  
If pairing cannot be completed, refer to the  
owner's manual of your mobile device, and try  
those numbers if necessary.  
1. Using the audio control dial, select the  
pairing mode “PAIR DEVICE” in the  
“BT SETUP” mode. (Refer to  
4. Press the audio control dial while the  
input PIN code is displayed.  
“PAIRING” flashes on the audio  
display.  
5. Operate the Bluetooth® audio device  
and set it to the pairing mode while  
“PAIRING” is flashing.  
“Bluetooth® audio set up” for details.)  
2. Press the audio control dial to  
determine the mode. After “ENTER  
PIN” is displayed on the audio display  
for three seconds, “PIN 0000” is  
displayed and the PIN code can be  
input.  
6. When the pairing is completed, and  
“PAIR SUCCESS” are displayed after  
about 10-30 seconds, after which  
3. Press the audio control dial while “PIN  
0000” is displayed. “PAIRING” flashes  
on the audio display.  
“PAIR SUCCESS” continues to be  
displayed for three seconds, and then  
the unit returns to the normal display.  
4. Operate the Bluetooth® audio device  
and set it to the pairing mode while  
“PAIRING” is flashing.  
5. As the Bluetooth® audio device  
requires a PIN code, input “0000”.  
5-77  
Interior Features  
Bluetooth®  
6. When the pairing is completed, and  
“PAIR SUCCESS” are displayed after  
about 10-30 seconds, after which  
3. The name of the currently linked  
Bluetooth® audio device is displayed.  
If no Bluetooth® audio device is  
currently linked, the name of the first  
device among the paired devices is  
displayed.  
“PAIR SUCCESS” continues to be  
displayed for three seconds, and then  
the unit returns to the normal display.  
NOTE  
4. Turn the audio control dial to select the  
name of the device you would like to  
link.  
l
If pairing cannot be completed, try “1234”  
instead. Refer to the owner's manual of  
your mobile device for the right PIN code.  
Some Bluetooth® audio devices need a  
l
certain amount of time before the symbol  
is displayed.  
If the pairing failed, “Err” flashes for three  
Device name 1  
Device name 2  
Device name 3  
l
seconds.  
l
Pairing cannot be performed while the  
vehicle is moving. If you attempt to perform  
pairing while the vehicle is moving, “PAIR  
DISABLE” is displayed .  
Device name 4  
Device name 5  
If seven Bluetooth® audio devices have  
l
already been paired to the vehicle, pairing  
cannot be performed and “MEMORY  
FULL” is displayed. Delete one paired  
device to pair another one.  
Device name 6  
Device name 7  
Device selection  
If several devices have been paired, the  
Bluetooth® unit links the device last  
paired. If you would like to link a  
different paired device, it is necessary to  
change the link. The order of device  
priority after the link has been changed is  
maintained even when the ignition is  
switched off.  
5. Press the audio control dial to select the  
device you would like to link. The  
symbol disappears, and “PAIRING”  
flashes in the audio display.  
1. Using the audio control dial, select the  
link change mode “LINK CHANGE”  
in the “BT SETUP” mode. (Refer to  
“Bluetooth® audio device set-up” for  
details.)  
NOTE  
When “GO BACK” is selected and the audio  
control dial is pressed, the display returns to  
“LINK CHANGE”.  
2. Press the audio control dial to  
determine the mode.  
5-78  
Interior Features  
Bluetooth®  
6. If the link to the desired device is  
successful, the symbol is displayed  
again, together with “LINK  
2. Press the audio control dial to  
determine the mode.  
3. The name of the first device among the  
paired devices is displayed.  
CHANGED”. “LINK CHANGED” is  
displayed for three seconds, then it  
returns to the normal display.  
4. Rotate the audio control dial and select  
the name of the paired device you  
would like to delete.  
NOTE  
Some Bluetooth® audio devices need a  
l
certain amount of time before the symbol  
is displayed.  
l
Device name 1  
Device name 2  
Device name 3  
If a Hands-Free type mobile phone has  
been the most recently paired device, the  
Bluetooth® unit links this device. If you  
would like to use a Bluetooth® audio type  
device which has been previously paired to  
the Bluetooth® unit, the link must be  
changed to this device.  
l
Device name 4  
Device name 5  
If an error occurs while trying to link a  
device, “Err” flashes in the audio display  
for three seconds, and the display returns to  
“LINK CHANGE”. If this occurs, check the  
pairing status of the Bluetooth® audio  
device and the location of the device in the  
vehicle (not in the luggage compartment or  
a metal-type box), and then try the link  
operation again.  
Device name 6  
Device name 7  
l
Device selection can also be done using  
voice recognition.  
How to confirm the device currently  
linked  
NOTE  
Only the names of paired devices can be  
displayed. If only one device is paired, only the  
name for this device is displayed.  
Switch to the link-change mode. (Refer to  
“Changing the link to a Bluetooth® audio  
device”)  
5. If a selection other than “GO BACK”  
is made and the audio control dial is  
pressed, “SURE ? NO” is displayed.  
The device name displayed first is the  
device which is currently linked.  
Deleting a device  
6. Rotate the audio control dial clockwise  
and switch the display to “SURE ?  
YES”.  
1. Using the audio control dial, select the  
pairing delete mode “PAIR DELETE”  
in the “BT SETUP”mode. (Refer to  
“Bluetooth® audio device set-up” for  
details.)  
5-79  
Interior Features  
Bluetooth®  
NOTE  
4. Rotate the audio control dial to select  
the information for the Bluetooth® unit  
which you would like to view.  
The display changes as follows depending on  
whether the audio control dial is rotated  
clockwise or counterclockwise.  
_
_
Clockwise: “SURE ? YES” displayed  
Counterclockwise: “SURE ? NO” displayed  
Device name  
BT address  
7. Press the audio control dial to delete  
the selected device.  
NOTE  
Select “GO BACK” and press the audio  
control dial to return to the “PAIR DELETE”  
display.  
8. “PAIR DELETED” is displayed for  
three seconds after the deletion is  
completed, and then it returns to the  
normal display.  
NOTE  
When “GO BACK” is selected and the audio  
control dial is pressed, the display returns to  
“DEVICE INFO”.  
NOTE  
If an error occurs while trying to delete the  
paired device, “Err” flashes in the display for  
three seconds and the display returns to  
“LINK DELETE”.  
qAvailable Language (Type A)  
The available languages are English,  
Spanish, and Canadian French. If the  
language setting is changed, all of the  
voice guidance and voice input  
commands are done in the selected  
language.  
Bluetooth® audio device information  
display  
1. Using the audio control dial, select the  
pair device information display mode  
“DEVICE INFO” in the “BT SETUP”  
mode. (Refer to “Bluetooth® audio  
device set-up” for details.)  
NOTE  
l
If the language setting is changed, device  
registration is maintained.  
l
Phonebook records are not cleared, but  
2. Press the audio control dial to  
determine the mode.  
3. The name of the Bluetooth® unit  
device is displayed.  
each language has a separate phonebook.  
Therefore, entries created in one language  
will need to be re-entered in the phonebook  
of the new language.  
l
Do these steps before you start driving.  
These less used functions are too  
distracting to undertake while driving until  
you are fully familiar with the system.  
5-80  
Interior Features  
Bluetooth®  
(Method 1)  
3. Prompt: “Would you like to change  
the language to French (Desired  
language)?”  
1. Press the pick-up button or talk button  
with a short press.  
4. Say: [Beep] “Yes”  
2. Say:[Beep] “Setup”  
5. Prompt: “Please wait. Switching to  
French phonebook. French selected”  
(Spoken in the newly selected  
language).  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
4. Say: [Beep] “Language”  
qVoice Recognition (Type A)  
5. Prompt: “Select a language: English,  
French, or Spanish.”  
In this section, the basic operation of the  
voice recognition is explained.  
6. Say: [Beep] “French” (Speak the  
desired language: “English”, “French”  
or “Spanish”)  
Activating Voice Recognition  
To Activate the Main Menu: Press the  
pick-up button or talk button with a short  
press.  
NOTE  
Other language settings can also be made  
while in the current setting by saying the name  
of the language in the native pronunciation.  
Ending Voice Recognition  
Use one of the following methods:  
l
Press and hold the talk-button.  
Press the hang-up button.  
l
7. Prompt:“French (Desired language)  
selected. Is this correct?”  
Skipping Voice Guidance (for faster  
operation)  
8. Say:[Beep] “Yes”  
Press and release the talk-button.  
9. Prompt: “French (Desired language)  
selected” (Spoken in the newly selected  
language).  
NOTE  
The Bluetooth® Hands-Free system is  
l
operable several seconds after the ignition  
is switched to ACC or ON (requires less  
than 15 seconds).  
(Method 2)  
1. Press the pick-up button or talk button  
with a short press.  
l
When operating the audio unit or the A/C  
while using Bluetooth® Hands-Free, the  
beep sounds or voice guidance (audio unit)/  
cannot be heard.  
2. Say: [Beep] “French” (Say the desired  
language: “English”, “French” or  
“Spanish”). (Change the desired  
language by saying the language  
name.)  
NOTE  
Other language settings can also be made  
while in the current setting by saying the name  
of the language in the native pronunciation.  
5-81  
Interior Features  
Bluetooth®  
l
Tutorial  
Dialects or different wording other than  
Hands-Free prompts cannot be  
recognized by voice recognition. Speak  
in the wording specified by the voice  
commands.  
It is not necessary to face the  
microphone or approach it. Speak the  
voice commands while maintaining a  
safe driving position.  
Do not speak too slow or too loud.  
Speak clearly, without pausing between  
words or numbers.  
Close the windows and/or the  
moonroofto reduce loud noises from  
outside the vehicle, or turn down the  
airflow of the air-conditioning system  
while Bluetooth® Hands-Free is being  
used.  
The tutorial explains how to use  
Bluetooth® Hands-Free. To activate the  
tutorial, do the following:  
l
1. Press the pick-up button or talk button  
with a short press.  
2. Say:[Beep] “Tutorial”  
l
l
3. Follow the prompts to receive the  
appropriate voice guidance  
instructions.  
l
Commands useable anytime during  
voice recognition  
“Help” or “Go Back” are commands  
which can be used at anytime during  
voice recognition.  
l
Make sure the vents are not directing  
air up towards the microphone.  
Help function use  
The help function informs the user of all  
the available voice commands under the  
current conditions.  
NOTE  
If the voice recognition performance is not  
satisfactory.  
1. Say: [Beep] “Help”  
Refer to Voice Recognition Learning Function  
(Speaker Enrollment) (Type A) on page 5-84.  
Refer to Troubleshooting on page 5-124.  
2. Follow the prompts to receive the  
appropriate voice guidance  
instructions.  
qSecurity Setting (Type A)  
Returning to previous operation  
If a passcode is set, the system cannot be  
activated unless the passcode is input.  
This command is for returning to the  
previous operation while in the voice  
recognition mode.  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
Say: [Beep] “Go Back”  
To prevent a deterioration in the voice  
recognition rate and voice quality, the  
following points should be observed:  
Passcode setting  
l
The voice recognition cannot be  
1. Press the pick-up button or talk button  
with a short press.  
performed while voice guidance or  
the beep sound is operating. Wait  
until the voice guidance or the beep  
sound is finished before saying your  
commands.  
2. Say:[Beep] “Setup”  
5-82  
Interior Features  
Bluetooth®  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language,passcode, select phone or  
select music player.”  
Canceling the passcode  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
4. Say:[Beep] “Passcode”  
5. Prompt: “Passcode is disabled. Would  
you like to enable it?”  
1. Press the pick-up button or talk button  
with a short press.  
6. Say:[Beep] “Yes”  
2. Say:[Beep] “Setup”  
7. Prompt:“Please say a 4-digit passcode.  
Remember this passcode. It will be  
required to use this system.”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language,passcode, select phone or  
select music player.”  
8. Say: [Beep] “XXXX” (Say a desired 4-  
digit passcode, “PCode”.)  
4. Say:[Beep] “Passcode”  
9. Prompt:“Passcode XXXX (Passcode,  
PCode). Is this correct?”  
5. Prompt:“Passcode is enabled. Would  
you like to disable it?”  
10. Say: [Beep] “Yes”  
6. Say: [Beep] “Yes”  
11. Prompt:“Passcode is enabled.”  
Using Bluetooth® Hands-Free with a  
passcode  
7. Prompt:“Passcode is disabled.”  
Confirmation Prompts  
The confirmation prompt confirms the  
command content to the user before  
advancing to the operation requested by  
the user. When this function is turned on,  
the system reads out the voice input  
command previously received and  
confirms whether the command is correct  
before advancing to the command  
execution.  
1. Press the pick-up button or talk button  
with a short press.  
2. Prompt: “Hands-Free system is  
locked. State the passcode to  
continue.”  
3. Say: [Beep] “XXXX” (Say the set  
passcode “PCode”.)  
When the confirmation prompt function is  
turned on: (Ex. “Calling John's device. Is  
this correct?”)  
When the confirmation prompt function is  
turned off: (Ex. “Calling John's device.”)  
4. If the correct passcode is input, voice  
guidance “XXXXXX... (Ex. “Mary's  
device”) (Device tag) is connected” is  
announced.  
If the passcode is incorrect, voice  
guidance “XXXX (4-digit passcode,  
Pcode) incorrect passcode, please try  
again” is announced.  
NOTE  
If the confirmation prompt function is turned  
off when making an emergency call, the system  
reads out and confirms the command before  
executing it.  
5-83  
Interior Features  
Bluetooth®  
1. Press the pick-up button or talk button  
with a short press.  
When voice recognition learning is  
done for the first time  
2. Say: [Beep] “Setup”  
1. Press the pick-up button or talk button  
with a short press.  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language,passcode, select phone or  
select music player.”  
2. Say: [Beep] “Voice training”  
3. Prompt: “This operation must be  
performed in a quiet environment while  
the vehicle is stopped. See the owner's  
manual for the list of required training  
phrases. Press and release the talk  
button when you are ready to begin.  
Press the hang-up button to cancel at  
any time.”  
4. Say: [Beep] “Confirmation prompts”  
5. Prompt: “Confirmation prompts are  
on/off. Would you like to turn  
confirmation prompts off/on?”  
6. Say: [Beep] “Yes”  
4. Press the talk button with a short press.  
7. Prompt: “Confirmation prompts are  
off/on.”  
5. The voice guidance reads out the voice  
input command number (refer to the  
voice input command list for voice  
recognition learning). (Ex. “Please read  
phrase 1”)  
q
Voice Recognition Learning Function  
(Speaker Enrollment) (Type A)  
The voice recognition learning function  
enables voice recognition appropriate to  
the characteristics of the user's voice. If  
the recognition of the voice input  
commands to the system is not adequate,  
this function can largely improve the  
system's voice recognition of the user. If  
your voice can be recognized sufficiently  
without using this function, you may not  
realize the added benefit of the function.  
To register your voice, the voice input  
command list must be read out. Read out  
the list when the vehicle is parked.  
6. Say: [Beep] “0123456789” (Say the  
voice input command for voice  
recognition learning (1 to 8) according  
to the voice guidance.)  
7. Prompt: “Speaker enrollment is  
complete.”  
NOTE  
If an error occurred in the voice recognition  
learning, re-learning can be done by pressing  
the talk button with a short press.  
Perform the registration in as quiet a place  
as possible (page 5-81). The registration  
must be performed completely. The  
required time is a few minutes. The user  
needs to be seated in the driver's seat with  
the voice input command list for voice  
recognition learning visible.  
Voice recognition re-learning  
If voice recognition learning has already  
been done.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say:[Beep] “Voice training”  
5-84  
Interior Features  
Bluetooth®  
l
3. Prompt: “Enrollment is enabled/  
disabled. Would you like to disable/  
enable or retrain?”  
Do not read out parentheses. “ (” and  
hyphens “ ” are used for separating  
numbers in a phone number.  
_
Ex.  
4. Say: [Beep] “Retrain”  
“ (888) 555-1212” must be spoken “Eight, eight,  
eight, five, five, five, one, two, one, two.”  
5. Prompt: “This operation must be  
performed in a quiet environment while  
the vehicle is stopped. See the owner's  
manual for the list of required training  
phrases. Press and release the talk  
button when you are ready to begin.  
Press the hang-up button to cancel at  
any time.”  
Phrase  
Command  
0123456789  
1
2
3
4
5
6
7
8
(888) 555-1212  
Call  
Dial  
Setup  
Cancel  
Continue  
Help  
6. Press the talk button with a short press.  
7. The voice guidance reads out the voice  
input command number (refer to the  
voice input command list for voice  
recognition learning). (Ex. “Please read  
phrase 1”)  
NOTE  
l
The applicable phrase appears in the audio  
display.  
l
After user voice registration is completed,  
voice guidance “Speaker enrollment is  
complete” is announced.  
8. Say: [Beep] “0123456789” (Say the  
voice input command for voice  
recognition learning (1 to 8) according  
to the voice guidance.)  
Voice recognition learning on/off  
1. Press the pick-up button or talk button  
with a short press.  
9. Prompt: “Speaker enrollment is  
complete.”  
2. Say: [Beep] “Voice training”  
NOTE  
3. Prompt: “Enrollment is enabled/  
disabled. Would you like to disable/  
enable or retrain?”  
If an error occurred in the voice recognition  
learning, re-learning can be done by pressing  
the talk button with a short press.  
4. Say: [Beep] “Disable” or “Enable”  
Voice input command list for voice  
recognition learning  
5. When “Disable” is spoken, the voice  
recognition learning is turned off.  
When “Enable” is spoken, the voice  
recognition learning is turned on.  
When reading out, the following points  
must be observed:  
l
Read out the numbers one at a time  
6. Prompt: “Speaker Enrollment is  
disabled/enabled.”  
correctly and naturally. (For example,  
“1234” must be read out “one, two,  
three, four” not “twelve, thirty four”.)  
5-85  
Interior Features  
Bluetooth®  
8. (Device with Bluetooth® version 2.0)  
Input the displayed 4-digit pairing code  
into the device.  
qBluetooth® Preparation (Type B)  
Device pairing  
To use Bluetooth® audio and Hands-Free,  
the device equipped with Bluetooth® has  
to be paired to the unit using the  
following procedure. A maximum of  
seven devices including Bluetooth® audio  
devices and Hands-Free mobile phones  
can be paired.  
(Device with Bluetooth® version 2.1  
or higher)  
Make sure the displayed 6-digit code  
on the audio is also displayed on the  
device, and touch the  
.
Connection permission and phonebook  
access permission for your mobile  
device may be required depending on  
the mobile device.  
NOTE  
The Bluetooth® system may not operate for 1  
or 2 minutes after the ignition is switched to  
ACC or ON. However, this does not indicate a  
problem. If the Bluetooth® system does not  
connect automatically after 1 or 2 minutes  
have elapsed, make sure that the Bluetooth®  
setting on the device is normal and attempt to  
reconnect the Bluetooth® device from the  
vehicle side.  
9. If pairing is successful, the functions of  
the device connected to Bluetooth® are  
displayed.  
10. (Devices compatible with Mazda E-  
mail/SMS function)  
SMS (Short Message Service)  
messages, and E-mail for the device  
are downloaded automatically. A  
download permission operation for  
your device may be required  
depending on the device.  
Pairing Procedure  
1. Select the  
icon on the home screen  
and display the Settings screen.  
NOTE  
2. Select the  
3. Select  
tab.  
When Call history and messages are  
downloaded automatically, each automatic  
download setting must be on. Refer to  
Communication Settings on page 5-107.  
.
4. Turn the Bluetooth® setting on.  
5. Select to display the  
After a device is registered, the system  
automatically identifies the device. By  
activating Bluetooth® Hands-Free again,  
or by activating Bluetooth® Hands-Free  
first after switching the ignition from OFF  
to ACC, the device connection condition  
is indicated in the center display.  
message and switch to the device  
operation.  
6. Using your device, perform a search  
for the Bluetooth® device (Peripheral  
device).  
7. Select “Mazda” from the device list  
searched by the device.  
5-86  
Interior Features  
Bluetooth®  
IMPORTANT note about pairing and  
automatic reconnection:  
NOTE  
The following functions can be used for the  
Hands-Free or audio.  
l
If pairing is redone on the same  
l
Hands-Free: Phone calls and E-mail/SMS  
mobile phone device, first clear  
“Mazda” displayed on the  
Bluetooth® setting screen of the  
mobile device.  
Audio: Bluetooth® audio, Pandora®, Aha™,  
l
Stitcher™ radio  
Disconnecting a device  
l
When the OS of the device is updated,  
1. Select the  
icon on the home screen  
the pairing information may be deleted.  
If this happens, reprogram the pairing  
information to the Bluetooth® unit.  
and display the Settings screen.  
2. Select the  
3. Select  
tab.  
l
Before you pair your device, make sure  
that Bluetooth® is “ON”, both on your  
.
phone and on the vehicle.  
4. Turn the Bluetooth® setting on.  
Device selection  
5. Select the device name which is  
currently connected.  
If several devices have been paired, the  
Bluetooth® unit links the device last  
paired. If you would like to link a  
different paired device, it is necessary to  
change the link. The order of device  
priority after the link has been changed is  
maintained even when the ignition is  
switched off.  
6. Select  
.
Deleting a device  
Selecting and deleting devices  
1. Select the  
icon on the home screen  
and display the Settings screen.  
Connecting other devices  
2. Select the  
tab.  
1. Select the  
icon on the home screen  
3. Select  
4. Turn the Bluetooth® setting on.  
.
and display the Settings screen.  
2. Select the  
3. Select  
4. Turn the Bluetooth® setting on.  
tab.  
5. Select the device name which you  
would like to delete.  
.
6. Select  
7. Select  
.
5. Select the name of the device you  
would like to connect.  
.
Deleting all devices  
1. Select the icon on the home screen  
6.  
selection  
Connects both devices as Hands-Free  
and Bluetooth® audio.  
selection  
and display the Settings screen.  
2. Select the  
3. Select  
tab.  
.
Connects as a Hands-Free device.  
selection  
.
Connects as Bluetooth® audio.  
4. Select  
5-87  
Interior Features  
Bluetooth®  
5. Select  
.
Skipping Voice Guidance (for faster  
operation)  
6. Select  
Changing PIN code  
PIN code (4 digits) can be changed.  
.
Press and release the talk button.  
Troubleshooting for Voice Recognition  
If you do not understand an operation  
method while in the voice recognition  
mode, say “Tutorial” or “Help”.  
1. Select the  
icon on the home screen  
and display the Settings screen.  
2. Select the  
3. Select  
tab.  
.
Commands useable anytime during  
voice recognition  
.
“Go Back” and “Cancel” are commands  
which can be used at anytime during  
voice recognition.  
4. Select  
5. Select  
.
6. Input the new PIN code to be set.  
7. Select  
Returning to previous operation  
To return to the previous operation, say,  
“Go Back” while in voice recognition  
mode.  
.
qAvailable Language (Type B)  
The Bluetooth® Hands-Free System  
applies to the following languages:  
Cancel  
To put the Bluetooth® Hands-Free system  
in standby mode, say, “Cancel” while in  
voice recognition mode.  
l
English  
Spanish  
French  
l
l
To prevent a deterioration in the voice  
recognition rate and voice quality, the  
following points should be observed:  
Refer to Settings on page 5-49.  
qVoice Recognition (Type B)  
l
The voice recognition cannot be  
In this section, the basic operation of the  
voice recognition is explained.  
performed while voice guidance or  
the beep sound is operating. Wait  
until the voice guidance or the beep  
sound is finished before saying your  
commands.  
Activating Voice Recognition  
Press the talk button.  
l
Phone related commands are available  
Ending Voice Recognition  
only when your phone is connected via  
Bluetooth®. Make sure your phone is  
connected via Bluetooth® before you  
operate phone related voice commands.  
Use one of the following methods:  
l
Press the hang-up button.  
Say, “Cancel”.  
Operate the commander switch or the  
l
l
l
Music play commands, such as Play  
center display (only when vehicle is  
stopped).  
Artist and Play Album can be used  
only in USB audio mode.  
Do not speak too slowly or loudly (no  
l
loud voice).  
5-88  
Interior Features  
Bluetooth®  
l
l
Speak clearly, without pausing between  
words or numbers.  
Dialects or different wording other than  
Hands-Free prompts cannot be  
recognized by voice recognition. Speak  
in the wording specified by the voice  
commands.  
l
l
It is not necessary to face the  
microphone or approach it. Speak the  
voice commands while maintaining a  
safe driving position.  
Close the windows and/or the  
moonroof to reduce loud noises from  
outside the vehicle, or turn down the  
airflow of the air-conditioning system  
while Bluetooth® Hands-Free is being  
used.  
l
Make sure the vents are not directing  
air up towards the microphone.  
NOTE  
If the voice recognition performance is not  
satisfactory.  
Refer to Troubleshooting on page 5-124.  
5-89  
Interior Features  
Bluetooth®  
qAudio Operation Using Voice Recognition (Type B)  
Main audio operation  
The below commands are examples of the available commands.  
When the talk button is pressed and the following command is spoken out, the audio can  
be operated. The commands in the () can be omitted. The specified name and number are  
put into the {}.  
Corresponding audio  
Voice command  
Function  
source  
(Go to/Play) AM (Radio)  
(Go to/Play) FM (Radio)  
Switches the audio source to AM radio.  
Switches the audio source to FM radio.  
All  
All  
(Go to/Play) Bluetooth (Audio) Switches the audio source to Bluetooth® audio.  
All  
(Go to/Play) Pandora  
Switches the audio source to Pandora®.  
Switches the audio source to Aha™  
Switches the audio source to Stitcher™ Radio.  
Switches the audio source to USB 1.  
Switches the audio source to USB 2.  
Plays the selected playlist.  
All  
(Go to/Play) Aha (Radio)  
(Go to/Play) Stitcher  
.
All  
All  
(Go to/Play) USB 1  
All  
(Go to/Play) USB 2  
All  
Play Playlist {Playlist name}  
Play Artist {Artist name}  
Play Album {Album name}  
Play Genre {Genre name}  
Play Folder {Folder name}  
USB  
USB  
USB  
USB  
USB  
Plays the selected artist.  
Plays the selected album.  
Plays the selected genre.  
Plays the selected folder.  
NOTE  
l
Some commands cannot be used depending on devices and use conditions.  
If the Bluetooth® device, USB, or AUX is not connected, the related commands cannot be used.  
l
5-90  

Related Topics

Bluetooth?
Bluetooth? Hands-Free (Type A) Bluetooth? Hands-Free (Type B) Bluetooth? Audio (Type A) Bluetooth? Audio (Type B) Troubleshooting

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot