If Trouble Arises
Flat Tire
Jack*
To secure the jack
▼
1. Insert the wing bolt into the jack with
the jack screw pointing back and turn
the wing bolt clockwise to temporarily
tighten it.
To remove the jack
1. Remove the cover.
2. Turn the jack screw clockwise.
Wing bolt
2. Turn the wing bolt and jack screw
counterclockwise.
Jack screw
3. Turn the wing bolt completely to
secure the jack.
Wing bolt
NOTE
If the jack is not completely secured, it
could rattle while driving. Make sure
the jack screw is sufficiently tightened.
4. Insert the cover tabs and install the
cover.
NOTE
Jack screw
Verify that the cover is securely
installed.
Maintenance
Always keep the jack clean.
Make sure the moving parts are kept
free from dirt or rust.
Make sure the screw thread is
adequately lubricated.
*Some models.
7-4
English 
