Controls
Driving and parking
Automatic engine start (ECO start/
Pulling away
! Change gear in good time and avoid spin-
stop function)
ning the wheels. You could otherwise dam-
! Warm up the engine quickly. Do not use
age the vehicle.
The ECO start/stop function automatically
the engine's full performance until it has
switches on the engine as soon as you pre-
reached operating temperature.
AUTOTRONIC*
pare to pull away, e.g. by engaging a gear.
Only shift into reverse gear when the vehi-
X Depress the clutch pedal.
i It is only possible to move the selector
cle is stationary.
The engine starts automatically.
lever to the desired position if you depress
Where possible, avoid spinning the drive
the brake pedal. Only then is the selector
X Shift to either first or reverse gear and pull
wheels when pulling away on slippery
lever lock released.
away.
roads. You could otherwise damage the
drive train.
X Depress the brake pedal and keep it
! Do not engage a gear without depressing
depressed.
the clutch as this disables the automatic
i The vehicle locks centrally once you have
The selector lever lock is released.
engine start function. As a result, the bat-
pulled away. The locking knobs in the doors
X Release the parking brake.
tery cannot be recharged and the demister
drop down.
function of Thermotronic* is not available.
X Move the selector lever to position D or R.
You can open the doors from the inside at
any time.
i Wait until the shift process is completed
i When manoeuvring in and out of parking
You can also deactivate the automatic lock-
before pulling away.
spaces, the ECO start/stop function will
ing feature ( Y page 111).
not automatically switch off the vehicle's
X Release the brake pedal.
engine. The engine will only be switched off
X Carefully depress the accelerator pedal.
Manual transmission
automatically if the vehicle has reached a
speed of at least 15 km/h before coming
i Upshifts take place at higher engine
X Depress the brake pedal.
to a standstill again.
speeds after a cold start. This helps the
X Depress the clutch pedal.
catalytic converter to reach its operating
X Shift to either first or reverse gear.
i The system can differentiate between
temperature more quickly.
X Release the parking brake ( Y page 90).
starting the engine with the key and the
automatic engine start via the ECO start/
X Slowly release the clutch pedal and
stop function.
depress the accelerator pedal.
Z
* optional
89