2004-2011 Mercedes A Class 4 Door Controls -> Transmission User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Controls -> Transmission for Your Mercedes A Class 4 Door Second Generation (2004-2011)

ControlsTransmissionNeutral Nwith ECO Start-Stop-Func-TransmissionManual transmissiontion*activatedNotes on the transmission5-speed manual transmissionThe transmission must be in neutral N for theG Risk of accidentengine to switch off when:The movement of the pedals must not beX the engine is running below a certainimpaired in any way. Do not keep in the driver's footwell. Make sureX the brake pedal is floormats or carpets are correctlyX the clutch pedal is not and that there is sufficient clear-ance for the reverse gearG Risk of accident! Only engage reverse gear when the vehi-cle is stationary, otherwise the transmis-Do not change down for additional enginesion could be on a slippery road surface. ThisVehicles without ECO Start-Stop-Function* (5-could cause the drive wheels to lose theirspeed manual transmission)X Move the gear lever to the right and thengrip and the vehicle could skid. This you to lose control of your vehicleand cause an with ECO Start-Stop-Function** optional92
Controls
Transmission
Neutral Nwith ECO Start-Stop-Func-
Transmission
Manual transmission
tion*activated
Notes on the transmission
5-speed manual transmission
The transmission must be in neutral N for the
G Risk of accident
engine to switch off when:
The movement of the pedals must not be
X the engine is running below a certain
impaired in any way. Do not keep any
speed.
objects in the driver's footwell. Make sure
X the brake pedal is depressed.
that floormats or carpets are correctly
X the clutch pedal is not depressed.
secured and that there is sufficient clear-
ance for the pedals.
Engaging reverse gear
G Risk of accident
! Only engage reverse gear when the vehi-
cle is stationary, otherwise the transmis-
Do not change down for additional engine
sion could be damaged.
braking on a slippery road surface. This
Vehicles without ECO Start-Stop-Function* (5-
could cause the drive wheels to lose their
speed manual transmission)
X Move the gear lever to the right and then
grip and the vehicle could skid. This could
back.
cause you to lose control of your vehicle
and cause an accident.
Vehicles with ECO Start-Stop-Function*
* optional
92
ControlsTransmission6-speed manual transmissionuse the braking effect of the engine, so lessbraking will be required to prevent the vehi-cle from gaining speed. This relieves theload on the brake system and prevents thebrakes from overheating and wearing reverse gear! Only engage reverse gear when the vehi-cle is stationary, otherwise the transmis-sion could be damaged.1 Upshift indicatorX Pull the gear lever up, move it to the left andVehicles without ECO Start-Stop-Function* (6-X Shift up or down a gear when the corre-then manual transmission)sponding indicator appears in the instru-ment cluster's multi-function display.! When shifting between 5th and 6th gear,Gearshift indicator (BlueEFFI-The shift indicator is meant as a recommen-you should always push the gear lever allCIENCY*vehicles)dation for an economical driving style. How-the way to the right. You could otherwiseever, always observe traffic conditions, asi Observing the gearshift indicator in theshift unintentionally into 3rd or 4th gearyour driving style is determined, in the firstinstrument cluster's multi-function displayand damage the , by the traffic help you to improve the fuel economyDo not exceed the maximum speed for theof your you shift down at too high a speed (trans-mission braking), this can cause the engineto overrev, leading to engine damage.! On long and steep downhill gradients,especially when the vehicle is laden, youmust shift to a lower gear in time. This willZ* optional93
Controls
Transmission
6-speed manual transmission
use the braking effect of the engine, so less
braking will be required to prevent the vehi-
cle from gaining speed. This relieves the
load on the brake system and prevents the
brakes from overheating and wearing too
quickly.
Engaging reverse gear
! Only engage reverse gear when the vehi-
cle is stationary, otherwise the transmis-
sion could be damaged.
1 Upshift indicator
X Pull the gear lever up, move it to the left and
Vehicles without ECO Start-Stop-Function* (6-
X Shift up or down a gear when the corre-
then back.
speed manual transmission)
sponding indicator appears in the instru-
ment cluster's multi-function display.
! When shifting between 5th and 6th gear,
Gearshift indicator (BlueEFFI-
The shift indicator is meant as a recommen-
you should always push the gear lever all
CIENCY*vehicles)
dation for an economical driving style. How-
the way to the right. You could otherwise
ever, always observe traffic conditions, as
i Observing the gearshift indicator in the
shift unintentionally into 3rd or 4th gear
your driving style is determined, in the first
instrument cluster's multi-function display
and damage the transmission.
instance, by the traffic situation.
will help you to improve the fuel economy
Do not exceed the maximum speed for the
of your vehicle.
individual gears.
If you shift down at too high a speed (trans-
mission braking), this can cause the engine
to overrev, leading to engine damage.
! On long and steep downhill gradients,
especially when the vehicle is laden, you
must shift to a lower gear in time. This will
Z
* optional
93
ControlsTransmissionSelector lever positionsAUTOTRONIC* (continuously variableautomatic transmission)Park positionìAUTOTRONIC is an electronically controlled,Prevents the vehicle from rollingcontinuously variable automatic transmis-away when stopped. Only move thesion. The transmission ratio is changed con-selector lever to P when the vehicletinuously. This enables it to be ideally adaptedis your individual driving styles and to provideThe key can only be removed whenincreased driving selector lever is in position P. Ifthe key is removed from the igni-tion lock, the selector lever is1 Drive program (C/S) or (C/S/M)*locked in position P.2 Gear indicatorReverse gearíIf you have selected one-touch gearshifting orOnly move the selector lever to Rselector lever position D, you can see the cur-when the vehicle is engaged gear in the multi-function can influence the AUTOTRONIC trans-mission ratio when the selector lever is inposition D by changing gear yourself―seeOne-touch gearshifting ( Y page 95).* optional94
Controls
Transmission
Selector lever positions
AUTOTRONIC* (continuously variable
automatic transmission)
Park position
ì
AUTOTRONIC is an electronically controlled,
Prevents the vehicle from rolling
continuously variable automatic transmis-
away when stopped. Only move the
sion. The transmission ratio is changed con-
selector lever to P when the vehicle
tinuously. This enables it to be ideally adapted
is stationary.
to your individual driving styles and to provide
The key can only be removed when
increased driving comfort.
the selector lever is in position P. If
the key is removed from the igni-
tion lock, the selector lever is
1 Drive program (C/S) or (C/S/M)*
locked in position P.
2 Gear indicator
Reverse gear
í
If you have selected one-touch gearshifting or
Only move the selector lever to R
selector lever position D, you can see the cur-
when the vehicle is stationary.
rently engaged gear in the multi-function dis-
play.
You can influence the AUTOTRONIC trans-
mission ratio when the selector lever is in
position D by changing gear yourself―see
One-touch gearshifting ( Y page 95).
* optional
94
ControlsTransmissionX To shift down: briefly press the selectorDeactivating manual operationNeutralëlever to the left towards D–.X Press and hold the selector lever towardsNo power is transmitted from theThe transmission shifts down to the nextD+ until D is shown again in the multi-func-engine to the drive wheels. Releas-gear, depending on the gear currentlytion the brakes will allow you transmission shifts from the currentmove the vehicle freely, e.g. togear to it or tow it.i To prevent the engine from overrevving,Or:the transmission does not shift down if youIf ESP ® is deactivated or faulty:push the selector lever towards D– whileX Briefly press the program selector buttononly move the selector lever to N ifdriving at too high a to the selector vehicle is in danger of skidding,The letter for the last selected drive pro-e.g. on icy roads.i AUTOTRONIC shifts down automatically ifgram C or S is shown again in the multi-Driveêthe engine speed reaches the lower speedfunction display. The transmission shiftsThe transmission selects the opti-range for the gear currently the current gear to gear ratio automatically forX To shift up: briefly press the selector leveri If you restart the engine and M manualforward the right towards D+.operation is selected, AUTOTRONIC shiftsThe transmission shifts up to the next gear,into the automatic drive program C or S. IfOne-touch gearshifting (manual opera-depending on the gear currently drive program C or S has beention)selected, the automatic transmission willi If the upper engine speed limit for the gearWhen the selector lever is in position D, youresume the relevant drive program whencurrently engaged is reached and you con-can select the seven gears restart the to accelerate, AUTOTRONIC shifts manual operationX Press the selector lever lightly to the leftX To select the ideal g
Controls
Transmission
X To shift down: briefly press the selector
Deactivating manual operation
Neutral
ë
lever to the left towards D–.
X Press and hold the selector lever towards
No power is transmitted from the
The transmission shifts down to the next
D+ until D is shown again in the multi-func-
engine to the drive wheels. Releas-
gear, depending on the gear currently
tion display.
ing the brakes will allow you to
selected.
The transmission shifts from the current
move the vehicle freely, e.g. to
gear to D.
push it or tow it.
i To prevent the engine from overrevving,
Or:
the transmission does not shift down if you
If ESP ® is deactivated or faulty:
push the selector lever towards D– while
X Briefly press the program selector button
only move the selector lever to N if
driving at too high a speed.
next to the selector lever.
the vehicle is in danger of skidding,
The letter for the last selected drive pro-
e.g. on icy roads.
i AUTOTRONIC shifts down automatically if
gram C or S is shown again in the multi-
Drive
ê
the engine speed reaches the lower speed
function display. The transmission shifts
The transmission selects the opti-
range for the gear currently selected.
from the current gear to D.
mum gear ratio automatically for
X To shift up: briefly press the selector lever
i If you restart the engine and M manual
forward mode.
to the right towards D+.
operation is selected, AUTOTRONIC shifts
The transmission shifts up to the next gear,
into the automatic drive program C or S. If
One-touch gearshifting (manual opera-
depending on the gear currently selected.
automatic drive program C or S has been
tion)
selected, the automatic transmission will
i If the upper engine speed limit for the gear
When the selector lever is in position D, you
resume the relevant drive program when
currently engaged is reached and you con-
can select the seven gears yourself.
you restart the engine.
tinue to accelerate, AUTOTRONIC shifts up
automatically.
Activating manual operation
X Press the selector lever lightly to the left
X To select the ideal gear: press and hold
towards D- or to the right towards D+.
the selector lever to the left towards D–.
M is shown in the multi-function display.
The transmission will shift to a range which
Manual operation is activated.
allows ideal acceleration and deceleration.
To do this, the transmission will shift down
Z
one or more gears.
95
ControlsTransmissionProgram selector buttonTrailer towingR the vehicle pulling away more gently inforward and reverse gears, unless theX Drive in the middle of the engine speedThe button is on the lower section of theaccelerator pedal is depressed on uphill console.R an increase in traction: this improves theX Shift down to 3rd or 2nd gear dependingdriving stability of the vehicle on slipperyon the incline of the uphill or downhill gra-road surfaces, for ( Y page 95), even if cruise control isactivated.R the transmission shifting up sooner: thevehicle is driven at lower engine speedsWorking on the vehicleand the wheels are less likely to spin.G Risk of accidentApply the handbrake and move the selectorDriving tipslever to P when working on the pedal positionOtherwise, the vehicle could roll style of driving influences how AUTO-1 Program selector buttonTRONIC shifts gear:R little throttle: early upshiftsC Comfortcomfortable driving styleR more throttle: late upshiftsS Sportsporty driving styleKickdownThe selected drive program (C/S) is shown inUse kickdown for maximum multi-function display ( Y page 94).X Depress the accelerator pedal beyond theX Press program selector button 1 repeat-pressure until the letter for the desired driveThe transmission shifts to a lower gearprogram appears in the multi-function dis-depending on the engine ( Y page 94).X Ease off the accelerator pedal once theComfort mode C is characterised by the fol-desired speed is :The transmission shifts back up.96
Controls
Transmission
Program selector button
Trailer towing
R the vehicle pulling away more gently in
forward and reverse gears, unless the
X Drive in the middle of the engine speed
The button is on the lower section of the
accelerator pedal is depressed fully.
range on uphill gradients.
centre console.
R an increase in traction: this improves the
X Shift down to 3rd or 2nd gear depending
driving stability of the vehicle on slippery
on the incline of the uphill or downhill gra-
road surfaces, for example.
dient( Y page 95), even if cruise control is
activated.
R the transmission shifting up sooner: the
vehicle is driven at lower engine speeds
Working on the vehicle
and the wheels are less likely to spin.
G Risk of accident
Apply the handbrake and move the selector
Driving tips
lever to P when working on the vehicle.
Accelerator pedal position
Otherwise, the vehicle could roll away.
Your style of driving influences how AUTO-
1 Program selector button
TRONIC shifts gear:
R little throttle: early upshifts
C Comfort
comfortable driving style
R more throttle: late upshifts
S Sport
sporty driving style
Kickdown
The selected drive program (C/S) is shown in
Use kickdown for maximum acceleration.
the multi-function display ( Y page 94).
X Depress the accelerator pedal beyond the
X Press program selector button 1 repeat-
pressure point.
edly until the letter for the desired drive
The transmission shifts to a lower gear
program appears in the multi-function dis-
depending on the engine speed.
play ( Y page 94).
X Ease off the accelerator pedal once the
Comfort mode C is characterised by the fol-
desired speed is reached.
lowing:
The transmission shifts back up.
96

Related Topics

Popular Owner Manuals