DYNAMIC SELECT button (all vehicles
except Mercedes-AMG vehicles)
Use the DYNAMIC SELECT button to change the
drive program. Depending on the drive program
selected, the following vehicle characteristics
will change:
R
The drive (engine and transmission manage-
ment)
R
the suspension (vehicles with adjustable
damping or AMG RIDE CONTROL)
R
the steering
R
the availability of the ECO start/stop function
R
the climate control
If the ignition is switched off for less than four
hours, the previously selected drive program is
activated when the engine is next started. If the
ignition is switched off for more than four hours,
drive program C is activated when the engine is
next started.
X
Press DYNAMIC SELECT controller : as
many times as necessary until the desired
drive program is selected.
The selected drive program appears in the
multifunction display. After five seconds the
display goes out and the status icon of the
selected drive program appears.
In addition, the current drive program settings
are shown briefly on the display of the multi-
media system.
i
In a few countries, the ECO start/stop func-
tion is deactivated at the factory due to the
quality of the available fuel. In this case, the
ECO start/stop function is not available in any
drive program, regardless of what is shown on
the multimedia system display.
Available drive programs:
C Comfort Comfortable and economi-
cal driving characteristics
S Sport Sporty driving characteris-
tics
I Individual Individual settings
E Economy Particularly economical
driving characteristics
Additional information on drive programs
(Y page 148).
You can also change gear yourself using the
steering wheel gearshift paddles. Further infor-
mation on manual gearshifting (Y page 150).
DYNAMIC SELECT controller
(Mercedes-AMG vehicles)
Use the DYNAMIC SELECT controller to change
the drive program. Depending on the drive pro-
gram selected, the following vehicle character-
istics will change:
R
the drive
R
the transmission management
R
ESP
®
R
the suspension (vehicles with AMG RIDE
CONTROL)
R
the availability of the ECO start/stop function
R
the availability of gliding mode
If the ignition is switched off for less than four
hours, the previously selected drive program is
activated when the engine is next started. If the
ignition is switched off for more than four hours,
drive program C is activated when the engine is
next started.
DYNAMIC SELECT controller (Mercedes-AMG vehicles)
141
Driving and parking
Z
English 
