2025-2026 Mercedes G Class SUV MBUX multimedia system -> Overview and operation User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

MBUX multimedia system -> Overview and operation for Your Mercedes G Class SUV Fifth Generation (2025-2026)

410
Overview and operation
Overview of the MBUX multimedia system
&
WARNING
Risk of distraction from information systems and communications
equipment
If you operate information systems and communication devices integra‐
ted in the vehicle when driving, you could be distracted from the traffic
situation. This could also cause you to lose control of the vehicle.
#
Only operate this equipment when the traffic situation per‐
mits.
#
If you cannot be sure of this, stop the vehicle whilst paying
attention to road and traffic conditions and operate the equip‐
ment with the vehicle stationary.
You must observe the legal requirements for the country in which you are
currently driving when operating the multimedia system.
*
NOTE
Increased surface temperature due to direct sunlight on the cen‐
tral display
The surface of the central display is very dark.
If the display is exposed to direct sunlight, the surface can become very
hot.
#
If the central display has been exposed to direct sunlight,
allow it to cool down before touching it for a long time.
%
THE FUNCTIONS OF YOUR MBUX MULTIMEDIA SYSTEM MAY
DIFFER AND DEPEND ON THE FOLLOWING FACTORS:
R
Market
R
National version
R
Technical conditions
Functions and Digital Extras provided by Mercedes-Benz and/or
third-party providers may no longer be available when the con‐
tractual period expires. This may also be due to technical pre-
requisites. There is therefore no entitlement to the continuous
provision of functions and Digital Extras.
The described functions may be modified, optimised and adap‐
ted after the time of going to press.
G-Class - Owner's Manual
MBUX multimedia system Overview and operation
F465 0034 02
411
Mercedes-Benz therefore reserves the right to introduce changes
to functions and Digital Extras.
For these reasons, descriptions and depictions relating to the
MBUX multimedia system may, in some cases, differ for your
vehicle.
1 Touch Control and control panel for the MBUX multimedia system
MBUX stands for Mercedes-Benz User Experience.
• Operating Touch Control (/page412)
2 Media display with touch functionality
• Home screen overview (/page412)
• Operating the touchscreen (/page413)
3 Touchpad
Operating the touchpad (/page414)
4 Controller
Turn: adjusts the volume
Press briefly: switches the mute function on/off
Press and hold: switches the MBUX multimedia system or media display on
or off
5 Buttons for navigation z, radio/media | and configuring charging
settings û
6 Button for vehicle functions y and favourites button ß
%
Alternatively, the MBUX Voice Assistant allows voice dialogue.
Operation with natural speech starts after the wake-up call "Hey
Mercedes" (/page400). You can start a voice navigation, for
example.
%
If the vehicle is fitted with the MBUX Interior Assistant, selec‐
ted functions of the multimedia system can be operated contact-
free. In addition, the reading light or search light can be switched
on or off contact-free.
Numerous apps and Digital Extras are available to you. These can be called up
via the home screen.
You can conveniently call up your favourites using the ß button on the
steering wheel. Quick-access in the home screen and in the applications serve
to select functions more quickly.
If you use the learning function of the multimedia system, you will receive
suggestions during operation of the most probable navigation destinations,
media sources, radio stations and contacts. The configuration of the sugges‐
tions is completed in the system settings. You can compile your user profile
from various vehicle settings and settings of the multimedia system. Some
functions and Digital Extras are protected by a PIN. You can teach in biometric
procedures to identify yourself with these instead of the four-digit Mercedes
me ID PIN.
G-Class - Owner's Manual
MBUX multimedia system Overview and operation
F465 0034 02
412
The Notifications Centre collects incoming notifications, e.g. about an availa‐
ble software update. Depending on the type of notification it offers various
actions. The call is made via the Control Centre.
With the global search, you can search on the home screen via categories, e.g.
in the navigation, and on the Internet.
ANTI-THEFT PROTECTION
This device is equipped with technical provisions to protect it against theft.
More detailed information about anti-theft protection can be obtained at a
qualified specialist workshop.
Home screen overview
1 On the home screen: displays the first three applications
In other displays: calls up the home screen
2 Calls up user profile settings and switches user
3 Using the global search
4 Calls up the Control Centre: pull the bar down
5 Calls up favourites
6 Displays in the status line
7 Calls up applications
8 Quick-access to application
9 Index points for selected display area
A Calling up the air-conditioning menu
THE FOLLOWING FUNCTIONS ARE CALLED UP IN THE CONTROL CENTRE:
R
Notifications Centre
R
Favourites
R
Vehicle quick-access
In the image, the applications are arranged as a carousel. Pressing and holding
on © arranges the applications in a grid. This view is also used by a smart‐
phone, for example.
Touch Control
OPERATING TOUCH CONTROL (MBUX MULTIMEDIA SYSTEM)
1 © Shows the home screen
2 Touch Control
=9Ì: swipe in the direction of the arrow (navigate)
a Press (confirm)
3 G Returns to the previous display
G-Class - Owner's Manual
MBUX multimedia system Overview and operation
F465 0034 02
413
4 6 Makes or accepts a call
5 ~ Rejects or ends a call
6 To increase volume: swipe upwards
To reduce volume: swipe down
8 To switch off the sound: press
7 ß Calls up favourites
8 £ Starts the MBUX Voice Assistant
%
To operate Touch Control 2 in the most effective way, use the
tip of your thumb if possible.
You can navigate through menus and lists via the touch-sensitive surface of
Touch Control 2 using a single-finger swipe, e.g.:
#
To enter a character: select a character using the keyboard and press
on Touch Control
2.
#
To select a menu option: scroll in a list and press Touch Control 2.
#
To move the digital map: swipe in any direction.
SETTING THE SENSITIVITY FOR TOUCH CONTROL
Multimedia system:
4
©
5
Settings
5
System
5
Control elements
5
Touch Control sensitivity
#
Select Fast, Medium or Slow.
SETTING ACOUSTIC OPERATIONAL FEEDBACK FOR ALL CONTROL ELE‐
MENTS
Multimedia system:
4
©
5
Settings
5
System
5
Control elements
5
Acoustic feedback
The function is supported by the selection in a list.
#
Set Off, Unleaded or Loud.
If the function is activated you will hear a clicking sound when selecting
control elements or when scrolling in a list. When the beginning or end
of the list is reached you will hear another clicking sound.
Touchscreen
OPERATING THE TOUCHSCREEN
TAPPING
#
To select a menu item or entry: tap on a symbol or an entry.
#
To increase the map scale: tap twice quickly with one finger.
#
To reduce the map scale: tap with two fingers.
#
To enter characters with the keypad: tap on a button.
SINGLE-FINGER SWIPE
#
To navigate in menus: swipe up, down, left or right.
#
To move the digital map: swipe in any direction.
#
To use handwriting to enter characters: write the character with one
finger on the touchscreen.
G-Class - Owner's Manual
MBUX multimedia system Overview and operation
F465 0034 02
414
TWO-FINGER SWIPE
#
To zoom in and out of the map: move two fingers together or apart.
#
To enlarge or reduce the size of a section of a website: move two
fingers together or apart.
#
To turn the map: turn anti-clockwise or clockwise using two fingers.
THREE-FINGER SWIPE
#
To call up the home screen: swipe up with three fingers in an applica‐
tion.
TOUCHING, HOLDING AND MOVING
#
To move the map: touch the touchscreen and move your finger in any
direction.
#
To set the volume on a scale: touch the touchscreen and move your
finger to the left or right.
TOUCHING AND HOLDING
#
To save the destination in the map: touch the touchscreen and hold
until a message is shown.
#
To call up a global menu in the applications: touch the touchscreen
and hold until the
Options menu appears.
Touchpad
OPERATING THE TOUCHPAD
1 G button
Returns to the previous display
2 ~ button
Calls up the control menu of the last active audio source
3 © button
Shows the home screen and calls up applications
4 Turn: adjusts the volume
Press briefly: switches the mute function on/off
Press and hold: switches the MBUX multimedia system or media display on
or off
5 Calls up navigation or the map
6 Calls up radio or media
7 Calls up the EQ menu
8 Calls up favourites
9 Calls up vehicle functions
G-Class - Owner's Manual
MBUX multimedia system Overview and operation
F465 0034 02
415
#
To enter a character: enter a character using the keyboard.
or
#
Write a character on the touch-sensitive surface of the touch‐
pad.
SELECTING A MENU ITEM OR ENTRY WITH ONE-FINGER SWIPES
#
Swipe up, down, left or right.
#
Press the touchpad.
MOVING THE DIGITAL MAP
#
Swipe in any direction.
USE THE FOLLOWING FUNCTIONS WITH A TWO-FINGER SWIPE:
#
To call up the Notifications Centre: swipe down with two fingers.
#
To close the Notifications Centre: swipe up with two fingers.
#
To call up the control menu of the last active audio source: swipe up
with two fingers.
#
To zoom in and out of the map: move two fingers together or apart.
#
To enlarge or reduce the size of a section of a website: move two
fingers together or apart.
SETTING THE SENSITIVITY FOR THE TOUCHPAD
Multimedia system:
4
©
5
Settings
5
System
5
Control elements
#
Select Sensitivity.
#
Select Fast, Medium or Slow.
#
To set the pressure sensitivity: switch Touchpad tap on or off.
If the function is switched on, a tap on the touchpad is enough to select
a menu item.
ACTIVATING OR DEACTIVATING HAPTIC OPERATING FEEDBACK FOR THE
TOUCHPAD
Multimedia system:
4
©
5
Settings
5
System
5
Control elements
The function supports you when making entries on the touchpad and when
selecting menus.
#
Switch Haptic feedback on or off.
When the function is activated, a tactile feedback in the form of a
vibration is effected when the touchpad is operated.
SELECTING A STATION AND TRACK USING THE TOUCHPAD
#
Press the ~ button on the touchpad.
The control menu appears for the audio source that was last selected.
#
Swipe left or right using one finger.
Radio: the previous or next station is set.
Media source: the previous or next track is selected.
#
To hide the control menu: press the ~ button on the touchpad.
G-Class - Owner's Manual
MBUX multimedia system Overview and operation
F465 0034 02
416
User profiles
NOTES ON USER PROFILES
&
WARNING
Risk of becoming trapped during adjustment of the driver's seat
after calling up a driver profile
Selecting a user profile may trigger an adjustment of the driver's seat
to the position saved under the user profile. You or other vehicle occu‐
pants could be injured in the process.
#
Make sure that when the position of driver's seat is being
adjusted using the multimedia system, no people or body
parts are in the seat's range of movement.
If there is a risk of someone becoming trapped, immediately stop the
adjustment process by:
#
a) Tapping the warning message on the central display.
or
#
b) Pressing a position button of the memory function or a seat
adjustment switch in the driver's door.
The adjustment process is stopped.
The electrically adjustable driver's seat is equipped with an automatic revers‐
ing function.
If the driver's door is open, the driver's seat will not be set after calling up the
driver's profile.
OVERVIEW OF USER PROFILES
REQUIREMENTS FOR USE
R
You have registered with a Mercedes me ID and confirmed the terms of
use.
R
Your Mercedes me ID is linked to the vehicle.
R
You have a Mercedes me ID PIN.
%
If one of the pre-requisites listed is missing or if no user profile
has been selected, the data described in the following section
will be saved in the vehicle as the standard setting. Standard
settings can be changed by all vehicle users.
User profiles save personal settings. If the vehicle is used by several people, a
person can change their profile settings without changing the settings of other
users.
You can individualise a user profile in the vehicle using the set-up assistant
or using the settings in your user profile. Some settings, e.g. the Mercedes me
ID PIN and a profile photo, are made in the Mercedes-Benz App or on the
Mercedes-Benz website.
%
If the user profile is downloaded while travelling, user profiles
are not set up using the set-up assistant.
User-specific content and applications with personal data are protected by
different levels of security (/page418).
To access protected content, the Mercedes me ID PIN and, depending on the
vehicle equipment, biometric sensors are used.
G-Class - Owner's Manual
MBUX multimedia system Overview and operation
F465 0034 02
417
%
The security level is set by the multimedia system and calculated
from the combination of all sensor inputs. Some security levels
cannot be turned off.
%
WHEN A USER PROFILE IS ACTIVATED, THE FOLLOWING
PERSONALISED COMFORT SYSTEMS, FOR EXAMPLE, CAN BE
ADJUSTED OR THEIR SETTINGS LOADED:
R
Seat
R
Ambient light
R
Outside mirrors
R
Air-conditioning settings
If the user profile is activated when driving then the driver's seat
position will not be adjusted.
USER-SPECIFIC CONTENT
DEPENDING ON THE VEHICLE EQUIPMENT YOU CAN, AS A USER, SAVE
THE FOLLOWING SETTINGS, FOR EXAMPLE:
R
Driver's seat, steering wheel and mirror settings
R
Climate control
R
Ambient light
R
Radio (including station list)
R
Suggestions and favourites
You can watch an animation on this topic via the following link:
ADDING A USER
Requirements:
R
The vehicle is stationary.
Multimedia system:
4
©
5
f
5
Select user
#
Select fAdd user.
A QR code is loaded.
#
Scan the displayed QR code with the Mercedes-Benz App or any QR
code scanner on a mobile device. If the Mercedes-Benz App is not yet
installed on your mobile device, you will be directed to the store on your
mobile device.
#
Follow the steps in the Mercedes-Benz App.
The vehicle is linked to your Mercedes me ID. This automatically creates
your user profile in the vehicle.
You will be informed when your user profile is available.
When the vehicle is stationary, the set-up assistant starts automatically
after user selection.
%
When the user has been added, they can be selected
(/page420).
G-Class - Owner's Manual
MBUX multimedia system Overview and operation
F465 0034 02
418
SELECTING USER OPTIONS
Multimedia system:
4
©
5
f
5
Settings
PROTECTING USER-SPECIFIC CONTENT AND APPLICATIONS
If you add a new user, access protection is already activated for the user
profile. The Mercedes me ID PIN and, depending on the vehicle equipment,
biometric sensors are available for access. Biometric sensors in the vehicle
must be taught in. The authentication process then takes all taught-in and
available sensors into account.
THE FOLLOWING USER-SPECIFIC CONTENT AND APPLICATIONS ARE PRO‐
TECTED, FOR EXAMPLE:
R
User selection and user profile settings
R
Biometric sensors
The teaching-in of biometric sensors
For teaching in and editing biometric recognition see the following sec‐
tion.
R
Suggestions
The data and determination of the most probable navigation destina‐
tions, media sources, radio stations, contacts and messages.
R
ENERGIZING COACH
The recorded health data and its evaluation.
R
In-Car Office
The calendar, the tasks and the e-mails.
R
Parking service
The payment transactions.
R
Mercedes-Benz Store
The purchase of Digital Extras
R
System activations of paid vehicle functions
IN THE FOLLOWING CASES YOU WILL BE PROMPTED FOR AUTHENTICA‐
TION OR RE-AUTHENTICATION USING A SENSOR OR THE MERCEDES ME
ID PIN:
R
When selecting a protected user profile
R
When calling up a function requiring special protection
R
If biometric sensors provide insufficient or contradictory information
R
If the multimedia system no longer trusts a sensor
R
If the seat belt buckle and the door are opened at the same seat and a
function requiring special protection is called up
R
When the vehicle is locked from outside
#
Select Protect content.
#
Switch Access protection on or off.
%
When access protection is switched off, your user profile can be
viewed from any seat and changes can be made.
%
Access protection is switched on or off on a vehicle-specific
basis.
%
Please note that authentication is necessary for several func‐
tions such as In-Car Office and cannot therefore be completely
switched off.
G-Class - Owner's Manual
MBUX multimedia system Overview and operation
F465 0034 02
419
SETTING UP AND EDITING BIOMETRIC RECOGNITION
The biometric data models are saved in the sensors in the vehicle. If recogni‐
tion has been set up, this sensor serves as a contributory factor for authenti‐
cation on the multimedia system.
#
Select Protect content.
#
Select Voice recognition.
%
If necessary, authenticate yourself on the multimedia system.
SETTING UP VOICE RECOGNITION
#
Speak the sentence shown on the media display and follow the voice
assistant's instructions.
If voice recognition was successful, a message appears on the media
display. You can unlock your user profile.
%
Avoid background or disturbing noises during voice recognition.
DELETING BIOMETRIC DATA
#
Tap on E behind Voice recognition.
#
Select Yes.
CALLING UP THE SET-UP ASSISTANT
#
Select Profile.
#
Select Set-up assistant.
#
Follow the directions from the set-up assistant.
CHANGING A USER NAME OR PROFILE PHOTO
#
Select Profile.
#
Select Change user name.
or
#
Select Profile picture.
#
Enter the user name or select a user image.
#
Select Finished.
%
You can use the Mercedes me ID to store your photo in the
Mercedes-Benz App or in the Mercedes-Benz Portal. The photo
will then be shown in the vehicle. In the vehicle itself, you can
select other sample images instead of the photo.
DELETING A USER PROFILE
#
Select Profile.
#
Select Remove.
#
Select Remove user profile.
%
Your Mercedes me ID and your personal data are retained in the
Mercedes-Benz ecosystem.
RESETTING THE USER PROFILE TO FACTORY SETTINGS
#
Select Profile.
#
Select Reset.
#
Select Yes.
G-Class - Owner's Manual
MBUX multimedia system Overview and operation
F465 0034 02
420
%
This resets the contents of the user profile to factory settings,
but not the vehicle.
You can watch an animation on this topic via the following link:
SELECTING A USER
Multimedia system:
4
©
5
f
%
When you call up your driver profile, the driver's seat and the
steering wheel can be set.
YOU CAN CANCEL THE SETTING PROCESS WITH THE FOL‐
LOWING ACTIONS:
R
Press one of the seat operating buttons in the driver's door.
#
Select Select user.
#
Select a user.
#
When requested to do so, authenticate with the Mercedes me PIN or a
taught-in biometric characteristic.
The user profile is loaded and activated.
%
If you select Continue without selecting user, no specific settings
for the user profile are loaded.
SYNCHRONISING USER PROFILES
Requirements:
R
You have a Mercedes me ID.
R
The vehicle is linked to your Mercedes me ID.
Multimedia system:
4
©
5
f
5
Settings
5
Synchronisation
#
Synchronise automatically
.
When the vehicle is switched on or off, the data stored in the vehicle is
automatically synchronised with the Mercedes me IDs. This synchronisa‐
tion is done for all user profiles and is not profile-specific.
or
#
Select Synchronise now.
The data stored in the vehicle is synchronised with the personal profiles
after selecting this option.
%
Not all user profile functions are available during synchronisa‐
tion. During synchronisation, the most recently changed data is
applied.
%
IF THE PERSONALISATION SERVICE IN THE VEHICLE IS
DEACTIVATED, ONLY THE FOLLOWING USER PROFILE MAS‐
TER DATA IS SYNCHRONISED:
R
Profile name
R
Profile image
R
Mercedes me ID PIN
G-Class - Owner's Manual
MBUX multimedia system Overview and operation
F465 0034 02
421
Favourites
OVERVIEW OF FAVOURITES
Favourites offer you quick access to frequently used applications. 100 favour‐
ites are available in total.
You can select favourites from categories or you add favourites directly from
an application.
%
You can add and edit navigation favourites within the application.
CALLING UP FAVOURITES
Multimedia system:
4
©
5
ß
#
Alternatively, in the home screen pull down bar in the centre of the
status line (/page412).
#
Select ß in the Control Center.
ADDING FAVOURITES
Multimedia system:
4
©
5
ß
SELECTING FAVOURITES FROM CATEGORIES
#
Select r.
#
Select WCreate new favourite.
#
Select the category.
#
Select a favourite.
The favourite is stored at the next available position.
#
All positions in the favourites are taken: confirm the message shown.
A list shows all the favourites.
#
Select a favourite to be overwritten.
ADDING A FAVOURITE FROM AN APPLICATION
You can, for example, save a contact (example), or add an ENERGIZING COM‐
FORT programme.
#
To save a contact as a global favourite: select a contact (/page500).
#
Press on a telephone number until a menu is shown.
#
Select Save as favourite.
The contact is added as a favourite.
RENAMING FAVOURITES
Multimedia system:
4
©
5
ß
#
Press on a favourite until a menu is shown.
#
Select Rename.
#
Enter the name.
#
Save the names.
MOVING FAVOURITES
Multimedia system:
4
©
5
ß
#
Press on a favourite until a menu is shown.
#
Select Move.
#
Move the favourite to the new position.
G-Class - Owner's Manual
MBUX multimedia system Overview and operation
F465 0034 02
422
#
Tap on ø.
DELETING FAVOURITES
Multimedia system:
4
©
5
ß
#
Press on a favourite until a menu is shown.
#
Select Delete.
#
Select Yes.
RESETTING FAVOURITES
#
In the menu, select Reset all favourites.
#
Select Yes.
Notifications Centre
OVERVIEW OF THE NOTIFICATIONS CENTRE
THE FOLLOWING COMMUNICATIONS ARE COLLECTED IN THE NOTIFICA‐
TIONS CENTRE:
R
Communications which are generated by the vehicle or from the multi‐
media system.
R
Messages that arrive through the use of Digital Extras.
THE FOLLOWING NOTIFICATION TYPES ARE AVAILABLE FOR YOU:
R
Navigable destinations and routes
R
Messages (text messages)
R
Calendar entries and reminders, e.g. from In-Car Office
This function is not available in all countries.
R
System information, e.g. Important software update available. Confirm to
start the update.
R
Other notifications, e.g. from additional Digital Extras that can be booked
or from emergency reports (e.g. tornado)
The Notifications Centre is in the Control Centre.
Depending on the style set, newly received notifications are shown using a
coloured dot.
Notifications are normally briefly shown as they are received. If you take no
action, these are stored for future access in the Notifications Centre.
The notifications are sorted chronologically. The most recent notifications are
at the top.
Example of a message
1 Calls up the Notifications Centre
2 Time message received
3 Calls up the settings
4 Display for available actions
5 Description of the notification and the issuing service
6 Symbol for notifications
7 Date of the received notifications
G-Class - Owner's Manual
MBUX multimedia system Overview and operation
F465 0034 02
423
Depending on the type of notification, up to four different actions are availa‐
ble.
EXAMPLES OF ACTIONS INCLUDE:
R
Reading aloud
R
Placing a call
R
Replying
R
Calling up a web page
R
Navigation
Some notifications, e.g. a navigation destination, are stored longer. Therefore,
it is not necessary to carry out available actions directly upon receipt of the
notifications. A route guidance can be started at a later time.
You can pin a notification so that it is not deleted automatically after a certain
time has elapsed (/page423).
CALLING UP NOTIFICATIONS
OPENING THE NOTIFICATIONS CENTRE
#
Select 3 in the Control Center.
SELECTING A NOTIFICATION
#
If several messages are available swipe up or down.
#
Select an action.
CLOSING THE NOTIFICATIONS CENTRE
#
Select G.
SELECTING ACTIONS FOR A NOTIFICATION
THE FOLLOWING OPTIONS ARE AVAILABLE:
R
Select the action directly after a notification is received and shown.
R
Select the action later after calling up in the Notifications Centre.
#
Up to two actions available: select the action.
#
More than two actions available: select q.
#
Select the action.
The notification is still available.
#
Close the actions with r.
EDITING NOTIFICATIONS
#
Call up the Notifications Centre (/page423).
CONFIGURING SETTINGS
#
Select ZSettings .
#
Select the service.
#
Switch the options on or off.
THE FOLLOWING OPTIONS ARE AVAILABLE DEPENDING ON THE
SERVICE:
R
Allow notifications
R
Display in notification centre
R
Show notifications
R
Switching Acoustic signals on or off
R
External access
The option allows an external service access to specific data, e.g.
the current vehicle position. The detailed, approved information is
shown with Õ.
G-Class - Owner's Manual
MBUX multimedia system Overview and operation
F465 0034 02
424
If
Allow notifications is switched off, the options cannot be selected with
the exception of
External access.
PINNING A NOTIFICATION
#
Drag a notification to the right on the touchscreen.
A pin appears.
#
Tap on the pin.
The notification is marked with a pin.
DELETING NOTIFICATIONS
#
Drag a notification to the left on the touchscreen.
or
#
Select E.
#
Select Yes.
All messages are deleted.
Global search
GLOBAL SEARCH OVERVIEW
You can call up the global search on the home screen. You can input charac‐
ters using the keyboard or the handwriting recognition. Alternatively, the MBUX
voice assistant allows voice input.
THE GLOBAL SEARCH PROVIDES SEARCH RESULTS FOR THE FOLLOWING
CATEGORIES:
R
Navigation
R
Entertainment
R
Phone, In-Car Office
In-Car Office is not available in all countries.
R
Digital Owner's Manual
R
Website
The global search enables you to search for towns, roads and tourist attrac‐
tions in the navigation category, for example.
If the search field is empty, you will first see smart suggestions in the
Sugges-
tions
category.
If a letter is entered, the best hits are displayed in the
All category. You will
find further search results in the individual categories. Next to the category is
the number of results.
After selecting a category you can select the search results within the cate‐
gory. When you select a search result, a detailed view is opened depending on
the category.
USING THE GLOBAL SEARCH
Multimedia system:
4
©
5
ª
Search
In the Suggestions category up to six smart suggestions are displayed, even if
no search entry has been entered yet.
#
Enter the search term into the search field.
As soon as a character is entered the
All category is marked. Up to ten
search results per category are displayed there.
In the other categories suitable search results for the entered search
item are displayed.
G-Class - Owner's Manual
MBUX multimedia system Overview and operation
F465 0034 02
425
%
Alternatively, the MBUX Voice Assistant allows voice input
using p or you switch to the handwriting recognition v
(/page425).
#
To end the search: select a.
#
To show search results for a category: select a category.
#
To accept the search result: select the search result.
An action starts, e.g. a radio station is set or a detailed view is displayed,
e.g. for a contact.
Entering characters
USING THE CHARACTER INPUT FUNCTION
Enter the characters on the Touch Control or on the touchscreen. Character
input can be started with a control element and resumed with another.
#
When the keypad is shown, enter the characters by swiping and pressing
on the Touch Control or by tapping on the touchscreen.
Examples for character input include the global search, entering a navigation
destination or the renaming of a favourite, for example.
ENTERING CHARACTERS ON THE TOUCHSCREEN
Requirements:
R
An online connection is required for some functions.
Character input with the keypad (destination entry)
1 Input line with current entry
2 Deletes an entry
3 Selects previous destinations
4 Displays and selects additional destination searches
5 Adopts the search result in the input line and continues the search
6 Search result
7 Deletes the last character entered
8 Hides the keypad
9 Activates voice entry.
A Sets the written language
B Switches to digits and special characters
C Switches to upper-case or lower-case letters
#
Example: call up the navigation and enter a destination address
(/page38).
#
Briefly press on a character.
The character is entered in input line 1.
#
Resume character input.
G-Class - Owner's Manual
MBUX multimedia system Overview and operation
F465 0034 02
426
%
The available editing functions depend on the editing task, the
language set and the character level.
ENTERING ALTERNATIVE CHARACTERS
#
Press and hold on a character.
#
Select the character.
ENDING CHARACTER INPUT
#
Hide keypad 8.
SETTING THE KEYBOARD FOR CHARACTER ENTRY
Multimedia system:
4
©
5
Settings
5
System
5
Keyboards and handwriting
SETTING THE KEYBOARD LANGUAGE
#
Select Keyboard languages.
#
Select one or more keyboard languages.
DELETING THE USER DICTIONARY
The user dictionary learns from your inputs and offers suggestions during
character input. You can reset the user dictionary.
#
Select Reset my dictionary.
#
Select Yes.
G-Class - Owner's Manual
MBUX multimedia system Overview and operation
F465 0034 02

Related Topics

Popular Owner Manuals