2016-2019 Mercedes GLE SUV Breakdown assistance -> Jump-starting User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Breakdown assistance -> Jump-starting for Your Mercedes GLE SUV First Generation (2016-2019)

Jump-starting359Jump-startingPlug-in hybrid: be sure to read the separate Owner's Manual. You could otherwise fail to recognisedangers, e.g. due to high the jump-starting procedure, use only the jump-starting connection point, consisting of a pos-itive terminal and an earth point, in the engine compartment.G WARNINGBattery acid is caustic. There is a risk of contact with the skin, eyes or clothing. Do not breathe in any battery gases. Do not lean overthe battery. Keep the batteries out of the reach of children. Immediately rinse off battery acidthoroughly with plenty of clean water and seek medical attention at once.G WARNINGDuring charging and jump-starting, explosive gases can escape from the battery. There is a riskof an avoid fire, naked flames, creating sparks and smoking. Ensure there is sufficientventilation while charging and jump-starting. Do not lean over a battery.G WARNINGBreakdown assistanceDuring the charging process, a battery produces hydrogen gas. If a short circuit occurs or sparksare created, the hydrogen gas can ignite. There is a risk of an explosion.R Make sure that the positive terminal of a connected battery does not come into contact withvehicle parts.R Never place metal objects or tools on a battery.R It is important that you observe the described order of the battery terminals when connectingand disconnecting a battery.R When jump-starting, make sure that the battery poles with identical polarity are connected.R It is particularly important to observe the described order when connecting and disconnectingthe jump leads.R Never connect or disconnect the battery terminals while the engine is running.G WARNINGA discharged battery can freeze at temperatures below freezing point. When jump-starting thevehicle or charging the battery, gases can escape from the battery. There is a risk of an the frozen battery to thaw out before charging it or jump-starting.! Vehicles with a petrol en
Jump-starting
359
Jump-starting
Plug-in hybrid: be sure to read the separate Owner's Manual. You could otherwise fail to recognise
dangers, e.g. due to high voltage.
For the jump-starting procedure, use only the jump-starting connection point, consisting of a pos-
itive terminal and an earth point, in the engine compartment.
G WARNING
Battery acid is caustic. There is a risk of injury.
Avoid contact with the skin, eyes or clothing. Do not breathe in any battery gases. Do not lean over
the battery. Keep the batteries out of the reach of children. Immediately rinse off battery acid
thoroughly with plenty of clean water and seek medical attention at once.
G WARNING
During charging and jump-starting, explosive gases can escape from the battery. There is a risk
of an explosion.
Particularly avoid fire, naked flames, creating sparks and smoking. Ensure there is sufficient
ventilation while charging and jump-starting. Do not lean over a battery.
G WARNING
Breakdown assistance
During the charging process, a battery produces hydrogen gas. If a short circuit occurs or sparks
are created, the hydrogen gas can ignite. There is a risk of an explosion.
R Make sure that the positive terminal of a connected battery does not come into contact with
vehicle parts.
R Never place metal objects or tools on a battery.
R It is important that you observe the described order of the battery terminals when connecting
and disconnecting a battery.
R When jump-starting, make sure that the battery poles with identical polarity are connected.
R It is particularly important to observe the described order when connecting and disconnecting
the jump leads.
R Never connect or disconnect the battery terminals while the engine is running.
G WARNING
A discharged battery can freeze at temperatures below freezing point. When jump-starting the
vehicle or charging the battery, gases can escape from the battery. There is a risk of an explosion.
Allow the frozen battery to thaw out before charging it or jump-starting.
! Vehicles with a petrol engine: avoid repeated and lengthy starting attempts. Otherwise, the
non-combusted fuel may damage the catalytic converter.
If the indicator/warning lamps do not light up at low temperatures, it is very likely that the dis-
charged battery has frozen. In this case you may neither jump-start the vehicle nor charge the
battery. The service life of a battery that has been thawed may be reduced. The starting charac-
teristics may be impaired, especially at low temperatures. Have the thawed battery checked at a
qualified specialist workshop.
Z
Jump-starting360Do not use a rapid charging device to start the vehicle. If your vehicle's battery is discharged, theengine can be jump-started from another vehicle or from a donor battery using jump leads. Observethe following points:R the battery is not accessible in all vehicles. If the other vehicle's battery is not accessible, jump-start the vehicle using a donor battery or a jump-starting device.R Vehicles with a petrol engine: jump-start the vehicle only when the engine and exhaust systemare cold.R do not start the engine if the battery is frozen. Let the battery thaw first.R jump-starting may be performed only using batteries with a nominal voltage of 12 VR use only jump leads that have a sufficient cross-section and insulated terminal clamps.R if the battery is fully discharged, leave the battery that is being used to jump-start connected fora few minutes before attempting to start. This charges the empty battery a little.R make sure that the two vehicles do not sure that:R the jump leads are not damaged.R non-insulated parts of the terminal clamps do not come into contact with other metal parts whilethe jump leads are connected to the batteryR the jump leads cannot come into contact with parts that can move when the engine is running,such as the V-belt pulley or the assistanceX Secure the vehicle by applying the electric parking brake.X Shift the transmission to position j.X Make sure that the ignition is switched off. All indicator lamps on the instrument cluster must beoff. When using the key, turn the key to key position u in the ignition lock and remove it( Y page 144).X Switch off all electrical consumers, e.g. rear window heating, lighting etc.X Open the bonnet.i Right-hand-drive: The jump-starting connection points may be on the opposite number B identifies the charged battery of the other vehicle or an equivalent jump-startingdevice.
Jump-starting
360
Do not use a rapid charging device to start the vehicle. If your vehicle's battery is discharged, the
engine can be jump-started from another vehicle or from a donor battery using jump leads. Observe
the following points:
R the battery is not accessible in all vehicles. If the other vehicle's battery is not accessible, jump-
start the vehicle using a donor battery or a jump-starting device.
R Vehicles with a petrol engine: jump-start the vehicle only when the engine and exhaust system
are cold.
R do not start the engine if the battery is frozen. Let the battery thaw first.
R jump-starting may be performed only using batteries with a nominal voltage of 12 V
R use only jump leads that have a sufficient cross-section and insulated terminal clamps.
R if the battery is fully discharged, leave the battery that is being used to jump-start connected for
a few minutes before attempting to start. This charges the empty battery a little.
R make sure that the two vehicles do not touch.
Make sure that:
R the jump leads are not damaged.
R non-insulated parts of the terminal clamps do not come into contact with other metal parts while
the jump leads are connected to the battery
R the jump leads cannot come into contact with parts that can move when the engine is running,
such as the V-belt pulley or the fan.
Breakdown assistance
X Secure the vehicle by applying the electric parking brake.
X Shift the transmission to position j.
X Make sure that the ignition is switched off. All indicator lamps on the instrument cluster must be
off. When using the key, turn the key to key position u in the ignition lock and remove it
( Y page 144).
X Switch off all electrical consumers, e.g. rear window heating, lighting etc.
X Open the bonnet.
i Right-hand-drive: The jump-starting connection points may be on the opposite side.
Position number B identifies the charged battery of the other vehicle or an equivalent jump-starting
device.
Towing and tow-starting361X Slide cover : of positive terminal ; in the direction of the arrow.X Connect positive terminal ; on your vehicle to positive terminal = of donor battery B using thejump lead. Always begin with positive terminal ; on your own vehicle first.X Start the engine of the donor vehicle and run it at idling speed.X Connect negative terminal ? of donor battery B to earth point A of your vehicle using the jumplead. Connect the jump lead to donor battery B first.X Start the engine.X Before disconnecting the jump leads, let the engines run for several minutes.X First, remove the jump leads from earth point A and negative terminal ?, then from positiveclamp ; and positive terminal =. Each time, begin at the contacts on your own vehicle.X After removing the jump leads, close cover : of positive terminal clamp ;.X Have the battery checked at a qualified specialist -starting is not considered to be a normal operating condition.i Jump-starting cables and further information regarding jump-starting can be obtained at anyqualified specialist and tow-startingThere is a risk of an towing or tow-starting another vehicle,Important safety notesBreakdown assistanceits weight should not be greater than the per-Plug-in hybrid: be sure to read the separatemissible gross weight of your 's Manual. You could otherwise fail torecognise dangers, e.g. due to high on the permissible gross vehicle weightof your vehicle can be found on the vehicle iden-G WARNINGtification plate ( Y page 386).Safety-relevant functions are restricted or not! When Active Brake Assist, Distance Pilotavailable if:DISTRONIC or the HOLD function is activated,R the engine is not vehicle brakes automatically in certainsituations.R the brake system or the power steering isTo avoid damage to the vehicle, deactivatemalfunctioningthese systems in the following or similar sit-R the voltage supply or the vehicle's electrical
Towing and tow-starting
361
X Slide cover : of positive terminal ; in the direction of the arrow.
X Connect positive terminal ; on your vehicle to positive terminal = of donor battery B using the
jump lead. Always begin with positive terminal ; on your own vehicle first.
X Start the engine of the donor vehicle and run it at idling speed.
X Connect negative terminal ? of donor battery B to earth point A of your vehicle using the jump
lead. Connect the jump lead to donor battery B first.
X Start the engine.
X Before disconnecting the jump leads, let the engines run for several minutes.
X First, remove the jump leads from earth point A and negative terminal ?, then from positive
clamp ; and positive terminal =. Each time, begin at the contacts on your own vehicle.
X After removing the jump leads, close cover : of positive terminal clamp ;.
X Have the battery checked at a qualified specialist workshop.
Jump-starting is not considered to be a normal operating condition.
i Jump-starting cables and further information regarding jump-starting can be obtained at any
qualified specialist workshop.
Towing and tow-starting
There is a risk of an accident.
When towing or tow-starting another vehicle,
Important safety notes
Breakdown assistance
its weight should not be greater than the per-
Plug-in hybrid: be sure to read the separate
missible gross weight of your vehicle.
Owner's Manual. You could otherwise fail to
recognise dangers, e.g. due to high voltage.
Details on the permissible gross vehicle weight
of your vehicle can be found on the vehicle iden-
G WARNING
tification plate ( Y page 386).
Safety-relevant functions are restricted or not
! When Active Brake Assist, Distance Pilot
available if:
DISTRONIC or the HOLD function is activated,
R the engine is not running.
the vehicle brakes automatically in certain
situations.
R the brake system or the power steering is
To avoid damage to the vehicle, deactivate
malfunctioning
these systems in the following or similar sit-
R the voltage supply or the vehicle's electrical
uations:
system is malfunctioning.
R when towing away
If your vehicle is towed, significantly greater
R in a car wash
force may be required to steer the vehicle or
! Make sure that the electric parking brake is
to brake. There is a risk of an accident.
released. If the electric parking brake is faulty,
In such circumstances, use a towing bar.
visit a qualified specialist workshop.
Make sure that the steering is moving freely
! Only secure the tow cable or tow bar to the
before towing.
towing eyes or, if available, to the trailer tow
hitch. You could otherwise damage the vehi-
G WARNING
cle.
When towing or tow-starting another vehicle
! Observe the following points when towing
and its weight is greater than the permissible
with a tow rope:
gross weight of your vehicle, the:
R Secure the tow rope on the same side on
R towing eye may be torn off
both vehicles.
R car/trailer combination may swerve or
R Make sure that the tow rope is not longer
than legally permitted. Mark the tow rope in
even overturn
Z

Related Topics

Popular Owner Manuals