Get QUICK REFERENCE Guide for Mini Clubman SUV Second Generation (2015-2024)

QUICK REFERENCE

Getting in

Buttons for the central locking

system

Opening and closing

Buttons on the vehicle key

Overview

1

2

3

Unlocking

Locking

Buttons for the central locking system.

Open split doors

Panic mode

Locking

4

Pressing the button locks the vehi-

cle if the front doors are closed.

Unlocking the vehicle

Unlocking

Press the button on the vehicle key.

Pressing the button unlocks the ve-

hicle.

Depending on the settings, either only the

driver's door or all vehicle access points are

unlocked.

Panic mode

You can trigger the alarm system if you find

yourself in a dangerous situation.

If only the driver's door is unlocked, press

the button on the vehicle key again to un-

lock the other vehicle access points.

Press the button on the vehicle key

and hold for at least 3 seconds.

Press and hold the button on the

vehicle key after unlocking.

To switch off the alarm: press any button.

The windows and the glass sunroof are

opened, as long as the button on the vehicle

key is pressed.

Comfort Access

Principle

Locking the vehicle

The vehicle can be accessed without operat-

ing the vehicle key.

Press the button on the vehicle key.

Carrying the vehicle key with you, e.g., in

your pants pocket, is sufficient.

All vehicle access points are locked.

16

Online Edition for Part no. 01405A7B0F2 - II/23

Getting in

QUICK REFERENCE

The vehicle automatically detects the vehi-

cle key when it is in close proximity or in

the interior.

Performing the foot movement

1. Stand in the middle behind the vehicle

at approx. one arm's length away from

the rear of the vehicle.

Unlocking the vehicle

2. Wave a foot under the vehicle in the

driving direction and immediately pull it

back.

Press the button on the door handle of the

driver's or front passenger door.

Split Doors

Opening

Locking the vehicle

Press the button on the door handle of the

driver's or front passenger door.

–

Unlock the vehicle and use the button

in the handle to completely open first

the right side, arrow 1, and then the left

side of the split doors, arrow 2.

Opening the split doors with no-touch

activation

Press and hold the button on the

vehicle key for approx. 1 second

to open the right side of the split

doors.

Principle

The split doors can be opened with no-touch

activation using the vehicle key you are car-

rying.

Press and hold the button on the vehicle

key again for approx. 1 second to open

the left side of the split doors.

Depending on the setting, the doors may be

unlocked.

17

Online Edition for Part no. 01405A7B0F2 - II/23

QUICK REFERENCE

Getting in

Closing

Driver's door

Closing the split doors manually.

Displays and control elements

In the vicinity of the steering

wheel

1

2

3

Safety switch

Power windows

Exterior mirrors

All around the selector lever

1

2

Low beams, fog lights

High beams, headlight flasher, turn sig-

nal

3

4

Instrument cluster

Window wiper system

Indicator/warning lights

The indicator/warning lights can illuminate

in a variety of combinations and colors.

1

2

3

Selector lever

Controller with buttons

Parking brake

Several of the lights are checked for

proper functioning and illuminate tempora-

rily when the engine is started or the igni-

tion is switched on.

Central Information Display (CID)

Principle

The Central Information Display (CID) com-

bines the functions of a multitude of

switches. These functions can be operated

via the Controller.

18

Online Edition for Part no. 01405A7B0F2 - II/23

Getting in

QUICK REFERENCE

Buttons on the Controller

Button Function

Ending the voice control system

Press the button on the steering

wheel or ›Cancel‹.

Press once: calls up the main

menu.

Press twice: displays all menu

items of the main menu.

Call up the Communication

menu.

Call up the Media/Radio menu.

Call up the destination input

menu for navigation.

Call up the CarPlay menu.

Call up the navigation map.

Press once: opens the previous

display.

Press and hold: open the menus

used last.

Call up the Options menu.

Voice control

Activating the voice control system

Press the button on the steering

wheel.

Wait for the signal tone.

Say the command.

This icon indicates that the voice acti-

vation system is active.

If no other commands are available, oper-

ate the function via the Central Information

Display (CID).

19

Online Edition for Part no. 01405A7B0F2 - II/23

QUICK REFERENCE

Set-up and use

Adjusting the head restraint

Height

Seats, mirrors and steering

wheel

Manually adjustable seats

–

To raise: push the head restraint up.

To lower: press the button, arrow 1, and

push the head restraint down.

1

2

3

4

Longitudinal direction

Thigh support

Height

Adjusting the exterior mirrors

Backrest tilt

Electrically adjustable seats

1

2

Adjusting

Selecting a mirror, Automatic Curb Mon-

itor

1

2

3

4

Memory function

3

Folding in and out

Lumbar support

Backrest tilt

Forward/backward, height, seat tilt

20

Online Edition for Part no. 01405A7B0F2 - II/23

Set-up and use

QUICK REFERENCE

Press the desired button 1 or 2.

Adjusting the steering wheel

In four directions

The procedure stops when a seat setting

switch or one of the memory buttons is

pressed.

Once underway, adjustment of the seat po-

sition on the driver's side is disabled after a

short while.

Infotainment

Radio

1. Fold the lever down.

Buttons and functions

Depending on the country and equipment

version, the radio has the following buttons.

2. Move the steering wheel to the prefer-

red height and angle to suit your seat

position.

3. Fold the lever back up.

Memory function

Principle

The following settings can be stored and,

if necessary, retrieved using the memory

function:

Button Function

Press: turns sound output on/off.

Turn: adjusts the volume.

Change the entertainment

source.

Press once: changes the station/

track.

–

Seat position.

Press and hold: fast forward/re-

wind the track.

Exterior mirror position.

Height of the Head-up display.

Programmable memory buttons.

Storing

1. Turn on the ignition.

2. Set the desired position.

Changeover of wave range/satel-

lite radio.

Navigation destination input

Entering a destination via address

State/province

3.

Press the button. The LED in

the button illuminates.

4. Press the desired button 1 or 2 on the

seat while the LED is illuminated. The

LED goes out.

1.

2.

"Navigation"

Calling up settings

"Enter address"

The stored position is called up automati-

cally.

3. "State/Province?"

4. Select the country from the list.

21

Online Edition for Part no. 01405A7B0F2 - II/23

QUICK REFERENCE

Entering the address

Set-up and use

6. To perform additional functions with

your mobile phone, e.g., to search for/

connect a Bluetooth device or new de-

vice, please refer to your mobile phone's

operating instructions.

The address can be entered in any order.

Example: entering the address via the town/

city

1. "City/Postal code?"

2. Enter the town/city.

The vehicle's Bluetooth name is shown

on your mobile phone's display. Select

the vehicle's Bluetooth name.

The list is narrowed down further with

each entry.

7. Depending on the mobile device, a con-

trol number is displayed or the control

number must be entered.

3.

Select the icon.

4. Select a town/city from the list.

5. If necessary, enter the street.

–

Compare the control number dis-

played on the control display with

the control number displayed on the

mobile device. Confirm the control

number on the device and on the

control display.

6. Select the street as you would the town/

city.

7. If necessary, enter a house number.

8.

Select the icon.

–

Enter and confirm the same control

number on the device and via the

Central Information Display (CID).

9. Select a house number or range of house

numbers from the list.

The device is connected and displayed in

the device list.

Starting destination guidance

"Start guidance"

Using the telephone

Accepting a call

Destination guidance is started to the town/

city center if no street is entered.

Pairing the mobile phone

Incoming call can be accepted via the Cen-

tral Information Display (CID) or the button

on the steering wheel.

After the mobile phone is paired once with

the vehicle, the mobile phone can be oper-

ated using the Central Information Display

(CID), the steering wheel buttons and spo-

ken instructions.

Via the Central Information Display (CID)

"Accept"

1.

"My MINI"

Via the button on the steering wheel

2. "System settings"

3. "Mobile devices"

4. "Connect new device"

Press the button.

Via the instrument cluster

Use the OK button on the steering wheel to

select: "Accept"

The vehicle's Bluetooth name is dis-

played on the control display.

5. Select the functions for which the mo-

bile phone is to be used.

22

Online Edition for Part no. 01405A7B0F2 - II/23

Set-up and use

QUICK REFERENCE

Dialing a number

Pairing the iPhone with CarPlay

Pair iPhone via Bluetooth with the vehicle.

Select CarPlay as the function:

"Apple CarPlay"

1.

"Communication"

2. "Dial number"

3. Select the numbers individually.

The iPhone is connected to the vehicle and

displayed in the device list.

4.

Select the icon.

Establish the connection via the additional

telephone:

1.

Press the button.

2. "Call via"

Apple CarPlay preparation

Principle

CarPlay allows select functions of a compat-

ible Apple iPhone to be used via Siri voice

control and the on-board monitor.

Functional requirements

–

Compatible iPhone: iPhone 5 or later

with iOS 7.1 or later.

–

Corresponding mobile contract.

Bluetooth, Wi-Fi, and Siri voice control

are activated on the iPhone.

–

If necessary, the setting for mobile data

must be activated on the iPhone.

Wi-Fi and Bluetooth are enabled in the

vehicle.

Turning on Bluetooth and CarPlay

Via the Central Information Display (CID):

1.

"My MINI"

2. "System settings"

3. "Mobile devices"

4. "Settings"

5. Select the following settings:

–

"Bluetooth®"

"Apple CarPlay"

23

Online Edition for Part no. 01405A7B0F2 - II/23

QUICK REFERENCE

On the road

Driving

On the road

Manual transmission: switching off

1. With the vehicle at a standstill, press

the Start/Stop button.

Starting and stopping the engine

Ignition on/off

2. Shift into first gear or reverse.

3. Set the parking brake.

–

On: press the Start/Stop

button.

Steptronic transmission: switching off

1. When the vehicle is stationary, apply

the parking brake.

Most of the indica-

tor/warning lights illumi-

nate for a varied length of

time.

2. Engage selector lever position P.

3. Press the Start/Stop button.

–

Off: press the Start/Stop button again.

All indicator lights turn off.

Auto Start/Stop function

Manual transmission: switches the engine

off automatically while stationary to save

fuel. As soon as the clutch pedal is de-

pressed, the engine starts automatically.

Radio-ready state: when the ignition is

switched off, press the ON/OFF button

on the radio or when the engine is run-

ning, press the Start/Stop button.

Steptronic transmission: switches the en-

gine off automatically while stationary to

save fuel. The engine starts automatically

when the brake pedal is released.

Some electrical components remain

ready for operation.

Start/stop engine

Parking brake

Manual transmission: starting

1. Depress the brake pedal.

Set the electrical parking brake

2. Press on the clutch pedal and shift to

Neutral.

Pull the switch when the vehicle is

stationary.

3. Press the Start/Stop button.

The LED and indicator illuminate.

Steptronic transmission: starting

1. Depress the brake pedal.

Releasing

Manual transmission: press the switch

while the brake pedal is depressed.

2. Engage selector lever position P or N.

3. Press the Start/Stop button.

Steptronic transmission: press the switch

while the brake is depressed or selector

lever position P is set.

The LED and indicator light turn off.

The parking brake is released.

24

Online Edition for Part no. 01405A7B0F2 - II/23

On the road

QUICK REFERENCE

Manual transmission

Shifting

Steptronic transmission, Sport and

manual mode

When shifting into 5th or 6th gear, push

the gearshift lever to the right in order to

prevent inadvertent shifting into the 3rd or

4th gear.

Reverse gear

Select only when the vehicle is stationary.

To overcome the resistance push the gear-

shift lever dynamically to the left and en-

gage reverse gear with a forward shifting

movement.

Sport program:

Press the selector lever to the left from se-

lector lever position D.

Manual mode:

Steptronic transmission

–

Downshifting: press the selector lever

forward.

Selector lever positions

Parking position P.

Reverse R.

–

Upshifting: pull the selector lever rear-

wards.

Neutral N.

Turn signal, high beams, headlight

flasher, roadside parking lights

Gear position D.

Engage selector lever position P or R only

when the vehicle is stationary.

Turn signal

To prevent the vehicle from creeping after

you select a gear position or reverse, main-

tain pressure on the brake pedal until you

are ready to drive off.

Selector lever lock

A lock prevents an inadvertent change from

selector lever position P to another selector

lever position and, depending on the trans-

mission version, inadvertent switching to

selector lever position P or R.

–

Flashing: press the lever past the resist-

ance point.

To release the lock: with the brake pedal

depressed, press the button on the side of

the selector lever.

Triple turn signal activation: lightly tap

the lever up or down.

Brief flashing: press the lever to the

resistance point and hold it there for

as long as you want the turn signal to

flashing.

25

Online Edition for Part no. 01405A7B0F2 - II/23

QUICK REFERENCE

On the road

High beams, headlight flasher

Lights and lighting

Lighting functions

Icon

Function

Front fog lights.

Automatic headlight control.

Cornering light.

Press the lever forward or pull it backward.

Lights off.

–

High beams on, arrow 1.

Daytime driving lights.

The high beams illuminate when the low

beams are switched on.

Parking lights.

–

High beams off/headlight flasher, ar-

row 2.

Low beams.

Canada: roadside parking light

Instrument lighting.

Window wiper system

Turning the wipers on/off and flick

wipe

Turning on

To illuminate the vehicle on one side.

–

On: with the radio-ready state switched

off, press the lever either up or down

past the resistance point for approx.

2 seconds.

–

Off: briefly press the lever to the resist-

ance point in the opposite direction.

Press the lever up until the desired position

is reached.

26

Online Edition for Part no. 01405A7B0F2 - II/23

On the road

QUICK REFERENCE

–

Resting position of the wipers: posi-

tion 0.

Set interval period or sensitivity of the

rain sensor

–

Rain sensor: position 1.

Normal wiper speed: position 2.

Fast wiper speed: position 3.

Turning off and flick wipe

Turn the thumbwheel on the wiper lever.

Cleaning the windshield

Press the lever down.

–

Switching off: press the lever down until

it reaches its basic setting.

–

Flick wipe: press the lever down from

the basic setting.

Rain sensor

Pull the lever.

Activate/deactivate

Canada: window wiper system

Turning the wipers on/off and flick

wipe

Turning on

To activate: press the lever up once from its

basic setting, arrow 1.

To deactivate: press the lever back into the

basic setting.

Tap up the lever or press it past the resist-

ance point.

27

Online Edition for Part no. 01405A7B0F2 - II/23

QUICK REFERENCE

On the road

–

Normal wiper speed: tap up once.

Set interval period or sensitivity of the

rain sensor

Fast wiper speed: tap up twice or tap

once beyond the resistance point.

Turning off and flick wipe

Turn the thumbwheel on the wiper lever.

Cleaning the windshield

Press the lever down.

–

To turn off fast wipe: press down twice.

To turn off normal wipe: press down

once.

–

Flick wipe: press down once.

Rain sensor

Activate/deactivate

Pull the lever.

Climate control

Air conditioning system

Button

Function

Temperature.

Press the button on the wiper lever.

Air conditioning.

Air recirculation mode.

28

Online Edition for Part no. 01405A7B0F2 - II/23

On the road

Button

QUICK REFERENCE

Button

Function

Adjusts the air flow,

manual.

Heated windshield.

Rear window defroster.

Adjusts the air distribution

manually.

Refueling stop

Refueling

Fuel cap

Heated windshield.

1. To open the fuel filler flap, press on

the rear edge, arrow. The fuel filler flap

opens.

Automatic climate control

Button

Function

Temperature.

Air conditioning.

Maximum cooling.

AUTO program.

2. Turn the fuel cap counterclockwise.

3. Place the fuel cap in the bracket at-

tached to the fuel filler flap.

Gasoline

Automatic air recircula-

tion control AUC/recircu-

lated-air mode.

For the best fuel efficiency, the gasoline

should be sulfur-free or very low in sulfur

content.

Adjusts the air flow,

manual.

Refuel only with unleaded gasoline without

metallic additives.

Information on the recommended gasoline

quality can be found in the Owner's Manual.

Air distribution, manual.

Defrosts and defogs the

windows.

29

Online Edition for Part no. 01405A7B0F2 - II/23

QUICK REFERENCE

On the road

Wheels and tires

Adding engine oil

General information

Tire pressure specifications

Turn off the ignition and safely park the

vehicle before engine oil is added.

Adding engine oil

The tire inflation pressure values can be

found on the sign on the door pillar.

Checking the tire pressure

Regularly check the tire inflation pressure

and correct it as needed:

Only add engine oil when the message is

displayed in the instrument cluster.

–

At least twice a month.

Observe the top-up quantity in the message.

Take care not to add too much engine oil.

Observe recommended engine oil types.

Before embarking on an extended trip.

After correcting the tire pressure

Reinitialize the Flat Tire Monitor.

Monitor the tire pressure.

Providing assistance

Electronic oil measurement

Prerequisites

Hazard warning flashers

A current measured value is available af-

ter approx. 30 minutes of driving. During

a shorter trip, the status of the last, suffi-

ciently long trip is displayed.

Displaying the engine oil level

Via the Central Information Display (CID):

The button is located above the control dis-

play.

1.

"My MINI"

2. "Vehicle status"

3.

"Engine oil level"

The engine oil level is displayed.

30

Online Edition for Part no. 01405A7B0F2 - II/23

On the road

QUICK REFERENCE

Breakdown Assistance

MINI Roadside Assistance

This service can be reached around the

clock in many countries.

1.

"MINI Connected"

2. "MINI Assist"

3. "MINI Roadside Assistance"

The contact to the MINI Roadside Assis-

tance is established.

A telephone number is displayed, if

needed. Select to dial the telephone

number on a connected mobile phone.

31

Online Edition for Part no. 01405A7B0F2 - II/23

QUICK REFERENCE for Your Mini Clubman SUV Second Generation (2015-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals