Get CONTROLS -> Interior equipment Guide for Mini Cooper 2 Door Third Generation (2016-2023)

Interior equipment

CONTROLS

Interior equipment

Safety information

Vehicle features and options

This chapter describes all standard, country-

specific and optional features offered with

the series. It also describes features and

functions that are not necessarily available

in your vehicle, e.g., due to the selected op-

tions or country versions. This also applies

to safety-related functions and systems.

When using these functions and systems,

the applicable laws and regulations must be

observed.

Warning

The operation of remote-controlled sys-

tems with the integrated universal remote

control, such as the garage door, may re-

sult in injury, for example, body parts be-

coming jammed in a garage door. There is

a risk of injury or risk of damage to prop-

erty. Make sure that the area of movement

of the respective system is clear during

programming and operation. Also follow

the safety information of the hand-held

transmitter.

Integrated Universal Remote

Control

Compatibility

If this symbol is printed on the pack-

aging or in the owner's manual of the

system to be controlled, the system

is generally compatible with the integrated

Universal Remote Control.

Concept

The integrated Universal Remote Control in

the interior mirror can operate up to 3 func-

tions of remote-controlled systems such as

garage door drives, barriers, or lighting sys-

tems.

Additional questions are answered by:

–

A dealer's service center or another

qualified service center or repair shop.

General information

–

The Integrated Universal Remote Control

replaces up to 3 different hand-held trans-

mitters. To operate the remote control, the

buttons on the interior mirror must be pro-

grammed with the desired functions. The

hand-held transmitter for the particular sys-

tem is required in order to program the re-

mote control.

HomeLink is a registered trademark of Gen-

tex Corporation.

Before selling the vehicle, delete the stored

functions for the sake of security.

If possible, do not install the antenna of the

remote-controlled system, e.g. the garage

door drive, near metal objects to ensure the

best possible operation.

187

Online Edition for Part no. 01405A02680 - II/20

CONTROLS

Interior equipment

down the interior mirror button and re-

Overview

peatedly press and release the hand-held

transmitter button for 2 seconds.

–

The LED lights up green: program-

ming completed.

6.

Release the button.

–

The LED flashes fast: programming

is not complete.

Press the button on the interior mir-

ror for 2 seconds and release. Per-

form this procedure three times to

complete the programming proce-

dure.

1

2

3

LED

Programmable keys

Hand-held transmitters of the system

If the integrated universal remote

control remains nonoperational, con-

tinue with the special features for

change code wireless systems.

Programming

General information

–

LED does not flash green after

60 seconds: programming not com-

pleted.

The battery of the hand-held transmitter

must be fully charged at the time of pro-

gramming to ensure an optimal range of the

integrated universal remote control.

Repeat steps 3 to 6.

To program other functions on other but-

tons, repeat steps 3 to 5.

1. Switch on the ignition.

2. Initial setup:

Special feature of the rolling code

wireless system

If you are unable to operate the system af-

ter repeated programming, please check if

the system to be controlled features a roll-

ing code radio system.

Press and hold the two outer buttons on

the interior mirror simultaneously for

approximately 10 seconds until the LED

flashes green rapidly. This erases all pro-

gramming of the buttons on the interior

mirror.

Refer to the owner's manual for the system.

3. Press the interior mirror button to be

programmed. The LED on the interior

mirror will slowly begin flashing orange.

For systems with a rolling code radio sys-

tem, the integrated Universal Remote Con-

trol and the system also have to be

synchronized.

4. Hold the hand-held transmitter for the

system to be used approx. 1 to 12 in/2.5

to 30 cm away from the buttons on the

interior mirror. The required distance

depends on the hand-held transmitter.

Please read the owner's manual to find out

how to synchronize the system.

Synchronizing is easier with the aid of a

second person.

5. Press and hold the button of the desired

function on the hand-held transmitter.

Canada: if programming with the hand-

held transmitter was interrupted, hold

188

Online Edition for Part no. 01405A02680 - II/20

Interior equipment

–

CONTROLS

Synchronizing the universal remote control

with the system:

The LED flashes fast: the hand-held

transmitter was detected but pro-

gramming is not complete.

1. Park the vehicle within range of the re-

mote-controlled system.

Press the button on the interior mir-

ror for 2 seconds and release. Per-

form this procedure three times to

complete the programming proce-

dure.

2. Program the relevant button on the inte-

rior mirror as described.

3. Locate and press the synchronizing but-

ton on the system being programmed,

e.g. at the garage gate. You have approx.

30 seconds for the next step.

If the integrated universal remote

control remains nonoperational, con-

tinue with the special features for

change code wireless systems.

4. Hold down the programmed button on

the interior mirror for approximately

3 seconds and then release it. If neces-

sary, repeat this step up to three times

in order to finish synchronization. Once

synchronization is complete, the pro-

grammed function will be carried out.

–

LED does not flash green after

60 seconds: programming not com-

pleted.

Repeat steps 3 to 6.

If the programming procedure is not com-

pleted, the previous programming will re-

main unchanged.

Reprogramming individual buttons

1. Switch on the ignition.

Operation

2. Press and hold the interior mirror but-

ton to be programmed.

Warning

3. As soon as the LED on the interior mir-

ror flashes orange after approx. 20 sec-

onds, release the button.

The operation of remote-controlled sys-

tems with the integrated universal remote

control, such as the garage door, may re-

sult in injury, for example, body parts be-

coming jammed in a garage door. There is

a risk of injury or risk of damage to prop-

erty. Make sure that the area of movement

of the respective system is clear during

programming and operation. Also follow

the safety information of the hand-held

transmitter.

4. Hold the hand-held transmitter for the

system to be used approx. 1 to 12 in/2.5

to 30 cm away from the buttons on the

interior mirror. The required distance

depends on the hand-held transmitter.

5. Press and hold the button of the desired

function on the hand-held transmitter.

Canada: if programming with the hand-

held transmitter was interrupted, hold

down the interior mirror button and re-

peatedly press and release the hand-held

transmitter button for 2 seconds.

The system, such as the garage door, can be

operated using the button on the interior

mirror while the engine is running or when

the ignition is started. To do this, hold down

the button within receiving range of the

system until the function is activated. The

interior mirror LED stays lit while the wire-

less signal is being transmitted.

6. The LED can light up in different ways.

–

The LED lights up green: the pro-

gramming procedure is completed.

Release the button.

189

Online Edition for Part no. 01405A02680 - II/20

CONTROLS

Interior equipment

Deleting stored functions

Mirror display

All stored functions will be deleted. The

functions cannot be deleted individually.

The compass shows the current driving di-

rection.

Press and hold the two outer buttons on the

interior mirror simultaneously for approxi-

mately 10 seconds until the LED on the in-

terior mirror flashes green rapidly.

Operating concept

Various functions can be called up by press-

ing the control button with a pointed object,

such as the tip of a ballpoint pen or similar

object. The following setting options are

displayed in succession, depending on how

long the control button is pressed:

Digital compass

–

Pressed briefly: turns display on/off.

3 to 6 seconds: compass zone setting.

6 to 9 seconds: compass calibration.

Overview

9 to 12 seconds: left/right-hand steering

setting.

–

12 to 15 seconds: language setting.

Setting the compass zones

Sets the particular compass zones on the ve-

hicle so that the compass operates correctly;

refer to World map with compass zones.

1

2

Control button

Mirror display

190

Online Edition for Part no. 01405A02680 - II/20

Interior equipment

CONTROLS

World map with magnetic zones

Procedure

1. Press and hold the control button for ap-

prox. 3 to 4 seconds. The number of the

set compass zone appears in the mirror.

1. Make sure that there are no large metal-

lic objects or overhead power lines near

the vehicle and that there is sufficient

room to drive around in a circle.

2. To change the zone setting, press the

control button quickly and repeatedly

until the number of the compass zone

that corresponds with your location ap-

pears in the mirror.

2. Set the currently applicable compass

zone.

3. Press and hold the control button for ap-

prox. 6 to 7 seconds so that "C" appears

on the display. Next, drive in a complete

circle at least once at a speed of no more

than 4 mph/7 km/h. If calibration is suc-

cessful, the "C" is replaced by the points

of the compass.

The set zone is stored automatically. The

compass is ready for use again after approx-

imately 10 seconds.

Calibrating the digital compass

The digital compass must be calibrated in

the event of the following:

Left/right-hand steering

The digital compass is already set for right

or left-hand steering at the factory.

–

The wrong compass point is displayed.

The point of the compass displayed does

not change despite changing the direc-

tion of travel.

Setting the language

Press and hold the control button for ap-

prox. 12 to 13 seconds. Briefly press the

–

Not all points of the compass are dis-

played.

191

Online Edition for Part no. 01405A02680 - II/20

CONTROLS

Interior equipment

control button again to switch between

English "E" and German "O".

Ashtray/cigarette lighter

Settings are stored automatically after ap-

proximately 10 seconds.

Overview

Sun visor

Glare shield

To provide protection against glare, fold the

sun visor down or pivot it to the side.

Vanity mirror

A vanity mirror is located in the sun visor

behind a cover.

The ashtray is located in one of the frontal

cup holders, the cigarette lighter above it in

the center console.

When the cover is opened, the mirror light-

ing switches on.

Ashtray

In order to empty the ashtray, remove the

ashtray from the cup holder.

Front passenger side dash-

board

Cigarette lighter

Safety information

Decorative trim

Warning

Contact with the hot heating element or

the hot socket of the cigarette lighter can

cause burns. Flammable materials can ig-

nite if the cigarette lighter falls down or is

held against the objects. There is a risk of

fire and injuries. There is a risk of damage

to property. Take hold of the cigarette

lighter by its handle. Make sure that chil-

dren do not use the cigarette lighter.

Customized decorative trim panels for the

dashboard on the front passenger side are

available as original MINI accessories de-

pending on the equipment specification.

Follow the assembly instructions.

192

Online Edition for Part no. 01405A02680 - II/20

Interior equipment

NOTICE

CONTROLS

NOTICE

If metal objects fall into the socket, they

can cause a short circuit. There is a risk of

damage to property. Replace the cigarette

lighter or socket cover again after using

the socket.

Battery chargers for the vehicle battery

can work with high voltages and currents,

which means that the 12 volt on-board

network can be overloaded or damaged.

There is a risk of damage to property. Only

connect battery chargers for the vehicle

battery to the starting aid terminals in the

engine compartment.

Operation

Push in the cigarette lighter.

The cigarette lighter can be

removed as soon as it pops

back out.

NOTICE

If metal objects fall into the socket, they

can cause a short circuit. There is a risk of

damage to property. Replace the cigarette

lighter or socket cover again after using

the socket.

Sockets

Concept

In the center console

The lighter socket can be used as a socket

for electrical equipment when standby and

drive-ready state are switched on.

General information

The total load of all sockets must not exceed

140 watts at 12 volts.

Do not damage the socket by using non-

compatible connectors.

Remove the cover or cigarette lighter.

Safety information

Warning

Devices and cables in the unfolding area of

the airbags, such as portable navigation

devices, can hinder the unfolding of the

airbag or be thrown around in the car's in-

terior during unfolding. There is a risk of

injury. Make sure that devices and cables

are not in the airbag's area of unfolding.

193

Online Edition for Part no. 01405A02680 - II/20

CONTROLS

Interior equipment

Properties of lower USB port:

In the cargo area

–

USB port Type C.

For charging mobile devices and for

data transfer.

–

Charge current: max. 3 A.

Wireless charging tray

Concept

The socket is located on the right side in

the cargo area.

The wireless charging tray enables the fol-

lowing functions to be performed without

cables:

–

Charging the rechargeable battery of a

mobile phone with Qi capability and of

other mobile devices, which support the

Qi standard.

USB port

General information

Connect the mobile phone to the exter-

nal antenna.

Follow the information regarding the con-

nection of mobile devices to the USB port in

the section on USB connections, refer to

page 55.

Depending on the country, this provides

for better network reception and a con-

sistent reproduction quality.

In the center console

General information

When inserting the mobile phone, make

sure there are no objects between it and the

wireless charging tray.

During charging, the surface of the tray and

the mobile phone may become warm.

Higher temperatures may lead to a reduc-

tion in the charge current through the mo-

bile phone, and in isolated cases the charg-

ing process is paused temporarily. Follow

the relevant instructions in the mobile

phone owner's manual.

Depending on the equipment version, a USB

port Type A or a USB port Type A and a USB

port Type C are located in the front of the

center console.

NOTE

Properties of upper USB port:

This device has been tested for human ex-

posure limits and found compliant at a mini-

mum distance of 4 in/10 cm during opera-

tion.

–

USB port Type A.

For charging mobile devices and for

data transfer.

–

Charge current: max. 1.5 A.

194

Online Edition for Part no. 01405A02680 - II/20

Interior equipment

Therefore, a distance of 4 in/10 cm must be

CONTROLS

Functional requirements

maintained in every direction when operat-

ing the device.

–

Ignition or standby state is switched on.

–

The mobile phone must compatibly sup-

port the required Qi standard. Compati-

ble mobile phones, refer to page 53.

If the mobile phone does not support the

Qi standard, the mobile phone can be

charged using a special Qi-compatible

charging case.

–

Use only protective jackets and covers

up to a maximum thickness of

0.07 in/2 mm. Otherwise, the charging

function may be impaired.

Mounting position of the product.

Safety information

Warning

The mobile phone must not exceed the

maximum size of approximately 5.9 x

3.07 x 0.62 in/150 x 78 x 16 mm.

Overview

When charging a device that meets the Qi

standard in the wireless charging tray, any

metal objects located between the device

and the tray can become very hot. Placing

storage devices or electronic cards, such

as chip cards, cards with magnetic strips

or cards for signal transmission, between

the device and the tray may impair the

card function. There is a risk of injury and

risk of damage to property. When charg-

ing mobile devices, make sure there are no

objects between the device and the tray.

The wireless charging tray is located in the

center armrest.

1

2

3

Front holder with LED

Storage area

NOTICE

Movable clamp

The tray is intended for mobile phones up

to a particular size. Forceful inserting of

the mobile phone into the tray can damage

the tray or the mobile phone. There is a

risk of damage to property. Observe the

maximum dimensions for mobile phones.

Do not force the mobile phone into the

tray.

Inserting the mobile phone

1. Open center armrest, refer to vehicle

Owner's Manual.

2. Push back the clamp.

195

Online Edition for Part no. 01405A02680 - II/20

CONTROLS

Interior equipment

3. Insert the mobile phone with the display

facing upward in the direction of the

front holder, arrow 1.

LED displays

Color

Meaning

Blue

The mobile phone is charging.

Depending on the model, the

blue LED is no longer illuminated

once the inserted mobile phone

with Qi capability is fully

charged.

Or-

ange

The mobile phone is not charg-

ing.

Temperature on the mobile

phone possibly too high or for-

eign object in the charging tray.

4. Place the mobile phone in the storage

area, arrow 2.

5. Push the clamp forward and clamp the

mobile phone in the tray.

Red

The mobile phone is not charg-

ing.

6. Close the center armrest.

Contact a dealer’s service center

or another qualified service cen-

ter or repair shop.

Removing the mobile phone

1. Open the center armrest.

2. Push the clamp back and remove the

mobile phone.

System limits

At high temperatures on the mobile phone

or in the vehicle, the charging functions of

the mobile phone may be limited and some

functions may no longer work.

LTE-Compensator - Information

and User Manual

Your car is equipped with a wireless charg-

ing tray (WCA) to charge your mobile phone

and connect it to the mobile network. To en-

sure the best possible connection a signal

booster (LTE-Compensator) is used in con-

junction with the WCA. The following para-

graphs refer to this booster:

This is a CONSUMER device.

BEFORE USE, you MUST REGISTER THIS

DEVICE with your wireless provider and

have your provider's consent. Most wireless

providers consent to the use of Compensa-

tors. Some providers may not consent to the

use of this device on their network. If you

196

Online Edition for Part no. 01405A02680 - II/20

Interior equipment

CONTROLS

are unsure, contact your provider. You

tennas or coupling devices will cause the

MUST operate this device with approved an- cease of the booster´s operating license.

tennas and cables as specified by the manu-

The booster device fulfills the network pro-

facturer. Antennas MUST be installed at

tection standards as required by the FCC,

least 20 cm (8 inches) from any person. You

such as intermodulation limits, oscillation

MUST cease operating this device immedi-

detection and gain limits.

ately if requested by the FCC or a licensed

Booster Manufacturer: Kathrein Automotive

wireless service provider. Warning E911 lo-

Model Number: LTECOMPB0

Part Number: 6803145-01

FCC-ID: 2ACC7LTECOMPB0

cation information may not be provided or

may be inaccurate for calls served by using

this device.

Please observe additionally the following in-

formation

–

Sprint Nextel will allow consumers to

register their signal boosters by calling

their toll-free number.

–

T-Mobile online registration link:

SignalBooster#).

–

Verizon’s online registration link:

wcms/consumer/register-signal-boos-

).

–

AT&T online registration link (

online registration link

support/).

Before use you must register your booster

device with your wireless provider.

If you should be requested by the FCC to

cease operating your booster, you are not

allowed to insert your mobile phone in the

charging tray anymore unless the booster is

permanently deactivated by your local MINI

dealer.

You must not remove the booster from the

car nor use it with any other than the prein-

stalled coupling device or antenna. Any

modification of the existing antenna or cou-

pling device as well as the use of other an-

197

Online Edition for Part no. 01405A02680 - II/20

CONTROLS -> Interior equipment for Your Mini Cooper 2 Door Third Generation (2016-2023)

Related Topics

Popular Owner Manuals

Latest Owner Manuals