2001-2006 Mini One 2 Door Owner service procedures -> Towing User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Owner service procedures -> Towing for Your Mini One 2 Door First Generation (2001-2006)

126
TOWING
For towing, use either a tow bar or a nylon
rope or nylon belts that prevent sudden
jerking movements.
Tow fitting
The screw-in tow fitting is stored in the
onboard tool kit; be sure that it remains in
the vehicle at all times. This fitting is
designed for installation in the tow sockets
located at the front and rear of the vehicle.
It is intended for towing on paved road sur-
faces only.
Access to tow sockets
Use a suitable object – e.g. credit card,
screwdriver – to press out the covers from
the recess.
Firmly screw in the towing eyelet
until it stops. If this is not done, the
threads could be damaged.
Never attach tie-down hooks, chains,
straps, or tow hooks to tie rods, control
arms, or any other part of the vehicle sus-
pension, as severe damage to these compo-
nents will occur, possibly leading to acci-
dents.
<
Avoid staggered towing and be care-
ful that the towing rope is in tight
tension before starting to drive the vehicle
that is towing.
<
Tow bars
If the tow fittings of the two vehicles are
not directly opposite one another, please
note:
>Clearance and maneuvering capability
will be strictly limited in corners
>The inclination of the tow bar generates
lateral force – critical above all if the road
surface is slippery.
Do not tow a vehicle that is heavier
than the towing vehicle, otherwise it
will no longer be possible to control the
vehicle's response.
<
Online Edition for Part-No. 01 41 0 156 890 - © 09/02 BMW AG
127
OVERVIEWREPAIRS OPERATION CONTROLSDATAINDEX
TOWING
Tow-starting
It is not possible to start the engine of a
vehicle equipped with an automatic trans-
mission by towing or pushing.
For instructions on jump starting, refer to
page
124.
Never attempt to use your vehicle to push
another car, since damage to the energy-
absorbing bumpers could result.
Towing a vehicle
Only tow vehicles with Continuously
Variable automatic Transmission
(CVT) with the front wheels raised or on a
special transport vehicle, otherwise the
transmission can be damaged.
<
1. Place gear selector lever in neutral or idle
2. Towing speed:
Max. 45 mph / 70 km/h
3. Towing distance:
Max. 95 miles / 150 km
4. Leave the ignition key at position 1 to
ensure that the brake lamps, turn sig-
nals, horn and windshield wipers remain
operative, and to prevent the steering
lock detent from engaging
5. Switch on the hazard-warning system,
observe country-specific regulations.
Find some means of identifying the vehicle
in tow, for instance, place a sign or warning
triangle in the rear window.
Make sure that the ignition key
remains in position 1 even when the
electrical system has failed to prevent the
steering lock from engaging.
The steering and brakes are without power
assist when the engine is off. This means
that increased effort is required for steer-
ing and braking.
<
Towing with a commercial tow truck
>Do not tow with sling-type equipment
>Use a wheel-lift or flatbed carrier
>Please comply with applicable towing
laws.
Never allow passengers to ride in a
towed vehicle for any reason.
<
Online Edition for Part-No. 01 41 0 156 890 - © 09/02 BMW AG

Related Topics

Popular Owner Manuals