Technical data
Vehicle features and op‐
tions
This chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your vehicle, e. g., due
to the selected options or country versions. This
also applies to safety-related functions and sys‐
tems. When using these functions and systems,
the applicable laws and regulations must be
observed.
General information
The technical data and specifications in this
Owner's Manual are used as guidance values.
The vehicle-specific data can deviate from this,
e.g., due to the selected special equipment,
country version or country-specific measure‐
ment method. Detailed values can be found in
the approval documents, on labels on the vehi‐
cle or can be obtained from a dealer’s service
center or another qualified service center or re‐
pair shop.
The information in the vehicle documents al‐
ways has priority over the information in this
Owner's Manual.
Dimensions
The dimensions can vary depending on the
model version, equipment or country-specific
measurement method.
The specified heights do not take into account
attached parts, e.g., a roof antenna, roof racks
or spoiler. The heights can deviate, e.g., due to
the selected special equipment, tires, load and
chassis version.
MINI 3-door
Width with mirrors inches/mm 76.1/1,932
Width without mirrors inches/mm 68/1,727
Height inches/mm 55.7/1,414
Length inches/mm 151.1-152.5/3,837-3,874
Wheelbase inches/mm 98.2/2,495
Smallest turning radius diam. ft/m 35.5/10.8
Seite 244
REFERENCE
Technical data
244
Online Edition for Part no. 01 40 2 915 044 - X/16
English 
