Get AT A GLANCE -> Central Information Display (CID) Guide for Mini One 2 Door Fourth Generation (2024-2026)

QUICK REFERENCE

On the road

Driving

On the road

Manual transmission: switching off

1. With the vehicle at a standstill, press

the Start/Stop button.

Starting and stopping the engine

Ignition on/off

2. Shift into first gear or reverse.

3. Set the parking brake.

–

On: press the Start/Stop

button.

Steptronic transmission: switching off

1. When the vehicle is stationary, apply

the parking brake.

Most of the indica-

tor/warning lights illumi-

nate for a varied length of

time.

2. Engage selector lever position P.

3. Press the Start/Stop button.

–

Off: press the Start/Stop button again.

All indicator lights turn off.

Auto Start/Stop function

Manual transmission: switches the engine

off automatically while stationary to save

fuel. As soon as the clutch pedal is de-

pressed, the engine starts automatically.

Radio-ready state: when the ignition is

switched off, press the ON/OFF button

on the radio or when the engine is run-

ning, press the Start/Stop button.

Steptronic transmission: switches the en-

gine off automatically while stationary to

save fuel. The engine starts automatically

when the brake pedal is released.

Some electrical components remain

ready for operation.

Start/stop engine

Parking brake

Manual transmission: starting

1. Depress the brake pedal.

Apply manual parking brake

2. Press on the clutch pedal and shift to

Neutral.

The lever automatically engages after being

pulled up.

3. Press the Start/Stop button.

Releasing

Steptronic transmission: starting

1. Depress the brake pedal.

2. Engage selector lever position P or N.

3. Press the Start/Stop button.

Online Edition for Part no. 01405A7DAD4 - II/23

On the road

QUICK REFERENCE

Raise lever slightly, press the button and

guide the lever down.

To prevent the vehicle from creeping after

you select a gear position or reverse, main-

tain pressure on the brake pedal until you

are ready to drive off.

Set the electrical parking brake

Pull the switch when the vehicle is

stationary.

Selector lever lock

A lock prevents an inadvertent change from

selector lever position P to another selector

lever position and, depending on the trans-

mission version, inadvertent switching to

selector lever position P or R.

The LED and indicator illuminate.

Releasing

Manual transmission: press the switch

while the brake pedal is depressed.

To release the lock: with the brake pedal

depressed, press the button on the side of

the selector lever.

Steptronic transmission: press the switch

while the brake is depressed or selector

lever position P is set.

The LED and indicator light turn off.

The parking brake is released.

Steptronic transmission, Sport and

manual mode

Manual transmission

Shifting

When shifting into 5th or 6th gear, push

the gearshift lever to the right in order to

prevent inadvertent shifting into the 3rd or

4th gear.

Reverse gear

Select only when the vehicle is stationary.

Sport program:

Press the selector lever to the left from se-

lector lever position D.

To overcome the resistance push the gear-

shift lever dynamically to the left and en-

gage reverse gear with a forward shifting

movement.

Manual mode:

–

Downshifting: press the selector lever

forward.

–

Upshifting: pull the selector lever rear-

wards.

Steptronic transmission

Selector lever positions

Parking position P.

Reverse R.

Neutral N.

Gear position D.

Engage selector lever position P or R only

when the vehicle is stationary.

Online Edition for Part no. 01405A7DAD4 - II/23

QUICK REFERENCE

On the road

Canada: roadside parking light

Turn signal, high beams, headlight

flasher, roadside parking lights

Turn signal

To illuminate the vehicle on one side.

–

On: with the radio-ready state switched

off, press the lever either up or down

past the resistance point for approx.

2 seconds.

–

Flashing: press the lever past the resist-

ance point.

–

Off: briefly press the lever to the resist-

ance point in the opposite direction.

Triple turn signal activation: lightly tap

the lever up or down.

Brief flashing: press the lever to the

resistance point and hold it there for

as long as you want the turn signal to

flashing.

Lights and lighting

Lighting functions

Icon

Function

High beams, headlight flasher

Bad weather light.

Automatic headlight control.

Cornering light.

Lights off.

Daytime driving lights.

Parking lights.

Low beams.

Press the lever forward or pull it backward.

–

High beams on, arrow 1.

The high beams illuminate when the low

beams are switched on.

–

High beams off/headlight flasher, ar-

row 2.

Instrument lighting.

Online Edition for Part no. 01405A7DAD4 - II/23

AT A GLANCE -> Central Information Display (CID) for Your Mini One 2 Door Fourth Generation (2024-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals