2024-2026 Mini One 2 Door NOTES User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

NOTES for Your Mini One 2 Door Fourth Generation (2024-2026)

Information  
NOTES  
a vehicle’s systems performed. The EDR is  
designed to record data related to vehicle  
dynamics and safety systems for a short pe-  
riod of time, typically 30 seconds or less.  
Services from the vehicle  
manufacturer  
Where online services from the vehicle  
manufacturer are concerned, the corre-  
sponding functions are described in the ap-  
propriate place, for instance the Owner's  
Manual or manufacturer's web page. The  
relevant legal information pertaining to data  
protection may also be found on the man-  
ufacturer’s website. Personal data may be  
used to perform online services. Data is ex-  
changed over a secure connection, for in-  
stance with the IT systems of the vehicle  
manufacturer intended for this purpose.  
The EDR in this vehicle is designed to re-  
cord such data as:  
How various systems in the vehicle  
were operating.  
Whether or not the driver and passen-  
ger seat belts were fastened.  
How far, if at all, the driver was depress-  
ing the accelerator and/or brake pedal.  
How fast the vehicle was traveling.  
This data can help provide a better under-  
standing of the circumstances in which  
crashes and injuries occur.  
Any collection, processing, and use of per-  
sonal data above and beyond that needed to  
provide the services must always be based  
on a legal permission, contractual arrange-  
ment or consent. It is also possible to acti-  
vate or deactivate the data connection as a  
whole. This excludes functions and services  
required by law such as Assist systems.  
EDR data is recorded by the vehicle only  
if a nontrivial crash situation occurs; no  
data is recorded by the EDR under normal  
driving conditions and no personal data, for  
instance name, gender, age, and crash loca-  
tion, are recorded.  
Services from other providers  
However, other parties, such as law enforce-  
ment, could combine the EDR data with the  
type of personally identifying data routinely  
acquired during a crash investigation.  
When using online services from other pro-  
viders, these services are the responsibility  
of the relevant provider and subject to their  
data privacy conditions and terms of use.  
The vehicle manufacturer has no influence  
on the content exchanged during this proc-  
ess. Information on the way in which per-  
sonal data is collected and used in relation  
to services from third parties, the scope of  
such data, and its purpose, can be obtained  
from the relevant service provider.  
To read data recorded by an EDR, special  
equipment is required, and access to the  
vehicle or the EDR is needed. In addition  
to the vehicle manufacturer, other parties,  
such as law enforcement, that have the spe-  
cial equipment, can read the information if  
they have access to the vehicle or the EDR.  
Vehicle identification number  
Event Data Recorder (EDR)  
General information  
This vehicle is equipped with an event  
data recorder (EDR). The main purpose of  
an EDR is to record, in certain crash or  
near crash-like situations, such as an air  
bag deployment or hitting a road obstacle,  
data that will assist in understanding how  
Depending on the national-market equip-  
ment, the vehicle identification number is  
located in different positions in the vehicle.  
This chapter describes all possible positions  
for the series.  
13  
Online Edition for Part no. 01405A7DAD4 - II/23  
NOTES  
Information  
Engine compartment  
Left nameplate  
For 3-door models:  
The engraved vehicle identification number  
can be found in the engine compartment, on  
the right-hand side of the vehicle.  
The vehicle identification number can be  
found on the nameplate, on the left-hand  
side of the vehicle.  
Right nameplate  
For 3-door models:  
For 5-door models:  
The vehicle identification number can be  
found on the nameplate, on the left-hand  
side of the vehicle.  
The vehicle identification number can be  
found on the nameplate, on the right-hand  
side of the vehicle.  
Windshield  
For 5-door models:  
The vehicle identification number can be  
found on the nameplate, on the right-hand  
side of the vehicle.  
The vehicle identification number can also  
be found behind the windshield.  
14  
Online Edition for Part no. 01405A7DAD4 - II/23  
Information  
NOTES  
Reporting safety defects  
For US customers  
The following only applies to vehicles  
owned and operated in the US.  
If you believe that the vehicle has a defect  
which could cause a crash or could cause  
injury or death, you should immediately in-  
form the National Highway Traffic Safety  
Administration NHTSA, in addition to noti-  
fying MINI of North America, LLC, P.O. Box  
1227, Westwood, New Jersey 07675-1227,  
Telephone 1-800-831-1117.  
If NHTSA receives similar complaints, it  
may open an investigation, and if it finds  
that a safety defect exists in a group of  
vehicles, it may order a recall and remedy  
campaign.  
However, NHTSA cannot become involved  
in individual problems between you, your  
dealer, or MINI of North America, LLC.  
To contact NHTSA, you may call the Vehicle  
Safety Hotline toll-free at 1-888-327-4236  
(TTY: 1-800-424-9153); go to http://  
tor, NHTSA, 1200 New Jersey Avenue, SE.,  
Washington, DC 20590. You can also ob-  
tain other information about motor vehicle  
For Canadian customers  
Canadian customers who wish to report a  
safety-related defect to Transport Canada,  
Defect Investigations and Recalls, may call  
the toll-free hotline 1-800-333-0510. You  
can also obtain other information about mo-  
roadsafety.  
15  
Online Edition for Part no. 01405A7DAD4 - II/23  
QUICK REFERENCE  
Getting in  
Getting in  
Buttons for the central locking  
system  
Opening and closing  
Buttons on the vehicle key  
Overview  
1
2
3
Unlocking  
Buttons for the central locking system.  
Locking  
Unlocking the tailgate  
Locking  
4
Panic mode  
Pressing the button locks the vehi-  
cle if the front doors are closed.  
Unlocking the vehicle  
Unlocking  
Press the button on the vehicle key.  
Pressing the button unlocks the ve-  
hicle.  
Depending on the settings, either only the  
driver's door or all vehicle access points are  
unlocked.  
Panic mode  
You can trigger the alarm system if you find  
yourself in a dangerous situation.  
If only the driver's door is unlocked, press  
the button on the vehicle key again to un-  
lock the other vehicle access points.  
Press the button on the vehicle key  
and hold for at least 3 seconds.  
Press and hold the button on the  
vehicle key after unlocking.  
To switch off the alarm: press any button.  
The windows and the glass sunroof are  
opened, as long as the button on the vehicle  
key is pressed.  
Comfort Access  
Principle  
Locking the vehicle  
The vehicle can be accessed without operat-  
ing the vehicle key.  
Press the button on the vehicle key.  
Carrying the vehicle key with you, e.g., in  
your pants pocket, is sufficient.  
All vehicle access points are locked.  
16  
Online Edition for Part no. 01405A7DAD4 - II/23  
Getting in  
QUICK REFERENCE  
The vehicle automatically detects the vehi-  
cle key when it is in close proximity or in  
the interior.  
Unlock the vehicle and then press the  
button on the outer side of the tailgate.  
Press and hold the button on the  
vehicle key for approx. 1 sec-  
ond.  
Unlocking the vehicle  
Depending on the setting, the doors may  
also be unlocked.  
Closing  
Closing the tailgate manually.  
Displays and control elements  
Press the button on the door handle of the  
driver's or front passenger door.  
In the vicinity of the steering  
wheel  
Locking the vehicle  
1
2
Low beams, fog lights  
High beams, headlight flasher, turn sig-  
nal  
Press the button on the door handle of the  
driver's or front passenger door.  
3
4
Instrument cluster  
Window wiper system  
Tailgate  
Indicator/warning lights  
Unlocking  
The indicator/warning lights can illuminate  
in a variety of combinations and colors.  
Several of the lights are checked for  
proper functioning and illuminate tempora-  
rily when the engine is started or the igni-  
tion is switched on.  
Driver's door  
For 3-door models:  
17  
Online Edition for Part no. 01405A7DAD4 - II/23  
QUICK REFERENCE  
Getting in  
Central Information Display (CID)  
Principle  
The Central Information Display (CID) com-  
bines the functions of a multitude of  
switches. These functions can be operated  
via the Controller.  
Buttons on the Controller  
Button Function  
1
2
Power windows  
Exterior mirrors  
Press once: calls up the main  
menu.  
For 5-door models:  
Press twice: displays all menu  
items of the main menu.  
Call up the Communication  
menu.  
Call up the Media/Radio menu.  
Call up the destination input  
menu for navigation.  
1
2
3
Safety switch  
Call up the CarPlay menu.  
Power windows  
Exterior mirrors  
Call up the navigation map.  
All around the selector lever  
Press once: opens the previous  
display.  
Press and hold: open the menus  
used last.  
Call up the Options menu.  
Voice control  
Activating the voice control system  
1
2
3
Selector lever  
Controller with buttons  
Parking brake, manual or electric  
Press the button on the steering  
wheel.  
Wait for the signal tone.  
Say the command.  
18  
Online Edition for Part no. 01405A7DAD4 - II/23  
Getting in  
QUICK REFERENCE  
This icon indicates that the voice acti-  
vation system is active.  
If no other commands are available, oper-  
ate the function via the Central Information  
Display (CID).  
Ending the voice control system  
Press the button on the steering  
wheel or ›Cancel‹.  
19  
Online Edition for Part no. 01405A7DAD4 - II/23  
QUICK REFERENCE  
Set-up and use  
Set-up and use  
Adjusting the exterior mirrors  
Seats, mirrors and steering  
wheel  
Manually adjustable seats  
1
2
Adjusting  
Selecting a mirror, Automatic Curb Mon-  
itor  
3
Folding in and out  
1
2
3
4
Longitudinal direction  
Thigh support  
Height  
Adjusting the steering wheel  
In four directions  
Backrest tilt  
Adjusting the head restraint  
Height  
1. Fold the lever down.  
2. Move the steering wheel to the prefer-  
red height and angle to suit your seat  
position.  
To raise: push the head restraint up.  
3. Fold the lever back up.  
To lower: press the button, arrow 1, and  
push the head restraint down.  
20  
Online Edition for Part no. 01405A7DAD4 - II/23  
Set-up and use  
QUICK REFERENCE  
Entering the rear  
Button Function  
1. Pull lever up to the stop.  
Programmable memory buttons.  
Changeover of wave range/satel-  
lite radio.  
Navigation destination input  
Entering a destination via address  
State/province  
2. Fold backrest forward.  
3. Push the seat forward.  
1.  
2.  
"Navigation"  
"Enter address"  
3. "State/Province?"  
Original position  
4. Select the country from the list.  
1. Push the seat back into the initial posi-  
tion.  
Entering the address  
2. Fold back the backrest to lock the seat.  
The address can be entered in any order.  
Example: entering the address via the town/  
city  
Infotainment  
1. "City/Postal code?"  
2. Enter the town/city.  
Radio  
The list is narrowed down further with  
each entry.  
Buttons and functions  
Depending on the country and equipment  
version, the radio has the following buttons.  
3.  
Select the icon.  
4. Select a town/city from the list.  
5. If necessary, enter the street.  
Button Function  
Press: turns sound output on/off.  
Turn: adjusts the volume.  
6. Select the street as you would the town/  
city.  
7. If necessary, enter a house number.  
Change the entertainment  
source.  
8.  
Select the icon.  
Press once: changes the station/  
track.  
9. Select a house number or range of house  
numbers from the list.  
Press and hold: fast forward/re-  
wind the track.  
Starting destination guidance  
"Start guidance"  
Destination guidance is started to the town/  
city center if no street is entered.  
21  
Online Edition for Part no. 01405A7DAD4 - II/23  
QUICK REFERENCE  
Set-up and use  
Pairing the mobile phone  
Using the telephone  
Accepting a call  
Incoming call can be accepted via the Cen-  
tral Information Display (CID) or the button  
on the steering wheel.  
After the mobile phone is paired once with  
the vehicle, the mobile phone can be oper-  
ated using the Central Information Display  
(CID), the steering wheel buttons and spo-  
ken instructions.  
1.  
"My MINI"  
Via the Central Information Display (CID)  
2. "System settings"  
3. "Mobile devices"  
4. "Connect new device"  
"Accept"  
Via the button on the steering wheel  
Press the button.  
The vehicle's Bluetooth name is dis-  
played on the control display.  
Via the instrument cluster  
5. Select the functions for which the mo-  
bile phone is to be used.  
Use the OK button on the steering wheel to  
select: "Accept"  
6. To perform additional functions with  
your mobile phone, e.g., to search for/  
connect a Bluetooth device or new de-  
vice, please refer to your mobile phone's  
operating instructions.  
Dialing a number  
1.  
"Communication"  
2. "Dial number"  
The vehicle's Bluetooth name is shown  
on your mobile phone's display. Select  
the vehicle's Bluetooth name.  
3. Select the numbers individually.  
4.  
Select the icon.  
Establish the connection via the additional  
telephone:  
7. Depending on the mobile device, a con-  
trol number is displayed or the control  
number must be entered.  
1.  
Press the button.  
Compare the control number dis-  
played on the control display with  
the control number displayed on the  
mobile device. Confirm the control  
number on the device and on the  
control display.  
2. "Call via"  
Apple CarPlay preparation  
Principle  
Enter and confirm the same control  
number on the device and via the  
Central Information Display (CID).  
CarPlay allows select functions of a compat-  
ible Apple iPhone to be used via Siri voice  
control and the on-board monitor.  
The device is connected and displayed in  
the device list.  
Functional requirements  
Compatible iPhone: iPhone 5 or later  
with iOS 7.1 or later.  
Corresponding mobile contract.  
Bluetooth, Wi-Fi, and Siri voice control  
are activated on the iPhone.  
22  
Online Edition for Part no. 01405A7DAD4 - II/23  
Set-up and use  
QUICK REFERENCE  
If necessary, the setting for mobile data  
must be activated on the iPhone.  
Wi-Fi and Bluetooth are enabled in the  
vehicle.  
Turning on Bluetooth and CarPlay  
Via the Central Information Display (CID):  
1.  
"My MINI"  
2. "System settings"  
3. "Mobile devices"  
4. "Settings"  
5. Select the following settings:  
"Bluetooth®"  
"Apple CarPlay"  
Pairing the iPhone with CarPlay  
Pair iPhone via Bluetooth with the vehicle.  
Select CarPlay as the function:  
"Apple CarPlay"  
The iPhone is connected to the vehicle and  
displayed in the device list.  
23  
Online Edition for Part no. 01405A7DAD4 - II/23  
QUICK REFERENCE  
On the road  
Driving  
On the road  
Manual transmission: switching off  
1. With the vehicle at a standstill, press  
the Start/Stop button.  
Starting and stopping the engine  
Ignition on/off  
2. Shift into first gear or reverse.  
3. Set the parking brake.  
On: press the Start/Stop  
button.  
Steptronic transmission: switching off  
1. When the vehicle is stationary, apply  
the parking brake.  
Most of the indica-  
tor/warning lights illumi-  
nate for a varied length of  
time.  
2. Engage selector lever position P.  
3. Press the Start/Stop button.  
Off: press the Start/Stop button again.  
All indicator lights turn off.  
Auto Start/Stop function  
Manual transmission: switches the engine  
off automatically while stationary to save  
fuel. As soon as the clutch pedal is de-  
pressed, the engine starts automatically.  
Radio-ready state: when the ignition is  
switched off, press the ON/OFF button  
on the radio or when the engine is run-  
ning, press the Start/Stop button.  
Steptronic transmission: switches the en-  
gine off automatically while stationary to  
save fuel. The engine starts automatically  
when the brake pedal is released.  
Some electrical components remain  
ready for operation.  
Start/stop engine  
Parking brake  
Manual transmission: starting  
1. Depress the brake pedal.  
Apply manual parking brake  
2. Press on the clutch pedal and shift to  
Neutral.  
The lever automatically engages after being  
pulled up.  
3. Press the Start/Stop button.  
Releasing  
Steptronic transmission: starting  
1. Depress the brake pedal.  
2. Engage selector lever position P or N.  
3. Press the Start/Stop button.  
24  
Online Edition for Part no. 01405A7DAD4 - II/23  
On the road  
QUICK REFERENCE  
Raise lever slightly, press the button and  
guide the lever down.  
To prevent the vehicle from creeping after  
you select a gear position or reverse, main-  
tain pressure on the brake pedal until you  
are ready to drive off.  
Set the electrical parking brake  
Pull the switch when the vehicle is  
stationary.  
Selector lever lock  
A lock prevents an inadvertent change from  
selector lever position P to another selector  
lever position and, depending on the trans-  
mission version, inadvertent switching to  
selector lever position P or R.  
The LED and indicator illuminate.  
Releasing  
Manual transmission: press the switch  
while the brake pedal is depressed.  
To release the lock: with the brake pedal  
depressed, press the button on the side of  
the selector lever.  
Steptronic transmission: press the switch  
while the brake is depressed or selector  
lever position P is set.  
The LED and indicator light turn off.  
The parking brake is released.  
Steptronic transmission, Sport and  
manual mode  
Manual transmission  
Shifting  
When shifting into 5th or 6th gear, push  
the gearshift lever to the right in order to  
prevent inadvertent shifting into the 3rd or  
4th gear.  
Reverse gear  
Select only when the vehicle is stationary.  
Sport program:  
Press the selector lever to the left from se-  
lector lever position D.  
To overcome the resistance push the gear-  
shift lever dynamically to the left and en-  
gage reverse gear with a forward shifting  
movement.  
Manual mode:  
Downshifting: press the selector lever  
forward.  
Upshifting: pull the selector lever rear-  
wards.  
Steptronic transmission  
Selector lever positions  
Parking position P.  
Reverse R.  
Neutral N.  
Gear position D.  
Engage selector lever position P or R only  
when the vehicle is stationary.  
25  
Online Edition for Part no. 01405A7DAD4 - II/23  
QUICK REFERENCE  
On the road  
Canada: roadside parking light  
Turn signal, high beams, headlight  
flasher, roadside parking lights  
Turn signal  
To illuminate the vehicle on one side.  
On: with the radio-ready state switched  
off, press the lever either up or down  
past the resistance point for approx.  
2 seconds.  
Flashing: press the lever past the resist-  
ance point.  
Off: briefly press the lever to the resist-  
ance point in the opposite direction.  
Triple turn signal activation: lightly tap  
the lever up or down.  
Brief flashing: press the lever to the  
resistance point and hold it there for  
as long as you want the turn signal to  
flashing.  
Lights and lighting  
Lighting functions  
Icon  
Function  
High beams, headlight flasher  
Bad weather light.  
Automatic headlight control.  
Cornering light.  
Lights off.  
Daytime driving lights.  
Parking lights.  
Low beams.  
Press the lever forward or pull it backward.  
High beams on, arrow 1.  
The high beams illuminate when the low  
beams are switched on.  
High beams off/headlight flasher, ar-  
row 2.  
Instrument lighting.  
26  
Online Edition for Part no. 01405A7DAD4 - II/23  
On the road  
QUICK REFERENCE  
Rain sensor  
Window wiper system  
Activate/deactivate  
Turning the wipers on/off and flick  
wipe  
Turning on  
To activate: press the lever up once from its  
basic setting, arrow 1.  
To deactivate: press the lever back into the  
basic setting.  
Press the lever up until the desired position  
is reached.  
Resting position of the wipers: posi-  
tion 0.  
Set interval period or sensitivity of the  
rain sensor  
Rain sensor: position 1.  
Normal wiper speed: position 2.  
Fast wiper speed: position 3.  
Turning off and flick wipe  
Turn the thumbwheel on the wiper lever.  
Cleaning the windshield  
Press the lever down.  
Switching off: press the lever down until  
it reaches its basic setting.  
Flick wipe: press the lever down from  
the basic setting.  
Pull the lever.  
27  
Online Edition for Part no. 01405A7DAD4 - II/23  

Related Topics

Popular Owner Manuals