SIC2475
The hazard indicator flasher switch operates with the
ignition switch in any position except when the battery
is discharged.
The hazard indicator flasher is used to warn other
drivers when you have to stop or park under
emergency conditions.
When the hazard indicator flasher switch is pushed, all
turn signal lights will flash. To turn off the hazard
indicator flasher, push the hazard indicator flasher
switch again.
WARNING:
. Be sure to apply the parking brake firmly.
. Be sure to move the shift lever to the “R”
(Reverse) position (Manual Transmiss ion
(MT) model).
. Be sure to move the shift lever to the “P”
(Park) position. (Automatic Transmission
(AT)/Continuously Variable Tr ansmission
(CVT) model)
. Never change tires when the vehicle is on a
slope, ice or slippery area. This is hazardous.
. Never change tires when the oncoming
traffic is close to your vehicle. Call for
professional road assistance.
1. Safely move the vehicle off the road away from
traffic.
2. Turn on the hazard indicator flasher lights.
3. Park on a level surface.
4. Apply the parking brake.
5. Automatic Transmission (AT)/Continuously Vari-
able Transmission (CVT) model: Move the shift
lever to the “P” (Park) position.
Manual Transmission (MT) model: Move the shift
lever to the “R” (Reverse) position.
6. Turn off the engine.
7. Open the hood and set up the warning triangle (if
equipped):
.
To warn other traffic.
.
To signal professional road assistance person-
nel that you need assistance.
8. Have all passengers get out from the vehicle and
stand in a safe place, away from other traffic and
clear of the vehicle.
PREPARING TOOLS
SCE0902
Raise the back door floor cover.
Your vehicle is equipped with either a spare tire or an
emergency tire puncture repair kit. Carefully read the
instructions provided in the appropriate section.
HAZARD INDICATOR FLASHER
SWITCH
FLAT TIRE