
GUID-D4BB903A-595E-4205-89D2-80046242DCF1
WARNING:
. The hood must be closed and latched
securely before driving. Failure to do so
could cause the hood to fly open and result
in an accident.
. Never open the hood if steam or smoke is
coming from the engine compartment to
avoid injury.
OPENING HOOD
GUID-A821C2A5-AC80-4D40-AE09-B346B03AEE55
JVP0217X
1. Pull the hood lock release handle
*
1
located
below the instrument panel until the hood springs
up.
2. Locate the lever
*
2
in between the hood and
grille and push the lever sideways wi th your
fingertips.
3. Raise the hood
*
3
.
4. Remove the support rod
*
4
and insert it into the
slot
*
5
.
Hold the coated parts
*
A
when removing or
resetting the support rod. Avoid direct contact
with the metal parts, as they may be hot
immediately after the engine has been stopped.
CLOSING HOOD
GUID-69669184-677B-4A17-B774-7453B385BA17
1. While supporting the hood, return the support rod
to its original position.
2. Slowly lower the hood to about 20 to 30 cm (8 to
12 in) above the hood lock, then let it drop.
3. Make sure it is securely latched.
CAUTION:
Before closing the hood, be sure to release the
support rod and store it in position. Otherwise,
the support rod will be damaged.
Pre-driving checks and adjustments 3-19
HOOD