2004-2009 Nissan Micra 4 Door Pre-driving checks and adjustments -> Intelligent Key system (if equipped) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Pre-driving checks and adjustments -> Intelligent Key system (if equipped) for Your Nissan Micra 4 Door Third Generation (2004-2009)

. When the selective door unlock mode is set, the
hazard indicator flashes 3 times.
. When the all door unlock mode is set, the hazard
indicator flashes once.
Using panic alarm (if equipped)
GUID-D6763626-705A-45DA-ADCE-6C03E7A384E5
If you are near your vehicle and feel threatened, you
may activate the alarm to call attention as follows:
1. Push the “PANIC”
button
*
3
on the remote
controller for more than 0.5 second.
2. The thef t warning alar m will stay on for 25
seconds.
3. The panic alarm stops when:
. It has run for 25 seconds, or
. Any of the buttons on the remote controller are
pushed. (Note: Panic button should be pushed for
more than 0.5 second.)
Battery indicator light
GUID-B0D44796-0217-4BF1-8ECA-5F0B7DE7A3C2
The battery indicator light
*
4
(Type A) or
*
3
(Type B)
illuminates when you push any button. If the light does
not illuminate, the battery is weak or needs replace-
ment. For information regarding replacement of a
battery, see “Remote controller battery” (P.8-25).
Hazard indicator operation (if equipped)
GUID-3E887246-B122-4252-A41B-AD8DFF22C927
When you lock or unlock the doors, the hazard
indicator will flash as a confirmation.
. “LOCK”: The hazard indicator flashes once.
. “UNLOCK”: The hazard indicator flashes twice.
GUID-54B03DCC-AB84-434F-ABCA-E9795B0D4D6F
SPA2406
Type A (with panic alarm)
SPA2502
Type B (without panic alarm)
1. Intelligent Key (2)
2. Mechanical key (inside the Intelligent Key) (2)
3. Key number plate
WARNING:
. Radio waves could adversely affect electric
medical equipment. Those who use a pace-
maker should contact the electric medical
equipment manufacturer for the possibl e
influences before use.
. The Intelligent Key transmits radio waves
when the buttons are pushed. The radio
waves may affect aircraft navigation and
communication systems. Do not operate the
Intelligent Key while on an airplane. Make
sure the buttons are not operated uninten-
tionally when the unit is stored during a
flight.
The Intelligent Key system can operate all the door
(including the back door) locks using the remote
controller function or pushing the request switch on
the vehicle without taking the key out from a pocket or
purse. The operating environment and/or conditions
may affect the Intelligent Key system operation.
Be sure to read the following before using the
Intelligent Key system.
CAUTION:
. Be sure to carry the Intelligent Key with you
when operating the vehicle.
. Never leave the Intelligent Key in the vehicle
when you leave the vehicle.
. When the outside temperature is extremely
low, the Intellige nt Key system ma y not
function properly.
The Intelligent Key is always communicating with the
vehicle as it receives radio waves. The Intelligent Key
system transmits weak radio waves. Environmental
conditions may interfere with the operation of the
Intelligent Key system under the following operating
conditions.
. When operating near a location where strong
radio waves are transmitted, such as a TV tower,
power station and broadcasting station.
. When in possession of wireless equipment, such
as a cellular telephone, transceiver, and CB radio.
Pre-driving checks and adjustments 3-9
INTELLIGENT KEY SYSTEM (if
equipped)
3-10 Pre-driving checks and adjustments
. When the Intelligent Key is in contact with or
covered by metallic materials.
. When any type of radio wave remote control is
used nearby.
. When the Intelligent Key is placed near an electric
appliance such as a personal computer.
. When the vehicle is parked near a parking meter.
In such cases, correct the operating conditions before
using the Intelligent Key function or use the mechanical
key.
Although the life of the battery varies depending on the
operating conditions, the battery’s life is approximately
2 years. If the battery is discharged, replace it with a
new one.
For information regarding replacement of a battery, see
“Intelligent Key battery” (P.8-26).
Since the Intelligent Key is continuously receiving radio
waves, if the key is left near equipment which transmits
strong radio waves, such as signals from a TV and
personal computer, the battery life may become
shorter.
To start the engine when the Intelligent Key battery is
discharged, see “Push-button ignition switch (model
with Intelligent Key system)” (P.5-6). Replace the
discharged battery with a new on e as soon as
possible.
Because the steering wheel is locked electrically,
unlocking the steering wheel with the ignition switch in
the “LOCK” position is impossible when the vehicle
battery is completely discharged. In this case, unlock-
ing the steering wheel would be also impossible. Pay
special attention that the vehicle battery is not
completely discharged.
As many as 4 Intelligent Keys can be used with one
vehicle. For information about the purchase and use of
additional Intelligent Keys, contact a NISSAN dealer.
CAUTION:
. Do not allow the Intelligen t Key, which
contains electrical compon ents, to come
into contact with water or salt water. This
could affect the system function.
. Do not drop the Intelligent Key.
. Do not strike the Intelligent Key sharply
against another object.
. Do not change or modify the Intelligent Key.
. Wetting may damage the Intelligent Key. If
the Intelligent Key gets wet, immediately
wipe until it is completely dry.
. If the outside temperature is below −108C
(148F), the battery of the Intelligent Key may
not function properly.
. Do not place the Intelligent Ke y for an
extended period in an area where tempera-
tures exceed 608C (1408F).
. Do not attach the Intelligent Key with a key
holder that contains a magnet.
. Do not place the Intelligent Key near equip-
ment that produces a magnetic field, such as
a TV, audio equipment and personal compu-
ters or cellular phones.
If an Intelligent Key is lost or stolen, NISSAN
recommends erasing the ID code of that Intelligent
Key from the vehicle. This may prevent the unauthor-
ized use of the Intelligent Key to operate the vehicle.
For information regarding the erasing procedure,
contact a NISSAN dealer.
The Intelligent Key function can be disabled. For
information about disabling the Intelligent Key function,
contact a NISSAN dealer.
OPERATING RANGE
GUID-7E292D86-EFD4-4E00-AF4F-BED5FFEA42FA
SPA2038
The Intelligent Key functions can only be used when
the Intelligent Key is within the specified operating
range from the request switch
*
1
.
When the Intelligent Key battery is discharged or
strong radio waves are present near the operating
location, the Intelligent Key system’s operating range
becomes narrower, and the Intelligent Key may not
function properly.
The operating range is within 80 cm (31.50 in) from
each request switch
*
1
.
If the Intelligent Key is too close to the door glass,
handle or rear bumper the request switches may not
function.
When the Intelligent Key is within the operating range,
it is possible for anyone, even someone who does not
carry the Intelligent Key, to push the request switch
and lock/unlock the doors.
USING INTELLIGENT KEY SYSTEM
GUID-0057CA0E-D3B7-40DB-BEF7-568F9FFBFB67
SPA2408
The request switch will not function under the following
conditions:
. When the Intelligent Key is left inside the vehicle
. When the Intelligent Key is not within the
operational range
. When any door is open or not closed securely
. When the Intelligent Key battery is discharged
. When the ignition switch is in the “ACC” or “ON”
position
SPA2407
. Do not push the door handle request switch with
the Intelligent Key held in your hand as illustrated.
The close distance to the door handle will cause
the Intelligent Key system to have difficulty
recognizing that the Intelligent Key is outside the
vehicle.
. After locking the doors using the door handle
request switch, make sure that the doors have
been securely locked by operating the door
handles.
. When locking the doors using the door handle
request switch, make sure to have the Intelligent
Key in your possession before operating the door
handle request switch to prevent the Intelligent
Key from being left in the vehicle.
. The door handle request switch is operational only
when the Intelligent Key has been detected by the
Intelligent Key system.
. Do not pull the door handle before pushing the
door handle request switch. The door will be
unlocked but will not open. Release the door
handle once and pull it again to open the door.
Pre-driving checks and adjustments 3-11
3-12 Pre-driving checks and adjustments
Request switch locations
GUID-52365DD2-3AF3-44A0-AEC6-93A083C8517A
JVP0215X
JVP0216X
When you carry the Intelligent Key with you, you can
lock or unlock all doors by pushing the door handle
request switch (driver’s or front passenger’s)
*
A
or
back door request switch
*
B
within the range of
operation.
When you lock or unlock the doors, the hazard
indicator will flash as a confirmation.
Locking doors
GUID-C9BDCA89-915E-40E4-B114-FA9EA318DB8B
1. Push the ignition switch to the “OFF” position.
2. Carry the Intelligent Key with you.
3. Close all doors.
4. Push the door handle request switch
*
A
(driver’s
or front passenger’s) or the back door request
switch
*
B
.
5. All doors and the back door will be locked.
6. The hazard indicator flashes once.
7. Operate door handles to confirm that the doors
have been securely locked.
Lockout protection:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To prevent the Intelligent Key from being accidentally
locked in the vehicle, lockout protection is equipped
with the Intelligent Key system.
. When the Intelligent Key is left in the vehicle and
you try to lock the door using the driver’s inside
lock knob after getting out of the vehicle, all the
doors will unlock automatically and a chime will
sound after the door is closed.
. When the Intelligent Key is left in the vehicle while
the driver’s door is opened and you try to lock the
door using the power door lock switch after
getting out of the vehicle, an inside warning chime
will sound after the power door lock switch or the
driver’s inside lock knob is operated.
CAUTION:
The lockout protection may not function under
the following conditions:
. When the Intelligent Key is placed on top of
the instrument panel.
. When the Intelligent Key is placed inside of
the glove box.
. When the Intelligent Key is placed inside of
the door pockets.
. When the Intelligent Key is placed on or
under the spare tire area.
. When the Intelligent Key is placed inside or
near metallic materials.
The lockout protection may function when the
Intelligent Key is outside the vehicle but is too
close to the vehicle.
Unlocking doors
GUID-A1A16FFD-3BD9-44CF-9882-FBB8D087CA93
All door unlock:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
1. Carry the Intelligent Key with you.
2. Push the door handle request switch
*
A
or back
door request switch
*
B
.
3. All doors and the back door will be unlocked.
4. The hazard indicator flashes twice.
If a door handle is pulled while unlocking the doors,
that door may not be unlocked. Returning the door
handle to its original position will unlock the door. If the
door does not unlock, after returning the door handle,
push the door handle request switch to unlock the
door.
Selective door unlock mode:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
1. Carry the Intelligent Key with you.
2. Push the door handle request switch (driver’s or
front passenger’s)
*
A
or back door request
switch
*
B
.
3. The corresponding door will be unlocked.
4. Push the door handle request switch (driver’s or
front passenger’s)
*
A
or back door request
switch
*
B
again within 5 seconds.
5. All doors will be unlocked.
Switching door unlock mode (if equipped):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To switch the door unlock mode from one to another,
see “Using remote keyless entry system” (P.3-8).
Automatic relock:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
All doors will be locked automatically unless one of the
following operations is performed within 30 seconds
after pushing the request switch while the doors are
locked.
. Opening any doors.
. Pushing the ignition switch.
If during the preset time period the “UNLOCK”
button on the Intelligent Key is pushed, all doors will be
locked automatically after the next preset time.
BATTERY SAVER SYSTEM
GUID-EAB42E7F-FC9B-41C3-9D25-102BDE1FB88C
When all the following conditions are met for a period
of time, the battery saver system will cut off the power
supply to prevent battery discharge.
. The ignition switch is in the “ACC” position, and
. All doors are closed, and
. The shift lever is in the “P” (Park) position
(Automatic transmission/Continuously Variable
Transmission model).
WARNING AND AUDIBLE REMINDERS
GUID-B063A4EE-5D84 -441F-8EB4-01BD9EBF8926
The Intelligent Key system is equipped with a function
that is designed to minimize improper operations of the
Intelligent Key and to help prevent the vehicle from
being stolen.
Type A (model with vehicle information dis-
play)
GUID-99B71BFD-368B-430F-B852-2DFF473A6623
The warning buzzer sounds and the warning display
appears on the dot matrix display (in the vehicle
information display) when improper operations are
detected. See the troubleshooting guide on the next
page. For warning and indicators on the vehicle
information display, see “Vehicle information display”
(P.2-20).
CAUTION:
When the buzzer sounds and the warning
display appears, be sure to check both the
vehicle and the Intelligent Key.
Type B (model without dot matrix display)
GUID-FBD0794B-E277-4C07-AE0F-F6CAB9BF85FB
A chime or beep sounds inside and outside the vehicle
and a warning light illuminates or blinks.
See the troubleshooting guide on the next page and
“Warning/indicator lights and audible reminders” (P.2-
12).
Intelligent Key system warning light:
P position selecting warning light:
CAUTION:
When the chime or beep sounds or the warning
light illuminates or blinks, be sure to check both
the vehicle and the Intelligent Key.
Pre-driving checks and adjustments 3-13
3-14 Pre-driving checks and adjustments
TROUBLE SHOOTING GUIDE
GUID-E24EB79C-8A58-4F10-B2B1-8C3006C4D176
Symptom Possible cause Action to take
When pushing the ignition switch to stop
the engine
Type A: The SHIFT P warning appears on
the display and the inside warning chime
sounds continuously or for a few sec-
onds.
Type B: The P position selecting warning
light in the meter and the inside warning
chime sounds continuously (Automatic
Transmission and Continuously Variable
Transmission models).
The shift lever is not in the “P” (Park)
position.
Shift the shift lever to the “P” (Park)
position.
When shifting the shift lever to the P
(Park) position. (Automatic Transmission
and Continuously Variable Transmission
models)
The inside warning chime sounds con-
tinuously.
The ignition switch is in the “ACC” or
“ON” position.
Push the ignition switch to the “OFF”
position.
When opening the driver’s door to get
out of the vehicle
The inside warning chime sounds con-
tinuously.
The ignition switch is in the “ACC”
position.
Push the ignition switch to the “OFF”
position.
When closing the door after getting out
of the vehicle
Type A: The NO KEY warning appears on
the display, the outside chime sounds 3
times and the inside warning chime
sounds for a few seconds.
Type B: The Intelligent Key system
warning light in the meter blinks in yellow,
the outside chime sounds 3 times and
the inside warning chime sounds for a
few seconds.
The ignition switch is in the “ACC” or
“ON” position.
Push the ignition switch to the “OFF”
position.
Type A: The SHIFT P warning appears on
the display and the outside chime sounds
continuously.
Type B: The P position selecting warning
light in the meter illuminates and the
outside chime sounds continuously
(Automatic Transmission and Continu-
ously Variable Transmission models).
The ignition switch is in the “ACC” or
“OFF” position and the shift lever is not in
the “P” (Park) position.
Move the shift lever to the “P” (Park)
position and push the ignition switch to
the “OFF” position.
When pushing the request switch or the
“LOCK”
button on the Intelligent
Key to lock the door
The outside chime sounds for a few
seconds and all the doors unlock.
The Intelligent Key is inside the vehicle. Carry the Intelligent Key with you.
The ignition switch is in the “ACC” or
“ON” position.
Push the ignition switch to the “OFF”
position.
A door is not closed securely.
Close the door securely.
Symptom Possible cause Action to take
When pushing the door handle request
switch to lock the door
The outside chime sounds for a few
seconds.
The Intelligent Key is inside the vehicle. Carry the Intelligent Key with you.
A door is not closed securely. Close the door securely.
When pushing the ignition switch to start
the engine
Type A: The Intelligent Key battery
indicator appears on the display.
Type B: The Intelligent Key system
warning light in the meter blinks in green.
The battery charge is low.
Replace the battery with a new one. (See
“Battery” (P.8-24).)
Type A: The NO KEY warning appears on
the display and the inside warning chime
sounds for a few seconds.
Type B: The Intelligent Key system
warning light in the meter blinks in yellow
and the inside warning chime sounds for
a few seconds.
The Intelligent Key is not in the vehicle.
Carry the Intelligent Key with you.
Pre-driving checks and adjustments 3-15
3-16 Pre-driving checks and adjustments
USING REMOTE KEYLESS ENTRY FUNC-
TION
GUID-D7DD2C27-DB02-4C14-9855-72C75BE1B433
Operating range
GUID-41D04F4F-F132-486C-9458-BA65FA2C405D
SPA2252
Type A (with panic alarm)
SPA2045
Type B (without panic alarm)
It is possible to lock/unlock all doors including the back
door using the remote keyless entry system. The
operating distance depends upon the conditions
around the vehicle. To securely operate the lock and
unlock buttons, approach the vehicle to about 1 m (3.3
ft) from the door.
The remote keyless entry system will not function under
the following conditions:
. When the Intelligent Key is not within the
operational range.
. When the Intelligent Key battery is discharged.
For information regarding the replacement of a battery,
see “Battery” (P.8-24).
Locking doors
GUID-563449DF-CC39-466F-B274-BC462CD1D060
When you lock or unlock the doors including the back
door, the hazard indicator will flash as a confirmation.
1. Place the ignition switch in the “OFF” position and
carry the Intelligent Key.
2. Close all doors (including the back door).
3. Push the “LOCK”
button
*
1
on the
Intelligent Key.
4. All doors will be locked.
5. Operate the door handles to confirm that the
doors have been securely locked.
CAUTION:
After locking the doors using the Intelligent Key,
be sure that the do ors have been securely
locked by operating the door handles.
Unlocking doors
GUID-FC5ACDE1-2F31-4C63-9746-BCF1A534980C
1. Push the “UNLOCK” button
*
2
on the
Intelligent Key.
2. All doors (including the back door ) will be
unlocked.
All doors will be locked automatically unless one of the
following operations is performed within 30 seconds
after pushing the “UNLOCK”
button on the
Intelligent Key while the doors are locked. If during this
30-second time period, the “UNLOCK”
button on
the Intelligent Key is pushed, all doors will be locked
automatically after another 30 seconds.
. Opening any door or back door.
. Pushing the ignition switch.
Selecting door unlock mode (if equipped):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When you first receive the vehicle, the door unlock
mode is set to unlock all the doors with one push of the
“UNLOCK”
button
*
2
. The door unlock mode
can be switched to the selective door unlock mode,
which unlocks the passenger’s doors at the second
push of the “UNLOCK”
button
*
2
Selective door unlock mode:
1. Push the “UNLOCK”
button
*
2
on the
Intelligent Key.
2. The driver’s door unlocks.
3. Push the “UNLOCK”
button
*
2
on the
Intelligent Key again.
4. All doors will be unlocked.
To switch to the selective door unlock mode, perform
the following procedure.
Push the “LOCK”
and “UNLOCK” buttons
simultaneously for more than 5 seconds. Perform the
same procedure to deac tivate the selective door
unlock mode.
. When the selective door unlock mode is set, the
hazard indicator flashes 3 times.
. When the all door unlock mode is set, the hazard
indicator flashes once.

Related Topics

Popular Owner Manuals