1. Pull up the adjusting lever
*
2
.
2. Tilt the seatback to the desired position.
3. Release the adjusting lever to lock the seatback in
position.
The reclining feature allows the adjustment of the
seatback for occupants of different sizes to help obtain
the proper seat belt fit. (See “Seat belts” (P.1-7).)
The seatback may be reclined to allow occupants to
rest when the vehicle is parked.
Seat lifter (if equipped):
SIC2770
The seats can be warmed by built-in heaters. The
switches located on the cen ter console can be
operated independently of each other.
1. Start the engine.
2. Select heat range.
.
For high heat, push the HI (High) side of the
switch
*
1
.
.
For low heat, push the LO (Low) side of the
switch
*
2
.
.
The indicator light
*
3
will illuminate when low
or high is selected.
3. To turn off the heater, return the switch to the level
position. Make sure the indicator light turns off.
The heater is controlled by a thermostat, automatically
turning the heater on and off. The indicator light will
remain on as long as the switch is on.
When the vehicle’s interior is warmed, or before you
leave the vehicle, be sure to turn off the switch.
CAUTION:
. The battery could run down if the seat heater
is operated while the engine is not running.
. Do not use the seat heater for extended
periods or when no one is using the seat.
. Do not put anything on the seat which
insulates heat, such as a blanket, cushion,
seat cover, etc. Otherwise, the seat may
become overheated.
. Do not place anything hard or heavy on the
seat or pierce it with a pin or similar object.
This may result in damage to the seat heater.
. Any liquid spilled on the heated seat should
be removed immediately with a dry cloth.
. When cleaning the seat, never use gasoline,
thinner, or any similar materials.
. If any malfunctions are found or the heated
seat does not operate, turn the switch off
and have the system checked by a NISSAN
dealer.
Safety — seats, seat belts and supplemental restraint system 1-3