2. Open the glove box and insert the key into the
front passenger air bag switch. For Intelligent Key
equipped models, see “Keys” (P.3-2).
3. Push and turn the key to the “OFF” position.
4. Place the ignition switch in the “ON” position. The
front passenger air bag status light will illuminate
and remain on.
To turn on the front passenger air bag:
1. Place the ignition switch in the “OFF” position.
2. Open the glove box and insert the key into the
front passenger air bag switch.
3. Push and turn the key to the “ON” position.
4. Place the ignition switch in the “ON” position. The
front passenger air bag status light will illuminate
then turn off.
Supplemental side-impact air bag system (if
equipped)
SSS0978
The supplemental side-impact air bag is located at the
outside of the front seats’ seatbacks.
The supplemental side-impact air bag system is
designed to inflate in higher severity side collisions,
although it may inflate if the forces in another type of
collision are similar to those of a higher severity side
impact. It may not inflate in certain side collisions.
Vehicle damage (or lack of it) is not always an
indication of proper supplemental side-impact air bag
system operation.
Supplemental curtain side-impact air bag
system (if equipped)
The supplemental curtain side-impact air bag is
located at the roof rails.
The supplemental curtain side-impact air bag system is
designed to inflate in higher severity side collisions,
although it may inflate if the forces in another type of
collision are similar to those of a higher severity side
impact. It may not inflate in certain side collisions.
Vehicle damage (or lack of it) is not always an
indication of proper supplemental curtain side-impact
air bag system operation.
PRE-TENSIONER SEAT BELT SYSTEM (if
equipped)
WARNING:
. The pre-tensioner seat belt cannot be re-
used after activation. It must be replaced
together with the retractor and buckle as a
unit.
. If the vehicle becomes involved in a collision
but the pre-tensioner is not activated, be
sure to have the pre-tensioner system
checked and, if necessary, replaced by a
NISSAN dealer.
. No unauthorized changes should be made
to any components or wiring of the pre-
tensioner seat belt system. This is to prevent
accidental activation of the pre-tensioner
seat belt or damage to the pre-tensioner
seat belt system.
. Work around or on the pre-tensioner seat
belt system should be done by a NISSAN
dealer. The SRS wiring should not be
modified or disconnec ted. Unauthori zed
electrical test equipment and probing de-
vices shoul d not be used on the pre-
tensioner seat belt system.
. If you need to dispose of the pre-tensioner
seat belt system, or scrap the vehicle,
contact a NISSAN dealer. Correct pre-ten-
sioner disposal procedures are set forth in
the appropriate NISSAN Service Ma nual.
Incorrect disposal procedures could cause
personal injury.
The pre-tensioner seat belt system may activate with
the supplemental air bag system in certain types of
collisions.
Working with the seat belt retractor, it helps tighten the
seat belt when the vehicle becomes involved in certain
types of collisions, helping to restrain front seat
occupants.
The pre-tensioner is encased with the front seat belt’s
retractor and anchor. These seat belts are used the
same as conventional seat belts.
When the pre-tensioner seat belt activates, a fairly loud
noise may be heard, followed by the release of smoke.
This smoke is not harmful and does not indicate a fire.
Care should be taken not to inhale it, as it may cause
irritation and choking. Those with a history of a
breathing condition should get fresh air promptly.
Safety — seats, seat belts and supplemental restraint system 1-31