2010-2016 Nissan Micra 4 Door Maintenance and do-it-yourself -> Exterior and interior lights User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance and do-it-yourself -> Exterior and interior lights for Your Nissan Micra 4 Door Fourth Generation (2010-2016)

FOG LIGHTS (if so equipped)
Replacing the fog light bulb
If replacement is required, see your NISSAN
dealer.
CAUTION
● High pressure halogen gas is sealed
inside the halogen bulb. The bulb may
break if the glass envelope is scratched
or the bulb is dropped.
● When handling the bulb, do not touch
the glass envelope.
● Use the same number and wattage as
originally installed as shown in the
chart.
● Do not leave the bulb out of the fog light
for a long period of time as dust, mois-
ture and smoke may enter the fog light
body and affect the performance of the
fog light.
EXTERIOR AND INTERIOR LIGHTS
Item Wattage (W) Bulb No.*
Headlight assembly*
High/low (Halogen)/Daytime running light 60/55 H4
Turn 28 3457NAK
Park light 5 W5W
Side marker light 5 W5W
Fog light (if so equipped) 55 H11
Interior light 5 W5W
Cargo light 5 —
High-mounted stop light type A (if so equipped) 16 W16W
High-mounted stop light type B (if so equipped)* — —
Rear combination light*
Turn signal light 21 WY21W
Stop/Tail 21/5 W21/5W
Backup (reversing) 21 W16W
License plate light* 5 W5W
Always check with the Parts Department at a NISSAN dealer for the latest parts information.
* If replacement is required contact a NISSAN dealer.
Maintenance and do-it-yourself 8-29
1. Interior light
2. Side marker light
3. Park light
4. High/low headlight/Daytime running
light
5. Turn light
6. Front fog light (if so equipped)
7. Stop/tail light
8. High-mounted stop light
9. License plate light
10. Reverse light
11. Rear turn signal light
LTI2081
8-30 Maintenance and do-it-yourself
Replacement procedures
All other lights are either type A, B, C or D. When
replacing a bulb, first remove the lens, lamp
and/or cover.
Indicates bulb removal
Indicates bulb installation
Use a cloth to protect the housing.
SDI1805
Interior light
LDI2044
Maintenance and do-it-yourself 8-31
To replace the bulbs in the rear combination light:
䊊
1
Remove the rear combination light mounting
bolts.
䊊
2
Carefully remove the gasket protector.
䊊
3
Pull rear combination light toward the rear of
the vehicle and disconnect the rear combi-
nation light connector to remove the assem-
bly.
Remove bulbs by turning counterclockwise and
replace with new bulbs.
To replace the high-mounted stop light bulb
1. Disconnect the negative (-) battery cable.
Rear combination light
LDI2374
High-mounted stop light (Type A)
(if so equipped):
LDI2071
8-32 Maintenance and do-it-yourself
2. Remove the lens cover of the high-mounted
stop light by inserting an appropriate re-
mover tool between the top of the lens cover
(the side not touching the glass of the rear
door) and the vehicle
䊊
A
. Pull toward you.
3. After the cover is removed, disconnect the
harness connector and remove the high-
mounted stop light bulb
䊊
B
by rotating it
counterclockwise.
4. Replace with new bulb and reinstall cover.
To replace the luggage compartment light bulb:
1. Remove the light
䊊
A
with a suitable tool.
2. Remove the cover
䊊
B
.
3. Replace the bulb.
License plate light
JVC0014X
Luggage compartment light
JVM0007X
Maintenance and do-it-yourself 8-33

Related Topics

Popular Owner Manuals