Get Maintenance and do-it-yourself -> Jump starting Guide for Nissan Micra 4 Door Fourth Generation (2010-2016)

Vehicles operated in high temperatures or under

severe conditions require frequent checks of the

battery fluid level.

JUMP STARTING

If jump starting is necessary, refer to “Jump start-

ing” in the “In case of emergency” section of this

manual for additional information. If the engine

does not start by jump starting, the battery may

have to be replaced. Contact a NISSAN dealer.

1. Water pump pulley

2. Generator pulley

3. Crankshaft pulley

4. Air conditioner compressor (if so

equipped) /Idler pulley (if so equipped)

5. Manual tensioner pulley

䉱 Tension checking point

WARNING

Be sure the ignition switch is placed in the

OFF or LOCK position before servicing

drive belt. The engine could rotate

unexpectedly.

1. Visually inspect the belt for signs of unusual

wear, cuts, or fraying. If the belt is in poor

condition, have it replaced or adjusted by a

NISSAN dealer.

2. Have the belt checked regularly for condi-

tion.

HR16DE engine

WDI0695

DRIVE BELT

Maintenance and do-it-yourself 8-15

Maintenance and do-it-yourself -> Jump starting for Your Nissan Micra 4 Door Fourth Generation (2010-2016)