Get Heater, air conditioner, audio and phone systems -> Heater and air conditioner (manual) (if so equipped) Guide for Nissan Micra 4 Door Fifth Generation (2017-2023)

HEATER AND AIR CONDITIONER

(manual) (if so equipped)

NOTE:

WARNING

∙ The air conditioner cooling function

operates only when the engine is

running.

∙

Odors from inside and outside the ve-

hicle can build up in the air condi-

tioner unit. Odor can enter the pas-

senger compartment through the

vents.

∙ Do not leave children or adults who

would normally require the assis-

tance of others alone in your vehicle.

Pets should also not be left alone.

They could accidentally injure them-

selves or others through inadvertent

operation of the vehicle. Also, on hot,

sunny days, temperatures in a closed

vehicle could quickly become high

enough to cause severe or possibly

fatal injuries to people or animals.

∙

When parking, set the heater and air

conditioner controls to turn off air re-

circulation to allow fresh air into the

passenger compartment. This should

help reduce odors inside the vehicle.

∙ Do not use the recirculation mode for

long periods as it may cause the inte-

rior air to become stale and the win-

dows to fog up.

4-20 Heater, air conditioner, audio and phone systems

—

Air flows from defroster and

foot outlets.

Air flows mainly from defroster

outlets.

NOTE:

USE WITH icon indicates (as a visual

aid) the correct position of intake lever

for correct defogging.

Temperature control dial

The temperature control dial allows you to

adjust the temperature of the outlet air. To

lower the temperature, turn the dial to the

left. To increase the temperature, turn the

dial to the right.

LHA4636

Fan speed control dial

CONTROLS

The

fan speed control dial turns the

fan on and off and controls fan speed.

1.

Rear window and outside mirror

(if so equipped) defroster switch

Fresh air

Air flow control dial

2.

Fan speed control dial

Move the air intake lever to the

posi-

The air flow control dial allows you to select

the air flow outlets.

tion. The air flow is drawn from outside the

vehicle.

3. A/C (air conditioner) button

4. Temperature control dial

—

Air flows from center and side

vents.

Air flows from center, side

vents and foot outlets.

Air flows mainly from foot

outlets.

Air recirculation

Move the air intake lever to the

5. Air intake lever (Air recirculation and

Fresh air)

posi-

tion to recirculate air inside the vehicle.

Use the selection:

when driving on a dusty road.

6. Air flow control dial

∙

Heater, air conditioner, audio and phone systems 4-21

∙

to prevent traffic fumes from entering

passenger compartment.

1. Move the air intake lever to the

position for normal heating.

1. Move the air intake lever to the

position.

for maximum cooling when using the

air conditioner.

2. Turn the air flow control dial to

the

position.

the

position.

A/C (air conditioner) button

3. Turn the

fan control dial to the

3. Turn the

fan control dial to the

desired position.

Start the engine, turn the

fan control

dial to the desired position and press

4. Turn the temperature control dial to

the desired position between the

middle and the hot position.

4. Turn the temperature control dial to

the desired position between the

middle and the hot position.

the

button to turn on the air condi-

tioner. The indicator light comes on when

the air conditioner is operating. To turn off

∙

To quickly remove ice or fog from the

windows, turn the fan control dial to the

maximum position and the tempera-

ture control dial to the full hot position.

Ventilation

the air conditioner, press the

again.

The air conditioner cooling function op-

erates only when the engine is running.

button

This mode directs outside air to the side

and center vents.

1. Move the air intake lever to the

position.

When the

lected, press the

the air conditioner for better performance.

This will dehumidify the air and help defog

the windows.

or

position is se-

button to turn on

Rear window and outside mirror

(if so equipped) defroster switch

For additional information, refer to “Rear

window and outside mirror (if so equipped)

defroster switch” in the “Instruments and

controls” section of this manual.

2. Turn the air flow control dial to

the

position.

3. Turn the

fan control dial to the

Bi-level heating

desired position.

This mode directs cooler air from the side

and center vents and warmer air from the

floor outlets. When the temperature con-

trol dial is moved to the full hot or full cool

position, the air between the vents and the

floor outlets is the same temperature.

4. Turn the temperature control dial to

the desired position.

HEATER OPERATION

Heating

This mode is used to direct heated air to

the foot outlets. Some air also flows from

the defrost outlets.

Defrosting or defogging

This mode directs the air to the defrost

outlets to defrost/defog the windows.

4-22 Heater, air conditioner, audio and phone systems

5. Turn the temperature control dial to

the desired position.

Operating tips

Clear snow and ice from the wiper blades

and air inlet in front of the windshield.

This improves heater operation.

1. Move the air intake lever to the

position.

∙

For quick cooling when the outside

temperature is high, move the air intake

2. Turn the air flow control dial to

the

position.

lever to the

return to the

cooling.

position. Be sure to

position for normal

AIR CONDITIONER OPERATION

3. Turn the

fan control dial to the

desired position.

Start the engine, turn the

dial to the desired position, and press

the button to activate the air condi-

tioner. When the air conditioner is on, cool-

ing and dehumidifying functions are

added to the heater operation.

fan control

4. Turn the temperature control dial to

the desired position.

Dehumidified heating

This mode is used to heat and dehumidify

the air.

Heating and defogging

This mode heats the cabin and defogs the

windshield.

1. Move the air intake lever to the

position.

The air conditioner cooling function op-

erates only when the engine is running.

2. Turn the air flow control dial to

1. Move the air intake lever to the

position.

the

position.

Cooling

2. Turn the air flow control dial to

3. Turn the

fan control dial to the

This mode is used to cool and dehumidify

the air.

the

position.

desired position.

3. Turn the

fan control dial to the

4. Press the

button. The indicator

1. Move the air intake lever to the

position.

desired position.

light comes on.

4. Turn the temperature control dial to

the desired position between the

middle and the hot position.

5. Turn the temperature control dial to

the desired position.

2. Turn the air flow control dial to

the

position.

Dehumidified defogging

When the

lected, press the

the air conditioner for better performance.

This will dehumidify the air and help defog

the windows.

or

position is se-

button to turn on

3. Turn the

fan control dial to the

This mode is used to defog the windows

and dehumidify the air.

desired position.

4. Press the

button. The indicator

1. Move the air intake lever to the

position.

light comes on.

Heater, air conditioner, audio and phone systems 4-23

2. Turn the air flow control dial to

∙

If the engine coolant temperature

gauge indicates engine coolant tem-

perature over the normal range, turn

the air conditioner off. For additional

information, refer to “If your vehicle

overheats” in the “In case of emer-

gency” section of this manual.

the

position.

3. Turn the

fan control dial to the de-

sired position.

4. Turn the temperature control dial to

the desired position.

AIR FLOW CHARTS

Operating tips

The following charts show the button and

dial positions for MAXIMUM AND QUICK

heating, cooling or defrosting. The air in-

∙

Keep the windows closed while the air

conditioner is in operation.

take lever should always be in the

position for heating and defrosting.

∙

After parking in the sun, drive for 2 or

3 minutes with the windows open to

vent hot air from the passenger com-

partment. Then, close the windows.

This allows the air conditioner to cool

the interior more quickly.

∙

The air conditioning system should

be operated for approximately

10 minutes at least once a month.

This helps prevent damage to the

system due to lack of lubrication.

A visible mist may be seen coming from

the ventilators in hot, humid conditions

as the air is cooled rapidly. This does not

indicate a malfunction.

4-24 Heater, air conditioner, audio and phone systems

LHA4666

LHA4667

Heater, air conditioner, audio and phone systems 4-25

LHA4668

LHA4669

4-26 Heater, air conditioner, audio and phone systems

LHA4670

Heater, air conditioner, audio and phone systems 4-27

Heater, air conditioner, audio and phone systems -> Heater and air conditioner (manual) (if so equipped) for Your Nissan Micra 4 Door Fifth Generation (2017-2023)

Related Topics

Popular Owner Manuals

Latest Owner Manuals