Get Heater, air conditioner, audio and phone systems -> Heater (manual) (if so equipped) Guide for Nissan Micra 4 Door Fifth Generation (2017-2023)

HEATER (manual) (if so equipped)

WARNING

∙ The air conditioner cooling function

operates only when the engine is

running.

NOTE:

∙

Odors from inside and outside the ve-

hicle can build up in the air condi-

tioner unit. Odor can enter the pas-

senger compartment through the

vents.

∙ Do not leave children or adults who

would normally require the assis-

tance of others alone in your vehicle.

Pets should also not be left alone.

They could accidentally injure them-

selves or others through inadvertent

operation of the vehicle. Also, on hot,

sunny days, temperatures in a closed

vehicle could quickly become high

enough to cause severe or possibly

fatal injuries to people or animals.

∙

When parking, set the heater and air

conditioner (if so equipped) controls

to turn off air recirculation to allow

fresh air into the passenger compart-

ment. This should help reduce odors

inside the vehicle.

∙ Do not use the recirculation mode for

long periods as it may cause the inte-

rior air to become stale and the win-

dows to fog up.

4-14 Heater, air conditioner, audio and phone systems

NOTE:

USE WITH icon indicates (as a visual

aid) the correct position of intake lever

for correct defogging.

Temperature control dial

The temperature control dial allows you to

adjust the temperature of the outlet air. To

lower the temperature, turn the dial to the

left. To increase the temperature, turn the

dial to the right.

Fresh air

LHA4635

Move the air intake lever to the

tion. The air flow is drawn from outside the

vehicle.

posi-

1.

Air flow control dial

Rear window defroster switch

2.

3.

The air flow control dial allows you to select

the air flow outlets.

Fan speed control dial

Temperature control dial

Air recirculation

4. Air intake lever (air recirculation

and fresh air)

— Air flows from center and side

vents.

Move the air intake lever to the

posi-

tion to recirculate air inside the vehicle.

Use the selection:

5.

Air flow control dial

— Air flows from center, side vents

and foot outlets.

CONTROLS

Fan speed control dial

— Air flows mainly from foot

outlets.

∙

when driving on a dusty road.

to prevent traffic fumes from entering

passenger compartment.

The

fan speed control dial turns the

— Air flows from defroster and

foot outlets.

fan on and off, and controls fan speed.

∙

for maximum cooling when using the

air conditioner.

— Air flows mainly from defroster

outlets.

Heater, air conditioner, audio and phone systems 4-15

2. Turn the air flow control dial to

Rear window defroster switch

Bi-level heating

the

position.

For additional information about the rear

window defroster switch, refer to “Rear win-

dow and outside mirror (if so equipped)

defroster switch” in the “Instruments and

controls” section of this manual.

This mode directs cooler air from the side

and center vents and warmer air from the

floor outlets. When the temperature con-

trol dial is moved to the full hot or full cool

position, the air between the vents and the

floor outlets is the same temperature.

3. Turn the

fan control dial to the

desired position.

4. Turn the temperature control dial to

the desired position.

HEATER OPERATION

Heating

This mode is used to direct heated air to

the foot outlets. Some air also flows from

the defrost outlets.

Defrosting or defogging

1. Move the air intake lever to the

position.

This mode directs the air to the defrost

outlets to defrost/defog the windows.

2. Turn the air flow control dial to

1. Move the air intake lever to the

position.

the

position.

3. Turn the

fan control dial to the

1. Move the air intake lever to the

position for normal heating.

2. Turn the air flow control dial to

desired position.

the

position.

2. Turn the air flow control dial to

4. Turn the temperature control dial to

the desired position.

3. Turn the

fan control dial to the

the

position.

desired position.

Heating and defogging

3. Turn the

fan control dial to the

4. Turn the temperature control dial to

the desired position between the

middle and the hot position.

desired position.

This mode heats the cabin and defogs the

windshield.

4. Turn the temperature control dial to

the desired position between the

middle and the hot position.

5. Align left and right vents to direct air

flow toward the front side windows.

1. Move the air intake lever to the

position.

Ventilation

∙

To quickly remove ice or fog from the

windows, turn the fan control dial to the

maximum position and the tempera-

ture control dial to the full hot position.

2. Turn the air flow control dial to

This mode directs outside air to the side

and center vents.

the

position.

3. Turn the

fan control dial to the

1. Move the air intake lever to the

position.

desired position.

4-16 Heater, air conditioner, audio and phone systems

4. Turn the temperature control dial to

the desired position between the

middle and the hot position.

Operating tips

Clear snow and ice from the wiper blades

and air inlet in front of the windshield.

This improves heater operation.

AIR FLOW CHARTS

The following charts show the button and

dial positions for MAXIMUM AND QUICK

heating or defrosting. The air intake lever

should always be in the

heating and defrosting.

position for

LHA4662

Heater, air conditioner, audio and phone systems 4-17

LHA4663

LHA4664

4-18 Heater, air conditioner, audio and phone systems

LHA4665

Heater, air conditioner, audio and phone systems 4-19

Heater, air conditioner, audio and phone systems -> Heater (manual) (if so equipped) for Your Nissan Micra 4 Door Fifth Generation (2017-2023)

Related Topics

Popular Owner Manuals

Latest Owner Manuals