Get Instruments and controls -> Horn Guide for Nissan Patrol SUV Sixth Generation (2010-2023)

WINDSHIELD DEICER SWITCH (if equipped)

HORN

tion switch is in the “ON” position.

The defogger is used to reduce the moisture,

fog or frost on the rear window surface to

improve the rear views and on the outside

rearview mirror surface to improve the side

views (if equipped).

When the defogger switch

is pushed, the

indicator light illuminates and the defogger

operates for approximately 15 minutes. After

the preset time has passed, the defogger will

turn off automatically. To turn off the defogger

manually, push the defogger switch again, and

the indicator light turns off.

SIC4385

SIC4387

The windshield deicer switch (defogger switch)

operates when the ignition switch is in the “ON”

position.

The horn switch operates regardless of the

ignition switch position except when the bat-

tery is discharged.

CAUTION:

The deicer is used to remove ice from the

When the horn switch is pushed and held, the

horn will sound. Releasing the horn switch will

cease the horn sound.

When operating the defogger continu-

ously, be sure to start the engine. Other-

wise, it may cause the battery to

discharge.

When cleaning the inner side of the

window, be careful not to scratch or

damage the electrical conductors on the

surface of the window.

windshield when

wiper is frozen to the

windshield.

When the switch

is pushed, the indicator

light

illuminates and the deicer operates for

approximately 15 minutes. The rear window

defogger will activate at the same time. After

the preset time has passed, the deicer will turn

off automatically. To turn off the deicer manu-

ally, push the deicer switch again, and the

indicator light turns off.

CAUTION:

When operating the deicer continuously,

be sure to start the engine. Otherwise, it

may cause the battery to discharge.

When cleaning the inner side of the

window, be careful not to scratch or

damage the electrical conductors on the

surface of the window.

Instruments and controls 2-53

HEATED STEERING WHEEL (if equipped)

WINDOWS

in serious accidents.

POWER WINDOWS

To help avoid risk of injury or death

through unintended operation of the

vehicle and or its systems, including

entrapment in windows or inadvertent

door lock activation, do not leave chil-

dren, people who require the assistance

of others or pets unattended in your

vehicle. Additionally, the temperature in-

side a closed vehicle on a warm day can

quickly become high enough to cause a

significant risk of injury or death to

people and pets.

WARNING:

The driver is always responsible for all the

power window operation including passen-

ger’s operation. Be sure to observe the

following warnings for safety.

Never allow anyone to extend any portion

of their body or objects out of the open-

ing while the vehicle is in motion. Other-

wise they may be seriously damaged by

coming into contact with objects outside

the vehicle or when abruptly braking.

Make sure that all passengers have their

hands, etc. inside the vehicle before

operating the power windows. Do not

intentionally activate the auto-reverse

function. If their hands or faces are

caught in the windows, it could cause

serious injury.

Never allow children to operate the

power window. Improper operation by

children could lead to an accident. De-

press the window lock button since

children or other persons could be

caught in the power window and this

may cause serious damage.

When operating the power windows, let

children know it and make sure that their

hands, arms, etc. are not placed near the

power windows. Otherwise they may be

caught in the power windows.

SIC4401

The heated steering wheel system is designed

to operate only when the surface temperature

of the steering wheel is below 20°C (68°F).

The power windows operate when the ignition

switch is in the “ON” position.

Push the heated steering wheel switch to

Driver’s window switch

warm the steering wheel after the engine

starts. The indicator light

illuminate.

on the switch will

If the surface temperature of the steering

wheel is below 20°C (68°F), the system will heat

the steering wheel and cycle off and on to

maintain a temperature above 20°C (68°F). The

indicator light will remain on as long as the

system is on.

Push the switch again to turn the heated

steering wheel system off manually. The in-

dicator light turns off.

SIC4463

NOTE:

Driver side window

If the surface temperature of the steering

wheel is above 20°C (68°F) when the switch is

turned on, the system will not heat the

steering wheel. This is not a malfunction.

Front passenger side window

Rear left passenger side window

Rear right passenger side window

Window lock button

Make sure that the ignition switch is in

the “OFF” position and do not leave the

Intelligent Key and children unattended

inside the vehicle. They could unknow-

ingly activate switches or controls. Un-

attended children could become involved

The driver’s switch, the main switch, can

control all windows.

To open

a window, push down the power

window switch.

2-54 Instruments and controls

To close a window, pull up the power window

switch.

Auto-reverse function:

WARNING:

Automatic function

Locking passenger’s windows:

When the lock button

is pushed in, the

There is a small distance just before the

passenger’s windows cannot be operated.

closed position which cannot be detected.

Make sure that all passengers have their

hands, etc. inside the vehicle before closing

the windows.

To cancel the passenger’s windows lock, push

the lock button

again.

Passenger’s window switch

The auto-reverse function enables a window to

automatically reverse when something is

caught in the window as it is closing by the

automatic function. When the control unit

detects an obstacle, the window will be low-

ered immediately.

Depending on the environment or driving

conditions, the auto-reverse function may

activate if an impact or load similar to some-

thing being caught in the window occurs.

SIC4464

The automatic function is available for the

switch that has an mark on its surface.

The automatic function enables a window to

fully open or close without holding the switch

down or up.

To fully open the window, push the power

window switch down to the second detent and

release the switch. To fully close the window,

pull the power window switch up to the second

detent and release the switch. The switch does

not have to be held during window operation.

To stop the window open/close operation

during the automatic function, push down or

pull up the switch in opposite directions.

Operating windows with Intelligent Key

(if equipped)

SIC4353

The windows can be opened or closed (if

equipped) by pushing the “LOCK” or “UNLOCK”

button on the Intelligent Key. This function will

not operate while the window timer is acti-

vated or when the windows need to be

initialized. For details about the Intelligent Key

button usage, see “Using remote keyless entry

system” (P.3-13).

The passenger’s switch can control its corre-

sponding window.

If the passengers’ windows lock button on the

driver’s side switch is pushed in, the passen-

ger’s switch cannot be operated.

Window timer:

The window timer allows the window switch to

be operated for approximately 45 seconds

even if the ignition switch is pushed to the

“OFF” position. The window timer will be

canceled when the driver’s or front passenger’s

door is opened or the preset time has expired.

Opening:

To open the windows, push the “UNLOCK”

button on the Intelligent Key for about

seconds after the door is unlocked.

To stop opening, release the “UNLOCK”

button.

If the window open operation is stopped part-

way while pushing the “UNLOCK”

button,

release and push the button again until the

Instruments and controls 2-55

SUNROOF (if equipped)

windows open completely.

Sunshade

WARNING:

To open or close the sunshade, slide the

Closing (if equipped):

In an accident you could be thrown from

the vehicle through an open sunroof.

Adults should always use seat belts and

children should always use seat belts or

child restraint systems.

Never allow anyone to stand up or extend

any portion of their body out of the

opening while the vehicle is in motion or

while the sunroof is closing.

sunshade manually.

To close the windows, push the door “LOCK”

button on the Intelligent Key for about 3

seconds after the door is locked.

The sunshade will open automatically when

the sunroof is opened. The sunshade needs to

be closed manually by sliding it.

To stop closing, release the “LOCK”

button.

If the window close operation is stopped part-

Sunroof

Tilting:

way while pushing the “LOCK”

button,

release and push the button again until the

windows close completely.

To tilt up, first close the sunroof, then push the

side of the sunroof switch and

If the windows do not close automatically

release it; it need not be held. To tilt down the

CAUTION:

sunroof, push the DOWN

side.

If the power window automatic function (clos-

ing only) does not operate properly, perform

the following procedure to initialize the power

window system.

Remove water drops, snow, ice or sand

from the sunroof before opening.

Sliding:

To fully open or close the sunroof, push the

Do not place any heavy objects on the

OPEN

or CLOSE

side of the

1. Push the ignition switch to start the engine.

2. Close the door.

3. After starting the engine, open the window

completely by operating the power window

switch.

4. Pull the power window switch and hold it to

close the window, and then hold the switch

more than 3 seconds after the window is

closed completely.

5. Release the power window switch. Operate

the window by the automatic function to

confirm the initialization is complete.

sunroof or surrounding area.

sunroof switch and release it; it need not be

held. The roof will automatically open or close

all the way. To stop the roof, push the switch

once more while it is opening or closing.

AUTOMATIC SUNROOF (Type A)

Auto-reverse function

WARNING:

There is

a small distance just before the

closed position which cannot be detected.

Make sure that all passengers have their

hands, etc. inside the vehicle before closing

the sunroof.

6. Perform steps 2 through 5 above for other

windows.

The auto-reverse function enables the sunroof

to automatically reverse when something is

caught in the sunroof as it is closing. When the

control unit detects an obstacle, the sunroof

will open immediately.

If the sunroof cannot be closed automatically

when the auto reverse function activates due

to a malfunction, push and hold the CLOSE

SIC3510

If the power window automatic function does

not operate properly after performing the

procedure above, have your vehicle checked

by a NISSAN dealer.

The sunroof operates when the ignition switch

is in the “ON” position.

2-56 Instruments and controls

Instruments and controls -> Horn for Your Nissan Patrol SUV Sixth Generation (2010-2023)

Related Topics

Instruments and controls