DYNAMIC DRIVER ASSISTANCE SWITCH
(models without ProPILOT assist)
The heater is controlled by a thermo-
stat, automatically turning the heater
on and off. The indicator light will
remain on as long as the switch is on.
When the vehicle’s interior is warmed,
or before you leave the vehicle, be
sure to turn off the switch.
JVI1593X
JVR0322X
The dynamic driver assistance switch is
used to temporarily turn on and off the
Intelligent Lane Intervention (I-LI) system.
The I-LI system must be turned on with
the dynamic driver assistance switch
every time the ignition is placed in the
ON position.
The seats are warmed by built-in heaters.
The switches located on the center con-
sole can be operated independently of
each other.
1. Start the engine.
2. Select heat range.
For high-speed heating, push the HI
When the dynamic driver assistance
(High) side of the switch.
switch is turned off, the indicator
on
For low-speed heating, push the LO
(Low) side of the switch.
the switch is off. The indicator will also be
off if the I-LI system is deactivated using
the vehicle information display.
The indicator light on the switch will
illuminate when the heater is on.
The I-LI system warns the driver with an
indicator and a chime, and helps assist
the driver to return the vehicle to the
center of the traveling lane by applying
3. To turn off the heater, return the
switch to the level position. Make sure
the indicator light goes off.
Instruments and controls 2-61
CarManuals2.com
English 
