Get Instruments and controls -> Security systems Guide for Nissan Qashqai SUV Third Generation (2021-2026)

SECURITY SYSTEMS

System temporarily unavailable

Maintenance

If the vehicle is parked in direct sunlight

under high temperature conditions (over

approximately 40°C (104°F)) and then

started, the TSR system may be deacti-

vated automatically. The “Unavailable:

high cabin temperature” warning mes-

sage will appear in the vehicle informa-

tion display.

The TSR uses the same multi-sensing

front camera unit that is used by the

Lane Departure Warning (LDW) system,

located in front of the interior rearview

mirror. For maintenance of the camera,

see “System maintenance” (P.5-39).

Action to take:

When the interior temperature is reduced,

the TSR system will resume operating

automatically.

JVI1587X

System Malfunction

Your vehicle has two types of security

systems, as follows:

If the TSR system malfunctions it will be

turned off automatically and the TSR

"Malfunction" warning message will ap-

pear in the vehicle information display.

Vehicle security system

NISSAN Vehicle Immobilizer System

The security condition will be shown by

Action to take:

the security indicator light.

VEHICLE SECURITY SYSTEM

If the TSR "Malfunction" warning mes-

sage appears, pull off the road at a safe

location and stop the vehicle. Turn the

engine off and restart the engine. If the

TSR "Malfunction" message continues to

appear, have the system checked by a

NISSAN dealer.

The vehicle security system provides

visual and audio alarm signals if someone

opens the doors, hood (if so equipped)

and liftgate when the system is armed. It

is not, however, a motion detection type

system that activates when a vehicle is

moved or when a vibration occurs.

The system helps deter vehicle theft but

Instruments and controls 2-45

CarManuals2.com

cannot prevent it, nor can it prevent the

theft of interior or exterior vehicle com-

ponents in all situations. Always secure

your vehicle even if parking for a brief

period. Never leave your keys in the

vehicle, and always lock it when unat-

tended. Be aware of your surroundings,

and park in secure, well-lit areas when-

ever possible.

Many devices offering additional protec-

tion, such as component locks, identifica-

tion markers, and tracking systems, are

available at auto supply stores and speci-

alty shops. Your NISSAN dealer may also

offer such equipment. Check with your

insurance company to see if you may be

eligible for discounts for various theft

protection features.

tem will automatically shift into the

armed phase. The security light begins

to flash once every three seconds. If

during the pre-armed phase one of

the following occurs, the system will

not arm:

Any door is unlocked with the key

fob (if so equipped), the Intelligent

Key (if so equipped), or the request

switch (if so equipped).

Ignition switch is placed in the ON

position.

Even when the driver and/or passen-

gers are in the vehicle, the system will

activate with all the doors, hood (if so

equipped) and liftgate locked with the

ignition switch placed in the LOCK posi-

tion. When placing the ignition switch in

the ON position, the system will be

released.

SIC2045

How to arm the vehicle security

system

1. Close all windows. The system can be

armed even if the windows are open.

2. Remove the keys from the vehicle.

Vehicle security system activation

3. Close all doors, hood (if so equipped)

and liftgate. Lock all doors. The doors

can be locked with the key fob (if so

equipped), Intelligent Key (if so

equipped), the request switch (if so

equipped), or power door lock switch.

4. Confirm that the security indicator

light stays on for about 30 seconds.

The vehicle security system is now

pre-armed. The vehicle security sys-

The vehicle security system will give the

following alarm:

The headlights blink and the horn

sounds intermittently.

The alarm automatically turns off

after approximately 50 seconds. How-

ever, the alarm reactivates if the

vehicle is tampered with again.

2-46 Instruments and controls

CarManuals2.com

The alarm is activated by:

FCC Rules. Operation is subject to the

following two conditions: (1) this device

may not cause harmful interference,

and (2) this device must accept any

interference received, including inter-

ference that may cause undesired op-

eration.

NISSAN VEHICLE IMMOBILIZER SYS-

TEM

Opening any doors, the hood (if so

equipped) or liftgate without using the

key fob (if so equipped) or Intelligent

Key (if so equipped) (even if the door is

unlocked by releasing the door inside

lock knob or using the key/mechan-

ical key).

The NISSAN Vehicle Immobilizer System

will not allow the engine to start without

the use of the registered key.

If the engine fails to start using the

registered key, it may be due to inter-

ference caused by another registered key,

an automated toll road device or auto-

mated payment device on the key ring.

Restart the engine using the following

procedures:

NOTE:

Changes or modifications not expressly

approved by the party responsible for

compliance could void the user’s

authority to operate the equipment.

How to stop an activated alarm

The alarm stops only by unlocking a door

or the liftgate by pushing the UNLOCK

button on the key fob (if so equipped)

or the Intelligent Key (if so equipped), or

pushing the request switch (if so

equipped) on the driver’s or passenger’s

door in range of the door handle.

For Canada:

1. Leave the ignition switch in the ON

This device contains licence-exempt

transmitter(s)/receiver(s) that comply

with Innovation, Science and Economic

Development Canada’s licence-exempt

RSS(s). Operation is subject to the fol-

lowing two conditions: (1) This device

may not cause interference. (2) This

device must accept any interference,

including interference that may cause

undesired operation of the device.

position for approximately 5 seconds.

2. Place the ignition switch in the OFF or

LOCK position and wait approximately

10 seconds.

If the Intelligent Key battery is dis-

charged:

3. Repeat step 1 and 2 again.

4. Restart the engine while holding the

device (which may have caused the

interference) separate from the regis-

tered key.

If the Intelligent Key battery is discharged,

the alarm will not stop by pushing the

UNLOCK

button on the Intelligent Key

or pushing the request switch on the

driver’s or passenger’s door in range of

the door handle. In such a case, unlock

the driver’s door using the mechanical

key and touch the ignition switch with the

Intelligent Key to stop the alarm. (See

“Intelligent Key battery discharge” (P.5-

17).)

If this procedure allows the engine to

start, NISSAN recommends placing the

registered key on a separate key ring

to avoid interference from other de-

vices.

FCC Notice:

For USA:

This device complies with Part 15 of the

Instruments and controls 2-47

CarManuals2.com

Instruments and controls -> Security systems for Your Nissan Qashqai SUV Third Generation (2021-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals