2021-2026 Nissan Qashqai SUV Starting and driving -> Ignition switch (models without Intelligent Key system) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and driving -> Ignition switch (models without Intelligent Key system) for Your Nissan Qashqai SUV Third Generation (2021-2026)

IGNITION SWITCH (models without  
Intelligent Key system)  
train damage or unexpected ve-  
hicle movement which could re-  
sult in serious vehicle damage or  
personal injury.  
When a wheel is off the ground  
due to an unlevel surface, do not  
spin the wheel excessively (AWD  
model).  
.
.
Be sure to check the brakes im-  
mediately after driving in mud or  
water. See “Brake system” (P.5-  
129) for wet brakes.  
Avoid parking your vehicle on  
steep hills. If you get out of the  
vehicle and it rolls forward, back-  
ward or sideways, you could be  
injured.  
Whenever you drive off-road  
through sand, mud or water as  
deep as the wheel hub, more  
frequent maintenance may be  
required. See the maintenance  
schedule shown in the “9. Main-  
tenance and schedules” section.  
Spinning the front wheels on  
slippery surfaces may cause the  
AWD warning message to display  
and the AWD system to automa-  
tically switch from the AWD mode  
to the 2WD mode. This could  
reduce traction. (AWD models)  
WARNING  
Never remove the key or place the  
ignition switch in the LOCK position  
while driving. The steering wheel will  
lock and could cause the driver to  
lose control of the vehicle. This could  
result in serious vehicle damage or  
personal injury.  
.
.
.
Accelerating quickly, sharp steer-  
ing maneuvers or sudden braking  
may cause loss of control.  
.
.
If at all possible, avoid sharp  
turning maneuvers, particularly  
at high speeds. Your vehicle has  
a higher center of gravity than a  
conventional passenger car. The  
vehicle is not designed for cor-  
nering at the same speeds as  
conventional passenger cars.  
Failure to operate this vehicle  
correctly could result in loss of  
control and/or a rollover acci-  
dent.  
.
Always use tires of the same type,  
size, brand, construction (bias,  
bias-belted or radial), and tread  
pattern on all four wheels. Install  
traction devices on the front  
wheels when driving on slippery  
roads and drive carefully.  
5-12 Starting and driving  
CarManuals2.com  
2. Turn the ignition switch slightly in the  
ON direction.  
3. Place the ignition switch in the LOCK  
position.  
4. Remove the key.  
If the ignition switch is turned to the  
LOCK position, the shift lever cannot be  
moved from the P (Park) position. The  
shift lever can be moved if the ignition  
switch is in the ON position with the foot  
brake pedal depressed.  
JVS1067X  
JVS1067X  
CONTINUOUSLY VARIABLE TRANS-  
MISSION (CVT)  
MANUAL TRANSMISSION (MT)  
The ignition switch includes a device that  
helps prevent accidental removal of the  
key while driving.  
The ignition lock is designed so that the  
ignition switch cannot be turned to the  
LOCK position until the shift lever is  
moved to the P (Park) position. When  
moving the ignition switch to the LOCK  
position, to remove the key from the  
ignition switch, make sure the shift lever  
is in the P (Park) position.  
The key can only be removed when the  
ignition switch is in the LOCK position.  
When the ignition switch cannot be  
turned to the LOCK position:  
1. Move the shift lever to the P (Park)  
position.  
Starting and driving 5-13  
CarManuals2.com  

Related Topics

Popular Owner Manuals