Get Display screen, heater and air conditioner, and audio system Guide for Nissan X Trail SUV Fourth Generation (2022-2026)

NISSANCONNECT OWNER’S

MANUAL (if equipped)

SAFETY PRECAUTIONS

For models with NissanConnect System, refer

to the NissanConnect Owner’s Manual that

includes the following information.

WARNING:

.

Do not adjust the display controls, heater

and air conditioner controls or audio

controls while driving so that full atten-

tion may be given to vehicle operation.

Available functions may vary depending on the

models, specifications and software versions.

.

Audio

If you noticed any foreign objects enter-

ing the system hardware, spilled liquid on

the system, or noticed smoke or fumes

coming out from the system, or any other

unusual operation is observed, stop using

the system immediately and contact the

nearest NISSAN dealer. Ignoring such

conditions may lead to an accident, fire

or electric shock.

Hands-free phone

Apple CarPlay

Android Auto^TM

Navigation

Voice recognition

Information and settings viewable on Nis-

sanConnect

.

Do not disassemble or modify this sys-

tem. If you do, it may lead to an accident,

fire, or electric shock.

CAUTION:

Do not use the system when the engine is not

running for extended periods of time to

prevent battery discharge.

Display screen, heater and air conditioner, and audio system 4-3

CENTER MULTI-FUNCTION

CONTROL PANEL (for type D audio)

HOW TO USE TOUCH SCREEN DISPLAY

WARNING:

.

The glass display screen may break if it is

hit with a hard or sharp object. If the

glass screen breaks, do not touch it.

Doing so could result in an injury.

To clean the display, never use a rough

cloth, alcohol, benzine, thinner or any

kind of solvent or paper towel with a

chemical cleaning agent. They will

scratch or deteriorate the panel.

.

Do not splash any liquid such as water or

car fragrance on the display. Contact with

liquid will cause the system to malfunc-

tion.

To help ensure safe driving, some functions

cannot be operated while driving.

The on-screen functions that are not available

while driving will be “grayed out” or muted.

Park the vehicle in a safe location and then

operate the navigation system.

CAUTION:

JVH0829X

.

ALWAYS give your full attention to driving.

1.

Display screen (P.4-4)

8.

SETUP button (P.4-6)

Avoid using vehicle features that could

distract you. If distracted, you could lose

control of your vehicle and cause an

accident.

2.

For navigation system control buttons

refer to the separate Navigation System

Owner’s Manual.

3.

4.

5.

INFO button (P.4-5)

Power/VOLUME dial (P.4-67)

Brightness control/display on·off button

(P.4-5)

6.

7.

ENTER/Scroll dial (P.4-5)

BACK button (P.4-5)

4-4 Display screen, heater and air conditioner, and audio system

VEHICLE INFORMATION AND

SETTINGS (for type D audio)

Vehicle information can be checked and var-

ious settings can be adjusted on the display.

.

OK:

Touch screen operation

Completes the character input.

Designs and items displayed on the screen may

vary depending on the models and specifica-

tions.

Touch screen maintenance

To clean the display screen, use a dry, soft

cloth. If additional cleaning is necessary, use a

small amount of neutral detergent with a soft

cloth. Never spray the screen with water or

detergent. Dampen the cloth first and then

wipe the screen.

HOW TO USE INFO BUTTON

Push the INFO button to display the following

information on the display screen.

Available items:

.

My Apps

HOW TO USE BRIGHTNESS CONTROL/

DISPLAY ON·OFF BUTTON

Push the brightness control/display on·off

Traffic Messages (if equipped)

Avoid Road (if equipped)

Eco Score

JVH0881X

“

” button to change the display brightness

Selecting items:

between Auto mode and Night mode. While the

mode is being displayed, the brightness can be

adjusted using the ENTER/Scroll dial.

Voice Commands (if equipped)

Touch an item to select. For example, to select

the “Speed Sensitive Vol.” key, touch the “Speed

Sensitive Vol.” key on the screen. Touch up/

My Apps

Some application services can be used with

this system when linked to your smartphone.

For details, see “NissanConnect App smart-

phone integration” (P.4-71).

Push and hold the brightness control/display

on·off “ ” button to turn the display off. Push

the button again to turn the display on.

down arrow

previous or the next page.

on the screen to display the

Adjusting items:

HOW TO USE ENTER/SCROLL DIAL

Touch the “+” or “-”

of an item.

key to adjust the settings

Traffic Messages (if equipped)

Turn the ENTER/Scroll dial to select items on

the screen and to adjust the levels of setting

items. Push the dial to confirm the selected

item or setting.

Traffic Messages can be displayed on the

display screen when available. Refer to the

separate Navigation System Owner’s Manual

for details.

Entering characters:

Touch the letter or number key on the key-

board screen. Options below are available

when inputting characters.

HOW TO USE BACK BUTTON

Push the BACK button to return to the previous

screen.

Avoid Road (if equipped)

Refer to the separate Navigation System Own-

er’s Manual for details.

.

123/ABC:

Changes the keyboard between numbers

and alphabets.

.

Space:

Inserts a space.

Delete:

Deletes the last entered character with one

touch. Touch and hold the “Delete” key to

delete all of the characters.

Display screen, heater and air conditioner, and audio system 4-5

.

System

AUX Level:

Eco Score

The Eco Score feature analyzes driving beha-

vior and provides an overall score.

— Display

This feature controls the volume level of

incoming sound when an auxiliary device is

connected to the system. Select the level from

“Low (Quiet)”, “Medium”, and “High (Loud)”.

— Clock

— Language

HOW TO USE SETUP BUTTON

— Camera Settings (if equipped)

— Temperature Unit

— Touch Click

Navigation settings

Navigation settings can be changed. See Navi-

gation System Owner’s Manual for details.

— Beep Tones

— Factory Settings

— Software Licenses (if equipped)

— System Software Version

Phone & Bluetooth/Telephone & Bluetooth

Radio (if equipped)

Traffic Messages settings (if equipped)

Traffic information guidance, announcement

and warning settings can be adjusted.

.

Traffic Announcement (TA) information can be

received only in the area where the service is

available.

Audio settings

Audio settings can be adjusted from the audio

setup screen.

JVH1561X

System settings

Various system settings can be adjusted.

Type A (Example)

1. Push the SETUP button.

2. Select the “Audio” key.

2. Select the “System” key.

3. Select the item you wish to adjust.

Bass/Treble/Balance/Fade:

Display:

Touch the adjustment bar next to the corre-

sponding keys on the display to adjust the tone

quality and speaker balance.

Select the corresponding keys to adjust the

settings.

.

Brightness:

The levels of these features can also be

adjusted with the ENTER/Scroll dial. See “FM-

AM radio with Compact Disc (CD) player (Type

D)” (P.4-66) for audio operations.

Adjusts the brightness of the display.

Display Mode:

JVH1507X

.

Type B (Example)

Push the SETUP button to view and adjust the

following setting items.

Adjusts to fit the level of lighting in the

vehicle. Touch the “Display Mode” key to

cycle through options of the mode (Day,

Night and Auto).

Speed Sensitive Vol.:

Speed sensitive volume function increases the

volume of the audio system as the speed of the

vehicle increases. Choose the desired effect

level from 0 (OFF) to 5. The higher the setting,

the more the volume increases in relation to

vehicle speed.

Available items:

.

Scroll Direction:

.

Audio

Adjusts the direction of the menu scroll.

Choose either the up arrow or the down

arrow.

Navigation

Traffic Messages (if equipped)

4-6 Display screen, heater and air conditioner, and audio system

REAR VIEW MONITOR (if equipped)

When the shift lever is shifted into the “R”

(Reverse) position, the monitor display shows

the view to the rear of the vehicle.

Clock:

Camera Settings (if equipped):

Select the corresponding keys to adjust the

settings.

See “How to adjust the screen” (P.4-10) or “How

to adjust the screen” (P.4-26) for details.

The system is designed as an aid to the driver

in detecting large stationary objects to help

avoid damaging the vehicle. The system will

not detect small objects below the bumper and

may not detect objects close to the bumper or

on the ground.

.

Time Format:

Temperature Unit:

The time setting can be selected from 12

hour and 24 hour formats.

Select the temperature unit from °C and °F.

Touch Click:

Date Format:

Turns the touchscreen click feature on or off.

When turned on, a click sound will be heard

every time a key on the screen is touched.

The format of the day, month and year

display can be selected.

Clock Mode:

WARNING:

Select the clock mode from “Manual”, “Time

Zone” and “Auto”.

Beep Tones:

Failure to follow the warnings and instruc-

tions for proper use of the rear view monitor

could result in serious injury or death.

Turns the beep tones feature on or off. When

turned on, a beep sound will be heard as a pop-

up message appears on the screen.

When “Manual” is selected, you can set the

clock mode manually from the “Set Clock

Manually” screen.

.

The rear view monitor is a convenience

but it is not substitute for proper

Factory Settings:

a

Select “Auto” to automatically maintain the

time using GPS.

backing. Always turn and look out the

windows, and check mirrors to be sure

that it is safe to move before operating

the vehicle. Always back up slowly.

Select this key to return all settings to default.

.

Set Clock Manually:

Software Licenses (if equipped):

Mode (AM/PM) (if equipped), “Hours”, “Min-

utes”, “Day”, “Month” and “Year” can be set

manually if “Manual” is selected in the Clock

Mode setting.

Select this key to view software license infor-

mation.

.

The system is designed as an aid to the

driver in showing large stationary objects

directly behind the vehicle, to help avoid

damaging the vehicle.

Phone & Bluetooth/Telephone & Blue-

tooth settings

.

Daylight Savings Time*:

Turns the daylight savings time on or off.

Time Zone*:

Phone

&

Bluetooth/Telephone

&

Bluetooth

.

The system cannot completely eliminate

blind spots and may not show every

object.

settings can be changed. See “Bluetooth®

settings” (P.4-93) for details.

Select the applicable time zone from the

list.

Underneath the bumper and the corner

areas of the bumper cannot be viewed on

the rear view monitor because of its

monitoring range limitation. The system

will not show small objects below the

bumper, and may not show objects close

to the bumper or on the ground.

Radio settings (if equipped)

*: The setting operation is available only when

“Time Zone” is selected among the “Clock

Mode” setting menu.

RDS (if equipped) and Traffic Announcement

(TA) related settings can be turned on or off.

When this item is turned on, the received traffic

announcement information will be tuned to

automatically when received.

Language:

Select

screen.

a

language to be displayed on the

Traffic Announcement (TA) information can be

received only in the area where the service is

available.

.

Objects viewed in the rear view monitor

a

differ from actual distance because

wide-angle lens is used.

Display screen, heater and air conditioner, and audio system 4-7

.

Objects in the rear view monitor will

appear visually opposite than when

viewed in the rear view and outside

mirrors.

and distances to objects with reference to the

bumper line are displayed on the monitor.

DIFFERENCE BETWEEN PREDICTIVE AND

ACTUAL DISTANCES

Distance guide lines:

Backing up on a steep uphill

Indicate distances from the bumper.

.

Make sure that the back door is securely

closed when backing up.

.

Red line : approx. 0.5 m (1.5 ft)

Yellow line : approx. 1 m (3 ft)

Green line : approx. 2 m (7 ft)

Green line : approx. 3 m (10 ft)

Do not put anything on the rear view

camera.

When washing the vehicle with high

pressure water, be sure not to spray it

around the camera. Otherwise, water

may enter the camera unit causing water

condensation on the lens, a malfunction,

fire or an electric shock.

Vehicle width guide lines

:

Indicate the approximate vehicle width.

.

Do not strike the camera. It is a precision

instrument. Otherwise, it may malfunc-

tion or cause damage resulting in a fire or

an electric shock.

CAUTION:

Do not scratch the camera lens when clean-

ing dirt or snow from the lens.

HOW TO READ DISPLAYED LINES

JVH0207X

When backing up the vehicle up a hill, the

distance guide lines and the vehicle width

guide lines are shown closer than the actual

distance. For example, the display shows 1 m (3

ft) to the place , but the actual 1 m (3 ft)

distance on the hill is the place . Note that any

object on the hill is further than it appears on

the monitor.

SAA2776

Guiding lines which indicate the vehicle width

4-8 Display screen, heater and air conditioner, and audio system

Backing up on a steep downhill

Backing up near a projecting object

Backing up behind a projecting object

JVH0208X

JVH0232X

JVH0247X

When backing up the vehicle down a hill, the

distance guide lines and the vehicle width

guide lines are shown further than the actual

distance. For example, the display shows 1 m (3

ft) to the place , but the actual 1 m (3 ft)

distance on the hill is the place . Note that any

object on the hill is closer than it appears on

the monitor.

The vehicle may seem to nearly clear the object

in the display. However, the vehicle may hit the

object if it projects over the actual backing up

course.

The position

position in the display. However, the position

is actually at the same distance as the

position The vehicle may hit the object

when backing up to the position if the object

projects over the actual backing up course.

is shown further than the

.

Display screen, heater and air conditioner, and audio system 4-9

the ENTER/Scroll dial

.

HOW TO ADJUST THE SCREEN

Adjusting screen (Type A)

Adjust screen (Type C)

Adjusting screen (Type B)

Operation with touch screen:

1. Push the SETUP button.

2. Select the “System” key.

3. Select the “Camera Settings” key.

4. Select the item you wish to adjust.

.

Display Mode:

Adjusts to fit the level of lighting in the

vehicle. Touch the “Display Mode” key to

cycle through options of the mode (Day,

Night and Auto).

WAE0518X

JVH0653X

1. Push the CAMERA button

.

Brightness:

2. Touch the “Display Settings” key.

1. Push the ENTER/SETTING button

.

Adjusts the brightness of the display.

Contrast:

3. Select the setting items you wish to adjust

by touching or by turning and pushing the

2. Turn the TUNE·FOLDER dial to highlight

the “Brightness” or the “Contrast” key.

Adjusts the level of contrast.

Colour:

TUNE·SCROLL dial

.

3. Push the ENTER/SETTING button

.

Available setting items:

Adjusts the level of the color.

4. Adjust the level using the TUNE·FOLDER dial

and then push the ENTER/SETTING

.

Brightness

Contrast

Operation with buttons:

button

to apply the adjustment.

Tint

NOTE:

Colour / Color

Black Level

Do not adjust the Brightness or Contrast of

the rear view monitor while the vehicle is

moving.

The “Display Settings” key can also be shown by

pushing the MENU button touching the

,

“Settings” key and then touching the “Camera”

key.

JVH0649X

To adjust the screen brightness when the rear

view monitor is displayed, push the brightness

control/display on·off

button

.

Adjust brightness to the preferred setting using

4-10 Display screen, heater and air conditioner, and audio system

INTELLIGENT AROUND VIEW MONITOR/

AROUND VIEW MONITOR (if equipped)

water.

OPERATING TIPS

.

When the shift lever is shifted to the “R”

(Reverse) position, the monitor screen

automatically changes to the rear view

monitor mode.

.

When the view is switched, the display

images on the screen may be displayed

with some delay.

When the temperature is extremely high or

low, the screen may not clearly display

objects. This is not a malfunction.

WAE0029X

When strong light is directly coming on the

camera, objects may not be displayed

clearly. This is not a malfunction.

Type A

Vertical lines may be seen in objects on the

screen. This is due to strong reflected light

from the bumper. This is not a malfunction.

.

The screen may flicker under fluorescent

light. This is not a malfunction.

The colors of objects on the rear view

monitor may differ somewhat from the

actual color of objects. This is not a mal-

function.

.

Objects on the monitor may not be clear in

a dark environment. This is not a malfunc-

tion.

JVH1559X

Type B

If dirt, rain or snow accumulates on the

camera, the rear view monitor may not

display object clearly. Clean the camera.

Do not use alcohol, benzine, or thinner to

clean the camera. This will cause discolora-

tion. To clean the camera, wipe with a cloth

dampened with diluted mild cleaning agent

and then wipe with a dry cloth.

.

Do not damage the camera as the monitor

screen may be adversely affected.

Do not use wax on the camera window.

JVH0648X

Wipe off any wax with

dampened with mild detergent diluted with

a

clean cloth

Type C

With the ignition switch in the “ON” position,

Display screen, heater and air conditioner, and audio system 4-11

push the CAMERA button (if equipped)/DISP

button (if equipped) or move the shift lever to

the “R” (Reverse) position to operate the

Intelligent Around View Monitor/Around View

Monitor. The monitor displays various views of

the position of the vehicle.

areas where objects cannot be viewed.

Always look out the windows and check

mirrors to be sure that it is safe to move.

.

The driver is always responsible for

safety during parking and other maneu-

vers.

Available views:

Do not use the Intelligent Around View

Monitor/Around View Monitor with the

outside mirror in the stored position, and

make sure that the back door is securely

closed when operating the vehicle using

the Intelligent Around View Monitor/

Around View Monitor.

.

Bird’s-eye View

The surrounding view of the vehicle.

Front-side View

.

The view around and ahead of the front

passenger’s side wheel.

.

Front View

.

The distance between objects viewed on

the Intelligent Around View Monitor/

Around View Monitor differs from the

actual distance.

The view to the front of the vehicle.

Rear View

The view to the rear of the vehicle.

The system is designed as an aid to the driver

in situations such as slot parking or parallel

parking.

The cameras are installed above the front

grille, the outside mirrors and above the

rear license plate. Do not put anything on

the cameras.

Do not cover the rear license plate. The

Intelligent Around View Monitor/Around

View Monitor can not be displayed cor-

rectly by interfering with the camera

screen.

JVH1573X

There are some areas where the system will

not display objects. When in the front or the

rear view display, an object below the bumper

.

When washing the vehicle with high-

pressure water, be sure not to spray it

around the cameras. Otherwise, water

may enter the camera unit causing water

condensation on the lens, a malfunction,

fire or an electric shock.

or on the ground may not be displayed

.

When in the bird’s-eye view, a tall object near

the seam of the camera detecting areas will

not appear in the monitor

.

Do not strike the cameras. They are

precision instruments. Doing so could

cause a malfunction or cause damage

resulting in a fire or an electric shock.

WARNING:

.

The Intelligent Around View Monitor/

Around View Monitor is convenient

feature but it is not substitute for

proper vehicle operation because it has

a

4-12 Display screen, heater and air conditioner, and audio system

.

Green line : approx. 3 m (10 ft)

Vehicle width guide lines

Indicate the approximate vehicle width.

Predictive course lines

Front and rear view

CAUTION:

:

Clean the camera lens with soft cloth to keep

it free from dirt, snow, etc. Do not scratch the

lens when cleaning.

:

Indicate the predictive course when operating

the vehicle. The predictive course lines will be

displayed on the monitor when the steering

wheel is turned. The predictive course lines will

move depending on how much the steering

wheel is turned. When the rear view is dis-

played, predictive course lines will not be

displayed while the steering wheel is in the

neutral position.

AVAILABLE VIEWS

WARNING:

.

The distance guide line and the vehicle

width line should be used as a reference

only when the vehicle is on a paved, level

surface. The distance viewed on the

monitor is for reference only and may

be different than the actual distance

between the vehicle and displayed ob-

jects.

SAA1840

Front view

The front view will not be displayed when the

vehicle speed is above 10 km/h (6 MPH).

WARNING:

.

Use the displayed lines and the bird’s-eye

view as a reference. The lines and the

bird’s-eye view are greatly affected by

the number of occupants, fuel level,

vehicle position, road condition and road

grade.

.

The distance between objects viewed in

the rear view may differ from the actual

distance. Objects in the rear view will

appear visually opposite from those

viewed in the inside and outside mirrors.

.

On

a

snow-covered or slippery road,

.

If the tires are replaced with different

sized tires, the predictive course line and

the bird’s-eye view may be displayed

incorrectly.

there may be a difference between the

predictive course line and the actual

course line.

SAA1896

Rear view

Guiding lines, which indicate the vehicle width

and distances to objects with reference to the

The displayed lines on the rear view will

appear slightly off to the right because

the rear view camera is not installed in

the rear center of the vehicle.

When driving the vehicle up a hill, objects

viewed in the monitor are further than

they appear. When driving the vehicle

down a hill, objects viewed in the monitor

are closer than they appear.

vehicle body line

monitor.

,

are displayed on the

Distance guide lines:

NOTE:

Indicate distances from the vehicle body.

.

Use the mirrors or actually look to prop-

erly judge distances to other objects.

When the monitor displays the front view and

the steering wheel turns about 90 degrees or

less from the neutral position, both the right

and left predictive course lines

played. When the steering wheel turns about

90 degrees or more, a predictive course line

.

Red line

: approx. 0.5 m (1.5 ft)

Yellow line : approx.1 m (3 ft)

Green line : approx. 2 m (7 ft)

The vehicle width and predictive course

lines are wider than the actual width and

course.

are dis-

Display screen, heater and air conditioner, and audio system 4-13

is displayed only on the opposite side of the

turn.

space.

WARNING:

The vehicle icon

shows the position of the

.

Objects in the bird’s-eye view will appear

further than the actual distance because

the bird’s-eye view is a pseudo view that

is processed by combining the views

from the cameras on the outside mirrors,

the front and the rear of the vehicle.

vehicle. Note that the distance between objects

viewed in the bird’s-eye view differs from the

actual distance.

Bird’s-eye view (Type A)

The areas that the cameras cannot cover are

indicated in black.

After the ignition switch is placed in the “ON”

is high-

Tall objects, such as a curb or vehicle,

may be misaligned or not displayed at

the seam of the views.

position, the non-viewable area

lighted in yellow for 3 seconds after the bird’s-

eye view is displayed.

.

Objects that are above the camera can-

not be displayed.

In addition, the non-viewable corners

displayed in red to remind the driver to be

cautious.

are

The view for the bird’s-eye view may be

misaligned when the camera position

alters.

SAA1841

After the ignition switch is placed in the “ON”

position, the non-viewable corners

for seconds after the bird’s-eye view is

displayed.

will blink

The bird’s-eye view shows the overhead view of

the vehicle which helps confirm the vehicle

position and the predicted course to a parking

space.

.

A line on the ground may be misaligned

and is not seen as being straight at the

seam of the views. The misalignment will

increase as the line proceeds away from

the vehicle.

3

WARNING:

The vehicle icon

shows the position of the

vehicle. Note that the distance between objects

viewed in the bird’s-eye view differs from the

actual distance.

.

Objects in the bird’s-eye view will appear

further than the actual distance because

the bird’s-eye view is a pseudo view that

is processed by combining the views

from the cameras on the outside mirrors,

the front and the rear of the vehicle.

Bird’s-eye view (Type B)

The areas that the cameras cannot cover are

indicated in black.

After the ignition switch is placed in the “ON”

is highlighted

.

Tall objects, such as a curb or vehicle,

may be misaligned or not displayed at

the seam of the views.

position, the nonviewable area

in yellow for 3 seconds after the bird’s-eye view

is displayed.

.

Objects that are above the camera can-

not be displayed.

When the vehicle moves closer to an object, the

parking sensor (sonar) indicators

equipped) appear. See “Camera aiding parking

sensor (sonar) function” (P.4-17) for more in-

formation.

(if

The view for the bird’s-eye view may be

misaligned when the camera position

alters.

SAA3570

.

A line on the ground may be misaligned

and is not seen as being straight at the

seam of the views. The misalignment will

increase as the line proceeds away from

The bird’s-eye view shows the overhead view of

the vehicle which helps confirm the vehicle

position and the predictive course to a parking

4-14 Display screen, heater and air conditioner, and audio system

the vehicle.

.

The turn signal light may overlap with the

side-of-vehicle line. This is not a mal-

function.

distance on the hill is the place

any object on the hill is viewed in the monitor

further than it appears.

. Note that

Front-side view

Backing up on a steep downhill

DIFFERENCE BETWEEN PREDICTIVE AND

ACTUAL DISTANCES

Backing up on a steep uphill

SAA1842

Guiding lines:

Guiding lines that indicate the width and the

front end of the vehicle are displayed on the

monitor.

The front-of-vehicle line shows the front part

of the vehicle.

The side-of-vehicle line shows the vehicle

width including the outside mirrors.

The extensions of both the front

lines are shown with a green dotted line.

and side

The parking sensor (sonar) indicator

(if

equipped) will appear when the vehicle moves

closer to an object. The parking sensor (sonar)

indicator

(if equipped) can be turned off

JVH0208X

when the Front Sensor setting is turned off on

the vehicle information display. See “Driver

Assistance” (P.2-22).

When backing up the vehicle down a hill, the

distance guide lines and the vehicle width

guide lines are shown further than the actual

distance. For example, the display shows 1 m (3

, but the actual 1 m (3 ft)

. Note that

any object on the hill is viewed in the monitor

closer than it appears.

JVH0207X

CAUTION:

When backing up the vehicle up a hill, the

distance guide lines and the vehicle width

guide lines are shown closer than the actual

distance. For example, the display shows 1 m (3

ft) to the place

distance on the hill is the place

.

Do not scratch the camera lens when

cleaning dirt or snow.

ft) to the place

, but the actual 1 m (3 ft)

Display screen, heater and air conditioner, and audio system 4-15

Backing up near a projecting object

Backing up behind a projecting object

HOW TO SWITCH THE DISPLAY

JVH0874X

With the ignition switch in the “ON” position,

push the CAMERA button (if equipped)/DISP

button (if equipped) or move the shift lever to

the “R” (Reverse) position to operate the

Intelligent Around View Monitor/Around View

Monitor.

The Intelligent Around View Monitor/Around

View Monitor can display two split views.

If the shift lever is not in the “R” (Reverse)

position, the available views are:

.

Front view/bird’s-eye view split screen

Front view/front-side view split screen

JVH0787X

JVH0211X

If the shift lever is in the “R” (Reverse) position,

the available views are:

The predictive course lines

do not touch the

The position

position in the display. However, the position

is actually at the same distance as the

is shown further than the

object on the display. However, the vehicle may

hit the object if it projects over the actual

moving course.

.

Rear view/bird’s-eye view split screen

Rear view/front-side view split screen

Rear view (if equipped)

position

. The vehicle may hit the object

when backing up to the position if the object

projects over the actual moving course.

The display automatically changes to the

Intelligent Around View Monitor/Around View

Monitor displaying front view/bird’s-eye view

when:

.

The shift lever is in the “D” (Drive) position

(CVT/DCT model) or the shift lever is out of

the “R” (Reverse) position (MT model), and

4-16 Display screen, heater and air conditioner, and audio system

the parking sensor (sonar) (if equipped)

detects that the vehicle is approaching an

object.

WARNING:

MOVING OBJECT DETECTION (MOD)

FUNCTION (if equipped)

The Moving Object Detection (MOD) system can

inform the driver of moving objects when

driving out of garages, maneuvering into park-

ing lots and in other such instances.

.

The parking sensor (sonar) function is not

designed to prevent the object.

The display will switch back to the previously

displayed screen from the Intelligent Around

View Monitor/Around View Monitor screen

when:

The colors of the parking sensor (sonar)

indicator and the distance guide lines in

the front/rear view indicate different

distances to the object.

.

The shift lever is in the “D” (Drive) position

(CVT/DCT model) or the shift lever is out of

the “R” (Reverse) position (MT model), and

the vehicle speed increases above approxi-

mately 10 km/h (6 MPH).

The MOD system detects moving objects by

using image processing technology on the

image shown on the display.

.

Inclement weather may affect the func-

tion of the parking sensor (sonar) system;

this may include reduced performance or

a false activation.

The MOD system operates in the following

conditions when the camera view is displayed:

.

A different screen is selected (when the

shift lever is not in the “R” (Reverse) posi-

tion).

This function is designed as an aid to the

driver in detecting large stationary ob-

jects to help avoid damaging the vehicle.

The system will not detect small objects

below the bumper, and may not detect

objects that are too close to the bumper

or on the ground.

.

When the shift lever is in the “P” (Park) or “N”

(Neutral) position (CVT/DCT model) or the

shift lever is out of the “R” (Reverse) position

(MT model) and the vehicle is stopped, the

MOD system detects the moving objects in

the bird’s-eye view. The MOD system will

not operate if the outside mirror is moving

in or out or if either door is opened.

CAMERA AIDING PARKING SENSOR (so-

nar) FUNCTION (if equipped)

When the vehicle moves closer to the object

while the Intelligent Around View Monitor/

Around View Monitor is displayed, an indicator

is displayed and a tone is sounded by the

parking sensor (sonar) function to warn the

driver.

.

If your vehicle sustains damage to the

bumper fascia, leaving it misaligned or

bent, the sensing zone may be altered

causing inaccurate measurement of ob-

stacles or false alarms.

.

When the shift lever is in the “D” (Drive)

position (CVT/DCT model) or the shift lever

is out of the “R” (Reverse) position (MT

model), and the vehicle speed is below

approximately 8 km/h (5 MPH), the MOD

system detects moving objects in the front

view.

The color of the parking sensor (sonar) indica-

tor and the pattern of the tone vary according

to the distance to the object.

CAUTION:

.

Keep the interior of the vehicle as quiet as

possible to hear the tone clearly.

Keep the parking sensor (sonar) (located on the

front (if equipped) and rear bumper fascia) free

from snow, ice and large accumulations of dirt.

Do not clean the sensors (sonar) with sharp

objects. If the sensors (sonar) are covered, the

accuracy of the parking sensor (sonar) function

will be diminished.

When the shift lever is in the “R” (Reverse)

position and the vehicle speed is below

approximately 8 km/h (5 MPH), the MOD

system detects moving objects in the rear

view. The MOD system will not operate

correctly if the back door is open.

The front and rear parking sensors (so-

nar) detect the distance between the

vehicle and the obstacle by detecting

the sound wave reflected from the sur-

face of the obstacle. When there is

a

The MOD system does not detect moving

objects in the front-side view. The MOD icon is

not displayed on the screen when in this view.

sound such as horn, or an ultrasonic

source (such as parking sensors of other

vehicles) around the vehicle, the sensor

(sonar) may not detect objects properly.

The tone sound and the sensor (sonar) indica-

tor display can be turned on/off, and the

volume of the tone sound and the sensor

(sonar) detection range can be adjusted. (See

“Driver Assistance” (P.2-22).)

Display screen, heater and air conditioner, and audio system 4-17

.

When the ignition switch is placed in the

“OFF” position and then back to the “ON”

position.

WARNING:

.

The MOD system is not a substitute for

proper vehicle operation and does not

prevent contact with the objects sur-

rounding the vehicle. When maneuvering,

always use the outside mirror and inside

rearview mirror and turn and look to

check the surroundings to make sure it

is safe to maneuver.

The MOD system can be set to remain inactive

in the vehicle information display. (See “Driver

Assistance” (P.2-22).)

WARNING:

.

Excessive noise (for example, audio sys-

tem volume or open vehicle window) will

interfere with the chime sound, and it

may not be heard.

.

The system is deactivated at speeds

above 10 km/h (6 MPH). It is reactivated

at lower speeds.

JVH0873X

front view / rear view

In the bird’s-eye view, the yellow frame

is

The MOD system performance will be

limited according to environmental con-

ditions and surrounding objects such as:

.

The system is not designed to prevent

contact with all objects.

displayed on each camera image (front, rear,

right, left) depending on where moving objects

are detected.

The MOD system is not designed to

detect surrounding stationary objects.

— When there is low contrast between

background and the moving objects.

The yellow frame

front view or rear view modes.

is displayed on view in the

When the MOD system detects a moving object

surrounding the vehicle, the yellow frame will

be displayed on the view where the objects are

detected and a chime will sound once. While

the MOD system continues to detect moving

objects, the yellow frame continues to be

displayed.

— When there is blinking source of light.

While the sensor (sonar) is beeping, the MOD

system does not chime.

— When strong light such as another

vehicle’s headlight or sunlight is pre-

sent.

The MOD icon is displayed in blue in the view

where the MOD system is operative. The MOD

icon is displayed in gray in the view where

the MOD system is not operative.

— When there is dirt, water drops or

snow on the camera lens.

— When the position of the moving

objects in the display is not changed.

If the MOD system is turned off, the MOD icon

is not displayed.

.

The MOD system might detect flowing

water droplets on the camera lens, white

smoke from the muffler, moving sha-

dows, etc.

The MOD system will activate automatically

under the following conditions:

.

When the shift lever is in the “R” (Reverse)

position.

.

The MOD system may not function prop-

erly depending on the speed, direction,

distance or shape of the moving objects.

.

When the CAMERA button (if equipped)/

DISP button (if equipped) is pushed to

switch from

camera view on the display.

a

different screen to the

If your vehicle sustains damage to the

parts where the camera is installed, leav-

ing it misaligned or bent, the sensing

zone may be altered and the MOD system

may not detect objects properly.

JVH0872X

.

When vehicle speed decreases below ap-

proximately 8 km/h (5 MPH).

bird’s-eye view

4-18 Display screen, heater and air conditioner, and audio system

.

When the temperature is extremely high

or low, the screen may not display ob-

jects clearly. This is not a malfunction.

Parallel parking

WARNING:

Displayed keys and icons:

.

The Intelligent Park Assist is designed to

support the driver’s steering wheel op-

Turning the MOD system on or off

eration in

a

parking lot. It does not

automatically lower the vehicle speed or

avoid contact with objects. As when

performing ordinary parking maneuvers,

always look out the windows and check

with your own eyes to be sure that the

surrounding and road conditions are safe

for the maneuvers before operating the

vehicle. Operate the vehicle slowly during

the parking maneuvers. If the vehicle

gets close to people or objects near the

vehicle, avoid making contact by using

the brakes and performing other maneu-

vers.

The MOD system is turned on or off using the

vehicle information display. See “Driver Assis-

tance” (P.2-22).

MOD malfunction

When the orange MOD icon is displayed in the

view, the system is not functioning properly.

This will not hinder normal driving operation

but the system should be inspected by

NISSAN dealer.

a

JVH1564X

Camera maintenance

If dirt, rain or snow accumulates on the camera,

the MOD system may not operate properly.

Clean the camera.

.

Do not touch the spoke of the steering

wheel while the Intelligent Park Assist is

operating. It could cause injuries to hands

or fingers. Keep neckties, scarves, etc.

away from the steering wheel since they

may get entangled and cause unex-

pected accidents.

The camera washer operates automatically

when dirt is detected on the camera during

driving. The washer then stops operation after

a period of time.

INTELLIGENT PARK ASSIST (if equipped)

The Intelligent Park Assist is designed to assist

the driver with parallel and perpendicular

parking.

JVH1016X

This system will operate the steering wheel to

park the vehicle in the parking space set by the

driver on the bird’s-eye view screen (perpendi-

cular mode), or measured by parking sensors

(sonar) in the left/right side of the front bumper

(parallel mode). Screen guidance for the shift

lever operation is also provided during the

parking maneuvers.

Display screen, heater and air conditioner, and audio system 4-19

Starting the system:

Parallel parking operation

JVH1021X

JVH1565X

:

Touch this key to activate the Intelligent

Park Assist system.

.

Drive forward at reduced speed.

Push the CAMERA button, and touch

on the display.

:

The green “PA” icon indicates that the

Intelligent Park Assist is operating.

NOTE:

.

At a vehicle speed over 30 km/h (19 MPH),

the system will close and the display will

disappear.

Cancel:

Touch this key to cancel the Intelligent

Park Assist operation.

.

If the bird’s-eye view is not displayed on

the front passenger side of the screen,

push the CAMERA button until the bird’s-

eye view is displayed.

:

Touch this key to select perpendicular

mode.

.

At a vehicle speed over 10 km/h (6 MPH),

the camera view will not display.

:

JVH0835X

Indicates that an automated steering

control is operating.

Parallel parking mode is selected by

default.

4-20 Display screen, heater and air conditioner, and audio system

Finding a parking space:

Moving the vehicle backward:

Finishing the parking operation:

When the vehicle is positioned in the parking

space, depress the brake and stop the vehicle.

Touch the “Cancel” key to terminate the

Intelligent Park Assist system.

NOTE:

.

Make any necessary adjustments manu-

ally and make turns in reverse as re-

quired. Depending on the situation, shift

lever operations may be required several

times for maneuvering the vehicle into

the parking space.

JVH1014X

JVH1018X

.

If the vehicle reaches the approximate

area of the target parking space found, a

chime will sound. A message indicating

that the Intelligent Park Assist operation

is finishing will appear on the display and

the Intelligent Park Assist operation will

terminate automatically.

.

Slowly move the vehicle forward, and the

system will search for a parking space.

.

Place the shift lever in the “R” (Reverse)

position.

The system will indicate that

space has been found.

a

parking

Gently place hands on the steering wheel

(the steering wheel will be operated auto-

matically) and slowly move the vehicle in

reverse into the parking space by moderat-

ing the amount of pressure you apply to

the brake.

NOTE:

.

Use the turn signal switch to select the

preferred side for parking.

Deactivation of Intelligent Park Assist:

The Intelligent Park Assist will deactivate under

the following conditions.

.

The system cannot detect

a

parking

.

Stop the vehicle completely when the

vehicle reaches the proper position to

change the movement direction. Then

change the shift lever for forward or rear-

ward movement. Repetitions of this opera-

tion may be required for aligning the

vehicle straight.

space that is not bordered by objects

such as vehicles.

.

When the steering wheel is operated manu-

ally.

Moving the vehicle forward:

When the shift lever is placed in the “P”

(Park) position (CVT/DCT model).

Slowly move the vehicle forward further to the

position for backing up, and then stop the

vehicle completely. The system will provide

guidance using chime, indicating that the

vehicle has reached the proper position for

starting the automatic steering operation.

When 5 seconds have passed since the shift

lever was placed and kept in the “N”

(Neutral) position.

NOTE:

.

The system will guide the vehicle to a

position where

required.

.

When the system judges that the condi-

tions (such as worn out or low pressure

tires, road conditions, etc.) are not suitable

for correct course predictions.

a

direction change is

.

A warning chime will sound when the

vehicle speed exceeds the speed limit for

the Intelligent Park Assist operation.

.

When the vehicle speed exceeds approxi-

mately 7 km/h (4 MPH).

When the parking operation by the driver

deviates from the Intelligent Park Assist

guidance to some extent.

Display screen, heater and air conditioner, and audio system 4-21

Indicates a position at which to make a

turn in reverse.

Perpendicular parking

Displayed keys and icons:

:

Indicates that an automated steering

control is operating.

Perpendicular parking operation

JVH1022X

:

Touch this key to activate the Intelligent

Park Assist system.

JVH1564X

Target parking rectangle (blue):

Indicates the target parking position.

:

The green “PA” icon indicates that the

Intelligent Park Assist is operating.

Cancel:

Touch this key to cancel the Intelligent

Park Assist operation.

Start:

Touch this key to start the Intelligent Park

Assist operation.

JVH1023X

:

Touch this key to select the parallel mode.

:

Touch this key to adjust the location of

the target parking rectangle.

JVH0840X

Clearance guidelines (red):

Starting the system and selecting parking

mode:

Indicates an approximate space required

for parking.

1. Stop the vehicle near the space where you

wish to park.

Reverse starting position rectangle

(green):

4-22 Display screen, heater and air conditioner, and audio system

2. Push the CAMERA button and touch

on the display.

— Check the position of the lines and

rectangles with the actual parking

space on the screen while the vehicle

is not in motion.

Setting the target parking position and

starting the operation:

— Move the vehicle at a low speed

while checking the surroundings for

safety with your own eyes.

— Stop the vehicle again to make sure

that the vehicle position is in the right

place.

.

Make sure that any objects are located

outside the clearance guidelines (red).

Otherwise, the vehicle may hit the

objects during the maneuvers. Refer

to the following examples.

JVH1565X

JVH1015X

3. Touch

to select the perpendicular

1. Slowly move the vehicle forward and stop

approximately 1 m (3 ft) beside the parking

space.

Example of perpendicular parking:

parking mode.

When the vehicle is stopped at parking lots

with parking lines on the ground, the

Intelligent Park Assist system will search

for the lines and make fine adjustments to

the target parking location automatically.

Fine adjustments by the driver may be

required at parking lots without parking

lines or when the automatic fine adjust-

ments using the parking lines do not work.

Adjust the target parking rectangle (blue)

position by touching

JVH0719X

JVH1014X

.

: Good example

: Bad example

NOTE:

.

Use the turn signal switch to select a

preferred side for parking.

.

2. Touch the “Start” key on the screen.

The target parking rectangle needs to

be positioned near the actual parking

space before fine adjustments can be

The Intelligent Park Assist operation can be

started when the following conditions are

met.

made by touching

. The instruc-

tions for vehicle movement during the

adjustment are as follows.

.

The brake pedal is stepped on.

Display screen, heater and air conditioner, and audio system 4-23

.

The vehicle is completely stopped.

NOTE:

.

If the vehicle reaches the approximate

area of the target parking space, a chime

will sound. A message indicating that the

Intelligent Park Assist operation is ending

will appear on the display and the system

will terminate automatically.

The steering wheel is in the straight

position.

A warning chime will sound when the vehicle

speed exceeds the speed limit for the In-

telligent Park Assist operation.

.

The shift lever is in the positions for

forward movement, such as “D” (Drive)

position (CVT/DCT model) or “1” (1st)

position (MT model).

Moving the vehicle backward:

Adjusting the target parking position:

Moving the vehicle forward:

JVH1020X

.

Place the shift lever in the “R” (Reverse)

position.

JVH1025X

JVH1019X

When setting a target parking position, you can

make a fine adjustment of the target parking

rectangle (blue) position.

Gently place hands on the steering wheel

(the steering wheel will be operated auto-

matically) and slowly move the vehicle in

reverse into the parking space by moderat-

ing the amount of pressure you apply to

the brake.

.

Gently place hands on the steering wheel

(the steering wheel will be operated auto-

matically) and slowly move the vehicle

forward to the reverse starting position

rectangle (green) by moderating the

amount of pressure you apply to the brake.

1. Touch

on the screen.

2. Touch the arrow on the screen for fine

adjustments of the target parking rectan-

gle (blue) position.

Finishing the parking operation:

.

Stop the vehicle completely when the

vehicle reaches the reverse starting posi-

tion rectangle (green).

When the vehicle is positioned in the parking

space, depress on the brake and stop the

vehicle. Touch the “Cancel” key to terminate

the Intelligent Park Assist system.

Make sure that any objects are located

outside the clearance guidelines (red).

Operating tips:

Depress the brake pedal and stop the

vehicle completely when it approaches

another vehicle or object, or when the

vehicle reaches the reverse starting posi-

tion.

.

When the target parking rectangle (blue)

does not fit in the actual parking space

following the correct procedure, check the

surroundings and adjust the location of

your vehicle.

NOTE:

.

Make any necessary adjustments manu-

ally and make turns in reverse as re-

quired. Depending on the situation, shift

lever operations may be required several

times for maneuvering the vehicle into

the parking space.

Up to approximately 70 cm (27 in) of fine

adjustments can be made.

4-24 Display screen, heater and air conditioner, and audio system

Park Assist remains on, the steering

wheel may operate automatically and

may cause unexpected accidents.

parked in the correct spot following the

Intelligent Park Assist operation, etc.

Deactivation of Intelligent Park Assist:

The Intelligent Park Assist will deactivate under

the following conditions.

— When the shift lever is operated while

driving.

.

Make sure that there is enough space for

parking maneuvers before starting to use

the Intelligent Park Assist.

.

When the steering wheel is operated manu-

ally.

— When sudden start, sudden stop or

sudden operation of the shift lever

occurs.

When the shift lever is placed in the “P”

(Park) position (CVT/DCT model).

Keep in mind that the front of the vehicle

may swing out towards oncoming traffic

while the Intelligent Park Assist functions.

— When the tire pressure is too low or the

tire is worn out.

When 5 seconds have passed since the shift

lever was placed and kept in the “N”

(Neutral) position.

— When tires are installed that are of a

different size from the ones that were

equipped at the time of factory ship-

ment.

CAUTION:

.

When reverse operations are conducted

more than 15 times for steering corrections.

Do not use the Intelligent Park Assist under

the following conditions.

When the system judges that the condi-

tions (such as worn out or low pressure

tires, road conditions, etc.) are not suitable

for correct course predictions.

.

When using the parallel parking mode, it

is not always possible for the system to

find an appropriate parking space and

may indicate parking spaces that are not

suitable for parking. Following are exam-

ple conditions for which the system may

not find a parking space correctly.

.

On unpaved roads.

On slippery roads such as snow-covered

or frozen roads.

.

When the vehicle backs up to a position

behind the place from which the Intelligent

Park Assist operation started.

.

On uneven roads with slants, bumps,

curbstones, wheel tracks, etc.

.

When the vehicle passes the reverse start-

ing position by over 2 m (7 ft).

— Parking spaces with objects located

above the height range of parking

sensors (sonar) (i.e., overhanging

loads, tail sections or loading ramps

of goods vehicles).

.

On curved roads.

At mechanical parking facilities.

Where parking or stopping is prohibited.

When the vehicle speed exceeds approxi-

mately 7 km/h (4 MPH).

When the parking operation by the driver

deviates from the Intelligent Park Assist

guidance to some extent.

When tire chains or

installed.

a

spare tire are

— Parking spaces that are partially occu-

pied by trailer drawbars.

.

When the vehicle is being towed.

— Parking spaces that are littered or

overgrown.

Safety notes

WARNING:

When the doors (including the back door)

are not closed.

— Parking spaces where a curb exists

(causing damage of the wheels and

tires).

.

When transporting a load that protrudes

from your vehicle.

.

Do not drive looking only at the screen. It

could cause unexpected accidents or

cause the vehicle to contact surrounding

objects.

— Parking spaces that are blocked by

foliage, grass, paving, blocks, etc.

When the vehicle is laden with heavy

loads.

— Parking spaces bordered by an obsta-

cle (i.e., a tree, a post or a trailer).

NOTE:

Under the conditions listed below, there

.

When assistance from the Intelligent Park

Assist is no longer necessary, turn off the

Intelligent Park Assist by touching the

Cancel key on the screen. If the Intelligent

.

— Parking spaces with objects that ab-

sorb ultrasonic waves such as fabric

and snow.

may be instances in which surrounding

objects or vehicles cut into the vehicle

pathway, or when the vehicle cannot be

Display screen, heater and air conditioner, and audio system 4-25

— During snowfall or heavy rain.

Maintenance

Refer to “Operating tips” (P.4-27) for mainte-

nance of the camera lens.

HOW TO ADJUST THE SCREEN

Adjusting screen (Type A)

— Near objects that emits ultrasonic

waves such as horns of other vehicle,

noise from a motorcycle engine and

large automobile air brake, or sensors

(sonar) of surrounding vehicles.

Blockages like dirt, ice, and objects such as

stickers and accessories installed within the

detection range of the parking sensor (sonar)

may cause incorrect function of the Intelligent

Park Assist. Clean the sensors (sonar) regularly

with care, and do not scratch or damage them.

— When the conditions surrounding the

parking space change (i.e., another

vehicle enters the target parking

space after you pass it).

Operating tips:

.

The parking sensor (sonar) will automati-

cally turn on when the Intelligent Park

Assist is activated. When the Intelligent

Park Assist operation ends, the status of

the parking sensor (sonar) will return to the

mode that it was in before the Intelligent

Park Assist was activated.

WAE0031X

Example

1. Push the MENU button

2. Touch the “Settings” key.

3. Touch the “Camera” key.

.

Depending on the situation, the shift lever

operations may be required several times.

4. Touch the “Display Settings” key.

Malfunction:

5. Select the setting items you wish to adjust

by touching or by turning and pushing the

A warning message will be displayed and the

system will terminate operation when a mal-

function is detected in the Intelligent Park

Assist.

dial

.

Available setting items:

.

Brightness

Contrast

When the warning message is displayed during

the Intelligent Park Assist operation, park the

vehicle in a safe place and restart the engine.

Tint

Colour / Color

Black Level

If the warning message is shown on the display

repeatedly or if the Intelligent Park Assist

cannot be operated after restarting the engine,

this may indicate

a

system malfunction. It

should not hinder normal driving, but the

vehicle should be inspected by a NISSAN dealer.

JVH1568X

Parking sensors (sonar) are located on the

bumpers: 6 on the front bumper and 4 on the

rear bumper.

4-26 Display screen, heater and air conditioner, and audio system

.

Colour:

message is flashing. When more than 6 sec-

onds have elapsed with no operation, the

warning message stops flashing and displays

normally and the language is set.

Adjusting screen (Type B)

Adjusts the level of the color.

Adjust screen (Type C)

OPERATING TIPS

CAUTION:

.

Do not use alcohol, benzine or thinner to

clean the camera. This will cause disco-

loration. To clean the camera, wipe with a

cloth dampened with

a

diluted mild

cleaning agent and then wipe with a dry

cloth.

WAE0071X

.

Do not damage the camera as the moni-

tor screen may be adversely affected.

Operation with buttons:

JVH0660X

To adjust the screen brightness when the

Intelligent Around View Monitor/Around View

Monitor is displayed, push the brightness con-

To set up the Intelligent Around View Monitor/

Around View Monitor display to your preferred

settings, push the ENTER/SETTING button

while the Intelligent Around View Monitor/

Around View Monitor screen is displayed. Each

The screen displayed on the Intelligent

Around View Monitor/Around View Monitor

will automatically return to the previous

screen when no operation takes place for 3

minutes after the CAMERA button (if

equipped)/DISP button (if equipped) has

been pushed while the shift lever is in a

position other than the “R” (Reverse) posi-

tion.

trol/display on·off “

Adjust brightness to the preferred setting using

the ENTER/Scroll dial

Operation with touch screen:

” button

.

time the ENTER/SETTING button

the next setting item is selected. Turn the

TUNE·FOLDER dial to adjust each item.

is pushed,

1. Push the SETUP button

2. Touch the “System” key.

.

Available setting items:

.

The display of images on the screen may be

delayed after screens are switched. Objects

in the Intelligent Around View Monitor/

Around View Monitor may be distorted

momentarily until the Intelligent Around

View Monitor/Around View Monitor screen

is displayed completely.

3. Touch the “Camera Settings” key.

4. Touch the item you wish to adjust.

.

Brightness

Contrast

The setting items will disappear and the display

will return to the original screen if ENTER/

SETTING button

setting item is selected or if the screen is not

operated for some time.

.

Display Mode:

Adjusts to fit the level of lighting in the

vehicle. Touch the “Display Mode” key to

cycle through options of the mode (Day,

Night and Auto).

is pushed when the last

.

When the temperature is extremely high or

low, the screen may not display objects

clearly. This is not a malfunction.

Choosing a language:

.

Brightness:

The warning message on the camera screen

flashes when the DISP button

Adjusts the brightness of the display.

Contrast:

When strong light directly shines on the

camera, objects may not be displayed

clearly. This is not a malfunction.

is pushed and

held for more than 6 seconds. The language of

the warning message changes when the DISP

Adjusts the level of contrast.

button

is pushed again while the warning

Display screen, heater and air conditioner, and audio system 4-27

VENTILATORS

.

The screen may flicker under fluorescent

light. This is not a malfunction.

SIDE VENTILATORS

CENTER VENTILATORS

The colors of objects on the Intelligent

Around View Monitor/Around View Monitor

may differ somewhat from those of the

actual object.

.

Objects on the monitor may not be clear

and the color of the object may differ in a

dark location or at night. This is not a

malfunction.

.

There may be differences in clearness

between each camera view of the bird’s-

eye view.

JVH0663X

JVH0662X

If dirt, rain or snow attaches to the camera,

the Intelligent Around View Monitor/

Around View Monitor may not display

objects clearly. Clean the camera.

Open/close the vents by moving the control to

either direction.

Open/close the vents by moving the control to

either direction.

:

This symbol indicates that the vents

are open. Moving the control to this

direction will open the vents.

:

This symbol indicates that the vents

are open. Moving the control to this

direction will open the vents.

.

Do not use wax on the camera window.

Wipe off any wax with a clean cloth that has

been dampened with

diluted with water.

a

mild detergent

:

This symbol indicates that the vents

are closed. Moving the control to this

direction will close the vents.

:

This symbol indicates that the vents

are closed. Moving the control to this

direction will close the vents.

Adjust the air flow direction of the ventilators

by moving the center knob (up/down, left/

right) until the desired position is achieved.

Adjust the air flow direction of the ventilators

by moving the center knob (up/down, left/

right) until the desired position is achieved.

4-28 Display screen, heater and air conditioner, and audio system

HEATER AND AIR CONDITIONER

For models with Stop/Start System or Idling

Stop System:

REAR VENTILATORS

WARNING:

While the engine is stopped by the Stop/Start

System or the Idling Stop System, switching the

airflow to the front defogger will cause the

engine to automatically restart.

.

The heater and air conditioner operate

only when the engine is running.

Never leave children or adults who would

normally require the support of others

alone in the vehicle. Pets should not be

left alone either. They could unknowingly

activate switches or controls and inad-

vertently become involved in a serious

accident and injure themselves. On hot,

While the engine is running, selecting airflow to

the front defogger will prevent the Stop/Start

System or Idling Stop System from automati-

cally stopping the engine.

When the engine is stopped by the Stop/Start

System or Idling Stop System, heater and air

conditioner performance may be reduced. To

keep full heater and air conditioner perfor-

mance, restart the engine by pushing the Stop/

Start OFF switch or the Idling Stop System OFF

switch, or by placing the ignition switch in the

“ON” position. For more details see “Stop/Start

System or Idling Stop System” (P.5-24).

sunny days, temperatures in

a

closed

vehicle could quickly become high en-

ough to cause severe or possibly fatal

injuries to people or animals.

JVH0879X

Open/close the vents by moving the control to

either direction.

.

Do not use the recirculation mode for

long periods as it may cause the interior

air to become stale and the windows to

fog up.

:

This symbol indicates that the vents

are open. Moving the side control to

this direction will open the vents.

Do not adjust the heating and air con-

ditioning controls while driving so that

full attention may be given to vehicle

operation.

:

This symbol indicates that the vents

are closed. Moving the side control to

this direction will close the vents.

OPERATING TIPS (for automatic air

conditioner)

Adjust the air flow direction of the ventilators

by moving the center knob (up/down, left/

right) until the desired position is achieved.

The heater and air conditioner operate when

the engine is running. The air blower will

operate even if the engine is turned off and

the ignition switch is placed in the “ON” posi-

tion.

NOTE:

.

Odors from inside and outside the vehicle

can build up in the air conditioner unit.

Odor can enter the passenger compart-

ment through the vents.

JVH0727X

.

When parking, set the heater and air

conditioner controls to turn off air recir-

culation to allow fresh air into the pas-

senger compartment. This should help

reduce odors inside the vehicle.

Display screen, heater and air conditioner, and audio system 4-29

MANUAL AIR CONDITIONER AND HEATER (Type A)

JVH0728X

When the engine coolant temperature and

outside air temperature are low, the air flow

from the foot outlets may not operate. How-

ever, this is not a malfunction. After the coolant

temperature warms up, the air flow from the

foot outlets will operate normally.

JVH0664X

1.

“A/C” button/Fan speed control “

Air flow control buttons

” dial

Fan speed control:

2.

3.

Turn the fan speed control “

to increase the fan speed.

” dial clockwise

” dial counter-

“MAX A/C” button/Temperature control

dial

Turn the fan speed control “

clockwise to decrease the fan speed.

The sensors

and , located on the instru-

4.

5.

Front defogger “

” button

ment panel, help maintain a constant tempera-

ture. Do not put anything on or around the

sensors.

Rear defogger “ ” button (See “Defog-

ger switch” (P.2-60).)

Temperature control:

Turn the temperature control dial to set the

desired temperature. Turn the dial between the

middle and the right position to select the hot

temperature. Turn the dial between the middle

and the left position to select the cool tem-

perature.

6.

Air recirculation “

” button

For models with Stop/Start System or Idling

Stop System:

The Stop/Start System or Idling Stop System

will not activate when the front defogger is

turned on.

Controls

Turning system on/off:

To turn on the system, turn the fan speed

control “

” dial out of the OFF position. Turn

the dial counterclockwise to the OFF position

to turn off the system.

4-30 Display screen, heater and air conditioner, and audio system

the previous state, while the indicator light on

the “A/C” button will stay on.

3. Push the front defogger “

indicator light will turn on.)

” button. (The

Air flow control:

Push one of the air flow control buttons to

select the air flow outlets.

4. Turn the temperature control dial to the

desired position between the middle and

the hot (right) position.

Heater operation

—

Air flows mainly from center and side

ventilators.

Heating:

This mode is used to direct heated air from the

foot outlets.

To remove frost from the windshield

quickly, turn the temperature control dial

to the maximum hot (right) position and

Air flows mainly from center and side

ventilators and foot outlets.

1. Push the air recirculation “

” button for

Air flows mainly from the foot outlet

and partly from the defogger.

the fan speed control

maximum position.

“

” dial to the

normal heating. (The indicator light will turn

off.)

Air flows mainly from the defogger

and foot outlets.

Heating and defogging:

2. Push the “

will turn on.)

” button. (The indicator light

This mode heats the interior and defogs the

windows.

Air intake control:

3. Turn the fan speed control “

desired position.

” dial to the

The air intake control mode will change each

time the air recirculation

pushed.

1. Push the air recirculation “

indicator light will turn off.)

” button. (The

“

”

button is

4. Turn the temperature control dial to the

desired position between the middle and

the hot (right) position.

2. Push the “

will turn on.)

” button. (The indicator light

.

When the indicator light is turned on, the air

recirculates inside the vehicle.

3. Turn the fan speed control “

desired position.

” dial to the

Ventilation:

.

When the indicator light is turned off, the air

flow is drawn from outside the vehicle.

This mode directs outside air from the side and

center ventilators.

4. Turn the temperature control dial to the

maximum hot (right) position.

A/C (Air Conditioner) operation:

1. Push the air recirculation “

indicator light will turn off.)

” button. (The

Push the “A/C” button to turn on or off the air

conditioner. When the air conditioner is on, the

“A/C” indicator light on the button illuminates.

Air conditioner operation

2. Push the “

will turn on.)

” button. (The indicator light

The air conditioner system should be operated

for approximately 10 minutes at least once a

month. This helps prevent damage to the air

conditioner system due to the lack of lubrica-

tion.

MAX A/C (Quick Air Conditioning) operation:

3. Turn the fan speed control “

desired position.

” dial to the

Push the “MAX A/C” button for quick cooling

and dehumidifying.

4. Turn the temperature control dial to the

desired position.

When the MAX A/C mode is turned on, the air

flow mode indicator will turn off with the air

flow mode fixed at “

Cooling:

Defrosting or defogging:

This mode is used to cool and dehumidify the

air.

”.

This mode directs the air to the defogger

outlets to defrost/defog the windows.

At the same time, the indicator light on the

“A/C” button and the air recirculation mode will

turn on.

1. Push the air recirculation “

indicator light will turn off.)

” button. (The

1. Turn the fan speed control “

desired position.

” dial to the

2. Push the “

will turn on.)

” button. (The indicator light

Push the “MAX A/C” button again to turn off the

MAX A/C mode. When the MAX A/C mode is

turned off, most of the settings will return to

2. Push the air recirculation “

indicator light will turn off.)

” button. (The

Display screen, heater and air conditioner, and audio system 4-31

3. Turn the fan speed control “

desired position.

” dial to the

4. Turn the temperature control dial to the

desired position.

4. Push the “A/C” button. (The indicator light

will turn on.)

5. Turn the temperature control dial to the

desired position between the middle and

the cool (left) position.

A visible mist may be seen coming from the

ventilators in hot, humid conditions as the air is

cooled rapidly. This does not indicate a mal-

function.

Dehumidified heating:

This mode is used to heat and dehumidify the

air.

1. Push the air recirculation “

indicator light will turn off.)

” button. (The

2. Push the “

will turn on.)

” button. (The indicator light

3. Turn the fan speed control “

desired position.

” dial to the

4. Push the “A/C” button. (The indicator light

will turn on.)

5. Turn the temperature control dial to the

desired position between the middle and

the hot (right) position.

Dehumidified defogging:

This mode is used to defog the windows and

dehumidify the air.

1. Push the air recirculation “

indicator light will turn off.)

” button. (The

2. Push the front defogger “ ” button. (The

indicator light on the front defogger “ ”

button will turn on.)

3. Turn the fan speed control “

desired position.

” dial to the

4-32 Display screen, heater and air conditioner, and audio system

Air flow control:

MANUAL AIR CONDITIONER AND HEATER (Type B)

Push the air flow control buttons to select the

air flow outlets. More than one air flow control

button can be selected at a time.

—

Air flows mainly from center and side

ventilators.

—

Air flows mainly from the foot outlet.

Air flows mainly from the front de-

fogger.

MAX defogging/defrosting:

Push the front defogger “

MAX” button to

JVH0827X

turn on the MAX defogging/defrosting mode

and quickly defog/defrost the windshield.

When this mode is turned on, the “A/C”

indicator light will turn on and the air circula-

tion will be fixed at the outside air circulation

1.

Fan speed control “

Front defogger “

“A/C” button

” dial

Fan speed control:

2.

3.

4.

5.

MAX” button

Turn the fan speed control “

to increase the fan speed.

” dial clockwise

” dial counter-

mode. The “

” indicator light will also turn on.

Air recirculation “

” button

Turn the fan speed control “

clockwise to decrease the fan speed.

For the best performance, turn the tempera-

ture control dial to the maximum hot position

and set the fan speed at its maximum.

Rear window defogger “

“Defogger switch” (P.2-60).)

” button (See

Temperature control:

6.

7.

Temperature control dial

Air flow control buttons

Turn the temperature control dial to set the

desired temperature. Turn the dial between the

middle and the right position to select the hot

temperature. Turn the dial between the middle

and the left position to select the cool tem-

perature.

Air intake control:

The air intake control mode will change each

”

For models with Stop/Start System or Idling

Stop System:

time the air recirculation

pushed.

“

button is

The Stop/Start System or Idling Stop System

will not activate when the front defogger is

turned on.

.

When the indicator light is turned on, the air

recirculates inside the vehicle.

.

When the indicator light is turned off, the air

flow is drawn from outside the vehicle.

Controls

A/C (Air Conditioner) operation:

Turning system on/off:

Push the “A/C” button to turn on or off the air

conditioner. When the air conditioner is on, the

“A/C” indicator light on the button illuminates.

To turn on the system, turn the fan speed

control “

” dial out of the OFF position. Turn

the dial counterclockwise to the OFF position

to turn off the system.

Display screen, heater and air conditioner, and audio system 4-33

3. Turn the fan speed control “

desired position.

” dial to the

2. Push the “

will turn on.)

” button. (The indicator light

Heater operation

Heating:

4. Turn the temperature control dial to the

desired position between the middle and

the hot (right) position.

3. Turn the fan speed control “

desired position.

” dial to the

This mode is used to direct heated air from the

foot outlets.

4. Push the “A/C” button. (The indicator light

will turn on.)

1. Push the air recirculation “

” button for

Air conditioner operation

normal heating. (The indicator light will turn

off.)

5. Turn the temperature control dial to the

desired position between the middle and

the hot (right) position.

The air conditioner system should be operated

for approximately 10 minutes at least once a

month. This helps prevent damage to the air

conditioner system due to the lack of lubrica-

tion.

2. Push the “

will turn on.)

” button. (The indicator light

3. Turn the fan speed control “

desired position.

” dial to the

Cooling:

4. Turn the temperature control dial to the

desired position between the middle and

the hot (right) position.

This mode is used to cool and dehumidify the

air.

1. Push the air recirculation “

indicator light will turn off.)

” button. (The

Ventilation:

This mode directs outside air from the side and

center ventilators.

2. Push the “

will turn on.)

” button. (The indicator light

1. Push the air recirculation “

indicator light will turn off.)

” button. (The

3. Turn the fan speed control “

desired position.

” dial to the

2. Push the “

will turn on.)

” button. (The indicator light

4. Push the “A/C” button. (The indicator light

will turn on.)

3. Turn the fan speed control “

desired position.

” dial to the

5. Turn the temperature control dial to the

desired position between the middle and

the cool (left) position.

4. Turn the temperature control dial to the

desired position between the middle and

the hot (right) position.

A visible mist may be seen coming from the

ventilators in hot, humid conditions as the air is

cooled rapidly. This does not indicate a mal-

function.

Heating and defogging:

This mode heats the interior and defogs the

windows.

Dehumidified heating:

1. Push the air recirculation “

indicator light will turn off.)

” button. (The

This mode is used to heat and dehumidify the

air.

2. Push the “

” and “

indicator lights will turn on.)

” buttons. (The

1. Push the air recirculation “

indicator light will turn off.)

” button. (The

4-34 Display screen, heater and air conditioner, and audio system

.

To cancel the separate temperature

setting, push the “DUAL” button (the

indicator light will turn off) and the

driver’s side temperature setting will be

applied to both the driver and passenger

sides.

AUTOMATIC AIR CONDITIONER AND HEATER (Type A)

3. Push and hold either the outside air circu-

lation “ ” button or the air recirculation

” button to switch to the automatic air

“

intake control mode.

When setting the automatic control mode,

both indicator lights will flash twice indicat-

ing that the system is in the automatic

control mode.

JVH0665X

A visible mist may be seen coming from the

ventilators in hot, humid conditions as the air is

cooled rapidly. This does not indicate a mal-

function.

1.

Front defogger “

” button

Turning the system on/off

Push the “ON·OFF” button to turn on and off the

system.

2.

“ON·OFF” button/Temperature control

dial (for left side seat)

3.

4.

5.

6.

“MODE” button

Automatic operation (AUTO)

Dehumidified defrosting/defogging:

Display screen

The AUTO mode may be used year-round as

the system automatically controls the air con-

ditioner to a constant temperature, air flow

distribution and fan speed after the desired

temperature is set manually.

1. Push the front defogger “ ” button (The

indicator light on the front defogger “ ”

button will illuminate).

“A/C” (Air Conditioner) button

“DUAL” button/Temperature control dial

(for right side seat)

2. Turn the temperature control dial to set the

desired temperature.

7.

Rear defogger “

ger switch” (P.2-60).)

” button (See “Defog-

Cooling and dehumidified heating:

.

To quickly remove frost from the outside

surface of the windshield, set the tempera-

ture control and the fan speed to the

maximum levels.

8.

9.

Air recirculation “

” button

1. Push the “AUTO” button (the indicator light

will turn on).

Fan speed control “

10. “AUTO” button

11.

2. Turn the temperature control dial to set the

desired temperature.

.

After the windshield is cleared, push the

“AUTO” button again (the AUTO indicator

light will turn on).

Outside air circulation “

” button

For models with Stop/Start System or Idling

Stop System:

.

When the DUAL indicator light is not

illuminated, pushing the “DUAL” button

(the indicator light will turn on) allows

the user to independently change the

driver and passenger side temperatures

with the corresponding temperature

control dial.

When the front defogger “

” button is

The Stop/Start System or Idling Stop System

will not activate when the front defogger is

turned on.

pushed, the air conditioner will turn on

when the outside air temperature is above

approximately −2°C (28°F) to defog the

windshield. The air recirculation mode will

automatically turn off. The outside air

circulation mode “ ” will be selected to

improve the defogging performance.

Display screen, heater and air conditioner, and audio system 4-35

Do not set the temperature too low when the

front defogger mode is on (the “ ” indicator

light is illuminated), because doing so may fog

up the windshield.

ture control dial changes only the front

passenger’s side temperature. (The DUAL

indicator light will illuminate and “DUAL” will

appear on the display.)

To turn the system off:

To turn off the heater and air conditioner, push

the “ON·OFF” button.

Push the “ON·OFF” button again, the system will

turn on in the mode which was used immedi-

ately before the system was turned off.

.

To cancel the separate temperature

setting, push the “DUAL” button (the indi-

cator light will turn off) and the driver’s side

temperature setting will be applied to both

the driver and passenger sides.

Manual operation

The manual mode can be used to control the

heater and air conditioner to your desired

settings.

Fan speed control:

Air intake control:

Push the fan speed control button (“

or “

speed.

” side

” side) to manually control the fan

.

Push the air recirculation “

” button to

recirculate interior air inside the vehicle.

The indicator light on the button will come

on.

Push the “AUTO” button to change the fan

speed to the automatic mode.

Push the outside air circulation

“

”

button to draw outside air into the pas-

senger compartment. The indicator light on

the button will come on.

Air flow control:

Push the “MODE” button to select the desired

mode:

To control the air intake automatically,

push and hold either the air recirculation

—

Air flows mainly from the center and

side ventilators.

“

” button or the outside air circulation

” button (whichever indicator light is

Air flows mainly from the center and

side ventilators and foot outlets.

illuminated). The indicator lights (both air

recirculation and outside air circulation

buttons) will flash twice, and then the air

intake will switch to automatic control.

When the automatic control is set, the

system automatically alternates between

the outside air circulation “

recirculation “ ” modes. (The indicator

light of the active mode will turn on.)

Air flows mainly from the foot outlet

and partly from the defogger.

Air flows mainly from the front de-

fogger outlets and foot outlets.

” and the air

Temperature control:

Turn the temperature control dial to set the

desired temperature.

NOTE:

.

When the DUAL indicator light is not

illuminated, pushing the “DUAL” button

(the indicator light will turn on) allows the

user to independently change the driver

and passenger side temperatures with the

corresponding temperature control dial.

Even if the system is manually set to the air

recirculation mode, when outside tempera-

ture and coolant temperature are both low,

the system may automatically switch to the

outside air circulation mode.

Also turning the passenger’s side tempera-

4-36 Display screen, heater and air conditioner, and audio system

.

To cancel the separate temperature

setting, push the “DUAL” button (the

indicator light will turn off) and the

driver’s side temperature setting will be

applied to both the driver and passenger

sides.

AUTOMATIC AIR CONDITIONER AND HEATER (Type B)

A visible mist may be seen coming from the

ventilators in hot, humid conditions as the air is

cooled rapidly. This does not indicate a mal-

function.

MAX defrosting/defogging:

Push the front defogger “

MAX” button to

turn on the MAX defogging/defrosting mode

and quickly defog/defrost the windshield.

When this mode is turned on, the fan will be

at its maximum speed, the “A/C” indicator light

will turn on, and the air circulation will be fixed

at the outside air circulation mode.

JVH0828X

1.

“A/C” (Air Conditioner) button

Turning the system on/off

Push the “ON·OFF” button to turn on and off the

system.

2.

3.

4.

5.

6.

Front defogger “

Air recirculation “

Fan speed control “

“ON·OFF” button

MAX” button

” button

Do not set the temperature too low when the

front defogger mode is on (the

Automatic operation (AUTO)

“

MAX”

The AUTO mode may be used year-round as

the system automatically controls the air con-

ditioner to a constant temperature, air flow

distribution and fan speed after the desired

temperature is set manually.

Rear defogger “ ” button (See “Defog-

ger switch” (P.2-60).)

indicator light is illuminated), because doing so

may fog up the windshield.

7.

“AUTO” button/Temperature control dial

(for left side seat)

Manual operation

The manual mode can be used to control the

heater and air conditioner to your desired

settings.

8.

9.

Air flow control buttons

Cooling and dehumidified heating:

“DUAL” button/Temperature control dial

(for right side seat)

1. Push the “AUTO” button (the indicator light

will turn on).

Fan speed control:

For models with Stop/Start System or Idling

Stop System:

2. Turn the temperature control dial to set the

desired temperature.

Push the fan speed control button (“ ” side

or “ ” side) to manually control the fan

speed.

The Stop/Start System or Idling Stop System

will not activate when the front defogger is

turned on.

.

When the DUAL indicator light is not

illuminated, pushing or turning the

“DUAL” button (the indicator light will

turn on) allows the user to indepen-

dently change the driver and passenger

side temperatures with the correspond-

ing temperature control dial.

Display screen, heater and air conditioner, and audio system 4-37

on.

Air flow control:

Air conditioner filter

.

To control the air intake automatically,

push and hold the air recirculation “

Push one of the air flow control buttons to

select or deselect the air flow outlets. More

than one air flow control button can be

selected at a time.

The air conditioner system is equipped with an

air conditioner filter. To make sure the air

conditioner heats, defogs, and ventilates effi-

ciently, replace the filter according the specified

maintenance intervals listed in

maintenance booklet. To replace the filter,

contact a NISSAN dealer.

”

button . The air intake will then be con-

trolled automatically. When automatic con-

trol is set, the system automatically

alternates between the outside air circula-

tion and the air recirculation modes. (The

active mode will be displayed.)

a

separate

—

Air flows mainly from the center and

side ventilators.

Air flows mainly from the foot outlet

and partly from the defogger.

The filter should be replaced if the air flow

decreases significantly or if windows fog up

easily when operating the heater or air condi-

tioner.

NOTE:

Air flows mainly from the front de-

fogger outlets.

Even if the system is manually set to the air

recirculation mode, when outside tempera-

ture and coolant temperature are both low,

the system may automatically switch to the

outside air circulation mode.

Temperature control:

Turn the temperature control dial to set the

desired temperature.

SERVICING AIR CONDITIONER

.

When the DUAL indicator light is not

illuminated, pushing or tuning the “DUAL”

button (the indicator light will turn on)

allows the user to independently change

the driver and passenger side tempera-

tures with the corresponding temperature

control dial.

WARNING:

The air conditioner system contains refriger-

ant under high pressure. To avoid personal

injury, any air conditioner service should be

done only by an experienced technician with

the proper equipment.

.

To cancel the separate temperature

setting, push the “DUAL” button (the indi-

cator light will turn off) and the driver’s side

temperature setting will be applied to both

the driver and passenger sides.

The air conditioner system in your vehicle is

charged with a refrigerant designed with the

environment in mind.

Air intake control:

This refrigerant will not harm the earth’s

ozone layer. However, it may contribute in a

small part to global warming.

.

Push the air recirculation “

” button to

draw outside air into the passenger com-

partment. The indicator light on the button

will turn off.

Special charging equipment and lubricant are

required when servicing your vehicle’s air con-

ditioner. Using improper refrigerants or lubri-

cants will cause severe damage to the air

conditioner system. (See “Air conditioner sys-

tem refrigerant and lubricant” (P.9-7).)

Select the outside air circulation mode for

normal heating or air conditioning opera-

tion.

.

Push the air recirculation “

” button to

recirculate interior air inside the vehicle.

The indicator light on the button will come

A NISSAN dealer will be able to service your

environmentally friendly air conditioner system.

4-38 Display screen, heater and air conditioner, and audio system

AUDIO SYSTEM (if equipped)

For models with NissanConnect Owner’s Man-

ual:

.

Do not expose the CD to direct sunlight.

— 8 cm (3.1 in) discs

CDs that are of poor quality, or are dirty,

scratched, covered with fingerprints, or

that have pin holes may not work properly.

— CDs that are not round

— CDs with a paper label

Refer to NissanConnect Owner’s Manual for the

audio system operations.

— CDs that are warped, scratched or have

unusual edges.

.

The following CDs may not work properly.

— Copy control compact discs (CCCD)

— Recordable compact discs (CD-R)

— Rewritable compact discs (CD-RW)

AUDIO OPERATION PRECAUTIONS

.

This audio system can only play prere-

corded CDs. It has no capabilities to record

or burn CDs.

WARNING:

Do not adjust the audio system while driving

so that full attention may be given to vehicle

operation.

USB (Universal Serial Bus) connection port

WARNING:

Radio

Do not connect, disconnect or operate the

USB device while driving. Doing so can be a

distraction. If distracted you could lose con-

trol of your vehicle and cause an accident or

serious injury.

.

Radio reception is affected by station signal

strength, distance from radio transmitter,

buildings, bridges, mountains and other

external influences. Intermittent changes

in reception quality normally are caused by

these external influences.

CAUTION:

.

Using a cellular phone in or near the vehicle

may influence radio reception quality.

.

Do not force the USB device into the USB

connection port. Inserting the USB device

tilted or up-side-down into the USB con-

nection port may damage the USB con-

nection port. Make sure that the USB

device is connected correctly into the

USB connection port (Some USB devices

Some cellular phones or other devices may

cause interference or a buzzing noise to

come from the audio system speakers.

Storing the device in a different location

may reduce or eliminate the noise.

come with a

sure that the mark is facing the correct

direction before inserting the device.).

mark as a guide. Make

Compact Disc (CD) player

.

During cold weather or rainy days, the

player may malfunction due to the humid-

ity. If this occurs, remove the CD from CD

player and dehumidify or ventilate the

player completely.

.

Do not grab the USB connection port

cover (if equipped) when pulling the USB

device out of the USB connection port.

This could damage the USB connection

port and the USB connection port cover

(if equipped).

SAA0480

.

The player may skip while driving on rough

roads.

.

Do not use the following CDs as they may

cause the CD player to malfunction.

The CD player sometimes may not function

when the passenger compartment tem-

perature is extremely high. Lower the

temperature before use.

Do not leave the USB cable in a place

where it can be pulled unintentionally.

Pulling the cable may damage the USB

Display screen, heater and air conditioner, and audio system 4-39

connection port.

performance.

Bluetooth® Audio player (if equipped)

The vehicle is not equipped with a USB device.

USB devices should be purchased separately as

necessary.

iPad, iPhone, iPod, iPod classic, iPod nano, iPod

shuffle, and iPod touch are trademarks of Apple

Inc., registered in the U.S. and other countries.

Lightning is a trademark of Apple Inc.

.

Some Bluetooth® audio devices may not be

used with this system. For detailed infor-

mation about Bluetooth® audio devices

that are available for use with this system,

contact a NISSAN dealer.

This system cannot be used to format USB

devices. To format a USB device, use a personal

computer.

.

NISSAN audio system supports only acces-

sories that Apple has certified and that

come with the “Made for iPod/iPhone/iPad”

logo.

.

Before using a Bluetooth® audio system,

the initial registration process for the audio

device is necessary.

In some states/area, the USB device for the

front seats plays only sound without images for

regulatory reasons, even when the vehicle is

parked.

Improperly plugging in the iPod may cause

a checkmark to be displayed on and off

(flickering). Always make sure that the iPod

is connected properly.

Operation of the Bluetooth® audio system

may vary depending on the audio device

that is connected. Confirm the operation

procedure before use.

This system supports various USB memory

devices, USB hard drives and iPod players.

Some USB devices may not be supported by

this system.

An iPod nano (1st Generation) may remain

in fast forward or rewind mode if it is

connected during a seek operation. In this

case, please manually reset the iPod.

.

The playback of Bluetooth® audio will be

paused under the following conditions. The

playback will be resumed after the follow-

ing conditions are completed.

.

Partitioned USB devices may not be played

correctly.

.

An iPod nano (2nd Generation) will continue

to fast-forward or rewind if it is discon-

nected during a seek operation.

— while using a hands-free phone

.

Some characters used in other languages

(Chinese, Japanese, etc.) are not displayed

properly on display. Using English language

characters with a USB device is recom-

mended.

— while checking a connection with a cell

phone

An incorrect song title may appear when

the Play Mode is changed while using an

iPod nano (2nd Generation)

.

The in-vehicle antenna for Bluetooth® com-

munication is built in the system. Do not

place the Bluetooth® audio device in an

area surrounded by metal, far away from

the system or in a narrow space where the

device closely contacts the body or the

seat. Otherwise, sound degradation or

connection interference may occur.

General notes for USB use:

.

Audiobooks may not play in the same order

as they appear on an iPod.

Refer to your device manufacturer’s owner

information regarding the proper use and care

of the device.

Large video files cause slow responses in

an iPod. The vehicle center display may

momentarily black out, but will soon re-

cover.

Notes for iPod use:

“Made for iPod”, “Made for iPhone”, and “Made

for iPad” mean that an electronic accessory has

been designed to connect specifically to iPod,

iPhone, or iPad, respectively, and has been

certified by the developer to meet Apple

performance standards.

.

While a Bluetooth® audio device is con-

nected through the Bluetooth® wireless

connection, the battery power of the device

may discharge quicker than usual.

.

If an iPod automatically selects large video

files while in the shuffle mode, the vehicle

center display may momentarily black out,

but will soon recover.

This system is compatible with the Blue-

tooth® AV profile (A2DP and AVRCP).

Apple is not responsible for the operation of

this device or its compliance with safety and

regulatory standards.

Please note that the use of this accessory with

iPod, iPhone, or iPad may affect wireless

4-40 Display screen, heater and air conditioner, and audio system

Bluetooth® is a trademark

owned by Bluetooth SIG,

Inc. and licensed to Visteon

Corporation and Robert

Bosch GmbH.

.

Sampling frequency — Sampling frequency

is the rate at which the samples of a signal

are converted from analog to digital (A/D

conversion) per second.

Playback order:

Multisession — Multisession is one of the

methods for writing data to media. Writing

data once to the media is called a single

session, and writing more than once is

called a multisession.

Compact Disc (CD)/USB device with MP3/WMA

Terms:

.

MP3 — MP3 is short for Moving Pictures

Experts Group Audio Layer 3. MP3 is the

most well known compressed digital audio

file format. This format allows for near “CD

quality” sound, but at a fraction of the size

of normal audio files. MP3 conversion of an

audio track from CD can reduce the file size

by approximately 10:1 ratio (Sampling: 44.1

kHz, Bit rate: 128 kbps) with virtually no

perceptible loss in quality. MP3 compres-

sion removes the redundant and irrelevant

parts of a sound signal that the human ear

doesn’t hear.

.

ID3/WMA Tag — The ID3/WMA tag is the

part of the encoded MP3 or WMA file that

contains information about the digital mu-

sic file such as song title, artist, album title,

encoding bit rate, track time duration, etc.

ID3 tag information is displayed on the

Album/Artist/Track title line on the display.

* Windows® and Windows Media® are registered

trademarks and/or trademarks of Microsoft

Corporation in the United States of America

and/or other countries.

.

WMA — Windows Media Audio (WMA) is a

compressed audio format created by Mi-

crosoft as an alternative to MP3. The WMA

codec offers greater file compression than

the MP3 codec, enabling storage of more

digital audio tracks in the same amount of

space when compared to MP3s at the

same level of quality.

SAA2494

Music playback order of the CD with MP3/WMA

is as illustrated above.

This product is protected by certain intel-

lectual property rights of Microsoft Cor-

poration and third parties. Use or

distribution of such technology outside of

this product is prohibited without a license

from Microsoft or an authorized Microsoft

subsidiary and third parties.

.

The folder names of folders not containing

MP3/WMA files are not shown in the dis-

play.

.

If there is a file in the top level of the disc,

“Root Folder” is displayed.

The playback order is the order in which

the files were written by the writing soft-

ware, so the files might not play in the

desired order.

.

Bit rate — Bit rate denotes the number of

bits per second used by a digital music files.

The size and quality of a compressed digital

audio file is determined by the bit rate used

when encoding the file.

Display screen, heater and air conditioner, and audio system 4-41

Specification chart (for CD player/Radio Type A):

CD, CD-R, CD-RW, USB2.0

Supported media

ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet

* ISO9660 Level 3 (packet writing) is not supported.

* Files saved using the Live File System Component (on a Windows Vista-based

computer) are not supported.

Supported file systems

MPEG1, MPEG2, MPEG2.5

Version

Sampling frequency

8 kHz - 48 kHz

MP3

32 kbps - 320 kbps, VBR*4

Bit rate

Supported versions*1

WMA7, WMA8, WMA9 (except WMA9 Pro, WMA9 Lossless, WMA9 Voice)

32 kHz - 48 kHz

Version

WMA*3

Sampling frequency

Bit rate

32 kbps - 192 kbps, VBR*4

ID3 tag VER1.0, VER1.1, VER2.2, VER2.3, VER2.4 (MP3 only)

WMA tag (WMA only)

Tag information (Song title and Artist name)

Folder levels

Folder levels: 8, Folders:255 (including root folder), files: 512

01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE

(UTF-16 Non-BOM Big Endian), 05: UNICODE (UTF-8), 06: UNICODE (Non-UTF-16

BOM Little Endian)

Displayable character codes*2

*1

Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.

Available codes depend on what kind of media, versions and information are going to be displayed.

Protected WMA files (DRM) cannot be played.

*2

*3

*4 When VBR files are played, the playback time may not be displayed correctly. WMA7 and WMA8 are not applied to VBR.

4-42 Display screen, heater and air conditioner, and audio system

Specification chart (for CD player/Radio Type B and C):

CD, CD-R, CD-RW, USB2.0

Supported media

CD, CD-R, CD-RW: ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet

* ISO9660 Level 3 (packet writing) is not supported.

* Files saved using the Live File System component (on a Windows Vista-based

computer) are not supported.

Supported file systems

USB memory: FAT16, FAT32

MPEG1 Audio Layer 3

Version

32 kHz - 48 kHz

MP3

Sampling frequency

Bit rate

32 kbps - 320 kbps, VBR*4

Supported versions*1

WMA7, WMA8, WMA9

Version

32 kHz - 48 kHz

WMA*2

Sampling frequency

Bit rate

32 kbps - 192 kbps, VBR4, 32 kbps - 320 kbps (WMA9 only)

ID3 tag VER1.0, VER1.1, VER2.2, VER2.3, VER2.4 (MP3 only)

WMA tag (WMA only)

Tag information (Song title and Artist name)

CD, CD-R, CD-RW

USB

Folder levels: 8, Folders: 255, Files: 999 (Max. 255 files for one folder)

Folder levels

Folder levels: 8, Folders 255, Files: 2500 (Max. 255 files for one folder)

Memory size: 4GB

01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE (UTF-

16 Non-BOM Big Endian), 05: UNICODE (UTF-8)

Displayable character codes*3

*1

Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.

Protected WMA files (DRM) cannot be played.

*2

*3

Available codes depend on what kind of media, versions and information are going to be displayed.

*4 When VBR files are played, the playback time may not be displayed correctly.

Display screen, heater and air conditioner, and audio system 4-43

Specification chart (for CD player/Radio Type D):

CD, CD-R, CD-RW, USB2.0

Supported media

ISO9660 LEVEL 1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet

*ISO9660 LEVEL 3 (packet writing) is not supported.

Supported file systems

MPEG1, MPEG2, MPEG2.5

Version

8 kHz - 48 kHz

MP3

Sampling frequency

Bit rate

8 kbps - 320 kbps, VBR

Supported

versions*1

WMA7, WMA8, WMA9

Version

32 kHz - 48 kHz

WMA*2 Sampling frequency

Bit rate

48 kbps - 192 kbps, VBR

ID3 tag VER1.0, VER1.1, VER2.2, VER2.3 (MP3 only)

Tag information

Folder levels

Folder levels: 8, Max folders: 255 (including root folder), Files: 512 (Max. 255 files for one folder)

01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE (UTF-16 Non-BOM Big

Endian), 05: UNICODE (UTF-8), 06: UNICODE (Non-UTF-16 BOM Little Endian)

Displayable character codes*2

*1

Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.

Available codes depend on what kind of media, versions and information are going to be displayed.

*2

4-44 Display screen, heater and air conditioner, and audio system

Troubleshooting guide:

Cause and Countermeasure

Symptom

Check if the disc was inserted correctly.

Check if the disc is scratched or dirty.

Check if there is condensation inside the player, and if there is, wait until the condensation is gone (about 1 hour)

before using the player.

If there is a temperature increase error, the CD player will play correctly after it returns to the normal temperature.

If there is a mixture of music CD files (CD-DA data) and MP3/WMA files on a CD, only the music CD files (CD-DA data)

will be played.

Cannot play

Files with extensions other than “.MP3”, “.WMA”, “.mp3” or “.wma” cannot be played. In addition, the character codes

and number of characters for folder names and file names should be in compliance with the specifications.

Check if the disc or the file is generated in an irregular format. This may occur depending on the variation or the

setting of MP3/WMA writing applications or other text editing applications.

Check if the finalization process, such as session close and disc close, is done for the disc.

Check if the disc is protected by copyright.

Check if the disc is scratched or dirty or if the bit rate may be too low.

Poor sound quality

If there are many folder or file levels on the MP3/WMA disc or if it is a multisession disc, some time may be required

before the music starts playing.

It takes a relatively long time

before the music starts playing.

The writing software and hardware combination might not match, or the writing speed, writing depth, writing

width, etc., might not match the specifications. Try using the slowest writing speed.

Music cuts off or skips

Skipping may occur with large quantities of data, such as for high bit rate data.

Skipping with high bit rate files

When a non-MP3/WMA file has been given an extension of “.MP3”, “.WMA”, “.mp3” or “.wma”, or when play is prohibited

by copyright protection, the player will skip to the next song.

Move immediately to the next

song when playing.

The playback order is the order in which the files were written by the writing software, so the files might not play in

the desired order.

The songs do not play back in

the desired order.

Display screen, heater and air conditioner, and audio system 4-45

17. MENU/ENTER dial

FM-AM RADIO WITH COMPACT DISC (CD) PLAYER (Type A)

JVH0830X

Models with TA button

1.

DISP (Display) button

RADIO button

9.

10. MEDIA button

11. Phone button

CD eject button

2.

3.

4.

5.

6.

7.

8.

Day/Night button

TA button

12. Power/VOL (Volume) dial

13. RPT (repeat) button

14. MIX button

Seek/track (rewind) button

Seek/track (fast forward) button

SETUP button

15. Station memory buttons

16. A-Z button

Back button

4-46 Display screen, heater and air conditioner, and audio system

Audio main operation

The audio system operates when the ignition

switch is placed in the “ACC” or “ON” position.

Power/VOL dial:

Power ON/OFF:

To turn on the audio system, push the Power/

VOL dial.

The system will turn on in the mode, which was

used immediately before the system was

turned off.

To turn off the audio system, push the Power/

VOL dial.

Volume control:

To control the volume, turn the Power/VOL dial.

Turn the Power/VOL dial clockwise to make the

sound louder.

Turn the Power/VOL dial counterclockwise to

make the sound quieter.

SETUP button:

To configure “Audio”, “Clock”, “Radio”, or “Lan-

guage” settings, perform the following proce-

dure:

JVH0831X

Models without TA button

10. MEDIA button

11. Phone button

1. Push the SETUP button.

1.

DISP (Display) button

RADIO button

2. Turn the MENU/ENTER dial to select the

setting item from the following:

2.

3.

4.

5.

6.

7.

8.

9.

Day/Night button

MIX button

12. Power/VOL (Volume) dial

13. RPT (repeat) button

14. Station memory buttons

15. A-Z button

Audio � Clock � Radio � Language

3. Push the MENU/ENTER dial.

Seek/track (rewind) button

Seek/track (fast forward) button

SETUP button

After the desired levels have been set, push the

Back button repeatedly or push the SETUP

button.

16. MENU/ENTER dial

Back button

CD eject button

Display screen, heater and air conditioner, and audio system 4-47

Audio adjustments:

.

Bass Boost menu

Radio setting:

Turn on or off the Bass Boost feature which

emphasizes the lower audio frequencies.

Turn the MENU/ENTER dial to select the “Audio”

and push the MENU/ENTER dial.

Turn the MENU/ENTER dial to select the “Radio”

and push the MENU/ENTER dial.

Audio Default menu

Turn the MENU/ENTER dial to select the

preferred audio setting item and then push

the MENU/ENTER dial.

Turn the MENU/ENTER dial to select the

preferred radio setting item and then push

the MENU/ENTER dial.

The audio unit has a saved preset settings

as a factory default. Select “Yes” to change

all settings back to the factory preset

settings. Select “No” to exit the menu

keeping the current settings.

Turn the MENU/ENTER dial clockwise or coun-

terclockwise to adjust the following items and

push MENU/ENTER dial to confirm.

The items that can be set for Radio are shown

below:

.

TA (if equipped)

Clock setting:

The items that can be set for “Audio” are shown

below:

Set the Traffic Information to on or off.

When turned on, Traffic Information will

interrupt the currently playing music and

inform the driver of any traffic information

when it is received.

Turn the MENU/ENTER dial to select the “Clock”

and push the MENU/ENTER dial.

.

Sound menu

Turn the MENU/ENTER dial to select the

preferred clock setting item and then push

the MENU/ENTER dial.

Bass:

Use this control to enhance or attenuate

bass response sound.

.

DAB Interrupts (if equipped)

The items that can be set for “Clock” are shown

below:

DAB interruption category can be selected

from the list for setting. When the selected

information is received, it will inform the

driver of the information, interrupting the

music playing at the time.

Treble:

Use this control to enhance or attenuate

the treble.

.

Set Time

Select “Set Time” then adjust the clock as

follows:

Bal. (Balance) :

Use this control to adjust the balance of the

volume between the left and right speak-

ers.

.

Ref. FM List

The hour display will start flashing. Turn the

MENU/ENTER dial to adjust the hour and

push the MENU/ENTER dial. The minute

display will start flashing. Turn the MENU/

ENTER dial to adjust the minute and push

the MENU/ENTER dial to finish the clock

adjustment.

The list of FM stations that can be received

will be updated.

Fade:

Ref. DAB List (if equipped)

Use this control to adjust the balance of the

volume between the front and the rear

speakers.

The list of DAB stations that can be

received will be updated. DAB List is up-

dated automatically when not in DAB

source.

.

AUX In menu

.

ON/OFF

Use this control to adjust the volume out-

put from the auxiliary source.

The clock display can be turned on and off.

When “ON” is selected, the clock will be

displayed. (The clock will keep being dis-

played even after the power of the audio

unit is turned off). When “OFF” is selected,

the clock will not be displayed.

.

DAB EPG (if equipped)

Electronic Program Guide (EPG) for DAB is

designed to offer similar features for the

user as television EPG but for radio and

associated data services:

Speed Vol. (Volume) menu

This mode controls the volume output

from the speakers automatically in relation

to vehicle speed.

— display of schedules with programs and

events

Format

Adjusting the setting to 0 (zero) turns off

the speed volume feature.

Switch the clock display between 24-hour

mode and 12-hour clock mode.

— searching through current and future

programs lists

etc.

4-48 Display screen, heater and air conditioner, and audio system

.

Intellitext (if equipped)

For models with DAB

Radio operation

Intellitext messages are the special format

of DL (Dynamic Label) messages that pro-

vide data like sport or news.

FM 1 ? FM 2 ? DAB 1 ? DAB 2 ? AM ? FM 1

Frequency range and step change:

Pushing and holding the RADIO button will

update the station lists.

To change the frequency range and step

specification of the radio, perform the following

operations.

Language setting:

For models without DAB

Turn the MENU/ENTER dial to select the

“Language” and push the MENU/ENTER dial.

1. Turn on the audio system.

FM 1 ? FM 2 ? AM ? FM 1

2. Push the RADIO button and select AM or FM

mode.

Pushing and holding the RADIO button will

update the station lists.

Select the appropriate language and push the

MENU/ENTER dial. Upon completion, the screen

will automatically adapt the language setting.

3. Push and hold the SETUP button for more

than 3 seconds.

Seek/track buttons:

4. After 3 seconds, keep holding the SETUP

button and turn the MENU/ENTER dial

counterclockwise until you hear 3 clicks,

clockwise until you hear 3 clicks, and then

counterclockwise until you hear 3 clicks.

Day/Night button:

Push

change the frequency.

or

button briefly to manually

Push the Day/Night button to switch the dis-

play brightness between the daytime and

nighttime modes.

To adjust the broadcasting station frequency

automatically, push and hold the

button. When the system detects

casting station, it will stop at the station.

or

a

broad-

The switches on the audio unit will also

illuminate in the nighttime mode.

5. Turn the MENU/ENTER dial until “Region” is

highlighted, and push the MENU/ENTER

dial.

1

2

3

4

5

6

&&&&&&Station memory buttons:

Phone button:

6. Select an appropriate region.

During radio reception, pushing the station

memory button for less than 2 seconds will

select the stored radio station.

7. To apply the setting, turn off the audio

system, place the ignition switch in the

“OFF” position, and then place the ignition

switch back in the “ON” position.

For operation on how to use phone button, see

“Bluetooth® Hands-Free Phone System (for

type A audio)” (P.4-75).

For models with DAB

The audio system can store up to 12 FM station

frequencies (6 in each of FM 1 and FM 2), 6 AM

station frequencies and 12 DAB station fre-

quencies (6 in each of DAB 1 and DAB 2).

MEDIA button:

RADIO button:

Push the MEDIA button to play a compatible

device when it is connected.

When the RADIO button is pushed while the

audio system is off, the audio system will turn

on and the radio will turn on.

For models without DAB

Each time the MEDIA button is pushed, the

audio source will change as follows:

The audio system can store up to 12 FM station

frequencies (6 in each of FM 1 and FM 2) and 6

AM station frequencies.

When the RADIO button is pushed while an-

other audio source is playing, the other audio

source will turn off and the radio will turn on.

CD ? USB (iPod) ? Bluetooth ? AUX ? CD

Any source that is not available will be skipped.

To store the station frequency manually:

To change the radio bands, push the RADIO

button until the desired band appears.

1. Tune to the desired broadcasting station

frequency.

1

2. Push and hold a station memory button &

6

- &until a beep sounds.

Display screen, heater and air conditioner, and audio system 4-49

3. The station indicator will display, indicating

that the memory is stored properly.

TA (Traffic announcement) button (if

equipped):

CD player operation

Loading:

4. Perform steps 1 - 3 for all other memory

buttons.

The TA functions are available in the mode of

Radio (FM) or any other audio source.

Insert a CD into the slot with the label side

facing up. The CD will be guided automatically

into the slot and will start playing. After loading

the CD, the number of tracks and the playtime

will appear on the display.

If the battery cable is disconnected, or if the

audio fuse blows, the station memory will be

erased. In the event of this, reset the desired

stations.

.

Pushing the TA button selects the TA mode.

The TA indicator is displayed while TA mode

is on.

.

When TA button is pushed again. The mode

will be switched off and the TA indicator will

disappear from the display.

CAUTION:

Radio Data System (RDS) operation (if

equipped):

Do not force the CD into the slot. This could

damage the player.

Traffic announcement interrupt function

The RDS is a system through which encoded

digital information is transmitted by FM radio

stations in addition to the normal FM radio

broadcasting. The RDS provides information

services such as station name, traffic informa-

tion, or news.

When a traffic announcement is received, the

announcement is tuned in and the display

shows a notification message with the radio

station name.

NOTE:

.

The CD player accepts normal audio CDs

or CDs containing MP3/WMA files.

Once the traffic announcement has finished,

the unit returns to the source that was active

before the traffic announcement started.

.

The audio unit will automatically detect if

a CD containing MP3/WMA files is in-

serted, and “MP3CD” will be indicated.

NOTE:

In some countries or regions, some of these

services may not be available.

If TA button is pushed during a traffic an-

nouncement, the traffic announcement inter-

rupt mode is cancelled. The TA mode returns to

the standby mode and the audio unit returns

to the previous source.

.

An error notification message will be

displayed when inserting an incompati-

ble disc type (e.g. DVD), or if the player

cannot read the CD. Eject the disc and

insert another disc.

Alternative Frequency (AF) mode

The AF mode operates in the FM (radio) mode.

.

The AF mode operates in the FM (radio),

AUX or CD mode (if FM was previously

selected in the radio mode).

Digital Audio Broadcast (if equipped):

MEDIA button:

DAB (Digital Audio Broadcast) is a standard for

digital radio broadcast.

The AF function compares signal strengths

and selects the station with the optimum

reception conditions for the currently

tuned-in station.

To change to the CD mode, push the MEDIA

button with a CD inserted until the CD mode is

selected.

Various information selected by the driver

(Travel, Warning, News, Weather, Sport, etc.)

can be received and will be provided to the

driver.

List view:

RDS functions

While the track is being played, push the MENU/

ENTER dial to display the available tracks in a

listed view mode. To select a track from the list,

or a track to start listening to, turn the MENU/

ENTER dial then push MENU/ENTER dial.

When an RDS station is tuned in with seek or

manual tuning, the RDS data is received and

the Programme Service (PS) name is displayed.

DAB Interrupts

When set in the DAB Interrupts setting, the

received information will appear on the display.

4-50 Display screen, heater and air conditioner, and audio system

If the current selected folder contains sub

folders, push the MENU/ENTER dial, new

screen with list of sub folders will be

displayed. Turn the MENU/ENTER dial for the

sub folder then push the MENU/ENTER dial to

select. Select the root folder item when songs

are recorded additionally in the root folder.

Quick search:

CD eject button:

a

In the list view mode, a quick search can be

performed to find a track from the list. Push the

A-Z button, turn the MENU/ENTER dial to the

first alphabetic letter of the song title and then

push the MENU/ENTER dial. When found, a list

of the available songs will be displayed. Select,

and push the MENU/ENTER dial to play the

preferred track.

a

When the CD eject button is pushed while the

ignition switch is placed in the “ACC” or “ON”

position, the CD will be ejected.

If a CD is ejected by pushing the CD eject

button, and it is not taken out from the loading

slot within 20 seconds, the CD will automati-

cally be reloaded to the slot to protect the CD.

To return to the previous folder screen, push

the Back button.

USB device player operation

RPT button:

Seek/track button:

USB device main operation:

Push the RPT button and the current track will

be played continuously.

Push and hold the Seek/track button to fast

forward or rewind through the track. When the

button is released, the track will play at normal

playing speed.

The USB connection port is located on the

lower part of the instrument panel. See “USB

(Universal Serial Bus) connection port” (P.4-72).

Connect a USB memory device into the USB

connection port. The USB memory device will

be activated automatically.

MIX button:

Track up/down:

Push the MIX button and all the tracks will be

played in a random order.

Pushing the Seek/track button once, the track

will skip forward to the next track or backward

to the beginning of the current track. Push the

Seek/track button more than once to skip

through the tracks.

Refer to your device manufacturer’s owner

information regarding the proper use and care

of the device.

DISP button:

While a CD with recorded music information

tags (CD-text/ID3-text tags) is being played, the

title of the played track is displayed when

available.

If the system has been turned off while the USB

memory device was playing, pushing the

Power/VOL dial will start the USB memory

device.

Folder browsing:

If the recorded media contains folders with

music files, pushing the Seek/track button will

play the tracks of each folder in sequence.

When the DISP button is pushed repeatedly,

further information about the track can be

displayed along with the track title as follows:

The following operations are identical to the

audio main operation of the Compact Disc (CD)

operation. For details, see “CD player operation”

(P.4-50).

To select a preferred folder:

1. Push the MENU/ENTER dial to display a list

of tracks in the current folder.

Track time ? Artist name ? Album title ?

Track time

.

List view

2. Push the Back button.

Track details:

Quick search

3. Turn the MENU/ENTER dial to select the

preferred folder.

Pushing and holding the DISP button will turn

the display into a detailed overview. Push the

Back button to return to the previous screen.

(Seek/track)

MIX (Random play)

RPT (Repeat track)

Folder browsing

4. Push the MENU/ENTER dial to access the

folder. Push the MENU/ENTER dial again to

start playing the first track or to turn the

MENU/ENTER dial, and push the MENU/

ENTER dial to select another track.

Display screen, heater and air conditioner, and audio system 4-51

.

iPod Nano G5 (Firmware version 1.0.1 -)

iPod Nano G6 (Firmware version 1.0 -)

iPod Nano G7 (Firmware version 1.0.0 -)

iPod Touch G4 (iOS 4.1 -)

iPod Touch G5 (iOS 6.0.0 -)

iPhone 3G (iOS 2.1 -)

.

Artists

Albums

Tracks

More

MEDIA button:

To operate the USB memory device, push the

MEDIA button repeatedly until the USB mode is

selected.

For further information about each item, see

the iPod owner’s manual.

DISP button:

iPhone 3GS (iOS 3.0 -)

The following operations are identical to the

audio main operation of the Compact Disc (CD)

operation. For details, see “CD player operation”

(P.4-50).

iPhone 4 (iOS 4.0 -)

While a track with recorded music information

tags (ID3-tags) is being played, the title of the

played track is displayed.

iPhone 4S (iOS 4.0 -)

iPhone 5 (iOS 6.0.0 -)

.

List view

iPhone 5c (iOS 6.0.0 -)

When the DISP button is pushed repeatedly,

further information about the track can be

displayed along with the track title as follows:

Quick search

iPhone 5s (iOS 6.0.0 -)

(Seek/track)

iPhone 6 (iOS 8.0.0 -)

MIX (Random play)

RPT (Repeat track)

Track time ? Artist ? Album ? Track time

iPhone 6 Plus (iOS 8.0.0 -)

iPhone 6s (iOS 9.0.0 -)

Track details:

iPhone 6s Plus (iOS 9.0.0 -)

Pushing and holding the DISP button will turn

the display into a detailed overview. Push the

Back button to return to the display for the

main display mode.

DISP button:

NOTE:

While a track with recorded music information

tags (ID3-tags) is being played, the title of the

played track is displayed.

This audio system do not support iPad

charging.

iPod player operation

When the DISP button is pushed repeatedly,

further information about the track can be

displayed along with the track title as follows:

MEDIA button:

Connecting iPod:

To operate the iPod, push the MEDIA button

repeatedly until the USB (iPod) mode is selected

and then push the MENU/ENTER dial.

The USB connection port is located on the

lower part of the instrument panel. See “USB

(Universal Serial Bus) connection port” (P.4-72).

Track time ? Artist ? Album ? Track time

Track details:

When the iPod is connected to the vehicle, the

iPod music library can only be operated by the

vehicle audio controls.

iPod main operation:

Pushing and holding the DISP button will turn

the display into a detailed overview. To return

to the main display, push the Back button.

Interface:

The interface for iPod operation shown on the

audio system display is similar to the iPod

interface. Use the MENU/ENTER dial to play a

track on the iPod.

Compatibility:

The system unit shall be compatible with all

devices (past and future) supporting Apple

Accessory Protocol on USB link.

The following items can be chosen from the

menu list screen.

It includes (and not limited to):

.

Playlists

.

iPod Classic G6 (Firmware version 1.0.0 -)

4-52 Display screen, heater and air conditioner, and audio system

the track will be skipped forward to the next

track or backward to the beginning of the

Bluetooth® audio player operation

Regulatory information:

current played track. Push

(Cue) or

(Review) button more than once to skip

through the tracks.

Bluetooth® is a trademark

owned by Bluetooth SIG, Inc.

and licensed to Visteon Cor-

poration.

DISP button:

If the song contains music information tags

(ID3– tags), the title of the played song will be

displayed. If tags are not provided then the

display will not show any messages.

NOTE:

The audio system only supports Bluetooth®

devices with AVRCP (Audio Video Remote

Control Profile) version 1.3, or 1.0 or earlier.

When the DISP button is pushed repeatedly

further information about the song can be

displayed along with the song title.

Bluetooth® audio player main operation:

To play Bluetooth® audio, the Bluetooth® audio

device needs to be paired to the in-vehicle

system. For the pairing operation, see “Pairing

device” (P.4-76).

A long push on DISP will turn the display into a

detailed overview which after a few seconds

returns to the main display; or push DISP briefly.

When an Apple device is connected via the USB

connection port and Bluetooth®, the device will

AUX device player operation

The AUX jack is located on lower part of the

instrument panel. (See “AUX (auxiliary) input

jack” (P.4-72).) The AUX input jack accepts any

standard analog audio input such as from a

portable cassette tape/CD player, MP3 player

or laptop computer.

be recognized as

a

Bluetooth® device. The

battery of the Apple device is charged while

the cable is connected to the USB connection

port.

MEDIA button:

NISSAN strongly recommends using a stereo

mini plug cable when connecting your music

device to the audio system. Music may not play

properly when a monaural cable is used.

To operate the Bluetooth® audio streaming,

push MEDIA button repeatedly until “BT Audio”

is shown.

Fast Forward (Cue), Fast Reverse

(Review) buttons:

MEDIA button:

To switch to the AUX mode, push the MEDIA

button repeatedly until the AUX mode is

selected.

When

(Cue) or

(Review) button is

pushed continuously, the track will be played

at high speed. When the button is released, the

track will be played at normal playing speed.

Track up/down buttons:

Pushing

(Cue) or

(Review) button once,

Display screen, heater and air conditioner, and audio system 4-53

17. ENTER/SETTING button

FM-AM RADIO WITH COMPACT DISC (CD) PLAYER (Type B)

JVH0673X

1.

MEDIA button

9.

10. SEEK·TRACK (fast forward) button

11. BACK button

SCAN tuning button

2.

3.

4.

5.

6.

7.

8.

FM·AM button

CD eject button

CD button

12. Power/VOL (volume) dial

13. RPT (repeat) button

14. RDM (random) button

DISP (display) button

Color display

Apps button

15. Radio station preset select buttons

16. TUNE·FOLDER dial

SEEK·TRACK (rewind) button

4-54 Display screen, heater and air conditioner, and audio system

the TUNE·FOLDER dial and then push the

ENTER/SETTING button. Turn the TUNE·-

FOLDER dial to adjust the brightness and

contrast of the screen to the preferred

level.

.

RDS Display (if equipped)

Audio main operation

The audio system operates when the ignition

switch is placed in the “ACC” or “ON” position.

RDS (radio data system) information can be

shown on the display. Select “RDS Display”

using the TUNE·FOLDER dial and then push

the ENTER/SETTING button. You can toggle

between ON and OFF using the TUNE·-

FOLDER dial.

Head unit:

.

Clock Adjust

The auto loudness circuit enhances the low

and high frequency ranges automatically in

both radio reception and CD playback.

Adjust the clock according to the following

procedure.

.

Speed Sensitive Vol.

To change the Speed Sensitive Volume

(Speed Sens Vol.) level from off (0) to 5,

turn the TUNE·FOLDER dial.

Power/VOL dial:

Push Power/VOL dial to turn on and off the

audio system.

AUX Vol.

Turn the Power/VOL dial to adjust the volume.

Controls the volume level of incoming

sound when an auxiliary device is con-

nected to the system. Choose a setting

between 1 and 3 or choose 0 to disable the

feature entirely.

Audio settings:

The settings screen will appear when pushing

the ENTER/SETTING button.

The following items are available in the settings

screen.

.

Language Select

The language settings can be changed.

JVH0653X

.

Bluetooth (if equipped)

Select “Language Select” using the TUNE·-

FOLDER dial and then push the ENTER/

SETTING button. Use the TUNE·FOLDER dial

to select the preferred language.

It is possible to set the Bluetooth® settings.

For details of the Bluetooth® settings, see

“Bluetooth® audio player operation” (P.4-

58).

1) Select “Clock Adjust” using the TUNE·-

FOLDER dial

ENTER/SETTING button

2) Adjust the hour with the TUNE·FOLDER

dial and then push the ENTER/

SETTING button

3) Adjust the minute with the TUNE·-

FOLDER dial and then push the

and then push the

.

Bass, Treble, Balance and Fade

DISP button:

Controls the sound of the audio system.

Balance adjusts the sound between the left

and right speakers. Fade adjusts the sound

between the front and rear speakers.

.

Display of the screen can be turned off without

disrupting the music by pushing the DISP

button. To turn the screen back on, either push

the DISP button once more or push the FM·AM,

CD, Apps or the MEDIA button.

ENTER/SETTING button

24 hour clock is not available.

On-Screen Clock

.

Select the “Bass”, “Treble”, “Balance” or

“Fade” using the TUNE·FOLDER dial and

then push the ENTER/SETTING button.

Turn the TUNE·FOLDER dial to adjust the

Bass, Treble, balance and Fade of the

screen to the preferred level.

.

When this item is turned on, a clock is

always displayed in the upper right corner

of the screen.

MEDIA button:

Pushing the MEDIA button will switch the audio

source as follows:

Select the “On-Screen Clock” using the

TUNE·FOLDER dial and then push the

ENTER/SETTING button. You can toggle

between ON and OFF using the TUNE·-

FOLDER dial.

.

Brightness and Contrast

USB/iPod? Bluetooth (if equipped) ? AUX ?

USB/iPod

Adjust the brightness and contrast of the

screen.

Select the “brightness” or “contrast” using

Display screen, heater and air conditioner, and audio system 4-55

If the radio is already operating, it will auto-

matically turn off and the CD will play.

Apps button:

SCAN tuning:

If the system has been turned off while the CD

was playing, pushing the Power/VOL dial will

start the CD.

The Apps button launches the Smartphone

Integration mode. See “NissanConnect App

smartphone integration” (P.4-71).

Push the SCAN tuning button to tune from low

to high frequencies and stop at each broad-

casting station for

5

seconds. Pushing the

button again during this 5 seconds period will

stop SCAN tuning and the radio will remain

tuned to that station.

Radio operation

PLAY:

When the CD button is pushed with the system

off and the CD loaded, the system will turn on

and the CD will start to play.

FM·AM button:

If the SCAN tuning button is not pushed within

5 seconds, SCAN tuning moves to the next

station.

Push the FM·AM button to change the band as

follows:

When the CD button is pushed with the CD

loaded and the radio playing, the radio will

automatically be turned off and the CD will

start to play.

to

Station memory operations:

AM ? FM1 ? FM2? AM

12 stations can be set for the FM band (6 each

for FM1 and FM2) and 6 stations can be set for

the AM band.

TUNE (Tuning):

Turn the radio TUNE·FOLDER dial for manual

tuning.

1. Choose the radio band using the FM·AM

button.

SEEK/TRACK button:

Radio Data System (RDS) (if equipped):

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for more than

1.5 seconds while the CD is being played, the CD

will play while fast forwarding or rewinding.

When the button is released, the CD will return

to normal play speed.

2. Tune to the desired station.

RDS stands for Radio Data System, and is a

data information service transmitted by some

radio stations on the FM band (not AM band)

3. Push and hold the desired station preset

button

to

.

encoded within

a

regular radio broadcast.

4. The station indicator will then come on.

Memorizing is now complete.

Currently, most RDS stations are in large cities,

but many stations are now considering broad-

casting RDS data.

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for less than 1.5

seconds while the CD is being played, the next

track or the beginning of the current track on

the CD will be played. Push the button several

times to skip through the tracks.

5. Other buttons can be set in the same

manner.

RDS can display:

If the battery cable is disconnected, or if the

fuse opens, the station memory will be erased.

In that case, reset the desired stations.

.

Station name, such as “The Groove”.

Music or programming type such as “Clas-

sical”, “Country” or “Rock”.

CD player operation

REPEAT (RPT):

SEEK tuning:

Place the ignition switch in the “ACC” or “ON”

position, and insert the Compact Disc (CD) into

the slot with the label side facing up. The CD

will be guided automatically into the slot and

start playing.

When the RPT button is pushed while the CD is

played, the play pattern can be changed as

follows:

Push the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button to tune from low to high

or high to low frequencies and to stop at the

next broadcasting station.

(CD)

After loading the CD, the number of tracks on

the CD and the play time will appear on the

display.

(Normal) � 1 Track Repeat

(CD with compressed audio files)

4-56 Display screen, heater and air conditioner, and audio system

(Normal) ? 1 Folder Repeat ? 1 Track Repeat ?

(Normal)

(Normal) ? 1 Folder Repeat ? 1 Track Repeat ?

(Normal)

PLAY:

When the MEDIA button is pushed with the

system off and the USB memory device in-

serted, the system will turn on.

RANDOM (RDM):

When the RDM button is pushed while a CD is

being played, the play pattern can be changed

as follows:

When the RDM button is pushed while a USB

memory device is being played, the play

pattern can be changed as follows.

If another audio source is playing with a USB

memory device inserted, push the MEDIA but-

ton repeatedly until the color display changes

to the USB memory device mode.

(CD)

To change the play mode, push the RDM

button repeatedly, and the mode will change

as follows.

(Normal) � 1 Disc Random

(CD with compressed audio files)

Previous/Next File and Fast Re-

wind/Forward:

(Normal) ? All Random ? 1 Folder Random ?

(Normal)

(Normal) ? 1 Disc Random ? 1 Folder Random

? (Normal)

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for more than

1.5 seconds while a USB memory device is being

played, the USB memory device will play while

forwarding or rewinding. When the button is

released, the USB memory device will return to

normal play speed.

iPod player operation

CD eject:

Connecting iPod:

The USB connection port is located on the

lower part of the instrument panel. Connect

the iPod with a USB connection port using the

cable. See “USB (Universal Serial Bus) connec-

tion port” (P.4-72). The battery of the iPod is

charged while the cable is connected to the

vehicle.

When the CD eject button is pushed with the

CD loaded, the CD will be ejected.

If the CD comes out and is not removed, it will

be pulled back into the slot to protect it.

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for less than 1.5

seconds while the USB memory device is being

played, the next track or the beginning of the

current track on the USB memory device will be

played. Push the button several times to skip

through the tracks.

USB device player operation

USB main operation:

Depending on the version of the iPod, the

display on the iPod shows a NISSAN or Acces-

sory Attached screen when the connection is

completed. When the iPod is connected to the

vehicle, the iPod music library can only be

operated by the vehicle audio controls.

The USB connection port is located on the

lower part of the instrument panel. See “USB

(Universal Serial Bus) connection port” (P.4-72).

Connect a USB memory device into the USB

connection port. The USB memory device will

be activated automatically.

Folder selection:

To change to another folder in the USB

memory device, turn the TUNE·FOLDER dial.

Refer to your device manufacturer’s owner

information regarding the proper use and care

of the device.

If the system has been turned off while the USB

memory device was playing, pushing the

Power/VOL dial will start the USB memory

device.

REPEAT (RPT):

Compatibility:

When the RPT button is pushed while the USB

memory device is played, the play pattern can

be change as follows.

The following models are compatible:

Refer to your device manufacturer’s owner

information regarding the proper use and care

of the device.

.

iPod nano 1G (Firmware version 1.3.1 -)

iPod nano 2G (Firmware version 1.1.3 -)

To change the play mode, push the RPT button

repeatedly and the mode will change as

follows.

Display screen, heater and air conditioner, and audio system 4-57

.

iPod nano 3G (Firmware version 1.0.0 -)

iPod nano 4G (Firmware version 1.0.2 -)

iPod nano 5G (Firmware version 1.0.1 -)

iPod nano 6G (Firmware version 1.0 -)

iPod nano 7G (Firmware version 1.0.0 -)

iPod 5G (Firmware version 1.2.1 -)

iPod classic (Firmware version 1.0.0 -)

iPod Touch (iOS 1.1 -)

operational. To select an item, push ENTER/

SETTING button. Items in the iPod menu appear

on the display in the following order.

REPEAT (RPT):

When the RPT button is pushed while a track is

being played, the play pattern can be changed

as follows:

.

Now playing

Playlists

Artists

Repeat Off ? 1 Track Repeat? All Repeat ?

Repeat Off

Albums

Songs

Podcasts

Genres

RANDOM (RDM):

iPod Touch 2G (iOS 2.1.1 -)

iPod Touch 3G (iOS 3.1 -)

When the RDM button is pushed while a track is

being played, the play pattern can be changed

as follows:

Composers

Audiobooks

Shuffle Songs

iPod Touch 4G (iOS 4.1 -)

iPod Touch 5G (iOS 6.0.0 -)

iPhone (iOS 1.0.0 - 2.2.1)

Shuffle Off ? Track Shuffle ? Shuffle Off

Push the BACK button to return to the previous

screen.

iPhone 3G (iOS 2.1 -)

Bluetooth® audio player operation (if equipped)

iPhone 3GS (iOS 3.0 -)

If you have

a

compatible Bluetooth® audio

For more information about each item, see the

iPod owner’s manual.

iPhone 4/4S (iOS 4.0 -)

device that is capable of playing audio files,

the device can be connected to the vehicle’s

audio system so that the audio files on the

device play through the vehicle’s speakers.

iPhone 5 (iOS 6.0.0 -)

Operations attributable to firmware update by

Apple are not guaranteed.

Previous/Next Track and Fast

Rewind/Forward:

Regulatory information:

MEDIA:

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for more than

1.5 seconds while the iPod is playing, the iPod

will play while fast forwarding or rewinding.

When the button is released, the iPod will return

to the normal play speed.

To switch to the iPod mode, push the MEDIA

button until the USB/iPod mode is selected

while the ignition switch is placed in the “ACC”

or “ON” position.

If another audio source is playing and the iPod

is connected, pushing the MEDIA button

changes to the iPod mode.

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for less than 1.5

seconds while the iPod is playing, the next track

or the beginning of the current track on the

iPod will be played. Push the button several

times to skip through the tracks.

If the system has been turned off while the iPod

was playing, pushing the Power/VOL dial

button will start the iPod.

When the MEDIA button is pushed while the

iPod is connected, the interface for iPod

operation is shown on the audio display. The

items on the menu list can be scrolled by

pushing the SEEK·TRACK (rewind) or SEEK·-

TRACK (fast forward) button while the iPod is

4-58 Display screen, heater and air conditioner, and audio system

Bluetooth® trademark:

Bluetooth® is

Bluetooth® audio main operation:

a

trademark

owned by Bluetooth SIG, Inc.

and licensed to Visteon Cor-

poration.

Connecting Bluetooth® device:

To connect your Bluetooth® device to the

vehicle, follow the procedure below:

1. Push the ENTER/SETTING button.

JVH0622X

To switch to the Bluetooth® audio mode, push

the MEDIA button repeatedly until the Blue-

tooth® audio mode is displayed on the screen.

The controls for the Bluetooth® audio are

displayed on the screen. Use the Preset

3

button to play and use the Preset 4 button to

pause.

JVH0620X

AUX device player operation

The AUX input jack is located on the lower part

of the instrument panel. (See “AUX (auxiliary)

input jack” (P.4-72).) The AUX audio input jack

accepts any standard analog audio input such

as from a portable cassette tape/CD player,

MP3 player or laptop computer.

2. Select the “Bluetooth” key.

3. Select the “Add Phone or Device” key. This

same screen can be accessed to remove,

replace or select

device.

a

different Bluetooth®

4. The system acknowledges the command

and asks you to initiate connecting from

the Bluetooth® device. The connecting

procedure of the Bluetooth® device varies

according to each cellular phone model.

See the owner’s manual of the Bluetooth®

device for details.

NISSAN strongly recommends using a stereo

mini plug cable when connecting your music

device to the audio system. Music may not play

properly when a monaural cable is used.

MEDIA:

To switch to the AUX mode, push the MEDIA

button until the AUX mode is selected while the

ignition switch is placed in the “ACC” or “ON”

position.

Display screen, heater and air conditioner, and audio system 4-59

17. ENTER/SETTING button

FM-AM RADIO WITH COMPACT DISC (CD) PLAYER (Type C)

JVH0924X

1.

MEDIA button

9.

10. SEEK·TRACK (fast forward) button

11. BACK button

SCAN tuning button

2.

3.

4.

5.

6.

7.

8.

FM·AM button

CD eject button

CD button

12. Power/VOL (volume) dial

13. RPT (repeat) button

14. RDM (random) button

DISP (display) button

Color display

iPod MENU button

SEEK·TRACK (rewind) button

15. Radio station preset select buttons

16. TUNE·FOLDER dial

4-60 Display screen, heater and air conditioner, and audio system

the TUNE·FOLDER dial and then push the

ENTER/SETTING button. Turn the TUNE·-

FOLDER dial to adjust the brightness and

contrast of the screen to the preferred

level.

.

Radio frequency range and step

See “Radio operation” (P.4-62).

RDS Display (if equipped)

Audio main operation

The audio system operates when the ignition

switch is placed in the “ACC” or “ON” position.

RDS (radio data system) information can be

shown on the display. Select “RDS Display”

using the TUNE·FOLDER dial and then push

the ENTER/SETTING button. You can toggle

between ON and OFF using the TUNE·-

FOLDER dial.

Head unit:

.

Clock Adjust

The auto loudness circuit enhances the low

and high frequency ranges automatically in

both radio reception and CD playback.

Adjust the clock according to the following

procedure.

Power/VOL dial:

.

Speed Sensitive Vol.

Push Power/VOL dial to turn on and off the

audio system.

To change the Speed Sensitive Volume

(Speed Sensitive Vol.) level from off (0) to

5, turn the TUNE·FOLDER dial.

Turn the Power/VOL dial to adjust the volume.

AUX Vol.

Audio settings:

Controls the volume level of incoming

sound when an auxiliary device is con-

nected to the system. Choose a setting

between 1 and 3 or choose 0 to disable the

feature entirely.

The settings screen will appear when pushing

the ENTER/SETTING button.

The following items are available in the settings

screen.

JVH0729X

.

Bluetooth

.

Language Select

It is possible to set the Bluetooth® settings.

For details of the Bluetooth® settings, see

“Bluetooth® audio player operation” (P.4-

65).

The language settings can be changed.

1) Select “Clock Adjust” using the TUNE·-

Select “Language Select” using the TUNE·-

FOLDER dial and then push the ENTER/

SETTING button. Use the TUNE·FOLDER dial

knob to select the preferred language.

FOLDER dial

ENTER/SETTING button

2) Adjust the hour with the TUNE·FOLDER

dial and then push the ENTER/

SETTING button

3) Adjust the minute with the TUNE·-

FOLDER dial and then push the

and then push the

.

Bass, Treble, Balance and Fade

Controls the sound of the audio system.

Balance adjusts the sound between the left

and right speakers. Fade adjusts the sound

between the front and rear speakers.

.

DISP button:

.

Models without Intelligent Around View

Monitor/Around View Monitor

ENTER/SETTING button

24 hour clock is not available.

On-Screen Clock

.

Select the “Bass”, “Treble”, “Balance” or

“Fade” using the TUNE·FOLDER dial and

then push the ENTER/SETTING button.

Turn the TUNE·FOLDER dial to adjust the

Bass, Treble, balance and Fade of the

screen to the preferred level.

Display of the screen can be turned off

without disrupting the music by pushing

the DISP button. To turn the screen back

on, either push the DISP button once more

or push the FM·AM, CD or the MEDIA button.

.

When this item is turned on, a clock is

always displayed in the upper right corner

of the screen.

Select the “On-Screen Clock” using the

TUNE·FOLDER dial and then push the

ENTER/SETTING button. You can toggle

between ON and OFF using the TUNE·-

FOLDER dial.

.

Brightness and Contrast

Models with Intelligent Around View Moni-

tor/Around View Monitor

Adjust the brightness and contrast of the

screen.

The Intelligent Around View Monitor/

Around View Monitor can be displayed by

Select the “Brightness” or “Contrast” using

Display screen, heater and air conditioner, and audio system 4-61

pushing the DISP button. To display the

audio screen again, push the DISP button

repeatedly. Pushing the FM·AM, CD or the

MEDIA button can also display the audio

screen. For details, see “Intelligent Around

View Monitor/Around View Monitor” (P.4-11).

TUNE (Tuning):

to

Station memory operations:

Turn the radio TUNE·FOLDER dial for manual

tuning.

12 stations can be set for the FM band (6 each

for FM1 and FM2) and 6 stations can be set for

the AM band.

Radio Data System (RDS) (if equipped):

1. Choose the radio band using the FM·AM

button.

RDS stands for Radio Data System, and is a

data information service transmitted by some

radio stations on the FM band (not AM band)

2. Tune to the desired station.

MEDIA button:

encoded within

a

regular radio broadcast.

3. Push and hold the desired station preset

button

Pushing the MEDIA button will switch the audio

source as follows:

Currently, most RDS stations are in large cities,

but many stations are now considering broad-

casting RDS data.

to

.

4. The station indicator will then come on.

Memorizing is now complete.

USB/iPod ? Bluetooth ? AUX ? USB/iPod

RDS can display:

5. Other buttons can be set in the same

manner.

Radio operation

.

Station name, such as “The Groove”.

Frequency range and step change:

Music or programming type such as “Clas-

sical”, “Country” or “Rock”.

If the battery cable is disconnected, or if the

fuse opens, the station memory will be erased.

In that case, reset the desired stations.

To change the frequency range and step

specification of the radio, perform the following

operations.

SEEK tuning:

CD player operation

1. Push ENTER/SETTING button while the

audio system is turned off.

Push the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button to tune from low to high

or high to low frequencies and to stop at the

next broadcasting station.

Place the ignition switch in the “ACC” or “ON”

position. Insert the Compact Disc (CD) into the

slot with the label side facing up. The CD will be

guided automatically into the slot and start

playing.

2. Turn the TUNE·FOLDER dial until “Radio

frequency range and step” is highlighted,

and push the ENTER/SETTING button.

3. Turn the TUNE·FOLDER dial until the pre-

ferred region (Latin America or Other) is

displayed, and push the ENTER/SETTING

button.

SCAN tuning:

After loading the CD, the number of tracks on

the CD and the play time will appear on the

display.

Push the SCAN tuning button to tune from low

to high frequencies and stop at each broad-

casting station for

5

seconds. Pushing the

If the radio is already operating, it will auto-

matically turn off and the CD will play.

4. The system will restart automatically apply-

ing the frequency specification of the

selected region.

button again during this 5 seconds period will

stop SCAN tuning and the radio will remain

tuned to that station.

If the system has been turned off while the CD

was playing, pushing the Power/VOL dial will

start the CD.

If the SCAN tuning button is not pushed within

5 seconds, SCAN tuning moves to the next

station.

radio (FM·AM) band select:

Pushing the FM·AM button will change the

band as follows:

PLAY:

When the CD button is pushed with the system

off and the CD loaded, the system will turn on

and the CD will start to play.

AM ? FM1 ? FM2 ? AM

When the CD button is pushed with the CD

4-62 Display screen, heater and air conditioner, and audio system

loaded and the radio playing, the radio will

automatically be turned off and the CD will

start to play.

(Normal) ? 1 Disc Random ? 1 Folder Random

? (Normal)

Previous/Next File and Fast Re-

wind/Forward:

CD eject:

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for more than

1.5 seconds while a USB device is being played,

the USB device will play while forwarding or

rewinding. When the button is released, the

USB device will return to normal play speed.

SEEK/TRACK:

When the CD eject button is pushed with the

CD loaded, the CD will be ejected.

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for more than

1.5 seconds while the CD is being played, the CD

will play while fast forwarding or rewinding.

When the button is released, the CD will return

to normal play speed.

If the CD comes out and is not removed, it will

be pulled back into the slot to protect it.

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for less than 1.5

seconds while the USB device is being played,

the next track or the beginning of the current

track on the USB device will be played. Push the

button several times to skip through the tracks.

USB device player operation

USB main operation:

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for less than 1.5

seconds while the CD is being played, the next

track or the beginning of the current track on

the CD will be played. Push the button several

times to skip through the tracks.

The USB connection port is located on the

lower part of the instrument panel. See “USB

(Universal Serial Bus) connection port” (P.4-72).

Connect a USB memory device into the USB

connection port. The USB memory device will

be activated automatically.

Folder selection:

To change to another folder in the USB device,

turn the TUNE·FOLDER dial.

If the system has been turned off while the USB

memory device was playing, pushing the

Power/VOL dial will start the USB memory

device.

REPEAT (RPT):

When the RPT button is pushed while the CD is

played, the play pattern can be changed as

follows:

When the RPT button is pushed while the USB

device is played, the play pattern can be

change as follows.

Refer to your device manufacturer’s owner

information regarding the proper use and care

of the device.

(CD)

To change the play mode, push the RPT button

repeatedly and the mode will change as

follows.

(Normal) � 1 Track Repeat

(CD with compressed audio files)

Play:

When the MEDIA button is pushed with the

system turned off and the USB device inserted,

the system will turn on.

(Normal) ? 1 Folder Repeat ? 1 Track Repeat ?

(Normal)

(Normal) ? 1 Folder Repeat ? 1 Track Repeat ?

(Normal)

If another audio source is playing with a USB

device inserted, push the MEDIA button repeat-

edly until the color display changes to the USB

device mode.

RANDOM (RDM):

When the RDM button is pushed while a CD is

being played, the play pattern can be changed

as follows:

When the RDM button is pushed while a USB

device is being played, the play pattern can be

changed as follows.

(CD)

To change the play mode, push the RDM

button repeatedly, and the mode will change

as follows.

(Normal) � 1 Disc Random

(CD with compressed audio files)

Display screen, heater and air conditioner, and audio system 4-63

(Normal) ? All Random ? 1 Folder Random ?

(Normal)

.

iPod Touch 5G (iOS 6.0.0 -)

iPhone (iOS 1.0.0 - 2.2.1)

iPhone 3G (iOS 2.1 -)

.

Composers

Audiobooks

Shuffle Songs

iPod player operation

iPhone 3GS (iOS 3.0 -)

iPhone 4/4S (iOS 4.0 -)

iPhone 5 (iOS 6.0.0 -)

Push the BACK button to return to the previous

screen.

Connecting iPod:

The USB connection port is located on the

lower part of the instrument panel. See “USB

(Universal Serial Bus) connection port” (P.4-72).

For more information about each item, see the

iPod owner’s manual.

Operations attributable to firmware update by

Apple are not guaranteed.

Connect the iPod cable to the USB connection

port. The battery of the iPod is charged while

the cable is connected to the vehicle.

Previous/Next Track and Fast

Rewind/Forward:

iPod main operation:

The system operates when the ignition switch

is in the “ACC” or “ON” position. Push the MEDIA

button repeatedly or push the iPod MENU

button to switch to the iPod mode.

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for more than

1.5 seconds while the iPod is playing, the iPod

will play while fast forwarding or rewinding.

When the button is released, the iPod will return

to the normal play speed.

Depending on the version of the iPod, the

display on the iPod shows a NISSAN or Acces-

sory Attached screen when the connection is

completed. When the iPod is connected to the

vehicle, the iPod music library can only be

operated by the vehicle audio controls.

If the system has been turned off while the iPod

was playing, pushing the Power/VOL dial will

start the iPod.

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for less than 1.5

seconds while the iPod is playing, the next track

or the beginning of the current track on the

iPod will be played. Push the button several

times to skip through the tracks.

If another audio source is playing and the iPod

is connected, pushing the iPod MENU button or

the MEDIA button repeatedly will change to the

iPod mode.

Refer to your device manufacturer’s owner

information regarding the proper use and care

of the device.

Compatibility:

When the iPod MENU button is pushed while

the iPod is connected, the interface for iPod

operation is shown on the audio display. The

items on the menu list can be scrolled by

turning the TUNE·FOLDER dial while the iPod is

operating. To select an item, push ENTER/

SETTING button. Items in the iPod menu appear

on the display in the following order.

The following models are compatible:

.

iPod nano 1G (Firmware version 1.3.1 -)

iPod nano 2G (Firmware version 1.1.3 -)

iPod nano 3G (Firmware version 1.0.0 -)

iPod nano 4G (Firmware version 1.0.2 -)

iPod nano 5G (Firmware version 1.0.1 -)

iPod nano 6G (Firmware version 1.0 -)

iPod nano 7G (Firmware version 1.0.0 -)

iPod 5G (Firmware version 1.2.1 -)

iPod classic (Firmware version 1.0.0 -)

iPod Touch (iOS 1.1 -)

REPEAT (RPT):

When the RPT button is pushed while a track is

being played, the play pattern can be changed

as follows:

(Repeat off) ? 1 Track Repeat? All Repeat ?

(Repeat off)

.

Now playing

Playlists

Artists

RANDOM (RDM):

Albums

Songs

When the RDM button is pushed while a track is

being played, the play pattern can be changed

as follows:

iPod Touch 2G (iOS 2.1.1 -)

Podcasts

Genres

iPod Touch 3G (iOS 3.1 -)

iPod Touch 4G (iOS 4.1 -)

(Shuffle off) ? Track Shuffle ? (Shuffle off)

4-64 Display screen, heater and air conditioner, and audio system

procedure of the Bluetooth® device varies

according to each cellular phone model.

See the owner’s manual of the Bluetooth®

device for details.

Bluetooth® audio player operation

If you have

device that is capable of playing audio files,

the device can be connected to the vehicle’s

audio system so that the audio files on the

device play through the vehicle’s speakers.

MEDIA button:

a

compatible Bluetooth® audio

To switch to the AUX mode, push the MEDIA

button until the AUX mode is selected while the

ignition switch is placed in the “ACC” or “ON”

position.

Bluetooth® audio main operation:

Regulatory information:

Bluetooth® trademark:

Bluetooth® is

a

trademark

owned by Bluetooth SIG, Inc.

and licensed to Visteon Cor-

poration.

Connecting Bluetooth® device:

To connect your Bluetooth® device to the

vehicle, follow the procedure below:

JVH0622X

1. Push the ENTER/SETTING button.

To switch to the Bluetooth® audio mode, push

the MEDIA button repeatedly until the Blue-

tooth® audio mode is displayed on the screen.

The controls for the Bluetooth® audio are

displayed on the screen. Use the Preset

3

button to play and use the Preset 4 button to

pause.

AUX device player operation

The AUX input jack is located on the lower part

of the instrument panel. (See “AUX (auxiliary)

input jack” (P.4-72).) The AUX audio input jack

accepts any standard analog audio input such

as from a portable cassette tape/CD player,

MP3 player or laptop computer.

JVH0620X

2. Select the “Bluetooth” key.

3. Select the “Add Phone or Device” key. This

same screen can be accessed to remove,

NISSAN strongly recommends using a stereo

mini plug cable when connecting your music

device to the audio system. Music may not play

properly when a monaural cable is used.

replace or select

device.

a

different Bluetooth®

4. The system acknowledges the command

and asks you to initiate connecting from

the Bluetooth® device. The connecting

Display screen, heater and air conditioner, and audio system 4-65

FM-AM RADIO WITH COMPACT DISC (CD) PLAYER (Type D)

JVH1566X

Models with RADIO button

4-66 Display screen, heater and air conditioner, and audio system

volume will be adjusted automatically as the

vehicle speed changes. For operations to turn

on and off the SSV function, see “Audio

settings” (P.4-6).

Audio settings:

For the operations to adjust the audio settings,

see “Audio settings” (P.4-6).

Traffic Announcement (if equipped):

Touch “TA” on the audio screen to turn on or off

the Traffic Information setting. When it is

turned on, the Traffic Information will interrupt

the music that was playing and informs the

driver of the received traffic information.

Radio operation

The audio system operates when the ignition

switch is placed in the “ACC” or “ON” position.

RADIO/FM·AM button:

Push the RADIO/FM·AM button to change the

band as follows:

AM ? FM ? AM

If another audio source is playing when the

RADIO/FM·AM button is pushed, the audio

source playing will automatically be turned off

and the last radio station played will begin

playing.

JVH1567X

Models with FM·AM button

1.

CD button

Audio main operation

The audio system operates when the ignition

switch is placed in the “ACC” or “ON” position.

Radio tuning:

2.

3.

4.

5.

6.

7.

8.

9.

RADIO/FM·AM button

Disc eject button

Disc insert slot

When in radio mode, the radio can be tuned

using the touchscreen. To bring up the visual

tuner, touch the “Tune” key on the lower part of

Power/VOLUME dial:

Seek/Track buttons

Power/VOLUME dial

AUX (auxiliary) button

ENTER/Scroll dial

BACK button

Push Power/VOLUME dial to turn on and off the

audio system.

the screen.

A

screen appears with

a

bar

running from low frequencies on the left to

high frequencies on the right.

Turn the Power/VOLUME dial to adjust the

volume.

One of the following operations can be used for

tuning.

This vehicle may be equipped with Speed

Sensitive Volume (SSV) function for audio.

When this function is turned on, the audio

10. SETUP button

Display screen, heater and air conditioner, and audio system 4-67

.

Touching the bar on the screen

Touching “ ”/“ ” on the screen

Turning ENTER/Scroll dial

play.

CD player operation

CD/MP3/WMA display mode:

Loading disc:

While listening to a CD or an MP3/WMA CD,

certain text may be displayed (when

Insert a CD into the slot with the label side

facing up. The CD will be guided automatically

into the slot and will start playing. If the radio is

already playing, it will automatically turn off,

and the CD will start playing.

To return to the regular radio display screen,

touch the “OK” key.

a

CD

encoded with text is being used). Depending

on how the CD or MP3/WMA CD is encoded, the

text is displayed listing the artist, album and

song title. Operation keys are also displayed on

the screen.

Station List:

When in FM mode, touch “FM List” to display the

station list.

CAUTION:

Mix:

Seek/Track buttons:

Do not force the compact disc into the slot.

This could damage the player.

Touching the “Mix” key while an CD or MP3 CD is

playing will alternate the random play pattern

as follows:

When in radio mode, push the Seek/Track

buttons to tune from low to high or high to

low frequencies and to stop at the next broad-

casting station.

button:

(CD)

(Normal) ? Mix ? (Normal)

(CD with compressed audio files)

When the CD button is pushed with the system

off and the CD loaded, the system will turn on

and the CD will start to play.

Station memory keys:

Up to six stations can be stored for AM band,

and up to twelve stations can be stored for FM

bands.

(Normal) ? Random Folder ? Random All ?

(Normal)

When the CD button is pushed with

a

CD

loaded while the radio playing, the radio will

turned off and the CD will start to play.

Repeat:

1. Choose the radio band using the RADIO/

FM·AM button.

Touching the “Repeat” key while an CD or MP3

CD is playing will alternate the repeat play

pattern as follows:

2. Tune to the desired station. Touch and hold

any of the desired station memory keys

until a beep sound is heard.

Seek/Track buttons:

When the Seek/Track (rewind) or Seek/Track

(fast forward) button is pushed and held while

the CD is being played, the CD will play while

fast forwarding or rewinding. When the button

is released, the CD will return to normal play

speed.

(CD)

(Normal) ? Repeat ? (Normal)

(CD with compressed audio files)

For FM, touch the “7-12” key to display the 7

- 12 memory keys.

3. The station indicator will then come on and

the sound will resume. Programming is

now complete.

(Normal) ? Repeat Track ? Repeat Folder ?

(Normal)

When the Seek/Track (rewind) or Seek/Track

(fast forward) button is pushed while the CD is

being played, the next track or the beginning of

the current track on the CD will be played. Push

the Seek/Track (rewind) button again to select

the previous track. If the last track on a CD is

skipped, the first track on the disc will play. If

the last track in a folder of an MP3 CD is

skipped, the first track of the next folder will

Browse:

Touch the “Browse” key to display the titles on

the CD in list format. Touch the title of a song in

the list to play a song. If an MP3 CD is playing,

touching the “Browse” key will also list the

folders on the disc. Touch the “Folder Up” key to

view the lists in the upper layer. Follow the

procedure for selecting

touchscreen to choose a folder.

a

song with the

4-68 Display screen, heater and air conditioner, and audio system

(Normal) ? Random Folder ? Random All ?

(Normal)

iPod player operation

Disc eject button:

Connecting iPod:

Repeat:

When the Disc eject button is pushed while a

CD is loaded, the CD will be ejected.

The USB connection port is located on the

lower part of the instrument panel. See “USB

(Universal Serial Bus) connection port” (P.4-72).

Touching the “Repeat” key on the screen while

a USB memory device is playing will alternate

the repeat play pattern as follows:

If the CD is not removed within 10 seconds, the

CD will be reloaded.

If your iPod supports charging via

a

USB

(Normal) ? Repeat Track ? Repeat Folder ?

(Normal)

connection, its battery will be charged while

connected to the vehicle with the ignition

switch placed in the “ACC” or “ON” position.

USB device operation

The audio system operates when the ignition

switch is placed in the “ACC” or “ON” position.

Browse:

Touch “Browse” key to display USB interface.

Select the songs you wish to play by touching

the item on the screen.

Compatibility:

The USB connection port is located on the

lower part of the instrument panel. See “USB

(Universal Serial Bus) connection port” (P.4-72).

Connect a USB memory device into the USB

connection port. The USB memory device will

be activated automatically.

The following models are compatible:

.

iPod 5th Generation (firmware version 1.2.3

or later)

Seek/Track buttons:

.

iPod Classic (firmware version 1.1.1 or later)

iPod Touch (firmware version 2.0.0 or later)*

Push the Seek/Track (rewind) button while an

audio file on the USB memory device is playing

to return to the beginning of the current track.

Push the button several times to skip backward

several tracks.

Refer to your device manufacturer’s owner

information regarding the proper use and care

of the device.

iPod nano - 1st generation (firmware ver-

sion 1.3.1 or later)

.

iPod nano

version 1.1.3 or later)

-

2nd generation (firmware

USB main operation:

Push the Seek/Track (fast forward) button

while an audio file on the USB memory device

is playing to advance one track. Push the

button several times to skip forward several

tracks. If the last track on the USB memory

device is skipped, the first track of the next

folder is played.

iPod nano - 3rd generation (firmware ver-

sion 1.1.3 or later)

If another audio source is playing with a USB

memory device inserted, push the AUX button

until the screen on the display changes to the

USB memory mode.

iPod nano - 4th generation (firmware ver-

sion 1.0.4 or later)

iPod nano - 5th generation (firmware ver-

sion 1.0.1 or later)

If the system has been turned off while the USB

memory device was playing, push the Power/

VOLUME dial to restart the USB memory device.

* Some features of this iPod may not be fully

functional.

Touch the name of a song on the screen to

begin playing that song.

Make sure that your iPod firmware is updated

to the version indicated above.

USB screen operation:

iPod main operation:

While files on a USB memory device are playing,

the play pattern can be altered so that songs

are repeated or played randomly.

If the system has been turned off while the iPod

was playing, pushing the Power/VOLUME dial

will start the iPod.

Mix:

If another audio source is playing with an iPod

connected, push the AUX button until the

screen on the display changes to the iPod

Touching the “Mix” key on the screen while a

USB memory device is playing will alternate the

random play pattern as follows:

Display screen, heater and air conditioner, and audio system 4-69

mode.

.

Podcasts

Repeat:

Update Music Library

Refer to your device manufacturer’s owner

information regarding the proper use and care

of the device.

Touching the “Repeat” key on the screen while

an iPod is playing will alternate the repeat play

pattern as follows:

Scrolling menus:

(Normal) ? Repeat Song ? (Normal)

Interface operation:

Seek/Track buttons:

Push the Seek/Track (rewind) or Seek/Track

(fast forward) button to skip backward or

forward one track.

Push and hold the Seek/Track (rewind) or

Seek/Track (fast forward) button for 1.5 sec-

onds while a track is playing to reverse or fast

forward the track being played. The track plays

at an increased speed while reversing or fast

forwarding. When the button is released, the

track returns to normal play speed.

JVH0681X

While navigating long lists of artists, albums or

songs in the music menu, it is possible to scroll

the list by the first character in the name. To

activate character indexing, touch the “A-Z” key

in the upper right corner of the screen. Turn the

ENTER/Scroll dial to choose the number or

letter to jump to in the list and then push the

ENTER/Scroll dial.

JVH1508X

The interface for iPod operation shown on the

vehicle’s audio system display screen is similar

to the iPod interface. Use the touchscreen,

BACK button or the ENTER/Scroll dial to

navigate the menus on the screen.

Bluetooth® audio player operation

a

If you have

compatible Bluetooth® audio

device that is capable of playing audio files,

the device can be connected to the vehicle’s

audio system so that the audio files on the

device play through the vehicle’s speakers.

When the iPod is playing, touch the “Menu” key

to bring up the iPod interface.

If no character is selected after thirty seconds,

the display returns to normal.

Bluetooth® trademark:

Depending on the iPod model, the following

items may be available on the menu list screen.

For further information about each item, see

the iPod owner’s manual.

Random and repeat play mode:

Bluetooth® is

a

trademark

owned by Bluetooth SIG, Inc.

and licensed to Robert Bosch

GmbH.

While the iPod is playing, the play pattern can

be altered so that songs are repeated or played

randomly.

.

Playlists

Artists

Mix:

Albums

Touching the “Mix” key on the screen while an

iPod is playing will alternate the random play

pattern as follows:

Songs

Genres

Composers

Audiobooks

(Normal) ? Shuffle Songs ? (Normal)

4-70 Display screen, heater and air conditioner, and audio system

Connecting Bluetooth® audio:

tails.

NOTE:

A compatible smartphone and registration is

required to use mobile applications or to

access connected features of certain vehicle

applications.

Bluetooth® audio player main operation:

To switch to the Bluetooth® audio mode, push

the AUX button repeatedly until the Bluetooth®

audio mode is displayed on the screen.

Registering with NissanConnect App

The controls for the Bluetooth® audio are

displayed on the screen.

To use the Smartphone Integration feature, it is

necessary for the user to register. In order to

register, visit the NissanConnect website for

more information and to sign up. Once regis-

tered, download the NissanConnect Mobile App

from your compatible phone’s application

download source and then log into the appli-

cation.

AUX device player operation

The AUX input jack is located on the lower part

of the instrument panel. (See “AUX (auxiliary)

input jack” (P.4-72).) The AUX audio input jack

accepts any standard analog audio input such

as from a portable cassette tape/CD player,

MP3 player or laptop computer.

JVH1561X

Type A (Example)

Connecting phone

Before connecting a portable device to a jack,

turn off the power of the device.

To use this feature, a compatible smartphone

must be connected via Bluetooth® or USB to

the vehicle. For the Bluetooth® connecting

procedure, see “Bluetooth® Hands-Free Phone

System (for type C audio)” (P.4-87) or “Blue-

tooth® Hands-Free Phone System (for type D

audio)” (P.4-91).

NISSAN strongly recommends using a stereo

mini plug cable when connecting your music

device to the audio system. Music may not play

properly when a monaural cable is used.

button:

NOTE:

JVH1507X

.

For models with navigation system, Ap-

ple iPhone must be plugged via USB for

NissanConnect Apps to function.

To switch to the AUX mode, push the AUX

button until the AUX mode is selected while the

ignition switch is placed in the “ACC” or “ON”

position.

Type B (Example)

To connect your Bluetooth® audio device to the

vehicle, follow the procedure below:

For models without navigation system,

Apple iPhone must be paired via Blue-

tooth® for NissanConnect Apps to func-

tion.

1. Push the SETUP button.

NISSANCONNECT APP SMARTPHONE

INTEGRATION (if equipped)

2. Select the “Phone & Bluetooth”/“Telephone

& Bluetooth” key.

This vehicle is equipped with Smartphone

Integration technology. This allows many com-

patible Smartphone applications to be dis-

played and easily controlled through the

vehicle’s touchscreen.

.

For Android phones, NissanConnect Apps

REQUIRES the phone to be paired via

Bluetooth®.

3. Select the “Pair New Device” key.

4. The system acknowledges the command

and asks you to initiate connecting from

the phone handset. The connecting proce-

dure of the cellular phone varies according

to each cellular phone model. See the

Bluetooth® device owner’s manual for de-

Display screen, heater and air conditioner, and audio system 4-71

.

Do not leave the USB cable in a place

where it can be pulled unintentionally.

Pulling the cable may damage the USB

connection port.

devices, such as some MP3 players, can be

connected to the system through the AUX

input jack.

Application download

Once connected, the NissanConnect Mobile

App will search your phone to determine which

compatible applications are currently installed.

The vehicle will then download the in-vehicle

interface for each of these compatible applica-

tions. Once downloaded, the user can access

many smartphone Applications through the

vehicle touchscreen by pushing the INFO

button followed by touching the “My Apps”

key. For more information on application avail-

ability visit the NissanConnect website.

Before connecting a device to a jack, turn off

the power of the portable device.

Refer to your device manufacturer’s owner

information regarding the proper use and care

of the device.

With a compatible device connected to the jack,

push the corresponding button (depends on

the audio system) repeatedly until the display

switches to the AUX mode.

NISSAN strongly recommends using a stereo

mini plug cable when connecting your music

device to the audio system. Music may not play

properly when a monaural cable is used.

USB (Universal Serial Bus) CONNECTION

PORT

STEERING WHEEL MOUNTED CON-

TROLS FOR AUDIO (if equipped)

WARNING:

Do not connect, disconnect or operate the

USB device while driving. Doing so can be a

distraction. If distracted you could lose con-

trol of your vehicle and cause an accident or

serious injury.

JVH0683X

The USB connection port is located on the

lower part of the instrument panel. Insert USB

devices or iPod connectors into this port.

CAUTION:

AUX (auxiliary) INPUT JACK

.

Do not force the USB device into the USB

connection port. Inserting the USB device

tilted or up-side-down into the USB con-

nection port may damage the USB con-

nection port. Make sure that the USB

device is connected correctly into the

USB connection port.

JVH1545X

1.

Menu control buttons/OK button

Volume control buttons

Tuning buttons

2.

3.

4.

Do not grab the USB connection port

cover (if equipped) when pulling the USB

device out of the USB connection port.

This could damage the USB connection

port and the USB connection port cover.

Back button

JVH0684X

The AUX input jack is located on the lower part

of the instrument panel. Compatible audio

4-72 Display screen, heater and air conditioner, and audio system

Menu control buttons/OK button

Push the

vehicle information display to audio mode.

Push the OK button until the preferred avail-

able audio source is selected.

USB memory

Back button

/

buttons and switch the

.

Do not touch the terminal portion of the

USB memory.

Push the Back button to return to the previous

screen or cancel the current selection.

Do not place heavy objects on the USB

memory.

DISC/USB MEMORY CARE AND CLEAN-

ING

Do not store the USB memory in highly

humid locations.

Volume control buttons

Push the + or − button to increase or decrease

the volume.

Do not expose the USB memory to direct

sunlight.

Disc

Do not spill any liquids on the USB memory.

Tuning buttons

Refer to the USB memory owner’s manual for

the details.

Push the

or track.

/

buttons to select a station

Depending on the status of the vehicle infor-

mation display, the tuning buttons cannot be

used for audio control.

RADIO:

.

Pushing

Next or previous preset station

Pushing longer

Next or previous station

/

shorter

SAA0451

.

/

.

Handle a disc by its edges. Never touch the

surface of the disc. Do not bend the disc.

Always place the discs in the storage case

when they are not being used.

CD, iPod, USB device or Bluetooth® audio:

.

Pushing

/

shorter

To clean a disc, wipe the surface from the

center to the outer edge using a clean, soft

cloth. Do not wipe the disc using a circular

motion.

Next track or the beginning of the current

track (the previous track if the button is

pushed immediately after the current track

starts playing)

Do not use a conventional record cleaner

or alcohol intended for industrial use.

.

Pushing

/

longer

Forward or rewind

.

A new disc may be rough on the inner and

outer edges. Remove the rough edges by

rubbing the inner and outer edges with the

side of a pen or pencil as illustrated.

Display screen, heater and air conditioner, and audio system 4-73

ANTENNA

CAR PHONE OR CB RADIO (if equipped)

When installing a CB, ham radio or a car phone

in your vehicle, be sure to observe the following

cautions, otherwise the new equipment may

adversely affect the Engine Control System and

other electronic parts.

.

The vehicle enters an automatic car

wash.

ROD ANTENNA (if equipped)

The vehicle enters a garage with a low

ceiling.

The vehicle is covered with a car cover.

CAUTION:

SHARK FIN ANTENNA (if equipped)

The shark fin antenna is located on the rear

part of the vehicle roof.

.

Keep the antenna as far away as possible

from the Electronic Control Module.

Keep the antenna wire at least 20 cm (8

in) away from the Engine Control har-

nesses. Do not route the antenna wire

next to any harnesses.

.

Adjust the antenna standing wave ratio

as recommended by the manufacturer.

Connect the ground wire from the radio

chassis to the body.

For details, consult a NISSAN dealer.

JVH0666X

The antenna can be removed if necessary.

Hold the bottom of the antenna and remove by

turning counterclockwise.

To install the antenna, turn the antenna clock-

wise and tighten.

CAUTION:

To avoid damaging or deforming the anten-

na, be sure to remove the antenna under the

following conditions.

4-74 Display screen, heater and air conditioner, and audio system

Bluetooth® HANDS-FREE PHONE

SYSTEM (for type A audio)

The Bluetooth® system may not be able to

connect with your cellular phone for the

following reasons:

REGULATORY INFORMATION

Bluetooth® trademark

WARNING:

.

Use a phone after stopping your vehicle

in a safe location. If you have to use a

phone while driving, exercise extreme

caution at all times so full attention may

be given to vehicle operation.

.

The cellular phone is too far away from the

vehicle.

Bluetooth® is

a

trademark

owned by Bluetooth SIG, Inc.

and licensed to Visteon Cor-

poration.

The Bluetooth® mode on your cellular

phone has not been activated.

Your cellular phone has not been paired

with the Bluetooth® system of the audio

unit.

If you find yourself unable to devote full

attention to vehicle operation while using

the phone, pull off the road to a safe

location and stop your vehicle before

doing so.

NOTE:

The audio system only supports Bluetooth®

devices with AVRCP (Audio Video Remote

Control Profile) version 1.3, or 1.0 or earlier.

.

The mobile phone does not support Blue-

tooth® technology.

NOTE:

.

CONTROL BUTTONS AND MICROPHONE

Instrument panel:

CAUTION:

For details, see your cellular phone’s

owner’s manual.

To avoid draining the vehicle battery, use a

phone after starting the engine.

.

For assistance with your cellular phone

integration, please visit your local NISSAN

dealer.

Bluetooth® is a wireless radio communication

standard. This system offers

a

hands-free

facility for your cellular phone to enhance

driving comfort.

To use the Bluetooth® Hands-Free Phone

System, your cellular phone must first be setup.

For details, see “Bluetooth® settings” (P.4-76).

Once it has been setup, the hands-free mode is

automatically activated on the registered cel-

lular phone (via Bluetooth®) when it comes into

range.

JVH0856X

1.

Phonebook quick search button

A notification message appears on the audio

display when the phone is connected, when an

incoming call is being received, as well as when

a call is initiated.

2.

3.

4.

Back

button

Phone

MENU/ENTER dial

When a call is active, the audio system, micro-

phone, and steering wheel mounted control

buttons enable hands-free communication.

If the audio system is in use at the time, the

radio, CD, iPod, USB audio, Bluetooth® audio or

AUX source mode will be muted and will stay

muted until the active call has ended.

Display screen, heater and air conditioner, and audio system 4-75

Steering wheel mounted control:

Bluetooth® SETTINGS

Pairing device

Setting items

To set up the Bluetooth® system with a device,

the following items are available:

Enter the phone setup menu via the

button on the instrument panel, select the

“Bluetooth” key, and then check if the Blue-

tooth® is set to on. (If not push the MENU/

ENTER dial to turn it on.)

To setup the Bluetooth® system to pair (con-

nect or register) your preferred cellular phone,

follow the following procedure.

1. To pair a device, select the “Pair device” key

on the display.

JVH1553X

2. A notification message will be displayed

when the phone is successfully paired.

1. Volume control buttons

JVH0847X

Push the buttons to increase or decrease

the volume of the speakers.

3. The display will return to the current audio

source status after the connection is com-

plete.

.

Scan device

2. Phone send

.

button

Shows all available visible Bluetooth® de-

vices and initializes Bluetooth® connection

from the audio unit.

Accept an incoming call by pushing

once.

.

While the Bluetooth® connection is active,

the following icons will appear on the

display.

.

Pair device

.

Redial the last outgoing call by pushing

the button for more than 2 seconds.

Initializes Bluetooth® connection from the

mobile device.

—

: Signal strength indicator

3. Phone end

.

button

: Battery status indicator*

Sel. device

Reject an incoming call by pushing the

button during an incoming call.

: Bluetooth® connection ON indica-

Paired Bluetooth® devices are listed and

can be selected for connection.

tor

*: If low battery is indicated, the Blue-

tooth® device must be recharged soon.

.

End an active call by pushing the button

once.

Del. device

A

deleted.

registered Bluetooth® device can be

.

Up to five different Bluetooth® devices can

be registered. However, only one device can

be used at a time. If five different Blue-

tooth® devices are registered, a new device

can only replace one of the five existing

paired devices.

Microphone:

Microphone is located near the map lights.

Settings

Sets the phone volume, ringtone, and

allows the phonebook from your mobile

phone to be downloaded to the system.

See “General settings” (P.4-80).

The pairing procedure and operation may

vary according to device type and compat-

ibility. See the Bluetooth® device owner’s

manual for further details.

.

Bluetooth

If this setting is turned off, the connection

between the Bluetooth® devices and the in-

vehicle Bluetooth® module will be can-

celled.

4-76 Display screen, heater and air conditioner, and audio system

3) Enter the number code shown on the

relevant device with the device’s own

keypad, and push the confirmation key

on the Bluetooth® device.

Scan device:

Pair device:

1. Push the

button on the instrument

.

Turn on the Bluetooth® on the audio unit.

See “Bluetooth” (P.4-78).

panel. Select “Scan device” key. The audio

unit searches for the Bluetooth® devices

and shows all devices that were found.

.

Use the audio unit to pair:

When an Apple device is connected via the USB

connection port and Bluetooth®, the device will

Push the

panel. Select the “Pair Device” key.

button on the instrument

Make sure your Bluetooth® device is avail-

able at this time.

be recognized as

a

Bluetooth® device. The

The pairing procedure depends on the

Bluetooth® device to be connected:

battery of the Apple device is charged while

the cable is connected to the USB connection

port.

2. Select the device to be paired using the

MENU/ENTER dial.

1) Device without PIN code:

The Bluetooth® connection will be auto-

matically connected without any further

input.

3. The pairing procedure depends on the

device to being connected:

Refer to the relevant Bluetooth® device owner’s

manual for further details.

a. Device without PIN code:

Sel. device:

2) Device with PIN code:

The Bluetooth® will be connected automa-

tically without any further input.

The paired device list shows which Bluetooth®

audio or cellular phone devices have been

paired or registered to the system. Select the

appropriate device to connect to the system.

Two different ways of pairing are possible

depending on the device. For the correct

procedure details, see “Scan device” (P.4-77).

b. Device with PIN code:

.

Use the Bluetooth® audio/cellular phone

device to pair:

Two different ways of pairing are possible

depending on the device:

The following icons (if equipped) indicate the

capability of the registered device:

For models with DAB

.

: Cellular phone integration

Audio streaming (A2DP

Audio Distribution Profile)

1) Switch on the search mode for Blue-

tooth® devices. If the search mode finds

the audio unit, it will be shown on the

device display.

The message “Pairing request” and “Con-

firm password” together with a 6-digit code

will be displayed. The unique and identical

code should be displayed on the device. If

the codes are identical, confirm on the

device.

:

–

Advanced

Del. device:

registered device can be removed from

2) Select the unit device shown as “My

Car”.

A

Bluetooth® system registration. Select a regis-

tered device and push the MENU/ENTER dial to

confirm to deletion.

3) Enter the number code shown on the

relevant Bluetooth® device with the

device’s own keypad, and push the

confirmation key on the device and

the MENU/ENTER dial on the audio unit.

The Bluetooth® connection will be made.

For models without DAB

The message “To pair” and “Enter Pin”

together with a 4-digit code will be dis-

played.

Settings:

Sets the phone volume, ringtone, and allows

the phonebook from your mobile phone to be

downloaded to the system. See “General set-

tings” (P.4-80).

For models without DAB

1) Switch on the search mode for Blue-

tooth® devices.

Confirm the PIN code on the device. The

Bluetooth® connection will be made.

If the search mode finds the audio unit it

will be shown on the device display.

2) Select the unit device shown as “My

Car”.

Display screen, heater and air conditioner, and audio system 4-77

Bluetooth:

Answering and during a call:

Answer the call by selecting on the display or

by pushing on the steering wheel.

Making a call

WARNING:

If Bluetooth® signal has been turned off,

notification message “ON/OFF” appears when

you select “Bluetooth” from the phone menu.

a

/

During the call, the following icons are avail-

able:

Park the vehicle in a safe location, and apply

the parking brake before making a call.

(Push the

button to display the phone

menu.) To turn the Bluetooth® signal on, push

the MENU/ENTER dial and a follow up screen

will appear. Select “ON” and push the MENU/

ENTER dial to display the Bluetooth® settings

menu screen.

.

:

Select this item to end the call.

:

Select this item to put the call on hold.

:

USING THE SYSTEM

The hands-free mode can be operated using

the

Select this item to transfer the call from the

hands-free phone system to your cellular

phone.

button on the instrument panel.

.

:

Receiving a call

Select this item to transfer the call back to

the hands-free phone system from the

cellular phone.

JVH0863X

#123:

A call can be initiated using one of the following

methods:

Select this item to enter numbers during a

call. For example, use this function when

directed by an automated phone system to

dial an extension number.

.

Making a call from the phonebook

Manually dialing a phone number

Redialing

Putting a call on hold:

Using call history (Call List menu)

— Dialed

To put a call on hold, select . Select

return to the call. To reject the call select

to

.

— Received

JVH0857X

Rejecting a call:

— Missed

When receiving an incoming call, the display on

the audio unit will show the caller’s phone

number (or a notification message that the

caller’s phone number cannot be shown) and

three operation icons as illustrated. To high-

light different icons, turn the MENU/ENTER dial.

Push the MENU/ENTER dial to select the high-

lighted icon.

To reject an incoming call, select

pushing

or by

Making a call from the phonebook:

on the steering wheel.

Once the Bluetooth® connection has been

made between the registered cellular phone

and the hands-free phone system, phonebook

data will be transferred automatically to the

hands-free phone system. The transfer may

take a while before completion.

4-78 Display screen, heater and air conditioner, and audio system

NOTE:

The quick search mode can be used as follows:

1. Push the A-Z button.

To delete the last number entered, scroll to

the “/” (Backspace symbol) and once high-

lighted, push the MENU/ENTER dial. The last

number will be deleted. Pushing the MENU/

ENTER dial repeatedly will delete each

subsequent number.

Phone book data will be erased when:

.

Switching to another registered cellular

phone.

2. Turn the MENU/ENTER dial for the first

alphabetic or numerical letter of the con-

tact name. Once highlighted, push the

MENU/ENTER dial to select the letter.

.

Cellular phone is disconnected.

The registered cellular phone is deleted

from the audio system.

4. After entering the last number, highlight

the icon and push the MENU/ENTER

dial to dial the number.

3. The display will show the corresponding

contact name(s). Where necessary, use the

MENU/ENTER dial to scroll further for the

appropriate contact name to call.

1. Push the

panel.

button on instrument

Redial:

To redial or call the last number dialed, push

and hold the button on the instrument

panel or the steering wheel for more than 2

seconds.

2. Turn the MENU/ENTER dial to highlight

“Phone Book” and push the MENU/ENTER

dial.

4. The screen will show the number to be

dialed. Push the MENU/ENTER dial to dial

the number.

3. Scroll down through the list, select the

appropriate contact name (highlighted),

and push the MENU/ENTER dial.

Manually dialing a phone number:

Using call history (Call list menu):

4. The screen will show the number to be

dialed. Push the MENU/ENTER dial to dial

the number.

If more than one number is registered,

select an appropriate icon.

.

: Home

.

: Cellular phone

.

: Office

Quick searching the phonebook:

JVH1196X

JVH0860X

To dial a phone number manually, perform the

following operation:

A number from the dialed, received, or missed

call lists can also be used to make a call.

1. Push the

button on the instrument

1. Push the button on the instrument

panel and select “Call List” on the display.

panel and turn the MENU/ENTER dial to

highlight “Dial Number”.

2. Turn the MENU/ENTER dial and scroll to an

item, and push the MENU/ENTER dial to

select an item.

2. Push the MENU/ENTER dial to select “Dial

Number”.

3. Turn the MENU/ENTER dial to scroll along

and highlight each number of the phone

number. Push the MENU/ENTER dial to

select the highlighted number.

Available items:

JVH0858X

Display screen, heater and air conditioner, and audio system 4-79

.

Dialed

and the second call.

Using the MENU/ENTER dial, highlight “Settings”

from the phone menu and push the MENU/

ENTER dial.

Use the dialed call mode to make a call

which is based on the list of outgoing

(dialed) calls.

Ending a call

To end an active call, highlight the

and push the ENTER/MENU dial or push the

button on the steering wheel.

icon

Volume settings and manually downloading

the phonebook can be done using this menu.

Received

Menu operation:

Use the received call mode to make a call

which is based on the list of received

calls.

Standby mode operation (for models with DAB)

Turn the MENU/ENTER dial to change the

highlighted item and to change the volume

settings.

The audio system is in the standby mode when

the audio system is not active but the clock is

displayed on the screen.

Missed

Push the MENU/ENTER dial to select the high-

lighted item and to apply the setting.

Use the missed call mode to make a call

which is based on the list of missed calls.

When a phone device is connected to the in-

vehicle audio system via Bluetooth® with the

audio system in the standby mode, the audio

system will turn on automatically under the

following instances.

Menu items:

3. Scroll to the preferred phone number and

push the MENU/ENTER dial or the

button on the instrument panel.

.

Volume

— Ring

Set the phone ringing volume.

— Call

Set the volume of the conversation

during a call.

Ringtone

— Car

Switch the ringtone to ring from the

vehicle or the cellular phone.

— Phone

Second incoming call

.

The connected phone receives an incom-

ing call

.

An outgoing call is made with the con-

nected phone

.

The Bluetooth® Hands-Free Phone System

operation will become possible on the audio

system once it is turned on. The audio system

will automatically return to the standby mode

after the call is hung up.

Switch the phone ringing volume on or

off.

GENERAL SETTINGS

.

PB download

JVH0861X

Download the phonebook of the mobile

device to the audio unit manually.

Whenever there is a second incoming call is

shown in the display. By selecting the

icon

the call is accepted and the current call is put

on hold.

Selecting the

icon using the MENU/ENTER

dial rejects the second incoming call. When this

is done during the conversation it ends the call.

Selecting the icon using the MENU/ENTER

dial switches the call on line between the first

JVH0862X

4-80 Display screen, heater and air conditioner, and audio system

Bluetooth® HANDS-FREE PHONE

SYSTEM (for type B audio)

You can connect up to 5 different Bluetooth®

cellular phones to the in-vehicle phone module.

However, you can talk on only one cellular

phone at a time.

.

If the hands-free phone system seems to

be malfunctioning, see www.nissanusa.

com/bluetooth for troubleshooting help.

WARNING:

.

Use a phone after stopping your vehicle

in a safe location. If you have to use a

phone while driving, exercise extreme

caution at all times so full attention may

be given to vehicle operation.

Some cellular phones or other devices may

cause interference or a buzzing noise to

come from the audio system speakers.

Storing the device in a different location

may reduce or eliminate the noise.

Before using the Bluetooth® Hands-Free Phone

System, refer to the following notes.

.

Set up the wireless connection between a

compatible cellular phone and the in-vehi-

cle phone module before using the hands-

free phone system.

If you are unable to devote full attention

to vehicle operation while talking on the

phone, pull off the road to a safe location

and stop your vehicle.

.

Refer to the cellular phone owner’s manual

regarding the telephone charges, cellular

phone antenna and body, etc.

.

Some Bluetooth® enabled cellular phones

may not be recognized or work properly.

For information about Bluetooth® devices

that are available for use with this system,

contact a NISSAN dealer.

REGULATORY INFORMATION

FCC Regulatory information

CAUTION:

To avoid draining the vehicle battery, use a

phone after starting the engine.

.

CAUTION: To maintain compliance with

FCC’s RF exposure guidelines, use only the

supplied antenna. Unauthorized antenna,

modification, or attachments could da-

mage the transmitter and may violate

FCC regulations.

.

You will not be able to use a hands-free

phone under the following conditions:

Your vehicle is equipped with the Bluetooth®

a

— Your vehicle is outside of the cellular

service area.

Hands-Free Phone System. If you have

compatible Bluetooth® enabled cellular phone,

you can set up the wireless connection be-

tween your cellular phone and the in-vehicle

phone module. With Bluetooth® wireless tech-

nology, you can make or receive a hands-free

telephone call with your cellular phone in the

vehicle.

— Your vehicle is in an area where it is

difficult to receive a cellular signal; such

.

Operation is subject to the following two

conditions:

as in

a

tunnel, in an underground

parking garage, near a tall building or

in a mountainous area.

1) this device may not cause interference

and

.

When the radio wave condition is not ideal

or ambient sound is too loud, it may be

difficult to hear the other person’s voice

during a call.

2) this device must accept any interfer-

ence, including interference that may

cause undesired operation of the de-

vice.

Once your cellular phone is connected to the

in-vehicle phone module, no other phone

connecting procedure is required. Your phone

is automatically connected with the in-vehicle

phone module when the ignition switch is

placed in the “ON” position with the previously

connected cellular phone turned on and car-

ried in the vehicle.

Do not place the cellular phone in an area

surrounded by metal or far away from the

in-vehicle phone module to prevent tone

quality degradation and wireless connec-

tion disruption.

IC Regulatory information

.

Operation is subject to the following two

conditions:

1) this device may not cause interference,

and

.

While

a

cellular phone is connected

NOTE:

through the Bluetooth® wireless connec-

tion, the battery power of the cellular

phone may discharge quicker than usual.

The Bluetooth® Hands-Free Phone System

cannot charge cellular phones.

2) this device must accept any interfer-

ence, including interference that may

cause undesired operation of the de-

vice.

Some devices require the user to accept

connections to other Bluetooth® devices. If

your phone does not connect automatic ally

to the system, consult the phone’s owner’s

manual for details on device operation.

Display screen, heater and air conditioner, and audio system 4-81

.

This Class B digital apparatus meets all

requirements of the Canadian Interference-

Causing Equipment Regulations.

3. Phone send

Push the

session or answer an incoming call.

button:

Choosing a language

button to initiate

a

VR

You can interact with the Bluetooth® Hands-

Free Phone System using several languages

that are available. For operations to change the

language, see “Audio main operation” (P.4-55).

You can also use the button to

Bluetooth® trademark

interrupt the system feedback and give a

command at once. See “Voice commands”

(P.4-83) and “During a call” (P.4-85).

Bluetooth® is

a

trademark

owned by Bluetooth SIG, Inc.

and licensed to Visteon Cor-

poration.

Changing voice feedback volume

If you want to adjust the volume of the voice

feedback, push the volume control buttons on

the steering wheel while being provided with

feedback. You can also use the Power/VOL dial

on the audio unit.

4. Phone end

button:

While the voice recognition system is active,

push and hold the

USING THE SYSTEM

The voice recognition system allows hands-

free operation of the Bluetooth® Phone System.

button for

5

seconds to quit the voice recognition

system at any time.

Initialization

When the ignition switch is placed in the “ON”

position, voice recognition is initialized, which

Microphone:

If the vehicle is in motion, some commands

may not be available so full attention may be

given to vehicle operation.

Microphone is located near the map lights.

Manual control:

takes

a

few seconds. If the

button is

Control buttons and microphone

Control buttons

pushed before the initialization completes, the

system will announce “Hands-free phone sys-

tem not ready” and will not react to voice

commands.

While using the Voice Recognition system, it is

possible to select menu options by using the

steering wheel controls instead of speaking

voice commands. To activate manual control

mode, push the

wheel to access the phone menu and then

push the select buttons.

button on the steering

Connecting procedure:

NOTE:

The manual control mode does not allow

dialing a phone number by digits. The user

may select an entry from the Phonebook or

Recent Calls lists. To reactivate Voice Recogni-

tion, exit the manual control mode by pushing

The connecting procedure must be per-

formed when the vehicle is stationary. If the

vehicle starts moving during the procedure,

the procedure will be cancelled.

You can register up to 5 different Bluetooth®

cellular phones in the in-vehicle phone module.

However, you can talk on only one cellular

phone at a time.

and holding the

pushing the

Free Phone System.

button. At that time,

button will start the Hands

JVH1557X

1. Volume control buttons:

2. Select buttons:

To connect a phone to the Bluetooth® Hands-

Free Phone System;

While using the voice recognition system,

1. Push the ENTER/SETTING button.

push the

control the phone system.

/

buttons to manually

2. Use the TUNE·FOLDER dial to select “Blue-

tooth” and then push the ENTER/SETTING

button.

4-82 Display screen, heater and air conditioner, and audio system

3. Select “Add Phone or Device” and then push

the ENTER/SETTING button.

.

If you want to adjust the volume of the

voice feedback, push the volume control

buttons on the steering wheel while being

provided with feedback. You can also use

the Power/VOL dial on the audio unit.

Voice commands

Voice commands can be used to operate the

Bluetooth® Hands-Free Phone System. Push

4. When a message with a PIN appears on the

screen, operate the Bluetooth® phone to

enter the PIN.

the

button and say “Phone” to bring up the

phone command menu. The available options

are:

Voice Prompt Interrupt:

The connecting procedure varies according to

each phone. See the phone’s owner’s manual

for details.

In most cases you can interrupt the voice

feedback to speak the next command by

pushing the

After interrupting the system, wait for a beep

before speaking your command.

.

Call

Phonebook

button on the steering wheel.

Recent Calls

Giving voice commands

To operate voice recognition, push and release

the button located on the steering wheel.

After the tone sounds, speak a command.

Messaging (if equipped)

Show Applications (if equipped)

Select Phone

One Shot Call:

To use the system faster, you may speak the

second level commands with the main menu

command on the main menu. For example,

The command given is picked up by the

microphone, and voice feedback is given when

the command is accepted.

Call:

For more information on the “Call” command,

see “Making a call” (P.4-84).

push the

“Call Redial”.

button and after the tone say,

.

If you need to hear the available com-

mands for the current menu again, say

“Help” and the system will repeat them.

Phonebook:

Operating tips:

The following commands are available under

“Phonebook”:

To get the best performance out of the voice

recognition system, observe the following:

.

If a command is not recognized, the system

announces, “Command not recognized.

Please try again.” Make sure the command

is said exactly as prompted by the system

and repeat the command in a clear voice.

.

(a name)

.

Keep the interior of the vehicle as quiet as

possible. Close the windows to eliminate

surrounding noises (traffic noises, vibration

sounds, etc.), which may prevent the sys-

tem from recognizing voice commands

correctly.

Say a name in the phonebook to bring up a

list of options for that phonebook entry.

The system will say the name it interpreted

based on the voice command provided. If

the name is incorrect, say “Correction” to

hear another name.

.

If you want to go back to the previous

command, you can say “Go back” or “Cor-

rection” any time the system is waiting for a

response.

.

Wait until the tone sounds before speaking

a command. Otherwise, the command will

not be received properly.

Once the correct phonebook entry is iden-

tified, say “Dial” to dial the number or “Send

Text” to send

number. Say “Record Name” to record a

name for the phonebook entry. Say “Delete

Recording” to delete a recorded name for

the phonebook entry.

You can cancel

a

command when the

system is waiting for a response by saying,

“Cancel” or “Quit.” The system announces

“Cancel” and ends the VR session. You can

a

text message to that

.

Start speaking a command within 5 sec-

onds after the tone sounds.

also push and hold the

button on the

Speak in a natural voice without pausing

between words.

steering wheel for 5 seconds at any time to

end the VR session. Whenever the VR

.

List Names

session is cancelled,

a

double beep is

Speak this command to have the system

list the names in the phonebook one by

one alphabetically. Say “Dial” to dial the

number of the current name or “Send Text”

played to indicate you have exited the

system.

Display screen, heater and air conditioner, and audio system 4-83

to send a text message to that number. Say

“Next Entry” or “Previous Entry” to move

through the list alphabetically. Say “Record

Name” to record a name for the current

phonebook entry. Say “Delete Recording” to

delete a recorded name for the current

phonebook entry.

an entry in the phonebook, the name will

be displayed. Otherwise, the phone number

of the missed call will be displayed.

Select Phone or Device:

Speak this command to select a phone to use

from a list of those phones connected to the

vehicle.

Say “Dial” to call the number or “Send Text”

to send a text message to that number. Say

“Next Entry” or “Previous Entry” to move

through the list of missed calls.

Making a call

To make a call from a phone connected to the

vehicle’s Bluetooth® Hands-Free Phone System:

.

Transfer Entry

.

Outgoing Calls

This command can be used to transfer

multiple contacts at

Speak this command to list the last five

outgoing calls from the vehicle. If the call

was to an entry in the phonebook, the

name will be displayed. Otherwise, the

phone number of the outgoing call will be

displayed.

1. Push the

button.

a

time. To enable

2. The system will prompt you for a com-

mand. Say “Call”.

manual contact transfer capability, set

“Phonebook Download” to “Off” in the

Setting menu. The ability to transfer con-

tacts via the OPP Bluetooth® profile de-

pends on your mobile phone. See your

phone’s owner’s manual for details and

instructions.

3. Select one of the available voice commands

to continue:

.

Say “Dial” to call the number or “Send Text”

to send a text message to that number. Say

“Next Entry” or “Previous Entry” to move

through the list of outgoing calls.

(a name)

Speak the name of a phonebook entry to

place a call to that entry. The system will

respond with the name it interpreted

from your command and will prompt

you to confirm that the name is correct.

Say “Yes” to initiate the call or “No” to

hear another name from the phone-

book.

.

Delete Entry

Speak this command to delete an entry in

the phonebook. Choose an entry to delete

by speaking the desired name or say “List

Names”.

.

Redial

Speak this command to call the last num-

ber dialed.

Call Back

Recent Calls:

Speak this command to call the number of

the last incoming call to the vehicle.

.

Number

The following commands are available under

“Recent Calls”:

Speak this command to place a call by

inputting numbers.

Messaging (if equipped):

.

Incoming Calls

Speak this command to access text messaging

functions. For more information on these

commands, see “Text messaging” (P.4-85).

Speak this command to list the last five

incoming calls to the vehicle. If the call is

from an entry in the phonebook, the name

will be displayed. Otherwise, the phone

number of the incoming call will be dis-

played.

For 7- and 10-digit phone numbers,

speak the numbers. When finished, say

“Dial” to initiate the call. Say “Correction”

at any time in the process to correct a

misspoken or misinterpreted number.

Show Applications (if equipped):

Speak this command to display list of smart-

phone apps available.

For phone numbers with more digits or

special characters, say “Special Number”,

then speak the digits. Up to 24 digits can

be entered. Available special characters

are “star”, “pound”, “plus” and “pause”.

When finished, say “Dial” to initiate the

call. Say “Correction” at any time in the

process to correct a misspoken or mis-

Say “Dial” to call the number or “Send Text”

to send a text message to that number. Say

“Next Entry” or “Previous Entry” to move

through the list of incoming calls.

NOTE:

Compatible smartphone and registration ne-

cessary to access applications. See “Nissan-

Connect App smartphone integration” (P.4-

71) for more information.

.

Missed Calls

Speak this command to list the last five

missed calls to the vehicle. If the call is from

4-84 Display screen, heater and air conditioner, and audio system

interpreted number or character.

Redial

.

Transfer Call

.

Laws in some jurisdictions may restrict

the use of “Text-to-Speech”. Check local

regulations before using this feature.

Speak this command to transfer the call to

the handset. To transfer the call back from

the handset to the Bluetooth® Hands-Free

Phone System, push the

confirm when prompted.

.

Speak this command to dial the number

of the last outgoing call. The system will

display “Redialing (name/number)”. The

name of the phonebook entry will be

displayed if it available, otherwise the

number being redialed will be displayed.

Use the text messaging feature after

stopping your vehicle in a safe location.

If you have to use the feature while

driving, exercise extreme caution at all

times so full attention may be given to

vehicle operation.

button and

If supported by the phone, the Bluetooth®

Hands-Free Phone System allows for call wait-

ing functionality. If

another call is already active, a message will

be displayed on the screen. Push the

button to hold the active call and switch to

the second call. Push the

the second call.

a

call is received while

.

Call Back

.

If you are unable to devote full attention

to vehicle operation while using the text

messaging feature, pull off the road to a

safe location and stop your vehicle.

Speak this command to dial the number

of the last incoming call. The system will

display “Calling back (name/number)” .

The name of the phonebook entry will be

displayed if it available, otherwise the

number being called back will be dis-

played.

button to reject

NOTE:

While the second call is active, pushing the

button will allow the same commands that

available during any call as well as two addi-

tional commands:

This feature is automatically disabled if the

connected device does not support the

Message Access Profile (MAP). See the

phone’s owner’s manual for details and

instructions.

Receiving a call

.

Switch Call

When a call is received by the phone connected

to the vehicle’s Bluetooth® Hands-Free Phone

System, the call information is displayed on

either the vehicle information display or both

the vehicle information display and the control

panel display.

Speak this command to hold the second

call and switch back to the original call.

The system allows for the sending and receiv-

ing of text messages through the vehicle

interface.

.

End Other Call

Speak this command to stay with the

second call and end the original call.

Sending a text message:

Push the

the

button to accept the call. Push

button to reject the call.

Push the

the

button to accept the call. Push

button to reject the call.

1. Push the

button.

2. Say “Messaging”.

3. Say “Send Text”.

Ending a call

To end an active call, push the

During a call

While a call is active, push the

access additional options. Speak one of the

following commands:

button.

4. The system will provide a list of available

commands in order to determine the

recipient of the text message. Choose from

the following:

button to

Text messaging

.

Send

WARNING:

.

(A name)

Speak this command followed by the digits

to enter digits during the phone call.

.

Laws in some jurisdictions may restrict

.

Number

the use of some of the applications and

features, such as social networking and

texting.

Incoming Calls

Outgoing Calls

.

Mute On or Mute Off

Speak the command to mute or unmute

the system.

Display screen, heater and air conditioner, and audio system 4-85

.

Missed Calls

Push the button to access the following

options for replying to the text message:

Bluetooth® SETTINGS

To access and adjust the settings for the

Bluetooth® Hands-Free Phone System:

If “Incoming Calls”, “Outgoing Calls”, or

“Missed Calls” is selected, the following

additional commands will be displayed:

.

Call Back

Speak this command to call the sender of

the text message using the Bluetooth®

Hands-Free Phone System.

1. Push the SETTING button.

.

Send Text

2. Use the TUNE·FOLDER knob to select “Blue-

tooth” and then push the ENTER/SETTING

button:

.

Send Text

sage response to the sender of the text

message.

For more information about these options,

see “Voice commands” (P.4-83).

.

Bluetooth

Select “On” or “Off” to turn the vehicle’s

Bluetooth® system on or off.

5. Once

a

recipient is chosen, the system

.

Read Text

prompts for which message to send. Five

predefined messages are available as well

as three custom messages. To choose one

of the predefined messages, speak one of

the following:

.

Add Phone or Device

Speak this command to read the text

message again.

To connect a phone to the system, see

“Connecting procedure” (P.4-82).

Previous Text

Speak this command to move to the

previous text message (if available).

.

Delete Phone or Device

.

“Driving, can’t text”

Select to delete

a

phone from the

Next Text

.

“Call me”

displayed list. The system will ask to

confirm before deleting the phone.

Speak this command to move to the next

text message (if available).

.

“On my way”

.

“Running late”

.

Replace Phone

.

“Okay”

NOTE:

Select to replace

a

phone from the

To send one of the custom messages, say

“Custom Message”. If more than one cus-

tom message is stored, the system will

prompt for the number of the desired

custom message. For more information

on setting and managing custom text

messages, see “Bluetooth® settings” (P.4-

86).

Text messages are only displayed if the

vehicle speed is less than 8 km/h (5 MPH).

displayed list. When a selection is made,

the system will ask to confirm before

proceeding. The recorded phonebook

for the phone being deleted will be saved

as long as the new phone’s phonebook

is the same as the old phone’s phone-

book.

For iPhone:

Before using the text messaging assistant

feature, confirm the settings of the iPhone.

1. Connect your iPhone to the Bluetooth®

Hands- Free Phone System.

.

Select Phone or Device

2. Disconnect iPhone from the Bluetooth®

settings menu. See “Bluetooth® settings”

(P.4-86) for more details.

Reading a received text message:

Select to connect to a previously con-

nected phone from the displayed list.

1. Push the

button.

Phonebook Download

2. Say “Messaging”.

3. Say “Read Text”.

3. Turn “Show Notification” on from the Blue-

tooth® setting menu on your iPhone.

Select to turn on or off the automatic

download of a connected phone’s pho-

nebook.

The text message, sender and delivery time are

shown on the screen. Use the select buttons on

the steering wheel to scroll through all text

messages if more than one are available. Push

4. Place the ignition switch in the “OFF”

position, and then place the ignition switch

in the “ACC” or “ON” position after waiting

approximately 3 minutes.

.

Show Incoming Calls

Select “Driver Only” to have incoming call

the

button to exit the text message screen.

4-86 Display screen, heater and air conditioner, and audio system

Bluetooth® HANDS-FREE PHONE

SYSTEM (for type C audio)

information displayed only in the vehicle

information display. Select “Both” to have

incoming call information displayed in

both the vehicle information display and

the center display screen

message to the sender when

message is received while driving.

a

text

WARNING:

.

Use a phone after stopping your vehicle

in a safe location. If you have to use a

phone while driving, exercise extreme

caution at all times so full attention may

be given to vehicle operation.

Auto Reply Message

Select to choose the message that is

sent when the Auto Reply function is

enabled. Choose from “I’m Driving” or one

of the three custom messages stored in

the system.

.

Text Message

Select to turn on or off the vehicle’s text

messaging feature.

If you find yourself unable to devote full

attention to vehicle operation while talk-

ing on the phone, pull off the road to a

safe location and stop your vehicle be-

fore doing so.

New Text Sound

Vehicle Signature On/Off

Select to adjust the volume of the sound

that plays when a new text is received by

a phone connected to the Bluetooth®

Hands-Free Phone System. The setting

all the way to the left indicates that the

new text sound will be muted.

Select to choose whether or not the

vehicle signature is added to outgoing

text messages from the vehicle. This

message cannot be changed or custo-

mized.

CAUTION:

To avoid draining the vehicle battery, use a

phone after starting the engine.

.

Show Incoming Text

Select “Driver Only” to have incoming

text messages displayed only in the

vehicle information display. Select “Both”

to have incoming text messages dis-

played in both the vehicle information

display and the center display screen.

Select “None” to have no display of

incoming text messages.

Your vehicle is equipped with the Bluetooth®

Hands-Free Phone System. If you have

a

compatible Bluetooth® enabled cellular phone,

you can set up the wireless connection be-

tween your cellular phone and the in-vehicle

phone module. With Bluetooth® wireless tech-

nology, you can make or receive a hands-free

telephone call with your cellular phone in the

vehicle.

.

Edit Custom Messages

Select to set a custom message that will

be available with the standard options

when sending a text message. To set a

custom message, send a text message

to your own phone number while the

phone is connected to the system. Three

custom messages can be set. Custom

messages can only be set while the

vehicle is stationary.

Once your cellular phone is connected to the

in-vehicle phone module, no other phone

connecting procedure is required. Your phone

is automatically connected with the in-vehicle

phone module when the ignition switch is

placed in the “ON” position with the previously

connected cellular phone turned on and car-

ried in the vehicle.

NOTE:

.

Auto Reply

Some devices require the user to accept

connections to other Bluetooth® devices. If

your phone does not connect automatically

to the system, consult the phone’s owner’s

Select to turn on or off the Auto Reply

function. When enabled, the vehicle will

automatically send

a

predefined text

Display screen, heater and air conditioner, and audio system 4-87

manual for details on device operation.

cannot charge cellular phones.

3. Phone send

Push the

session or answer an incoming call.

button:

.

Some cellular phones or other devices may

cause interference or a buzzing noise to

come from the audio system speakers.

Storing the device in a different location

may reduce or eliminate the noise.

You can connect up to 5 different Bluetooth®

cellular phones to the in-vehicle phone module.

However, you can talk on only one cellular

phone at a time.

button to initiate a phone

4. Phone end

Push the

button:

button to end a phone call or

Before using the Bluetooth® Hands-Free Phone

System, refer to the following notes.

to stop the system from providing voice

prompts.

Refer to the cellular phone owner’s manual

regarding the telephone charges, cellular

phone antenna and body, etc.

.

Set up the wireless connection between a

compatible cellular phone and the in-vehi-

cle phone module before using the hands-

free phone system.

Microphone:

Microphone is located near the map lights.

REGULATORY INFORMATION

Bluetooth® trademark

Choosing a language

.

Some Bluetooth® enabled cellular phones

may not be recognized or work properly.

For details, consult a NISSAN dealer.

You can interact with the Bluetooth® Hands-

Free Phone System using several languages

that are available. For operations to change the

language, see “Audio main operation” (P.4-61).

Bluetooth® is

a

trademark

owned by Bluetooth SIG, Inc.

and licensed to Visteon Cor-

poration.

You will not be able to use a hands-free

phone under the following conditions:

— Your vehicle is outside of the cellular

service area.

Changing voice feedback volume

USING THE SYSTEM

Control buttons:

If you want to adjust the volume of the voice

feedback, push the volume control buttons on

the steering wheel while being provided with

feedback. You can also use the Power/VOL dial

on the audio unit.

— Your vehicle is in an area where it is

difficult to receive a cellular signal; such

as in

a

tunnel, in an underground

parking garage, near a tall building or

in a mountainous area.

Initialization

— Your cellular phone is locked to prevent

it from being dialed.

When the ignition switch is placed in the “ACC”

or “ON” position, the Bluetooth® Hands-Free

Phone System is initialized which takes a few

.

When the radio wave condition is not ideal

or ambient sound is too loud, it may be

difficult to hear the other person’s voice

during a call.

seconds. If the

button is pushed before the

initialization completes, the system will an-

nounce that the hands-free phone system is

not ready.

Do not place the cellular phone in an area

surrounded by metal or far away from the

in-vehicle phone module to prevent tone

quality degradation and wireless connec-

tion disruption.

JVH1557X

Connecting procedure:

1. Volume control buttons

2. Select buttons:

You can register up to 5 different Bluetooth®

cellular phones in the in-vehicle phone module.

However, you can talk on only one cellular

phone at a time.

.

While

a

cellular phone is connected

Push the

/

buttons to manually

control the Bluetooth® Hands-Free Phone

System.

through the Bluetooth® wireless connec-

tion, the battery power of the cellular

phone may discharge quicker than usual.

The Bluetooth® Hands-Free Phone System

To connect a phone to the Bluetooth® Hands-

Free Phone System;

4-88 Display screen, heater and air conditioner, and audio system

1. Push the ENTER/SETTING button.

wish to call. Select “Record Name” to record

a name for the current phonebook entry.

Select “Delete Recording” to delete a re-

corded name for the current phonebook

entry.

name will be displayed. Otherwise, the

phone number of the outgoing call will be

displayed. Select “Dial” to call the number.

Select “Next Entry” or “Previous Entry” to

move through the list of outgoing calls.

2. Use the TUNE·FOLDER dial to select “Blue-

tooth” and then push the ENTER/SETTING

button.

3. Select “Add Phone or Device” and then push

the ENTER/SETTING button.

.

Delete Entry

.

Redial

Select this command to delete an entry in

the phonebook. Choose an entry to delete.

Select this command to call the last num-

ber dialed.

4. When a message with a PIN appears on the

screen, operate the Bluetooth® phone to

enter the PIN.

Call Back

Record Name (if equipped):

Select this command to call the number of

the last incoming call to the vehicle.

The system allows you to record custom voice

tags for contact names in the phonebook. Up

to 40 voice tags can be recorded to the system.

The connecting procedure varies according to

each phone. See the phone’s owner’s manual

for details.

Show Applications (if equipped):

Select this command to display list of smart-

phone apps available.

Recent Calls:

List of commands

The following commands are available under

“Recent Calls”:

Commands can be used to operate the Blue-

tooth® Hands-Free Phone System. Push the

button to bring up the phone command

menu. The available options are:

NOTE:

.

Incoming Calls

Compatible smartphone and registration are

necessary to access the applications. See

“NissanConnect App smartphone integra-

tion” (P.4-71) for more information.

Select this command to list the last five

incoming calls to the vehicle. If the call is

from an entry in the phonebook, the name

will be displayed. Otherwise, the phone

number of the incoming call will be dis-

played.

.

Phonebook

Record Name (if equipped)

Recent Calls

Select Phone:

Select this command to select a phone to use

from a list of those phones connected to the

vehicle.

Show Applications (if equipped)

Select Phone

Select “Dial” to call the number. Select “Next

Entry” or “Previous Entry” to move through

the list of incoming calls.

Phonebook:

Making a call from the phonebook

button on the steering wheel

The following commands are available under

“Phonebook”.

.

Missed Calls

1. Push the

Select this command to list the last five

missed calls to the vehicle. If the call is from

an entry in the phonebook, the name will

be displayed. Otherwise, the phone number

of the missed call will be displayed. Select

“Dial” to call the number. Select “Next Entry”

or “Previous Entry” to move through the list

of missed calls.

and push the select buttons to select the

“Phonebook” menu.

NOTE:

Each phone has its own separate phonebook.

You cannot access Phone A’s phonebook if

you are currently connected with Phone B.

2. Push the select buttons on the steering

wheel to select the “List Names” menu.

3. Push the select buttons to select the

person you wish to call.

.

List Names

Select this command to have the system

list the names in the phonebook one by

one in alphabetical order. Select “Dial” to

dial the number of the currently selected

name. Push the select buttons to move

through the list and select the person you

4. Push the select buttons to accept the

selection. The system acknowledges the

selection and starts dialing.

.

Outgoing Calls

Select this command to list the last five

outgoing calls from the vehicle. If the call

was to an entry in the phonebook, the

Display screen, heater and air conditioner, and audio system 4-89

available during any call as well as two addi-

tional commands:

NOTE:

Redialing

1. Push the

When you delete a phone, the associated

phonebook for the phone will also be

deleted.

button on the steering wheel

and push the select buttons to select “Call”.

.

“Switch Call”

Select this command to hold the second

call and switch back to the original call.

2. Push the select buttons and select “Redial”

to call the last number dialed.

.

Replace Phone

.

“End Other Call”

Select to replace a phone from the dis-

played list. When a selection is made, the

system will ask to confirm before proceed-

ing. The recorded phonebook for the phone

being deleted will be saved as long as the

new phone’s phonebook is the same as the

old phone’s phonebook.

Receiving a call

Select this command to stay with the

second call and end the original call.

When a call is received by the phone connected

to the vehicle’s Bluetooth® Hands-Free Phone

System, the call information is displayed on

either the vehicle information display or both

the vehicle information display and the control

panel display.

Push the button to accept the call. Push

the button to reject the call.

Ending a call

To end an active call, push the

button.

.

Select Phone or Device

Push the button to accept the call. Push

the button to reject the call.

Select to connect to

nected phone from the displayed list.

a

previously con-

Bluetooth® SETTINGS

To access and adjust the settings for the

Bluetooth® Hands-Free Phone System;

Phonebook Download

During a call

While a call is active, push the

access additional options. Select one of the

following commands:

Select to turn on or off the automatic

download of a connected phone’s phone-

book.

button to

1. Push the ENTER/SETTING button.

2. Use the TUNE·FOLDER dial to select “Blue-

tooth” and then push the ENTER/SETTING

button.

.

Show Incoming Calls

.

“Mute On” / “Mute Off”

Select “Driver Only” to have incoming call

information displayed only in the vehicle

information display. Select “Both” to have

incoming call information displayed in both

the vehicle information display and the

center display screen.

Select the command to mute or unmute

the system.

Available setting items:

.

Bluetooth

.

“Transfer Call”

Select “On” or “Off” to turn the vehicle’s

Bluetooth® system on or off.

Select this command to transfer the call to

the handset. To transfer the call back from

the handset to the Bluetooth® Hands-Free

.

Add Phone or Device

For operation to connect a phone to the

system, see “Connecting procedure” (P.4-

88).

Phone System, push the

confirm when prompted.

button and

If supported by the phone, the Bluetooth®

Hands-Free Phone System allows for call wait-

.

Delete Phone or Device

ing functionality. If

a

call is received while

Select to delete a phone from the displayed

list. The system will ask to confirm before

deleting the phone.

another call is already active, a message will

be displayed on the screen. Push the

button to hold the active call and switch to

the second call. Push the

the second call.

button to reject

While the second call is active, pushing the

button will allow the same commands that are

4-90 Display screen, heater and air conditioner, and audio system

Bluetooth® HANDS-FREE PHONE

SYSTEM (for type D audio)

.

Set up the wireless connection between a

cellular phone and the in-vehicle phone

module before using the Bluetooth®

Hands-Free Phone System.

Storing the device in a different location

may reduce or eliminate the noise.

WARNING:

.

Refer to the cellular phone owner’s manual

regarding the telephone charges, cellular

phone antenna and body, etc.

.

Use a phone after stopping your vehicle

in a safe location. If you have to use a

phone while driving, exercise extreme

caution at all times so full attention may

be given to vehicle operation.

.

Some Bluetooth® enabled cellular phones

may not be recognized by the in-vehicle

phone module.

The signal strength display on the monitor

will not coincide with the signal strength

display of some cellular phones.

You will not be able to use a hands-free

phone under the following conditions:

If you are unable to devote full attention

to vehicle operation while talking on the

phone, pull off the road to a safe location

and stop your vehicle.

REGULATORY INFORMATION

Bluetooth® trademark

— Your vehicle is outside of the cellular

service area.

— Your vehicle is in an area where it is

difficult to receive cellular signal; such as

in a tunnel, in an underground parking

Bluetooth® is

a

trademark

CAUTION:

owned by Bluetooth SIG, Inc.

and licensed to Robert Bosch

GmbH.

garage, near

mountainous area.

a

tall building or in

a

To avoid discharging the vehicle battery, use

a phone after starting the engine.

— Your cellular phone is locked to prevent

it from being dialed.

CONTROL BUTTONS AND MICROPHONE

Steering wheel mounted controls:

Your vehicle is equipped with the Bluetooth®

Hands-Free Phone System. If you have

a

.

When the radio wave condition is not ideal

or ambient sound is too loud, it may be

difficult to hear the other person’s voice

during a call.

compatible Bluetooth® enabled cellular phone,

you can set up the wireless connection be-

tween your cellular phone and the in-vehicle

phone module. With Bluetooth® wireless tech-

nology, you can make or receive a hands-free

telephone call with your cellular phone in the

vehicle.

Immediately after the ignition switch is

placed in the “ON” position, it may be

impossible to receive

period of time.

a

call for

a

short

Once your cellular phone is connected to the

in-vehicle phone module, no other phone

connecting procedure is required. Your phone

is automatically reconnected with the in-vehi-

cle phone module when the ignition switch is

placed in the “ON” position with the connected

cellular phone turned on and carried in the

vehicle.

Do not place the cellular phone in an area

surrounded by metal or far away from the

in-vehicle phone module to prevent tone

quality degradation and wireless connec-

tion disruption.

JVH1553X

.

While

a

cellular phone is connected

1. Volume control buttons

through the Bluetooth® wireless connec-

tion, the battery power of the cellular

phone may discharge quicker than usual.

The Bluetooth® Hands-Free Phone System

cannot charge cellular phones.

2. Phone send

3. Phone end

button

You can register up to 5 different Bluetooth®

cellular phones to the in-vehicle phone module.

However, you can talk on only one cellular

phone at a time.

Some cellular phones or other devices may

cause interference or a buzzing noise to

come from the audio system speakers.

Before using the Bluetooth® Hands-Free Phone

System, refer to the following notes.

Display screen, heater and air conditioner, and audio system 4-91

Instrument panel:

PHONEBOOK

To access the vehicle phonebook:

RECEIVING A CALL

When a call is placed to the connected phone,

the display will change to phone mode.

1. Push the

button on the control panel.

To accept the incoming call, take one of the

following actions.

2. Select the “Contacts”/“Phonebook” key.

3. Choose the desired entry from the dis-

played list.

.

Push the

button on the steering wheel.

or icon on the

Touch the

screen.

“

”

“

”

4. The number of the entry will be displayed

on the screen. Touch the number to initiate

dialing.

To reject the incoming call, take one of the

following actions.

NOTE:

.

Push the

button on the steering wheel.

JVH0704X

To scroll quickly through the list, touch the

“A-Z” key in the upper right corner of the

screen. Turn the ENTER/Scroll dial to choose

a letter or number and then push the ENTER/

Scroll dial. The list will move to the first entry

that begins with that number or letter.

Touch the red phone “

screen.

” icon on the

1. Phone

button

DURING A CALL

While a call is active, the following options are

available on the screen:

Microphone:

Microphone is located near the map lights.

PAIRING PROCEDURE

MAKING A CALL

To make a call, follow the procedure below:

.

“Handset”

Select this option to switch control of the

phone call over to the handset.

NOTE:

1. Push the on the control panel. The

“Phone” screen will appear on the display.

The connecting procedure must be per-

formed when the vehicle is stationary. If the

vehicle starts moving during the procedure,

the procedure will be cancelled.

“Mute Mic.”

Select this option to mute the microphone.

Select again to unmute the microphone.

2. Select one of the following options to make

a call:

“

” icon

1. Push the SETUP button on the control

panel.

.

“Contacts”/“Phonebook”: Select the

name from an entry stored in the vehicle

phonebook.

Select to end the phone call.

2. Select the “Phone & Bluetooth”/“Telephone

& Bluetooth” key.

ENDING A CALL

To end a phone call, select the red phone “

icon on the screen or push the

the steering wheel.

.

“Call Lists”: Select the name from the

incoming, outgoing or missed.

”

button on

3. Select the “Pair New Device”/ “Connect New

Device” key.

.

“Redial”: Dial the last outgoing call from

the vehicle.

4. Initiate the pairing process from the hand-

set. The system will display the message

asking if PIN is displayed on your Blue-

tooth® device. If the PIN is displayed on your

Bluetooth® device, select “Yes” to complete

the pairing process.

.

“

”: Input the phone number manually

using a keypad displayed on the screen.

For information on how to use the

touchscreen, see “Touch screen opera-

tion” (P.4-5).

For more information, see the Bluetooth®

device’s owner’s manual.

4-92 Display screen, heater and air conditioner, and audio system

VOICE RECOGNITION SYSTEM (if equipped)

For models with NissanConnect Owner’s Man-

ual:

Bluetooth® SETTINGS

To access the Bluetooth® settings screen:

TELEPHONE SETUP

To access the phone settings screen:

Refer to NissanConnect Owner’s Manual for the

voice recognition system operations.

1. Push the SETUP button.

2. Touch the “Phone & Bluetooth”/“Telephone

& Bluetooth” key.

2. Touch the “Phone & Bluetooth”/“Telephone

& Bluetooth” key.

The Voice Recognition system allows hands-

free operation of the systems equipped on this

vehicle, such as the phone and navigation

systems.

Available setting items:

3. Touch the “Telephone Setup” key.

.

Telephone Setup/Phone Settings

Available setting items:

To operate the Voice Recognition system, push

the

See “Telephone setup” (P.4-93) for details.

Pair New Device/Connect New Phone

.

Sort Phonebook By:

button located on the steering wheel.

.

Select “First Name” or “Last Name” to

choose how phonebook entries are alpha-

betically displayed on the screen.

When prompted, speak the command for the

system you wish to activate. The command

given is picked up by the microphone and

performed when it is properly recognized. The

Voice Recognition will provide a voice response

as well as a message in the center display to

inform you of the command results.

Select to pair a new Bluetooth® device to

the Bluetooth® Hands-Free Phone System.

.

Select Paired Device/Select Connected

Device

From Phonebook/Use Phonebook from:

Select “Phone” to use the handset’s phone-

book. Select “SIM” to use the phonebook on

the SIM card. Select “Both” to use both

sources.

Select to choose a Bluetooth® device from

a list of those devices paired to the Blue-

tooth® Hands-Free Phone System.

CONTROL BUTTONS AND MICROPHONE

Steering wheel mounted controls:

Replace Paired Device/Replace Con-

nected Device

.

Download Phonebook Now:

Select to download the phonebook to the

vehicle from the chosen source.

Select to replace a phone from the dis-

played list. When a selection is made, the

system will ask to confirm before proceed-

ing. The recorded phonebook for the phone

being deleted will be saved as long as the

new phone’s phonebook is the same as the

old phone’s phonebook.

Phone Notifications for:

Select “Driver” to have phone notifications

shown in the vehicle information display.

Select “Both” to have phone notifications

shown in both the vehicle information

display and the center display screen.

.

Delete Paired Device/Delete Connected

Device

Select to delete a Bluetooth® device from a

list of those devices connected/paired to

the Bluetooth® Hands-Free Phone System.

JVH1555X

Bluetooth

1.

Back

Talk

button

Select to toggle Bluetooth® on and off.

2.

3.

Cancel

button

Display screen, heater and air conditioner, and audio system 4-93

Microphone:

Power/VOLUME dial on the control panel.

following systems:

Operation on the control panel display:

Microphone is located near the map lights.

.

Bluetooth® Hands-Free Phone System

The voice command screen can also be ac-

cessed using the control panel display

Navigation

Audio

USING THE SYSTEM

Initialization

1. Push the INFO button on the control panel.

2. Touch the “Voice Commands” key.

Information

My Apps

When the ignition switch is in the “ON” position,

the Voice Recognition system is initialized,

which takes a few seconds. When completed,

the system is ready to accept voice commands.

For additional information on the navigation

system, see the separate Navigation System

Owner’s Manual.

Operating tips

To get the best performance out of the Voice

Recognition system, observe the following:

If the

button is pushed before the initi-

How to say numbers

alization completes, the system will announce

that the system is not ready for voice recogni-

tion session.

.

Keep the interior of the vehicle as quiet as

possible. Close the windows to eliminate

the surrounding noises (traffic noises, vi-

bration sounds, etc.), which may prevent

the system from recognizing the voice

commands correctly.

The Voice Recognition system requires a cer-

tain way to speak numbers in voice commands.

Refer to the following examples.

Giving voice commands

General rule: Either “zero” or “oh” can be used

for “0”.

1. Push the

2. The system announces and prompts you to

speak command. list of available

button.

.

Wait until a tone sounds before speaking a

command. Otherwise, the command will

not be received properly.

Phone numbers

a

A

Speak phone numbers according to the follow-

ing example. For 1-800-662-6200, say dial

number and then speak the phone number in

any of the following formats:

commands is then spoken by the system.

.

Start speaking

seconds after the tone sounds.

a

command within 3.5

3. After the tone sounds and the face icon on

the display changes, speak a command.

Refer to “Voice commands” (P.4-95) for the

available commands.

Speak in a natural voice without pausing

between words.

.

“one eight oh oh six six two six two oh oh”

“one eight hundred six six two six two oh

oh”

4. Voice and display feedback are provided

when the command is accepted.

SYSTEM FEATURES

.

“one eight zero zero six six two six two oh

oh”

.

Push the button on the instrument

panel to return to the previous screen.

For the best voice recognition phone dialing

results, say phone numbers as single digits.

Also, full numbers can only be spoken for “800”.

For example, you cannot say 555-6000 as “five

five five six thousand”.

.

If the command is not recognized, the

system announces provides a list of avail-

able selections.

.

If you want to cancel the command or go

back to the previous menu of commands,

push the

button.

.

Push the button to move back through

the menus displayed on the screen.

If you want to adjust the volume of the

voice feedback, use the volume control

switches on the steering wheel or the

JVH0865X

The Voice Recognition system can activate the

4-94 Display screen, heater and air conditioner, and audio system

entry. Say “Send Text” to send

a

text

VOICE COMMANDS

Navigation commands

The following voice commands are available for

the Navigation System:

message to the number of the phonebook

entry. Say “Next Entry” to skip to the next

alphabetical entry in the vehicle phone-

book, where the same options will then be

available.

Bluetooth® Hands-Free Phone System

commands

To access the Bluetooth® Hands-Free Phone

System voice commands:

.

Street Address (address)

Points of Interest (name)

POI by Category

Home

.

Recent Calls

1. Push the

button.

The system prompts for an additional

command. Say “Missed Calls”, “Incoming

Calls” or “Outgoing Calls” to display a list

of such calls on the screen.

2. Say “Call” and then a name in the vehicle

phonebook to call that entry. Otherwise,

say “Phone” to access various phone com-

mands.

Address Book

Previous Destinations

Enter Address in Steps

Cancel Route

Speak the number of the entry displayed

on the screen to dial that number or say

“Next Page” to view entries on the next

page (if available).

If the Bluetooth® has been set to “Off”, the

system will ask if you wish to turn the Blue-

tooth® on.

For more information about these commands,

see the separate Navigation System Owner’s

Manual.

.

Redial

If no phone is connected to the system and the

vehicle is stationary, the system will ask if you

wish to connect a phone. Say “Yes” to connect a

phone. All further Bluetooth® Hands-Free

Phone System voice commands are only avail-

able if a phone is connected.

Redials the last called number.

Read Text

Audio commands

To access the audio system voice commands:

Reads an incoming text message. For more

information about text messaging with the

Bluetooth® Hands-Free Phone System, see

“Bluetooth® Hands-Free Phone System (for

type D audio)” (P.4-91).

1. Push the

button.

2. Say “Audio”.

If a phone is connected and Bluetooth® is set to

“On”, the following voice commands are avail-

able:

3. Speak

a

available commands:

command from the following

.

Send Text

.

Play (AM, FM, etc.)

Sends a text message. For more informa-

tion about text messaging with the Blue-

tooth® Hands-Free Phone System, see

“Bluetooth® Hands-Free Phone System (for

type D audio)” (P.4-91).

.

Call (a name)

Allows user to select radio band

Speak the name of the contact in which

you are trying to call. System will confirm

correct contact. Say “Dial” to initiate dialing.

.

Tune AM (number)

Allows user to tune directly to a desired

AM frequency

.

Dial Number

Select Phone

.

Allows for up to 24 digits to be dialed. After

the number is entered, say “Dial” to initiate

dialing. Say “Correction” to correct the

number entered. Say “Go Back” to return

to the main menu.

Tune FM (number)

The system prompts you to use manual

controls to continue. Use manual controls

to change the active phone from among

the listed phones connected to the vehicle.

Allows user to tune directly to a desired

FM frequency

.

CD Track (number)

For more information about the Bluetooth®

Hands-Free Phone System, see “Bluetooth®

Hands-Free Phone System (for type D audio)”

(P.4-91).

Allows user to select track to be played

.

List Phonebook

.

Starting with the first alphabetical entry in

the vehicle phonebook, the system

prompts for an additional command. Say

“Dial” to call the number of the phonebook

Play Song (name)

Allows user to select song name to be

played

Display screen, heater and air conditioner, and audio system 4-95

.

Play Artist (name)

Allows user to select artist to be played

Play Album (name)

Allows user to select album name to be

played

For more information about the audio system,

see “Audio system” (P.4-39).

My Apps commands

Many Apps can be accessed using this voice

command. See “NissanConnect App smart-

phone integration” (P.4-71) for more informa-

tion.

Help commands

The following voice commands can be spoken

to have the system provide instructions and

tips for using the Voice Recognition system.

.

List Commands

What Can I Say?

General Help

Quit

Exit

4-96 Display screen, heater and air conditioner, and audio system

TROUBLESHOOTING GUIDE

The system should respond correctly to all voice commands without difficulty. If problems are encountered, follow the solutions given in this guide for

the appropriate error. Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved.

Symptom/error message

Solution

Ensure that the command format is valid. Use the “List Commands” or “What Can I Say?”

command under the “Help” menu.

The system fails to recognize the command

correctly.

1.

Speak clearly without pausing between words and at a level appropriate to the ambient noise

level.

Ensure that the ambient noise level is not excessive (for example, with the windows open or the

defogger turned on).

2.

3.

NOTE:

If it is too noisy to use the phone, it is likely that voice commands will not be recognized.

If optional words of the command have been omitted, then the command should be tried with

these in place.

4.

Display screen, heater and air conditioner, and audio system 4-97

MEMO

4-98 Display screen, heater and air conditioner, and audio system

Display screen, heater and air conditioner, and audio system for Your Nissan X Trail SUV Fourth Generation (2022-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals