2022-2026 Nissan X Trail SUV Display screen, heater and air conditioner, and audio system -> Moving Object Detection (MOD) function (if equipped) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Display screen, heater and air conditioner, and audio system -> Moving Object Detection (MOD) function (if equipped) for Your Nissan X Trail SUV Fourth Generation (2022-2026)

the parking sensor (sonar) (if equipped)  
detects that the vehicle is approaching an  
object.  
WARNING:  
MOVING OBJECT DETECTION (MOD)  
FUNCTION (if equipped)  
The Moving Object Detection (MOD) system can  
inform the driver of moving objects when  
driving out of garages, maneuvering into park-  
ing lots and in other such instances.  
.
.
The parking sensor (sonar) function is not  
designed to prevent the object.  
The display will switch back to the previously  
displayed screen from the Intelligent Around  
View Monitor/Around View Monitor screen  
when:  
The colors of the parking sensor (sonar)  
indicator and the distance guide lines in  
the front/rear view indicate different  
distances to the object.  
.
The shift lever is in the “D” (Drive) position  
(CVT/DCT model) or the shift lever is out of  
the “R” (Reverse) position (MT model), and  
the vehicle speed increases above approxi-  
mately 10 km/h (6 MPH).  
The MOD system detects moving objects by  
using image processing technology on the  
image shown on the display.  
.
.
Inclement weather may affect the func-  
tion of the parking sensor (sonar) system;  
this may include reduced performance or  
a false activation.  
The MOD system operates in the following  
conditions when the camera view is displayed:  
.
A different screen is selected (when the  
shift lever is not in the “R” (Reverse) posi-  
tion).  
This function is designed as an aid to the  
driver in detecting large stationary ob-  
jects to help avoid damaging the vehicle.  
The system will not detect small objects  
below the bumper, and may not detect  
objects that are too close to the bumper  
or on the ground.  
.
When the shift lever is in the “P” (Park) or “N”  
(Neutral) position (CVT/DCT model) or the  
shift lever is out of the “R” (Reverse) position  
(MT model) and the vehicle is stopped, the  
MOD system detects the moving objects in  
the bird’s-eye view. The MOD system will  
not operate if the outside mirror is moving  
in or out or if either door is opened.  
CAMERA AIDING PARKING SENSOR (so-  
nar) FUNCTION (if equipped)  
When the vehicle moves closer to the object  
while the Intelligent Around View Monitor/  
Around View Monitor is displayed, an indicator  
is displayed and a tone is sounded by the  
parking sensor (sonar) function to warn the  
driver.  
.
If your vehicle sustains damage to the  
bumper fascia, leaving it misaligned or  
bent, the sensing zone may be altered  
causing inaccurate measurement of ob-  
stacles or false alarms.  
.
.
When the shift lever is in the “D” (Drive)  
position (CVT/DCT model) or the shift lever  
is out of the “R” (Reverse) position (MT  
model), and the vehicle speed is below  
approximately 8 km/h (5 MPH), the MOD  
system detects moving objects in the front  
view.  
The color of the parking sensor (sonar) indica-  
tor and the pattern of the tone vary according  
to the distance to the object.  
CAUTION:  
.
.
Keep the interior of the vehicle as quiet as  
possible to hear the tone clearly.  
Keep the parking sensor (sonar) (located on the  
front (if equipped) and rear bumper fascia) free  
from snow, ice and large accumulations of dirt.  
Do not clean the sensors (sonar) with sharp  
objects. If the sensors (sonar) are covered, the  
accuracy of the parking sensor (sonar) function  
will be diminished.  
When the shift lever is in the “R” (Reverse)  
position and the vehicle speed is below  
approximately 8 km/h (5 MPH), the MOD  
system detects moving objects in the rear  
view. The MOD system will not operate  
correctly if the back door is open.  
The front and rear parking sensors (so-  
nar) detect the distance between the  
vehicle and the obstacle by detecting  
the sound wave reflected from the sur-  
face of the obstacle. When there is  
a
The MOD system does not detect moving  
objects in the front-side view. The MOD icon is  
not displayed on the screen when in this view.  
sound such as horn, or an ultrasonic  
source (such as parking sensors of other  
vehicles) around the vehicle, the sensor  
(sonar) may not detect objects properly.  
The tone sound and the sensor (sonar) indica-  
tor display can be turned on/off, and the  
volume of the tone sound and the sensor  
(sonar) detection range can be adjusted. (See  
“Driver Assistance” (P.2-22).)  
Display screen, heater and air conditioner, and audio system 4-17  
.
When the ignition switch is placed in the  
“OFF” position and then back to the “ON”  
position.  
WARNING:  
.
The MOD system is not a substitute for  
proper vehicle operation and does not  
prevent contact with the objects sur-  
rounding the vehicle. When maneuvering,  
always use the outside mirror and inside  
rearview mirror and turn and look to  
check the surroundings to make sure it  
is safe to maneuver.  
The MOD system can be set to remain inactive  
in the vehicle information display. (See “Driver  
Assistance” (P.2-22).)  
WARNING:  
.
.
Excessive noise (for example, audio sys-  
tem volume or open vehicle window) will  
interfere with the chime sound, and it  
may not be heard.  
.
The system is deactivated at speeds  
above 10 km/h (6 MPH). It is reactivated  
at lower speeds.  
JVH0873X  
front view / rear view  
In the bird’s-eye view, the yellow frame  
is  
The MOD system performance will be  
limited according to environmental con-  
ditions and surrounding objects such as:  
.
.
The system is not designed to prevent  
contact with all objects.  
displayed on each camera image (front, rear,  
right, left) depending on where moving objects  
are detected.  
The MOD system is not designed to  
detect surrounding stationary objects.  
— When there is low contrast between  
background and the moving objects.  
The yellow frame  
front view or rear view modes.  
is displayed on view in the  
When the MOD system detects a moving object  
surrounding the vehicle, the yellow frame will  
be displayed on the view where the objects are  
detected and a chime will sound once. While  
the MOD system continues to detect moving  
objects, the yellow frame continues to be  
displayed.  
— When there is blinking source of light.  
While the sensor (sonar) is beeping, the MOD  
system does not chime.  
— When strong light such as another  
vehicle’s headlight or sunlight is pre-  
sent.  
The MOD icon is displayed in blue in the view  
where the MOD system is operative. The MOD  
icon is displayed in gray in the view where  
the MOD system is not operative.  
— When there is dirt, water drops or  
snow on the camera lens.  
— When the position of the moving  
objects in the display is not changed.  
If the MOD system is turned off, the MOD icon  
is not displayed.  
.
The MOD system might detect flowing  
water droplets on the camera lens, white  
smoke from the muffler, moving sha-  
dows, etc.  
The MOD system will activate automatically  
under the following conditions:  
.
When the shift lever is in the “R” (Reverse)  
position.  
.
.
The MOD system may not function prop-  
erly depending on the speed, direction,  
distance or shape of the moving objects.  
.
When the CAMERA button (if equipped)/  
DISP button (if equipped) is pushed to  
switch from  
camera view on the display.  
a
different screen to the  
If your vehicle sustains damage to the  
parts where the camera is installed, leav-  
ing it misaligned or bent, the sensing  
zone may be altered and the MOD system  
may not detect objects properly.  
JVH0872X  
.
When vehicle speed decreases below ap-  
proximately 8 km/h (5 MPH).  
bird’s-eye view  
4-18 Display screen, heater and air conditioner, and audio system  

Related Topics

Popular Owner Manuals